From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH RFC 02/10] common: image-sig.c: Remove host-specific logic and #ifdefs
Date: Fri, 14 May 2021 14:45:54 -0500 [thread overview]
Message-ID: <20210514194602.598322-3-mr.nuke.me@gmail.com> (raw)
In-Reply-To: <20210514194602.598322-1-mr.nuke.me@gmail.com>
Remove any ifdefs in image-sig.c that were previously used to
differentiate from the host code. Note that all code dedicated to
relocating ->sign() and ->add_verify_data)_ can be safely removed,
as signing is not supported target-side.
NOTE that although it appears we are removing ecdsa256 support, this
is intentional. ecdsa_verify() is a no-op on the target, and is
currently only used by host code.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
common/image-sig.c | 39 ++-------------------------------------
1 file changed, 2 insertions(+), 37 deletions(-)
diff --git a/common/image-sig.c b/common/image-sig.c
index 0f8e592aba..698b044d50 100644
--- a/common/image-sig.c
+++ b/common/image-sig.c
@@ -3,18 +3,11 @@
* Copyright (c) 2013, Google Inc.
*/
-#ifdef USE_HOSTCC
-#include "mkimage.h"
-#include <fdt_support.h>
-#include <time.h>
-#include <linux/libfdt.h>
-#else
#include <common.h>
#include <log.h>
#include <malloc.h>
#include <asm/global_data.h>
DECLARE_GLOBAL_DATA_PTR;
-#endif /* !USE_HOSTCC*/
#include <image.h>
#include <u-boot/ecdsa.h>
#include <u-boot/rsa.h>
@@ -28,9 +21,6 @@ struct checksum_algo checksum_algos[] = {
.checksum_len = SHA1_SUM_LEN,
.der_len = SHA1_DER_LEN,
.der_prefix = sha1_der_prefix,
-#if IMAGE_ENABLE_SIGN
- .calculate_sign = EVP_sha1,
-#endif
.calculate = hash_calculate,
},
{
@@ -38,9 +28,6 @@ struct checksum_algo checksum_algos[] = {
.checksum_len = SHA256_SUM_LEN,
.der_len = SHA256_DER_LEN,
.der_prefix = sha256_der_prefix,
-#if IMAGE_ENABLE_SIGN
- .calculate_sign = EVP_sha256,
-#endif
.calculate = hash_calculate,
},
#ifdef CONFIG_SHA384
@@ -49,9 +36,6 @@ struct checksum_algo checksum_algos[] = {
.checksum_len = SHA384_SUM_LEN,
.der_len = SHA384_DER_LEN,
.der_prefix = sha384_der_prefix,
-#if IMAGE_ENABLE_SIGN
- .calculate_sign = EVP_sha384,
-#endif
.calculate = hash_calculate,
},
#endif
@@ -61,9 +45,6 @@ struct checksum_algo checksum_algos[] = {
.checksum_len = SHA512_SUM_LEN,
.der_len = SHA512_DER_LEN,
.der_prefix = sha512_der_prefix,
-#if IMAGE_ENABLE_SIGN
- .calculate_sign = EVP_sha512,
-#endif
.calculate = hash_calculate,
},
#endif
@@ -74,24 +55,13 @@ struct crypto_algo crypto_algos[] = {
{
.name = "rsa2048",
.key_len = RSA2048_BYTES,
- .sign = rsa_sign,
- .add_verify_data = rsa_add_verify_data,
.verify = rsa_verify,
},
{
.name = "rsa4096",
.key_len = RSA4096_BYTES,
- .sign = rsa_sign,
- .add_verify_data = rsa_add_verify_data,
.verify = rsa_verify,
},
- {
- .name = "ecdsa256",
- .key_len = ECDSA256_BYTES,
- .sign = ecdsa_sign,
- .add_verify_data = ecdsa_add_verify_data,
- .verify = ecdsa_verify,
- },
};
struct padding_algo padding_algos[] = {
@@ -112,16 +82,13 @@ struct checksum_algo *image_get_checksum_algo(const char *full_name)
int i;
const char *name;
-#if !defined(USE_HOSTCC) && defined(CONFIG_NEEDS_MANUAL_RELOC)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
static bool done;
if (!done) {
done = true;
for (i = 0; i < ARRAY_SIZE(checksum_algos); i++) {
checksum_algos[i].name += gd->reloc_off;
-#if IMAGE_ENABLE_SIGN
- checksum_algos[i].calculate_sign += gd->reloc_off;
-#endif
checksum_algos[i].calculate += gd->reloc_off;
}
}
@@ -143,15 +110,13 @@ struct crypto_algo *image_get_crypto_algo(const char *full_name)
int i;
const char *name;
-#if !defined(USE_HOSTCC) && defined(CONFIG_NEEDS_MANUAL_RELOC)
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
static bool done;
if (!done) {
done = true;
for (i = 0; i < ARRAY_SIZE(crypto_algos); i++) {
crypto_algos[i].name += gd->reloc_off;
- crypto_algos[i].sign += gd->reloc_off;
- crypto_algos[i].add_verify_data += gd->reloc_off;
crypto_algos[i].verify += gd->reloc_off;
}
}
--
2.31.1
next prev parent reply other threads:[~2021-05-14 19:45 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-14 19:45 [PATCH RFC 00/10] image: Reduce the abuse of #ifdefs in image-sig.c Alexandru Gagniuc
2021-05-14 19:45 ` [PATCH RFC 01/10] common: Move host-only logic in image-sig.c to separate file Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-17 14:19 ` Alex G.
2021-05-14 19:45 ` Alexandru Gagniuc [this message]
2021-05-15 15:20 ` [PATCH RFC 02/10] common: image-sig.c: Remove host-specific logic and #ifdefs Simon Glass
2021-05-14 19:45 ` [PATCH RFC 03/10] image: Add support for placing crypto_algo in linker lists Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:45 ` [PATCH RFC 04/10] [UNTESTED] image: Add support for relocating crypto_algos " Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-19 7:07 ` Michal Simek
2021-05-14 19:45 ` [PATCH RFC 05/10] image: rsa: Move verification algorithm to a linker list Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:45 ` [PATCH RFC 06/10] image: image-sig.c: Remove crypto_algos array Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:45 ` [PATCH RFC 07/10] lib: ecdsa: Remove #ifdefs from ecdsa.h Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:46 ` [PATCH RFC 08/10] lib: rsa: Remove #ifdefs from rsa.h Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:46 ` [PATCH RFC 09/10] image: Eliminate IMAGE_ENABLE_VERIFY macro Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
2021-05-14 19:46 ` [PATCH RFC 10/10] image: Eliminate IMAGE_ENABLE_VERIFY_ECDSA macro Alexandru Gagniuc
2021-05-15 15:20 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210514194602.598322-3-mr.nuke.me@gmail.com \
--to=mr.nuke.me@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox