From: "J.A. Magallón" <jamagallon@ono.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.17-mm6
Date: Wed, 5 Jul 2006 23:43:47 +0200 [thread overview]
Message-ID: <20060705234347.47ef2600@werewolf.auna.net> (raw)
In-Reply-To: <20060703030355.420c7155.akpm@osdl.org>
On Mon, 3 Jul 2006 03:03:55 -0700, Andrew Morton <akpm@osdl.org> wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17/2.6.17-mm6/
>
>
> - A major update to the e1000 driver.
>
Doesn't find my root drive :(.
Its a SATA drive, on PIIX.
Last -mm I tried ('cause of the raid problems) was -mm1, so I don't know
when did this broke. Under -mm1, the disk is this:
libata version 1.30 loaded.
ata_piix 0000:00:1f.2: version 1.10tj1ac3
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 16
ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 16
scsi0 : ata_piix
ata1: ENTER, pcs=0x13 base=0
ata1: LEAVE, pcs=0x13 present_mask=0x1
ata1.00: cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
ata1.00: ATA-6, max UDMA/133, 390721968 sectors: LBA48
ata1.00: configured for UDMA/133
scsi1 : ata_piix
ata2: ENTER, pcs=0x13 base=2
ata2: LEAVE, pcs=0x11 present_mask=0x0
ata2: SATA port has no device.
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
With -mm6, the kernel doesn't find it. I get this on boot:
kinit: try_name sda,1 = dev(8,1)
kinit: name_to_dev_t(/dev/sda1) = dev(8.1)
kinit: root_dev = dev(8,1)
kinit: failed to identify filesystem /dev/root, trying all
kinit: trying to mount /dev/root on /root with type ext3
kinit: Cannot open root device dev(8,1)
I have tried to get this message from -mm1, but could not get it in any log.
But... I remember to see that the boot message is like:
kinit: try_name sda,1 = sda1(8,1)
^^^^
I have verified I built -mm6 with ext3,sata-piix and so on, all builtin.
Any ideas ?
TIA
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2007.0 (Cooker) for i586
Linux 2.6.17-jam01 (gcc 4.1.1 20060518 (prerelease)) #2 SMP PREEMPT Wed
next prev parent reply other threads:[~2006-07-05 21:43 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-03 10:03 2.6.17-mm6 Andrew Morton
2006-07-03 10:50 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 10:56 ` 2.6.17-mm6 Andrew Morton
2006-07-03 11:36 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 12:27 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 13:28 ` 2.6.17-mm6 Dmitry Torokhov
2006-07-03 11:00 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 11:25 ` 2.6.17-mm6 Andrew Morton
2006-07-03 12:34 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 11:39 ` 2.6.17-mm6 Andrew Morton
2006-07-03 11:41 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 12:10 ` 2.6.17-mm6 Andrew Morton
2006-07-03 13:36 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 20:21 ` 2.6.17-mm6 Andrew Morton
2006-07-03 20:31 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 12:29 ` 2.6.17-mm6 Sergey Vlasov
2006-07-03 17:25 ` 2.6.17-mm6 Jeremy Fitzhardinge
2006-07-03 19:01 ` 2.6.17-mm6 Andrew Morton
2006-07-03 12:15 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 12:17 ` 2.6.17-mm6 Heiko Carstens
2006-07-03 13:08 ` 2.6.17-mm6 Martin Peschke
2006-07-03 13:12 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 12:15 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 14:09 ` 2.6.17-mm6 Theodore Tso
2006-07-03 19:07 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:37 ` 2.6.17-mm6 Andrew Morton
2006-07-03 19:43 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:27 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:39 ` 2.6.17-mm6 Andrew Morton
2006-07-03 19:56 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 20:17 ` 2.6.17-mm6 Andrew Morton
2006-07-03 20:36 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 20:54 ` 2.6.17-mm6 Andrew Morton
2006-07-03 21:50 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 23:31 ` 2.6.17-mm6 Andrew Morton
2006-07-04 8:34 ` 2.6.17-mm6 Alistair John Strachan
2006-07-04 8:49 ` 2.6.17-mm6 Andrew Morton
2006-07-04 16:28 ` 2.6.17-mm6 Alistair John Strachan
2006-07-05 20:37 ` 2.6.17-mm6 john stultz
2006-07-05 20:46 ` 2.6.17-mm6 Greg KH
2006-07-05 22:32 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 17:31 ` 2.6.17-mm6 john stultz
2006-07-06 19:06 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 19:16 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 20:02 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 20:11 ` 2.6.17-mm6 Greg KH
2006-07-07 20:48 ` 2.6.17-mm6 Alistair John Strachan
2006-07-08 16:02 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 22:10 ` 2.6.17-mm6 Anton Blanchard
2006-07-04 19:53 ` 2.6.17-mm6 Rafael J. Wysocki
2006-07-04 20:01 ` 2.6.17-mm6 Arjan van de Ven
2006-07-05 10:27 ` 2.6.17-mm6 Stefan Richter
2006-07-05 10:36 ` 2.6.17-mm6 Stefan Richter
2006-07-05 11:13 ` 2.6.17-mm6 Ingo Molnar
2006-07-05 21:43 ` J.A. Magallón [this message]
2006-07-05 22:56 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:57 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 0:02 ` 2.6.17-mm6 Andrew Morton
2006-07-06 14:36 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 14:48 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 21:44 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 21:57 ` 2.6.17-mm6 Andrew Morton
2006-07-07 15:38 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 16:02 ` 2.6.17-mm6 Alan Cox
2006-07-07 15:55 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 16:44 ` 2.6.17-mm6 Alan Cox
2006-07-07 16:34 ` 2.6.17-mm6 Randy.Dunlap
2006-07-07 17:09 ` 2.6.17-mm6 Alan Cox
2006-07-07 17:14 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 17:22 ` 2.6.17-mm6 David Lloyd
2006-07-07 17:23 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 17:44 ` 2.6.17-mm6 Alan Cox
2006-07-07 17:39 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:03 ` 2.6.17-mm6 Alan Cox
2006-07-07 19:59 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:23 ` 2.6.17-mm6 Alan Cox
2006-07-07 20:14 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:42 ` 2.6.17-mm6 Alan Cox
2006-07-07 20:37 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 21:09 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 21:11 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 21:40 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 23:26 ` 2.6.17-mm6 (try-3) Randy.Dunlap
[not found] ` <a762e240607051447x3c3c6e15k9cdb38804cf13f35@mail.gmail.com>
2006-07-05 22:50 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:28 ` 2.6.17-mm6 Keith Mannthey
2006-07-05 23:44 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:48 ` 2.6.17-mm6 Andrew Morton
2006-07-06 0:05 ` 2.6.17-mm6 Keith Mannthey
2006-07-06 0:25 ` 2.6.17-mm6 Andrew Morton
2006-07-06 5:42 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 5:59 ` 2.6.17-mm6 Andrew Morton
2006-07-06 6:31 ` 2.6.17-mm6 Andrew Morton
2006-07-06 7:18 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 7:25 ` 2.6.17-mm6 Ingo Molnar
2006-07-06 8:21 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 8:26 ` 2.6.17-mm6 Ingo Molnar
2006-07-06 7:31 ` 2.6.17-mm6 Arjan van de Ven
2006-07-06 16:37 ` 2.6.17-mm6 Valdis.Kletnieks
2006-07-06 16:49 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 6:40 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 7:38 ` 2.6.17-mm6 vmstat breakage Mike Galbraith
2006-07-06 8:24 ` Andrew Morton
2006-07-06 17:16 ` 2.6.17-mm6 Andi Kleen
2006-07-12 3:55 ` 2.6.17-mm6 Steven Rostedt
2006-07-06 20:36 ` [-mm patch] drivers/edac/: make code static Adrian Bunk
2006-07-06 20:37 ` [Ocfs2-devel] [-mm patch] fs/ocfs2/inode.c:ocfs2_refresh_inode(): remove unused variable Adrian Bunk
2006-07-06 20:37 ` Adrian Bunk
2006-07-06 20:43 ` [Ocfs2-devel] " Mark Fasheh
2006-07-06 20:43 ` Mark Fasheh
2006-07-06 20:37 ` [-mm patch] reiserfs: warn about the useless nolargeio option Adrian Bunk
2006-07-07 0:35 ` Hans Reiser
2006-07-06 20:37 ` [-mm patch] drivers/net/e1000/: possible cleanups Adrian Bunk
2006-07-06 20:47 ` Auke Kok
2006-07-07 7:35 ` Adrian Bunk
2006-07-07 9:17 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 9:35 ` 2.6.17-mm6 Andrew Morton
2006-07-07 21:15 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 21:38 ` 2.6.17-mm6 Andrew Morton
2006-07-07 21:42 ` 2.6.17-mm6 Martin Bligh
2006-07-07 23:06 ` 2.6.17-mm6 Andrew Morton
2006-07-08 3:46 ` 2.6.17-mm6 Badari Pulavarty
2006-07-07 23:08 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 15:24 ` 2.6.17-mm6 Reuben Farrelly
2006-07-08 20:20 ` 2.6.17-mm6: kernel/sysctl.c: PROC_FS=n compile error Adrian Bunk
2006-07-09 18:52 ` Serge E. Hallyn
2006-07-09 23:33 ` Adrian Bunk
2006-07-10 14:22 ` Serge E. Hallyn
2006-07-10 15:08 ` Serge E. Hallyn
-- strict thread matches above, loose matches on Subject: below --
2006-07-03 10:03 2.6.17-mm6 Andrew Morton
2006-07-07 14:21 2.6.17-mm6 Martin J. Bligh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060705234347.47ef2600@werewolf.auna.net \
--to=jamagallon@ono.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.