From: Auke Kok <sofar@foo-projects.org>
To: cramerj@intel.com
Cc: john.ronciak@intel.com, jesse.brandeburg@intel.com,
jeffrey.t.kirsher@intel.com, auke-jan.h.kok@intel.com,
linux-kernel@vger.kernel.org
Subject: Re: [-mm patch] drivers/net/e1000/: possible cleanups
Date: Thu, 06 Jul 2006 13:47:33 -0700 [thread overview]
Message-ID: <44AD76E5.90905@foo-projects.org> (raw)
In-Reply-To: <20060706203736.GS26941@stusta.de>
Adrian Bunk wrote:
> On Mon, Jul 03, 2006 at 03:03:55AM -0700, Andrew Morton wrote:
>> ...
>> Changes since 2.6.17-mm5:
>> ...
>> git-e1000.patch
>> ...
>> git trees.
>> ...
>
> This patch contains the following possible cleanups:
> - make needlessly global functions static
I'm fine with those
> - #if 0 the following unused global functions:
> - e1000_hw.c: e1000_mc_addr_list_update()
> - e1000_hw.c: e1000_read_reg_io()
> - e1000_hw.c: e1000_enable_pciex_master()
> - e1000_hw.c: e1000_ife_disable_dynamic_power_down()
> - e1000_hw.c: e1000_ife_enable_dynamic_power_down()
> - e1000_hw.c: e1000_write_ich8_word()
> - e1000_hw.c: e1000_duplex_reversal()
> - e1000_main.c: e1000_io_read()
I'm wondering if we should not remove those alltogether, or are we preferring
to keep the #if 0'd now?
Cheers,
Auke
below the entire patch.
> Please review which of these changes do make sense and which do
> conflict with pending patches.
>
> Signed-off-by: Adrian Bunk <bunk@stusta.de>
>
> ---
>
> drivers/net/e1000/e1000_hw.c | 89 ++++++++++++++++++++++++---------
> drivers/net/e1000/e1000_hw.h | 32 -----------
> drivers/net/e1000/e1000_main.c | 2
> 3 files changed, 67 insertions(+), 56 deletions(-)
>
> --- linux-2.6.17-mm6-full/drivers/net/e1000/e1000_hw.h.old 2006-07-06 21:17:20.000000000 +0200
> +++ linux-2.6.17-mm6-full/drivers/net/e1000/e1000_hw.h 2006-07-06 21:57:18.000000000 +0200
> @@ -323,13 +323,8 @@
> int32_t e1000_phy_hw_reset(struct e1000_hw *hw);
> int32_t e1000_phy_reset(struct e1000_hw *hw);
> void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
> -int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
> -int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size);
> -int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
> int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
> int32_t e1000_validate_mdi_setting(struct e1000_hw *hw);
> -int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data);
> -int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data);
>
> /* EEPROM Functions */
> int32_t e1000_init_eeprom_params(struct e1000_hw *hw);
> @@ -400,13 +395,8 @@
> int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data);
> int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num);
> int32_t e1000_read_mac_addr(struct e1000_hw * hw);
> -int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
> -void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
> -void e1000_release_software_flag(struct e1000_hw *hw);
> -int32_t e1000_get_software_flag(struct e1000_hw *hw);
>
> /* Filters (multicast, vlan, receive) */
> -void e1000_mc_addr_list_update(struct e1000_hw *hw, uint8_t * mc_addr_list, uint32_t mc_addr_count, uint32_t pad, uint32_t rar_used_count);
> uint32_t e1000_hash_mc_addr(struct e1000_hw *hw, uint8_t * mc_addr);
> void e1000_mta_set(struct e1000_hw *hw, uint32_t hash_value);
> void e1000_rar_set(struct e1000_hw *hw, uint8_t * mc_addr, uint32_t rar_index);
> @@ -431,31 +421,9 @@
> void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
> void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value);
> /* Port I/O is only supported on 82544 and newer */
> -uint32_t e1000_io_read(struct e1000_hw *hw, unsigned long port);
> -uint32_t e1000_read_reg_io(struct e1000_hw *hw, uint32_t offset);
> void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value);
> -void e1000_enable_pciex_master(struct e1000_hw *hw);
> int32_t e1000_disable_pciex_master(struct e1000_hw *hw);
> -int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
> -void e1000_release_software_semaphore(struct e1000_hw *hw);
> int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
> -int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop);
> -
> -int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
> - uint8_t *data);
> -int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
> - uint8_t byte);
> -int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
> - uint8_t byte);
> -int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
> - uint16_t *data);
> -int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
> - uint32_t size, uint16_t *data);
> -int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
> - uint16_t words, uint16_t *data);
> -int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
> - uint16_t words, uint16_t *data);
> -int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment);
>
>
> #define E1000_READ_REG_IO(a, reg) \
> --- linux-2.6.17-mm6-full/drivers/net/e1000/e1000_hw.c.old 2006-07-06 21:16:17.000000000 +0200
> +++ linux-2.6.17-mm6-full/drivers/net/e1000/e1000_hw.c 2006-07-06 21:39:03.000000000 +0200
> @@ -105,6 +105,33 @@
> uint16_t duplex);
> static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
>
> +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw,
> + uint32_t segment);
> +static int32_t e1000_get_software_flag(struct e1000_hw *hw);
> +static int32_t e1000_get_software_semaphore(struct e1000_hw *hw);
> +static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw);
> +static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
> +static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
> + uint16_t words, uint16_t *data);
> +static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index,
> + uint8_t* data);
> +static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index,
> + uint16_t *data);
> +static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr,
> + uint16_t *data);
> +static void e1000_release_software_flag(struct e1000_hw *hw);
> +static void e1000_release_software_semaphore(struct e1000_hw *hw);
> +static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw,
> + uint32_t no_snoop);
> +static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw,
> + uint32_t index, uint8_t byte);
> +static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset,
> + uint16_t words, uint16_t *data);
> +static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index,
> + uint8_t data);
> +static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr,
> + uint16_t data);
> +
> /* IGP cable length table */
> static const
> uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
> @@ -3233,7 +3260,7 @@
> return data;
> }
>
> -int32_t
> +static int32_t
> e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
> {
> uint32_t swfw_sync = 0;
> @@ -3277,7 +3304,7 @@
> return E1000_SUCCESS;
> }
>
> -void
> +static void
> e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
> {
> uint32_t swfw_sync;
> @@ -3575,7 +3602,7 @@
> return E1000_SUCCESS;
> }
>
> -int32_t
> +static int32_t
> e1000_read_kmrn_reg(struct e1000_hw *hw,
> uint32_t reg_addr,
> uint16_t *data)
> @@ -3608,7 +3635,7 @@
> return E1000_SUCCESS;
> }
>
> -int32_t
> +static int32_t
> e1000_write_kmrn_reg(struct e1000_hw *hw,
> uint32_t reg_addr,
> uint16_t data)
> @@ -3839,7 +3866,7 @@
> *
> * hw - struct containing variables accessed by shared code
> ******************************************************************************/
> -int32_t
> +static int32_t
> e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
> {
> int32_t ret_val;
> @@ -4086,7 +4113,7 @@
> * hw - Struct containing variables accessed by shared code
> * phy_info - PHY information structure
> ******************************************************************************/
> -int32_t
> +static int32_t
> e1000_phy_ife_get_info(struct e1000_hw *hw,
> struct e1000_phy_info *phy_info)
> {
> @@ -5643,6 +5670,7 @@
> * for the first 15 multicast addresses, and hashes the rest into the
> * multicast table.
> *****************************************************************************/
> +#if 0
> void
> e1000_mc_addr_list_update(struct e1000_hw *hw,
> uint8_t *mc_addr_list,
> @@ -5719,6 +5747,7 @@
> }
> DEBUGOUT("MC Update Complete\n");
> }
> +#endif /* 0 */
>
> /******************************************************************************
> * Hashes an address to determine its location in the multicast table
> @@ -6587,6 +6616,7 @@
> * hw - Struct containing variables accessed by shared code
> * offset - offset to read from
> *****************************************************************************/
> +#if 0
> uint32_t
> e1000_read_reg_io(struct e1000_hw *hw,
> uint32_t offset)
> @@ -6597,6 +6627,7 @@
> e1000_io_write(hw, io_addr, offset);
> return e1000_io_read(hw, io_data);
> }
> +#endif /* 0 */
>
> /******************************************************************************
> * Writes a value to one of the devices registers using port I/O (as opposed to
> @@ -7909,6 +7940,7 @@
> * returns: - none.
> *
> ***************************************************************************/
> +#if 0
> void
> e1000_enable_pciex_master(struct e1000_hw *hw)
> {
> @@ -7923,6 +7955,7 @@
> ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE;
> E1000_WRITE_REG(hw, CTRL, ctrl);
> }
> +#endif /* 0 */
>
> /*******************************************************************************
> *
> @@ -8148,7 +8181,7 @@
> * E1000_SUCCESS at any other case.
> *
> ***************************************************************************/
> -int32_t
> +static int32_t
> e1000_get_software_semaphore(struct e1000_hw *hw)
> {
> int32_t timeout = hw->eeprom.word_size + 1;
> @@ -8183,7 +8216,7 @@
> * hw: Struct containing variables accessed by shared code
> *
> ***************************************************************************/
> -void
> +static void
> e1000_release_software_semaphore(struct e1000_hw *hw)
> {
> uint32_t swsm;
> @@ -8265,7 +8298,7 @@
> * returns: E1000_SUCCESS
> *
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop)
> {
> uint32_t gcr_reg = 0;
> @@ -8306,7 +8339,7 @@
> * hw: Struct containing variables accessed by shared code
> *
> ***************************************************************************/
> -int32_t
> +static int32_t
> e1000_get_software_flag(struct e1000_hw *hw)
> {
> int32_t timeout = PHY_CFG_TIMEOUT;
> @@ -8345,7 +8378,7 @@
> * hw: Struct containing variables accessed by shared code
> *
> ***************************************************************************/
> -void
> +static void
> e1000_release_software_flag(struct e1000_hw *hw)
> {
> uint32_t extcnf_ctrl;
> @@ -8369,6 +8402,7 @@
> * hw: Struct containing variables accessed by shared code
> *
> ***************************************************************************/
> +#if 0
> int32_t
> e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw)
> {
> @@ -8388,6 +8422,7 @@
>
> return ret_val;
> }
> +#endif /* 0 */
>
> /***************************************************************************
> *
> @@ -8397,6 +8432,7 @@
> * hw: Struct containing variables accessed by shared code
> *
> ***************************************************************************/
> +#if 0
> int32_t
> e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw)
> {
> @@ -8416,6 +8452,7 @@
>
> return ret_val;
> }
> +#endif /* 0 */
>
> /******************************************************************************
> * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
> @@ -8426,7 +8463,7 @@
> * data - word read from the EEPROM
> * words - number of words to read
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
> uint16_t *data)
> {
> @@ -8482,7 +8519,7 @@
> * words - number of words to write
> * data - words to write to the EEPROM
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words,
> uint16_t *data)
> {
> @@ -8529,7 +8566,7 @@
> *
> * hw - The pointer to the hw structure
> ****************************************************************************/
> -int32_t
> +static int32_t
> e1000_ich8_cycle_init(struct e1000_hw *hw)
> {
> union ich8_hws_flash_status hsfsts;
> @@ -8596,7 +8633,7 @@
> *
> * hw - The pointer to the hw structure
> ****************************************************************************/
> -int32_t
> +static int32_t
> e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout)
> {
> union ich8_hws_flash_ctrl hsflctl;
> @@ -8631,7 +8668,7 @@
> * size - Size of data to read, 1=byte 2=word
> * data - Pointer to the word to store the value read.
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index,
> uint32_t size, uint16_t* data)
> {
> @@ -8710,7 +8747,7 @@
> * size - Size of data to read, 1=byte 2=word
> * data - The byte(s) to write to the NVM.
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size,
> uint16_t data)
> {
> @@ -8785,7 +8822,7 @@
> * index - The index of the byte to read.
> * data - Pointer to a byte to store the value read.
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t* data)
> {
> int32_t status = E1000_SUCCESS;
> @@ -8808,7 +8845,7 @@
> * index - The index of the byte to write.
> * byte - The byte to write to the NVM.
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte)
> {
> int32_t error = E1000_SUCCESS;
> @@ -8839,7 +8876,7 @@
> * index - The index of the byte to read.
> * data - The byte to write to the NVM.
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t data)
> {
> int32_t status = E1000_SUCCESS;
> @@ -8857,7 +8894,7 @@
> * index - The starting byte index of the word to read.
> * data - Pointer to a word to store the value read.
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data)
> {
> int32_t status = E1000_SUCCESS;
> @@ -8872,6 +8909,7 @@
> * index - The starting byte index of the word to read.
> * data - The word to write to the NVM.
> *****************************************************************************/
> +#if 0
> int32_t
> e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data)
> {
> @@ -8879,6 +8917,7 @@
> status = e1000_write_ich8_data(hw, index, 2, data);
> return status;
> }
> +#endif /* 0 */
>
> /******************************************************************************
> * Erases the bank specified. Each bank is a 4k block. Segments are 0 based.
> @@ -8887,7 +8926,7 @@
> * hw - pointer to e1000_hw structure
> * segment - 0 for first segment, 1 for second segment, etc.
> *****************************************************************************/
> -int32_t
> +static int32_t
> e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment)
> {
> union ich8_hws_flash_status hsfsts;
> @@ -8984,6 +9023,7 @@
> * hw: Struct containing variables accessed by shared code
> *
> *****************************************************************************/
> +#if 0
> int32_t
> e1000_duplex_reversal(struct e1000_hw *hw)
> {
> @@ -9012,8 +9052,9 @@
>
> return ret_val;
> }
> +#endif /* 0 */
>
> -int32_t
> +static int32_t
> e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
> uint32_t cnf_base_addr, uint32_t cnf_size)
> {
> @@ -9047,7 +9088,7 @@
> }
>
>
> -int32_t
> +static int32_t
> e1000_init_lcd_from_nvm(struct e1000_hw *hw)
> {
> uint32_t reg_data, cnf_base_addr, cnf_size, ret_val, loop;
> --- linux-2.6.17-mm6-full/drivers/net/e1000/e1000_main.c.old 2006-07-06 21:57:45.000000000 +0200
> +++ linux-2.6.17-mm6-full/drivers/net/e1000/e1000_main.c 2006-07-06 21:58:01.000000000 +0200
> @@ -4387,11 +4387,13 @@
> pci_write_config_word(adapter->pdev, reg, *value);
> }
>
> +#if 0
> uint32_t
> e1000_io_read(struct e1000_hw *hw, unsigned long port)
> {
> return inl(port);
> }
> +#endif /* 0 */
>
> void
> e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2006-07-06 21:00 UTC|newest]
Thread overview: 128+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-07-03 10:03 2.6.17-mm6 Andrew Morton
2006-07-03 10:50 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 10:56 ` 2.6.17-mm6 Andrew Morton
2006-07-03 11:36 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 12:27 ` 2.6.17-mm6 Michal Piotrowski
2006-07-03 13:28 ` 2.6.17-mm6 Dmitry Torokhov
2006-07-03 11:00 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 11:25 ` 2.6.17-mm6 Andrew Morton
2006-07-03 12:34 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 11:39 ` 2.6.17-mm6 Andrew Morton
2006-07-03 11:41 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 12:10 ` 2.6.17-mm6 Andrew Morton
2006-07-03 13:36 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 20:21 ` 2.6.17-mm6 Andrew Morton
2006-07-03 20:31 ` 2.6.17-mm6 Reuben Farrelly
2006-07-03 12:29 ` 2.6.17-mm6 Sergey Vlasov
2006-07-03 17:25 ` 2.6.17-mm6 Jeremy Fitzhardinge
2006-07-03 19:01 ` 2.6.17-mm6 Andrew Morton
2006-07-03 12:15 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 12:17 ` 2.6.17-mm6 Heiko Carstens
2006-07-03 13:08 ` 2.6.17-mm6 Martin Peschke
2006-07-03 13:12 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 12:15 ` 2.6.17-mm6 Cedric Le Goater
2006-07-03 14:09 ` 2.6.17-mm6 Theodore Tso
2006-07-03 19:07 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:37 ` 2.6.17-mm6 Andrew Morton
2006-07-03 19:43 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:27 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 19:39 ` 2.6.17-mm6 Andrew Morton
2006-07-03 19:56 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 20:17 ` 2.6.17-mm6 Andrew Morton
2006-07-03 20:36 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 20:54 ` 2.6.17-mm6 Andrew Morton
2006-07-03 21:50 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 23:31 ` 2.6.17-mm6 Andrew Morton
2006-07-04 8:34 ` 2.6.17-mm6 Alistair John Strachan
2006-07-04 8:49 ` 2.6.17-mm6 Andrew Morton
2006-07-04 16:28 ` 2.6.17-mm6 Alistair John Strachan
2006-07-05 20:37 ` 2.6.17-mm6 john stultz
2006-07-05 20:46 ` 2.6.17-mm6 Greg KH
2006-07-05 22:32 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 17:31 ` 2.6.17-mm6 john stultz
2006-07-06 19:06 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 19:16 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 20:02 ` 2.6.17-mm6 Alistair John Strachan
2006-07-06 20:11 ` 2.6.17-mm6 Greg KH
2006-07-07 20:48 ` 2.6.17-mm6 Alistair John Strachan
2006-07-08 16:02 ` 2.6.17-mm6 Alistair John Strachan
2006-07-03 22:10 ` 2.6.17-mm6 Anton Blanchard
2006-07-04 19:53 ` 2.6.17-mm6 Rafael J. Wysocki
2006-07-04 20:01 ` 2.6.17-mm6 Arjan van de Ven
2006-07-05 10:27 ` 2.6.17-mm6 Stefan Richter
2006-07-05 10:36 ` 2.6.17-mm6 Stefan Richter
2006-07-05 11:13 ` 2.6.17-mm6 Ingo Molnar
2006-07-05 21:43 ` 2.6.17-mm6 J.A. Magallón
2006-07-05 22:56 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:57 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 0:02 ` 2.6.17-mm6 Andrew Morton
2006-07-06 14:36 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 14:48 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 21:44 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 21:57 ` 2.6.17-mm6 Andrew Morton
2006-07-07 15:38 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 16:02 ` 2.6.17-mm6 Alan Cox
2006-07-07 15:55 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 16:44 ` 2.6.17-mm6 Alan Cox
2006-07-07 16:34 ` 2.6.17-mm6 Randy.Dunlap
2006-07-07 17:09 ` 2.6.17-mm6 Alan Cox
2006-07-07 17:14 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 17:22 ` 2.6.17-mm6 David Lloyd
2006-07-07 17:23 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 17:44 ` 2.6.17-mm6 Alan Cox
2006-07-07 17:39 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:03 ` 2.6.17-mm6 Alan Cox
2006-07-07 19:59 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:23 ` 2.6.17-mm6 Alan Cox
2006-07-07 20:14 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 20:42 ` 2.6.17-mm6 Alan Cox
2006-07-07 20:37 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 21:09 ` 2.6.17-mm6 J.A. Magallón
2006-07-07 21:11 ` 2.6.17-mm6 Jeff Garzik
2006-07-07 21:40 ` 2.6.17-mm6 J.A. Magallón
2006-07-06 23:26 ` 2.6.17-mm6 (try-3) Randy.Dunlap
[not found] ` <a762e240607051447x3c3c6e15k9cdb38804cf13f35@mail.gmail.com>
2006-07-05 22:50 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:28 ` 2.6.17-mm6 Keith Mannthey
2006-07-05 23:44 ` 2.6.17-mm6 Andrew Morton
2006-07-05 23:48 ` 2.6.17-mm6 Andrew Morton
2006-07-06 0:05 ` 2.6.17-mm6 Keith Mannthey
2006-07-06 0:25 ` 2.6.17-mm6 Andrew Morton
2006-07-06 5:42 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 5:59 ` 2.6.17-mm6 Andrew Morton
2006-07-06 6:31 ` 2.6.17-mm6 Andrew Morton
2006-07-06 7:18 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 7:25 ` 2.6.17-mm6 Ingo Molnar
2006-07-06 8:21 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 8:26 ` 2.6.17-mm6 Ingo Molnar
2006-07-06 7:31 ` 2.6.17-mm6 Arjan van de Ven
2006-07-06 16:37 ` 2.6.17-mm6 Valdis.Kletnieks
2006-07-06 16:49 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 6:40 ` 2.6.17-mm6 Eric W. Biederman
2006-07-06 7:38 ` 2.6.17-mm6 vmstat breakage Mike Galbraith
2006-07-06 8:24 ` Andrew Morton
2006-07-06 17:16 ` 2.6.17-mm6 Andi Kleen
2006-07-12 3:55 ` 2.6.17-mm6 Steven Rostedt
2006-07-06 20:36 ` [-mm patch] drivers/edac/: make code static Adrian Bunk
2006-07-06 20:37 ` [Ocfs2-devel] [-mm patch] fs/ocfs2/inode.c:ocfs2_refresh_inode(): remove unused variable Adrian Bunk
2006-07-06 20:37 ` Adrian Bunk
2006-07-06 20:43 ` [Ocfs2-devel] " Mark Fasheh
2006-07-06 20:43 ` Mark Fasheh
2006-07-06 20:37 ` [-mm patch] reiserfs: warn about the useless nolargeio option Adrian Bunk
2006-07-07 0:35 ` Hans Reiser
2006-07-06 20:37 ` [-mm patch] drivers/net/e1000/: possible cleanups Adrian Bunk
2006-07-06 20:47 ` Auke Kok [this message]
2006-07-07 7:35 ` Adrian Bunk
2006-07-07 9:17 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 9:35 ` 2.6.17-mm6 Andrew Morton
2006-07-07 21:15 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 21:38 ` 2.6.17-mm6 Andrew Morton
2006-07-07 21:42 ` 2.6.17-mm6 Martin Bligh
2006-07-07 23:06 ` 2.6.17-mm6 Andrew Morton
2006-07-08 3:46 ` 2.6.17-mm6 Badari Pulavarty
2006-07-07 23:08 ` 2.6.17-mm6 Reuben Farrelly
2006-07-07 15:24 ` 2.6.17-mm6 Reuben Farrelly
2006-07-08 20:20 ` 2.6.17-mm6: kernel/sysctl.c: PROC_FS=n compile error Adrian Bunk
2006-07-09 18:52 ` Serge E. Hallyn
2006-07-09 23:33 ` Adrian Bunk
2006-07-10 14:22 ` Serge E. Hallyn
2006-07-10 15:08 ` Serge E. Hallyn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44AD76E5.90905@foo-projects.org \
--to=sofar@foo-projects.org \
--cc=auke-jan.h.kok@intel.com \
--cc=cramerj@intel.com \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=john.ronciak@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.