* [Bluez-users] F8T001 version 1 and SuSE 9.2
@ 2005-01-30 20:35 Mathis
2005-01-30 20:49 ` Marcel Holtmann
0 siblings, 1 reply; 5+ messages in thread
From: Mathis @ 2005-01-30 20:35 UTC (permalink / raw)
To: bluez-users
Hello,
I have SuSE Linux 9.2 installed with all updates, installed all bluez packages,
rebooted, plugged in my Belkin F8T001 USB Bluetooth dongle, KDE told me that it
found a new device, set it up -- enabling bluetooth daemon, configuring things
(left everything on default), pressed OK -- the daemon started, but nothing else
happened, I am unable to do anything...
"hcitool dev" shows:
Devices:
nothing else...
"lsusb" shows the device as being recognized by the USB subsystem, but seems
that the bluetooth subsystem is not interested in that device.
dmesg shows following (only bluetooth part):
Bluetooth: Core ver 2.6
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.4
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.0
Bluetooth: RFCOMM ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
usb 2-1: new full speed USB device using address 2
Bluetooth: HCI USB driver ver 2.7
usbcore: registered new driver hci_usb
Any hints?
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] F8T001 version 1 and SuSE 9.2
2005-01-30 20:35 [Bluez-users] F8T001 version 1 and SuSE 9.2 Mathis
@ 2005-01-30 20:49 ` Marcel Holtmann
2005-01-30 21:32 ` [Bluez-users] " Mathis
0 siblings, 1 reply; 5+ messages in thread
From: Marcel Holtmann @ 2005-01-30 20:49 UTC (permalink / raw)
To: BlueZ Mailing List
Hi,
> I have SuSE Linux 9.2 installed with all updates, installed all bluez packages,
> rebooted, plugged in my Belkin F8T001 USB Bluetooth dongle, KDE told me that it
> found a new device, set it up -- enabling bluetooth daemon, configuring things
> (left everything on default), pressed OK -- the daemon started, but nothing else
> happened, I am unable to do anything...
>
> "hcitool dev" shows:
> Devices:
> nothing else...
>
> "lsusb" shows the device as being recognized by the USB subsystem, but seems
> that the bluetooth subsystem is not interested in that device.
>
> dmesg shows following (only bluetooth part):
> Bluetooth: Core ver 2.6
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP ver 2.4
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: HIDP (Human Interface Emulation) ver 1.0
> Bluetooth: RFCOMM ver 1.3
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM TTY layer initialized
> usb 2-1: new full speed USB device using address 2
> Bluetooth: HCI USB driver ver 2.7
> usbcore: registered new driver hci_usb
what is the content of /proc/bus/usb/devices? Does "hciconfig -a" shows
you anything?
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Bluez-users] Re: F8T001 version 1 and SuSE 9.2
2005-01-30 20:49 ` Marcel Holtmann
@ 2005-01-30 21:32 ` Mathis
2005-01-30 21:45 ` Marcel Holtmann
0 siblings, 1 reply; 5+ messages in thread
From: Mathis @ 2005-01-30 21:32 UTC (permalink / raw)
To: bluez-users
> what is the content of /proc/bus/usb/devices? Does "hciconfig -a" shows
> you anything?
>
> Regards
>
> Marcel
>
/proc/bus/usb/devices shows following:
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-24.11-smp ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-24.11-smp uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-24.11-smp uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-24.11-smp uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=2033 Rev= 0.a0
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8-24.11-smp uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
"hciconfig -a" shows nothing...
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-users] Re: F8T001 version 1 and SuSE 9.2
2005-01-30 21:32 ` [Bluez-users] " Mathis
@ 2005-01-30 21:45 ` Marcel Holtmann
2005-01-30 22:42 ` Mathis
0 siblings, 1 reply; 5+ messages in thread
From: Marcel Holtmann @ 2005-01-30 21:45 UTC (permalink / raw)
To: BlueZ Mailing List
Hi,
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0a5c ProdID=2033 Rev= 0.a0
> C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
> E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
this is the Broadcom 2033 dongle that needs a firmware download before
it will work as H:2 dongle. You must install the bluez-firmware package
and make sure that the bcm203x kernel driver is loaded. You can also
call dmesg and check for an error message, because there must be one if
the firmware isn't found.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Bluez-users] Re: F8T001 version 1 and SuSE 9.2
2005-01-30 21:45 ` Marcel Holtmann
@ 2005-01-30 22:42 ` Mathis
0 siblings, 0 replies; 5+ messages in thread
From: Mathis @ 2005-01-30 22:42 UTC (permalink / raw)
To: bluez-users
Marcel Holtmann schrieb:
> Hi,
>
>
>>T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
>>D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>>P: Vendor=0a5c ProdID=2033 Rev= 0.a0
>>C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
>>I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>>E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>>E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>>I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>>I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
>>I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms
>>I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none)
>>E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms
>>I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
>>E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms
>>E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms
>
>
> this is the Broadcom 2033 dongle that needs a firmware download before
> it will work as H:2 dongle. You must install the bluez-firmware package
> and make sure that the bcm203x kernel driver is loaded. You can also
> call dmesg and check for an error message, because there must be one if
> the firmware isn't found.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
> Tool for open source databases. Create drag-&-drop reports. Save time
> by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
> Download a FREE copy at http://www.intelliview.com/go/osdn_nl
thanx, this information did help alot
Mathis
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-01-30 22:42 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-01-30 20:35 [Bluez-users] F8T001 version 1 and SuSE 9.2 Mathis
2005-01-30 20:49 ` Marcel Holtmann
2005-01-30 21:32 ` [Bluez-users] " Mathis
2005-01-30 21:45 ` Marcel Holtmann
2005-01-30 22:42 ` Mathis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.