From: Jagan Teki <jagan@amarulasolutions.com>
To: Kever Yang <kever.yang@rock-chips.com>,
Simon Glass <sjg@chromium.org>,
Philipp Tomsich <philipp.tomsich@vrull.eu>
Cc: Jonas Karlman <jonas@kwiboo.se>,
u-boot@lists.denx.de, linux-amarula@amarulasolutions.com,
Jagan Teki <jagan@amarulasolutions.com>,
Tianling Shen <cnsztl@gmail.com>,
David Bauer <mail@david-bauer.net>,
Loic Devulder <ldevulder@suse.com>, Chen-Yu Tsai <wens@csie.org>,
Banglang Huang <banglang.huang@foxmail.com>,
"Matwey V . Kornilov" <matwey.kornilov@gmail.com>
Subject: [PATCH v2 2/7] configs: Drop unused XHCI_DWC3 for RK3328 boards
Date: Tue, 6 Jun 2023 22:39:13 +0530 [thread overview]
Message-ID: <20230606170918.45581-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20230606170918.45581-1-jagan@amarulasolutions.com>
Driver support for rk3328 is not supported so drop this
unused XHCI_DWC3.
Cc: Tianling Shen <cnsztl@gmail.com>
Cc: David Bauer <mail@david-bauer.net>
Cc: Loic Devulder <ldevulder@suse.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Banglang Huang <banglang.huang@foxmail.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none
configs/evb-rk3328_defconfig | 1 -
configs/nanopi-r2c-rk3328_defconfig | 1 -
configs/nanopi-r2s-rk3328_defconfig | 1 -
configs/roc-cc-rk3328_defconfig | 1 -
configs/rock-pi-e-rk3328_defconfig | 1 -
configs/rock64-rk3328_defconfig | 1 -
6 files changed, 6 deletions(-)
diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig
index 580ee502dc..5ab7abff9e 100644
--- a/configs/evb-rk3328_defconfig
+++ b/configs/evb-rk3328_defconfig
@@ -93,7 +93,6 @@ CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/nanopi-r2c-rk3328_defconfig b/configs/nanopi-r2c-rk3328_defconfig
index 84710c185b..6af874ca2c 100644
--- a/configs/nanopi-r2c-rk3328_defconfig
+++ b/configs/nanopi-r2c-rk3328_defconfig
@@ -97,7 +97,6 @@ CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
index 21d7a073e2..7b0fadbce9 100644
--- a/configs/nanopi-r2s-rk3328_defconfig
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -97,7 +97,6 @@ CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
index 6b3bc75ae9..477179e80e 100644
--- a/configs/roc-cc-rk3328_defconfig
+++ b/configs/roc-cc-rk3328_defconfig
@@ -102,7 +102,6 @@ CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/rock-pi-e-rk3328_defconfig b/configs/rock-pi-e-rk3328_defconfig
index 9c67d0c5fe..633d5417a9 100644
--- a/configs/rock-pi-e-rk3328_defconfig
+++ b/configs/rock-pi-e-rk3328_defconfig
@@ -103,7 +103,6 @@ CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
diff --git a/configs/rock64-rk3328_defconfig b/configs/rock64-rk3328_defconfig
index 74a9cc0a7d..ae761d08a1 100644
--- a/configs/rock64-rk3328_defconfig
+++ b/configs/rock64-rk3328_defconfig
@@ -100,7 +100,6 @@ CONFIG_SYSRESET=y
# CONFIG_TPL_SYSRESET is not set
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
--
2.25.1
next prev parent reply other threads:[~2023-06-06 17:10 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-06 17:09 [PATCH v2 0/7] rockchip: Fix RK3328 USB support Jagan Teki
2023-06-06 17:09 ` [PATCH v2 1/7] arm64: dts: rockchip: Drop unused rk3328-xhci node Jagan Teki
2023-07-26 10:59 ` Kever Yang
2023-06-06 17:09 ` Jagan Teki [this message]
2023-07-26 11:00 ` [PATCH v2 2/7] configs: Drop unused XHCI_DWC3 for RK3328 boards Kever Yang
2023-06-06 17:09 ` [PATCH v2 3/7] usb: dwc3-generic: Restrict single ctrl node for RK3328 Jagan Teki
2023-06-11 14:53 ` Peter Robinson
2023-06-11 16:25 ` Jagan Teki
2023-07-26 11:00 ` Kever Yang
2023-06-06 17:09 ` [PATCH v2 4/7] configs: Enable DWC3 USB 3.0 on RK3328 boards Jagan Teki
2023-07-26 11:01 ` Kever Yang
2023-06-06 17:09 ` [PATCH v2 5/7] phy: rockchip-inno-usb2: Add USB2 PHY for RK3328 Jagan Teki
2023-06-07 9:12 ` Xavier Drudis Ferran
2023-07-26 11:01 ` Kever Yang
2023-06-06 17:09 ` [PATCH v2 6/7] clk: rockchip: rk3328: Handle usb480m phy clock Jagan Teki
2023-07-26 11:01 ` Kever Yang
2023-06-06 17:09 ` [PATCH v2 7/7] configs: rockchip: Enable USB2PHY for RK3328 boards Jagan Teki
2023-07-26 11:02 ` Kever Yang
2023-06-11 22:31 ` [PATCH v2 0/7] rockchip: Fix RK3328 USB support Peter Robinson
2023-07-13 9:31 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230606170918.45581-3-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=banglang.huang@foxmail.com \
--cc=cnsztl@gmail.com \
--cc=jonas@kwiboo.se \
--cc=kever.yang@rock-chips.com \
--cc=ldevulder@suse.com \
--cc=linux-amarula@amarulasolutions.com \
--cc=mail@david-bauer.net \
--cc=matwey.kornilov@gmail.com \
--cc=philipp.tomsich@vrull.eu \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox