* [PATCH 04/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide)
2009-10-24 19:42 [RFC] more PCMCIA cleanup patches for 2.6.33 Dominik Brodowski
@ 2009-10-24 19:42 ` Dominik Brodowski
2009-10-26 15:47 ` Sergei Shtylyov
2009-10-24 19:42 ` [PATCH 08/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (net) Dominik Brodowski
` (6 subsequent siblings)
7 siblings, 1 reply; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:42 UTC (permalink / raw)
To: linux-pcmcia; +Cc: Dominik Brodowski, linux-ide
ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG,
so convert it to use the dynamic debug infrastructure.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/ata/pata_pcmcia.c | 16 ++++++++--------
drivers/ide/ide-cs.c | 32 +++++++++++---------------------
2 files changed, 19 insertions(+), 29 deletions(-)
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index dc99e26..5f94e21 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -177,9 +177,6 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
.drain_fifo = pcmcia_8bit_drain_fifo,
};
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
struct pcmcia_config_check {
unsigned long ctl_base;
@@ -252,7 +249,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
struct ata_port *ap;
struct ata_pcmcia_info *info;
struct pcmcia_config_check *stk = NULL;
- int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
+ int is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
int n_ports = 1;
@@ -296,8 +293,13 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
}
io_base = pdev->io.BasePort1;
ctl_base = stk->ctl_base;
- CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
+ ret = pcmcia_request_irq(pdev, &pdev->irq);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_configuration(pdev, &pdev->conf);
+ if (ret)
+ goto failed;
/* iomap */
ret = -ENOMEM;
@@ -351,8 +353,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
kfree(stk);
return 0;
-cs_failed:
- cs_error(pdev, last_fn, last_ret);
failed:
kfree(stk);
info->ndev = 0;
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 063b933..6cee6c8 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -60,15 +60,6 @@ MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
MODULE_LICENSE("Dual MPL/GPL");
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-#ifdef CONFIG_PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
-
/*====================================================================*/
typedef struct ide_info_t {
@@ -98,7 +89,7 @@ static int ide_probe(struct pcmcia_device *link)
{
ide_info_t *info;
- DEBUG(0, "ide_attach()\n");
+ dev_dbg(&link->dev, "ide_attach()\n");
/* Create new ide device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -134,7 +125,7 @@ static void ide_detach(struct pcmcia_device *link)
ide_hwif_t *hwif = info->host->ports[0];
unsigned long data_addr, ctl_addr;
- DEBUG(0, "ide_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
data_addr = hwif->io_ports.data_addr;
ctl_addr = hwif->io_ports.ctl_addr;
@@ -217,9 +208,6 @@ out_release:
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
struct pcmcia_config_check {
unsigned long ctl_base;
int skip_vcc;
@@ -282,11 +270,11 @@ static int ide_config(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
struct pcmcia_config_check *stk = NULL;
- int last_ret = 0, last_fn = 0, is_kme = 0;
+ int ret = 0, is_kme = 0;
unsigned long io_base, ctl_base;
struct ide_host *host;
- DEBUG(0, "ide_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "ide_config(0x%p)\n", link);
is_kme = ((link->manf_id == MANFID_KME) &&
((link->card_id == PRODID_KME_KXLC005_A) ||
@@ -306,8 +294,12 @@ static int ide_config(struct pcmcia_device *link)
io_base = link->io.BasePort1;
ctl_base = stk->ctl_base;
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* disable drive interrupts during IDE probe */
outb(0x02, ctl_base);
@@ -342,8 +334,6 @@ err_mem:
printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
goto failed;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
kfree(stk);
ide_release(link);
@@ -363,7 +353,7 @@ static void ide_release(struct pcmcia_device *link)
ide_info_t *info = link->priv;
struct ide_host *host = info->host;
- DEBUG(0, "ide_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
if (info->ndev)
/* FIXME: if this fails we need to queue the cleanup somehow
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH 04/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide)
2009-10-24 19:42 ` [PATCH 04/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) Dominik Brodowski
@ 2009-10-26 15:47 ` Sergei Shtylyov
2009-10-26 15:33 ` Dominik Brodowski
0 siblings, 1 reply; 31+ messages in thread
From: Sergei Shtylyov @ 2009-10-26 15:47 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: linux-pcmcia, linux-ide
Hello.
Dominik Brodowski wrote:
> ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG,
> so convert it to use the dynamic debug infrastructure.
> Also, remove all usages of the CS_CHECK macro and replace them with proper
> Linux style calling and return value checking. The extra error reporting may
> be dropped, as the PCMCIA core already complains about any (non-driver-author)
> errors.
> CC: linux-ide@vger.kernel.org
> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
> ---
> drivers/ata/pata_pcmcia.c | 16 ++++++++--------
> drivers/ide/ide-cs.c | 32 +++++++++++---------------------
> 2 files changed, 19 insertions(+), 29 deletions(-)
Please submit as two separate patches as ide and libata are two separate
subsystems.
WBR, Sergei
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH 04/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide)
2009-10-26 15:47 ` Sergei Shtylyov
@ 2009-10-26 15:33 ` Dominik Brodowski
0 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-26 15:33 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: linux-pcmcia, linux-ide
Sergei,
On Mon, Oct 26, 2009 at 06:47:49PM +0300, Sergei Shtylyov wrote:
> Dominik Brodowski wrote:
>
>> ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG,
>> so convert it to use the dynamic debug infrastructure.
>
>> Also, remove all usages of the CS_CHECK macro and replace them with proper
>> Linux style calling and return value checking. The extra error reporting may
>> be dropped, as the PCMCIA core already complains about any (non-driver-author)
>> errors.
>
>> CC: linux-ide@vger.kernel.org
>> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
>> ---
>> drivers/ata/pata_pcmcia.c | 16 ++++++++--------
>> drivers/ide/ide-cs.c | 32 +++++++++++---------------------
>> 2 files changed, 19 insertions(+), 29 deletions(-)
>
> Please submit as two separate patches as ide and libata are two
> separate subsystems.
thanks for your comment. And I see your point -- but as I intend to push this
upstream using the linux-pcmcia tree, as the IDE and ATA subsystems use the
same (linux-ide) mailing list, and as both drivers are quire related, I
thought handling both drivers in one patch is acceptable. If it still needs
to be done otherwise, I'll re-submit this patch in two parts and udpate my
workflow accordingly.
Best,
Dominik
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH 08/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (net)
2009-10-24 19:42 [RFC] more PCMCIA cleanup patches for 2.6.33 Dominik Brodowski
2009-10-24 19:42 ` [PATCH 04/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) Dominik Brodowski
@ 2009-10-24 19:42 ` Dominik Brodowski
2009-10-24 19:42 ` Dominik Brodowski
` (5 subsequent siblings)
7 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:42 UTC (permalink / raw)
To: linux-pcmcia; +Cc: Dominik Brodowski, netdev
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG. Only some rare debug checks are
now hidden behind "#ifdef DEBUG" or "#if 0".
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/net/pcmcia/3c574_cs.c | 66 ++++++++----------
drivers/net/pcmcia/3c589_cs.c | 75 +++++++-------------
drivers/net/pcmcia/axnet_cs.c | 53 +++++---------
drivers/net/pcmcia/com20020_cs.c | 55 ++++++--------
drivers/net/pcmcia/fmvj18x_cs.c | 109 ++++++++++------------------
drivers/net/pcmcia/ibmtr_cs.c | 54 +++++++-------
drivers/net/pcmcia/nmclan_cs.c | 148 +++++++++++++++----------------------
drivers/net/pcmcia/pcnet_cs.c | 67 +++++++-----------
drivers/net/pcmcia/smc91c92_cs.c | 85 ++++++++--------------
drivers/net/pcmcia/xirc2ps_cs.c | 111 +++++++++++------------------
10 files changed, 315 insertions(+), 508 deletions(-)
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 6449290..dbef5d9 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -118,14 +118,6 @@ INT_MODULE_PARM(full_duplex, 0);
/* Autodetect link polarity reversal? */
INT_MODULE_PARM(auto_polarity, 1);
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"3c574_cs.c 1.65ac1 2003/04/07 Donald Becker/David Hinds, becker@scyld.com.\n";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -278,7 +270,7 @@ static int tc574_probe(struct pcmcia_device *link)
struct el3_private *lp;
struct net_device *dev;
- DEBUG(0, "3c574_attach()\n");
+ dev_dbg(&link->dev, "3c574_attach()\n");
/* Create the PC card device object. */
dev = alloc_etherdev(sizeof(struct el3_private));
@@ -319,7 +311,7 @@ static void tc574_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "3c574_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "3c574_detach()\n");
if (link->dev_node)
unregister_netdev(dev);
@@ -335,16 +327,13 @@ static void tc574_detach(struct pcmcia_device *link)
ethernet device available to the system.
*/
-#define CS_CHECK(fn, ret) \
- do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
static int tc574_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
struct el3_private *lp = netdev_priv(dev);
- int last_fn, last_ret, i, j;
+ int ret, i, j;
unsigned int ioaddr;
__be16 *phys_addr;
char *cardname;
@@ -354,7 +343,7 @@ static int tc574_config(struct pcmcia_device *link)
phys_addr = (__be16 *)dev->dev_addr;
- DEBUG(0, "3c574_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "3c574_config()\n");
link->io.IOAddrLines = 16;
for (i = j = 0; j < 0x400; j += 0x20) {
@@ -363,12 +352,16 @@ static int tc574_config(struct pcmcia_device *link)
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -433,7 +426,8 @@ static int tc574_config(struct pcmcia_device *link)
mii_status = mdio_read(ioaddr, phy & 0x1f, 1);
if (mii_status != 0xffff) {
lp->phys = phy & 0x1f;
- DEBUG(0, " MII transceiver at index %d, status %x.\n",
+ dev_dbg(&link->dev, " MII transceiver at "
+ "index %d, status %x.\n",
phy, mii_status);
if ((mii_status & 0x0040) == 0)
mii_preamble_required = 1;
@@ -476,8 +470,6 @@ static int tc574_config(struct pcmcia_device *link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
tc574_release(link);
return -ENODEV;
@@ -736,7 +728,7 @@ static int el3_open(struct net_device *dev)
lp->media.expires = jiffies + HZ;
add_timer(&lp->media);
- DEBUG(2, "%s: opened, status %4.4x.\n",
+ dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
dev->name, inw(dev->base_addr + EL3_STATUS));
return 0;
@@ -770,7 +762,7 @@ static void pop_tx_status(struct net_device *dev)
if (tx_status & 0x30)
tc574_wait_for_completion(dev, TxReset);
if (tx_status & 0x38) {
- DEBUG(1, "%s: transmit error: status 0x%02x\n",
+ pr_debug("%s: transmit error: status 0x%02x\n",
dev->name, tx_status);
outw(TxEnable, ioaddr + EL3_CMD);
dev->stats.tx_aborted_errors++;
@@ -786,7 +778,7 @@ static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
struct el3_private *lp = netdev_priv(dev);
unsigned long flags;
- DEBUG(3, "%s: el3_start_xmit(length = %ld) called, "
+ pr_debug("%s: el3_start_xmit(length = %ld) called, "
"status %4.4x.\n", dev->name, (long)skb->len,
inw(ioaddr + EL3_STATUS));
@@ -825,7 +817,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
return IRQ_NONE;
ioaddr = dev->base_addr;
- DEBUG(3, "%s: interrupt, status %4.4x.\n",
+ pr_debug("%s: interrupt, status %4.4x.\n",
dev->name, inw(ioaddr + EL3_STATUS));
spin_lock(&lp->window_lock);
@@ -834,7 +826,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
(IntLatch | RxComplete | RxEarly | StatsFull)) {
if (!netif_device_present(dev) ||
((status & 0xe000) != 0x2000)) {
- DEBUG(1, "%s: Interrupt from dead card\n", dev->name);
+ pr_debug("%s: Interrupt from dead card\n", dev->name);
break;
}
@@ -844,7 +836,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
work_budget = el3_rx(dev, work_budget);
if (status & TxAvailable) {
- DEBUG(3, " TX room bit was handled.\n");
+ pr_debug(" TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue(dev);
@@ -884,7 +876,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
}
if (--work_budget < 0) {
- DEBUG(0, "%s: Too much work in interrupt, "
+ pr_debug("%s: Too much work in interrupt, "
"status %4.4x.\n", dev->name, status);
/* Clear all interrupts */
outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
@@ -894,7 +886,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
}
- DEBUG(3, "%s: exiting interrupt, status %4.4x.\n",
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
dev->name, inw(ioaddr + EL3_STATUS));
spin_unlock(&lp->window_lock);
@@ -1001,7 +993,7 @@ static void update_stats(struct net_device *dev)
unsigned int ioaddr = dev->base_addr;
u8 rx, tx, up;
- DEBUG(2, "%s: updating the statistics.\n", dev->name);
+ pr_debug("%s: updating the statistics.\n", dev->name);
if (inw(ioaddr+EL3_STATUS) == 0xffff) /* No card. */
return;
@@ -1037,7 +1029,7 @@ static int el3_rx(struct net_device *dev, int worklimit)
unsigned int ioaddr = dev->base_addr;
short rx_status;
- DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
worklimit > 0) {
@@ -1059,7 +1051,7 @@ static int el3_rx(struct net_device *dev, int worklimit)
skb = dev_alloc_skb(pkt_len+5);
- DEBUG(3, " Receiving packet size %d status %4.4x.\n",
+ pr_debug(" Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb_reserve(skb, 2);
@@ -1070,7 +1062,7 @@ static int el3_rx(struct net_device *dev, int worklimit)
dev->stats.rx_packets++;
dev->stats.rx_bytes += pkt_len;
} else {
- DEBUG(1, "%s: couldn't allocate a sk_buff of"
+ pr_debug("%s: couldn't allocate a sk_buff of"
" size %d.\n", dev->name, pkt_len);
dev->stats.rx_dropped++;
}
@@ -1099,7 +1091,7 @@ static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
struct mii_ioctl_data *data = if_mii(rq);
int phy = lp->phys & 0x1f;
- DEBUG(2, "%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
+ pr_debug("%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
dev->name, rq->ifr_ifrn.ifrn_name, cmd,
data->phy_id, data->reg_num, data->val_in, data->val_out);
@@ -1176,7 +1168,7 @@ static int el3_close(struct net_device *dev)
struct el3_private *lp = netdev_priv(dev);
struct pcmcia_device *link = lp->p_dev;
- DEBUG(2, "%s: shutting down ethercard.\n", dev->name);
+ dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
if (pcmcia_dev_present(link)) {
unsigned long flags;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index ea04356..4e18fc8 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -130,14 +130,6 @@ MODULE_LICENSE("GPL");
/* Special hook for setting if_port when module is loaded */
INT_MODULE_PARM(if_port, 0);
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-DRV_NAME ".c " DRV_VERSION " 2001/10/13 00:08:50 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -189,7 +181,7 @@ static int tc589_probe(struct pcmcia_device *link)
struct el3_private *lp;
struct net_device *dev;
- DEBUG(0, "3c589_attach()\n");
+ dev_dbg(&link->dev, "3c589_attach()\n");
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(struct el3_private));
@@ -231,7 +223,7 @@ static void tc589_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "3c589_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "3c589_detach\n");
if (link->dev_node)
unregister_netdev(dev);
@@ -249,21 +241,18 @@ static void tc589_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int tc589_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
struct el3_private *lp = netdev_priv(dev);
__be16 *phys_addr = NULL;
- int last_fn, last_ret, i, j, multi = 0, fifo;
+ int ret, i, j, multi = 0, fifo;
unsigned int ioaddr;
char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
u8 *buf;
size_t len;
- DEBUG(0, "3c589_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "3c589_config\n");
/* Is this a 3c562? */
if (link->manf_id != MANFID_3COM)
@@ -280,12 +269,16 @@ static int tc589_config(struct pcmcia_device *link)
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -341,8 +334,6 @@ static int tc589_config(struct pcmcia_device *link)
if_names[dev->if_port]);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
tc589_release(link);
return -ENODEV;
@@ -505,24 +496,8 @@ static void netdev_get_drvinfo(struct net_device *dev,
sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
}
-#ifdef PCMCIA_DEBUG
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
- return pc_debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 level)
-{
- pc_debug = level;
-}
-#endif /* PCMCIA_DEBUG */
-
static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
-#ifdef PCMCIA_DEBUG
- .get_msglevel = netdev_get_msglevel,
- .set_msglevel = netdev_set_msglevel,
-#endif /* PCMCIA_DEBUG */
};
static int el3_config(struct net_device *dev, struct ifmap *map)
@@ -557,7 +532,7 @@ static int el3_open(struct net_device *dev)
lp->media.expires = jiffies + HZ;
add_timer(&lp->media);
- DEBUG(1, "%s: opened, status %4.4x.\n",
+ dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
dev->name, inw(dev->base_addr + EL3_STATUS));
return 0;
@@ -590,7 +565,7 @@ static void pop_tx_status(struct net_device *dev)
if (tx_status & 0x30)
tc589_wait_for_completion(dev, TxReset);
if (tx_status & 0x38) {
- DEBUG(1, "%s: transmit error: status 0x%02x\n",
+ pr_debug("%s: transmit error: status 0x%02x\n",
dev->name, tx_status);
outw(TxEnable, ioaddr + EL3_CMD);
dev->stats.tx_aborted_errors++;
@@ -606,7 +581,7 @@ static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
struct el3_private *priv = netdev_priv(dev);
unsigned long flags;
- DEBUG(3, "%s: el3_start_xmit(length = %ld) called, "
+ pr_debug("%s: el3_start_xmit(length = %ld) called, "
"status %4.4x.\n", dev->name, (long)skb->len,
inw(ioaddr + EL3_STATUS));
@@ -648,14 +623,14 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
ioaddr = dev->base_addr;
- DEBUG(3, "%s: interrupt, status %4.4x.\n",
+ pr_debug("%s: interrupt, status %4.4x.\n",
dev->name, inw(ioaddr + EL3_STATUS));
spin_lock(&lp->lock);
while ((status = inw(ioaddr + EL3_STATUS)) &
(IntLatch | RxComplete | StatsFull)) {
if ((status & 0xe000) != 0x2000) {
- DEBUG(1, "%s: interrupt from dead card\n", dev->name);
+ pr_debug("%s: interrupt from dead card\n", dev->name);
handled = 0;
break;
}
@@ -664,7 +639,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
el3_rx(dev);
if (status & TxAvailable) {
- DEBUG(3, " TX room bit was handled.\n");
+ pr_debug(" TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue(dev);
@@ -716,7 +691,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
lp->last_irq = jiffies;
spin_unlock(&lp->lock);
- DEBUG(3, "%s: exiting interrupt, status %4.4x.\n",
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
dev->name, inw(ioaddr + EL3_STATUS));
return IRQ_RETVAL(handled);
}
@@ -827,7 +802,7 @@ static void update_stats(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
- DEBUG(2, "%s: updating the statistics.\n", dev->name);
+ pr_debug("%s: updating the statistics.\n", dev->name);
/* Turn off statistics updates while reading. */
outw(StatsDisable, ioaddr + EL3_CMD);
/* Switch to the stats window, and read everything. */
@@ -855,7 +830,7 @@ static int el3_rx(struct net_device *dev)
int worklimit = 32;
short rx_status;
- DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
worklimit > 0) {
@@ -877,7 +852,7 @@ static int el3_rx(struct net_device *dev)
skb = dev_alloc_skb(pkt_len+5);
- DEBUG(3, " Receiving packet size %d status %4.4x.\n",
+ pr_debug(" Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb_reserve(skb, 2);
@@ -888,7 +863,7 @@ static int el3_rx(struct net_device *dev)
dev->stats.rx_packets++;
dev->stats.rx_bytes += pkt_len;
} else {
- DEBUG(1, "%s: couldn't allocate a sk_buff of"
+ pr_debug("%s: couldn't allocate a sk_buff of"
" size %d.\n", dev->name, pkt_len);
dev->stats.rx_dropped++;
}
@@ -929,7 +904,7 @@ static int el3_close(struct net_device *dev)
struct pcmcia_device *link = lp->p_dev;
unsigned int ioaddr = dev->base_addr;
- DEBUG(1, "%s: shutting down ethercard.\n", dev->name);
+ dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
if (pcmcia_dev_present(link)) {
/* Turn off statistics ASAP. We update dev->stats below. */
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 3131a59..5af2ccf 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -75,16 +75,6 @@ MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("Asix AX88190 PCMCIA ethernet driver");
MODULE_LICENSE("GPL");
-#ifdef PCMCIA_DEBUG
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"axnet_cs.c 1.28 2002/06/29 06:27:37 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -167,7 +157,7 @@ static int axnet_probe(struct pcmcia_device *link)
struct net_device *dev;
struct ei_device *ei_local;
- DEBUG(0, "axnet_attach()\n");
+ dev_dbg(&link->dev, "axnet_attach()\n");
dev = alloc_etherdev(sizeof(struct ei_device) + sizeof(axnet_dev_t));
if (!dev)
@@ -205,7 +195,7 @@ static void axnet_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "axnet_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "axnet_detach(0x%p)\n", link);
if (link->dev_node)
unregister_netdev(dev);
@@ -272,9 +262,6 @@ static int get_prom(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
@@ -341,26 +328,29 @@ static int axnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
axnet_dev_t *info = PRIV(dev);
- int i, j, j2, last_ret, last_fn;
+ int i, j, j2, ret;
- DEBUG(0, "axnet_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "axnet_config(0x%p)\n", link);
/* don't trust the CIS on this; Linksys got it wrong */
link->conf.Present = 0x63;
- last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
- if (last_ret != 0) {
- cs_error(link, RequestIO, last_ret);
+ ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
+ if (ret != 0)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
if (link->io.NumPorts2 == 8) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
+
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -426,14 +416,12 @@ static int axnet_config(struct pcmcia_device *link)
dev->base_addr, dev->irq,
dev->dev_addr);
if (info->phy_id != -1) {
- DEBUG(0, " MII transceiver at index %d, status %x.\n", info->phy_id, j);
+ dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n", info->phy_id, j);
} else {
printk(KERN_NOTICE " No MII transceivers found!\n");
}
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
axnet_release(link);
return -ENODEV;
@@ -543,7 +531,7 @@ static int axnet_open(struct net_device *dev)
struct pcmcia_device *link = info->p_dev;
unsigned int nic_base = dev->base_addr;
- DEBUG(2, "axnet_open('%s')\n", dev->name);
+ dev_dbg(&link->dev, "axnet_open('%s')\n", dev->name);
if (!pcmcia_dev_present(link))
return -ENODEV;
@@ -572,7 +560,7 @@ static int axnet_close(struct net_device *dev)
axnet_dev_t *info = PRIV(dev);
struct pcmcia_device *link = info->p_dev;
- DEBUG(2, "axnet_close('%s')\n", dev->name);
+ dev_dbg(&link->dev, "axnet_close('%s')\n", dev->name);
ax_close(dev);
free_irq(dev->irq, dev);
@@ -741,10 +729,8 @@ static void block_input(struct net_device *dev, int count,
int xfer_count = count;
char *buf = skb->data;
-#ifdef PCMCIA_DEBUG
if ((ei_debug > 4) && (count != 4))
- printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4);
-#endif
+ pr_debug("%s: [bi=%d]\n", dev->name, count+4);
outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD);
@@ -762,10 +748,7 @@ static void block_output(struct net_device *dev, int count,
{
unsigned int nic_base = dev->base_addr;
-#ifdef PCMCIA_DEBUG
- if (ei_debug > 4)
- printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count);
-#endif
+ pr_debug("%s: [bo=%d]\n", dev->name, count);
/* Round the count up for word writes. Do we need to do this?
What effect will an odd byte count have on the 8390?
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 7b5c77b..9a2e500 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -53,11 +53,7 @@
#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
-#ifdef PCMCIA_DEBUG
-
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+#ifdef DEBUG
static void regdump(struct net_device *dev)
{
@@ -92,7 +88,6 @@ static void regdump(struct net_device *dev)
#else
-#define DEBUG(n, args...) do { } while (0)
static inline void regdump(struct net_device *dev) { }
#endif
@@ -144,7 +139,7 @@ static int com20020_probe(struct pcmcia_device *p_dev)
struct net_device *dev;
struct arcnet_local *lp;
- DEBUG(0, "com20020_attach()\n");
+ dev_dbg(&p_dev->dev, "com20020_attach()\n");
/* Create new network device */
info = kzalloc(sizeof(struct com20020_dev_t), GFP_KERNEL);
@@ -198,12 +193,12 @@ static void com20020_detach(struct pcmcia_device *link)
struct com20020_dev_t *info = link->priv;
struct net_device *dev = info->dev;
- DEBUG(1,"detach...\n");
+ dev_dbg(&link->dev, "detach...\n");
- DEBUG(0, "com20020_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "com20020_detach\n");
if (link->dev_node) {
- DEBUG(1,"unregister...\n");
+ dev_dbg(&link->dev, "unregister...\n");
unregister_netdev(dev);
@@ -218,16 +213,16 @@ static void com20020_detach(struct pcmcia_device *link)
com20020_release(link);
/* Unlink device structure, free bits */
- DEBUG(1,"unlinking...\n");
+ dev_dbg(&link->dev, "unlinking...\n");
if (link->priv)
{
dev = info->dev;
if (dev)
{
- DEBUG(1,"kfree...\n");
+ dev_dbg(&link->dev, "kfree...\n");
free_netdev(dev);
}
- DEBUG(1,"kfree2...\n");
+ dev_dbg(&link->dev, "kfree2...\n");
kfree(info);
}
@@ -241,25 +236,22 @@ static void com20020_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int com20020_config(struct pcmcia_device *link)
{
struct arcnet_local *lp;
com20020_dev_t *info;
struct net_device *dev;
- int i, last_ret, last_fn;
+ int i, ret;
int ioaddr;
info = link->priv;
dev = info->dev;
- DEBUG(1,"config...\n");
+ dev_dbg(&link->dev, "config...\n");
- DEBUG(0, "com20020_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "com20020_config\n");
- DEBUG(1,"arcnet: baseport1 is %Xh\n", link->io.BasePort1);
+ dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1);
i = -ENODEV;
if (!link->io.BasePort1)
{
@@ -276,26 +268,28 @@ static int com20020_config(struct pcmcia_device *link)
if (i != 0)
{
- DEBUG(1,"arcnet: requestIO failed totally!\n");
+ dev_dbg(&link->dev, "requestIO failed totally!\n");
goto failed;
}
ioaddr = dev->base_addr = link->io.BasePort1;
- DEBUG(1,"arcnet: got ioaddr %Xh\n", ioaddr);
+ dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
- DEBUG(1,"arcnet: request IRQ %d (%Xh/%Xh)\n",
+ dev_dbg(&link->dev, "request IRQ %d (%Xh/%Xh)\n",
link->irq.AssignedIRQ,
link->irq.IRQInfo1, link->irq.IRQInfo2);
i = pcmcia_request_irq(link, &link->irq);
if (i != 0)
{
- DEBUG(1,"arcnet: requestIRQ failed totally!\n");
+ dev_dbg(&link->dev, "requestIRQ failed totally!\n");
goto failed;
}
dev->irq = link->irq.AssignedIRQ;
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if (com20020_check(dev))
{
@@ -313,21 +307,20 @@ static int com20020_config(struct pcmcia_device *link)
i = com20020_found(dev, 0); /* calls register_netdev */
if (i != 0) {
- DEBUG(1,KERN_NOTICE "com20020_cs: com20020_found() failed\n");
+ dev_printk(KERN_NOTICE, &link->dev,
+ "com20020_cs: com20020_found() failed\n");
link->dev_node = NULL;
goto failed;
}
strcpy(info->node.dev_name, dev->name);
- DEBUG(1,KERN_INFO "%s: port %#3lx, irq %d\n",
+ dev_dbg(&link->dev,KERN_INFO "%s: port %#3lx, irq %d\n",
dev->name, dev->base_addr, dev->irq);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
- DEBUG(1,"com20020_config failed...\n");
+ dev_dbg(&link->dev, "com20020_config failed...\n");
com20020_release(link);
return -ENODEV;
} /* com20020_config */
@@ -342,7 +335,7 @@ failed:
static void com20020_release(struct pcmcia_device *link)
{
- DEBUG(0, "com20020_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "com20020_release\n");
pcmcia_disable_device(link);
}
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 58954a6..ecdff17 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -72,13 +72,6 @@ MODULE_LICENSE("GPL");
/* 0:4KB*2 TX buffer else:8KB*2 TX buffer */
INT_MODULE_PARM(sram_config, 0);
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = DRV_NAME ".c " DRV_VERSION " 2002/03/23";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
/*
@@ -245,7 +238,7 @@ static int fmvj18x_probe(struct pcmcia_device *link)
local_info_t *lp;
struct net_device *dev;
- DEBUG(0, "fmvj18x_attach()\n");
+ dev_dbg(&link->dev, "fmvj18x_attach()\n");
/* Make up a FMVJ18x specific data structure */
dev = alloc_etherdev(sizeof(local_info_t));
@@ -285,7 +278,7 @@ static void fmvj18x_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "fmvj18x_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "fmvj18x_detach\n");
if (link->dev_node)
unregister_netdev(dev);
@@ -297,9 +290,6 @@ static void fmvj18x_detach(struct pcmcia_device *link)
/*====================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int mfc_try_io_port(struct pcmcia_device *link)
{
int i, ret;
@@ -354,7 +344,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
local_info_t *lp = netdev_priv(dev);
- int i, last_fn = RequestIO, last_ret = 0, ret;
+ int i, ret;
unsigned int ioaddr;
cardtype_t cardtype;
char *card_name = "unknown";
@@ -362,7 +352,7 @@ static int fmvj18x_config(struct pcmcia_device *link)
size_t len;
u_char buggybuf[32];
- DEBUG(0, "fmvj18x_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "fmvj18x_config\n");
len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
if (buf)
@@ -370,9 +360,9 @@ static int fmvj18x_config(struct pcmcia_device *link)
if (len) {
/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
- last_ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
- if (last_ret != 0)
- goto cs_failed;
+ ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
+ if (ret != 0)
+ goto failed;
switch (link->manf_id) {
case MANFID_TDK:
@@ -441,15 +431,22 @@ static int fmvj18x_config(struct pcmcia_device *link)
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
ret = mfc_try_io_port(link);
- if (ret != 0) goto cs_failed;
+ if (ret != 0) goto failed;
} else if (cardtype == UNGERMANN) {
ret = ungermann_try_io_port(link);
- if (ret != 0) goto cs_failed;
+ if (ret != 0) goto failed;
} else {
- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
+ ret = pcmcia_request_io(link, &link->io);
+ if (ret)
+ goto failed;
}
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
+
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -554,9 +551,6 @@ static int fmvj18x_config(struct pcmcia_device *link)
return 0;
-cs_failed:
- /* All Card Services errors end up here */
- cs_error(link, last_fn, last_ret);
failed:
fmvj18x_release(link);
return -ENODEV;
@@ -575,10 +569,8 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != 0) {
- cs_error(link, RequestWindow, i);
+ if (i != 0)
return -1;
- }
base = ioremap(req.Base, req.Size);
mem.Page = 0;
@@ -609,8 +601,6 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
iounmap(base);
j = pcmcia_release_window(link->win);
- if (j != 0)
- cs_error(link, ReleaseWindow, j);
return (i != 0x200) ? 0 : -1;
} /* fmvj18x_get_hwinfo */
@@ -630,10 +620,8 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != 0) {
- cs_error(link, RequestWindow, i);
+ if (i != 0)
return -1;
- }
lp->base = ioremap(req.Base, req.Size);
if (lp->base == NULL) {
@@ -647,7 +635,6 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
if (i != 0) {
iounmap(lp->base);
lp->base = NULL;
- cs_error(link, MapMemPage, i);
return -1;
}
@@ -674,15 +661,13 @@ static void fmvj18x_release(struct pcmcia_device *link)
u_char __iomem *tmp;
int j;
- DEBUG(0, "fmvj18x_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "fmvj18x_release\n");
if (lp->base != NULL) {
tmp = lp->base;
lp->base = NULL; /* set NULL before iounmap */
iounmap(tmp);
j = pcmcia_release_window(link->win);
- if (j != 0)
- cs_error(link, ReleaseWindow, j);
}
pcmcia_disable_device(link);
@@ -791,8 +776,8 @@ static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
outb(tx_stat, ioaddr + TX_STATUS);
outb(rx_stat, ioaddr + RX_STATUS);
- DEBUG(4, "%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
- DEBUG(4, " tx_status %02x.\n", tx_stat);
+ pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
+ pr_debug(" tx_status %02x.\n", tx_stat);
if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
/* there is packet(s) in rx buffer */
@@ -812,8 +797,8 @@ static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
}
netif_wake_queue(dev);
}
- DEBUG(4, "%s: exiting interrupt,\n", dev->name);
- DEBUG(4, " tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
+ pr_debug("%s: exiting interrupt,\n", dev->name);
+ pr_debug(" tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
outb(D_TX_INTR, ioaddr + TX_INTR);
outb(D_RX_INTR, ioaddr + RX_INTR);
@@ -885,7 +870,7 @@ static netdev_tx_t fjn_start_xmit(struct sk_buff *skb,
return NETDEV_TX_BUSY;
}
- DEBUG(4, "%s: Transmitting a packet of length %lu.\n",
+ pr_debug("%s: Transmitting a packet of length %lu.\n",
dev->name, (unsigned long)skb->len);
dev->stats.tx_bytes += skb->len;
@@ -940,7 +925,7 @@ static void fjn_reset(struct net_device *dev)
unsigned int ioaddr = dev->base_addr;
int i;
- DEBUG(4, "fjn_reset(%s) called.\n",dev->name);
+ pr_debug("fjn_reset(%s) called.\n",dev->name);
/* Reset controller */
if( sram_config == 0 )
@@ -1018,13 +1003,13 @@ static void fjn_rx(struct net_device *dev)
unsigned int ioaddr = dev->base_addr;
int boguscount = 10; /* 5 -> 10: by agy 19940922 */
- DEBUG(4, "%s: in rx_packet(), rx_status %02x.\n",
+ pr_debug("%s: in rx_packet(), rx_status %02x.\n",
dev->name, inb(ioaddr + RX_STATUS));
while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
u_short status = inw(ioaddr + DATAPORT);
- DEBUG(4, "%s: Rxing packet mode %02x status %04x.\n",
+ pr_debug("%s: Rxing packet mode %02x status %04x.\n",
dev->name, inb(ioaddr + RX_MODE), status);
#ifndef final_version
if (status == 0) {
@@ -1064,16 +1049,14 @@ static void fjn_rx(struct net_device *dev)
(pkt_len + 1) >> 1);
skb->protocol = eth_type_trans(skb, dev);
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 5) {
+ {
int i;
- printk(KERN_DEBUG "%s: Rxed packet of length %d: ",
- dev->name, pkt_len);
+ pr_debug("%s: Rxed packet of length %d: ",
+ dev->name, pkt_len);
for (i = 0; i < 14; i++)
- printk(" %02x", skb->data[i]);
- printk(".\n");
+ pr_debug(" %02x", skb->data[i]);
+ pr_debug(".\n");
}
-#endif
netif_rx(skb);
dev->stats.rx_packets++;
@@ -1097,7 +1080,7 @@ static void fjn_rx(struct net_device *dev)
}
if (i > 0)
- DEBUG(5, "%s: Exint Rx packet with mode %02x after "
+ pr_debug("%s: Exint Rx packet with mode %02x after "
"%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
}
*/
@@ -1115,24 +1098,8 @@ static void netdev_get_drvinfo(struct net_device *dev,
sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
}
-#ifdef PCMCIA_DEBUG
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
- return pc_debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 level)
-{
- pc_debug = level;
-}
-#endif /* PCMCIA_DEBUG */
-
static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
-#ifdef PCMCIA_DEBUG
- .get_msglevel = netdev_get_msglevel,
- .set_msglevel = netdev_set_msglevel,
-#endif /* PCMCIA_DEBUG */
};
static int fjn_config(struct net_device *dev, struct ifmap *map){
@@ -1144,7 +1111,7 @@ static int fjn_open(struct net_device *dev)
struct local_info_t *lp = netdev_priv(dev);
struct pcmcia_device *link = lp->p_dev;
- DEBUG(4, "fjn_open('%s').\n", dev->name);
+ pr_debug("fjn_open('%s').\n", dev->name);
if (!pcmcia_dev_present(link))
return -ENODEV;
@@ -1170,7 +1137,7 @@ static int fjn_close(struct net_device *dev)
struct pcmcia_device *link = lp->p_dev;
unsigned int ioaddr = dev->base_addr;
- DEBUG(4, "fjn_close('%s').\n", dev->name);
+ pr_debug("fjn_close('%s').\n", dev->name);
lp->open_time = 0;
netif_stop_queue(dev);
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 06618af..0d914f3 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -69,17 +69,6 @@
#define PCMCIA
#include "../tokenring/ibmtr.c"
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"ibmtr_cs.c 1.10 1996/01/06 05:19:00 (Steve Kipisz)\n"
-" 2.2.7 1999/05/03 12:00:00 (Mike Phillips)\n"
-" 2.4.2 2001/30/28 Midnight (Burt Silverman)\n";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -143,7 +132,7 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
ibmtr_dev_t *info;
struct net_device *dev;
- DEBUG(0, "ibmtr_attach()\n");
+ dev_dbg(&link->dev, "ibmtr_attach()\n");
/* Create new token-ring device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -190,7 +179,7 @@ static void ibmtr_detach(struct pcmcia_device *link)
struct net_device *dev = info->dev;
struct tok_info *ti = netdev_priv(dev);
- DEBUG(0, "ibmtr_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "ibmtr_detach\n");
/*
* When the card removal interrupt hits tok_interrupt(),
@@ -217,9 +206,6 @@ static void ibmtr_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int __devinit ibmtr_config(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
@@ -227,9 +213,9 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
struct tok_info *ti = netdev_priv(dev);
win_req_t req;
memreq_t mem;
- int i, last_ret, last_fn;
+ int i, ret;
- DEBUG(0, "ibmtr_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "ibmtr_config\n");
link->conf.ConfigIndex = 0x61;
@@ -241,11 +227,15 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
if (i != 0) {
/* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
link->io.BasePort1 = 0xA24;
- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
+ ret = pcmcia_request_io(link, &link->io);
+ if (ret)
+ goto failed;
}
dev->base_addr = link->io.BasePort1;
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
ti->irq = link->irq.AssignedIRQ;
ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
@@ -256,11 +246,15 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x2000;
req.AccessSpeed = 250;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(&link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = mmiobase;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link->win, &mem);
+ if (ret)
+ goto failed;
ti->mmio = ioremap(req.Base, req.Size);
/* Allocate the SRAM memory window */
@@ -269,17 +263,23 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = sramsize * 1024;
req.AccessSpeed = 250;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &info->sram_win_handle));
+ ret = pcmcia_request_window(&link, &req, &info->sram_win_handle);
+ if (ret)
+ goto failed;
mem.CardOffset = srambase;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(info->sram_win_handle, &mem));
+ ret = pcmcia_map_mem_page(info->sram_win_handle, &mem);
+ if (ret)
+ goto failed;
ti->sram_base = mem.CardOffset >> 12;
ti->sram_virt = ioremap(req.Base, req.Size);
ti->sram_phys = req.Base;
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Set up the Token-Ring Controller Configuration Register and
turn on the card. Check the "Local Area Network Credit Card
@@ -305,8 +305,6 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
dev->dev_addr);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
ibmtr_release(link);
return -ENODEV;
@@ -325,7 +323,7 @@ static void ibmtr_release(struct pcmcia_device *link)
ibmtr_dev_t *info = link->priv;
struct net_device *dev = info->dev;
- DEBUG(0, "ibmtr_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "ibmtr_release\n");
if (link->win) {
struct tok_info *ti = netdev_priv(dev);
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 4b96b35..a536348 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -381,13 +381,6 @@ typedef struct _mace_private {
Private Global Variables
---------------------------------------------------------------------------- */
-#ifdef PCMCIA_DEBUG
-static char rcsid[] =
-"nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao";
-static char *version =
-DRV_NAME " " DRV_VERSION " (Roger C. Pao)";
-#endif
-
static const char *if_names[]={
"Auto", "10baseT", "BNC",
};
@@ -406,12 +399,6 @@ MODULE_LICENSE("GPL");
/* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
INT_MODULE_PARM(if_port, 0);
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
/* ----------------------------------------------------------------------------
Function Prototypes
@@ -462,8 +449,7 @@ static int nmclan_probe(struct pcmcia_device *link)
mace_private *lp;
struct net_device *dev;
- DEBUG(0, "nmclan_attach()\n");
- DEBUG(1, "%s\n", rcsid);
+ dev_dbg(&link->dev, "nmclan_attach()\n");
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(mace_private));
@@ -507,7 +493,7 @@ static void nmclan_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "nmclan_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "nmclan_detach\n");
if (link->dev_node)
unregister_netdev(dev);
@@ -654,23 +640,27 @@ nmclan_config
ethernet device available to the system.
---------------------------------------------------------------------------- */
-#define CS_CHECK(fn, ret) \
- do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int nmclan_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
mace_private *lp = netdev_priv(dev);
u8 *buf;
size_t len;
- int i, last_ret, last_fn;
+ int i, ret;
unsigned int ioaddr;
- DEBUG(0, "nmclan_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "nmclan_config\n");
+
+ ret = pcmcia_request_io(link, &link->io);
+ if (ret)
+ goto failed;
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -692,7 +682,7 @@ static int nmclan_config(struct pcmcia_device *link)
sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL);
sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH);
if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) {
- DEBUG(0, "nmclan_cs configured: mace id=%x %x\n",
+ dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n",
sig[0], sig[1]);
} else {
printk(KERN_NOTICE "nmclan_cs: mace id not found: %x %x should"
@@ -728,8 +718,6 @@ static int nmclan_config(struct pcmcia_device *link)
dev->dev_addr);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
nmclan_release(link);
return -ENODEV;
@@ -743,7 +731,7 @@ nmclan_release
---------------------------------------------------------------------------- */
static void nmclan_release(struct pcmcia_device *link)
{
- DEBUG(0, "nmclan_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "nmclan_release\n");
pcmcia_disable_device(link);
}
@@ -794,7 +782,7 @@ static void nmclan_reset(struct net_device *dev)
/* Reset Xilinx */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
- DEBUG(1, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
+ dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
OrigCorValue);
reg.Value = COR_SOFT_RESET;
pcmcia_access_configuration_register(link, ®);
@@ -871,7 +859,7 @@ static int mace_close(struct net_device *dev)
mace_private *lp = netdev_priv(dev);
struct pcmcia_device *link = lp->p_dev;
- DEBUG(2, "%s: shutting down ethercard.\n", dev->name);
+ dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
/* Mask off all interrupts from the MACE chip. */
outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR);
@@ -890,24 +878,8 @@ static void netdev_get_drvinfo(struct net_device *dev,
sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
}
-#ifdef PCMCIA_DEBUG
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
- return pc_debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 level)
-{
- pc_debug = level;
-}
-#endif /* PCMCIA_DEBUG */
-
static const struct ethtool_ops netdev_ethtool_ops = {
.get_drvinfo = netdev_get_drvinfo,
-#ifdef PCMCIA_DEBUG
- .get_msglevel = netdev_get_msglevel,
- .set_msglevel = netdev_set_msglevel,
-#endif /* PCMCIA_DEBUG */
};
/* ----------------------------------------------------------------------------
@@ -945,7 +917,7 @@ static netdev_tx_t mace_start_xmit(struct sk_buff *skb,
netif_stop_queue(dev);
- DEBUG(3, "%s: mace_start_xmit(length = %ld) called.\n",
+ pr_debug("%s: mace_start_xmit(length = %ld) called.\n",
dev->name, (long)skb->len);
#if (!TX_INTERRUPTABLE)
@@ -1007,7 +979,7 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id)
int IntrCnt = MACE_MAX_IR_ITERATIONS;
if (dev == NULL) {
- DEBUG(2, "mace_interrupt(): irq 0x%X for unknown device.\n",
+ pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n",
irq);
return IRQ_NONE;
}
@@ -1030,7 +1002,7 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id)
}
if (!netif_device_present(dev)) {
- DEBUG(2, "%s: interrupt from dead card\n", dev->name);
+ pr_debug("%s: interrupt from dead card\n", dev->name);
return IRQ_NONE;
}
@@ -1038,7 +1010,7 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id)
/* WARNING: MACE_IR is a READ/CLEAR port! */
status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR);
- DEBUG(3, "mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
+ pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
if (status & MACE_IR_RCVINT) {
mace_rx(dev, MACE_MAX_RX_ITERATIONS);
@@ -1157,7 +1129,7 @@ static int mace_rx(struct net_device *dev, unsigned char RxCnt)
) {
rx_status = inw(ioaddr + AM2150_RCV);
- DEBUG(3, "%s: in mace_rx(), framecnt 0x%X, rx_status"
+ pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status"
" 0x%X.\n", dev->name, rx_framecnt, rx_status);
if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */
@@ -1184,7 +1156,7 @@ static int mace_rx(struct net_device *dev, unsigned char RxCnt)
lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV);
/* rcv collision count */
- DEBUG(3, " receiving packet size 0x%X rx_status"
+ pr_debug(" receiving packet size 0x%X rx_status"
" 0x%X.\n", pkt_len, rx_status);
skb = dev_alloc_skb(pkt_len+2);
@@ -1203,7 +1175,7 @@ static int mace_rx(struct net_device *dev, unsigned char RxCnt)
outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
continue;
} else {
- DEBUG(1, "%s: couldn't allocate a sk_buff of size"
+ pr_debug("%s: couldn't allocate a sk_buff of size"
" %d.\n", dev->name, pkt_len);
lp->linux_stats.rx_dropped++;
}
@@ -1219,28 +1191,28 @@ pr_linux_stats
---------------------------------------------------------------------------- */
static void pr_linux_stats(struct net_device_stats *pstats)
{
- DEBUG(2, "pr_linux_stats\n");
- DEBUG(2, " rx_packets=%-7ld tx_packets=%ld\n",
+ pr_debug("pr_linux_stats\n");
+ pr_debug(" rx_packets=%-7ld tx_packets=%ld\n",
(long)pstats->rx_packets, (long)pstats->tx_packets);
- DEBUG(2, " rx_errors=%-7ld tx_errors=%ld\n",
+ pr_debug(" rx_errors=%-7ld tx_errors=%ld\n",
(long)pstats->rx_errors, (long)pstats->tx_errors);
- DEBUG(2, " rx_dropped=%-7ld tx_dropped=%ld\n",
+ pr_debug(" rx_dropped=%-7ld tx_dropped=%ld\n",
(long)pstats->rx_dropped, (long)pstats->tx_dropped);
- DEBUG(2, " multicast=%-7ld collisions=%ld\n",
+ pr_debug(" multicast=%-7ld collisions=%ld\n",
(long)pstats->multicast, (long)pstats->collisions);
- DEBUG(2, " rx_length_errors=%-7ld rx_over_errors=%ld\n",
+ pr_debug(" rx_length_errors=%-7ld rx_over_errors=%ld\n",
(long)pstats->rx_length_errors, (long)pstats->rx_over_errors);
- DEBUG(2, " rx_crc_errors=%-7ld rx_frame_errors=%ld\n",
+ pr_debug(" rx_crc_errors=%-7ld rx_frame_errors=%ld\n",
(long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors);
- DEBUG(2, " rx_fifo_errors=%-7ld rx_missed_errors=%ld\n",
+ pr_debug(" rx_fifo_errors=%-7ld rx_missed_errors=%ld\n",
(long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors);
- DEBUG(2, " tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
+ pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
(long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors);
- DEBUG(2, " tx_fifo_errors=%-7ld tx_heartbeat_errors=%ld\n",
+ pr_debug(" tx_fifo_errors=%-7ld tx_heartbeat_errors=%ld\n",
(long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors);
- DEBUG(2, " tx_window_errors=%ld\n",
+ pr_debug(" tx_window_errors=%ld\n",
(long)pstats->tx_window_errors);
} /* pr_linux_stats */
@@ -1249,48 +1221,48 @@ pr_mace_stats
---------------------------------------------------------------------------- */
static void pr_mace_stats(mace_statistics *pstats)
{
- DEBUG(2, "pr_mace_stats\n");
+ pr_debug("pr_mace_stats\n");
- DEBUG(2, " xmtsv=%-7d uflo=%d\n",
+ pr_debug(" xmtsv=%-7d uflo=%d\n",
pstats->xmtsv, pstats->uflo);
- DEBUG(2, " lcol=%-7d more=%d\n",
+ pr_debug(" lcol=%-7d more=%d\n",
pstats->lcol, pstats->more);
- DEBUG(2, " one=%-7d defer=%d\n",
+ pr_debug(" one=%-7d defer=%d\n",
pstats->one, pstats->defer);
- DEBUG(2, " lcar=%-7d rtry=%d\n",
+ pr_debug(" lcar=%-7d rtry=%d\n",
pstats->lcar, pstats->rtry);
/* MACE_XMTRC */
- DEBUG(2, " exdef=%-7d xmtrc=%d\n",
+ pr_debug(" exdef=%-7d xmtrc=%d\n",
pstats->exdef, pstats->xmtrc);
/* RFS1--Receive Status (RCVSTS) */
- DEBUG(2, " oflo=%-7d clsn=%d\n",
+ pr_debug(" oflo=%-7d clsn=%d\n",
pstats->oflo, pstats->clsn);
- DEBUG(2, " fram=%-7d fcs=%d\n",
+ pr_debug(" fram=%-7d fcs=%d\n",
pstats->fram, pstats->fcs);
/* RFS2--Runt Packet Count (RNTPC) */
/* RFS3--Receive Collision Count (RCVCC) */
- DEBUG(2, " rfs_rntpc=%-7d rfs_rcvcc=%d\n",
+ pr_debug(" rfs_rntpc=%-7d rfs_rcvcc=%d\n",
pstats->rfs_rntpc, pstats->rfs_rcvcc);
/* MACE_IR */
- DEBUG(2, " jab=%-7d babl=%d\n",
+ pr_debug(" jab=%-7d babl=%d\n",
pstats->jab, pstats->babl);
- DEBUG(2, " cerr=%-7d rcvcco=%d\n",
+ pr_debug(" cerr=%-7d rcvcco=%d\n",
pstats->cerr, pstats->rcvcco);
- DEBUG(2, " rntpco=%-7d mpco=%d\n",
+ pr_debug(" rntpco=%-7d mpco=%d\n",
pstats->rntpco, pstats->mpco);
/* MACE_MPC */
- DEBUG(2, " mpc=%d\n", pstats->mpc);
+ pr_debug(" mpc=%d\n", pstats->mpc);
/* MACE_RNTPC */
- DEBUG(2, " rntpc=%d\n", pstats->rntpc);
+ pr_debug(" rntpc=%d\n", pstats->rntpc);
/* MACE_RCVCC */
- DEBUG(2, " rcvcc=%d\n", pstats->rcvcc);
+ pr_debug(" rcvcc=%d\n", pstats->rcvcc);
} /* pr_mace_stats */
@@ -1359,7 +1331,7 @@ static struct net_device_stats *mace_get_stats(struct net_device *dev)
update_stats(dev->base_addr, dev);
- DEBUG(1, "%s: updating the statistics.\n", dev->name);
+ pr_debug("%s: updating the statistics.\n", dev->name);
pr_linux_stats(&lp->linux_stats);
pr_mace_stats(&lp->mace_stats);
@@ -1426,7 +1398,7 @@ static void BuildLAF(int *ladrf, int *adr)
ladrf[byte] |= (1 << (hashcode & 7));
#ifdef PCMCIA_DEBUG
- if (pc_debug > 2)
+ if (0)
printk(KERN_DEBUG " adr =%pM\n", adr);
printk(KERN_DEBUG " hashcode = %d(decimal), ladrf[0:63] =", hashcode);
for (i = 0; i < 8; i++)
@@ -1453,12 +1425,12 @@ static void restore_multicast_list(struct net_device *dev)
unsigned int ioaddr = dev->base_addr;
int i;
- DEBUG(2, "%s: restoring Rx mode to %d addresses.\n",
+ pr_debug("%s: restoring Rx mode to %d addresses.\n",
dev->name, num_addrs);
if (num_addrs > 0) {
- DEBUG(1, "Attempt to restore multicast list detected.\n");
+ pr_debug("Attempt to restore multicast list detected.\n");
mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR);
/* Poll ADDRCHG bit */
@@ -1510,11 +1482,11 @@ static void set_multicast_list(struct net_device *dev)
struct dev_mc_list *dmi = dev->mc_list;
#ifdef PCMCIA_DEBUG
- if (pc_debug > 1) {
+ {
static int old;
if (dev->mc_count != old) {
old = dev->mc_count;
- DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ pr_debug("%s: setting Rx mode to %d addresses.\n",
dev->name, old);
}
}
@@ -1545,7 +1517,7 @@ static void restore_multicast_list(struct net_device *dev)
unsigned int ioaddr = dev->base_addr;
mace_private *lp = netdev_priv(dev);
- DEBUG(2, "%s: restoring Rx mode to %d addresses.\n", dev->name,
+ pr_debug("%s: restoring Rx mode to %d addresses.\n", dev->name,
lp->multicast_num_addrs);
if (dev->flags & IFF_PROMISC) {
@@ -1566,11 +1538,11 @@ static void set_multicast_list(struct net_device *dev)
mace_private *lp = netdev_priv(dev);
#ifdef PCMCIA_DEBUG
- if (pc_debug > 1) {
+ {
static int old;
if (dev->mc_count != old) {
old = dev->mc_count;
- DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ pr_debug("%s: setting Rx mode to %d addresses.\n",
dev->name, old);
}
}
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index bd3447f..80ab9de 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -71,15 +71,6 @@
static const char *if_names[] = { "auto", "10baseT", "10base2"};
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"pcnet_cs.c 1.153 2003/11/09 18:53:09 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -265,7 +256,7 @@ static int pcnet_probe(struct pcmcia_device *link)
pcnet_dev_t *info;
struct net_device *dev;
- DEBUG(0, "pcnet_attach()\n");
+ dev_dbg(&link->dev, "pcnet_attach()\n");
/* Create new ethernet device */
dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
@@ -297,7 +288,7 @@ static void pcnet_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "pcnet_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "pcnet_detach\n");
if (link->dev_node)
unregister_netdev(dev);
@@ -327,10 +318,8 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != 0) {
- cs_error(link, RequestWindow, i);
+ if (i != 0)
return NULL;
- }
virt = ioremap(req.Base, req.Size);
mem.Page = 0;
@@ -349,8 +338,6 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
iounmap(virt);
j = pcmcia_release_window(link->win);
- if (j != 0)
- cs_error(link, ReleaseWindow, j);
return (i < NR_INFO) ? hw_info+i : NULL;
} /* get_hwinfo */
@@ -495,9 +482,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
@@ -567,19 +551,19 @@ static int pcnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- int last_ret, last_fn, start_pg, stop_pg, cm_offset;
+ int ret, start_pg, stop_pg, cm_offset;
int has_shmem = 0;
hw_info_t *local_hw_info;
- DEBUG(0, "pcnet_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "pcnet_config\n");
- last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
- if (last_ret) {
- cs_error(link, RequestIO, last_ret);
+ ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
+ if (ret)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
if (link->io.NumPorts2 == 8) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -589,7 +573,9 @@ static int pcnet_config(struct pcmcia_device *link)
(link->card_id == PRODID_IBM_HOME_AND_AWAY))
link->conf.ConfigIndex |= 0x10;
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
if (info->flags & HAS_MISC_REG) {
@@ -687,8 +673,6 @@ static int pcnet_config(struct pcmcia_device *link)
printk(" hw_addr %pM\n", dev->dev_addr);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
pcnet_release(link);
return -ENODEV;
@@ -706,7 +690,7 @@ static void pcnet_release(struct pcmcia_device *link)
{
pcnet_dev_t *info = PRIV(link->priv);
- DEBUG(0, "pcnet_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "pcnet_release\n");
if (info->flags & USE_SHMEM)
iounmap(info->base);
@@ -960,7 +944,7 @@ static void mii_phy_probe(struct net_device *dev)
phyid = tmp << 16;
phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
phyid &= MII_PHYID_REV_MASK;
- DEBUG(0, "%s: MII at %d is 0x%08x\n", dev->name, i, phyid);
+ pr_debug("%s: MII at %d is 0x%08x\n", dev->name, i, phyid);
if (phyid == AM79C9XX_HOME_PHY) {
info->pna_phy = i;
} else if (phyid != AM79C9XX_ETH_PHY) {
@@ -976,7 +960,7 @@ static int pcnet_open(struct net_device *dev)
struct pcmcia_device *link = info->p_dev;
unsigned int nic_base = dev->base_addr;
- DEBUG(2, "pcnet_open('%s')\n", dev->name);
+ dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name);
if (!pcmcia_dev_present(link))
return -ENODEV;
@@ -1008,7 +992,7 @@ static int pcnet_close(struct net_device *dev)
pcnet_dev_t *info = PRIV(dev);
struct pcmcia_device *link = info->p_dev;
- DEBUG(2, "pcnet_close('%s')\n", dev->name);
+ dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name);
ei_close(dev);
free_irq(dev->irq, dev);
@@ -1251,10 +1235,8 @@ static void dma_block_input(struct net_device *dev, int count,
int xfer_count = count;
char *buf = skb->data;
-#ifdef PCMCIA_DEBUG
if ((ei_debug > 4) && (count != 4))
- printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4);
-#endif
+ pr_debug("%s: [bi=%d]\n", dev->name, count+4);
if (ei_status.dmaing) {
printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
"[DMAstat:%1x][irqlock:%1x]\n",
@@ -1495,7 +1477,7 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
pcnet_dev_t *info = PRIV(dev);
win_req_t req;
memreq_t mem;
- int i, window_size, offset, last_ret, last_fn;
+ int i, window_size, offset, ret;
window_size = (stop_pg - start_pg) << 8;
if (window_size > 32 * 1024)
@@ -1509,13 +1491,17 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
req.Attributes |= WIN_USE_WAIT;
req.Base = 0; req.Size = window_size;
req.AccessSpeed = mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(&link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = (start_pg << 8) + cm_offset;
offset = mem.CardOffset % window_size;
mem.CardOffset -= offset;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link->win, &mem);
+ if (ret)
+ goto failed;
/* Try scribbling on the buffer */
info->base = ioremap(req.Base, window_size);
@@ -1549,8 +1535,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg,
info->flags |= USE_SHMEM;
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
return 1;
}
@@ -1788,7 +1772,6 @@ static int __init init_pcnet_cs(void)
static void __exit exit_pcnet_cs(void)
{
- DEBUG(0, "pcnet_cs: unloading\n");
pcmcia_unregister_driver(&pcnet_driver);
}
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index df92bcd..580ec44 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -79,14 +79,6 @@ MODULE_FIRMWARE(FIRMWARE_NAME);
*/
INT_MODULE_PARM(if_port, 0);
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-static const char *version =
-"smc91c92_cs.c 1.123 2006/11/09 Donald Becker, becker@scyld.com.\n";
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
#define DRV_NAME "smc91c92_cs"
#define DRV_VERSION "1.123"
@@ -323,7 +315,7 @@ static int smc91c92_probe(struct pcmcia_device *link)
struct smc_private *smc;
struct net_device *dev;
- DEBUG(0, "smc91c92_attach()\n");
+ dev_dbg(&link->dev, "smc91c92_attach()\n");
/* Create new ethernet device */
dev = alloc_etherdev(sizeof(struct smc_private));
@@ -371,7 +363,7 @@ static void smc91c92_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "smc91c92_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "smc91c92_detach\n");
if (link->dev_node)
unregister_netdev(dev);
@@ -746,7 +738,7 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
/* Now, turn on the interrupt for both card functions */
set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
- DEBUG(2, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
+ dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
inw(link->io.BasePort1 + OSITECH_AUI_PWR),
inw(link->io.BasePort1 + OSITECH_RESET_ISR));
}
@@ -860,12 +852,6 @@ static int check_sig(struct pcmcia_device *link)
======================================================================*/
-#define CS_EXIT_TEST(ret, svc, label) \
-if (ret != 0) { \
- cs_error(link, svc, ret); \
- goto label; \
-}
-
static int smc91c92_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -875,7 +861,7 @@ static int smc91c92_config(struct pcmcia_device *link)
unsigned int ioaddr;
u_long mir;
- DEBUG(0, "smc91c92_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "smc91c92_config\n");
smc->manfid = link->manf_id;
smc->cardid = link->card_id;
@@ -891,12 +877,15 @@ static int smc91c92_config(struct pcmcia_device *link)
} else {
i = smc_config(link);
}
- CS_EXIT_TEST(i, RequestIO, config_failed);
+ if (i)
+ goto config_failed;
i = pcmcia_request_irq(link, &link->irq);
- CS_EXIT_TEST(i, RequestIRQ, config_failed);
+ if (i)
+ goto config_failed;
i = pcmcia_request_configuration(link, &link->conf);
- CS_EXIT_TEST(i, RequestConfiguration, config_failed);
+ if (i)
+ goto config_failed;
if (smc->manfid == MANFID_MOTOROLA)
mot_config(link);
@@ -1001,7 +990,7 @@ static int smc91c92_config(struct pcmcia_device *link)
if (smc->cfg & CFG_MII_SELECT) {
if (smc->mii_if.phy_id != -1) {
- DEBUG(0, " MII transceiver at index %d, status %x.\n",
+ dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n",
smc->mii_if.phy_id, j);
} else {
printk(KERN_NOTICE " No MII transceivers found!\n");
@@ -1011,7 +1000,7 @@ static int smc91c92_config(struct pcmcia_device *link)
config_undo:
unregister_netdev(dev);
-config_failed: /* CS_EXIT_TEST() calls jump to here... */
+config_failed:
smc91c92_release(link);
return -ENODEV;
} /* smc91c92_config */
@@ -1026,7 +1015,7 @@ config_failed: /* CS_EXIT_TEST() calls jump to here... */
static void smc91c92_release(struct pcmcia_device *link)
{
- DEBUG(0, "smc91c92_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "smc91c92_release\n");
if (link->win) {
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
@@ -1123,10 +1112,10 @@ static int smc_open(struct net_device *dev)
struct smc_private *smc = netdev_priv(dev);
struct pcmcia_device *link = smc->p_dev;
-#ifdef PCMCIA_DEBUG
- DEBUG(0, "%s: smc_open(%p), ID/Window %4.4x.\n",
+ dev_dbg(&link->dev, "%s: smc_open(%p), ID/Window %4.4x.\n",
dev->name, dev, inw(dev->base_addr + BANK_SELECT));
- if (pc_debug > 1) smc_dump(dev);
+#ifdef PCMCIA_DEBUG
+ smc_dump(dev);
#endif
/* Check that the PCMCIA card is still here. */
@@ -1161,7 +1150,7 @@ static int smc_close(struct net_device *dev)
struct pcmcia_device *link = smc->p_dev;
unsigned int ioaddr = dev->base_addr;
- DEBUG(0, "%s: smc_close(), status %4.4x.\n",
+ dev_dbg(&link->dev, "%s: smc_close(), status %4.4x.\n",
dev->name, inw(ioaddr + BANK_SELECT));
netif_stop_queue(dev);
@@ -1228,7 +1217,7 @@ static void smc_hardware_send_packet(struct net_device * dev)
u_char *buf = skb->data;
u_int length = skb->len; /* The chip will pad to ethernet min. */
- DEBUG(2, "%s: Trying to xmit packet of length %d.\n",
+ pr_debug("%s: Trying to xmit packet of length %d.\n",
dev->name, length);
/* send the packet length: +6 for status word, length, and ctl */
@@ -1283,7 +1272,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
netif_stop_queue(dev);
- DEBUG(2, "%s: smc_start_xmit(length = %d) called,"
+ pr_debug("%s: smc_start_xmit(length = %d) called,"
" status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2));
if (smc->saved_skb) {
@@ -1330,7 +1319,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
}
/* Otherwise defer until the Tx-space-allocated interrupt. */
- DEBUG(2, "%s: memory allocation deferred.\n", dev->name);
+ pr_debug("%s: memory allocation deferred.\n", dev->name);
outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
spin_unlock_irqrestore(&smc->lock, flags);
@@ -1395,7 +1384,7 @@ static void smc_eph_irq(struct net_device *dev)
SMC_SELECT_BANK(0);
ephs = inw(ioaddr + EPH);
- DEBUG(2, "%s: Ethernet protocol handler interrupt, status"
+ pr_debug("%s: Ethernet protocol handler interrupt, status"
" %4.4x.\n", dev->name, ephs);
/* Could be a counter roll-over warning: update stats. */
card_stats = inw(ioaddr + COUNTER);
@@ -1435,7 +1424,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
ioaddr = dev->base_addr;
- DEBUG(3, "%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
+ pr_debug("%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
irq, ioaddr);
spin_lock(&smc->lock);
@@ -1444,7 +1433,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
if ((saved_bank & 0xff00) != 0x3300) {
/* The device does not exist -- the card could be off-line, or
maybe it has been ejected. */
- DEBUG(1, "%s: SMC91c92 interrupt %d for non-existent"
+ pr_debug("%s: SMC91c92 interrupt %d for non-existent"
"/ejected device.\n", dev->name, irq);
handled = 0;
goto irq_done;
@@ -1458,7 +1447,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
do { /* read the status flag, and mask it */
status = inw(ioaddr + INTERRUPT) & 0xff;
- DEBUG(3, "%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
+ pr_debug("%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
status, mask);
if ((status & mask) == 0) {
if (bogus_cnt == INTR_WORK)
@@ -1503,7 +1492,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
smc_eph_irq(dev);
} while (--bogus_cnt);
- DEBUG(3, " Restoring saved registers mask %2.2x bank %4.4x"
+ pr_debug(" Restoring saved registers mask %2.2x bank %4.4x"
" pointer %4.4x.\n", mask, saved_bank, saved_pointer);
/* restore state register */
@@ -1511,7 +1500,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id)
outw(saved_pointer, ioaddr + POINTER);
SMC_SELECT_BANK(saved_bank);
- DEBUG(3, "%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
+ pr_debug("%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
irq_done:
@@ -1562,7 +1551,7 @@ static void smc_rx(struct net_device *dev)
rx_status = inw(ioaddr + DATA_1);
packet_length = inw(ioaddr + DATA_1) & 0x07ff;
- DEBUG(2, "%s: Receive status %4.4x length %d.\n",
+ pr_debug("%s: Receive status %4.4x length %d.\n",
dev->name, rx_status, packet_length);
if (!(rx_status & RS_ERRORS)) {
@@ -1573,7 +1562,7 @@ static void smc_rx(struct net_device *dev)
skb = dev_alloc_skb(packet_length+2);
if (skb == NULL) {
- DEBUG(1, "%s: Low memory, packet dropped.\n", dev->name);
+ pr_debug("%s: Low memory, packet dropped.\n", dev->name);
dev->stats.rx_dropped++;
outw(MC_RELEASE, ioaddr + MMU_CMD);
return;
@@ -1733,7 +1722,7 @@ static void smc_reset(struct net_device *dev)
struct smc_private *smc = netdev_priv(dev);
int i;
- DEBUG(0, "%s: smc91c92 reset called.\n", dev->name);
+ pr_debug("%s: smc91c92 reset called.\n", dev->name);
/* The first interaction must be a write to bring the chip out
of sleep mode. */
@@ -2050,18 +2039,6 @@ static u32 smc_get_link(struct net_device *dev)
return ret;
}
-#ifdef PCMCIA_DEBUG
-static u32 smc_get_msglevel(struct net_device *dev)
-{
- return pc_debug;
-}
-
-static void smc_set_msglevel(struct net_device *dev, u32 val)
-{
- pc_debug = val;
-}
-#endif
-
static int smc_nway_reset(struct net_device *dev)
{
struct smc_private *smc = netdev_priv(dev);
@@ -2085,10 +2062,6 @@ static const struct ethtool_ops ethtool_ops = {
.get_settings = smc_get_settings,
.set_settings = smc_set_settings,
.get_link = smc_get_link,
-#ifdef PCMCIA_DEBUG
- .get_msglevel = smc_get_msglevel,
- .set_msglevel = smc_set_msglevel,
-#endif
.nway_reset = smc_nway_reset,
};
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 8ed8449..132a528 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -211,20 +211,6 @@ enum xirc_cmd { /* Commands */
static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
-/****************
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- * you do not define PCMCIA_DEBUG at all, all the debug code will be
- * left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- * be present but disabled -- but it can then be enabled for specific
- * modules at load time with a 'pc_debug=#' option to insmod.
- */
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args)
-#else
-#define DEBUG(n, args...)
-#endif
#define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
#define KERR_XIRC KERN_ERR "xirc2ps_cs: "
@@ -378,7 +364,7 @@ static int do_stop(struct net_device *dev);
#define PutWord(reg,value) outw((value), ioaddr+(reg))
/*====== Functions used for debugging =================================*/
-#if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */
+#if 0 /* reading regs may change system status */
static void
PrintRegisters(struct net_device *dev)
{
@@ -410,7 +396,7 @@ PrintRegisters(struct net_device *dev)
}
}
}
-#endif /* PCMCIA_DEBUG */
+#endif /* 0 */
/*============== MII Management functions ===============*/
@@ -554,7 +540,7 @@ xirc2ps_probe(struct pcmcia_device *link)
struct net_device *dev;
local_info_t *local;
- DEBUG(0, "attach()\n");
+ dev_dbg(&link->dev, "attach()\n");
/* Allocate the device structure */
dev = alloc_etherdev(sizeof(local_info_t));
@@ -593,7 +579,7 @@ xirc2ps_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "detach\n");
if (link->dev_node)
unregister_netdev(dev);
@@ -626,13 +612,11 @@ set_card_type(struct pcmcia_device *link, const void *s)
{
struct net_device *dev = link->priv;
local_info_t *local = netdev_priv(dev);
- #ifdef PCMCIA_DEBUG
unsigned cisrev = ((const unsigned char *)s)[2];
- #endif
unsigned mediaid= ((const unsigned char *)s)[3];
unsigned prodid = ((const unsigned char *)s)[4];
- DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n",
+ dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n",
cisrev, mediaid, prodid);
local->mohawk = 0;
@@ -778,7 +762,7 @@ xirc2ps_config(struct pcmcia_device * link)
local->dingo_ccr = NULL;
- DEBUG(0, "config(0x%p)\n", link);
+ dev_dbg(&link->dev, "config\n");
/*
* This reads the card's CONFIG tuple to find its configuration
@@ -817,7 +801,7 @@ xirc2ps_config(struct pcmcia_device * link)
(unsigned)parse.manfid.manf);
goto failure;
}
- DEBUG(0, "found %s card\n", local->manf_str);
+ dev_dbg(&link->dev, "found %s card\n", local->manf_str);
if (!set_card_type(link, buf)) {
printk(KNOT_XIRC "this card is not supported\n");
@@ -892,10 +876,8 @@ xirc2ps_config(struct pcmcia_device * link)
goto port_found;
}
link->io.BasePort1 = 0; /* let CS decide */
- if ((err=pcmcia_request_io(link, &link->io))) {
- cs_error(link, RequestIO, err);
+ if ((err=pcmcia_request_io(link, &link->io)))
goto config_error;
- }
}
port_found:
if (err)
@@ -905,19 +887,15 @@ xirc2ps_config(struct pcmcia_device * link)
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
- if ((err=pcmcia_request_irq(link, &link->irq))) {
- cs_error(link, RequestIRQ, err);
+ if ((err=pcmcia_request_irq(link, &link->irq)))
goto config_error;
- }
/****************
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping.
*/
- if ((err=pcmcia_request_configuration(link, &link->conf))) {
- cs_error(link, RequestConfiguration, err);
+ if ((err=pcmcia_request_configuration(link, &link->conf)))
goto config_error;
- }
if (local->dingo) {
conf_reg_t reg;
@@ -932,17 +910,13 @@ xirc2ps_config(struct pcmcia_device * link)
reg.Action = CS_WRITE;
reg.Offset = CISREG_IOBASE_0;
reg.Value = link->io.BasePort2 & 0xff;
- if ((err = pcmcia_access_configuration_register(link, ®))) {
- cs_error(link, AccessConfigurationRegister, err);
+ if ((err = pcmcia_access_configuration_register(link, ®)))
goto config_error;
- }
reg.Action = CS_WRITE;
reg.Offset = CISREG_IOBASE_1;
reg.Value = (link->io.BasePort2 >> 8) & 0xff;
- if ((err = pcmcia_access_configuration_register(link, ®))) {
- cs_error(link, AccessConfigurationRegister, err);
+ if ((err = pcmcia_access_configuration_register(link, ®)))
goto config_error;
- }
/* There is no config entry for the Ethernet part which
* is at 0x0800. So we allocate a window into the attribute
@@ -951,17 +925,14 @@ xirc2ps_config(struct pcmcia_device * link)
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
req.Base = req.Size = 0;
req.AccessSpeed = 0;
- if ((err = pcmcia_request_window(&link, &req, &link->win))) {
- cs_error(link, RequestWindow, err);
+ if ((err = pcmcia_request_window(&link, &req, &link->win)))
goto config_error;
- }
+
local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
mem.CardOffset = 0x0;
mem.Page = 0;
- if ((err = pcmcia_map_mem_page(link->win, &mem))) {
- cs_error(link, MapMemPage, err);
+ if ((err = pcmcia_map_mem_page(link->win, &mem)))
goto config_error;
- }
/* Setup the CCRs; there are no infos in the CIS about the Ethernet
* part.
@@ -1053,7 +1024,7 @@ xirc2ps_config(struct pcmcia_device * link)
static void
xirc2ps_release(struct pcmcia_device *link)
{
- DEBUG(0, "release(0x%p)\n", link);
+ dev_dbg(&link->dev, "release\n");
if (link->win) {
struct net_device *dev = link->priv;
@@ -1120,7 +1091,7 @@ xirc2ps_interrupt(int irq, void *dev_id)
PutByte(XIRCREG_CR, 0);
}
- DEBUG(6, "%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
+ pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
saved_page = GetByte(XIRCREG_PR);
/* Read the ISR to see whats the cause for the interrupt.
@@ -1130,7 +1101,7 @@ xirc2ps_interrupt(int irq, void *dev_id)
bytes_rcvd = 0;
loop_entry:
if (int_status == 0xff) { /* card may be ejected */
- DEBUG(3, "%s: interrupt %d for dead card\n", dev->name, irq);
+ pr_debug("%s: interrupt %d for dead card\n", dev->name, irq);
goto leave;
}
eth_status = GetByte(XIRCREG_ESR);
@@ -1143,7 +1114,7 @@ xirc2ps_interrupt(int irq, void *dev_id)
PutByte(XIRCREG40_TXST0, 0);
PutByte(XIRCREG40_TXST1, 0);
- DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
+ pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
dev->name, int_status, eth_status, rx_status, tx_status);
/***** receive section ******/
@@ -1154,14 +1125,14 @@ xirc2ps_interrupt(int irq, void *dev_id)
/* too many bytes received during this int, drop the rest of the
* packets */
dev->stats.rx_dropped++;
- DEBUG(2, "%s: RX drop, too much done\n", dev->name);
+ pr_debug("%s: RX drop, too much done\n", dev->name);
} else if (rsr & PktRxOk) {
struct sk_buff *skb;
pktlen = GetWord(XIRCREG0_RBC);
bytes_rcvd += pktlen;
- DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr, pktlen);
+ pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen);
skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
if (!skb) {
@@ -1229,19 +1200,19 @@ xirc2ps_interrupt(int irq, void *dev_id)
dev->stats.multicast++;
}
} else { /* bad packet */
- DEBUG(5, "rsr=%#02x\n", rsr);
+ pr_debug("rsr=%#02x\n", rsr);
}
if (rsr & PktTooLong) {
dev->stats.rx_frame_errors++;
- DEBUG(3, "%s: Packet too long\n", dev->name);
+ pr_debug("%s: Packet too long\n", dev->name);
}
if (rsr & CRCErr) {
dev->stats.rx_crc_errors++;
- DEBUG(3, "%s: CRC error\n", dev->name);
+ pr_debug("%s: CRC error\n", dev->name);
}
if (rsr & AlignErr) {
dev->stats.rx_fifo_errors++; /* okay ? */
- DEBUG(3, "%s: Alignment error\n", dev->name);
+ pr_debug("%s: Alignment error\n", dev->name);
}
/* clear the received/dropped/error packet */
@@ -1253,7 +1224,7 @@ xirc2ps_interrupt(int irq, void *dev_id)
if (rx_status & 0x10) { /* Receive overrun */
dev->stats.rx_over_errors++;
PutByte(XIRCREG_CR, ClearRxOvrun);
- DEBUG(3, "receive overrun cleared\n");
+ pr_debug("receive overrun cleared\n");
}
/***** transmit section ******/
@@ -1266,13 +1237,13 @@ xirc2ps_interrupt(int irq, void *dev_id)
if (nn < n) /* rollover */
dev->stats.tx_packets += 256 - n;
else if (n == nn) { /* happens sometimes - don't know why */
- DEBUG(0, "PTR not changed?\n");
+ pr_debug("PTR not changed?\n");
} else
dev->stats.tx_packets += lp->last_ptr_value - n;
netif_wake_queue(dev);
}
if (tx_status & 0x0002) { /* Execessive collissions */
- DEBUG(0, "tx restarted due to execssive collissions\n");
+ pr_debug("tx restarted due to execssive collissions\n");
PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
}
if (tx_status & 0x0040)
@@ -1291,14 +1262,14 @@ xirc2ps_interrupt(int irq, void *dev_id)
maxrx_bytes = 2000;
else if (maxrx_bytes > 22000)
maxrx_bytes = 22000;
- DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n",
+ pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
maxrx_bytes, bytes_rcvd, duration);
} else if (!duration && maxrx_bytes < 22000) {
/* now much faster */
maxrx_bytes += 2000;
if (maxrx_bytes > 22000)
maxrx_bytes = 22000;
- DEBUG(1, "set maxrx=%u\n", maxrx_bytes);
+ pr_debug("set maxrx=%u\n", maxrx_bytes);
}
}
@@ -1348,7 +1319,7 @@ do_start_xmit(struct sk_buff *skb, struct net_device *dev)
unsigned freespace;
unsigned pktlen = skb->len;
- DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n",
+ pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
skb, dev, pktlen);
@@ -1374,7 +1345,7 @@ do_start_xmit(struct sk_buff *skb, struct net_device *dev)
freespace &= 0x7fff;
/* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
okay = pktlen +2 < freespace;
- DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n",
+ pr_debug("%s: avail. tx space=%u%s\n",
dev->name, freespace, okay ? " (okay)":" (not enough)");
if (!okay) { /* not enough space */
return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */
@@ -1476,7 +1447,7 @@ do_config(struct net_device *dev, struct ifmap *map)
{
local_info_t *local = netdev_priv(dev);
- DEBUG(0, "do_config(%p)\n", dev);
+ pr_debug("do_config(%p)\n", dev);
if (map->port != 255 && map->port != dev->if_port) {
if (map->port > 4)
return -EINVAL;
@@ -1503,7 +1474,7 @@ do_open(struct net_device *dev)
local_info_t *lp = netdev_priv(dev);
struct pcmcia_device *link = lp->p_dev;
- DEBUG(0, "do_open(%p)\n", dev);
+ dev_dbg(&link->dev, "do_open(%p)\n", dev);
/* Check that the PCMCIA card is still here. */
/* Physical device present signature. */
@@ -1537,7 +1508,7 @@ do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
unsigned int ioaddr = dev->base_addr;
struct mii_ioctl_data *data = if_mii(rq);
- DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
+ pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
dev->name, rq->ifr_ifrn.ifrn_name, cmd,
data->phy_id, data->reg_num, data->val_in, data->val_out);
@@ -1586,7 +1557,7 @@ do_reset(struct net_device *dev, int full)
unsigned int ioaddr = dev->base_addr;
unsigned value;
- DEBUG(0, "%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
+ pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
hardreset(dev);
PutByte(XIRCREG_CR, SoftReset); /* set */
@@ -1624,8 +1595,8 @@ do_reset(struct net_device *dev, int full)
}
msleep(40); /* wait 40 msec to let it complete */
- #ifdef PCMCIA_DEBUG
- if (pc_debug) {
+ #if 0
+ {
SelectPage(0);
value = GetByte(XIRCREG_ESR); /* read the ESR */
printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
@@ -1642,7 +1613,7 @@ do_reset(struct net_device *dev, int full)
value |= DisableLinkPulse;
PutByte(XIRCREG1_ECR, value);
#endif
- DEBUG(0, "%s: ECR is: %#02x\n", dev->name, value);
+ pr_debug("%s: ECR is: %#02x\n", dev->name, value);
SelectPage(0x42);
PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
@@ -1820,7 +1791,7 @@ do_powerdown(struct net_device *dev)
unsigned int ioaddr = dev->base_addr;
- DEBUG(0, "do_powerdown(%p)\n", dev);
+ pr_debug("do_powerdown(%p)\n", dev);
SelectPage(4);
PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
@@ -1834,7 +1805,7 @@ do_stop(struct net_device *dev)
local_info_t *lp = netdev_priv(dev);
struct pcmcia_device *link = lp->p_dev;
- DEBUG(0, "do_stop(%p)\n", dev);
+ dev_dbg(&link->dev, "do_stop(%p)\n", dev);
if (!link)
return -ENODEV;
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH 09/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ray-cs.c)
@ 2009-10-24 19:42 ` Dominik Brodowski
0 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:42 UTC (permalink / raw)
To: linux-pcmcia; +Cc: Dominik Brodowski, linux-wireless, netdev
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/net/wireless/ray_cs.c | 347 ++++++++++++++++++++---------------------
1 files changed, 169 insertions(+), 178 deletions(-)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 88cd58e..28db791 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -71,25 +71,7 @@ typedef u_char mac_addr[ETH_ALEN]; /* Hardware address */
#include "rayctl.h"
#include "ray_cs.h"
-/* All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef RAYLINK_DEBUG
-#define PCMCIA_DEBUG RAYLINK_DEBUG
-#endif
-#ifdef PCMCIA_DEBUG
-static int ray_debug;
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-/* #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); */
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(args);
-#else
-#define DEBUG(n, args...)
-#endif
/** Prototypes based on PCMCIA skeleton driver *******************************/
static int ray_config(struct pcmcia_device *link);
static void ray_release(struct pcmcia_device *link);
@@ -325,7 +307,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
ray_dev_t *local;
struct net_device *dev;
- DEBUG(1, "ray_attach()\n");
+ dev_dbg(&p_dev->dev, "ray_attach()\n");
/* Allocate space for private device-specific data */
dev = alloc_etherdev(sizeof(ray_dev_t));
@@ -357,7 +339,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
local->card_status = CARD_INSERTED;
local->authentication_state = UNAUTHENTICATED;
local->num_multi = 0;
- DEBUG(2, "ray_attach p_dev = %p, dev = %p, local = %p, intr = %p\n",
+ dev_dbg(&p_dev->dev, "ray_attach p_dev = %p, dev = %p, local = %p, intr = %p\n",
p_dev, dev, local, &ray_interrupt);
/* Raylink entries in the device structure */
@@ -370,7 +352,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
#endif /* WIRELESS_SPY */
- DEBUG(2, "ray_cs ray_attach calling ether_setup.)\n");
+ dev_dbg(&p_dev->dev, "ray_cs ray_attach calling ether_setup.)\n");
netif_stop_queue(dev);
init_timer(&local->timer);
@@ -393,7 +375,7 @@ static void ray_detach(struct pcmcia_device *link)
struct net_device *dev;
ray_dev_t *local;
- DEBUG(1, "ray_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_detach\n");
this_device = NULL;
dev = link->priv;
@@ -408,7 +390,7 @@ static void ray_detach(struct pcmcia_device *link)
unregister_netdev(dev);
free_netdev(dev);
}
- DEBUG(2, "ray_cs ray_detach ending\n");
+ dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
} /* ray_detach */
/*=============================================================================
@@ -416,19 +398,17 @@ static void ray_detach(struct pcmcia_device *link)
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
=============================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
#define MAX_TUPLE_SIZE 128
static int ray_config(struct pcmcia_device *link)
{
- int last_fn = 0, last_ret = 0;
+ int ret = 0;
int i;
win_req_t req;
memreq_t mem;
struct net_device *dev = (struct net_device *)link->priv;
ray_dev_t *local = netdev_priv(dev);
- DEBUG(1, "ray_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_config\n");
/* Determine card type and firmware version */
printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n",
@@ -440,14 +420,17 @@ static int ray_config(struct pcmcia_device *link)
/* Now allocate an interrupt line. Note that this does not
actually assign a handler to the interrupt.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
/* This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*** Set up 32k window for shared memory (transmit and control) ************/
req.Attributes =
@@ -455,10 +438,14 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x8000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(&link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x0000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link->win, &mem);
+ if (ret)
+ goto failed;
local->sram = ioremap(req.Base, req.Size);
/*** Set up 16k window for shared memory (receive buffer) ***************/
@@ -467,11 +454,14 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x4000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow,
- pcmcia_request_window(&link, &req, &local->rmem_handle));
+ ret = pcmcia_request_window(&link, &req, &local->rmem_handle);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x8000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->rmem_handle, &mem));
+ ret = pcmcia_map_mem_page(local->rmem_handle, &mem);
+ if (ret)
+ goto failed;
local->rmem = ioremap(req.Base, req.Size);
/*** Set up window for attribute memory ***********************************/
@@ -480,16 +470,19 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x1000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow,
- pcmcia_request_window(&link, &req, &local->amem_handle));
+ ret = pcmcia_request_window(&link, &req, &local->amem_handle);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x0000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->amem_handle, &mem));
+ ret = pcmcia_map_mem_page(local->amem_handle, &mem);
+ if (ret)
+ goto failed;
local->amem = ioremap(req.Base, req.Size);
- DEBUG(3, "ray_config sram=%p\n", local->sram);
- DEBUG(3, "ray_config rmem=%p\n", local->rmem);
- DEBUG(3, "ray_config amem=%p\n", local->amem);
+ dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
+ dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
+ dev_dbg(&link->dev, "ray_config amem=%p\n", local->amem);
if (ray_init(dev) < 0) {
ray_release(link);
return -ENODEV;
@@ -511,9 +504,7 @@ static int ray_config(struct pcmcia_device *link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
-
+failed:
ray_release(link);
return -ENODEV;
} /* ray_config */
@@ -543,9 +534,9 @@ static int ray_init(struct net_device *dev)
struct ccs __iomem *pccs;
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
- DEBUG(1, "ray_init(0x%p)\n", dev);
+ dev_dbg(&link->dev, "ray_init(0x%p)\n", dev);
if (!(pcmcia_dev_present(link))) {
- DEBUG(0, "ray_init - device not present\n");
+ dev_dbg(&link->dev, "ray_init - device not present\n");
return -1;
}
@@ -567,13 +558,13 @@ static int ray_init(struct net_device *dev)
local->fw_ver = local->startup_res.firmware_version[0];
local->fw_bld = local->startup_res.firmware_version[1];
local->fw_var = local->startup_res.firmware_version[2];
- DEBUG(1, "ray_init firmware version %d.%d \n", local->fw_ver,
+ dev_dbg(&link->dev, "ray_init firmware version %d.%d \n", local->fw_ver,
local->fw_bld);
local->tib_length = 0x20;
if ((local->fw_ver == 5) && (local->fw_bld >= 30))
local->tib_length = local->startup_res.tib_length;
- DEBUG(2, "ray_init tib_length = 0x%02x\n", local->tib_length);
+ dev_dbg(&link->dev, "ray_init tib_length = 0x%02x\n", local->tib_length);
/* Initialize CCS's to buffer free state */
pccs = ccs_base(local);
for (i = 0; i < NUMBER_OF_CCS; i++) {
@@ -592,7 +583,7 @@ static int ray_init(struct net_device *dev)
clear_interrupt(local); /* Clear any interrupt from the card */
local->card_status = CARD_AWAITING_PARAM;
- DEBUG(2, "ray_init ending\n");
+ dev_dbg(&link->dev, "ray_init ending\n");
return 0;
} /* ray_init */
@@ -605,9 +596,9 @@ static int dl_startup_params(struct net_device *dev)
struct ccs __iomem *pccs;
struct pcmcia_device *link = local->finder;
- DEBUG(1, "dl_startup_params entered\n");
+ dev_dbg(&link->dev, "dl_startup_params entered\n");
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs dl_startup_params - device not present\n");
+ dev_dbg(&link->dev, "ray_cs dl_startup_params - device not present\n");
return -1;
}
@@ -625,7 +616,7 @@ static int dl_startup_params(struct net_device *dev)
local->dl_param_ccs = ccsindex;
pccs = ccs_base(local) + ccsindex;
writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd);
- DEBUG(2, "dl_startup_params start ccsindex = %d\n",
+ dev_dbg(&link->dev, "dl_startup_params start ccsindex = %d\n",
local->dl_param_ccs);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
@@ -641,7 +632,7 @@ static int dl_startup_params(struct net_device *dev)
local->timer.data = (long)local;
local->timer.function = &verify_dl_startup;
add_timer(&local->timer);
- DEBUG(2,
+ dev_dbg(&link->dev,
"ray_cs dl_startup_params started timer for verify_dl_startup\n");
return 0;
} /* dl_startup_params */
@@ -717,11 +708,11 @@ static void verify_dl_startup(u_long data)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs verify_dl_startup - device not present\n");
+ dev_dbg(&link->dev, "ray_cs verify_dl_startup - device not present\n");
return;
}
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
+#if 0
+ {
int i;
printk(KERN_DEBUG
"verify_dl_startup parameters sent via ccs %d:\n",
@@ -760,7 +751,7 @@ static void start_net(u_long data)
int ccsindex;
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs start_net - device not present\n");
+ dev_dbg(&link->dev, "ray_cs start_net - device not present\n");
return;
}
/* Fill in the CCS fields for the ECF */
@@ -771,7 +762,7 @@ static void start_net(u_long data)
writeb(0, &pccs->var.start_network.update_param);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray start net failed - card not ready for intr\n");
+ dev_dbg(&link->dev, "ray start net failed - card not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return;
}
@@ -790,7 +781,7 @@ static void join_net(u_long data)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs join_net - device not present\n");
+ dev_dbg(&link->dev, "ray_cs join_net - device not present\n");
return;
}
/* Fill in the CCS fields for the ECF */
@@ -802,7 +793,7 @@ static void join_net(u_long data)
writeb(0, &pccs->var.join_network.net_initiated);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray join net failed - card not ready for intr\n");
+ dev_dbg(&link->dev, "ray join net failed - card not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return;
}
@@ -821,7 +812,7 @@ static void ray_release(struct pcmcia_device *link)
ray_dev_t *local = netdev_priv(dev);
int i;
- DEBUG(1, "ray_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_release\n");
del_timer(&local->timer);
@@ -831,13 +822,13 @@ static void ray_release(struct pcmcia_device *link)
/* Do bother checking to see if these succeed or not */
i = pcmcia_release_window(local->amem_handle);
if (i != 0)
- DEBUG(0, "ReleaseWindow(local->amem) ret = %x\n", i);
+ dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
i = pcmcia_release_window(local->rmem_handle);
if (i != 0)
- DEBUG(0, "ReleaseWindow(local->rmem) ret = %x\n", i);
+ dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
pcmcia_disable_device(link);
- DEBUG(2, "ray_release ending\n");
+ dev_dbg(&link->dev, "ray_release ending\n");
}
static int ray_suspend(struct pcmcia_device *link)
@@ -871,9 +862,9 @@ static int ray_dev_init(struct net_device *dev)
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
- DEBUG(1, "ray_dev_init(dev=%p)\n", dev);
+ dev_dbg(&link->dev, "ray_dev_init(dev=%p)\n", dev);
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_dev_init - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_init - device not present\n");
return -1;
}
#ifdef RAY_IMMEDIATE_INIT
@@ -887,7 +878,7 @@ static int ray_dev_init(struct net_device *dev)
/* Postpone the card init so that we can still configure the card,
* for example using the Wireless Extensions. The init will happen
* in ray_open() - Jean II */
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_dev_init: postponing card init to ray_open() ; Status = %d\n",
local->card_status);
#endif /* RAY_IMMEDIATE_INIT */
@@ -896,7 +887,7 @@ static int ray_dev_init(struct net_device *dev)
memcpy(dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
memset(dev->broadcast, 0xff, ETH_ALEN);
- DEBUG(2, "ray_dev_init ending\n");
+ dev_dbg(&link->dev, "ray_dev_init ending\n");
return 0;
}
@@ -906,9 +897,9 @@ static int ray_dev_config(struct net_device *dev, struct ifmap *map)
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
/* Dummy routine to satisfy device structure */
- DEBUG(1, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
+ dev_dbg(&link->dev, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_dev_config - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_config - device not present\n");
return -1;
}
@@ -924,14 +915,14 @@ static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
short length = skb->len;
if (!pcmcia_dev_present(link)) {
- DEBUG(2, "ray_dev_start_xmit - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_start_xmit - device not present\n");
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
- DEBUG(3, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
+ dev_dbg(&link->dev, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
if (local->authentication_state == NEED_TO_AUTH) {
- DEBUG(0, "ray_cs Sending authentication request.\n");
+ dev_dbg(&link->dev, "ray_cs Sending authentication request.\n");
if (!build_auth_frame(local, local->auth_id, OPEN_AUTH_REQUEST)) {
local->authentication_state = AUTHENTICATED;
netif_stop_queue(dev);
@@ -971,7 +962,7 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
struct tx_msg __iomem *ptx; /* Address of xmit buffer in PC space */
short int addr; /* Address of xmit buffer in card space */
- DEBUG(3, "ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
+ pr_debug("ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) {
printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n",
len);
@@ -979,9 +970,9 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
}
switch (ccsindex = get_free_tx_ccs(local)) {
case ECCSBUSY:
- DEBUG(2, "ray_hw_xmit tx_ccs table busy\n");
+ pr_debug("ray_hw_xmit tx_ccs table busy\n");
case ECCSFULL:
- DEBUG(2, "ray_hw_xmit No free tx ccs\n");
+ pr_debug("ray_hw_xmit No free tx ccs\n");
case ECARDGONE:
netif_stop_queue(dev);
return XMIT_NO_CCS;
@@ -1018,12 +1009,12 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
writeb(PSM_CAM, &pccs->var.tx_request.pow_sav_mode);
writeb(local->net_default_tx_rate, &pccs->var.tx_request.tx_rate);
writeb(0, &pccs->var.tx_request.antenna);
- DEBUG(3, "ray_hw_xmit default_tx_rate = 0x%x\n",
+ pr_debug("ray_hw_xmit default_tx_rate = 0x%x\n",
local->net_default_tx_rate);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(2, "ray_hw_xmit failed - ECF not ready for intr\n");
+ pr_debug("ray_hw_xmit failed - ECF not ready for intr\n");
/* TBD very inefficient to copy packet to buffer, and then not
send it, but the alternative is to queue the messages and that
won't be done for a while. Maybe set tbusy until a CCS is free?
