From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH V3 08/14] ARM: dts: stm32: Add configuration EEPROM on AV96
Date: Wed, 1 Apr 2020 13:00:45 +0200 [thread overview]
Message-ID: <95dbf19a-43fc-7040-e7b7-90e54ff84852@denx.de> (raw)
In-Reply-To: <fd72c86cb4174cb08c2c7b313b058ccb@SFHDAG6NODE3.st.com>
On 4/1/20 12:02 PM, Patrick DELAUNAY wrote:
> Hi,
Hi,
>> From: Marek Vasut <marex@denx.de>
>> Sent: mardi 31 mars 2020 19:52
>>
>> The board has an EEPROM on the same I2C bus as PMIC, at address 0x53.
>> The EEPROM contains the board MAC address.
>>
>> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
>> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
>> Signed-off-by: Marek Vasut <marex@denx.de>
>> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>> Cc: Patrick Delaunay <patrick.delaunay@st.com>
>> Cc: Patrice Chotard <patrice.chotard@st.com>
>> ---
>
> Applied to u-boot-stm/master, with one minor modification
>
> I also add the alias eeprom0 = &eeprom0 (with eeprom0: eeprom at 53) to be compatible
> with previous patch "ARM: dts: stm32: Use DT alias for the configuration EEPROM"
Thanks, this was in 14/14, but got omitted here.
next prev parent reply other threads:[~2020-04-01 11:00 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-31 17:51 [PATCH V3 00/14] ARM: stm32: Fix Avenger96 Marek Vasut
2020-03-31 17:51 ` [PATCH V3 01/14] ARM: dts: stm32: Repair SD1 pre-reloc pinmux DT node on AV96 Marek Vasut
2020-04-01 9:54 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 02/14] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins Marek Vasut
2020-04-01 9:55 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 03/14] ARM: dts: stm32: Repair SDMMC1 operation on AV96 Marek Vasut
2020-04-01 9:55 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 04/14] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7 Marek Vasut
2020-04-01 9:56 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 05/14] ARM: dts: stm32: Repair SDMMC2 operation Marek Vasut
2020-04-01 9:56 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 06/14] ARM: dts: stm32: Add QSPI NOR on AV96 Marek Vasut
2020-04-01 8:17 ` Patrick DELAUNAY
2020-04-01 9:59 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 07/14] ARM: dts: stm32: Use DT alias for the configuration EEPROM Marek Vasut
2020-04-01 9:59 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 08/14] ARM: dts: stm32: Add configuration EEPROM on AV96 Marek Vasut
2020-04-01 10:02 ` Patrick DELAUNAY
2020-04-01 11:00 ` Marek Vasut [this message]
2020-03-31 17:51 ` [PATCH V3 09/14] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII Marek Vasut
2020-04-01 10:03 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 10/14] ARM: dts: stm32: Repair ethernet operation on AV96 Marek Vasut
2020-04-01 10:03 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 11/14] ARM: dts: stm32: Add missing ethernet PHY reset " Marek Vasut
2020-04-01 10:04 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 12/14] ARM: dts: stm32: Repair PMIC configuration " Marek Vasut
2020-04-01 7:34 ` Patrick DELAUNAY
2020-04-01 11:06 ` Marek Vasut
2020-04-01 12:45 ` Patrice CHOTARD
2020-04-01 12:53 ` Marek Vasut
2020-04-01 13:52 ` Patrick DELAUNAY
2020-04-01 13:53 ` Marek Vasut
2020-04-02 12:53 ` Pascal PAILLET-LME
2020-04-02 13:07 ` Marek Vasut
2020-04-02 13:43 ` Pascal PAILLET-LME
2020-04-09 11:28 ` Marek Vasut
2020-04-01 10:04 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 13/14] ARM: dts: stm32: Adjust PLL4 settings " Marek Vasut
2020-04-01 10:24 ` Patrick DELAUNAY
2020-04-01 11:09 ` Marek Vasut
2020-04-01 16:49 ` Gerald BAEZA
2020-04-01 17:45 ` Manivannan Sadhasivam
2020-04-01 18:48 ` Marek Vasut
2020-04-02 7:44 ` Gerald BAEZA
2020-04-02 13:04 ` Marek Vasut
2020-04-24 14:31 ` Patrick DELAUNAY
2020-03-31 17:51 ` [PATCH V3 14/14] ARM: dts: stm32: Split AV96 into DHCOR SoM and AV96 board Marek Vasut
2020-04-24 14:31 ` Patrick DELAUNAY
2020-04-27 10:29 ` Marek Vasut
2020-04-27 14:00 ` Patrick DELAUNAY
2020-04-27 14:34 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=95dbf19a-43fc-7040-e7b7-90e54ff84852@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox