From: Reuben Farrelly <reuben-lkml@reub.net>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, greg@kroah.com, brice@myri.com
Subject: Re: 2.6.17-mm6
Date: Mon, 03 Jul 2006 23:41:42 +1200 [thread overview]
Message-ID: <44A90276.4050108@reub.net> (raw)
In-Reply-To: <20060703043954.0807c3f2.akpm@osdl.org>
On 3/07/2006 11:39 p.m., Andrew Morton wrote:
> On Mon, 03 Jul 2006 23:00:34 +1200
> Reuben Farrelly <reuben-lkml@reub.net> wrote:
>
>> Allocate Port Service[0000:00:1c.0:pcie0]
>> Allocate Port Service[0000:00:1c.0:pcie0]
>
> Could we have the full dmesg please?
Sure:
Bootdata ok (command line is ro root=/dev/md0 panic=60 console=ttyS0,57600)
Linux version 2.6.17-mm6 (root@tornado.reub.net) (gcc version 4.1.1 20060629
(Red Hat 4.1.1-6)) #1 SMP Mon Jul 3 22:47:46 NZST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
BIOS-e820: 000000003f670000 - 000000003f6e9000 (ACPI NVS)
BIOS-e820: 000000003f6e9000 - 000000003f6ec000 (usable)
BIOS-e820: 000000003f6ec000 - 000000003f6ff000 (ACPI data)
BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
DMI 2.3 present.
ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020
ACPI: RSDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fde48
ACPI: FADT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fcf10
ACPI: MADT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fce10
ACPI: WDDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6f90
ACPI: MCFG (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6f10
ACPI: ASF! (v032 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fcd10
ACPI: HPET (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x000000003f6f6e90
ACPI: SSDT (v001 INTEL CpuPm 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fdc10
ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fda10
ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd810
ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd610
ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000f5a MSFT 0x01000013) @ 0x000000003f6fd410
ACPI: TCPA (v001 INTEL TIANO 0x00000002 MSFT 0x01000013) @ 0x000000003f670010
ACPI: DSDT (v001 INTEL D945GNT 0x00000f5a MSFT 0x01000013) @ 0x0000000000000000
On node 0 totalpages: 254541
DMA zone: 2433 pages, LIFO batch:0
DMA32 zone: 252108 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000)
Built 1 zonelists. Total pages: 254541
Kernel command line: ro root=/dev/md0 panic=60 console=ttyS0,57600
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Memory: 1015020k/1039360k available (2582k kernel code, 22812k reserved, 1666k
data, 216k init)
Calibrating delay using timer specific routine.. 6006.43 BogoMIPS (lpj=12012875)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20060623
Using local APIC timer interrupts.
result 12500448
Detected 12.500 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 6000.21 BogoMIPS (lpj=12000420)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Brought up 2 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 3000.123 MHz processor.
migration_cost=5
checking if image is initramfs... it is
Freeing initrd memory: 877k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
Intel 82802 RNG detected
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
PCI-GART: No AMD northbridge found.
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 48000000-480fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: disabled.
PREFETCH window: disabled.
Device `[PEX0]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1c.0[A] ->
GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
Device `[PEX2]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1c.2[C] ->
GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
Device `[PEX3]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1c.3[D] ->
GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
Device `[PEX4]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1c.4[A] ->
GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
Device `[PEX5]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1c.5[B] ->
GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1151924044.008:1): initialized
SELinux: Registering netfilter hooks
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie0]
Allocate Port Service[0000:00:1c.0:pcie0]
kobject_add failed for 0000:00:1c.0:pcie0 with -EEXIST, don't try to register
things with the same name in the same directory.
Call Trace:
[<ffffffff80358298>] kobject_put+0x19/0x21
[<ffffffff80358741>] kobject_add+0x181/0x1ac
[<ffffffff803aa378>] device_add+0x88/0x4b9
[<ffffffff803aa7c2>] device_register+0x19/0x27
[<ffffffff80363e90>] pcie_port_device_register+0x3a0/0x3de
[<ffffffff8042fa10>] pcibios_set_master+0x7f/0x86
[<ffffffff80364004>] pcie_portdrv_probe+0x64/0x80
[<ffffffff803612ac>] pci_device_probe+0x4d/0x78
[<ffffffff803ac08f>] driver_probe_device+0x5c/0xb4
[<ffffffff803ac1c9>] __driver_attach+0x67/0xb9
[<ffffffff803ac162>] __driver_attach+0x0/0xb9
[<ffffffff803aba4f>] bus_for_each_dev+0x4f/0x79
[<ffffffff803abfbc>] driver_attach+0x1c/0x1e
[<ffffffff803ab61a>] bus_add_driver+0x7a/0x143
[<ffffffff803ac463>] driver_register+0x9f/0xa6
[<ffffffff80361497>] __pci_register_driver+0x59/0x7e
[<ffffffff806b7a57>] pcie_portdrv_init+0x1c/0x30
[<ffffffff80267f3e>] init+0x14e/0x2d0
[<ffffffff80260a12>] child_rip+0x8/0x12
[<ffffffff80267df0>] init+0x0/0x2d0
[<ffffffff80260a0a>] child_rip+0x0/0x12
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie0]
Allocate Port Service[0000:00:1c.2:pcie0]
kobject_add failed for 0000:00:1c.2:pcie0 with -EEXIST, don't try to register
things with the same name in the same directory.
Call Trace:
[<ffffffff80358298>] kobject_put+0x19/0x21
[<ffffffff80358741>] kobject_add+0x181/0x1ac
[<ffffffff803aa378>] device_add+0x88/0x4b9
[<ffffffff803aa7c2>] device_register+0x19/0x27
[<ffffffff80363e90>] pcie_port_device_register+0x3a0/0x3de
[<ffffffff8042fa10>] pcibios_set_master+0x7f/0x86
[<ffffffff80364004>] pcie_portdrv_probe+0x64/0x80
[<ffffffff803612ac>] pci_device_probe+0x4d/0x78
[<ffffffff803ac08f>] driver_probe_device+0x5c/0xb4
[<ffffffff803ac1c9>] __driver_attach+0x67/0xb9
[<ffffffff803ac162>] __driver_attach+0x0/0xb9
[<ffffffff803aba4f>] bus_for_each_dev+0x4f/0x79
[<ffffffff803abfbc>] driver_attach+0x1c/0x1e
[<ffffffff803ab61a>] bus_add_driver+0x7a/0x143
[<ffffffff803ac463>] driver_register+0x9f/0xa6
[<ffffffff80361497>] __pci_register_driver+0x59/0x7e
[<ffffffff806b7a57>] pcie_portdrv_init+0x1c/0x30
[<ffffffff80267f3e>] init+0x14e/0x2d0
[<ffffffff80260a12>] child_rip+0x8/0x12
[<ffffffff80267df0>] init+0x0/0x2d0
[<ffffffff80260a0a>] child_rip+0x0/0x12
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie0]
Allocate Port Service[0000:00:1c.3:pcie0]
kobject_add failed for 0000:00:1c.3:pcie0 with -EEXIST, don't try to register
things with the same name in the same directory.
Call Trace:
[<ffffffff80358298>] kobject_put+0x19/0x21
[<ffffffff80358741>] kobject_add+0x181/0x1ac
[<ffffffff803aa378>] device_add+0x88/0x4b9
[<ffffffff803aa7c2>] device_register+0x19/0x27
[<ffffffff80363e90>] pcie_port_device_register+0x3a0/0x3de
[<ffffffff8042fa10>] pcibios_set_master+0x7f/0x86
[<ffffffff80364004>] pcie_portdrv_probe+0x64/0x80
[<ffffffff803612ac>] pci_device_probe+0x4d/0x78
[<ffffffff803ac08f>] driver_probe_device+0x5c/0xb4
[<ffffffff803ac1c9>] __driver_attach+0x67/0xb9
[<ffffffff803ac162>] __driver_attach+0x0/0xb9
[<ffffffff803aba4f>] bus_for_each_dev+0x4f/0x79
[<ffffffff803abfbc>] driver_attach+0x1c/0x1e
[<ffffffff803ab61a>] bus_add_driver+0x7a/0x143
[<ffffffff803ac463>] driver_register+0x9f/0xa6
[<ffffffff80361497>] __pci_register_driver+0x59/0x7e
[<ffffffff806b7a57>] pcie_portdrv_init+0x1c/0x30
[<ffffffff80267f3e>] init+0x14e/0x2d0
[<ffffffff80260a12>] child_rip+0x8/0x12
[<ffffffff80267df0>] init+0x0/0x2d0
[<ffffffff80260a0a>] child_rip+0x0/0x12
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie0]
Allocate Port Service[0000:00:1c.4:pcie0]
kobject_add failed for 0000:00:1c.4:pcie0 with -EEXIST, don't try to register
things with the same name in the same directory.
Call Trace:
[<ffffffff80358298>] kobject_put+0x19/0x21
[<ffffffff80358741>] kobject_add+0x181/0x1ac
[<ffffffff803aa378>] device_add+0x88/0x4b9
[<ffffffff803aa7c2>] device_register+0x19/0x27
[<ffffffff80363e90>] pcie_port_device_register+0x3a0/0x3de
[<ffffffff8042fa10>] pcibios_set_master+0x7f/0x86
[<ffffffff80364004>] pcie_portdrv_probe+0x64/0x80
[<ffffffff803612ac>] pci_device_probe+0x4d/0x78
[<ffffffff803ac08f>] driver_probe_device+0x5c/0xb4
[<ffffffff803ac1c9>] __driver_attach+0x67/0xb9
[<ffffffff803ac162>] __driver_attach+0x0/0xb9
[<ffffffff803aba4f>] bus_for_each_dev+0x4f/0x79
[<ffffffff803abfbc>] driver_attach+0x1c/0x1e
[<ffffffff803ab61a>] bus_add_driver+0x7a/0x143
[<ffffffff803ac463>] driver_register+0x9f/0xa6
[<ffffffff80361497>] __pci_register_driver+0x59/0x7e
[<ffffffff806b7a57>] pcie_portdrv_init+0x1c/0x30
[<ffffffff80267f3e>] init+0x14e/0x2d0
[<ffffffff80260a12>] child_rip+0x8/0x12
[<ffffffff80267df0>] init+0x0/0x2d0
[<ffffffff80260a0a>] child_rip+0x0/0x12
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie0]
Allocate Port Service[0000:00:1c.5:pcie0]
kobject_add failed for 0000:00:1c.5:pcie0 with -EEXIST, don't try to register
things with the same name in the same directory.
Call Trace:
[<ffffffff80358298>] kobject_put+0x19/0x21
[<ffffffff80358741>] kobject_add+0x181/0x1ac
[<ffffffff803aa378>] device_add+0x88/0x4b9
[<ffffffff803aa7c2>] device_register+0x19/0x27
[<ffffffff80363e90>] pcie_port_device_register+0x3a0/0x3de
[<ffffffff8042fa10>] pcibios_set_master+0x7f/0x86
[<ffffffff80364004>] pcie_portdrv_probe+0x64/0x80
[<ffffffff803612ac>] pci_device_probe+0x4d/0x78
[<ffffffff803ac08f>] driver_probe_device+0x5c/0xb4
[<ffffffff803ac1c9>] __driver_attach+0x67/0xb9
[<ffffffff803ac162>] __driver_attach+0x0/0xb9
[<ffffffff803aba4f>] bus_for_each_dev+0x4f/0x79
[<ffffffff803abfbc>] driver_attach+0x1c/0x1e
[<ffffffff803ab61a>] bus_add_driver+0x7a/0x143
[<ffffffff803ac463>] driver_register+0x9f/0xa6
[<ffffffff80361497>] __pci_register_driver+0x59/0x7e
[<ffffffff806b7a57>] pcie_portdrv_init+0x1c/0x30
[<ffffffff80267f3e>] init+0x14e/0x2d0
[<ffffffff80260a12>] child_rip+0x8/0x12
[<ffffffff80267df0>] init+0x0/0x2d0
[<ffffffff80260a0a>] child_rip+0x0/0x12
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Getting cpuindex for acpiid 0x3
ACPI: Getting cpuindex for acpiid 0x4
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
0000:06:03.0: ttyS1 at I/O 0x1000 (irq = 19) is a 16550A
0000:06:03.0: ttyS2 at I/O 0x1008 (irq = 19) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 4 RAM disks of 16384K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 7.1.9-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
e1000: 0000:01:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:20:60:b4:23
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
libata version 2.00 loaded.
ahci 0000:00:1f.2: version 2.0
Device `[IDES]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1f.2[B] ->
GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000016100 ctl 0x0 bmdma 0x0 irq 314
ata2: SATA max UDMA/133 cmd 0xFFFFC20000016180 ctl 0x0 bmdma 0x0 irq 314
ata3: SATA max UDMA/133 cmd 0xFFFFC20000016200 ctl 0x0 bmdma 0x0 irq 314
ata4: SATA max UDMA/133 cmd 0xFFFFC20000016280 ctl 0x0 bmdma 0x0 irq 314
scsi0 : ahci
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
Losing some ticks... checking if CPU frequency changed.
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3300622AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 586072368 512-byte hdwr sectors (300069 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 >
sd 2:0:0:0: Attached scsi disk sdc
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
Device `[EHCI]' is not power manageable<6>ACPI: PCI Interrupt 0000:00:1d.7[A] ->
GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x481a0400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.17-mm6 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.17-mm6 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.17-mm6 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.17-mm6 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
usb 2-1: new full speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.17-mm6 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new device found, idVendor=0451, idProduct=2046
usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: new device found, idVendor=046d, idProduct=08b0
usb 3-2: new device strings: Mfr=0, Product=0, SerialNumber=1
usb 3-2: SerialNumber: 01402100A5000000
usb 3-2: configuration #1 chosen from 1 choice
usb 2-1.1: new low speed USB device using uhci_hcd and address 3
usb 2-1.1: new device found, idVendor=050d, idProduct=0105
usb 2-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1: Product: Belkin OmniView KVM Switch
usb 2-1.1: Manufacturer: Belkin Components
usb 2-1.1: configuration #1 chosen from 1 choice
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
input: Belkin Components Belkin OmniView KVM Switch as /class/input/input0
input: USB HID v1.00 Keyboard [Belkin Components Belkin OmniView KVM Switch] on
usb-0000:00:1d.0-1.1
input: Belkin Components Belkin OmniView KVM Switch as /class/input/input1
input: USB HID v1.00 Mouse [Belkin Components Belkin OmniView KVM Switch] on
usb-0000:00:1d.0-1.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
EDAC MC: Ver: 2.0.1 Jul 3 2006
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
Freeing unused kernel memory: 216k freed
md: Autodetecting RAID arrays.
md: invalid raid superblock magic on sda10
md: sda10 has invalid sb, not importing!
md: invalid raid superblock magic on sdc10
md: sdc10 has invalid sb, not importing!
md: autorun ...
md: considering sdc11 ...
md: adding sdc11 ...
md: sdc7 has different UUID to sdc11
md: sdc6 has different UUID to sdc11
md: sdc5 has different UUID to sdc11
md: sdc3 has different UUID to sdc11
md: sdc2 has different UUID to sdc11
md: adding sda11 ...
md: sda7 has different UUID to sdc11
md: sda6 has different UUID to sdc11
md: sda5 has different UUID to sdc11
md: sda3 has different UUID to sdc11
md: sda2 has different UUID to sdc11
md: created md5
md: bind<sda11>
md: bind<sdc11>
md: running: <sdc11><sda11>
raid1: raid set md5 active with 2 out of 2 mirrors
md5: bitmap initialized from disk: read 10/10 pages, set 7 bits, status: 0
created bitmap (153 pages) for device md5
md: considering sdc7 ...
md: adding sdc7 ...
md: sdc6 has different UUID to sdc7
md: sdc5 has different UUID to sdc7
md: sdc3 has different UUID to sdc7
md: sdc2 has different UUID to sdc7
md: adding sda7 ...
md: sda6 has different UUID to sdc7
md: sda5 has different UUID to sdc7
md: sda3 has different UUID to sdc7
md: sda2 has different UUID to sdc7
md: created md4
md: bind<sda7>
md: bind<sdc7>
md: running: <sdc7><sda7>
raid1: raid set md4 active with 2 out of 2 mirrors
md4: bitmap initialized from disk: read 4/4 pages, set 9 bits, status: 0
created bitmap (61 pages) for device md4
md: considering sdc6 ...
md: adding sdc6 ...
md: sdc5 has different UUID to sdc6
md: sdc3 has different UUID to sdc6
md: sdc2 has different UUID to sdc6
md: adding sda6 ...
md: sda5 has different UUID to sdc6
md: sda3 has different UUID to sdc6
md: sda2 has different UUID to sdc6
md: created md3
md: bind<sda6>
md: bind<sdc6>
md: running: <sdc6><sda6>
raid1: raid set md3 active with 2 out of 2 mirrors
md3: bitmap initialized from disk: read 1/1 pages, set 1 bits, status: 0
created bitmap (13 pages) for device md3
md: considering sdc5 ...
md: adding sdc5 ...
md: sdc3 has different UUID to sdc5
md: sdc2 has different UUID to sdc5
md: adding sda5 ...
md: sda3 has different UUID to sdc5
md: sda2 has different UUID to sdc5
md: created md2
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
raid1: raid set md2 active with 2 out of 2 mirrors
md2: bitmap initialized from disk: read 10/10 pages, set 54 bits, status: 0
created bitmap (150 pages) for device md2
md: considering sdc3 ...
md: adding sdc3 ...
md: sdc2 has different UUID to sdc3
md: adding sda3 ...
md: sda2 has different UUID to sdc3
md: created md1
md: bind<sda3>
md: bind<sdc3>
md: running: <sdc3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: bitmap initialized from disk: read 10/10 pages, set 50 bits, status: 0
created bitmap (150 pages) for device md1
md: considering sdc2 ...
md: adding sdc2 ...
md: adding sda2 ...
md: created md0
md: bind<sda2>
md: bind<sdc2>
md: running: <sdc2><sda2>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: bitmap initialized from disk: read 12/12 pages, set 41 bits, status: 0
created bitmap (187 pages) for device md0
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1151924056.656:2): selinux=0 auid=4294967295
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.00 (18-Jun-2006)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on md4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on md5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
ReiserFS: sdc8: found reiserfs format "3.6" with standard journal
ReiserFS: sdc8: using ordered data mode
ReiserFS: sdc8: journal params: device sdc8, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdc8: checking transaction log (sdc8)
ReiserFS: sdc8: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 248968k swap on /dev/sda9. Priority:-1 extents:1 across:248968k
Adding 248968k swap on /dev/sdc9. Priority:-2 extents:1 across:248968k
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4060 buckets, 32480 max) - 288 bytes per conntrack
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
GRE over IPv4 tunneling driver
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present
[root@tornado linux]#
reuben
next prev parent reply other threads:[~2006-07-03 11:42 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-03 10:03 2.6.17-mm6 Andrew Morton
2006-07-03 10:50 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 10:56 ` 2.6.17-mm6 Andrew Morton
2006-07-03 11:36 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 12:27 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 13:28 ` 2.6.17-mm6 Dmitry Torokhov
2006-07-03 11:00 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 11:25 ` 2.6.17-mm6 Andrew Morton
2006-07-03 12:34 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 11:39 ` 2.6.17-mm6 Andrew Morton
2006-07-03 11:41 ` Reuben Farrelly [this message]
2006-07-03 12:10 ` 2.6.17-mm6 Andrew Morton
2006-07-03 13:36 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 20:21 ` 2.6.17-mm6 Andrew Morton
2006-07-03 20:31 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 12:29 ` 2.6.17-mm6 Sergey Vlasov
2006-07-03 17:25 ` 2.6.17-mm6 Jeremy Fitzhardinge
2006-07-03 19:01 ` 2.6.17-mm6 Andrew Morton
2006-07-03 12:15 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 12:17 ` 2.6.17-mm6 Heiko Carstens
2006-07-03 13:08 ` 2.6.17-mm6 Martin Peschke
2006-07-03 13:12 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 12:15 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 14:09 ` 2.6.17-mm6 Theodore Tso
2006-07-03 19:07 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:37 ` 2.6.17-mm6 Andrew Morton
2006-07-03 19:43 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:27 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:39 ` 2.6.17-mm6 Andrew Morton
2006-07-03 19:56 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 20:17 ` 2.6.17-mm6 Andrew Morton
2006-07-03 20:36 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 20:54 ` 2.6.17-mm6 Andrew Morton
2006-07-03 21:50 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 23:31 ` 2.6.17-mm6 Andrew Morton
2006-07-04 8:34 ` 2.6.17-mm6 Alistair John Strachan
2006-07-04 8:49 ` 2.6.17-mm6 Andrew Morton
2006-07-04 16:28 ` 2.6.17-mm6 Alistair John Strachan
2006-07-05 20:37 ` 2.6.17-mm6 john stultz
2006-07-05 20:46 ` 2.6.17-mm6 Greg KH
2006-07-05 22:32 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 17:31 ` 2.6.17-mm6 john stultz
2006-07-06 19:06 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 19:16 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 20:02 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 20:11 ` 2.6.17-mm6 Greg KH
2006-07-07 20:48 ` 2.6.17-mm6 Alistair John Strachan
2006-07-08 16:02 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 22:10 ` 2.6.17-mm6 Anton Blanchard
2006-07-04 19:53 ` 2.6.17-mm6 Rafael J. Wysocki
2006-07-04 20:01 ` 2.6.17-mm6 Arjan van de Ven
2006-07-05 10:27 ` 2.6.17-mm6 Stefan Richter
2006-07-05 10:36 ` 2.6.17-mm6 Stefan Richter
2006-07-05 11:13 ` 2.6.17-mm6 Ingo Molnar
2006-07-05 21:43 ` 2.6.17-mm6 J.A. Magallón
2006-07-05 22:56 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:57 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 0:02 ` 2.6.17-mm6 Andrew Morton
2006-07-06 14:36 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 14:48 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 21:44 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 21:57 ` 2.6.17-mm6 Andrew Morton
2006-07-07 15:38 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 16:02 ` 2.6.17-mm6 Alan Cox
2006-07-07 15:55 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 16:44 ` 2.6.17-mm6 Alan Cox
2006-07-07 16:34 ` 2.6.17-mm6 Randy.Dunlap
2006-07-07 17:09 ` 2.6.17-mm6 Alan Cox
2006-07-07 17:14 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 17:22 ` 2.6.17-mm6 David Lloyd
2006-07-07 17:23 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 17:44 ` 2.6.17-mm6 Alan Cox
2006-07-07 17:39 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:03 ` 2.6.17-mm6 Alan Cox
2006-07-07 19:59 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:23 ` 2.6.17-mm6 Alan Cox
2006-07-07 20:14 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:42 ` 2.6.17-mm6 Alan Cox
2006-07-07 20:37 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 21:09 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 21:11 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 21:40 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 23:26 ` 2.6.17-mm6 (try-3) Randy.Dunlap
[not found] ` <a762e240607051447x3c3c6e15k9cdb38804cf13f35@mail.gmail.com>
2006-07-05 22:50 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:28 ` 2.6.17-mm6 Keith Mannthey
2006-07-05 23:44 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:48 ` 2.6.17-mm6 Andrew Morton
2006-07-06 0:05 ` 2.6.17-mm6 Keith Mannthey
2006-07-06 0:25 ` 2.6.17-mm6 Andrew Morton
2006-07-06 5:42 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 5:59 ` 2.6.17-mm6 Andrew Morton
2006-07-06 6:31 ` 2.6.17-mm6 Andrew Morton
2006-07-06 7:18 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 7:25 ` 2.6.17-mm6 Ingo Molnar
2006-07-06 8:21 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 8:26 ` 2.6.17-mm6 Ingo Molnar
2006-07-06 7:31 ` 2.6.17-mm6 Arjan van de Ven
2006-07-06 16:37 ` 2.6.17-mm6 Valdis.Kletnieks
2006-07-06 16:49 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 6:40 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 7:38 ` 2.6.17-mm6 vmstat breakage Mike Galbraith
2006-07-06 8:24 ` Andrew Morton
2006-07-06 17:16 ` 2.6.17-mm6 Andi Kleen
2006-07-12 3:55 ` 2.6.17-mm6 Steven Rostedt
2006-07-06 20:36 ` [-mm patch] drivers/edac/: make code static Adrian Bunk
2006-07-06 20:37 ` [Ocfs2-devel] [-mm patch] fs/ocfs2/inode.c:ocfs2_refresh_inode(): remove unused variable Adrian Bunk
2006-07-06 20:37 ` Adrian Bunk
2006-07-06 20:43 ` [Ocfs2-devel] " Mark Fasheh
2006-07-06 20:43 ` Mark Fasheh
2006-07-06 20:37 ` [-mm patch] reiserfs: warn about the useless nolargeio option Adrian Bunk
2006-07-07 0:35 ` Hans Reiser
2006-07-06 20:37 ` [-mm patch] drivers/net/e1000/: possible cleanups Adrian Bunk
2006-07-06 20:47 ` Auke Kok
2006-07-07 7:35 ` Adrian Bunk
2006-07-07 9:17 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 9:35 ` 2.6.17-mm6 Andrew Morton
2006-07-07 21:15 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 21:38 ` 2.6.17-mm6 Andrew Morton
2006-07-07 21:42 ` 2.6.17-mm6 Martin Bligh
2006-07-07 23:06 ` 2.6.17-mm6 Andrew Morton
2006-07-08 3:46 ` 2.6.17-mm6 Badari Pulavarty
2006-07-07 23:08 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 15:24 ` 2.6.17-mm6 Reuben Farrelly
2006-07-08 20:20 ` 2.6.17-mm6: kernel/sysctl.c: PROC_FS=n compile error Adrian Bunk
2006-07-09 18:52 ` Serge E. Hallyn
2006-07-09 23:33 ` Adrian Bunk
2006-07-10 14:22 ` Serge E. Hallyn
2006-07-10 15:08 ` Serge E. Hallyn
-- strict thread matches above, loose matches on Subject: below --
2006-07-07 14:21 2.6.17-mm6 Martin J. Bligh
2006-07-03 10:03 2.6.17-mm6 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44A90276.4050108@reub.net \
--to=reuben-lkml@reub.net \
--cc=akpm@osdl.org \
--cc=brice@myri.com \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.