All of lore.kernel.org
 help / color / mirror / Atom feed
From: greg@kroah.com (Greg KH)
To: linux-kernel@vger.kernel.org, sensors@stimpy.netroedge.com
Subject: [PATCH] i2c driver fixes for 2.6.0
Date: Thu, 19 May 2005 06:24:32 +0000	[thread overview]
Message-ID: <1072821975626@kroah.com> (raw)
In-Reply-To: <10728219742126@kroah.com>
In-Reply-To: <10728219692713@kroah.com>

ChangeSet 1.1496.9.6, 2003/12/04 13:53:39-08:00, khali@linux-fr.org

[PATCH] I2C: add Serverworks CSB6 support to i2c-piix4

This patch adds support for the Serverworks CSB6 to i2c-piix4 driver. It
was confirmed to work by lasirona at yahoo dot com in support ticket
#1424:
http://secure.netroedge.com/~lm78/readticket.cgi?ticket\x1424


 drivers/i2c/busses/Kconfig     |    3 ++-
 drivers/i2c/busses/i2c-piix4.c |    9 ++++++++-
 2 files changed, 10 insertions(+), 2 deletions(-)


diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig	Tue Dec 30 12:31:40 2003
+++ b/drivers/i2c/busses/Kconfig	Tue Dec 30 12:31:40 2003
@@ -161,11 +161,12 @@
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
-	  versions of the chipset is supported:
+	  versions of the chipset are supported:
 	    Intel PIIX4
 	    Intel 440MX
 	    Serverworks OSB4
 	    Serverworks CSB5
+	    Serverworks CSB6
 	    SMSC Victory66
 
 	  This driver can also be built as a module.  If so, the module
diff -Nru a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
--- a/drivers/i2c/busses/i2c-piix4.c	Tue Dec 30 12:31:40 2003
+++ b/drivers/i2c/busses/i2c-piix4.c	Tue Dec 30 12:31:40 2003
@@ -22,7 +22,7 @@
 /*
    Supports:
 	Intel PIIX4, 440MX
-	Serverworks OSB4, CSB5
+	Serverworks OSB4, CSB5, CSB6
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -418,6 +418,13 @@
 	{
 		.vendor =	PCI_VENDOR_ID_SERVERWORKS,
 		.device =	PCI_DEVICE_ID_SERVERWORKS_CSB5,
+		.subvendor =	PCI_ANY_ID,
+		.subdevice =	PCI_ANY_ID,
+		.driver_data =	0,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_SERVERWORKS,
+		.device =	PCI_DEVICE_ID_SERVERWORKS_CSB6,
 		.subvendor =	PCI_ANY_ID,
 		.subdevice =	PCI_ANY_ID,
 		.driver_data =	0,


WARNING: multiple messages have this Message-ID (diff)
From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org, sensors@stimpy.netroedge.com
Subject: Re: [PATCH] i2c driver fixes for 2.6.0
Date: Tue, 30 Dec 2003 14:06:15 -0800	[thread overview]
Message-ID: <1072821975626@kroah.com> (raw)
In-Reply-To: <10728219742126@kroah.com>

ChangeSet 1.1496.9.6, 2003/12/04 13:53:39-08:00, khali@linux-fr.org

[PATCH] I2C: add Serverworks CSB6 support to i2c-piix4

This patch adds support for the Serverworks CSB6 to i2c-piix4 driver. It
was confirmed to work by lasirona at yahoo dot com in support ticket
#1424:
http://secure.netroedge.com/~lm78/readticket.cgi?ticket=1424


 drivers/i2c/busses/Kconfig     |    3 ++-
 drivers/i2c/busses/i2c-piix4.c |    9 ++++++++-
 2 files changed, 10 insertions(+), 2 deletions(-)


diff -Nru a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig	Tue Dec 30 12:31:40 2003
+++ b/drivers/i2c/busses/Kconfig	Tue Dec 30 12:31:40 2003
@@ -161,11 +161,12 @@
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
-	  versions of the chipset is supported:
+	  versions of the chipset are supported:
 	    Intel PIIX4
 	    Intel 440MX
 	    Serverworks OSB4
 	    Serverworks CSB5
+	    Serverworks CSB6
 	    SMSC Victory66
 
 	  This driver can also be built as a module.  If so, the module
diff -Nru a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
--- a/drivers/i2c/busses/i2c-piix4.c	Tue Dec 30 12:31:40 2003
+++ b/drivers/i2c/busses/i2c-piix4.c	Tue Dec 30 12:31:40 2003
@@ -22,7 +22,7 @@
 /*
    Supports:
 	Intel PIIX4, 440MX
-	Serverworks OSB4, CSB5
+	Serverworks OSB4, CSB5, CSB6
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -418,6 +418,13 @@
 	{
 		.vendor =	PCI_VENDOR_ID_SERVERWORKS,
 		.device =	PCI_DEVICE_ID_SERVERWORKS_CSB5,
+		.subvendor =	PCI_ANY_ID,
+		.subdevice =	PCI_ANY_ID,
+		.driver_data =	0,
+	},
+	{
+		.vendor =	PCI_VENDOR_ID_SERVERWORKS,
+		.device =	PCI_DEVICE_ID_SERVERWORKS_CSB6,
 		.subvendor =	PCI_ANY_ID,
 		.subdevice =	PCI_ANY_ID,
 		.driver_data =	0,


  parent reply	other threads:[~2005-05-19  6:24 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-12-30 22:02 [BK PATCH] i2c driver fixes for 2.6.0 Greg KH
2005-05-19  6:24 ` Greg KH
2003-12-30 22:06 ` [PATCH] " Greg KH
2005-05-19  6:24   ` Greg KH
2003-12-30 22:06   ` Greg KH
2005-05-19  6:24     ` Greg KH
2003-12-30 22:06     ` Greg KH
2005-05-19  6:24       ` Greg KH
2003-12-30 22:06       ` Greg KH
2005-05-19  6:24         ` Greg KH
2003-12-30 22:06         ` Greg KH
2005-05-19  6:24           ` Greg KH
2003-12-30 22:06           ` Greg KH
2005-05-19  6:24             ` Greg KH
2003-12-30 22:06             ` Greg KH
2005-05-19  6:24               ` Greg KH
2003-12-30 22:06               ` Greg KH
2005-05-19  6:24                 ` Greg KH
2003-12-30 22:06                 ` Greg KH
2005-05-19  6:24                   ` Greg KH
2003-12-30 22:06                   ` Greg KH
2005-05-19  6:24                     ` Greg KH
2003-12-30 22:06                     ` Greg KH
2005-05-19  6:24                       ` Greg KH
2003-12-30 22:06                       ` Greg KH
2005-05-19  6:24                         ` Greg KH
2003-12-30 22:06                         ` Greg KH
2005-05-19  6:24                           ` Greg KH
2003-12-30 22:06                           ` Greg KH
2005-05-19  6:24                             ` Greg KH
2003-12-30 22:06                             ` Greg KH
2005-05-19  6:24                               ` Greg KH
2003-12-30 22:06                               ` Greg KH
2005-05-19  6:24                                 ` Greg KH
2003-12-30 22:06                                 ` Greg KH
2005-05-19  6:24                                   ` Greg KH
2003-12-30 22:06                                   ` Greg KH
2005-05-19  6:24                                     ` Greg KH
2003-12-30 22:06                                     ` Greg KH
2005-05-19  6:24                                       ` Greg KH
2003-12-30 22:06                                       ` Greg KH
2005-05-19  6:24                                         ` Greg KH
2003-12-30 22:06                                         ` Greg KH [this message]
2005-05-19  6:24                                           ` Greg KH
2003-12-30 22:06                                           ` Greg KH
2005-05-19  6:24                                             ` Greg KH
2003-12-30 22:06                                             ` Greg KH
2005-05-19  6:24                                               ` Greg KH
2005-05-19  6:24   ` Greg KH
2005-05-19  6:24   ` Tom Rini
2005-05-19  6:24   ` Rusty Russell
2005-05-19  6:24   ` Rusty Russell
2005-05-19  6:24   ` Jean Delvare
2005-05-19  6:24   ` Rusty Russell
2005-05-19  6:24   ` Jean Delvare
2005-05-19  6:24   ` Greg KH
2005-05-19  6:24   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1072821975626@kroah.com \
    --to=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sensors@stimpy.netroedge.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.