* [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board
2021-07-01 4:26 [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Tony Dinh
@ 2021-07-01 4:26 ` Tony Dinh
2021-07-01 8:14 ` Stefan Roese
2021-07-01 4:26 ` [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs Tony Dinh
` (3 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Tony Dinh @ 2021-07-01 4:26 UTC (permalink / raw)
To: Stefan Roese, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham, Tony Dinh
Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to
convert to Driver Model.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
2 files changed, 319 insertions(+)
create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 096068261d..0ff77c8b3d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
kirkwood-ns2lite.dtb \
kirkwood-ns2max.dtb \
kirkwood-ns2mini.dtb \
+ kirkwood-nsa310s.dtb \
kirkwood-openrd-base.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
diff --git a/arch/arm/dts/kirkwood-nsa310s.dts b/arch/arm/dts/kirkwood-nsa310s.dts
new file mode 100644
index 0000000000..e1c9c9080c
--- /dev/null
+++ b/arch/arm/dts/kirkwood-nsa310s.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree file for the Zyxel NSA 310S NAS box.
+ *
+ * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
+ *
+ * Based on
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ * Based upon the board setup file created by Peter Schildmann
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "Zyxel NSA310S";
+ compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-names = "default";
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins ;
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins ;
+ marvell,function = "sata1";
+ };
+
+ pmx_usb_power: pmx-usb-power {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_off: pmx-pwr-off {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_copy: pmx-btn-copy {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_power: pmx-btn-power {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd2_green: pmx-led-hdd2-green {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd2_red: pmx-led-hdd2-red {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_green: pmx-led-copy-green {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_red: pmx-led-copy-red {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_orange: pmx-led-sys-orange {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_green: pmx-led-hdd1-green {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_red: pmx-led-hdd1-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_sata1: pmx-pwr-sata1 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "ok";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ i2c@11000 {
+ status = "okay";
+ ht1382: rtc@68 {
+ compatible = "htk,ht1382";
+ reg = <0x68>;
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
+
+ usb0_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_pwr_off>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
+ button@2 {
+ label = "Copy Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+ button@3 {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+ &pmx_led_usb_green
+ &pmx_led_sys_green &pmx_led_sys_orange
+ &pmx_led_copy_green &pmx_led_copy_red
+ &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+ pinctrl-names = "default";
+
+ green-sys {
+ label = "nsa310s:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ orange-sys {
+ label = "nsa310s:orange:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd1 {
+ label = "nsa310s:green:hdd1";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd1 {
+ label = "nsa310s:red:hdd1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ green-hdd2 {
+ label = "nsa310s:green:hdd2";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
+ red-hdd2 {
+ label = "nsa310s:red:hdd2";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ green-usb {
+ label = "nsa310s:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ };
+ green-copy {
+ label = "nsa310s:green:copy";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ide-disk";
+ };
+ red-copy {
+ label = "nsa310s:red:copy";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+ chip-delay = <35>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0x0100000>;
+ };
+ partition@100000 {
+ label = "stock_uboot_env";
+ reg = <0x0100000 0x0080000>;
+ };
+ partition@180000 {
+ label = "key_store";
+ reg = <0x0180000 0x0080000>;
+ };
+ partition@200000 {
+ label = "info";
+ reg = <0x0200000 0x0080000>;
+ };
+ partition@280000 {
+ label = "etc";
+ reg = <0x0280000 0x0a00000>;
+ };
+ partition@c80000 {
+ label = "kernel_1";
+ reg = <0x0c80000 0x0a00000>;
+ };
+ partition@1680000 {
+ label = "rootfs1";
+ reg = <0x1680000 0x2fc0000>;
+ };
+ partition@4640000 {
+ label = "kernel_2";
+ reg = <0x4640000 0x0a00000>;
+ };
+ partition@5040000 {
+ label = "rootfs2";
+ reg = <0x5040000 0x2fc0000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+ ethphy0: ethernet-phy@1 {
+ compatible = "marvell,88e1510";
+ reg = <1>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board
2021-07-01 4:26 ` [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board Tony Dinh
@ 2021-07-01 8:14 ` Stefan Roese
0 siblings, 0 replies; 12+ messages in thread
From: Stefan Roese @ 2021-07-01 8:14 UTC (permalink / raw)
To: Tony Dinh, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham
On 01.07.21 06:26, Tony Dinh wrote:
> Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to
> convert to Driver Model.
>
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> ---
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
> 2 files changed, 319 insertions(+)
> create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 096068261d..0ff77c8b3d 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
> kirkwood-ns2lite.dtb \
> kirkwood-ns2max.dtb \
> kirkwood-ns2mini.dtb \
> + kirkwood-nsa310s.dtb \
> kirkwood-openrd-base.dtb \
> kirkwood-openrd-client.dtb \
> kirkwood-openrd-ultimate.dtb \
> diff --git a/arch/arm/dts/kirkwood-nsa310s.dts b/arch/arm/dts/kirkwood-nsa310s.dts
> new file mode 100644
> index 0000000000..e1c9c9080c
> --- /dev/null
> +++ b/arch/arm/dts/kirkwood-nsa310s.dts
> @@ -0,0 +1,318 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device tree file for the Zyxel NSA 310S NAS box.
> + *
> + * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
> + *
> + * Based on
> + * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
> + * Based upon the board setup file created by Peter Schildmann
> + */
> +/dts-v1/;
> +
> +#include "kirkwood.dtsi"
> +#include "kirkwood-6281.dtsi"
> +
> +/ {
> + model = "Zyxel NSA310S";
> + compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x10000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + stdout-path = &uart0;
> + };
> +
> + ocp@f1000000 {
> + pinctrl: pin-controller@10000 {
> + pinctrl-names = "default";
> +
> + pmx_sata0: pmx-sata0 {
> + marvell,pins ;
> + marvell,function = "sata0";
> + };
> +
> + pmx_sata1: pmx-sata1 {
> + marvell,pins ;
> + marvell,function = "sata1";
> + };
> +
> + pmx_usb_power: pmx-usb-power {
> + marvell,pins = "mpp21";
> + marvell,function = "gpio";
> + };
> +
> + pmx_pwr_off: pmx-pwr-off {
> + marvell,pins = "mpp27";
> + marvell,function = "gpio";
> + };
> +
> + pmx_btn_reset: pmx-btn-reset {
> + marvell,pins = "mpp24";
> + marvell,function = "gpio";
> + };
> +
> + pmx_btn_copy: pmx-btn-copy {
> + marvell,pins = "mpp25";
> + marvell,function = "gpio";
> + };
> +
> + pmx_btn_power: pmx-btn-power {
> + marvell,pins = "mpp26";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_hdd2_green: pmx-led-hdd2-green {
> + marvell,pins = "mpp34";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_hdd2_red: pmx-led-hdd2-red {
> + marvell,pins = "mpp12";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_usb_green: pmx-led-usb-green {
> + marvell,pins = "mpp15";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_copy_green: pmx-led-copy-green {
> + marvell,pins = "mpp22";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_copy_red: pmx-led-copy-red {
> + marvell,pins = "mpp23";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_sys_green: pmx-led-sys-green {
> + marvell,pins = "mpp28";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_sys_orange: pmx-led-sys-orange {
> + marvell,pins = "mpp29";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_hdd1_green: pmx-led-hdd1-green {
> + marvell,pins = "mpp16";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_hdd1_red: pmx-led-hdd1-red {
> + marvell,pins = "mpp13";
> + marvell,function = "gpio";
> + };
> +
> + pmx_pwr_sata1: pmx-pwr-sata1 {
> + marvell,pins = "mpp33";
> + marvell,function = "gpio";
> + };
> + };
> +
> + serial@12000 {
> + status = "ok";
> + };
> +
> + sata@80000 {
> + status = "okay";
> + nr-ports = <1>;
> + };
> +
> + rtc@10300 {
> + status = "disabled";
> + };
> +
> + i2c@11000 {
> + status = "okay";
> + ht1382: rtc@68 {
> + compatible = "htk,ht1382";
> + reg = <0x68>;
> + };
> + };
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
> +
> + usb0_power: regulator@1 {
> + compatible = "regulator-fixed";
> + reg = <1>;
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + enable-active-high;
> + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
> + };
> +
> + sata1_power: regulator@2 {
> + compatible = "regulator-fixed";
> + reg = <2>;
> + regulator-name = "SATA1 Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + enable-active-high;
> + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + gpio_poweroff {
> + compatible = "gpio-poweroff";
> + pinctrl-0 = <&pmx_pwr_off>;
> + pinctrl-names = "default";
> + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
> + pinctrl-names = "default";
> +
> + button@1 {
> + label = "Power Button";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
> + };
> + button@2 {
> + label = "Copy Button";
> + linux,code = <KEY_COPY>;
> + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
> + };
> + button@3 {
> + label = "Reset Button";
> + linux,code = <KEY_RESTART>;
> + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
> + &pmx_led_usb_green
> + &pmx_led_sys_green &pmx_led_sys_orange
> + &pmx_led_copy_green &pmx_led_copy_red
> + &pmx_led_hdd1_green &pmx_led_hdd1_red>;
> + pinctrl-names = "default";
> +
> + green-sys {
> + label = "nsa310s:green:sys";
> + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "default-on";
> + };
> + orange-sys {
> + label = "nsa310s:orange:sys";
> + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
> + };
> + green-hdd1 {
> + label = "nsa310s:green:hdd1";
> + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> + };
> + red-hdd1 {
> + label = "nsa310s:red:hdd1";
> + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> + };
> + green-hdd2 {
> + label = "nsa310s:green:hdd2";
> + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + };
> + red-hdd2 {
> + label = "nsa310s:red:hdd2";
> + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
> + };
> + green-usb {
> + label = "nsa310s:green:usb";
> + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
> + };
> + green-copy {
> + label = "nsa310s:green:copy";
> + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "ide-disk";
> + };
> + red-copy {
> + label = "nsa310s:red:copy";
> + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +};
> +
> +&nand {
> + status = "okay";
> + chip-delay = <35>;
> +
> + partition@0 {
> + label = "uboot";
> + reg = <0x0000000 0x0100000>;
> + };
> + partition@100000 {
> + label = "stock_uboot_env";
> + reg = <0x0100000 0x0080000>;
> + };
> + partition@180000 {
> + label = "key_store";
> + reg = <0x0180000 0x0080000>;
> + };
> + partition@200000 {
> + label = "info";
> + reg = <0x0200000 0x0080000>;
> + };
> + partition@280000 {
> + label = "etc";
> + reg = <0x0280000 0x0a00000>;
> + };
> + partition@c80000 {
> + label = "kernel_1";
> + reg = <0x0c80000 0x0a00000>;
> + };
> + partition@1680000 {
> + label = "rootfs1";
> + reg = <0x1680000 0x2fc0000>;
> + };
> + partition@4640000 {
> + label = "kernel_2";
> + reg = <0x4640000 0x0a00000>;
> + };
> + partition@5040000 {
> + label = "rootfs2";
> + reg = <0x5040000 0x2fc0000>;
> + };
> +};
> +
> +&mdio {
> + status = "okay";
> + ethphy0: ethernet-phy@1 {
> + compatible = "marvell,88e1510";
> + reg = <1>;
> + };
> +};
> +
> +ð0 {
> + status = "okay";
> + ethernet0-port@0 {
> + phy-handle = <ðphy0>;
> + };
> +};
> +
> +&pciec {
> + status = "okay";
> +};
> +
> +&pcie0 {
> + status = "okay";
> +};
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs
2021-07-01 4:26 [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Tony Dinh
2021-07-01 4:26 ` [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board Tony Dinh
@ 2021-07-01 4:26 ` Tony Dinh
2021-07-01 8:14 ` Stefan Roese
2021-07-01 4:26 ` [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree Tony Dinh
` (2 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Tony Dinh @ 2021-07-01 4:26 UTC (permalink / raw)
To: Stefan Roese, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham, Tony Dinh
Convert to Driver Model.
- Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig
- Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig
- Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig
- Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR
to nsa310s_defconfig
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---
configs/nsa310s_defconfig | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
index e4cf1c470e..fac0322e2b 100644
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@@ -7,14 +7,16 @@ CONFIG_NR_DRAM_BANKS=2
CONFIG_TARGET_NSA310S=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xE0000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="nsa310s => "
+CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server"
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
@@ -44,3 +46,11 @@ CONFIG_USB_STORAGE=y
CONFIG_LZMA=y
CONFIG_BZIP2=y
CONFIG_OF_LIBFDT=y
+CONFIG_DM=y
+CONFIG_BLK=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_USB=y
+CONFIG_DM_ETH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_CMD_SATA=y
+CONFIG_SATA_MV=y
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs
2021-07-01 4:26 ` [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs Tony Dinh
@ 2021-07-01 8:14 ` Stefan Roese
0 siblings, 0 replies; 12+ messages in thread
From: Stefan Roese @ 2021-07-01 8:14 UTC (permalink / raw)
To: Tony Dinh, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham
On 01.07.21 06:26, Tony Dinh wrote:
> Convert to Driver Model.
>
> - Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig
> - Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig
> - Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig
> - Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR
> to nsa310s_defconfig
>
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> ---
>
> configs/nsa310s_defconfig | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
> index e4cf1c470e..fac0322e2b 100644
> --- a/configs/nsa310s_defconfig
> +++ b/configs/nsa310s_defconfig
> @@ -7,14 +7,16 @@ CONFIG_NR_DRAM_BANKS=2
> CONFIG_TARGET_NSA310S=y
> CONFIG_ENV_SIZE=0x20000
> CONFIG_ENV_OFFSET=0xE0000
> +CONFIG_ENV_SECT_SIZE=0x20000
> +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s"
> CONFIG_BOOTDELAY=3
> CONFIG_USE_PREBOOT=y
> # CONFIG_DISPLAY_BOARDINFO is not set
> CONFIG_HUSH_PARSER=y
> CONFIG_SYS_PROMPT="nsa310s => "
> +CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server"
> CONFIG_CMD_BOOTZ=y
> # CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_IDE=y
> CONFIG_CMD_NAND=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> @@ -44,3 +46,11 @@ CONFIG_USB_STORAGE=y
> CONFIG_LZMA=y
> CONFIG_BZIP2=y
> CONFIG_OF_LIBFDT=y
> +CONFIG_DM=y
> +CONFIG_BLK=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM_USB=y
> +CONFIG_DM_ETH=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_CMD_SATA=y
> +CONFIG_SATA_MV=y
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree
2021-07-01 4:26 [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Tony Dinh
2021-07-01 4:26 ` [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board Tony Dinh
2021-07-01 4:26 ` [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs Tony Dinh
@ 2021-07-01 4:26 ` Tony Dinh
2021-07-01 8:19 ` Stefan Roese
2021-07-01 4:26 ` [PATCH 4/4] NSA310S : Add DM SATA configs Tony Dinh
2021-07-19 12:32 ` [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Stefan Roese
4 siblings, 1 reply; 12+ messages in thread
From: Tony Dinh @ 2021-07-01 4:26 UTC (permalink / raw)
To: Stefan Roese, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham, Tony Dinh
In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
with Ethernet PHY name from device tree.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---
board/zyxel/nsa310s/nsa310s.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c
index cd4a7723b1..29aded1910 100644
--- a/board/zyxel/nsa310s/nsa310s.c
+++ b/board/zyxel/nsa310s/nsa310s.c
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
+ * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
@@ -81,22 +82,18 @@ int board_init(void)
return 0;
}
+#define PHY_ADR 1
+
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
u16 reg;
- u16 phyaddr;
- char *name = "egiga0";
+ u16 phyaddr = PHY_ADR;
+ char *name = "ethernet-controller@72000";
if (miiphy_set_current_dev(name))
return;
- /* read PHY dev address */
- if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
- printf("could not read PHY dev address\n");
- return;
- }
-
/* set RGMII delay */
miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, ®);
@@ -131,5 +128,7 @@ void reset_phy(void)
/* downshift */
miiphy_write(name, phyaddr, 0x10, 0x3860);
miiphy_write(name, phyaddr, 0x0, 0x9140);
+
+ printf("MV88E1318 PHY initialized on %s\n", name);
}
#endif /* CONFIG_RESET_PHY_R */
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree
2021-07-01 4:26 ` [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree Tony Dinh
@ 2021-07-01 8:19 ` Stefan Roese
2021-07-01 8:22 ` Stefan Roese
0 siblings, 1 reply; 12+ messages in thread
From: Stefan Roese @ 2021-07-01 8:19 UTC (permalink / raw)
To: Tony Dinh, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham
On 01.07.21 06:26, Tony Dinh wrote:
> In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
> with Ethernet PHY name from device tree.
>
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> ---
>
> board/zyxel/nsa310s/nsa310s.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c
> index cd4a7723b1..29aded1910 100644
> --- a/board/zyxel/nsa310s/nsa310s.c
> +++ b/board/zyxel/nsa310s/nsa310s.c
> @@ -1,5 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> + * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
AFAIU, just changing a few lines, as this patch does, does not justify
to add a copyright notice to this file.
> * Copyright (C) 2015
> * Gerald Kerma <dreagle@doukki.net>
> * Tony Dinh <mibodhi@gmail.com>
> @@ -81,22 +82,18 @@ int board_init(void)
> return 0;
> }
>
> +#define PHY_ADR 1
You should be able to read this PHY address from the device-tree now.
No need to define this here again.
Thanks,
Stefan
> +
> #ifdef CONFIG_RESET_PHY_R
> void reset_phy(void)
> {
> u16 reg;
> - u16 phyaddr;
> - char *name = "egiga0";
> + u16 phyaddr = PHY_ADR;
> + char *name = "ethernet-controller@72000";
>
> if (miiphy_set_current_dev(name))
> return;
>
> - /* read PHY dev address */
> - if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
> - printf("could not read PHY dev address\n");
> - return;
> - }
> -
> /* set RGMII delay */
> miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
> miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, ®);
> @@ -131,5 +128,7 @@ void reset_phy(void)
> /* downshift */
> miiphy_write(name, phyaddr, 0x10, 0x3860);
> miiphy_write(name, phyaddr, 0x0, 0x9140);
> +
> + printf("MV88E1318 PHY initialized on %s\n", name);
> }
> #endif /* CONFIG_RESET_PHY_R */
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree
2021-07-01 8:19 ` Stefan Roese
@ 2021-07-01 8:22 ` Stefan Roese
2021-07-01 10:56 ` Tony (bodhi)
0 siblings, 1 reply; 12+ messages in thread
From: Stefan Roese @ 2021-07-01 8:22 UTC (permalink / raw)
To: Tony Dinh, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham
Hi Tony,
On 01.07.21 10:19, Stefan Roese wrote:
> On 01.07.21 06:26, Tony Dinh wrote:
>> In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
>> with Ethernet PHY name from device tree.
>>
>> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
>> ---
>>
>> board/zyxel/nsa310s/nsa310s.c | 15 +++++++--------
>> 1 file changed, 7 insertions(+), 8 deletions(-)
>>
>> diff --git a/board/zyxel/nsa310s/nsa310s.c
>> b/board/zyxel/nsa310s/nsa310s.c
>> index cd4a7723b1..29aded1910 100644
>> --- a/board/zyxel/nsa310s/nsa310s.c
>> +++ b/board/zyxel/nsa310s/nsa310s.c
>> @@ -1,5 +1,6 @@
>> // SPDX-License-Identifier: GPL-2.0+
>> /*
>> + * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
>
> AFAIU, just changing a few lines, as this patch does, does not justify
> to add a copyright notice to this file.
I just noticed that you already are present in the copyright notice
below. I suggest to change this in a way, so that your name only
occurs once, like:
* Copyright (C) 2015, 2021 Tony Dinh <mibodhi@gmail.com>
Does this make sense?
Thanks,
Stefan
>> * Copyright (C) 2015
>> * Gerald Kerma <dreagle@doukki.net>
>> * Tony Dinh <mibodhi@gmail.com>
>> @@ -81,22 +82,18 @@ int board_init(void)
>> return 0;
>> }
>> +#define PHY_ADR 1
>
> You should be able to read this PHY address from the device-tree now.
> No need to define this here again.
>
> Thanks,
> Stefan
>
>> +
>> #ifdef CONFIG_RESET_PHY_R
>> void reset_phy(void)
>> {
>> u16 reg;
>> - u16 phyaddr;
>> - char *name = "egiga0";
>> + u16 phyaddr = PHY_ADR;
>> + char *name = "ethernet-controller@72000";
>> if (miiphy_set_current_dev(name))
>> return;
>> - /* read PHY dev address */
>> - if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
>> - printf("could not read PHY dev address\n");
>> - return;
>> - }
>> -
>> /* set RGMII delay */
>> miiphy_write(name, phyaddr, MV88E1318_PGADR_REG,
>> MV88E1318_MAC_CTRL_PG);
>> miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, ®);
>> @@ -131,5 +128,7 @@ void reset_phy(void)
>> /* downshift */
>> miiphy_write(name, phyaddr, 0x10, 0x3860);
>> miiphy_write(name, phyaddr, 0x0, 0x9140);
>> +
>> + printf("MV88E1318 PHY initialized on %s\n", name);
>> }
>> #endif /* CONFIG_RESET_PHY_R */
>>
>
>
> Viele Grüße,
> Stefan
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree
2021-07-01 8:22 ` Stefan Roese
@ 2021-07-01 10:56 ` Tony (bodhi)
0 siblings, 0 replies; 12+ messages in thread
From: Tony (bodhi) @ 2021-07-01 10:56 UTC (permalink / raw)
To: Stefan Roese; +Cc: U-Boot Mailing List, Tom Rini, Chris Packham
Hi Stefan,
On Thu, Jul 1, 2021 at 1:22 AM Stefan Roese <sr@denx.de> wrote:
>
> Hi Tony,
>
> On 01.07.21 10:19, Stefan Roese wrote:
> > On 01.07.21 06:26, Tony Dinh wrote:
> >> In DM Ethernet, the old "egiga0" name is no longer valid, so replace it
> >> with Ethernet PHY name from device tree.
> >>
> >> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> >> ---
> >>
> >> board/zyxel/nsa310s/nsa310s.c | 15 +++++++--------
> >> 1 file changed, 7 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/board/zyxel/nsa310s/nsa310s.c
> >> b/board/zyxel/nsa310s/nsa310s.c
> >> index cd4a7723b1..29aded1910 100644
> >> --- a/board/zyxel/nsa310s/nsa310s.c
> >> +++ b/board/zyxel/nsa310s/nsa310s.c
> >> @@ -1,5 +1,6 @@
> >> // SPDX-License-Identifier: GPL-2.0+
> >> /*
> >> + * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
> >
> > AFAIU, just changing a few lines, as this patch does, does not justify
> > to add a copyright notice to this file.
>
> I just noticed that you already are present in the copyright notice
> below. I suggest to change this in a way, so that your name only
> occurs once, like:
>
> * Copyright (C) 2015, 2021 Tony Dinh <mibodhi@gmail.com>
>
> Does this make sense?
Definitely! I will correct the copyright for this patch and also the
copyright in patch 4/4 using this convention.
>
> Thanks,
> Stefan
>
> >> * Copyright (C) 2015
> >> * Gerald Kerma <dreagle@doukki.net>
> >> * Tony Dinh <mibodhi@gmail.com>
> >> @@ -81,22 +82,18 @@ int board_init(void)
> >> return 0;
> >> }
> >> +#define PHY_ADR 1
> >
> > You should be able to read this PHY address from the device-tree now.
> > No need to define this here again.
I don't know yet how to extract this info from the device tree nodes (I am
familiar with this in Linux kernel, but at first glance it seems like
u-boot fdt library is different).
So if it is OK, perhaps I could send in another patch for this correction
after this DM conversion is done.
Thanks,
Tony
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 4/4] NSA310S : Add DM SATA configs
2021-07-01 4:26 [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Tony Dinh
` (2 preceding siblings ...)
2021-07-01 4:26 ` [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree Tony Dinh
@ 2021-07-01 4:26 ` Tony Dinh
2021-07-01 8:20 ` Stefan Roese
2021-07-19 12:32 ` [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Stefan Roese
4 siblings, 1 reply; 12+ messages in thread
From: Tony Dinh @ 2021-07-01 4:26 UTC (permalink / raw)
To: Stefan Roese, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham, Tony Dinh
Enable DM SATA, removed IDE driver, and add SATA MV driver.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
---
include/configs/nsa310s.h | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
index e38c65a485..94f293de90 100644
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@@ -1,5 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
+ * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
* Copyright (C) 2015
* Gerald Kerma <dreagle@doukki.net>
* Tony Dinh <mibodhi@gmail.com>
@@ -46,10 +47,10 @@
#endif /* CONFIG_CMD_NET */
/* SATA driver configuration */
-#ifdef CONFIG_IDE
-#define __io
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#endif /* CONFIG_IDE */
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_LBA48
+#endif /* CONFIG_SATA */
/* RTC driver configuration */
#ifdef CONFIG_CMD_DATE
--
2.20.1
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH 4/4] NSA310S : Add DM SATA configs
2021-07-01 4:26 ` [PATCH 4/4] NSA310S : Add DM SATA configs Tony Dinh
@ 2021-07-01 8:20 ` Stefan Roese
0 siblings, 0 replies; 12+ messages in thread
From: Stefan Roese @ 2021-07-01 8:20 UTC (permalink / raw)
To: Tony Dinh, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham
On 01.07.21 06:26, Tony Dinh wrote:
> Enable DM SATA, removed IDE driver, and add SATA MV driver.
>
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
> ---
>
> include/configs/nsa310s.h | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
> index e38c65a485..94f293de90 100644
> --- a/include/configs/nsa310s.h
> +++ b/include/configs/nsa310s.h
> @@ -1,5 +1,6 @@
> /* SPDX-License-Identifier: GPL-2.0+ */
> /*
> + * Copyright (C) 2021 Tony Dinh <mibodhi@gmail.com>
> * Copyright (C) 2015
> * Gerald Kerma <dreagle@doukki.net>
> * Tony Dinh <mibodhi@gmail.com>
Please change this copyright line instead of adding yourself a 2nd
time.
Other than this:
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> @@ -46,10 +47,10 @@
> #endif /* CONFIG_CMD_NET */
>
> /* SATA driver configuration */
> -#ifdef CONFIG_IDE
> -#define __io
> -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
> -#endif /* CONFIG_IDE */
> +#ifdef CONFIG_SATA
> +#define CONFIG_SYS_SATA_MAX_DEVICE 1
> +#define CONFIG_LBA48
> +#endif /* CONFIG_SATA */
>
> /* RTC driver configuration */
> #ifdef CONFIG_CMD_DATE
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model.
2021-07-01 4:26 [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Tony Dinh
` (3 preceding siblings ...)
2021-07-01 4:26 ` [PATCH 4/4] NSA310S : Add DM SATA configs Tony Dinh
@ 2021-07-19 12:32 ` Stefan Roese
4 siblings, 0 replies; 12+ messages in thread
From: Stefan Roese @ 2021-07-19 12:32 UTC (permalink / raw)
To: Tony Dinh, U-Boot Mailing List; +Cc: Tom Rini, Chris Packham
On 01.07.21 06:26, Tony Dinh wrote:
>
> - Add device tree kirkwood-nsa310s.dts
> - Add DM_USB, DM_ETH, DM_SATA and associated configs to nsa310s_defconfig
> - Move some miscellaneous configs from board file to nsa310s_defconfig
> - Replace old device name "egiga0" with Ethernet PHY name
> from device tree kirkwood.dtsi
> - Removed IDE, and add SATA configs in board file nsa310s.c
>
>
> Tony Dinh (4):
> NSA310S : Add device tree DTS for Zyxel NSA310S board
> NSA310S : Add DM USB, DM Ethernet, and DM SATA configs
> NSA310S : Use Ethernet PHY name from device tree
> NSA310S : Add DM SATA configs
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
> board/zyxel/nsa310s/nsa310s.c | 15 +-
> configs/nsa310s_defconfig | 12 +-
> include/configs/nsa310s.h | 9 +-
> 5 files changed, 342 insertions(+), 13 deletions(-)
> create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts
>
Applied to u-boot-marvell/master
Thanks,
Stefan
^ permalink raw reply [flat|nested] 12+ messages in thread