From: Tim Harvey <tharvey@gateworks.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/14] imx: ventana: add support for Z101WX01 LVDS display
Date: Mon, 4 Feb 2019 13:10:51 -0800 [thread overview]
Message-ID: <20190204211100.11004-6-tharvey@gateworks.com> (raw)
In-Reply-To: <20190204211100.11004-1-tharvey@gateworks.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
board/gateworks/gw_ventana/gw_ventana.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index e1ad0fc9a0..adccad8032 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -424,7 +424,29 @@ struct display_info_t const displays[] = {{
.vsync_len = 10,
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
-} } };
+} }, {
+ .bus = 2,
+ .addr = 0x5d,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .mode = {
+ .name = "Z101WX01",
+ .refresh = 60,
+ .xres = 1280,
+ .yres = 800,
+ .pixclock = 15385, /* 64MHz */
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+ }
+},
+};
size_t display_count = ARRAY_SIZE(displays);
static void setup_display(void)
--
2.17.1
next prev parent reply other threads:[~2019-02-04 21:10 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-04 21:10 [U-Boot] [PATCH 00/14] Gateworks Ventana updates Tim Harvey
2019-02-04 21:10 ` [U-Boot] [PATCH 01/14] imx: ventana: mv88e61xx change LED configuration Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 02/14] imx: ventana: do not iomux UART1 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot,02/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 03/14] imx: ventana: remove setup of I2C3 from SPL Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 04/14] imx: ventana: add support for GW5905 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot,04/14] " sbabic at denx.de
2019-02-04 21:10 ` Tim Harvey [this message]
2019-02-16 10:26 ` [U-Boot] [U-Boot, 05/14] imx: ventana: add support for Z101WX01 LVDS display sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 06/14] imx: ventana: skip nand init for nandless boards Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 07/14] imx: ventana: add i2c detect for all LVDS displays Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 08/14] imx: ventana: add support for GW5906 Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot,08/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 09/14] imx: ventana: add support for GW5907 Tim Harvey
2019-02-16 10:45 ` [U-Boot] [U-Boot,09/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 10/14] imx: ventana: add support for GW5908 Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot,10/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 11/14] imx: ventana: add support for GW5909 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot,11/14] " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 12/14] imx: ventana: add support for GW5901/GW5902 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:10 ` [U-Boot] [PATCH 13/14] imx: ventana: gw5904/gw5909: disable RS485 Tim Harvey
2019-02-16 10:35 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-04 21:11 ` [U-Boot] [PATCH 14/14] imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+) Tim Harvey
2019-02-16 10:26 ` [U-Boot] [U-Boot, " sbabic at denx.de
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190204211100.11004-6-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox