From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH RFC 00/10] image: Reduce the abuse of #ifdefs in image-sig.c
Date: Fri, 14 May 2021 14:45:52 -0500 [thread overview]
Message-ID: <20210514194602.598322-1-mr.nuke.me@gmail.com> (raw)
This series is motivated by Simon's bratwurst:
[PATCH v2 00/50] image: Reduce #ifdefs and ad-hoc defines in image code
A big problem with current mkimage code, as well as the code it shares
with the targets is that it uses a lot of #ifdefs. Some of the #ifdefs
are defined based on other macros, or CONFIG_() options.
Simon's approach to fixing this is to extend Kconfig to the host-side
of mkimage, and replace ifdefs with "if (CONFIG_IS_ENABLED())"
wherever possible. This would resolve most cosmetic issues caused by
the ungodly abuse of #ifdefs.
I do not like the aforementioned approach, because I believe it is a
band-aid to a much deeper problem. I believe the fundamental problem
is the incorrect separation of target code and host code, which has
led to the accumulation of crud over the years. I believe in
refactoring the current code in order to reduce the need for decision
points and branch divergence between the host and target.
In this series I intend to demonstrate a proof-of-concept for achieving
this with respect to signing algorithms. I treat the three
image_get_*_algo() functions as an interface, and decouple the host and
target implementations. This enable a dramatic reduction of #ifdefs
decision points in image-sig.c
The existing implementation is mostly suited for the host-side, where
it is reused. On the target-side, I implement a linker-list based
array of crypto_algo structures, inspired by the DM driver lists.
Two macros are deleted, rsa.h, and ecdsa.h are completely cleaned of
#ifdefs, and the new host-side implementation of image-sig.c has
zero #ifdefs. This comes at a minimal increase in the noumber of source
lines of code.
Only image_get_crypto_algo() is implemented as a linker list in this
POC. image_get_checksum_algo() and image_get_padding_algo() would also
see healthy benefits.
Alexandru Gagniuc (10):
common: Move host-only logic in image-sig.c to separate file
common: image-sig.c: Remove host-specific logic and #ifdefs
image: Add support for placing crypto_algo in linker lists
[UNTESTED] image: Add support for relocating crypto_algos in linker
lists
image: rsa: Move verification algorithm to a linker list
image: image-sig.c: Remove crypto_algos array
lib: ecdsa: Remove #ifdefs from ecdsa.h
lib: rsa: Remove #ifdefs from rsa.h
image: Eliminate IMAGE_ENABLE_VERIFY macro
image: Eliminate IMAGE_ENABLE_VERIFY_ECDSA macro
common/image-sig-host.c | 134 ++++++++++++++++++++++++++++++++++++++++
common/image-sig.c | 71 +++++----------------
include/image.h | 13 ++--
include/u-boot/ecdsa.h | 25 --------
include/u-boot/rsa.h | 47 --------------
lib/rsa/rsa-verify.c | 16 +++++
tools/Makefile | 2 +-
7 files changed, 172 insertions(+), 136 deletions(-)
create mode 100644 common/image-sig-host.c
--
2.31.1
next reply other threads:[~2021-05-14 19:45 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-14 19:45 Alexandru Gagniuc [this message]
2021-05-14 19:45 ` [PATCH RFC 01/10] common: Move host-only logic in image-sig.c to separate file Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-17 14:19 ` Alex G.
2021-05-14 19:45 ` [PATCH RFC 02/10] common: image-sig.c: Remove host-specific logic and #ifdefs Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:45 ` [PATCH RFC 03/10] image: Add support for placing crypto_algo in linker lists Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:45 ` [PATCH RFC 04/10] [UNTESTED] image: Add support for relocating crypto_algos " Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-19 7:07 ` Michal Simek
2021-05-14 19:45 ` [PATCH RFC 05/10] image: rsa: Move verification algorithm to a linker list Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:45 ` [PATCH RFC 06/10] image: image-sig.c: Remove crypto_algos array Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:45 ` [PATCH RFC 07/10] lib: ecdsa: Remove #ifdefs from ecdsa.h Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:46 ` [PATCH RFC 08/10] lib: rsa: Remove #ifdefs from rsa.h Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:46 ` [PATCH RFC 09/10] image: Eliminate IMAGE_ENABLE_VERIFY macro Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:46 ` [PATCH RFC 10/10] image: Eliminate IMAGE_ENABLE_VERIFY_ECDSA macro Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210514194602.598322-1-mr.nuke.me@gmail.com \
--to=mr.nuke.me@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox