From: Rolf Eike Beer <eike-kernel@sf-tec.de>
To: netdev@vger.kernel.org
Subject: [PATCH 4/x] sunhme: switch to devres
Date: Mon, 14 Feb 2022 19:31:09 +0100 [thread overview]
Message-ID: <11922663.O9o76ZdvQC@eto.sf-tec.de> (raw)
In-Reply-To: <4686583.GXAFRqVoOG@eto.sf-tec.de>
This not only removes a lot of code, it also fixes the memleak of the DMA
memory when register_netdev() fails.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
---
drivers/net/ethernet/sun/sunhme.c | 55 +++++++++----------------------
1 file changed, 16 insertions(+), 39 deletions(-)
diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c
index 980a936ce8d1..ec78f43f75c9 100644
--- a/drivers/net/ethernet/sun/sunhme.c
+++ b/drivers/net/ethernet/sun/sunhme.c
@@ -2952,7 +2952,6 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
struct happy_meal *hp;
struct net_device *dev;
void __iomem *hpreg_base;
- unsigned long hpreg_res;
int i, qfe_slot = -1;
char prom_name[64];
u8 addr[ETH_ALEN];
@@ -2969,7 +2968,7 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
strcpy(prom_name, "SUNW,hme");
#endif
- err = pci_enable_device(pdev);
+ err = pcim_enable_device(pdev);
if (err)
goto err_out;
@@ -2987,10 +2986,11 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
goto err_out;
}
- dev = alloc_etherdev(sizeof(struct happy_meal));
- err = -ENOMEM;
- if (!dev)
+ dev = devm_alloc_etherdev(&pdev->dev, sizeof(struct happy_meal));
+ if (!dev) {
+ err = -ENOMEM;
goto err_out;
+ }
SET_NETDEV_DEV(dev, &pdev->dev);
if (hme_version_printed++ == 0)
@@ -3009,21 +3009,23 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
qp->happy_meals[qfe_slot] = dev;
}
- hpreg_res = pci_resource_start(pdev, 0);
- err = -ENODEV;
if ((pci_resource_flags(pdev, 0) & IORESOURCE_IO) != 0) {
printk(KERN_ERR "happymeal(PCI): Cannot find proper PCI device base address.\n");
goto err_out_clear_quattro;
}
- if (pci_request_regions(pdev, DRV_NAME)) {
+
+ if (!devm_request_region(&pdev->dev, pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0),
+ DRV_NAME)) {
printk(KERN_ERR "happymeal(PCI): Cannot obtain PCI resources, "
"aborting.\n");
goto err_out_clear_quattro;
}
- if ((hpreg_base = ioremap(hpreg_res, 0x8000)) == NULL) {
+ hpreg_base = pcim_iomap(pdev, 0, 0x8000);
+ if (!hpreg_base) {
printk(KERN_ERR "happymeal(PCI): Unable to remap card memory.\n");
- goto err_out_free_res;
+ goto err_out_clear_quattro;
}
for (i = 0; i < 6; i++) {
@@ -3089,11 +3091,10 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
hp->happy_bursts = DMA_BURSTBITS;
#endif
- hp->happy_block = dma_alloc_coherent(&pdev->dev, PAGE_SIZE,
+ hp->happy_block = dmam_alloc_coherent(&pdev->dev, PAGE_SIZE,
&hp->hblock_dvma, GFP_KERNEL);
- err = -ENODEV;
if (!hp->happy_block)
- goto err_out_iounmap;
+ goto err_out_clear_quattro;
hp->linkcheck = 0;
hp->timer_state = asleep;
@@ -3127,11 +3128,11 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
happy_meal_set_initial_advertisement(hp);
spin_unlock_irq(&hp->happy_lock);
- err = register_netdev(hp->dev);
+ err = devm_register_netdev(&pdev->dev, dev);
if (err) {
printk(KERN_ERR "happymeal(PCI): Cannot register net device, "
"aborting.\n");
- goto err_out_iounmap;
+ goto err_out_clear_quattro;
}
pci_set_drvdata(pdev, hp);
@@ -3164,37 +3165,14 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,
return 0;
-err_out_iounmap:
- iounmap(hp->gregs);
-
-err_out_free_res:
- pci_release_regions(pdev);
-
err_out_clear_quattro:
if (qp != NULL)
qp->happy_meals[qfe_slot] = NULL;
- free_netdev(dev);
-
err_out:
return err;
}
-static void happy_meal_pci_remove(struct pci_dev *pdev)
-{
- struct happy_meal *hp = pci_get_drvdata(pdev);
- struct net_device *net_dev = hp->dev;
-
- unregister_netdev(net_dev);
-
- dma_free_coherent(hp->dma_dev, PAGE_SIZE,
- hp->happy_block, hp->hblock_dvma);
- iounmap(hp->gregs);
- pci_release_regions(hp->happy_dev);
-
- free_netdev(net_dev);
-}
-
static const struct pci_device_id happymeal_pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_HAPPYMEAL) },
{ } /* Terminating entry */
@@ -3206,7 +3184,6 @@ static struct pci_driver hme_pci_driver = {
.name = "hme",
.id_table = happymeal_pci_ids,
.probe = happy_meal_pci_probe,
- .remove = happy_meal_pci_remove,
};
static int __init happy_meal_pci_init(void)
--
2.34.1
next prev parent reply other threads:[~2022-02-14 18:31 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-03 16:20 sunhme: some cleanups Rolf Eike Beer
2022-02-03 16:21 ` [PATCH 1/3] sunhme: remove unused tx_dump_ring() Rolf Eike Beer
2022-07-27 3:42 ` Sean Anderson
2022-02-03 16:22 ` [PATCH 2/3] sunhme: fix the version number in struct ethtool_drvinfo Rolf Eike Beer
2022-02-03 17:12 ` Andrew Lunn
2022-02-05 11:27 ` Rolf Eike Beer
2022-02-05 14:48 ` Andrew Lunn
2022-02-05 15:57 ` Rolf Eike Beer
2022-02-05 16:32 ` Andrew Lunn
2022-02-03 21:53 ` Jakub Kicinski
2022-02-14 18:33 ` [PATCH 2/3 v2] " Rolf Eike Beer
2022-02-03 16:23 ` [PATCH 3/3] sunhme: forward the error code from pci_enable_device() Rolf Eike Beer
2022-07-27 3:48 ` Sean Anderson
2022-02-14 18:31 ` Rolf Eike Beer [this message]
2022-07-27 3:49 ` [PATCH 4/x] sunhme: switch to devres Sean Anderson
2022-07-27 3:58 ` Sean Anderson
2022-07-28 19:52 ` Rolf Eike Beer
2022-07-29 0:33 ` Sean Anderson
2022-08-01 15:14 ` Rolf Eike Beer
2022-08-24 15:45 ` Rolf Eike Beer
2022-08-24 15:57 ` Sean Anderson
2022-08-29 13:22 ` [PATCH 4/4 v2] " Rolf Eike Beer
2022-08-30 0:16 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11922663.O9o76ZdvQC@eto.sf-tec.de \
--to=eike-kernel@sf-tec.de \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.