@@ -1040,7 +1031,7 @@ static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
{
__be16 proto = ((struct ethhdr *)data)->h_proto;
if (ntohs(proto) >= 1536) { /* DIX II ethernet frame */
- DEBUG(3, "ray_cs translate_frame DIX II\n");
+ pr_debug("ray_cs translate_frame DIX II\n");
/* Copy LLC header to card buffer */
memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc));
memcpy_toio(((void __iomem *)&ptx->var) + sizeof(eth2_llc),
@@ -1056,9 +1047,9 @@ static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
len - ETH_HLEN);
return (int)sizeof(struct snaphdr_t) - ETH_HLEN;
} else { /* already 802 type, and proto is length */
- DEBUG(3, "ray_cs translate_frame 802\n");
+ pr_debug("ray_cs translate_frame 802\n");
if (proto == htons(0xffff)) { /* evil netware IPX 802.3 without LLC */
- DEBUG(3, "ray_cs translate_frame evil IPX\n");
+ pr_debug("ray_cs translate_frame evil IPX\n");
memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN);
return 0 - ETH_HLEN;
}
@@ -1603,7 +1594,7 @@ static int ray_open(struct net_device *dev)
struct pcmcia_device *link;
link = local->finder;
- DEBUG(1, "ray_open('%s')\n", dev->name);
+ dev_dbg(&link->dev, "ray_open('%s')\n", dev->name);
if (link->open == 0)
local->num_multi = 0;
@@ -1613,7 +1604,7 @@ static int ray_open(struct net_device *dev)
if (local->card_status == CARD_AWAITING_PARAM) {
int i;
- DEBUG(1, "ray_open: doing init now !\n");
+ dev_dbg(&link->dev, "ray_open: doing init now !\n");
/* Download startup parameters */
if ((i = dl_startup_params(dev)) < 0) {
@@ -1629,7 +1620,7 @@ static int ray_open(struct net_device *dev)
else
netif_start_queue(dev);
- DEBUG(2, "ray_open ending\n");
+ dev_dbg(&link->dev, "ray_open ending\n");
return 0;
} /* end ray_open */
@@ -1640,7 +1631,7 @@ static int ray_dev_close(struct net_device *dev)
struct pcmcia_device *link;
link = local->finder;
- DEBUG(1, "ray_dev_close('%s')\n", dev->name);
+ dev_dbg(&link->dev, "ray_dev_close('%s')\n", dev->name);
link->open--;
netif_stop_queue(dev);
@@ -1656,7 +1647,7 @@ static int ray_dev_close(struct net_device *dev)
/*===========================================================================*/
static void ray_reset(struct net_device *dev)
{
- DEBUG(1, "ray_reset entered\n");
+ pr_debug("ray_reset entered\n");
return;
}
@@ -1669,17 +1660,17 @@ static int interrupt_ecf(ray_dev_t *local, int ccs)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs interrupt_ecf - device not present\n");
+ dev_dbg(&link->dev, "ray_cs interrupt_ecf - device not present\n");
return -1;
}
- DEBUG(2, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
+ dev_dbg(&link->dev, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
while (i &&
(readb(local->amem + CIS_OFFSET + ECF_INTR_OFFSET) &
ECF_INTR_SET))
i--;
if (i == 0) {
- DEBUG(2, "ray_cs interrupt_ecf card not ready for interrupt\n");
+ dev_dbg(&link->dev, "ray_cs interrupt_ecf card not ready for interrupt\n");
return -1;
}
/* Fill the mailbox, then kick the card */
@@ -1698,12 +1689,12 @@ static int get_free_tx_ccs(ray_dev_t *local)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs get_free_tx_ccs - device not present\n");
+ dev_dbg(&link->dev, "ray_cs get_free_tx_ccs - device not present\n");
return ECARDGONE;
}
if (test_and_set_bit(0, &local->tx_ccs_lock)) {
- DEBUG(1, "ray_cs tx_ccs_lock busy\n");
+ dev_dbg(&link->dev, "ray_cs tx_ccs_lock busy\n");
return ECCSBUSY;
}
@@ -1716,7 +1707,7 @@ static int get_free_tx_ccs(ray_dev_t *local)
}
}
local->tx_ccs_lock = 0;
- DEBUG(2, "ray_cs ERROR no free tx CCS for raylink card\n");
+ dev_dbg(&link->dev, "ray_cs ERROR no free tx CCS for raylink card\n");
return ECCSFULL;
} /* get_free_tx_ccs */
@@ -1730,11 +1721,11 @@ static int get_free_ccs(ray_dev_t *local)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs get_free_ccs - device not present\n");
+ dev_dbg(&link->dev, "ray_cs get_free_ccs - device not present\n");
return ECARDGONE;
}
if (test_and_set_bit(0, &local->ccs_lock)) {
- DEBUG(1, "ray_cs ccs_lock busy\n");
+ dev_dbg(&link->dev, "ray_cs ccs_lock busy\n");
return ECCSBUSY;
}
@@ -1747,7 +1738,7 @@ static int get_free_ccs(ray_dev_t *local)
}
}
local->ccs_lock = 0;
- DEBUG(1, "ray_cs ERROR no free CCS for raylink card\n");
+ dev_dbg(&link->dev, "ray_cs ERROR no free CCS for raylink card\n");
return ECCSFULL;
} /* get_free_ccs */
@@ -1823,7 +1814,7 @@ static struct net_device_stats *ray_get_stats(struct net_device *dev)
struct pcmcia_device *link = local->finder;
struct status __iomem *p = local->sram + STATUS_BASE;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs net_device_stats - device not present\n");
+ dev_dbg(&link->dev, "ray_cs net_device_stats - device not present\n");
return &local->stats;
}
if (readb(&p->mrx_overflow_for_host)) {
@@ -1856,12 +1847,12 @@ static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value,
struct ccs __iomem *pccs;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_update_parm - device not present\n");
+ dev_dbg(&link->dev, "ray_update_parm - device not present\n");
return;
}
if ((ccsindex = get_free_ccs(local)) < 0) {
- DEBUG(0, "ray_update_parm - No free ccs\n");
+ dev_dbg(&link->dev, "ray_update_parm - No free ccs\n");
return;
}
pccs = ccs_base(local) + ccsindex;
@@ -1874,7 +1865,7 @@ static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value,
}
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(0, "ray_cs associate failed - ECF not ready for intr\n");
+ dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
}
}
@@ -1891,12 +1882,12 @@ static void ray_update_multi_list(struct net_device *dev, int all)
void __iomem *p = local->sram + HOST_TO_ECF_BASE;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_update_multi_list - device not present\n");
+ dev_dbg(&link->dev, "ray_update_multi_list - device not present\n");
return;
} else
- DEBUG(2, "ray_update_multi_list(%p)\n", dev);
+ dev_dbg(&link->dev, "ray_update_multi_list(%p)\n", dev);
if ((ccsindex = get_free_ccs(local)) < 0) {
- DEBUG(1, "ray_update_multi - No free ccs\n");
+ dev_dbg(&link->dev, "ray_update_multi - No free ccs\n");
return;
}
pccs = ccs_base(local) + ccsindex;
@@ -1910,7 +1901,7 @@ static void ray_update_multi_list(struct net_device *dev, int all)
for (dmip = &dev->mc_list; (dmi = *dmip) != NULL;
dmip = &dmi->next) {
memcpy_toio(p, dmi->dmi_addr, ETH_ALEN);
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",
dmi->dmi_addr[0], dmi->dmi_addr[1],
dmi->dmi_addr[2], dmi->dmi_addr[3],
@@ -1921,12 +1912,12 @@ static void ray_update_multi_list(struct net_device *dev, int all)
if (i > 256 / ADDRLEN)
i = 256 / ADDRLEN;
writeb((UCHAR) i, &pccs->var);
- DEBUG(1, "ray_cs update_multi %d addresses in list\n", i);
+ dev_dbg(&link->dev, "ray_cs update_multi %d addresses in list\n", i);
/* Interrupt the firmware to process the command */
local->num_multi = i;
}
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs update_multi failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
}
@@ -1938,11 +1929,11 @@ static void set_multicast_list(struct net_device *dev)
ray_dev_t *local = netdev_priv(dev);
UCHAR promisc;
- DEBUG(2, "ray_cs set_multicast_list(%p)\n", dev);
+ pr_debug("ray_cs set_multicast_list(%p)\n", dev);
if (dev->flags & IFF_PROMISC) {
if (local->sparm.b5.a_promiscuous_mode == 0) {
- DEBUG(1, "ray_cs set_multicast_list promisc on\n");
+ pr_debug("ray_cs set_multicast_list promisc on\n");
local->sparm.b5.a_promiscuous_mode = 1;
promisc = 1;
ray_update_parm(dev, OBJID_promiscuous_mode,
@@ -1950,7 +1941,7 @@ static void set_multicast_list(struct net_device *dev)
}
} else {
if (local->sparm.b5.a_promiscuous_mode == 1) {
- DEBUG(1, "ray_cs set_multicast_list promisc off\n");
+ pr_debug("ray_cs set_multicast_list promisc off\n");
local->sparm.b5.a_promiscuous_mode = 0;
promisc = 0;
ray_update_parm(dev, OBJID_promiscuous_mode,
@@ -1984,19 +1975,19 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */
return IRQ_NONE;
- DEBUG(4, "ray_cs: interrupt for *dev=%p\n", dev);
+ pr_debug("ray_cs: interrupt for *dev=%p\n", dev);
local = netdev_priv(dev);
link = (struct pcmcia_device *)local->finder;
if (!pcmcia_dev_present(link)) {
- DEBUG(2,
- "ray_cs interrupt from device not present or suspended.\n");
+ pr_debug(
+ "ray_cs interrupt from device not present or suspended.\n");
return IRQ_NONE;
}
rcsindex = readb(&((struct scb __iomem *)(local->sram))->rcs_index);
if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
- DEBUG(1, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
+ dev_dbg(&link->dev, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
clear_interrupt(local);
return IRQ_HANDLED;
}
@@ -2008,33 +1999,33 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
case CCS_DOWNLOAD_STARTUP_PARAMS: /* Happens in firmware someday */
del_timer(&local->timer);
if (status == CCS_COMMAND_COMPLETE) {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt download_startup_parameters OK\n");
} else {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt download_startup_parameters fail\n");
}
break;
case CCS_UPDATE_PARAMS:
- DEBUG(1, "ray_cs interrupt update params done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt update params done\n");
if (status != CCS_COMMAND_COMPLETE) {
tmp =
readb(&pccs->var.update_param.
failure_cause);
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt update params failed - reason %d\n",
tmp);
}
break;
case CCS_REPORT_PARAMS:
- DEBUG(1, "ray_cs interrupt report params done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt report params done\n");
break;
case CCS_UPDATE_MULTICAST_LIST: /* Note that this CCS isn't returned */
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt CCS Update Multicast List done\n");
break;
case CCS_UPDATE_POWER_SAVINGS_MODE:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt update power save mode done\n");
break;
case CCS_START_NETWORK:
@@ -2043,11 +2034,11 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
if (readb
(&pccs->var.start_network.net_initiated) ==
1) {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" started\n",
local->sparm.b4.a_current_ess_id);
} else {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" joined\n",
local->sparm.b4.a_current_ess_id);
}
@@ -2075,12 +2066,12 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
local->timer.expires = jiffies + HZ * 5;
local->timer.data = (long)local;
if (status == CCS_START_NETWORK) {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" start failed\n",
local->sparm.b4.a_current_ess_id);
local->timer.function = &start_net;
} else {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" join failed\n",
local->sparm.b4.a_current_ess_id);
local->timer.function = &join_net;
@@ -2091,19 +2082,19 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
case CCS_START_ASSOCIATION:
if (status == CCS_COMMAND_COMPLETE) {
local->card_status = CARD_ASSOC_COMPLETE;
- DEBUG(0, "ray_cs association successful\n");
+ dev_dbg(&link->dev, "ray_cs association successful\n");
} else {
- DEBUG(0, "ray_cs association failed,\n");
+ dev_dbg(&link->dev, "ray_cs association failed,\n");
local->card_status = CARD_ASSOC_FAILED;
join_net((u_long) local);
}
break;
case CCS_TX_REQUEST:
if (status == CCS_COMMAND_COMPLETE) {
- DEBUG(3,
+ dev_dbg(&link->dev,
"ray_cs interrupt tx request complete\n");
} else {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt tx request failed\n");
}
if (!sniffer)
@@ -2111,21 +2102,21 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
netif_wake_queue(dev);
break;
case CCS_TEST_MEMORY:
- DEBUG(1, "ray_cs interrupt mem test done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt mem test done\n");
break;
case CCS_SHUTDOWN:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt Unexpected CCS returned - Shutdown\n");
break;
case CCS_DUMP_MEMORY:
- DEBUG(1, "ray_cs interrupt dump memory done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt dump memory done\n");
break;
case CCS_START_TIMER:
- DEBUG(2,
+ dev_dbg(&link->dev,
"ray_cs interrupt DING - raylink timer expired\n");
break;
default:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt Unexpected CCS 0x%x returned 0x%x\n",
rcsindex, cmd);
}
@@ -2139,7 +2130,7 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
ray_rx(dev, local, prcs);
break;
case REJOIN_NET_COMPLETE:
- DEBUG(1, "ray_cs interrupt rejoin net complete\n");
+ dev_dbg(&link->dev, "ray_cs interrupt rejoin net complete\n");
local->card_status = CARD_ACQ_COMPLETE;
/* do we need to clear tx buffers CCS's? */
if (local->sparm.b4.a_network_type == ADHOC) {
@@ -2149,7 +2140,7 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
memcpy_fromio(&local->bss_id,
prcs->var.rejoin_net_complete.
bssid, ADDRLEN);
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs new BSSID = %02x%02x%02x%02x%02x%02x\n",
local->bss_id[0], local->bss_id[1],
local->bss_id[2], local->bss_id[3],
@@ -2159,15 +2150,15 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
}
break;
case ROAMING_INITIATED:
- DEBUG(1, "ray_cs interrupt roaming initiated\n");
+ dev_dbg(&link->dev, "ray_cs interrupt roaming initiated\n");
netif_stop_queue(dev);
local->card_status = CARD_DOING_ACQ;
break;
case JAPAN_CALL_SIGN_RXD:
- DEBUG(1, "ray_cs interrupt japan call sign rx\n");
+ dev_dbg(&link->dev, "ray_cs interrupt japan call sign rx\n");
break;
default:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs Unexpected interrupt for RCS 0x%x cmd = 0x%x\n",
rcsindex,
(unsigned int)readb(&prcs->interrupt_id));
@@ -2186,7 +2177,7 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
int rx_len;
unsigned int pkt_addr;
void __iomem *pmsg;
- DEBUG(4, "ray_rx process rx packet\n");
+ pr_debug("ray_rx process rx packet\n");
/* Calculate address of packet within Rx buffer */
pkt_addr = ((readb(&prcs->var.rx_packet.rx_data_ptr[0]) << 8)
@@ -2199,28 +2190,28 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
pmsg = local->rmem + pkt_addr;
switch (readb(pmsg)) {
case DATA_TYPE:
- DEBUG(4, "ray_rx data type\n");
+ pr_debug("ray_rx data type\n");
rx_data(dev, prcs, pkt_addr, rx_len);
break;
case AUTHENTIC_TYPE:
- DEBUG(4, "ray_rx authentic type\n");
+ pr_debug("ray_rx authentic type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
else
rx_authenticate(local, prcs, pkt_addr, rx_len);
break;
case DEAUTHENTIC_TYPE:
- DEBUG(4, "ray_rx deauth type\n");
+ pr_debug("ray_rx deauth type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
else
rx_deauthenticate(local, prcs, pkt_addr, rx_len);
break;
case NULL_MSG_TYPE:
- DEBUG(3, "ray_cs rx NULL msg\n");
+ pr_debug("ray_cs rx NULL msg\n");
break;
case BEACON_TYPE:
- DEBUG(4, "ray_rx beacon type\n");
+ pr_debug("ray_rx beacon type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
@@ -2233,7 +2224,7 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
ray_get_stats(dev);
break;
default:
- DEBUG(0, "ray_cs unknown pkt type %2x\n",
+ pr_debug("ray_cs unknown pkt type %2x\n",
(unsigned int)readb(pmsg));
break;
}
@@ -2262,7 +2253,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
rx_len >
(dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
FCS_LEN)) {
- DEBUG(0,
+ pr_debug(
"ray_cs invalid packet length %d received \n",
rx_len);
return;
@@ -2273,17 +2264,17 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
rx_len >
(dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
FCS_LEN)) {
- DEBUG(0,
+ pr_debug(
"ray_cs invalid packet length %d received \n",
rx_len);
return;
}
}
}
- DEBUG(4, "ray_cs rx_data packet\n");
+ pr_debug("ray_cs rx_data packet\n");
/* If fragmented packet, verify sizes of fragments add up */
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
- DEBUG(1, "ray_cs rx'ed fragment\n");
+ pr_debug("ray_cs rx'ed fragment\n");
tmp = (readb(&prcs->var.rx_packet.totalpacketlength[0]) << 8)
+ readb(&prcs->var.rx_packet.totalpacketlength[1]);
total_len = tmp;
@@ -2301,7 +2292,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
} while (1);
if (tmp < 0) {
- DEBUG(0,
+ pr_debug(
"ray_cs rx_data fragment lengths don't add up\n");
local->stats.rx_dropped++;
release_frag_chain(local, prcs);
@@ -2313,7 +2304,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
skb = dev_alloc_skb(total_len + 5);
if (skb == NULL) {
- DEBUG(0, "ray_cs rx_data could not allocate skb\n");
+ pr_debug("ray_cs rx_data could not allocate skb\n");
local->stats.rx_dropped++;
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF)
release_frag_chain(local, prcs);
@@ -2321,7 +2312,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
}
skb_reserve(skb, 2); /* Align IP on 16 byte (TBD check this) */
- DEBUG(4, "ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
+ pr_debug("ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
rx_len);
/************************/
@@ -2354,7 +2345,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
tmp = 17;
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
prcslink = prcs;
- DEBUG(1, "ray_cs rx_data in fragment loop\n");
+ pr_debug("ray_cs rx_data in fragment loop\n");
do {
prcslink = rcs_base(local)
+
@@ -2426,8 +2417,8 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
memcpy(destaddr, ieee80211_get_DA(pmac), ADDRLEN);
memcpy(srcaddr, ieee80211_get_SA(pmac), ADDRLEN);
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 3) {
+#if 0
+ if {
print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
DUMP_PREFIX_NONE, 16, 1,
skb->data, 64, true);
@@ -2441,7 +2432,7 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
if (psnap->dsap != 0xaa || psnap->ssap != 0xaa || psnap->ctrl != 3) {
/* not a snap type so leave it alone */
- DEBUG(3, "ray_cs untranslate NOT SNAP %02x %02x %02x\n",
+ pr_debug("ray_cs untranslate NOT SNAP %02x %02x %02x\n",
psnap->dsap, psnap->ssap, psnap->ctrl);
delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
@@ -2450,7 +2441,7 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
} else { /* Its a SNAP */
if (memcmp(psnap->org, org_bridge, 3) == 0) {
/* EtherII and nuke the LLC */
- DEBUG(3, "ray_cs untranslate Bridge encap\n");
+ pr_debug("ray_cs untranslate Bridge encap\n");
delta = RX_MAC_HEADER_LENGTH
+ sizeof(struct snaphdr_t) - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
@@ -2459,14 +2450,14 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
switch (ntohs(type)) {
case ETH_P_IPX:
case ETH_P_AARP:
- DEBUG(3, "ray_cs untranslate RFC IPX/AARP\n");
+ pr_debug("ray_cs untranslate RFC IPX/AARP\n");
delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
peth->h_proto =
htons(len - RX_MAC_HEADER_LENGTH);
break;
default:
- DEBUG(3, "ray_cs untranslate RFC default\n");
+ pr_debug("ray_cs untranslate RFC default\n");
delta = RX_MAC_HEADER_LENGTH +
sizeof(struct snaphdr_t) - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
@@ -2482,12 +2473,12 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
}
/* TBD reserve skb_reserve(skb, delta); */
skb_pull(skb, delta);
- DEBUG(3, "untranslate after skb_pull(%d), skb->data = %p\n", delta,
+ pr_debug("untranslate after skb_pull(%d), skb->data = %p\n", delta,
skb->data);
memcpy(peth->h_dest, destaddr, ADDRLEN);
memcpy(peth->h_source, srcaddr, ADDRLEN);
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 3) {
+#if 0
+ {
int i;
printk(KERN_DEBUG "skb->data after untranslate:");
for (i = 0; i < 64; i++)
@@ -2529,7 +2520,7 @@ static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs)
while (tmp--) {
writeb(CCS_BUFFER_FREE, &prcslink->buffer_status);
if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
- DEBUG(1, "ray_cs interrupt bad rcsindex = 0x%x\n",
+ pr_debug("ray_cs interrupt bad rcsindex = 0x%x\n",
rcsindex);
break;
}
@@ -2543,9 +2534,9 @@ static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs)
static void authenticate(ray_dev_t *local)
{
struct pcmcia_device *link = local->finder;
- DEBUG(0, "ray_cs Starting authentication.\n");
+ dev_dbg(&link->dev, "ray_cs Starting authentication.\n");
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs authenticate - device not present\n");
+ dev_dbg(&link->dev, "ray_cs authenticate - device not present\n");
return;
}
@@ -2573,11 +2564,11 @@ static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
/* if we are trying to get authenticated */
if (local->sparm.b4.a_network_type == ADHOC) {
- DEBUG(1, "ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
+ pr_debug("ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
msg->var[0], msg->var[1], msg->var[2], msg->var[3],
msg->var[4], msg->var[5]);
if (msg->var[2] == 1) {
- DEBUG(0, "ray_cs Sending authentication response.\n");
+ pr_debug("ray_cs Sending authentication response.\n");
if (!build_auth_frame
(local, msg->mac.addr_2, OPEN_AUTH_RESPONSE)) {
local->authentication_state = NEED_TO_AUTH;
@@ -2591,13 +2582,13 @@ static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
/* Verify authentication sequence #2 and success */
if (msg->var[2] == 2) {
if ((msg->var[3] | msg->var[4]) == 0) {
- DEBUG(1, "Authentication successful\n");
+ pr_debug("Authentication successful\n");
local->card_status = CARD_AUTH_COMPLETE;
associate(local);
local->authentication_state =
AUTHENTICATED;
} else {
- DEBUG(0, "Authentication refused\n");
+ pr_debug("Authentication refused\n");
local->card_status = CARD_AUTH_REFUSED;
join_net((u_long) local);
local->authentication_state =
@@ -2617,22 +2608,22 @@ static void associate(ray_dev_t *local)
struct net_device *dev = link->priv;
int ccsindex;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs associate - device not present\n");
+ dev_dbg(&link->dev, "ray_cs associate - device not present\n");
return;
}
/* If no tx buffers available, return */
if ((ccsindex = get_free_ccs(local)) < 0) {
/* TBD should never be here but... what if we are? */
- DEBUG(1, "ray_cs associate - No free ccs\n");
+ dev_dbg(&link->dev, "ray_cs associate - No free ccs\n");
return;
}
- DEBUG(1, "ray_cs Starting association with access point\n");
+ dev_dbg(&link->dev, "ray_cs Starting association with access point\n");
pccs = ccs_base(local) + ccsindex;
/* fill in the CCS */
writeb(CCS_START_ASSOCIATION, &pccs->cmd);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray_cs associate failed - ECF not ready for intr\n");
+ dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
del_timer(&local->timer);
@@ -2655,7 +2646,7 @@ static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
/* UCHAR buff[256];
struct rx_msg *msg = (struct rx_msg *)buff;
*/
- DEBUG(0, "Deauthentication frame received\n");
+ pr_debug("Deauthentication frame received\n");
local->authentication_state = UNAUTHENTICATED;
/* Need to reauthenticate or rejoin depending on reason code */
/* copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
@@ -2823,7 +2814,7 @@ static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type)
/* If no tx buffers available, return */
if ((ccsindex = get_free_tx_ccs(local)) < 0) {
- DEBUG(1, "ray_cs send authenticate - No free tx ccs\n");
+ pr_debug("ray_cs send authenticate - No free tx ccs\n");
return -1;
}
@@ -2855,7 +2846,7 @@ static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type)
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1,
+ pr_debug(
"ray_cs send authentication request failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return -1;
@@ -2942,9 +2933,9 @@ static int __init init_ray_cs(void)
{
int rc;
- DEBUG(1, "%s\n", rcsid);
+ pr_debug("%s\n", rcsid);
rc = pcmcia_register_driver(&ray_driver);
- DEBUG(1, "raylink init_module register_pcmcia_driver returns 0x%x\n",
+ pr_debug("raylink init_module register_pcmcia_driver returns 0x%x\n",
rc);
#ifdef CONFIG_PROC_FS
@@ -2964,7 +2955,7 @@ static int __init init_ray_cs(void)
static void __exit exit_ray_cs(void)
{
- DEBUG(0, "ray_cs: cleanup_module\n");
+ pr_debug("ray_cs: cleanup_module\n");
#ifdef CONFIG_PROC_FS
remove_proc_entry("driver/ray_cs/ray_cs", NULL);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH 09/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ray-cs.c)
@ 2009-10-24 19:42 ` Dominik Brodowski
0 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:42 UTC (permalink / raw)
To: linux-pcmcia-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Dominik Brodowski, linux-wireless-u79uwXL29TY76Z2rM5mHXA,
netdev-u79uwXL29TY76Z2rM5mHXA
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Dominik Brodowski <linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org>
---
drivers/net/wireless/ray_cs.c | 347 ++++++++++++++++++++---------------------
1 files changed, 169 insertions(+), 178 deletions(-)
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 88cd58e..28db791 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -71,25 +71,7 @@ typedef u_char mac_addr[ETH_ALEN]; /* Hardware address */
#include "rayctl.h"
#include "ray_cs.h"
-/* All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef RAYLINK_DEBUG
-#define PCMCIA_DEBUG RAYLINK_DEBUG
-#endif
-#ifdef PCMCIA_DEBUG
-static int ray_debug;
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-/* #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); */
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(args);
-#else
-#define DEBUG(n, args...)
-#endif
/** Prototypes based on PCMCIA skeleton driver *******************************/
static int ray_config(struct pcmcia_device *link);
static void ray_release(struct pcmcia_device *link);
@@ -325,7 +307,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
ray_dev_t *local;
struct net_device *dev;
- DEBUG(1, "ray_attach()\n");
+ dev_dbg(&p_dev->dev, "ray_attach()\n");
/* Allocate space for private device-specific data */
dev = alloc_etherdev(sizeof(ray_dev_t));
@@ -357,7 +339,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
local->card_status = CARD_INSERTED;
local->authentication_state = UNAUTHENTICATED;
local->num_multi = 0;
- DEBUG(2, "ray_attach p_dev = %p, dev = %p, local = %p, intr = %p\n",
+ dev_dbg(&p_dev->dev, "ray_attach p_dev = %p, dev = %p, local = %p, intr = %p\n",
p_dev, dev, local, &ray_interrupt);
/* Raylink entries in the device structure */
@@ -370,7 +352,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
#endif /* WIRELESS_SPY */
- DEBUG(2, "ray_cs ray_attach calling ether_setup.)\n");
+ dev_dbg(&p_dev->dev, "ray_cs ray_attach calling ether_setup.)\n");
netif_stop_queue(dev);
init_timer(&local->timer);
@@ -393,7 +375,7 @@ static void ray_detach(struct pcmcia_device *link)
struct net_device *dev;
ray_dev_t *local;
- DEBUG(1, "ray_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_detach\n");
this_device = NULL;
dev = link->priv;
@@ -408,7 +390,7 @@ static void ray_detach(struct pcmcia_device *link)
unregister_netdev(dev);
free_netdev(dev);
}
- DEBUG(2, "ray_cs ray_detach ending\n");
+ dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
} /* ray_detach */
/*=============================================================================
@@ -416,19 +398,17 @@ static void ray_detach(struct pcmcia_device *link)
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
=============================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
#define MAX_TUPLE_SIZE 128
static int ray_config(struct pcmcia_device *link)
{
- int last_fn = 0, last_ret = 0;
+ int ret = 0;
int i;
win_req_t req;
memreq_t mem;
struct net_device *dev = (struct net_device *)link->priv;
ray_dev_t *local = netdev_priv(dev);
- DEBUG(1, "ray_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_config\n");
/* Determine card type and firmware version */
printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n",
@@ -440,14 +420,17 @@ static int ray_config(struct pcmcia_device *link)
/* Now allocate an interrupt line. Note that this does not
actually assign a handler to the interrupt.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
/* This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*** Set up 32k window for shared memory (transmit and control) ************/
req.Attributes =
@@ -455,10 +438,14 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x8000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(&link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x0000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link->win, &mem);
+ if (ret)
+ goto failed;
local->sram = ioremap(req.Base, req.Size);
/*** Set up 16k window for shared memory (receive buffer) ***************/
@@ -467,11 +454,14 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x4000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow,
- pcmcia_request_window(&link, &req, &local->rmem_handle));
+ ret = pcmcia_request_window(&link, &req, &local->rmem_handle);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x8000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->rmem_handle, &mem));
+ ret = pcmcia_map_mem_page(local->rmem_handle, &mem);
+ if (ret)
+ goto failed;
local->rmem = ioremap(req.Base, req.Size);
/*** Set up window for attribute memory ***********************************/
@@ -480,16 +470,19 @@ static int ray_config(struct pcmcia_device *link)
req.Base = 0;
req.Size = 0x1000;
req.AccessSpeed = ray_mem_speed;
- CS_CHECK(RequestWindow,
- pcmcia_request_window(&link, &req, &local->amem_handle));
+ ret = pcmcia_request_window(&link, &req, &local->amem_handle);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x0000;
mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->amem_handle, &mem));
+ ret = pcmcia_map_mem_page(local->amem_handle, &mem);
+ if (ret)
+ goto failed;
local->amem = ioremap(req.Base, req.Size);
- DEBUG(3, "ray_config sram=%p\n", local->sram);
- DEBUG(3, "ray_config rmem=%p\n", local->rmem);
- DEBUG(3, "ray_config amem=%p\n", local->amem);
+ dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
+ dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
+ dev_dbg(&link->dev, "ray_config amem=%p\n", local->amem);
if (ray_init(dev) < 0) {
ray_release(link);
return -ENODEV;
@@ -511,9 +504,7 @@ static int ray_config(struct pcmcia_device *link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
-
+failed:
ray_release(link);
return -ENODEV;
} /* ray_config */
@@ -543,9 +534,9 @@ static int ray_init(struct net_device *dev)
struct ccs __iomem *pccs;
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
- DEBUG(1, "ray_init(0x%p)\n", dev);
+ dev_dbg(&link->dev, "ray_init(0x%p)\n", dev);
if (!(pcmcia_dev_present(link))) {
- DEBUG(0, "ray_init - device not present\n");
+ dev_dbg(&link->dev, "ray_init - device not present\n");
return -1;
}
@@ -567,13 +558,13 @@ static int ray_init(struct net_device *dev)
local->fw_ver = local->startup_res.firmware_version[0];
local->fw_bld = local->startup_res.firmware_version[1];
local->fw_var = local->startup_res.firmware_version[2];
- DEBUG(1, "ray_init firmware version %d.%d \n", local->fw_ver,
+ dev_dbg(&link->dev, "ray_init firmware version %d.%d \n", local->fw_ver,
local->fw_bld);
local->tib_length = 0x20;
if ((local->fw_ver == 5) && (local->fw_bld >= 30))
local->tib_length = local->startup_res.tib_length;
- DEBUG(2, "ray_init tib_length = 0x%02x\n", local->tib_length);
+ dev_dbg(&link->dev, "ray_init tib_length = 0x%02x\n", local->tib_length);
/* Initialize CCS's to buffer free state */
pccs = ccs_base(local);
for (i = 0; i < NUMBER_OF_CCS; i++) {
@@ -592,7 +583,7 @@ static int ray_init(struct net_device *dev)
clear_interrupt(local); /* Clear any interrupt from the card */
local->card_status = CARD_AWAITING_PARAM;
- DEBUG(2, "ray_init ending\n");
+ dev_dbg(&link->dev, "ray_init ending\n");
return 0;
} /* ray_init */
@@ -605,9 +596,9 @@ static int dl_startup_params(struct net_device *dev)
struct ccs __iomem *pccs;
struct pcmcia_device *link = local->finder;
- DEBUG(1, "dl_startup_params entered\n");
+ dev_dbg(&link->dev, "dl_startup_params entered\n");
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs dl_startup_params - device not present\n");
+ dev_dbg(&link->dev, "ray_cs dl_startup_params - device not present\n");
return -1;
}
@@ -625,7 +616,7 @@ static int dl_startup_params(struct net_device *dev)
local->dl_param_ccs = ccsindex;
pccs = ccs_base(local) + ccsindex;
writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd);
- DEBUG(2, "dl_startup_params start ccsindex = %d\n",
+ dev_dbg(&link->dev, "dl_startup_params start ccsindex = %d\n",
local->dl_param_ccs);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
@@ -641,7 +632,7 @@ static int dl_startup_params(struct net_device *dev)
local->timer.data = (long)local;
local->timer.function = &verify_dl_startup;
add_timer(&local->timer);
- DEBUG(2,
+ dev_dbg(&link->dev,
"ray_cs dl_startup_params started timer for verify_dl_startup\n");
return 0;
} /* dl_startup_params */
@@ -717,11 +708,11 @@ static void verify_dl_startup(u_long data)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs verify_dl_startup - device not present\n");
+ dev_dbg(&link->dev, "ray_cs verify_dl_startup - device not present\n");
return;
}
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
+#if 0
+ {
int i;
printk(KERN_DEBUG
"verify_dl_startup parameters sent via ccs %d:\n",
@@ -760,7 +751,7 @@ static void start_net(u_long data)
int ccsindex;
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs start_net - device not present\n");
+ dev_dbg(&link->dev, "ray_cs start_net - device not present\n");
return;
}
/* Fill in the CCS fields for the ECF */
@@ -771,7 +762,7 @@ static void start_net(u_long data)
writeb(0, &pccs->var.start_network.update_param);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray start net failed - card not ready for intr\n");
+ dev_dbg(&link->dev, "ray start net failed - card not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return;
}
@@ -790,7 +781,7 @@ static void join_net(u_long data)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs join_net - device not present\n");
+ dev_dbg(&link->dev, "ray_cs join_net - device not present\n");
return;
}
/* Fill in the CCS fields for the ECF */
@@ -802,7 +793,7 @@ static void join_net(u_long data)
writeb(0, &pccs->var.join_network.net_initiated);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray join net failed - card not ready for intr\n");
+ dev_dbg(&link->dev, "ray join net failed - card not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return;
}
@@ -821,7 +812,7 @@ static void ray_release(struct pcmcia_device *link)
ray_dev_t *local = netdev_priv(dev);
int i;
- DEBUG(1, "ray_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "ray_release\n");
del_timer(&local->timer);
@@ -831,13 +822,13 @@ static void ray_release(struct pcmcia_device *link)
/* Do bother checking to see if these succeed or not */
i = pcmcia_release_window(local->amem_handle);
if (i != 0)
- DEBUG(0, "ReleaseWindow(local->amem) ret = %x\n", i);
+ dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
i = pcmcia_release_window(local->rmem_handle);
if (i != 0)
- DEBUG(0, "ReleaseWindow(local->rmem) ret = %x\n", i);
+ dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
pcmcia_disable_device(link);
- DEBUG(2, "ray_release ending\n");
+ dev_dbg(&link->dev, "ray_release ending\n");
}
static int ray_suspend(struct pcmcia_device *link)
@@ -871,9 +862,9 @@ static int ray_dev_init(struct net_device *dev)
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
- DEBUG(1, "ray_dev_init(dev=%p)\n", dev);
+ dev_dbg(&link->dev, "ray_dev_init(dev=%p)\n", dev);
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_dev_init - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_init - device not present\n");
return -1;
}
#ifdef RAY_IMMEDIATE_INIT
@@ -887,7 +878,7 @@ static int ray_dev_init(struct net_device *dev)
/* Postpone the card init so that we can still configure the card,
* for example using the Wireless Extensions. The init will happen
* in ray_open() - Jean II */
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_dev_init: postponing card init to ray_open() ; Status = %d\n",
local->card_status);
#endif /* RAY_IMMEDIATE_INIT */
@@ -896,7 +887,7 @@ static int ray_dev_init(struct net_device *dev)
memcpy(dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
memset(dev->broadcast, 0xff, ETH_ALEN);
- DEBUG(2, "ray_dev_init ending\n");
+ dev_dbg(&link->dev, "ray_dev_init ending\n");
return 0;
}
@@ -906,9 +897,9 @@ static int ray_dev_config(struct net_device *dev, struct ifmap *map)
ray_dev_t *local = netdev_priv(dev);
struct pcmcia_device *link = local->finder;
/* Dummy routine to satisfy device structure */
- DEBUG(1, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
+ dev_dbg(&link->dev, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_dev_config - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_config - device not present\n");
return -1;
}
@@ -924,14 +915,14 @@ static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
short length = skb->len;
if (!pcmcia_dev_present(link)) {
- DEBUG(2, "ray_dev_start_xmit - device not present\n");
+ dev_dbg(&link->dev, "ray_dev_start_xmit - device not present\n");
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
- DEBUG(3, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
+ dev_dbg(&link->dev, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
if (local->authentication_state == NEED_TO_AUTH) {
- DEBUG(0, "ray_cs Sending authentication request.\n");
+ dev_dbg(&link->dev, "ray_cs Sending authentication request.\n");
if (!build_auth_frame(local, local->auth_id, OPEN_AUTH_REQUEST)) {
local->authentication_state = AUTHENTICATED;
netif_stop_queue(dev);
@@ -971,7 +962,7 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
struct tx_msg __iomem *ptx; /* Address of xmit buffer in PC space */
short int addr; /* Address of xmit buffer in card space */
- DEBUG(3, "ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
+ pr_debug("ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) {
printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n",
len);
@@ -979,9 +970,9 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
}
switch (ccsindex = get_free_tx_ccs(local)) {
case ECCSBUSY:
- DEBUG(2, "ray_hw_xmit tx_ccs table busy\n");
+ pr_debug("ray_hw_xmit tx_ccs table busy\n");
case ECCSFULL:
- DEBUG(2, "ray_hw_xmit No free tx ccs\n");
+ pr_debug("ray_hw_xmit No free tx ccs\n");
case ECARDGONE:
netif_stop_queue(dev);
return XMIT_NO_CCS;
@@ -1018,12 +1009,12 @@ static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
writeb(PSM_CAM, &pccs->var.tx_request.pow_sav_mode);
writeb(local->net_default_tx_rate, &pccs->var.tx_request.tx_rate);
writeb(0, &pccs->var.tx_request.antenna);
- DEBUG(3, "ray_hw_xmit default_tx_rate = 0x%x\n",
+ pr_debug("ray_hw_xmit default_tx_rate = 0x%x\n",
local->net_default_tx_rate);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(2, "ray_hw_xmit failed - ECF not ready for intr\n");
+ pr_debug("ray_hw_xmit failed - ECF not ready for intr\n");
/* TBD very inefficient to copy packet to buffer, and then not
send it, but the alternative is to queue the messages and that
won't be done for a while. Maybe set tbusy until a CCS is free?
@@ -1040,7 +1031,7 @@ static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
{
__be16 proto = ((struct ethhdr *)data)->h_proto;
if (ntohs(proto) >= 1536) { /* DIX II ethernet frame */
- DEBUG(3, "ray_cs translate_frame DIX II\n");
+ pr_debug("ray_cs translate_frame DIX II\n");
/* Copy LLC header to card buffer */
memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc));
memcpy_toio(((void __iomem *)&ptx->var) + sizeof(eth2_llc),
@@ -1056,9 +1047,9 @@ static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
len - ETH_HLEN);
return (int)sizeof(struct snaphdr_t) - ETH_HLEN;
} else { /* already 802 type, and proto is length */
- DEBUG(3, "ray_cs translate_frame 802\n");
+ pr_debug("ray_cs translate_frame 802\n");
if (proto == htons(0xffff)) { /* evil netware IPX 802.3 without LLC */
- DEBUG(3, "ray_cs translate_frame evil IPX\n");
+ pr_debug("ray_cs translate_frame evil IPX\n");
memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN);
return 0 - ETH_HLEN;
}
@@ -1603,7 +1594,7 @@ static int ray_open(struct net_device *dev)
struct pcmcia_device *link;
link = local->finder;
- DEBUG(1, "ray_open('%s')\n", dev->name);
+ dev_dbg(&link->dev, "ray_open('%s')\n", dev->name);
if (link->open == 0)
local->num_multi = 0;
@@ -1613,7 +1604,7 @@ static int ray_open(struct net_device *dev)
if (local->card_status == CARD_AWAITING_PARAM) {
int i;
- DEBUG(1, "ray_open: doing init now !\n");
+ dev_dbg(&link->dev, "ray_open: doing init now !\n");
/* Download startup parameters */
if ((i = dl_startup_params(dev)) < 0) {
@@ -1629,7 +1620,7 @@ static int ray_open(struct net_device *dev)
else
netif_start_queue(dev);
- DEBUG(2, "ray_open ending\n");
+ dev_dbg(&link->dev, "ray_open ending\n");
return 0;
} /* end ray_open */
@@ -1640,7 +1631,7 @@ static int ray_dev_close(struct net_device *dev)
struct pcmcia_device *link;
link = local->finder;
- DEBUG(1, "ray_dev_close('%s')\n", dev->name);
+ dev_dbg(&link->dev, "ray_dev_close('%s')\n", dev->name);
link->open--;
netif_stop_queue(dev);
@@ -1656,7 +1647,7 @@ static int ray_dev_close(struct net_device *dev)
/*===========================================================================*/
static void ray_reset(struct net_device *dev)
{
- DEBUG(1, "ray_reset entered\n");
+ pr_debug("ray_reset entered\n");
return;
}
@@ -1669,17 +1660,17 @@ static int interrupt_ecf(ray_dev_t *local, int ccs)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs interrupt_ecf - device not present\n");
+ dev_dbg(&link->dev, "ray_cs interrupt_ecf - device not present\n");
return -1;
}
- DEBUG(2, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
+ dev_dbg(&link->dev, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
while (i &&
(readb(local->amem + CIS_OFFSET + ECF_INTR_OFFSET) &
ECF_INTR_SET))
i--;
if (i == 0) {
- DEBUG(2, "ray_cs interrupt_ecf card not ready for interrupt\n");
+ dev_dbg(&link->dev, "ray_cs interrupt_ecf card not ready for interrupt\n");
return -1;
}
/* Fill the mailbox, then kick the card */
@@ -1698,12 +1689,12 @@ static int get_free_tx_ccs(ray_dev_t *local)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs get_free_tx_ccs - device not present\n");
+ dev_dbg(&link->dev, "ray_cs get_free_tx_ccs - device not present\n");
return ECARDGONE;
}
if (test_and_set_bit(0, &local->tx_ccs_lock)) {
- DEBUG(1, "ray_cs tx_ccs_lock busy\n");
+ dev_dbg(&link->dev, "ray_cs tx_ccs_lock busy\n");
return ECCSBUSY;
}
@@ -1716,7 +1707,7 @@ static int get_free_tx_ccs(ray_dev_t *local)
}
}
local->tx_ccs_lock = 0;
- DEBUG(2, "ray_cs ERROR no free tx CCS for raylink card\n");
+ dev_dbg(&link->dev, "ray_cs ERROR no free tx CCS for raylink card\n");
return ECCSFULL;
} /* get_free_tx_ccs */
@@ -1730,11 +1721,11 @@ static int get_free_ccs(ray_dev_t *local)
struct pcmcia_device *link = local->finder;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs get_free_ccs - device not present\n");
+ dev_dbg(&link->dev, "ray_cs get_free_ccs - device not present\n");
return ECARDGONE;
}
if (test_and_set_bit(0, &local->ccs_lock)) {
- DEBUG(1, "ray_cs ccs_lock busy\n");
+ dev_dbg(&link->dev, "ray_cs ccs_lock busy\n");
return ECCSBUSY;
}
@@ -1747,7 +1738,7 @@ static int get_free_ccs(ray_dev_t *local)
}
}
local->ccs_lock = 0;
- DEBUG(1, "ray_cs ERROR no free CCS for raylink card\n");
+ dev_dbg(&link->dev, "ray_cs ERROR no free CCS for raylink card\n");
return ECCSFULL;
} /* get_free_ccs */
@@ -1823,7 +1814,7 @@ static struct net_device_stats *ray_get_stats(struct net_device *dev)
struct pcmcia_device *link = local->finder;
struct status __iomem *p = local->sram + STATUS_BASE;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs net_device_stats - device not present\n");
+ dev_dbg(&link->dev, "ray_cs net_device_stats - device not present\n");
return &local->stats;
}
if (readb(&p->mrx_overflow_for_host)) {
@@ -1856,12 +1847,12 @@ static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value,
struct ccs __iomem *pccs;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_update_parm - device not present\n");
+ dev_dbg(&link->dev, "ray_update_parm - device not present\n");
return;
}
if ((ccsindex = get_free_ccs(local)) < 0) {
- DEBUG(0, "ray_update_parm - No free ccs\n");
+ dev_dbg(&link->dev, "ray_update_parm - No free ccs\n");
return;
}
pccs = ccs_base(local) + ccsindex;
@@ -1874,7 +1865,7 @@ static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value,
}
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(0, "ray_cs associate failed - ECF not ready for intr\n");
+ dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
}
}
@@ -1891,12 +1882,12 @@ static void ray_update_multi_list(struct net_device *dev, int all)
void __iomem *p = local->sram + HOST_TO_ECF_BASE;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_update_multi_list - device not present\n");
+ dev_dbg(&link->dev, "ray_update_multi_list - device not present\n");
return;
} else
- DEBUG(2, "ray_update_multi_list(%p)\n", dev);
+ dev_dbg(&link->dev, "ray_update_multi_list(%p)\n", dev);
if ((ccsindex = get_free_ccs(local)) < 0) {
- DEBUG(1, "ray_update_multi - No free ccs\n");
+ dev_dbg(&link->dev, "ray_update_multi - No free ccs\n");
return;
}
pccs = ccs_base(local) + ccsindex;
@@ -1910,7 +1901,7 @@ static void ray_update_multi_list(struct net_device *dev, int all)
for (dmip = &dev->mc_list; (dmi = *dmip) != NULL;
dmip = &dmi->next) {
memcpy_toio(p, dmi->dmi_addr, ETH_ALEN);
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",
dmi->dmi_addr[0], dmi->dmi_addr[1],
dmi->dmi_addr[2], dmi->dmi_addr[3],
@@ -1921,12 +1912,12 @@ static void ray_update_multi_list(struct net_device *dev, int all)
if (i > 256 / ADDRLEN)
i = 256 / ADDRLEN;
writeb((UCHAR) i, &pccs->var);
- DEBUG(1, "ray_cs update_multi %d addresses in list\n", i);
+ dev_dbg(&link->dev, "ray_cs update_multi %d addresses in list\n", i);
/* Interrupt the firmware to process the command */
local->num_multi = i;
}
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs update_multi failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
}
@@ -1938,11 +1929,11 @@ static void set_multicast_list(struct net_device *dev)
ray_dev_t *local = netdev_priv(dev);
UCHAR promisc;
- DEBUG(2, "ray_cs set_multicast_list(%p)\n", dev);
+ pr_debug("ray_cs set_multicast_list(%p)\n", dev);
if (dev->flags & IFF_PROMISC) {
if (local->sparm.b5.a_promiscuous_mode == 0) {
- DEBUG(1, "ray_cs set_multicast_list promisc on\n");
+ pr_debug("ray_cs set_multicast_list promisc on\n");
local->sparm.b5.a_promiscuous_mode = 1;
promisc = 1;
ray_update_parm(dev, OBJID_promiscuous_mode,
@@ -1950,7 +1941,7 @@ static void set_multicast_list(struct net_device *dev)
}
} else {
if (local->sparm.b5.a_promiscuous_mode == 1) {
- DEBUG(1, "ray_cs set_multicast_list promisc off\n");
+ pr_debug("ray_cs set_multicast_list promisc off\n");
local->sparm.b5.a_promiscuous_mode = 0;
promisc = 0;
ray_update_parm(dev, OBJID_promiscuous_mode,
@@ -1984,19 +1975,19 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */
return IRQ_NONE;
- DEBUG(4, "ray_cs: interrupt for *dev=%p\n", dev);
+ pr_debug("ray_cs: interrupt for *dev=%p\n", dev);
local = netdev_priv(dev);
link = (struct pcmcia_device *)local->finder;
if (!pcmcia_dev_present(link)) {
- DEBUG(2,
- "ray_cs interrupt from device not present or suspended.\n");
+ pr_debug(
+ "ray_cs interrupt from device not present or suspended.\n");
return IRQ_NONE;
}
rcsindex = readb(&((struct scb __iomem *)(local->sram))->rcs_index);
if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
- DEBUG(1, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
+ dev_dbg(&link->dev, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
clear_interrupt(local);
return IRQ_HANDLED;
}
@@ -2008,33 +1999,33 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
case CCS_DOWNLOAD_STARTUP_PARAMS: /* Happens in firmware someday */
del_timer(&local->timer);
if (status == CCS_COMMAND_COMPLETE) {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt download_startup_parameters OK\n");
} else {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt download_startup_parameters fail\n");
}
break;
case CCS_UPDATE_PARAMS:
- DEBUG(1, "ray_cs interrupt update params done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt update params done\n");
if (status != CCS_COMMAND_COMPLETE) {
tmp =
readb(&pccs->var.update_param.
failure_cause);
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt update params failed - reason %d\n",
tmp);
}
break;
case CCS_REPORT_PARAMS:
- DEBUG(1, "ray_cs interrupt report params done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt report params done\n");
break;
case CCS_UPDATE_MULTICAST_LIST: /* Note that this CCS isn't returned */
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt CCS Update Multicast List done\n");
break;
case CCS_UPDATE_POWER_SAVINGS_MODE:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt update power save mode done\n");
break;
case CCS_START_NETWORK:
@@ -2043,11 +2034,11 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
if (readb
(&pccs->var.start_network.net_initiated) ==
1) {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" started\n",
local->sparm.b4.a_current_ess_id);
} else {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" joined\n",
local->sparm.b4.a_current_ess_id);
}
@@ -2075,12 +2066,12 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
local->timer.expires = jiffies + HZ * 5;
local->timer.data = (long)local;
if (status == CCS_START_NETWORK) {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" start failed\n",
local->sparm.b4.a_current_ess_id);
local->timer.function = &start_net;
} else {
- DEBUG(0,
+ dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" join failed\n",
local->sparm.b4.a_current_ess_id);
local->timer.function = &join_net;
@@ -2091,19 +2082,19 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
case CCS_START_ASSOCIATION:
if (status == CCS_COMMAND_COMPLETE) {
local->card_status = CARD_ASSOC_COMPLETE;
- DEBUG(0, "ray_cs association successful\n");
+ dev_dbg(&link->dev, "ray_cs association successful\n");
} else {
- DEBUG(0, "ray_cs association failed,\n");
+ dev_dbg(&link->dev, "ray_cs association failed,\n");
local->card_status = CARD_ASSOC_FAILED;
join_net((u_long) local);
}
break;
case CCS_TX_REQUEST:
if (status == CCS_COMMAND_COMPLETE) {
- DEBUG(3,
+ dev_dbg(&link->dev,
"ray_cs interrupt tx request complete\n");
} else {
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt tx request failed\n");
}
if (!sniffer)
@@ -2111,21 +2102,21 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
netif_wake_queue(dev);
break;
case CCS_TEST_MEMORY:
- DEBUG(1, "ray_cs interrupt mem test done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt mem test done\n");
break;
case CCS_SHUTDOWN:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt Unexpected CCS returned - Shutdown\n");
break;
case CCS_DUMP_MEMORY:
- DEBUG(1, "ray_cs interrupt dump memory done\n");
+ dev_dbg(&link->dev, "ray_cs interrupt dump memory done\n");
break;
case CCS_START_TIMER:
- DEBUG(2,
+ dev_dbg(&link->dev,
"ray_cs interrupt DING - raylink timer expired\n");
break;
default:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs interrupt Unexpected CCS 0x%x returned 0x%x\n",
rcsindex, cmd);
}
@@ -2139,7 +2130,7 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
ray_rx(dev, local, prcs);
break;
case REJOIN_NET_COMPLETE:
- DEBUG(1, "ray_cs interrupt rejoin net complete\n");
+ dev_dbg(&link->dev, "ray_cs interrupt rejoin net complete\n");
local->card_status = CARD_ACQ_COMPLETE;
/* do we need to clear tx buffers CCS's? */
if (local->sparm.b4.a_network_type == ADHOC) {
@@ -2149,7 +2140,7 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
memcpy_fromio(&local->bss_id,
prcs->var.rejoin_net_complete.
bssid, ADDRLEN);
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs new BSSID = %02x%02x%02x%02x%02x%02x\n",
local->bss_id[0], local->bss_id[1],
local->bss_id[2], local->bss_id[3],
@@ -2159,15 +2150,15 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
}
break;
case ROAMING_INITIATED:
- DEBUG(1, "ray_cs interrupt roaming initiated\n");
+ dev_dbg(&link->dev, "ray_cs interrupt roaming initiated\n");
netif_stop_queue(dev);
local->card_status = CARD_DOING_ACQ;
break;
case JAPAN_CALL_SIGN_RXD:
- DEBUG(1, "ray_cs interrupt japan call sign rx\n");
+ dev_dbg(&link->dev, "ray_cs interrupt japan call sign rx\n");
break;
default:
- DEBUG(1,
+ dev_dbg(&link->dev,
"ray_cs Unexpected interrupt for RCS 0x%x cmd = 0x%x\n",
rcsindex,
(unsigned int)readb(&prcs->interrupt_id));
@@ -2186,7 +2177,7 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
int rx_len;
unsigned int pkt_addr;
void __iomem *pmsg;
- DEBUG(4, "ray_rx process rx packet\n");
+ pr_debug("ray_rx process rx packet\n");
/* Calculate address of packet within Rx buffer */
pkt_addr = ((readb(&prcs->var.rx_packet.rx_data_ptr[0]) << 8)
@@ -2199,28 +2190,28 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
pmsg = local->rmem + pkt_addr;
switch (readb(pmsg)) {
case DATA_TYPE:
- DEBUG(4, "ray_rx data type\n");
+ pr_debug("ray_rx data type\n");
rx_data(dev, prcs, pkt_addr, rx_len);
break;
case AUTHENTIC_TYPE:
- DEBUG(4, "ray_rx authentic type\n");
+ pr_debug("ray_rx authentic type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
else
rx_authenticate(local, prcs, pkt_addr, rx_len);
break;
case DEAUTHENTIC_TYPE:
- DEBUG(4, "ray_rx deauth type\n");
+ pr_debug("ray_rx deauth type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
else
rx_deauthenticate(local, prcs, pkt_addr, rx_len);
break;
case NULL_MSG_TYPE:
- DEBUG(3, "ray_cs rx NULL msg\n");
+ pr_debug("ray_cs rx NULL msg\n");
break;
case BEACON_TYPE:
- DEBUG(4, "ray_rx beacon type\n");
+ pr_debug("ray_rx beacon type\n");
if (sniffer)
rx_data(dev, prcs, pkt_addr, rx_len);
@@ -2233,7 +2224,7 @@ static void ray_rx(struct net_device *dev, ray_dev_t *local,
ray_get_stats(dev);
break;
default:
- DEBUG(0, "ray_cs unknown pkt type %2x\n",
+ pr_debug("ray_cs unknown pkt type %2x\n",
(unsigned int)readb(pmsg));
break;
}
@@ -2262,7 +2253,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
rx_len >
(dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
FCS_LEN)) {
- DEBUG(0,
+ pr_debug(
"ray_cs invalid packet length %d received \n",
rx_len);
return;
@@ -2273,17 +2264,17 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
rx_len >
(dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
FCS_LEN)) {
- DEBUG(0,
+ pr_debug(
"ray_cs invalid packet length %d received \n",
rx_len);
return;
}
}
}
- DEBUG(4, "ray_cs rx_data packet\n");
+ pr_debug("ray_cs rx_data packet\n");
/* If fragmented packet, verify sizes of fragments add up */
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
- DEBUG(1, "ray_cs rx'ed fragment\n");
+ pr_debug("ray_cs rx'ed fragment\n");
tmp = (readb(&prcs->var.rx_packet.totalpacketlength[0]) << 8)
+ readb(&prcs->var.rx_packet.totalpacketlength[1]);
total_len = tmp;
@@ -2301,7 +2292,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
} while (1);
if (tmp < 0) {
- DEBUG(0,
+ pr_debug(
"ray_cs rx_data fragment lengths don't add up\n");
local->stats.rx_dropped++;
release_frag_chain(local, prcs);
@@ -2313,7 +2304,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
skb = dev_alloc_skb(total_len + 5);
if (skb == NULL) {
- DEBUG(0, "ray_cs rx_data could not allocate skb\n");
+ pr_debug("ray_cs rx_data could not allocate skb\n");
local->stats.rx_dropped++;
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF)
release_frag_chain(local, prcs);
@@ -2321,7 +2312,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
}
skb_reserve(skb, 2); /* Align IP on 16 byte (TBD check this) */
- DEBUG(4, "ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
+ pr_debug("ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
rx_len);
/************************/
@@ -2354,7 +2345,7 @@ static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
tmp = 17;
if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
prcslink = prcs;
- DEBUG(1, "ray_cs rx_data in fragment loop\n");
+ pr_debug("ray_cs rx_data in fragment loop\n");
do {
prcslink = rcs_base(local)
+
@@ -2426,8 +2417,8 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
memcpy(destaddr, ieee80211_get_DA(pmac), ADDRLEN);
memcpy(srcaddr, ieee80211_get_SA(pmac), ADDRLEN);
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 3) {
+#if 0
+ if {
print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
DUMP_PREFIX_NONE, 16, 1,
skb->data, 64, true);
@@ -2441,7 +2432,7 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
if (psnap->dsap != 0xaa || psnap->ssap != 0xaa || psnap->ctrl != 3) {
/* not a snap type so leave it alone */
- DEBUG(3, "ray_cs untranslate NOT SNAP %02x %02x %02x\n",
+ pr_debug("ray_cs untranslate NOT SNAP %02x %02x %02x\n",
psnap->dsap, psnap->ssap, psnap->ctrl);
delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
@@ -2450,7 +2441,7 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
} else { /* Its a SNAP */
if (memcmp(psnap->org, org_bridge, 3) == 0) {
/* EtherII and nuke the LLC */
- DEBUG(3, "ray_cs untranslate Bridge encap\n");
+ pr_debug("ray_cs untranslate Bridge encap\n");
delta = RX_MAC_HEADER_LENGTH
+ sizeof(struct snaphdr_t) - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
@@ -2459,14 +2450,14 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
switch (ntohs(type)) {
case ETH_P_IPX:
case ETH_P_AARP:
- DEBUG(3, "ray_cs untranslate RFC IPX/AARP\n");
+ pr_debug("ray_cs untranslate RFC IPX/AARP\n");
delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
peth->h_proto =
htons(len - RX_MAC_HEADER_LENGTH);
break;
default:
- DEBUG(3, "ray_cs untranslate RFC default\n");
+ pr_debug("ray_cs untranslate RFC default\n");
delta = RX_MAC_HEADER_LENGTH +
sizeof(struct snaphdr_t) - ETH_HLEN;
peth = (struct ethhdr *)(skb->data + delta);
@@ -2482,12 +2473,12 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
}
/* TBD reserve skb_reserve(skb, delta); */
skb_pull(skb, delta);
- DEBUG(3, "untranslate after skb_pull(%d), skb->data = %p\n", delta,
+ pr_debug("untranslate after skb_pull(%d), skb->data = %p\n", delta,
skb->data);
memcpy(peth->h_dest, destaddr, ADDRLEN);
memcpy(peth->h_source, srcaddr, ADDRLEN);
-#ifdef PCMCIA_DEBUG
- if (pc_debug > 3) {
+#if 0
+ {
int i;
printk(KERN_DEBUG "skb->data after untranslate:");
for (i = 0; i < 64; i++)
@@ -2529,7 +2520,7 @@ static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs)
while (tmp--) {
writeb(CCS_BUFFER_FREE, &prcslink->buffer_status);
if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
- DEBUG(1, "ray_cs interrupt bad rcsindex = 0x%x\n",
+ pr_debug("ray_cs interrupt bad rcsindex = 0x%x\n",
rcsindex);
break;
}
@@ -2543,9 +2534,9 @@ static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs)
static void authenticate(ray_dev_t *local)
{
struct pcmcia_device *link = local->finder;
- DEBUG(0, "ray_cs Starting authentication.\n");
+ dev_dbg(&link->dev, "ray_cs Starting authentication.\n");
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs authenticate - device not present\n");
+ dev_dbg(&link->dev, "ray_cs authenticate - device not present\n");
return;
}
@@ -2573,11 +2564,11 @@ static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
/* if we are trying to get authenticated */
if (local->sparm.b4.a_network_type == ADHOC) {
- DEBUG(1, "ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
+ pr_debug("ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
msg->var[0], msg->var[1], msg->var[2], msg->var[3],
msg->var[4], msg->var[5]);
if (msg->var[2] == 1) {
- DEBUG(0, "ray_cs Sending authentication response.\n");
+ pr_debug("ray_cs Sending authentication response.\n");
if (!build_auth_frame
(local, msg->mac.addr_2, OPEN_AUTH_RESPONSE)) {
local->authentication_state = NEED_TO_AUTH;
@@ -2591,13 +2582,13 @@ static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
/* Verify authentication sequence #2 and success */
if (msg->var[2] == 2) {
if ((msg->var[3] | msg->var[4]) == 0) {
- DEBUG(1, "Authentication successful\n");
+ pr_debug("Authentication successful\n");
local->card_status = CARD_AUTH_COMPLETE;
associate(local);
local->authentication_state =
AUTHENTICATED;
} else {
- DEBUG(0, "Authentication refused\n");
+ pr_debug("Authentication refused\n");
local->card_status = CARD_AUTH_REFUSED;
join_net((u_long) local);
local->authentication_state =
@@ -2617,22 +2608,22 @@ static void associate(ray_dev_t *local)
struct net_device *dev = link->priv;
int ccsindex;
if (!(pcmcia_dev_present(link))) {
- DEBUG(2, "ray_cs associate - device not present\n");
+ dev_dbg(&link->dev, "ray_cs associate - device not present\n");
return;
}
/* If no tx buffers available, return */
if ((ccsindex = get_free_ccs(local)) < 0) {
/* TBD should never be here but... what if we are? */
- DEBUG(1, "ray_cs associate - No free ccs\n");
+ dev_dbg(&link->dev, "ray_cs associate - No free ccs\n");
return;
}
- DEBUG(1, "ray_cs Starting association with access point\n");
+ dev_dbg(&link->dev, "ray_cs Starting association with access point\n");
pccs = ccs_base(local) + ccsindex;
/* fill in the CCS */
writeb(CCS_START_ASSOCIATION, &pccs->cmd);
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1, "ray_cs associate failed - ECF not ready for intr\n");
+ dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
del_timer(&local->timer);
@@ -2655,7 +2646,7 @@ static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
/* UCHAR buff[256];
struct rx_msg *msg = (struct rx_msg *)buff;
*/
- DEBUG(0, "Deauthentication frame received\n");
+ pr_debug("Deauthentication frame received\n");
local->authentication_state = UNAUTHENTICATED;
/* Need to reauthenticate or rejoin depending on reason code */
/* copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
@@ -2823,7 +2814,7 @@ static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type)
/* If no tx buffers available, return */
if ((ccsindex = get_free_tx_ccs(local)) < 0) {
- DEBUG(1, "ray_cs send authenticate - No free tx ccs\n");
+ pr_debug("ray_cs send authenticate - No free tx ccs\n");
return -1;
}
@@ -2855,7 +2846,7 @@ static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type)
/* Interrupt the firmware to process the command */
if (interrupt_ecf(local, ccsindex)) {
- DEBUG(1,
+ pr_debug(
"ray_cs send authentication request failed - ECF not ready for intr\n");
writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
return -1;
@@ -2942,9 +2933,9 @@ static int __init init_ray_cs(void)
{
int rc;
- DEBUG(1, "%s\n", rcsid);
+ pr_debug("%s\n", rcsid);
rc = pcmcia_register_driver(&ray_driver);
- DEBUG(1, "raylink init_module register_pcmcia_driver returns 0x%x\n",
+ pr_debug("raylink init_module register_pcmcia_driver returns 0x%x\n",
rc);
#ifdef CONFIG_PROC_FS
@@ -2964,7 +2955,7 @@ static int __init init_ray_cs(void)
static void __exit exit_ray_cs(void)
{
- DEBUG(0, "ray_cs: cleanup_module\n");
+ pr_debug("ray_cs: cleanup_module\n");
#ifdef CONFIG_PROC_FS
remove_proc_entry("driver/ray_cs/ray_cs", NULL);
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH 10/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (wireless)
2009-10-24 19:42 [RFC] more PCMCIA cleanup patches for 2.6.33 Dominik Brodowski
@ 2009-10-24 19:43 ` Dominik Brodowski
2009-10-24 19:42 ` [PATCH 08/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (net) Dominik Brodowski
` (6 subsequent siblings)
7 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:43 UTC (permalink / raw)
To: linux-pcmcia; +Cc: Dominik Brodowski, linux-wireless, netdev
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 38802 bytes --]
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/net/wireless/airo_cs.c | 48 +++++----------
drivers/net/wireless/atmel_cs.c | 46 +++++----------
drivers/net/wireless/hostap/hostap_cs.c | 23 +++-----
drivers/net/wireless/netwave_cs.c | 88 +++++++++++----------------
drivers/net/wireless/orinoco/orinoco_cs.c | 27 +++-----
drivers/net/wireless/orinoco/spectrum_cs.c | 54 +++++++++---------
drivers/net/wireless/wavelan_cs.c | 24 --------
drivers/net/wireless/wl3501_cs.c | 67 ++++++++--------------
8 files changed, 136 insertions(+), 241 deletions(-)
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d0593ed..a1b84fc 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -43,21 +43,6 @@
#include "airo.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -145,7 +130,7 @@ static int airo_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "airo_attach()\n");
+ dev_dbg(&p_dev->dev, "airo_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -184,7 +169,7 @@ static int airo_probe(struct pcmcia_device *p_dev)
static void airo_detach(struct pcmcia_device *link)
{
- DEBUG(0, "airo_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_detach\n");
airo_release(link);
@@ -204,9 +189,6 @@ static void airo_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int airo_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -291,11 +273,11 @@ static int airo_config(struct pcmcia_device *link)
{
local_info_t *dev;
win_req_t *req;
- int last_fn, last_ret;
+ int ret;
dev = link->priv;
- DEBUG(0, "airo_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_config\n");
req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
if (!req)
@@ -315,8 +297,8 @@ static int airo_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
- if (last_ret)
+ ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ if (ret)
goto failed;
/*
@@ -324,21 +306,25 @@ static int airo_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
((local_info_t *)link->priv)->eth_dev =
init_airo_card(link->irq.AssignedIRQ,
link->io.BasePort1, 1, &handle_to_dev(link));
if (!((local_info_t *)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@@ -368,8 +354,6 @@ static int airo_config(struct pcmcia_device *link)
kfree(req);
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
airo_release(link);
kfree(req);
@@ -386,7 +370,7 @@ static int airo_config(struct pcmcia_device *link)
static void airo_release(struct pcmcia_device *link)
{
- DEBUG(0, "airo_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_release\n");
pcmcia_disable_device(link);
}
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ddaa859..7838572 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -55,22 +55,6 @@
#include "atmel.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -155,7 +139,7 @@ static int atmel_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "atmel_attach()\n");
+ dev_dbg(&p_dev->dev, "atmel_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -194,7 +178,7 @@ static int atmel_probe(struct pcmcia_device *p_dev)
static void atmel_detach(struct pcmcia_device *link)
{
- DEBUG(0, "atmel_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_detach\n");
atmel_release(link);
@@ -209,9 +193,6 @@ static void atmel_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
@@ -275,13 +256,13 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
static int atmel_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int last_fn, last_ret;
+ int ret;
struct pcmcia_device_id *did;
dev = link->priv;
did = dev_get_drvdata(&handle_to_dev(link));
- DEBUG(0, "atmel_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_config\n");
/*
In this loop, we scan the CIS for configuration table entries,
@@ -303,20 +284,25 @@ static int atmel_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if (link->irq.AssignedIRQ == 0) {
printk(KERN_ALERT
"atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
- goto cs_failed;
+ goto failed;
}
((local_info_t*)link->priv)->eth_dev =
@@ -327,7 +313,7 @@ static int atmel_config(struct pcmcia_device *link)
card_present,
link);
if (!((local_info_t*)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
@@ -340,8 +326,6 @@ static int atmel_config(struct pcmcia_device *link)
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
atmel_release(link);
return -ENODEV;
@@ -359,7 +343,7 @@ static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
- DEBUG(0, "atmel_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_release\n");
if (dev)
stop_atmel_card(dev);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 31b60dd..ca3ab84 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -510,10 +510,6 @@ static void prism2_detach(struct pcmcia_device *link)
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-
/* run after a CARD_INSERTION event is received to configure the PCMCIA
* socket and make the device available to the system */
@@ -605,7 +601,6 @@ static int prism2_config(struct pcmcia_device *link)
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- int last_fn, last_ret;
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
@@ -617,13 +612,12 @@ static int prism2_config(struct pcmcia_device *link)
}
/* Look for an appropriate configuration table entry in the CIS */
- last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -652,8 +646,9 @@ static int prism2_config(struct pcmcia_device *link)
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = prism2_interrupt;
link->irq.Instance = dev;
- CS_CHECK(RequestIRQ,
- pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
}
/*
@@ -661,8 +656,9 @@ static int prism2_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -695,9 +691,6 @@ static int prism2_config(struct pcmcia_device *link)
}
return ret;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
kfree(hw_priv);
prism2_release((u_long)link);
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 9498b46..cbd85de 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -145,23 +145,6 @@ static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */
static const unsigned int txConfKey = 0x02; /* Scramble data packets */
static const unsigned int txConfLoop = 0x01; /* Loopback mode */
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -383,7 +366,7 @@ static int netwave_probe(struct pcmcia_device *link)
struct net_device *dev;
netwave_private *priv;
- DEBUG(0, "netwave_attach()\n");
+ dev_dbg(&link->dev, "netwave_attach()\n");
/* Initialize the struct pcmcia_device structure */
dev = alloc_etherdev(sizeof(netwave_private));
@@ -438,7 +421,7 @@ static void netwave_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "netwave_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_detach\n");
netwave_release(link);
@@ -725,18 +708,15 @@ static const struct iw_handler_def netwave_handler_def =
*
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int netwave_pcmcia_config(struct pcmcia_device *link) {
struct net_device *dev = link->priv;
netwave_private *priv = netdev_priv(dev);
- int i, j, last_ret, last_fn;
+ int i, j, ret;
win_req_t req;
memreq_t mem;
u_char __iomem *ramBase = NULL;
- DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_pcmcia_config\n");
/*
* Try allocating IO ports. This tries a few fixed addresses.
@@ -749,22 +729,24 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/*
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/*
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*
* Allocate a 32K memory window. Note that the struct pcmcia_device
@@ -772,14 +754,18 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
* device needs several windows, you'll need to keep track of
* the handles in your private data structure, dev->priv.
*/
- DEBUG(1, "Setting mem speed of %d\n", mem_speed);
+ dev_dbg(&link->dev, "Setting mem speed of %d\n", mem_speed);
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
req.Base = 0; req.Size = 0x8000;
req.AccessSpeed = mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(&link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x20000; mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link->win, &mem);
+ if (ret)
+ goto failed;
/* Store base address of the common window frame */
ramBase = ioremap(req.Base, 0x8000);
@@ -818,8 +804,6 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
get_uint16(ramBase + NETWAVE_EREG_ARW+2));
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
netwave_release(link);
return -ENODEV;
@@ -837,7 +821,7 @@ static void netwave_release(struct pcmcia_device *link)
struct net_device *dev = link->priv;
netwave_private *priv = netdev_priv(dev);
- DEBUG(0, "netwave_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_release\n");
pcmcia_disable_device(link);
if (link->win)
@@ -892,7 +876,7 @@ static void netwave_reset(struct net_device *dev) {
u_char __iomem *ramBase = priv->ramBase;
unsigned int iobase = dev->base_addr;
- DEBUG(0, "netwave_reset: Done with hardware reset\n");
+ pr_debug("netwave_reset: Done with hardware reset\n");
priv->timeoutCounter = 0;
@@ -988,7 +972,7 @@ static int netwave_hw_xmit(unsigned char* data, int len,
dev->stats.tx_bytes += len;
- DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
+ pr_debug("Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
readb(ramBase + NETWAVE_EREG_SPCQ),
readb(ramBase + NETWAVE_EREG_SPU),
readb(ramBase + NETWAVE_EREG_LIF),
@@ -1000,7 +984,7 @@ static int netwave_hw_xmit(unsigned char* data, int len,
MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
- DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n",
+ pr_debug("TxFreeList %x, MaxData %x, DataOffset %x\n",
TxFreeList, MaxData, DataOffset);
/* Copy packet to the adapter fragment buffers */
@@ -1088,7 +1072,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
status = inb(iobase + NETWAVE_REG_ASR);
if (!pcmcia_dev_present(link)) {
- DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x "
+ pr_debug("netwave_interrupt: Interrupt with status 0x%x "
"from removed or suspended card!\n", status);
break;
}
@@ -1132,7 +1116,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
int txStatus;
txStatus = readb(ramBase + NETWAVE_EREG_TSER);
- DEBUG(3, "Transmit done. TSER = %x id %x\n",
+ pr_debug("Transmit done. TSER = %x id %x\n",
txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
if (txStatus & 0x20) {
@@ -1156,7 +1140,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
* TxGU and TxNOAP is set. (Those are the only ones
* to set TxErr).
*/
- DEBUG(3, "netwave_interrupt: TxDN with error status %x\n",
+ pr_debug("netwave_interrupt: TxDN with error status %x\n",
txStatus);
/* Clear out TxGU, TxNOAP, TxErr and TxTrys */
@@ -1164,7 +1148,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
++dev->stats.tx_errors;
}
- DEBUG(3, "New status is TSER %x ASR %x\n",
+ pr_debug("New status is TSER %x ASR %x\n",
readb(ramBase + NETWAVE_EREG_TSER),
inb(iobase + NETWAVE_REG_ASR));
@@ -1172,7 +1156,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
}
/* TxBA, this would trigger on all error packets received */
/* if (status & 0x01) {
- DEBUG(4, "Transmit buffers available, %x\n", status);
+ pr_debug("Transmit buffers available, %x\n", status);
}
*/
}
@@ -1190,7 +1174,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
*/
static void netwave_watchdog(struct net_device *dev) {
- DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name);
+ pr_debug("%s: netwave_watchdog: watchdog timer expired\n", dev->name);
netwave_reset(dev);
dev->trans_start = jiffies;
netif_wake_queue(dev);
@@ -1211,7 +1195,7 @@ static int netwave_rx(struct net_device *dev)
int i;
u_char *ptr;
- DEBUG(3, "xinw_rx: Receiving ... \n");
+ pr_debug("xinw_rx: Receiving ... \n");
/* Receive max 10 packets for now. */
for (i = 0; i < 10; i++) {
@@ -1237,7 +1221,7 @@ static int netwave_rx(struct net_device *dev)
skb = dev_alloc_skb(rcvLen+5);
if (skb == NULL) {
- DEBUG(1, "netwave_rx: Could not allocate an sk_buff of "
+ pr_debug("netwave_rx: Could not allocate an sk_buff of "
"length %d\n", rcvLen);
++dev->stats.rx_dropped;
/* Tell the adapter to skip the packet */
@@ -1279,7 +1263,7 @@ static int netwave_rx(struct net_device *dev)
wait_WOC(iobase);
writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
- DEBUG(3, "Packet reception ok\n");
+ pr_debug("Packet reception ok\n");
}
return 0;
}
@@ -1288,7 +1272,7 @@ static int netwave_open(struct net_device *dev) {
netwave_private *priv = netdev_priv(dev);
struct pcmcia_device *link = priv->p_dev;
- DEBUG(1, "netwave_open: starting.\n");
+ dev_dbg(&link->dev, "netwave_open: starting.\n");
if (!pcmcia_dev_present(link))
return -ENODEV;
@@ -1305,7 +1289,7 @@ static int netwave_close(struct net_device *dev) {
netwave_private *priv = netdev_priv(dev);
struct pcmcia_device *link = priv->p_dev;
- DEBUG(1, "netwave_close: finishing.\n");
+ dev_dbg(&link->dev, "netwave_close: finishing.\n");
link->open--;
netif_stop_queue(dev);
@@ -1358,11 +1342,11 @@ static void set_multicast_list(struct net_device *dev)
u_char rcvMode = 0;
#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
- static int old;
+ {
+ xstatic int old;
if (old != dev->mc_count) {
old = dev->mc_count;
- DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ pr_debug("%s: setting Rx mode to %d addresses.\n",
dev->name, dev->mc_count);
}
}
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 38c1c9d..da626ec 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -160,12 +160,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
* device available to the system.
*/
-#define CS_CHECK(fn, ret) do { \
- last_fn = (fn); \
- if ((last_ret = (ret)) != 0) \
- goto cs_failed; \
-} while (0)
-
static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -240,7 +234,7 @@ orinoco_cs_config(struct pcmcia_device *link)
struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
+ int ret;
void __iomem *mem;
/*
@@ -257,13 +251,12 @@ orinoco_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -272,14 +265,16 @@ orinoco_cs_config(struct pcmcia_device *link)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
if (!mem)
- goto cs_failed;
+ goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
@@ -288,8 +283,9 @@ orinoco_cs_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Ok, we have the configuration, prepare to register the netdev */
card->node.major = card->node.minor = 0;
@@ -315,9 +311,6 @@ orinoco_cs_config(struct pcmcia_device *link)
* net_device has been registered */
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
orinoco_cs_release(link);
return -ENODEV;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index c361310..700010e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -73,9 +73,6 @@ static void spectrum_cs_release(struct pcmcia_device *link);
#define HCR_MEM16 0x10 /* memory width bit, should be preserved */
-#define CS_CHECK(fn, ret) \
- do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/*
* Reset the card using configuration registers COR and CCSR.
* If IDLE is 1, stop the firmware, so that it can be safely rewritten.
@@ -83,7 +80,7 @@ static void spectrum_cs_release(struct pcmcia_device *link);
static int
spectrum_reset(struct pcmcia_device *link, int idle)
{
- int last_ret, last_fn;
+ int ret;
conf_reg_t reg;
u_int save_cor;
@@ -95,23 +92,26 @@ spectrum_reset(struct pcmcia_device *link, int idle)
reg.Function = 0;
reg.Action = CS_READ;
reg.Offset = CISREG_COR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
save_cor = reg.Value;
/* Soft-Reset card */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = (save_cor | COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
/* Read CCSR */
reg.Action = CS_READ;
reg.Offset = CISREG_CCSR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
/*
* Start or stop the firmware. Memory width bit should be
@@ -120,21 +120,22 @@ spectrum_reset(struct pcmcia_device *link, int idle)
reg.Action = CS_WRITE;
reg.Offset = CISREG_CCSR;
reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
/* Restore original COR configuration index */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = (save_cor & ~COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
+failed:
return -ENODEV;
}
@@ -307,7 +308,7 @@ spectrum_cs_config(struct pcmcia_device *link)
struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
+ int ret;
void __iomem *mem;
/*
@@ -324,13 +325,12 @@ spectrum_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -339,14 +339,16 @@ spectrum_cs_config(struct pcmcia_device *link)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
if (!mem)
- goto cs_failed;
+ goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
@@ -355,8 +357,9 @@ spectrum_cs_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Ok, we have the configuration, prepare to register the netdev */
card->node.major = card->node.minor = 0;
@@ -386,9 +389,6 @@ spectrum_cs_config(struct pcmcia_device *link)
* net_device has been registered */
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
spectrum_cs_release(link);
return -ENODEV;
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 431a20e..2fad4ac 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3656,10 +3656,7 @@ wv_pcmcia_reset(struct net_device * dev)
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
@@ -3670,19 +3667,13 @@ wv_pcmcia_reset(struct net_device * dev)
reg.Value = reg.Value | COR_SW_RESET;
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
reg.Action = CS_WRITE;
reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
@@ -3857,10 +3848,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
{
i = pcmcia_request_io(link, &link->io);
if (i != 0)
- {
- cs_error(link, RequestIO, i);
break;
- }
/*
* Now allocate an interrupt line. Note that this does not
@@ -3868,10 +3856,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0)
- {
- cs_error(link, RequestIRQ, i);
break;
- }
/*
* This actually configures the PCMCIA socket -- setting up
@@ -3880,10 +3865,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
link->conf.ConfigIndex = 1;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
- {
- cs_error(link, RequestConfiguration, i);
break;
- }
/*
* Allocate a small memory window. Note that the struct pcmcia_device
@@ -3896,10 +3878,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
req.AccessSpeed = mem_speed;
i = pcmcia_request_window(&link, &req, &link->win);
if (i != 0)
- {
- cs_error(link, RequestWindow, i);
break;
- }
lp->mem = ioremap(req.Base, req.Size);
dev->mem_start = (u_long)lp->mem;
@@ -3908,10 +3887,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
mem.CardOffset = 0; mem.Page = 0;
i = pcmcia_map_mem_page(link->win, &mem);
if (i != 0)
- {
- cs_error(link, MapMemPage, i);
break;
- }
/* Feed device with this info... */
dev->irq = link->irq.AssignedIRQ;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 4f1e0cf..7e8e269 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -67,23 +67,7 @@
/* For rough constant delay */
#define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); }
-/*
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not
- * define PCMCIA_DEBUG at all, all the debug code will be left out. If you
- * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled --
- * but it can then be enabled for specific modules at load time with a
- * 'pc_debug=#' option to insmod.
- */
-#define PCMCIA_DEBUG 0
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define dprintk(n, format, args...) \
- { if (pc_debug > (n)) \
- printk(KERN_INFO "%s: " format "\n", __func__ , ##args); }
-#else
-#define dprintk(n, format, args...)
-#endif
+
#define wl3501_outb(a, b) { outb(a, b); slow_down_io(); }
#define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); }
@@ -684,10 +668,10 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
int matchflag = 0;
struct wl3501_scan_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
- dprintk(3, "success");
+ pr_debug("success");
if ((this->net_type == IW_MODE_INFRA &&
(sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
(this->net_type == IW_MODE_ADHOC &&
@@ -722,7 +706,7 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
}
}
} else if (sig.status == WL3501_STATUS_TIMEOUT) {
- dprintk(3, "timeout");
+ pr_debug("timeout");
this->join_sta_bss = 0;
for (i = this->join_sta_bss; i < this->bss_cnt; i++)
if (!wl3501_mgmt_join(this, i))
@@ -879,7 +863,7 @@ static int wl3501_mgmt_auth(struct wl3501_card *this)
.timeout = 1000,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -893,7 +877,7 @@ static int wl3501_mgmt_association(struct wl3501_card *this)
.cap_info = this->cap_info,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -903,7 +887,7 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_join_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
if (this->net_type == IW_MODE_INFRA) {
@@ -962,7 +946,7 @@ static inline void wl3501_md_confirm_interrupt(struct net_device *dev,
{
struct wl3501_md_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
wl3501_free_tx_buffer(this, sig.data);
if (netif_queue_stopped(dev))
@@ -1017,7 +1001,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this,
u16 addr, void *sig, int size)
{
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &this->sig_get_confirm,
sizeof(this->sig_get_confirm));
wake_up(&this->wait);
@@ -1029,7 +1013,7 @@ static inline void wl3501_start_confirm_interrupt(struct net_device *dev,
{
struct wl3501_start_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
netif_wake_queue(dev);
@@ -1041,7 +1025,7 @@ static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev,
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_assoc_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1053,7 +1037,7 @@ static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this,
{
struct wl3501_auth_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1069,7 +1053,7 @@ static inline void wl3501_rx_interrupt(struct net_device *dev)
u8 sig_id;
struct wl3501_card *this = netdev_priv(dev);
- dprintk(3, "entry");
+ pr_debug("entry");
loop:
morepkts = 0;
if (!wl3501_esbq_confirm(this))
@@ -1302,7 +1286,7 @@ static int wl3501_reset(struct net_device *dev)
wl3501_ack_interrupt(this);
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
- dprintk(1, "%s: device reset", dev->name);
+ pr_debug("%s: device reset", dev->name);
rc = 0;
out:
return rc;
@@ -1376,7 +1360,7 @@ static int wl3501_open(struct net_device *dev)
link->open++;
/* Initial WL3501 firmware */
- dprintk(1, "%s: Initialize WL3501 firmware...", dev->name);
+ pr_debug("%s: Initialize WL3501 firmware...", dev->name);
if (wl3501_init_firmware(this))
goto fail;
/* Initial device variables */
@@ -1388,7 +1372,7 @@ static int wl3501_open(struct net_device *dev)
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
rc = 0;
- dprintk(1, "%s: WL3501 opened", dev->name);
+ pr_debug("%s: WL3501 opened", dev->name);
printk(KERN_INFO "%s: Card Name: %s\n"
"%s: Firmware Date: %s\n",
dev->name, this->card_name,
@@ -1945,9 +1929,6 @@ out_link:
return -ENOMEM;
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/**
* wl3501_config - configure the PCMCIA socket and make eth device available
* @link - FILL_IN
@@ -1959,7 +1940,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static int wl3501_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- int i = 0, j, last_fn, last_ret;
+ int i = 0, j, ret;
struct wl3501_card *this;
/* Try allocating IO ports. This tries a few fixed addresses. If you
@@ -1975,20 +1956,22 @@ static int wl3501_config(struct pcmcia_device *link)
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/* Now allocate an interrupt line. Note that this does not actually
* assign a handler to the interrupt. */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* This actually configures the PCMCIA socket -- setting up the I/O
* windows and the interrupt mapping. */
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -2041,8 +2024,6 @@ static int wl3501_config(struct pcmcia_device *link)
netif_start_queue(dev);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
wl3501_release(link);
return -ENODEV;
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH 10/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (wireless)
@ 2009-10-24 19:43 ` Dominik Brodowski
0 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:43 UTC (permalink / raw)
To: linux-pcmcia; +Cc: Dominik Brodowski, linux-wireless, netdev
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/net/wireless/airo_cs.c | 48 +++++----------
drivers/net/wireless/atmel_cs.c | 46 +++++----------
drivers/net/wireless/hostap/hostap_cs.c | 23 +++-----
drivers/net/wireless/netwave_cs.c | 88 +++++++++++----------------
drivers/net/wireless/orinoco/orinoco_cs.c | 27 +++-----
drivers/net/wireless/orinoco/spectrum_cs.c | 54 +++++++++---------
drivers/net/wireless/wavelan_cs.c | 24 --------
drivers/net/wireless/wl3501_cs.c | 67 ++++++++--------------
8 files changed, 136 insertions(+), 241 deletions(-)
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d0593ed..a1b84fc 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -43,21 +43,6 @@
#include "airo.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -145,7 +130,7 @@ static int airo_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "airo_attach()\n");
+ dev_dbg(&p_dev->dev, "airo_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -184,7 +169,7 @@ static int airo_probe(struct pcmcia_device *p_dev)
static void airo_detach(struct pcmcia_device *link)
{
- DEBUG(0, "airo_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_detach\n");
airo_release(link);
@@ -204,9 +189,6 @@ static void airo_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int airo_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -291,11 +273,11 @@ static int airo_config(struct pcmcia_device *link)
{
local_info_t *dev;
win_req_t *req;
- int last_fn, last_ret;
+ int ret;
dev = link->priv;
- DEBUG(0, "airo_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_config\n");
req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
if (!req)
@@ -315,8 +297,8 @@ static int airo_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
- if (last_ret)
+ ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ if (ret)
goto failed;
/*
@@ -324,21 +306,25 @@ static int airo_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
((local_info_t *)link->priv)->eth_dev =
init_airo_card(link->irq.AssignedIRQ,
link->io.BasePort1, 1, &handle_to_dev(link));
if (!((local_info_t *)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
At this point, the dev_node_t structure(s) need to be
@@ -368,8 +354,6 @@ static int airo_config(struct pcmcia_device *link)
kfree(req);
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
airo_release(link);
kfree(req);
@@ -386,7 +370,7 @@ static int airo_config(struct pcmcia_device *link)
static void airo_release(struct pcmcia_device *link)
{
- DEBUG(0, "airo_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "airo_release\n");
pcmcia_disable_device(link);
}
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ddaa859..7838572 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -55,22 +55,6 @@
#include "atmel.h"
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -155,7 +139,7 @@ static int atmel_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
- DEBUG(0, "atmel_attach()\n");
+ dev_dbg(&p_dev->dev, "atmel_attach()\n");
/* Interrupt setup */
p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -194,7 +178,7 @@ static int atmel_probe(struct pcmcia_device *p_dev)
static void atmel_detach(struct pcmcia_device *link)
{
- DEBUG(0, "atmel_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_detach\n");
atmel_release(link);
@@ -209,9 +193,6 @@ static void atmel_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
@@ -275,13 +256,13 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
static int atmel_config(struct pcmcia_device *link)
{
local_info_t *dev;
- int last_fn, last_ret;
+ int ret;
struct pcmcia_device_id *did;
dev = link->priv;
did = dev_get_drvdata(&handle_to_dev(link));
- DEBUG(0, "atmel_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_config\n");
/*
In this loop, we scan the CIS for configuration table entries,
@@ -303,20 +284,25 @@ static int atmel_config(struct pcmcia_device *link)
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ }
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if (link->irq.AssignedIRQ == 0) {
printk(KERN_ALERT
"atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
- goto cs_failed;
+ goto failed;
}
((local_info_t*)link->priv)->eth_dev =
@@ -327,7 +313,7 @@ static int atmel_config(struct pcmcia_device *link)
card_present,
link);
if (!((local_info_t*)link->priv)->eth_dev)
- goto cs_failed;
+ goto failed;
/*
@@ -340,8 +326,6 @@ static int atmel_config(struct pcmcia_device *link)
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
atmel_release(link);
return -ENODEV;
@@ -359,7 +343,7 @@ static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
- DEBUG(0, "atmel_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "atmel_release\n");
if (dev)
stop_atmel_card(dev);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 31b60dd..ca3ab84 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -510,10 +510,6 @@ static void prism2_detach(struct pcmcia_device *link)
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-
/* run after a CARD_INSERTION event is received to configure the PCMCIA
* socket and make the device available to the system */
@@ -605,7 +601,6 @@ static int prism2_config(struct pcmcia_device *link)
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- int last_fn, last_ret;
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
@@ -617,13 +612,12 @@ static int prism2_config(struct pcmcia_device *link)
}
/* Look for an appropriate configuration table entry in the CIS */
- last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -652,8 +646,9 @@ static int prism2_config(struct pcmcia_device *link)
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = prism2_interrupt;
link->irq.Instance = dev;
- CS_CHECK(RequestIRQ,
- pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
}
/*
@@ -661,8 +656,9 @@ static int prism2_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -695,9 +691,6 @@ static int prism2_config(struct pcmcia_device *link)
}
return ret;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
kfree(hw_priv);
prism2_release((u_long)link);
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 9498b46..cbd85de 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -145,23 +145,6 @@ static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */
static const unsigned int txConfKey = 0x02; /* Scramble data packets */
static const unsigned int txConfLoop = 0x01; /* Loopback mode */
-/*
- All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
- you do not define PCMCIA_DEBUG at all, all the debug code will be
- left out. If you compile with PCMCIA_DEBUG=0, the debug code will
- be present but disabled -- but it can then be enabled for specific
- modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -383,7 +366,7 @@ static int netwave_probe(struct pcmcia_device *link)
struct net_device *dev;
netwave_private *priv;
- DEBUG(0, "netwave_attach()\n");
+ dev_dbg(&link->dev, "netwave_attach()\n");
/* Initialize the struct pcmcia_device structure */
dev = alloc_etherdev(sizeof(netwave_private));
@@ -438,7 +421,7 @@ static void netwave_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- DEBUG(0, "netwave_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_detach\n");
netwave_release(link);
@@ -725,18 +708,15 @@ static const struct iw_handler_def netwave_handler_def =
*
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int netwave_pcmcia_config(struct pcmcia_device *link) {
struct net_device *dev = link->priv;
netwave_private *priv = netdev_priv(dev);
- int i, j, last_ret, last_fn;
+ int i, j, ret;
win_req_t req;
memreq_t mem;
u_char __iomem *ramBase = NULL;
- DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_pcmcia_config\n");
/*
* Try allocating IO ports. This tries a few fixed addresses.
@@ -749,22 +729,24 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/*
* Now allocate an interrupt line. Note that this does not
* actually assign a handler to the interrupt.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/*
* This actually configures the PCMCIA socket -- setting up
* the I/O windows and the interrupt mapping.
*/
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*
* Allocate a 32K memory window. Note that the struct pcmcia_device
@@ -772,14 +754,18 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
* device needs several windows, you'll need to keep track of
* the handles in your private data structure, dev->priv.
*/
- DEBUG(1, "Setting mem speed of %d\n", mem_speed);
+ dev_dbg(&link->dev, "Setting mem speed of %d\n", mem_speed);
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
req.Base = 0; req.Size = 0x8000;
req.AccessSpeed = mem_speed;
- CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+ ret = pcmcia_request_window(&link, &req, &link->win);
+ if (ret)
+ goto failed;
mem.CardOffset = 0x20000; mem.Page = 0;
- CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ ret = pcmcia_map_mem_page(link->win, &mem);
+ if (ret)
+ goto failed;
/* Store base address of the common window frame */
ramBase = ioremap(req.Base, 0x8000);
@@ -818,8 +804,6 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
get_uint16(ramBase + NETWAVE_EREG_ARW+2));
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
netwave_release(link);
return -ENODEV;
@@ -837,7 +821,7 @@ static void netwave_release(struct pcmcia_device *link)
struct net_device *dev = link->priv;
netwave_private *priv = netdev_priv(dev);
- DEBUG(0, "netwave_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "netwave_release\n");
pcmcia_disable_device(link);
if (link->win)
@@ -892,7 +876,7 @@ static void netwave_reset(struct net_device *dev) {
u_char __iomem *ramBase = priv->ramBase;
unsigned int iobase = dev->base_addr;
- DEBUG(0, "netwave_reset: Done with hardware reset\n");
+ pr_debug("netwave_reset: Done with hardware reset\n");
priv->timeoutCounter = 0;
@@ -988,7 +972,7 @@ static int netwave_hw_xmit(unsigned char* data, int len,
dev->stats.tx_bytes += len;
- DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
+ pr_debug("Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
readb(ramBase + NETWAVE_EREG_SPCQ),
readb(ramBase + NETWAVE_EREG_SPU),
readb(ramBase + NETWAVE_EREG_LIF),
@@ -1000,7 +984,7 @@ static int netwave_hw_xmit(unsigned char* data, int len,
MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
- DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n",
+ pr_debug("TxFreeList %x, MaxData %x, DataOffset %x\n",
TxFreeList, MaxData, DataOffset);
/* Copy packet to the adapter fragment buffers */
@@ -1088,7 +1072,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
status = inb(iobase + NETWAVE_REG_ASR);
if (!pcmcia_dev_present(link)) {
- DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x "
+ pr_debug("netwave_interrupt: Interrupt with status 0x%x "
"from removed or suspended card!\n", status);
break;
}
@@ -1132,7 +1116,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
int txStatus;
txStatus = readb(ramBase + NETWAVE_EREG_TSER);
- DEBUG(3, "Transmit done. TSER = %x id %x\n",
+ pr_debug("Transmit done. TSER = %x id %x\n",
txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
if (txStatus & 0x20) {
@@ -1156,7 +1140,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
* TxGU and TxNOAP is set. (Those are the only ones
* to set TxErr).
*/
- DEBUG(3, "netwave_interrupt: TxDN with error status %x\n",
+ pr_debug("netwave_interrupt: TxDN with error status %x\n",
txStatus);
/* Clear out TxGU, TxNOAP, TxErr and TxTrys */
@@ -1164,7 +1148,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
++dev->stats.tx_errors;
}
- DEBUG(3, "New status is TSER %x ASR %x\n",
+ pr_debug("New status is TSER %x ASR %x\n",
readb(ramBase + NETWAVE_EREG_TSER),
inb(iobase + NETWAVE_REG_ASR));
@@ -1172,7 +1156,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
}
/* TxBA, this would trigger on all error packets received */
/* if (status & 0x01) {
- DEBUG(4, "Transmit buffers available, %x\n", status);
+ pr_debug("Transmit buffers available, %x\n", status);
}
*/
}
@@ -1190,7 +1174,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id)
*/
static void netwave_watchdog(struct net_device *dev) {
- DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name);
+ pr_debug("%s: netwave_watchdog: watchdog timer expired\n", dev->name);
netwave_reset(dev);
dev->trans_start = jiffies;
netif_wake_queue(dev);
@@ -1211,7 +1195,7 @@ static int netwave_rx(struct net_device *dev)
int i;
u_char *ptr;
- DEBUG(3, "xinw_rx: Receiving ... \n");
+ pr_debug("xinw_rx: Receiving ... \n");
/* Receive max 10 packets for now. */
for (i = 0; i < 10; i++) {
@@ -1237,7 +1221,7 @@ static int netwave_rx(struct net_device *dev)
skb = dev_alloc_skb(rcvLen+5);
if (skb == NULL) {
- DEBUG(1, "netwave_rx: Could not allocate an sk_buff of "
+ pr_debug("netwave_rx: Could not allocate an sk_buff of "
"length %d\n", rcvLen);
++dev->stats.rx_dropped;
/* Tell the adapter to skip the packet */
@@ -1279,7 +1263,7 @@ static int netwave_rx(struct net_device *dev)
wait_WOC(iobase);
writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
- DEBUG(3, "Packet reception ok\n");
+ pr_debug("Packet reception ok\n");
}
return 0;
}
@@ -1288,7 +1272,7 @@ static int netwave_open(struct net_device *dev) {
netwave_private *priv = netdev_priv(dev);
struct pcmcia_device *link = priv->p_dev;
- DEBUG(1, "netwave_open: starting.\n");
+ dev_dbg(&link->dev, "netwave_open: starting.\n");
if (!pcmcia_dev_present(link))
return -ENODEV;
@@ -1305,7 +1289,7 @@ static int netwave_close(struct net_device *dev) {
netwave_private *priv = netdev_priv(dev);
struct pcmcia_device *link = priv->p_dev;
- DEBUG(1, "netwave_close: finishing.\n");
+ dev_dbg(&link->dev, "netwave_close: finishing.\n");
link->open--;
netif_stop_queue(dev);
@@ -1358,11 +1342,11 @@ static void set_multicast_list(struct net_device *dev)
u_char rcvMode = 0;
#ifdef PCMCIA_DEBUG
- if (pc_debug > 2) {
- static int old;
+ {
+ xstatic int old;
if (old != dev->mc_count) {
old = dev->mc_count;
- DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ pr_debug("%s: setting Rx mode to %d addresses.\n",
dev->name, dev->mc_count);
}
}
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 38c1c9d..da626ec 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -160,12 +160,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
* device available to the system.
*/
-#define CS_CHECK(fn, ret) do { \
- last_fn = (fn); \
- if ((last_ret = (ret)) != 0) \
- goto cs_failed; \
-} while (0)
-
static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -240,7 +234,7 @@ orinoco_cs_config(struct pcmcia_device *link)
struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
+ int ret;
void __iomem *mem;
/*
@@ -257,13 +251,12 @@ orinoco_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -272,14 +265,16 @@ orinoco_cs_config(struct pcmcia_device *link)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
if (!mem)
- goto cs_failed;
+ goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
@@ -288,8 +283,9 @@ orinoco_cs_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Ok, we have the configuration, prepare to register the netdev */
card->node.major = card->node.minor = 0;
@@ -315,9 +311,6 @@ orinoco_cs_config(struct pcmcia_device *link)
* net_device has been registered */
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
orinoco_cs_release(link);
return -ENODEV;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index c361310..700010e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -73,9 +73,6 @@ static void spectrum_cs_release(struct pcmcia_device *link);
#define HCR_MEM16 0x10 /* memory width bit, should be preserved */
-#define CS_CHECK(fn, ret) \
- do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/*
* Reset the card using configuration registers COR and CCSR.
* If IDLE is 1, stop the firmware, so that it can be safely rewritten.
@@ -83,7 +80,7 @@ static void spectrum_cs_release(struct pcmcia_device *link);
static int
spectrum_reset(struct pcmcia_device *link, int idle)
{
- int last_ret, last_fn;
+ int ret;
conf_reg_t reg;
u_int save_cor;
@@ -95,23 +92,26 @@ spectrum_reset(struct pcmcia_device *link, int idle)
reg.Function = 0;
reg.Action = CS_READ;
reg.Offset = CISREG_COR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
save_cor = reg.Value;
/* Soft-Reset card */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = (save_cor | COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
/* Read CCSR */
reg.Action = CS_READ;
reg.Offset = CISREG_CCSR;
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
/*
* Start or stop the firmware. Memory width bit should be
@@ -120,21 +120,22 @@ spectrum_reset(struct pcmcia_device *link, int idle)
reg.Action = CS_WRITE;
reg.Offset = CISREG_CCSR;
reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
/* Restore original COR configuration index */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = (save_cor & ~COR_SOFT_RESET);
- CS_CHECK(AccessConfigurationRegister,
- pcmcia_access_configuration_register(link, ®));
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
udelay(1000);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
+failed:
return -ENODEV;
}
@@ -307,7 +308,7 @@ spectrum_cs_config(struct pcmcia_device *link)
struct orinoco_private *priv = link->priv;
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
- int last_fn, last_ret;
+ int ret;
void __iomem *mem;
/*
@@ -324,13 +325,12 @@ spectrum_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
- if (last_ret) {
+ ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+ if (ret) {
if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- cs_error(link, RequestIO, last_ret);
goto failed;
}
@@ -339,14 +339,16 @@ spectrum_cs_config(struct pcmcia_device *link)
* a handler to the interrupt, unless the 'Handler' member of
* the irq structure is initialized.
*/
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* We initialize the hermes structure before completing PCMCIA
* configuration just in case the interrupt handler gets
* called. */
mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
if (!mem)
- goto cs_failed;
+ goto failed;
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
@@ -355,8 +357,9 @@ spectrum_cs_config(struct pcmcia_device *link)
* the I/O windows and the interrupt mapping, and putting the
* card and host interface into "Memory and IO" mode.
*/
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Ok, we have the configuration, prepare to register the netdev */
card->node.major = card->node.minor = 0;
@@ -386,9 +389,6 @@ spectrum_cs_config(struct pcmcia_device *link)
* net_device has been registered */
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
-
failed:
spectrum_cs_release(link);
return -ENODEV;
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 431a20e..2fad4ac 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3656,10 +3656,7 @@ wv_pcmcia_reset(struct net_device * dev)
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
#ifdef DEBUG_CONFIG_INFO
printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
@@ -3670,19 +3667,13 @@ wv_pcmcia_reset(struct net_device * dev)
reg.Value = reg.Value | COR_SW_RESET;
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
reg.Action = CS_WRITE;
reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
i = pcmcia_access_configuration_register(link, ®);
if (i != 0)
- {
- cs_error(link, AccessConfigurationRegister, i);
return FALSE;
- }
#ifdef DEBUG_CONFIG_TRACE
printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
@@ -3857,10 +3848,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
{
i = pcmcia_request_io(link, &link->io);
if (i != 0)
- {
- cs_error(link, RequestIO, i);
break;
- }
/*
* Now allocate an interrupt line. Note that this does not
@@ -3868,10 +3856,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != 0)
- {
- cs_error(link, RequestIRQ, i);
break;
- }
/*
* This actually configures the PCMCIA socket -- setting up
@@ -3880,10 +3865,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
link->conf.ConfigIndex = 1;
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0)
- {
- cs_error(link, RequestConfiguration, i);
break;
- }
/*
* Allocate a small memory window. Note that the struct pcmcia_device
@@ -3896,10 +3878,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
req.AccessSpeed = mem_speed;
i = pcmcia_request_window(&link, &req, &link->win);
if (i != 0)
- {
- cs_error(link, RequestWindow, i);
break;
- }
lp->mem = ioremap(req.Base, req.Size);
dev->mem_start = (u_long)lp->mem;
@@ -3908,10 +3887,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
mem.CardOffset = 0; mem.Page = 0;
i = pcmcia_map_mem_page(link->win, &mem);
if (i != 0)
- {
- cs_error(link, MapMemPage, i);
break;
- }
/* Feed device with this info... */
dev->irq = link->irq.AssignedIRQ;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 4f1e0cf..7e8e269 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -67,23 +67,7 @@
/* For rough constant delay */
#define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); }
-/*
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not
- * define PCMCIA_DEBUG at all, all the debug code will be left out. If you
- * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled --
- * but it can then be enabled for specific modules at load time with a
- * 'pc_debug=#' option to insmod.
- */
-#define PCMCIA_DEBUG 0
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define dprintk(n, format, args...) \
- { if (pc_debug > (n)) \
- printk(KERN_INFO "%s: " format "\n", __func__ , ##args); }
-#else
-#define dprintk(n, format, args...)
-#endif
+
#define wl3501_outb(a, b) { outb(a, b); slow_down_io(); }
#define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); }
@@ -684,10 +668,10 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
int matchflag = 0;
struct wl3501_scan_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
- dprintk(3, "success");
+ pr_debug("success");
if ((this->net_type == IW_MODE_INFRA &&
(sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
(this->net_type == IW_MODE_ADHOC &&
@@ -722,7 +706,7 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
}
}
} else if (sig.status == WL3501_STATUS_TIMEOUT) {
- dprintk(3, "timeout");
+ pr_debug("timeout");
this->join_sta_bss = 0;
for (i = this->join_sta_bss; i < this->bss_cnt; i++)
if (!wl3501_mgmt_join(this, i))
@@ -879,7 +863,7 @@ static int wl3501_mgmt_auth(struct wl3501_card *this)
.timeout = 1000,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -893,7 +877,7 @@ static int wl3501_mgmt_association(struct wl3501_card *this)
.cap_info = this->cap_info,
};
- dprintk(3, "entry");
+ pr_debug("entry");
memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
return wl3501_esbq_exec(this, &sig, sizeof(sig));
}
@@ -903,7 +887,7 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_join_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS) {
if (this->net_type == IW_MODE_INFRA) {
@@ -962,7 +946,7 @@ static inline void wl3501_md_confirm_interrupt(struct net_device *dev,
{
struct wl3501_md_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
wl3501_free_tx_buffer(this, sig.data);
if (netif_queue_stopped(dev))
@@ -1017,7 +1001,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this,
u16 addr, void *sig, int size)
{
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &this->sig_get_confirm,
sizeof(this->sig_get_confirm));
wake_up(&this->wait);
@@ -1029,7 +1013,7 @@ static inline void wl3501_start_confirm_interrupt(struct net_device *dev,
{
struct wl3501_start_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
netif_wake_queue(dev);
@@ -1041,7 +1025,7 @@ static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev,
struct wl3501_card *this = netdev_priv(dev);
struct wl3501_assoc_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1053,7 +1037,7 @@ static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this,
{
struct wl3501_auth_confirm sig;
- dprintk(3, "entry");
+ pr_debug("entry");
wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1069,7 +1053,7 @@ static inline void wl3501_rx_interrupt(struct net_device *dev)
u8 sig_id;
struct wl3501_card *this = netdev_priv(dev);
- dprintk(3, "entry");
+ pr_debug("entry");
loop:
morepkts = 0;
if (!wl3501_esbq_confirm(this))
@@ -1302,7 +1286,7 @@ static int wl3501_reset(struct net_device *dev)
wl3501_ack_interrupt(this);
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
- dprintk(1, "%s: device reset", dev->name);
+ pr_debug("%s: device reset", dev->name);
rc = 0;
out:
return rc;
@@ -1376,7 +1360,7 @@ static int wl3501_open(struct net_device *dev)
link->open++;
/* Initial WL3501 firmware */
- dprintk(1, "%s: Initialize WL3501 firmware...", dev->name);
+ pr_debug("%s: Initialize WL3501 firmware...", dev->name);
if (wl3501_init_firmware(this))
goto fail;
/* Initial device variables */
@@ -1388,7 +1372,7 @@ static int wl3501_open(struct net_device *dev)
wl3501_unblock_interrupt(this);
wl3501_mgmt_scan(this, 100);
rc = 0;
- dprintk(1, "%s: WL3501 opened", dev->name);
+ pr_debug("%s: WL3501 opened", dev->name);
printk(KERN_INFO "%s: Card Name: %s\n"
"%s: Firmware Date: %s\n",
dev->name, this->card_name,
@@ -1945,9 +1929,6 @@ out_link:
return -ENOMEM;
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
/**
* wl3501_config - configure the PCMCIA socket and make eth device available
* @link - FILL_IN
@@ -1959,7 +1940,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static int wl3501_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- int i = 0, j, last_fn, last_ret;
+ int i = 0, j, ret;
struct wl3501_card *this;
/* Try allocating IO ports. This tries a few fixed addresses. If you
@@ -1975,20 +1956,22 @@ static int wl3501_config(struct pcmcia_device *link)
if (i == 0)
break;
}
- if (i != 0) {
- cs_error(link, RequestIO, i);
+ if (i != 0)
goto failed;
- }
/* Now allocate an interrupt line. Note that this does not actually
* assign a handler to the interrupt. */
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
/* This actually configures the PCMCIA socket -- setting up the I/O
* windows and the interrupt mapping. */
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
@@ -2041,8 +2024,6 @@ static int wl3501_config(struct pcmcia_device *link)
netif_start_queue(dev);
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
wl3501_release(link);
return -ENODEV;
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH 11/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (scsi)
2009-10-24 19:42 [RFC] more PCMCIA cleanup patches for 2.6.33 Dominik Brodowski
` (3 preceding siblings ...)
2009-10-24 19:43 ` Dominik Brodowski
@ 2009-10-24 19:43 ` Dominik Brodowski
2009-10-24 20:16 ` Rolf Eike Beer
2009-10-24 19:43 ` [PATCH 12/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (serial_cs) Dominik Brodowski
` (2 subsequent siblings)
7 siblings, 1 reply; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:43 UTC (permalink / raw)
To: linux-pcmcia; +Cc: Dominik Brodowski, linux-scsi
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-scsi@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/scsi/pcmcia/aha152x_stub.c | 40 +++++++++++---------------------
drivers/scsi/pcmcia/fdomain_stub.c | 43 ++++++++++++----------------------
drivers/scsi/pcmcia/qlogic_stub.c | 44 +++++++++++++----------------------
drivers/scsi/pcmcia/sym53c500_cs.c | 41 +++++++++++----------------------
4 files changed, 59 insertions(+), 109 deletions(-)
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 67cde01..43ad074 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -54,15 +54,6 @@
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"aha152x_cs.c 1.54 2000/06/12 21:27:25 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -103,7 +94,7 @@ static int aha152x_probe(struct pcmcia_device *link)
{
scsi_info_t *info;
- DEBUG(0, "aha152x_attach()\n");
+ dev_dbg(&link->dev, "aha152x_attach()\n");
/* Create new SCSI device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -127,7 +118,7 @@ static int aha152x_probe(struct pcmcia_device *link)
static void aha152x_detach(struct pcmcia_device *link)
{
- DEBUG(0, "aha152x_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "aha152x_detach\n");
aha152x_release_cs(link);
@@ -137,9 +128,6 @@ static void aha152x_detach(struct pcmcia_device *link)
/*====================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int aha152x_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -164,19 +152,21 @@ static int aha152x_config_cs(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
struct aha152x_setup s;
- int last_ret, last_fn;
+ int ret
struct Scsi_Host *host;
- DEBUG(0, "aha152x_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "aha152x_config\n");
- last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
- if (last_ret) {
- cs_error(link, RequestIO, last_ret);
- goto failed;
- }
+ ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
+ if (ret)
+ goto failed;
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Set configuration options for the aha152x driver */
memset(&s, 0, sizeof(s));
@@ -194,7 +184,7 @@ static int aha152x_config_cs(struct pcmcia_device *link)
host = aha152x_probe_one(&s);
if (host == NULL) {
printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
- goto cs_failed;
+ goto failed;
}
sprintf(info->node.dev_name, "scsi%d", host->host_no);
@@ -203,8 +193,6 @@ static int aha152x_config_cs(struct pcmcia_device *link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
aha152x_release_cs(link);
return -ENODEV;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 06254f4..5792b55 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -59,16 +59,6 @@ MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("Future Domain PCMCIA SCSI driver");
MODULE_LICENSE("Dual MPL/GPL");
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"fdomain_cs.c 1.47 2001/10/13 00:08:52 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
-
/*====================================================================*/
typedef struct scsi_info_t {
@@ -86,7 +76,7 @@ static int fdomain_probe(struct pcmcia_device *link)
{
scsi_info_t *info;
- DEBUG(0, "fdomain_attach()\n");
+ dev_dbg(&link->dev, "fdomain_attach()\n");
/* Create new SCSI device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -111,7 +101,7 @@ static int fdomain_probe(struct pcmcia_device *link)
static void fdomain_detach(struct pcmcia_device *link)
{
- DEBUG(0, "fdomain_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "fdomain_detach\n");
fdomain_release(link);
@@ -120,9 +110,6 @@ static void fdomain_detach(struct pcmcia_device *link)
/*====================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int fdomain_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -137,20 +124,22 @@ static int fdomain_config_check(struct pcmcia_device *p_dev,
static int fdomain_config(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
- int last_ret, last_fn;
+ int ret;
char str[22];
struct Scsi_Host *host;
- DEBUG(0, "fdomain_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "fdomain_config\n");
- last_ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
- if (last_ret) {
- cs_error(link, RequestIO, last_ret);
+ ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
+ if (ret)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* A bad hack... */
release_region(link->io.BasePort1, link->io.NumPorts1);
@@ -162,11 +151,11 @@ static int fdomain_config(struct pcmcia_device *link)
host = __fdomain_16x0_detect(&fdomain_driver_template);
if (!host) {
printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
- goto cs_failed;
+ goto failed;
}
if (scsi_add_host(host, NULL))
- goto cs_failed;
+ goto failed;
scsi_scan_host(host);
sprintf(info->node.dev_name, "scsi%d", host->host_no);
@@ -175,8 +164,6 @@ static int fdomain_config(struct pcmcia_device *link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
fdomain_release(link);
return -ENODEV;
@@ -188,7 +175,7 @@ static void fdomain_release(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
- DEBUG(0, "fdomain_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "fdomain_release\n");
scsi_remove_host(info->host);
pcmcia_disable_device(link);
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index 20c3e5e..65d7ad5 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -62,15 +62,6 @@
static char qlogic_name[] = "qlogic_cs";
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "qlogic_cs.c 1.79-ac 2002/10/26 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
-
static struct scsi_host_template qlogicfas_driver_template = {
.module = THIS_MODULE,
.name = qlogic_name,
@@ -159,7 +150,7 @@ static int qlogic_probe(struct pcmcia_device *link)
{
scsi_info_t *info;
- DEBUG(0, "qlogic_attach()\n");
+ dev_dbg(&link->dev, "qlogic_attach()\n");
/* Create new SCSI device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -183,7 +174,7 @@ static int qlogic_probe(struct pcmcia_device *link)
static void qlogic_detach(struct pcmcia_device *link)
{
- DEBUG(0, "qlogic_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "qlogic_detach\n");
qlogic_release(link);
kfree(link->priv);
@@ -192,9 +183,6 @@ static void qlogic_detach(struct pcmcia_device *link)
/*====================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int qlogic_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -213,19 +201,22 @@ static int qlogic_config_check(struct pcmcia_device *p_dev,
static int qlogic_config(struct pcmcia_device * link)
{
scsi_info_t *info = link->priv;
- int last_ret, last_fn;
+ int ret;
struct Scsi_Host *host;
- DEBUG(0, "qlogic_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "qlogic_config\n");
- last_ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
- if (last_ret) {
- cs_error(link, RequestIO, last_ret);
+ ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
/* set ATAcmd */
@@ -244,7 +235,7 @@ static int qlogic_config(struct pcmcia_device * link)
if (!host) {
printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
- goto cs_failed;
+ goto failed;
}
sprintf(info->node.dev_name, "scsi%d", host->host_no);
@@ -253,12 +244,9 @@ static int qlogic_config(struct pcmcia_device * link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
- pcmcia_disable_device(link);
failed:
+ pcmcia_disable_device(link);
return -ENODEV;
-
} /* qlogic_config */
/*====================================================================*/
@@ -267,7 +255,7 @@ static void qlogic_release(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
- DEBUG(0, "qlogic_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "qlogic_release\n");
scsi_remove_host(info->host);
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index b330c11..851a41c 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -77,17 +77,6 @@
#include <pcmcia/ds.h>
#include <pcmcia/ciscode.h>
-/* ================================================================== */
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"sym53c500_cs.c 0.9c 2004/10/27 (Bob Tracy)";
-#else
-#define DEBUG(n, args...)
-#endif
/* ================================================================== */
@@ -525,7 +514,7 @@ SYM53C500_release(struct pcmcia_device *link)
struct scsi_info_t *info = link->priv;
struct Scsi_Host *shost = info->host;
- DEBUG(0, "SYM53C500_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "SYM53C500_release\n");
/*
* Do this before releasing/freeing resources.
@@ -697,9 +686,6 @@ static struct scsi_host_template sym53c500_driver_template = {
.shost_attrs = SYM53C500_shost_attrs
};
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int SYM53C500_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -719,24 +705,27 @@ static int
SYM53C500_config(struct pcmcia_device *link)
{
struct scsi_info_t *info = link->priv;
- int last_ret, last_fn;
+ int ret;
int irq_level, port_base;
struct Scsi_Host *host;
struct scsi_host_template *tpnt = &sym53c500_driver_template;
struct sym53c500_data *data;
- DEBUG(0, "SYM53C500_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "SYM53C500_config\n");
info->manf_id = link->manf_id;
- last_ret = pcmcia_loop_config(link, SYM53C500_config_check, NULL);
- if (last_ret) {
- cs_error(link, RequestIO, last_ret);
+ ret = pcmcia_loop_config(link, SYM53C500_config_check, NULL);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/*
* That's the trouble with copying liberally from another driver.
@@ -824,8 +813,6 @@ err_release:
printk(KERN_INFO "sym53c500_cs: no SCSI devices found\n");
return -ENODEV;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
SYM53C500_release(link);
return -ENODEV;
@@ -855,7 +842,7 @@ static int sym53c500_resume(struct pcmcia_device *link)
static void
SYM53C500_detach(struct pcmcia_device *link)
{
- DEBUG(0, "SYM53C500_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "SYM53C500_detach\n");
SYM53C500_release(link);
@@ -868,7 +855,7 @@ SYM53C500_probe(struct pcmcia_device *link)
{
struct scsi_info_t *info;
- DEBUG(0, "SYM53C500_attach()\n");
+ dev_dbg(&link->dev, "SYM53C500_attach()\n");
/* Create new SCSI device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH 11/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (scsi)
2009-10-24 19:43 ` [PATCH 11/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (scsi) Dominik Brodowski
@ 2009-10-24 20:16 ` Rolf Eike Beer
2009-10-24 20:39 ` Dominik Brodowski
0 siblings, 1 reply; 31+ messages in thread
From: Rolf Eike Beer @ 2009-10-24 20:16 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: linux-pcmcia, linux-scsi
[-- Attachment #1: Type: Text/Plain, Size: 331 bytes --]
Dominik Brodowski wrote:
> @@ -164,19 +152,21 @@ static int aha152x_config_cs(struct pcmcia_device
> *link) {
> scsi_info_t *info = link->priv;
> struct aha152x_setup s;
> - int last_ret, last_fn;
> + int ret
> struct Scsi_Host *host;
This looks not even compile tested, there is a semicolon missing.
Eike
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: [PATCH 11/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (scsi)
2009-10-24 20:16 ` Rolf Eike Beer
@ 2009-10-24 20:39 ` Dominik Brodowski
0 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 20:39 UTC (permalink / raw)
To: Rolf Eike Beer; +Cc: linux-pcmcia, linux-scsi
On Sat, Oct 24, 2009 at 10:16:49PM +0200, Rolf Eike Beer wrote:
> Dominik Brodowski wrote:
>
> > @@ -164,19 +152,21 @@ static int aha152x_config_cs(struct pcmcia_device
> > *link) {
> > scsi_info_t *info = link->priv;
> > struct aha152x_setup s;
> > - int last_ret, last_fn;
> > + int ret
> > struct Scsi_Host *host;
>
> This looks not even compile tested, there is a semicolon missing.
Indeed, for this driver is !64BIT.... Updated patch (aha152x_stub.c only)
attached.
Thanks for noticing this issue.
Dominik
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 67cde01..4329e4e 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -54,15 +54,6 @@
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"aha152x_cs.c 1.54 2000/06/12 21:27:25 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -103,7 +94,7 @@ static int aha152x_probe(struct pcmcia_device *link)
{
scsi_info_t *info;
- DEBUG(0, "aha152x_attach()\n");
+ dev_dbg(&link->dev, "aha152x_attach()\n");
/* Create new SCSI device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -127,7 +118,7 @@ static int aha152x_probe(struct pcmcia_device *link)
static void aha152x_detach(struct pcmcia_device *link)
{
- DEBUG(0, "aha152x_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "aha152x_detach\n");
aha152x_release_cs(link);
@@ -137,9 +128,6 @@ static void aha152x_detach(struct pcmcia_device *link)
/*====================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int aha152x_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -164,19 +152,22 @@ static int aha152x_config_cs(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
struct aha152x_setup s;
- int last_ret, last_fn;
+ int ret;
struct Scsi_Host *host;
- DEBUG(0, "aha152x_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "aha152x_config\n");
- last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
- if (last_ret) {
- cs_error(link, RequestIO, last_ret);
- goto failed;
- }
+ ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
+ if (ret)
+ goto failed;
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
/* Set configuration options for the aha152x driver */
memset(&s, 0, sizeof(s));
@@ -194,7 +185,7 @@ static int aha152x_config_cs(struct pcmcia_device *link)
host = aha152x_probe_one(&s);
if (host == NULL) {
printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
- goto cs_failed;
+ goto failed;
}
sprintf(info->node.dev_name, "scsi%d", host->host_no);
@@ -203,8 +194,6 @@ static int aha152x_config_cs(struct pcmcia_device *link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
aha152x_release_cs(link);
return -ENODEV;
^ permalink raw reply related [flat|nested] 31+ messages in thread
* [PATCH 12/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (serial_cs)
2009-10-24 19:42 [RFC] more PCMCIA cleanup patches for 2.6.33 Dominik Brodowski
` (4 preceding siblings ...)
2009-10-24 19:43 ` [PATCH 11/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (scsi) Dominik Brodowski
@ 2009-10-24 19:43 ` Dominik Brodowski
2009-10-24 19:43 ` [PATCH 13/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound) Dominik Brodowski
2009-10-24 19:43 ` [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers) Dominik Brodowski
7 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:43 UTC (permalink / raw)
To: linux-pcmcia; +Cc: Dominik Brodowski, linux-serial, Russell King
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-serial@vger.kernel.org
CC: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/serial/serial_cs.c | 53 ++++++++++++++-----------------------------
1 files changed, 17 insertions(+), 36 deletions(-)
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7bf02cf..3b31bee 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -54,14 +54,6 @@
#include "8250.h"
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -121,24 +113,20 @@ static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_
static int quirk_post_ibm(struct pcmcia_device *link)
{
conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
- int last_ret, last_fn;
+ int ret;
+
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
- last_ret = pcmcia_access_configuration_register(link, ®);
- if (last_ret) {
- last_fn = AccessConfigurationRegister;
- goto cs_failed;
- }
reg.Action = CS_WRITE;
reg.Value = reg.Value | 1;
- last_ret = pcmcia_access_configuration_register(link, ®);
- if (last_ret) {
- last_fn = AccessConfigurationRegister;
- goto cs_failed;
- }
+ ret = pcmcia_access_configuration_register(link, ®);
+ if (ret)
+ goto failed;
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
+ failed:
return -ENODEV;
}
@@ -283,7 +271,7 @@ static void serial_remove(struct pcmcia_device *link)
struct serial_info *info = link->priv;
int i;
- DEBUG(0, "serial_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "serial_release\n");
/*
* Recheck to see if the device is still configured.
@@ -334,7 +322,7 @@ static int serial_probe(struct pcmcia_device *link)
{
struct serial_info *info;
- DEBUG(0, "serial_attach()\n");
+ dev_dbg(&link->dev, "serial_attach()\n");
/* Create new serial device */
info = kzalloc(sizeof (*info), GFP_KERNEL);
@@ -370,7 +358,7 @@ static void serial_detach(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
- DEBUG(0, "serial_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "serial_detach\n");
/*
* Ensure any outstanding scheduled tasks are completed.
@@ -507,15 +495,13 @@ static int simple_config(struct pcmcia_device *link)
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
- cs_error(link, RequestIO, i);
return -1;
found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != 0) {
- cs_error(link, RequestIRQ, i);
+ if (i != 0)
link->irq.AssignedIRQ = 0;
- }
+
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
@@ -526,10 +512,8 @@ found_port:
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
- if (i != 0) {
- cs_error(link, RequestConfiguration, i);
+ if (i != 0)
return -1;
- }
return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
@@ -598,7 +582,6 @@ static int multi_config(struct pcmcia_device *link)
/* FIXME: comment does not fit, error handling does not fit */
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
- cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
@@ -609,10 +592,8 @@ static int multi_config(struct pcmcia_device *link)
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
- if (i != 0) {
- cs_error(link, RequestConfiguration, i);
+ if (i != 0)
return -ENODEV;
- }
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
* 8 registers are for the UART, the others are extra registers.
@@ -682,7 +663,7 @@ static int serial_config(struct pcmcia_device * link)
struct serial_info *info = link->priv;
int i;
- DEBUG(0, "serial_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "serial_config\n");
/* Is this a compliant multifunction card? */
info->multi = (link->socket->functions > 1);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* [PATCH 13/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound)
2009-10-24 19:42 [RFC] more PCMCIA cleanup patches for 2.6.33 Dominik Brodowski
` (5 preceding siblings ...)
2009-10-24 19:43 ` [PATCH 12/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (serial_cs) Dominik Brodowski
@ 2009-10-24 19:43 ` Dominik Brodowski
2009-11-02 10:43 ` Takashi Iwai
2009-10-24 19:43 ` [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers) Dominik Brodowski
7 siblings, 1 reply; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:43 UTC (permalink / raw)
To: linux-pcmcia; +Cc: alsa-devel, Dominik Brodowski, Jaroslav Kysela
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: Jaroslav Kysela <perex@perex.cz>
CC: alsa-devel@alsa-project.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
sound/pcmcia/pdaudiocf/pdaudiocf.c | 21 ++++++++++++---------
sound/pcmcia/vx/vxpocket.c | 21 ++++++++++++---------
2 files changed, 24 insertions(+), 18 deletions(-)
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index 7dea74b..64b8599 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -217,20 +217,25 @@ static void snd_pdacf_detach(struct pcmcia_device *link)
* configuration callback
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int pdacf_config(struct pcmcia_device *link)
{
struct snd_pdacf *pdacf = link->priv;
- int last_fn, last_ret;
+ int ret;
snd_printdd(KERN_DEBUG "pdacf_config called\n");
link->conf.ConfigIndex = 0x5;
- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_io(link, &link->io);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
goto failed;
@@ -238,8 +243,6 @@ static int pdacf_config(struct pcmcia_device *link)
link->dev_node = &pdacf->node;
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
pcmcia_disable_device(link);
return -ENODEV;
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 7445cc8..1492744 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -213,14 +213,11 @@ static int snd_vxpocket_assign_resources(struct vx_core *chip, int port, int irq
* configuration callback
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int vxpocket_config(struct pcmcia_device *link)
{
struct vx_core *chip = link->priv;
struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
- int last_fn, last_ret;
+ int ret;
snd_printdd(KERN_DEBUG "vxpocket_config called\n");
@@ -235,9 +232,17 @@ static int vxpocket_config(struct pcmcia_device *link)
strcpy(chip->card->driver, vxp440_hw.name);
}
- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_io(link, &link->io);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
chip->dev = &handle_to_dev(link);
snd_card_set_dev(chip->card, chip->dev);
@@ -248,8 +253,6 @@ static int vxpocket_config(struct pcmcia_device *link)
link->dev_node = &vxp->node;
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
pcmcia_disable_device(link);
return -ENODEV;
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH 13/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound)
2009-10-24 19:43 ` [PATCH 13/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound) Dominik Brodowski
@ 2009-11-02 10:43 ` Takashi Iwai
0 siblings, 0 replies; 31+ messages in thread
From: Takashi Iwai @ 2009-11-02 10:43 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: alsa-devel, linux-pcmcia
At Sat, 24 Oct 2009 21:43:03 +0200,
Dominik Brodowski wrote:
>
> Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
> requiring manual settings of PCMCIA_DEBUG.
>
> Also, remove all usages of the CS_CHECK macro and replace them with proper
> Linux style calling and return value checking. The extra error reporting may
> be dropped, as the PCMCIA core already complains about any (non-driver-author)
> errors.
>
> CC: Jaroslav Kysela <perex@perex.cz>
> CC: alsa-devel@alsa-project.org
> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Thanks, applied to sound git tree now.
Takashi
^ permalink raw reply [flat|nested] 31+ messages in thread
* [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-24 19:42 [RFC] more PCMCIA cleanup patches for 2.6.33 Dominik Brodowski
` (6 preceding siblings ...)
2009-10-24 19:43 ` [PATCH 13/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound) Dominik Brodowski
@ 2009-10-24 19:43 ` Dominik Brodowski
2009-10-26 6:42 ` Artem Bityutskiy
7 siblings, 1 reply; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-24 19:43 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linux-usb, linux-mtd, Dominik Brodowski
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
requiring manual settings of PCMCIA_DEBUG.
Also, remove all usages of the CS_CHECK macro and replace them with proper
Linux style calling and return value checking. The extra error reporting may
be dropped, as the PCMCIA core already complains about any (non-driver-author)
errors.
CC: linux-mtd@lists.infradead.org
CC: linux-usb@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
drivers/mtd/maps/pcmciamtd.c | 14 +----------
drivers/parport/parport_cs.c | 37 +++++++++++--------------------
drivers/telephony/ixj_pcmcia.c | 36 +++++++++++--------------------
drivers/usb/host/sl811_cs.c | 46 +++++++++++----------------------------
4 files changed, 41 insertions(+), 92 deletions(-)
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 52c07f2..fa00919 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -119,10 +119,8 @@ static caddr_t remap_window(struct map_info *map, unsigned long to)
dev->offset, mrq.CardOffset);
mrq.Page = 0;
ret = pcmcia_map_mem_page(win, &mrq);
- if (ret != 0) {
- cs_error(dev->p_dev, MapMemPage, ret);
+ if (ret != 0)
return NULL;
- }
dev->offset = mrq.CardOffset;
}
return dev->win_base + (to & (dev->win_size-1));
@@ -327,8 +325,6 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on)
DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
ret = pcmcia_modify_configuration(link, &mod);
- if (ret != 0)
- cs_error(link, ModifyConfiguration, ret);
}
@@ -488,16 +484,12 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *link,
* MTD device available to the system.
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int pcmciamtd_config(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
struct mtd_info *mtd = NULL;
cs_status_t status;
win_req_t req;
- int last_ret = 0, last_fn = 0;
int ret;
int i;
static char *probes[] = { "jedec_probe", "cfi_probe" };
@@ -584,7 +576,6 @@ static int pcmciamtd_config(struct pcmcia_device *link)
DEBUG(2, "Setting Configuration");
ret = pcmcia_request_configuration(link, &link->conf);
if (ret != 0) {
- cs_error(link, RequestConfiguration, ret);
if (dev->win_base) {
iounmap(dev->win_base);
dev->win_base = NULL;
@@ -659,8 +650,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
link->dev_node = &dev->node;
return 0;
- cs_failed:
- cs_error(link, last_fn, last_ret);
+ failed:
err("CS Error, exiting");
pcmciamtd_release(link);
return -ENODEV;
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 8fdfa4f..e56a4de 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -67,14 +67,6 @@ MODULE_LICENSE("Dual MPL/GPL");
INT_MODULE_PARM(epp_mode, 1);
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"parport_cs.c 1.29 2002/10/11 06:57:41 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
@@ -103,7 +95,7 @@ static int parport_probe(struct pcmcia_device *link)
{
parport_info_t *info;
- DEBUG(0, "parport_attach()\n");
+ dev_dbg(&link->dev, "parport_attach()\n");
/* Create new parport device */
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -132,7 +124,7 @@ static int parport_probe(struct pcmcia_device *link)
static void parport_detach(struct pcmcia_device *link)
{
- DEBUG(0, "parport_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "parport_detach\n");
parport_cs_release(link);
@@ -147,9 +139,6 @@ static void parport_detach(struct pcmcia_device *link)
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int parport_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
cistpl_cftable_entry_t *dflt,
@@ -178,18 +167,20 @@ static int parport_config(struct pcmcia_device *link)
{
parport_info_t *info = link->priv;
struct parport *p;
- int last_ret, last_fn;
+ int ret;
- DEBUG(0, "parport_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "parport_config\n");
- last_ret = pcmcia_loop_config(link, parport_config_check, NULL);
- if (last_ret) {
- cs_error(link, RequestIO, last_ret);
+ ret = pcmcia_loop_config(link, parport_config_check, NULL);
+ if (ret)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
link->irq.AssignedIRQ, PARPORT_DMA_NONE,
@@ -213,8 +204,6 @@ static int parport_config(struct pcmcia_device *link)
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
parport_cs_release(link);
return -ENODEV;
@@ -232,7 +221,7 @@ static void parport_cs_release(struct pcmcia_device *link)
{
parport_info_t *info = link->priv;
- DEBUG(0, "parport_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "parport_release\n");
if (info->ndev) {
struct parport *p = info->port;
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index 347c3ed..86f2767 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -19,13 +19,6 @@
* PCMCIA service support for Quicknet cards
*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
typedef struct ixj_info_t {
int ndev;
@@ -39,7 +32,7 @@ static void ixj_cs_release(struct pcmcia_device * link);
static int ixj_probe(struct pcmcia_device *p_dev)
{
- DEBUG(0, "ixj_attach()\n");
+ dev_dbg(&link->dev, "ixj_attach()\n");
/* Create new ixj device */
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
@@ -55,33 +48,30 @@ static int ixj_probe(struct pcmcia_device *p_dev)
static void ixj_detach(struct pcmcia_device *link)
{
- DEBUG(0, "ixj_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "ixj_detach\n");
ixj_cs_release(link);
kfree(link->priv);
}
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
{
char *str;
int i, place;
- DEBUG(0, "ixj_get_serial(0x%p)\n", link);
+ dev_dbg(&link->dev, "ixj_get_serial\n");
str = link->prod_id[0];
if (!str)
- goto cs_failed;
+ goto failed;
printk("%s", str);
str = link->prod_id[1];
if (!str)
- goto cs_failed;
+ goto failed;
printk(" %s", str);
str = link->prod_id[2];
if (!str)
- goto cs_failed;
+ goto failed;
place = 1;
for (i = strlen(str) - 1; i >= 0; i--) {
switch (str[i]) {
@@ -118,9 +108,9 @@ static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
}
str = link->prod_id[3];
if (!str)
- goto cs_failed;
+ goto failed;
printk(" version %s\n", str);
- cs_failed:
+ failed:
return;
}
@@ -151,13 +141,13 @@ static int ixj_config(struct pcmcia_device * link)
cistpl_cftable_entry_t dflt = { 0 };
info = link->priv;
- DEBUG(0, "ixj_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "ixj_config\n");
if (pcmcia_loop_config(link, ixj_config_check, &dflt))
- goto cs_failed;
+ goto failed;
if (pcmcia_request_configuration(link, &link->conf))
- goto cs_failed;
+ goto failed;
/*
* Register the card with the core.
@@ -170,7 +160,7 @@ static int ixj_config(struct pcmcia_device * link)
ixj_get_serial(link, j);
return 0;
- cs_failed:
+ failed:
ixj_cs_release(link);
return -ENODEV;
}
@@ -178,7 +168,7 @@ static int ixj_config(struct pcmcia_device * link)
static void ixj_cs_release(struct pcmcia_device *link)
{
ixj_info_t *info = link->priv;
- DEBUG(0, "ixj_cs_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "ixj_cs_release\n");
info->ndev = 0;
pcmcia_disable_device(link);
}
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 516848d..4607742 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -37,28 +37,8 @@ MODULE_LICENSE("GPL");
/* MACROS */
/*====================================================================*/
-#if defined(DEBUG) || defined(PCMCIA_DEBUG)
-
-static int pc_debug = 0;
-module_param(pc_debug, int, 0644);
-
-#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args)
-
-#else
-#define DBG(n, args...) do{}while(0)
-#endif /* no debugging */
-
#define INFO(args...) printk(KERN_INFO "sl811_cs: " args)
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444)
-
-#define CS_CHECK(fn, ret) \
- do { \
- last_fn = (fn); \
- if ((last_ret = (ret)) != 0) \
- goto cs_failed; \
- } while (0)
-
/*====================================================================*/
/* VARIABLES */
/*====================================================================*/
@@ -76,7 +56,7 @@ static void sl811_cs_release(struct pcmcia_device * link);
static void release_platform_dev(struct device * dev)
{
- DBG(0, "sl811_cs platform_dev release\n");
+ dev_dbg(dev, "sl811_cs platform_dev release\n");
dev->parent = NULL;
}
@@ -140,7 +120,7 @@ static int sl811_hc_init(struct device *parent, resource_size_t base_addr,
static void sl811_cs_detach(struct pcmcia_device *link)
{
- DBG(0, "sl811_cs_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "sl811_cs_detach\n");
sl811_cs_release(link);
@@ -150,7 +130,7 @@ static void sl811_cs_detach(struct pcmcia_device *link)
static void sl811_cs_release(struct pcmcia_device * link)
{
- DBG(0, "sl811_cs_release(0x%p)\n", link);
+ dev_dbg(&link->dev, "sl811_cs_release\n");
pcmcia_disable_device(link);
platform_device_unregister(&platform_dev);
@@ -207,9 +187,9 @@ static int sl811_cs_config(struct pcmcia_device *link)
{
struct device *parent = &handle_to_dev(link);
local_info_t *dev = link->priv;
- int last_fn, last_ret;
+ int ret;
- DBG(0, "sl811_cs_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "sl811_cs_config\n");
if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
goto failed;
@@ -217,14 +197,16 @@ static int sl811_cs_config(struct pcmcia_device *link)
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
goto failed;
- if (link->conf.Attributes & CONF_ENABLE_IRQ)
- CS_CHECK(RequestIRQ,
- pcmcia_request_irq(link, &link->irq));
- else
+ if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+ } else
goto failed;
- CS_CHECK(RequestConfiguration,
- pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
sprintf(dev->node.dev_name, driver_name);
dev->node.major = dev->node.minor = 0;
@@ -241,8 +223,6 @@ static int sl811_cs_config(struct pcmcia_device *link)
if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
< 0) {
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
printk(KERN_WARNING "sl811_cs_config failed\n");
sl811_cs_release(link);
--
1.6.0.4
^ permalink raw reply related [flat|nested] 31+ messages in thread* Re: [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-24 19:43 ` [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers) Dominik Brodowski
@ 2009-10-26 6:42 ` Artem Bityutskiy
2009-10-26 7:13 ` Dominik Brodowski
0 siblings, 1 reply; 31+ messages in thread
From: Artem Bityutskiy @ 2009-10-26 6:42 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: linux-pcmcia, linux-mtd, linux-usb
On Sat, 2009-10-24 at 21:43 +0200, Dominik Brodowski wrote:
> Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
> requiring manual settings of PCMCIA_DEBUG.
>
> Also, remove all usages of the CS_CHECK macro and replace them with proper
> Linux style calling and return value checking. The extra error reporting may
> be dropped, as the PCMCIA core already complains about any (non-driver-author)
> errors.
>
> CC: linux-mtd@lists.infradead.org
> CC: linux-usb@vger.kernel.org
> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Have you been able to test the driver after the clean-up?
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-26 6:42 ` Artem Bityutskiy
@ 2009-10-26 7:13 ` Dominik Brodowski
2009-10-26 7:26 ` Artem Bityutskiy
0 siblings, 1 reply; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-26 7:13 UTC (permalink / raw)
To: Artem Bityutskiy; +Cc: linux-pcmcia, linux-mtd, linux-usb
Hey,
On Mon, Oct 26, 2009 at 08:42:11AM +0200, Artem Bityutskiy wrote:
> On Sat, 2009-10-24 at 21:43 +0200, Dominik Brodowski wrote:
> > Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
> > requiring manual settings of PCMCIA_DEBUG.
> >
> > Also, remove all usages of the CS_CHECK macro and replace them with proper
> > Linux style calling and return value checking. The extra error reporting may
> > be dropped, as the PCMCIA core already complains about any (non-driver-author)
> > errors.
> >
> > CC: linux-mtd@lists.infradead.org
> > CC: linux-usb@vger.kernel.org
> > Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
>
> Have you been able to test the driver after the clean-up?
No, I don't have all that much PCMCIA hardware -- and specifically none for
the drivers which were modified in this patch (parport, ixj-telephony,
sl811; pcmcia_mtd is marked broken anyway).
Best,
Dominik
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-26 7:13 ` Dominik Brodowski
@ 2009-10-26 7:26 ` Artem Bityutskiy
2009-10-26 7:56 ` Dominik Brodowski
2009-10-26 10:19 ` Alan Cox
0 siblings, 2 replies; 31+ messages in thread
From: Artem Bityutskiy @ 2009-10-26 7:26 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: linux-pcmcia, linux-mtd, linux-usb
On Mon, 2009-10-26 at 08:13 +0100, Dominik Brodowski wrote:
> Hey,
>
> On Mon, Oct 26, 2009 at 08:42:11AM +0200, Artem Bityutskiy wrote:
> > On Sat, 2009-10-24 at 21:43 +0200, Dominik Brodowski wrote:
> > > Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of
> > > requiring manual settings of PCMCIA_DEBUG.
> > >
> > > Also, remove all usages of the CS_CHECK macro and replace them with proper
> > > Linux style calling and return value checking. The extra error reporting may
> > > be dropped, as the PCMCIA core already complains about any (non-driver-author)
> > > errors.
> > >
> > > CC: linux-mtd@lists.infradead.org
> > > CC: linux-usb@vger.kernel.org
> > > Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
> >
> > Have you been able to test the driver after the clean-up?
>
> No, I don't have all that much PCMCIA hardware -- and specifically none for
> the drivers which were modified in this patch (parport, ixj-telephony,
> sl811; pcmcia_mtd is marked broken anyway).
This driver is old and ugly, and it is even possible that no one uses it
anymore, so I guess getting clean-ups without testing is ok for it.
However, in that case the clean-up patches should be reviewable, which I
wouldn't say about your patch :-)
Could you please split it on several smaller patches, each doing one
thing only?
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-26 7:26 ` Artem Bityutskiy
@ 2009-10-26 7:56 ` Dominik Brodowski
2009-10-26 8:05 ` Artem Bityutskiy
2009-10-26 10:19 ` Alan Cox
1 sibling, 1 reply; 31+ messages in thread
From: Dominik Brodowski @ 2009-10-26 7:56 UTC (permalink / raw)
To: Artem Bityutskiy; +Cc: linux-pcmcia, linux-mtd, linux-usb
On Mon, Oct 26, 2009 at 09:26:31AM +0200, Artem Bityutskiy wrote:
> > No, I don't have all that much PCMCIA hardware -- and specifically none for
> > the drivers which were modified in this patch (parport, ixj-telephony,
> > sl811; pcmcia_mtd is marked broken anyway).
>
> This driver is old and ugly, and it is even possible that no one uses it
> anymore, so I guess getting clean-ups without testing is ok for it.
Which one are you referring to specifically?
> However, in that case the clean-up patches should be reviewable, which I
> wouldn't say about your patch :-)
It are "only" 46 line changes max per driver?
> Could you please split it on several smaller patches, each doing one
> thing only?
Well, I could split up the -- related -- CS_CHECK() and dev_dbg() parts if
_really_ necessary.
Best,
Dominik
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-26 7:56 ` Dominik Brodowski
@ 2009-10-26 8:05 ` Artem Bityutskiy
0 siblings, 0 replies; 31+ messages in thread
From: Artem Bityutskiy @ 2009-10-26 8:05 UTC (permalink / raw)
To: Dominik Brodowski; +Cc: linux-pcmcia, linux-mtd, linux-usb
On Mon, 2009-10-26 at 08:56 +0100, Dominik Brodowski wrote:
> On Mon, Oct 26, 2009 at 09:26:31AM +0200, Artem Bityutskiy wrote:
> > > No, I don't have all that much PCMCIA hardware -- and specifically none for
> > > the drivers which were modified in this patch (parport, ixj-telephony,
> > > sl811; pcmcia_mtd is marked broken anyway).
> >
> > This driver is old and ugly, and it is even possible that no one uses it
> > anymore, so I guess getting clean-ups without testing is ok for it.
>
> Which one are you referring to specifically?
Actually I referred to pcmciamtd. I was confused a little, sorry.
> > However, in that case the clean-up patches should be reviewable, which I
> > wouldn't say about your patch :-)
>
> It are "only" 46 line changes max per driver?
>
> > Could you please split it on several smaller patches, each doing one
> > thing only?
>
> Well, I could split up the -- related -- CS_CHECK() and dev_dbg() parts if
> _really_ necessary.
I cannot comment about "_really_", this is just what I personally think
would be a good idea, up to you.
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-26 7:26 ` Artem Bityutskiy
2009-10-26 7:56 ` Dominik Brodowski
@ 2009-10-26 10:19 ` Alan Cox
2009-10-26 10:18 ` Artem Bityutskiy
1 sibling, 1 reply; 31+ messages in thread
From: Alan Cox @ 2009-10-26 10:19 UTC (permalink / raw)
To: dedekind1; +Cc: linux-pcmcia, linux-mtd, linux-usb, Dominik Brodowski
> > No, I don't have all that much PCMCIA hardware -- and specifically none for
> > the drivers which were modified in this patch (parport, ixj-telephony,
> > sl811; pcmcia_mtd is marked broken anyway).
>
> This driver is old and ugly, and it is even possible that no one uses it
> anymore, so I guess getting clean-ups without testing is ok for it.
> However, in that case the clean-up patches should be reviewable, which I
> wouldn't say about your patch :-)
>
> Could you please split it on several smaller patches, each doing one
> thing only?
pcmcia_mtd has been marked broken for how long - better to delete it ?
It's in the git history if anyone ever wants to resurrect it.
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-26 10:19 ` Alan Cox
@ 2009-10-26 10:18 ` Artem Bityutskiy
2009-11-03 8:37 ` Artem Bityutskiy
2009-11-04 10:20 ` PETEC 2MB SRAM Pep Talens
0 siblings, 2 replies; 31+ messages in thread
From: Artem Bityutskiy @ 2009-10-26 10:18 UTC (permalink / raw)
To: Alan Cox, 'David Woodhouse'
Cc: linux-pcmcia, linux-mtd, linux-usb, Dominik Brodowski
On Mon, 2009-10-26 at 10:19 +0000, Alan Cox wrote:
> > > No, I don't have all that much PCMCIA hardware -- and specifically none for
> > > the drivers which were modified in this patch (parport, ixj-telephony,
> > > sl811; pcmcia_mtd is marked broken anyway).
> >
> > This driver is old and ugly, and it is even possible that no one uses it
> > anymore, so I guess getting clean-ups without testing is ok for it.
> > However, in that case the clean-up patches should be reviewable, which I
> > wouldn't say about your patch :-)
> >
> > Could you please split it on several smaller patches, each doing one
> > thing only?
>
> pcmcia_mtd has been marked broken for how long - better to delete it ?
> It's in the git history if anyone ever wants to resurrect it.
I do not have objections. David?
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: [PATCH 14/16] pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (misc drivers)
2009-10-26 10:18 ` Artem Bityutskiy
@ 2009-11-03 8:37 ` Artem Bityutskiy
2009-11-07 11:19 ` pcmciamtd -- what's broken, who needs it? Dominik Brodowski
2009-11-04 10:20 ` PETEC 2MB SRAM Pep Talens
1 sibling, 1 reply; 31+ messages in thread
From: Artem Bityutskiy @ 2009-11-03 8:37 UTC (permalink / raw)
To: Alan Cox
Cc: linux-mtd, linux-pcmcia, 'David Woodhouse', linux-usb,
Dominik Brodowski
On Mon, 2009-10-26 at 12:18 +0200, Artem Bityutskiy wrote:
> On Mon, 2009-10-26 at 10:19 +0000, Alan Cox wrote:
> > > > No, I don't have all that much PCMCIA hardware -- and specifically none for
> > > > the drivers which were modified in this patch (parport, ixj-telephony,
> > > > sl811; pcmcia_mtd is marked broken anyway).
> > >
> > > This driver is old and ugly, and it is even possible that no one uses it
> > > anymore, so I guess getting clean-ups without testing is ok for it.
> > > However, in that case the clean-up patches should be reviewable, which I
> > > wouldn't say about your patch :-)
> > >
> > > Could you please split it on several smaller patches, each doing one
> > > thing only?
> >
> > pcmcia_mtd has been marked broken for how long - better to delete it ?
> > It's in the git history if anyone ever wants to resurrect it.
>
> I do not have objections. David?
I suggest to interpret the silence as "ok", go ahead and remove it.
Dominik, do you care enough to send a patch?
--
Best Regards,
Artem Bityutskiy (Артём Битюцкий)
^ permalink raw reply [flat|nested] 31+ messages in thread
* pcmciamtd -- what's broken, who needs it?
2009-11-03 8:37 ` Artem Bityutskiy
@ 2009-11-07 11:19 ` Dominik Brodowski
2009-11-07 11:29 ` Komuro
2009-11-07 22:33 ` Komuro
0 siblings, 2 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-11-07 11:19 UTC (permalink / raw)
To: Artem Bityutskiy, Pep Talens
Cc: 'David Woodhouse', linux-pcmcia, linux-mtd, Alan Cox
Hey,
it seems that just as we were preparing to move pcmciamtd to staging, an
user who still tries to use it has appeared:
> ATTR{modalias}=="pcmcia:m0000c0000f00fn00pfn00paEBF91155pb805360CApc00000000pd00000000"
> ATTR{prod_id2}==" 2MB SRAM CARD"
> ATTR{prod_id1}=="PRETEC"
> ATTR{pm_state}=="on"
> ATTR{function}=="0x00"
So, what is actually BROKEN with pcmciamtd.c ?
Best,
Dominik
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: pcmciamtd -- what's broken, who needs it?
2009-11-07 11:19 ` pcmciamtd -- what's broken, who needs it? Dominik Brodowski
@ 2009-11-07 11:29 ` Komuro
2009-11-07 11:33 ` Dominik Brodowski
2009-11-07 22:33 ` Komuro
1 sibling, 1 reply; 31+ messages in thread
From: Komuro @ 2009-11-07 11:29 UTC (permalink / raw)
To: Dominik Brodowski
Cc: Artem Bityutskiy, Pep Talens, linux-pcmcia, linux-mtd,
'David Woodhouse', Alan Cox
Hi,
staging directory is not the place for broken driver,
is it?
>Hey,
>
>it seems that just as we were preparing to move pcmciamtd to staging, an
>user who still tries to use it has appeared:
>
>> ATTR{modalias}=="pcmcia:m0000c0000f00fn00pfn00paEBF91155pb805360CApc0000000
0pd00000000"
>> ? ? ATTR{prod_id2}==" ?2MB SRAM CARD"
>> ? ? ATTR{prod_id1}=="PRETEC"
>> ? ? ATTR{pm_state}=="on"
>> ? ? ATTR{function}=="0x00"
>
>So, what is actually BROKEN with pcmciamtd.c ?
Best Regards
Komuro
^ permalink raw reply [flat|nested] 31+ messages in thread* Re: pcmciamtd -- what's broken, who needs it?
2009-11-07 11:29 ` Komuro
@ 2009-11-07 11:33 ` Dominik Brodowski
2009-11-07 16:57 ` Kristoffer Ericson
0 siblings, 1 reply; 31+ messages in thread
From: Dominik Brodowski @ 2009-11-07 11:33 UTC (permalink / raw)
To: Komuro
Cc: Artem Bityutskiy, Pep Talens, linux-pcmcia, linux-mtd,
'David Woodhouse', Alan Cox
Hey,
On Sat, Nov 07, 2009 at 08:29:09PM +0900, Komuro wrote:
> staging directory is not the place for broken driver,
> is it?
It is becoming the place for drivers on their way out of the kernel tree.
An indication for drivers being unused is that they have been marked broken
or obsolete for a loooong time; and then they'll remain in staging for 3
releases or so before being removed (or being moved in again).
Best,
Dominik
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: pcmciamtd -- what's broken, who needs it?
2009-11-07 11:33 ` Dominik Brodowski
@ 2009-11-07 16:57 ` Kristoffer Ericson
2009-11-08 8:12 ` Dominik Brodowski
0 siblings, 1 reply; 31+ messages in thread
From: Kristoffer Ericson @ 2009-11-07 16:57 UTC (permalink / raw)
To: Dominik Brodowski
Cc: Komuro, Artem Bityutskiy, Pep Talens, linux-pcmcia, linux-mtd,
'David Woodhouse', Alan Cox
On Sat, 7 Nov 2009 12:33:46 +0100
Dominik Brodowski <linux@dominikbrodowski.net> wrote:
> Hey,
>
> On Sat, Nov 07, 2009 at 08:29:09PM +0900, Komuro wrote:
> > staging directory is not the place for broken driver,
> > is it?
>
>
> It is becoming the place for drivers on their way out of the kernel tree.
> An indication for drivers being unused is that they have been marked broken
> or obsolete for a loooong time; and then they'll remain in staging for 3
> releases or so before being removed (or being moved in again).
Is the 3 releases a fixed date? Got a couple of drivers in there
that I "might" want to use in the near future. Just havent had time to
looking at cleaning them up.
>
> Best,
> Dominik
>
> _______________________________________________
> Linux PCMCIA reimplementation list
> http://lists.infradead.org/mailman/listinfo/linux-pcmcia
--
Kristoffer Ericson <kristoffer.ericson@gmail.com>
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: pcmciamtd -- what's broken, who needs it?
2009-11-07 16:57 ` Kristoffer Ericson
@ 2009-11-08 8:12 ` Dominik Brodowski
0 siblings, 0 replies; 31+ messages in thread
From: Dominik Brodowski @ 2009-11-08 8:12 UTC (permalink / raw)
To: Kristoffer Ericson, gregkh
Cc: Komuro, Artem Bityutskiy, Pep Talens, linux-pcmcia, linux-mtd,
'David Woodhouse', Alan Cox
Hey,
On Sat, Nov 07, 2009 at 05:57:51PM +0100, Kristoffer Ericson wrote:
> On Sat, 7 Nov 2009 12:33:46 +0100
> Dominik Brodowski <linux@dominikbrodowski.net> wrote:
> > On Sat, Nov 07, 2009 at 08:29:09PM +0900, Komuro wrote:
> > > staging directory is not the place for broken driver,
> > > is it?
> >
> >
> > It is becoming the place for drivers on their way out of the kernel tree.
> > An indication for drivers being unused is that they have been marked broken
> > or obsolete for a loooong time; and then they'll remain in staging for 3
> > releases or so before being removed (or being moved in again).
>
> Is the 3 releases a fixed date? Got a couple of drivers in there
> that I "might" want to use in the near future. Just havent had time to
> looking at cleaning them up.
IIRC it's 3 releases of inaction before there's the intention to remove the
drivers. But for the details of these rules (which probably aren't black and
white) you should ask the maintainer of linux-staging :)
Best,
Dominik
^ permalink raw reply [flat|nested] 31+ messages in thread
* Re: pcmciamtd -- what's broken, who needs it?
2009-11-07 11:19 ` pcmciamtd -- what's broken, who needs it? Dominik Brodowski
2009-11-07 11:29 ` Komuro
@ 2009-11-07 22:33 ` Komuro
1 sibling, 0 replies; 31+ messages in thread
From: Komuro @ 2009-11-07 22:33 UTC (permalink / raw)
To: Dominik Brodowski
Cc: Artem Bityutskiy, Pep Talens, linux-pcmcia, linux-mtd,
'David Woodhouse', Alan Cox
Hi,
At least, we need to add one line below to pcmciamtd.c .
PCMCIA_DEVICE_PROD_ID12("PRETEC", " 2MB SRAM CARD", 0xebf91155, 0x805360ca
),
>Hey,
>
>it seems that just as we were preparing to move pcmciamtd to staging, an
>user who still tries to use it has appeared:
>
>> ATTR{modalias}=="pcmcia:m0000c0000f00fn00pfn00paEBF91155pb805360CApc0000000
0pd00000000"
>> ? ? ATTR{prod_id2}==" ?2MB SRAM CARD"
>> ? ? ATTR{prod_id1}=="PRETEC"
>> ? ? ATTR{pm_state}=="on"
>> ? ? ATTR{function}=="0x00"
>
>So, what is actually BROKEN with pcmciamtd.c ?
>
>Best,
> Dominik
>
>_______________________________________________
>Linux PCMCIA reimplementation list
>http://lists.infradead.org/mailman/listinfo/linux-pcmcia
^ permalink raw reply [flat|nested] 31+ messages in thread
* PETEC 2MB SRAM
@ 2009-11-04 10:20 ` Pep Talens
0 siblings, 0 replies; 31+ messages in thread
From: Pep Talens @ 2009-11-04 10:20 UTC (permalink / raw)
To: linux-pcmcia; +Cc: linux-mtd
Hi,
this is my scenario:
Laptop: BenQ Joybook A33E
OS: OpenSuse 10.2
Kernel: 2.6.18.8-0.13-default
PCMCIA Card: PRETEC 2MB SRAM
http://pan8.fotovista.com/dev/8/6/03573268/l_03573268.jpg
pcmcia-cs version: 3.2.8
Socket: yenta-socket
IRQ: 169
After reading the Howto, mini-howto and some other stuff I still trying to
figure out how to mount it and write in. Sorry if redundant but I'm a little
lost. I can provide the output of some commands:
Monk:/opt/pcmcia-cs-3.2.8/cardmgr #
udevinfo -a -p /sys/bus/pcmcia/devices/0.0
Udevinfo starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:1e.0/0000:01:02.0/0.0':
KERNEL=="0.0"
SUBSYSTEM=="pcmcia"
DRIVER==""
ATTR{modalias}=="pcmcia:m0000c0000f00fn00pfn00paEBF91155pb805360CApc00000000pd00000000"
ATTR{prod_id2}==" 2MB SRAM CARD"
ATTR{prod_id1}=="PRETEC"
ATTR{pm_state}=="on"
ATTR{function}=="0x00"
looking at parent device '/devices/pci0000:00/0000:00:1e.0/0000:01:02.0':
KERNELS=="0000:01:02.0"
SUBSYSTEMS=="pci"
DRIVERS=="yenta_cardbus"
ATTRS{broken_parity_status}=="0"
ATTRS{enable}=="1"
ATTRS{modalias}=="pci:v0000104Cd00008031sv00001071sd00008048bc06sc07i00"
ATTRS{local_cpus}=="ffffffff"
ATTRS{irq}=="169"
ATTRS{class}=="0x060700"
ATTRS{subsystem_device}=="0x8048"
ATTRS{subsystem_vendor}=="0x1071"
ATTRS{device}=="0x8031"
ATTRS{vendor}=="0x104c"
looking at parent device '/devices/pci0000:00/0000:00:1e.0':
KERNELS=="0000:00:1e.0"
SUBSYSTEMS=="pci"
DRIVERS==""
ATTRS{broken_parity_status}=="0"
ATTRS{enable}=="1"
ATTRS{modalias}=="pci:v00008086d00002448sv00000000sd00000000bc06sc04i01"
ATTRS{local_cpus}=="ffffffff"
ATTRS{irq}=="0"
ATTRS{class}=="0x060401"
ATTRS{subsystem_device}=="0x0000"
ATTRS{subsystem_vendor}=="0x0000"
ATTRS{device}=="0x2448"
ATTRS{vendor}=="0x8086"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
Monk:/opt/pcmcia-cs-3.2.8/cardmgr # cat /proc/interrupts
CPU0
0: 3803200 IO-APIC-edge timer
1: 44 IO-APIC-edge i8042
8: 2 IO-APIC-edge rtc
9: 22488 IO-APIC-level acpi
12: 1044 IO-APIC-edge i8042
14: 559838 IO-APIC-edge libata
15: 168263 IO-APIC-edge libata
169: 6 IO-APIC-level yenta
177: 3 IO-APIC-level uhci_hcd:usb2, ohci1394
193: 149076 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb4
201: 0 IO-APIC-level uhci_hcd:usb3
209: 865 IO-APIC-level HDA Intel
217: 3688954 IO-APIC-level eth0
NMI: 0
LOC: 3820527
ERR: 0
MIS: 0
Monk:/proc/bus/pccard # cardctl config
Socket 0:
Vcc 5.0V Vpp1 5.0V Vpp2 5.0V
Monk:/proc/bus/pccard # cardctl ident
Socket 0:
product info: "PRETEC", " 2MB SRAM CARD", "", ""
But I guess that this card is not supported in /etc/pcmcia/config. More over,
I can see this in /var/log/messages:
Oct 29 09:11:47 Monk cardmgr[5688]: could not adjust resource: IO ports
0x100-0x3af: Function not implemented
Oct 29 09:11:47 Monk cardmgr[5688]: could not adjust resource: IO ports
0x3e0-0x4ff: Function not implemented
Oct 29 09:11:47 Monk cardmgr[5688]: could not adjust resource: IO ports
0x820-0x8ff: Function not implemented
Oct 29 09:11:47 Monk cardmgr[5688]: could not adjust resource: IO ports
0xc00-0xcf7: Function not implemented
Oct 29 09:11:47 Monk cardmgr[5688]: could not adjust resource: memory
0xc0000-0xfffff: Function not implemented
Oct 29 09:11:47 Monk cardmgr[5688]: could not adjust resource: memory
0xa0000000-0xa0ffffff: Function not implemented
Oct 29 09:11:47 Monk cardmgr[5688]: could not adjust resource: memory
0x60000000-0x60ffffff: Function not implemented
Oct 29 09:11:47 Monk cardmgr[5688]: could not adjust resource: IO ports
0xa00-0xaff: Function not implemented
Oct 29 09:11:47 Monk cardmgr[5689]: unsupported card in socket 0
Oct 29 09:11:47 Monk cardmgr[5689]: product info: "PRETEC", " 2MB SRAM
CARD", "", ""
After see this, as you will guess, my config.opts is:
include port 0x100-0x3af
include port 0x3e0-0x4ff
include port 0x820-0x8ff
include port 0xc00-0xcf7
include memory 0xc0000-0xfffff
include memory 0xa0000000-0xa0ffffff
include memory 0x60000000-0x60ffffff
Now I'm trying to migrate from cardmgr to pcmciautils but I don't know if
after migration I'll be able to make this card writable. Am I in the right
way? Could someone guide me?
Thank you very much
--
Pep Talens
Wincor-Nixdorf
46022 Valencia (Spain)
Tel. +34 902 15 38 27 Ext. 117
pep.talens@f1-connecting.com
^ permalink raw reply [flat|nested] 31+ messages in thread
