From: Olaf Hering <olh@suse.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Robert Hancock <hancockr@shaw.ca>,
linuxppc-dev@ozlabs.org,
Stefan Richter <stefanr@s5r6.in-berlin.de>,
stable@kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2.6.22.y] ieee1394: revert "sbp2: enforce 32bit DMA mapping"
Date: Mon, 6 Aug 2007 15:51:24 +0200 [thread overview]
Message-ID: <20070806135124.GA2900@suse.de> (raw)
In-Reply-To: <1186351473.938.21.camel@localhost.localdomain>
On Mon, Aug 06, Benjamin Herrenschmidt wrote:
> BTW. Any reason why you don't set the DMA mask in the ohci driver rather
> than the sbp2 one ?
I used this patch, and the attached CD was found.
What dma mask should be used in ohci_probe()?
---
drivers/ieee1394/ohci1394.c | 2 ++
drivers/ieee1394/sbp2.c | 3 +++
drivers/pci/pci.c | 1 +
drivers/pci/probe.c | 1 +
include/asm-powerpc/dma-mapping.h | 1 +
5 files changed, 8 insertions(+)
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -3223,6 +3223,8 @@ static int __devinit ohci1394_pci_probe(
}
#endif /* CONFIG_PPC_PMAC */
+ if (pci_set_dma_mask(dev, DMA_32BIT_MASK))
+ FAIL(-ENXIO, "Failed to set DMA mask");
if (pci_enable_device(dev))
FAIL(-ENXIO, "Failed to enable OHCI hardware");
pci_set_master(dev);
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -775,12 +775,15 @@ static struct sbp2_lu *sbp2_alloc_device
goto failed_alloc;
}
#else
+ printk(KERN_DEBUG "%s():%u dev '%s' %p parent '%s' %p %016lx\n",__func__,__LINE__,hi->host->device.bus_id,hi->host->device.dma_mask,hi->host->device.parent->bus_id,(hi->host->device.parent->dma_mask),*(hi->host->device.parent->dma_mask));
if (dma_set_mask(hi->host->device.parent, DMA_32BIT_MASK)) {
SBP2_ERR("failed to set 4GB DMA mask");
goto failed_alloc;
}
#endif
}
+ else
+ printk(KERN_DEBUG "%s():%u dev '%s' parent '%s'\n",__func__,__LINE__,hi->host->device.bus_id,hi->host->device.parent->bus_id);
/* Prevent unloading of the 1394 host */
if (!try_module_get(hi->host->driver->owner)) {
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1358,6 +1358,7 @@ pci_set_dma_mask(struct pci_dev *dev, u6
return -EIO;
dev->dma_mask = mask;
+ printk(KERN_DEBUG "%s() '%s' %p %016lx\n",__func__,dev->dev.bus_id,dev->dev.dma_mask,*(dev->dev.dma_mask));
return 0;
}
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -937,6 +937,7 @@ void pci_device_add(struct pci_dev *dev,
set_dev_node(&dev->dev, pcibus_to_node(bus));
dev->dev.dma_mask = &dev->dma_mask;
+ printk(KERN_DEBUG "%s() '%s' %p %016lx\n",__func__,dev->dev.bus_id,dev->dev.dma_mask,*(dev->dev.dma_mask));
dev->dev.coherent_dma_mask = 0xffffffffull;
/* Fix up broken headers */
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -92,6 +92,7 @@ static inline int dma_set_mask(struct de
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+ printk(KERN_DEBUG "%s() '%s' %016llx %p\n",__func__,dev->bus_id,(unsigned long long)dma_mask,dma_ops);
if (unlikely(dma_ops == NULL))
return -EIO;
if (dma_ops->set_dma_mask != NULL)
Using PowerMac machine description
Page orders: linear mapping = 24, virtual = 12, io = 12
Found initrd at 0xc000000001500000:0xc000000001763000
Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x32
Mapped at 0xd000080080000000
Found a K2 mac-io controller, rev: 32, mapped at 0xd000080080041000
PowerMac motherboard: PowerMac G5
DART: table not allocated, using direct DMA
Starting Linux PPC64 #4 SMP Mon Aug 6 15:40:01 CEST 2007
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x10000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0xc00000000f800000
htab_hash_mask = 0x7fff
-----------------------------------------------------
Linux version 2.6.22.1-ppc64 (geeko@buildhost) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #4 SMP Mon Aug 6 15:40:01 CEST 2007
[boot]0012 Setup Arch
Top of RAM: 0x10000000, Total RAM: 0x10000000
Memory hole size: 0MB
Entering add_active_range(0, 0, 65536) 0 entries of 256 used
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI Host 0, io start: 400000; io end: bfffff
PCI Host 1, io start: 0; io end: 3fffff
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=493, gen1=492
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
early_node_map[1] active PFN ranges
0: 0 -> 65536
On node 0 totalpages: 65536
DMA zone: 896 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 64640 pages, LIFO batch:15
Normal zone: 0 pages used for memmap
[boot]0015 Setup Done
Built 1 zonelists. Total pages: 64640
Kernel command line:
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
PID hash table entries: 1024 (order: 10, 8192 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency = 1600.000000 MHz
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
freeing bootmem node 0
Memory: 242692k/262144k available (5920k kernel code, 19452k reserved, 1384k data, 1103k bss, 292k init)
Calibrating delay loop... 66.56 BogoMIPS (lpj=332800)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
PowerMac SMP probe found 1 cpus
Brought up 1 CPUs
NET: Registered protocol family 16
KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
channel 0 bus <multibus>
PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
CPU Hotplug not supported by firmware - disabling.
PCI: Probing PCI hardware
pci_device_add() '0000:f0:0b.0' c000000001978860 00000000ffffffff
pci_device_add() '0000:f0:10.0' c00000000ff41860 00000000ffffffff
pci_device_add() '0001:00:01.0' c00000000ff41060 0000000000000000
pci_device_add() '0001:06:03.0' c00000000ff47860 0000000000000000
pci_device_add() '0001:00:02.0' c00000000ff47060 0000000000000000
Can't get ranges for PCI-PCI bridge /ht@0,f2000000/pci@2
pci_device_add() '0001:00:03.0' c00000000ff48860 0000000000000000
pci_device_add() '0001:01:07.0' c00000000ff48060 0000000000000000
pci_device_add() '0001:01:08.0' c00000000ff4b860 0000000000000000
pci_device_add() '0001:01:09.0' c00000000ff4b060 0000000000000000
pci_device_add() '0001:00:04.0' c00000000ff6c860 0000000000000000
pci_device_add() '0001:02:0b.0' c00000000ff6c060 0000000000000000
pci_device_add() '0001:02:0b.1' c00000000ff6d860 0000000000000000
pci_device_add() '0001:02:0b.2' c00000000ff6d060 0000000000000000
pci_device_add() '0001:00:05.0' c00000000ff6e860 0000000000000000
pci_device_add() '0001:03:0d.0' c00000000ff6e060 0000000000000000
pci_device_add() '0001:03:0e.0' c00000000ff71860 0000000000000000
pci_device_add() '0001:00:06.0' c00000000ff71060 0000000000000000
pci_device_add() '0001:04:0f.0' c00000000ff72860 0000000000000000
pci_device_add() '0001:00:07.0' c00000000ff72060 0000000000000000
pci_device_add() '0001:05:0c.0' c00000000ff73860 0000000000000000
mapping IO f0000000 -> d000080000400000, size: 800000
mapping IO f4000000 -> d000080000000000, size: 400000
PCI: Probing PCI hardware done
Registering pmac pic with sysfs...
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 5, 196608 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 2444k freed
nvram_init: Could not find nvram partition for nvram buffered error logging.
rtas_flash: no firmware flash support
IBM eBus Device Driver
Registering G5 CPU frequency driver
Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
Low: 1301 Mhz, High: 1600 Mhz, Cur: 1600 MHz
audit: initializing netlink socket (disabled)
audit(1186407931.610:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
rpadlpar_io_init: partition not DLPAR capable
nvidiafb: Device ID: 10de0321
nvidiafb: CRTC0 analog not found
nvidiafb: CRTC1 analog found
nvidiafb: EDID found from BUS1
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
nvidiafb: Found OF EDID for head 2
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 1appears to have a CRT attached
nvidiafb: Using CRT on CRTC 1
Trying to im_free nonexistent area (d0000800800c1000)
Console: switching to colour frame buffer device 160x64
nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA8000000)
vio_register_driver: driver hvc_console registering
HVSI: registered 0 devices
Generic RTC Driver v1.07
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
MacIO PCI driver attached to K2 chipset
input: Macintosh mouse button emulation as /class/input/input0
PowerMac G5 Thermal control driver 1.3
adb: starting probe task...
adb: finished probe task...
Detected fan controls:
0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
1: RPM fan, id 2, location: DRIVE BAY
2: PWM fan, id 2, location: SLOT,PCI FAN
3: RPM fan, id 3, location: CPU A INTAKE
4: RPM fan, id 4, location: CPU A EXHAUST
5: RPM fan, id 5, location: CPU B INTAKE
6: RPM fan, id 6, location: CPU B EXHAUST
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI: Enabling device: (0001:03:0d.0), cmd 16
ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
hda: Enabling Ultra DMA 2
ide0 at 0xd00008008729a000-0xd00008008729a007,0xd00008008729a160 on irq 39
PCI: Enabling device: (0001:02:0b.2), cmd 6
ehci_hcd 0001:02:0b.2: EHCI Host Controller
ehci_hcd 0001:02:0b.2: new USB bus registered, assigned bus number 1
ehci_hcd 0001:02:0b.2: irq 63, io mem 0x80100000
ehci_hcd 0001:02:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.1-ppc64 ehci_hcd
usb usb1: SerialNumber: 0001:02:0b.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Enabling device: (0001:01:08.0), cmd 2
ohci_hcd 0001:01:08.0: OHCI Host Controller
ohci_hcd 0001:01:08.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:01:08.0: irq 27, io mem 0x80081000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
usb usb2: SerialNumber: 0001:01:08.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device: (0001:01:09.0), cmd 2
ohci_hcd 0001:01:09.0: OHCI Host Controller
ohci_hcd 0001:01:09.0: new USB bus registered, assigned bus number 3
ohci_hcd 0001:01:09.0: irq 28, io mem 0x80080000
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
usb usb3: SerialNumber: 0001:01:09.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device: (0001:02:0b.0), cmd 2
ohci_hcd 0001:02:0b.0: OHCI Host Controller
ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 4
ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
usb usb4: SerialNumber: 0001:02:0b.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
PCI: Enabling device: (0001:02:0b.1), cmd 2
ohci_hcd 0001:02:0b.1: OHCI Host Controller
ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 5
ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
usb usb5: SerialNumber: 0001:02:0b.1
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus u3 1 registered
PowerMac i2c bus u3 0 registered
FCU Initialized, RPM fan shift is 3
usb 5-2: new full speed USB device using ohci_hcd and address 2
usb 5-2: new device found, idVendor=05ac, idProduct=1003
usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Hub in Apple Extended USB Keyboard
usb 5-2: Manufacturer: Mitsumi Electric
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 3 ports detected
usb 5-2.1: new low speed USB device using ohci_hcd and address 3
usb 5-2.1: new device found, idVendor=05ac, idProduct=0307
usb 5-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2.1: Product: Apple Optical USB Mouse
usb 5-2.1: Manufacturer: Logitech
usb 5-2.1: configuration #1 chosen from 1 choice
usb 5-2.3: new full speed USB device using ohci_hcd and address 4
usb 5-2.3: new device found, idVendor=05ac, idProduct=020c
usb 5-2.3: new device strings: Mfr=1, Product=3, SerialNumber=0
usb 5-2.3: Product: Apple Extended USB Keyboard
usb 5-2.3: Manufacturer: Mitsumi Electric
usb 5-2.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech Apple Optical USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0001:02:0b.1-2.1
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3
input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3
usbcore: registered new interface driver usbhid
/dev/shm/R/linux-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using ppc64/970 performance monitoring.
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
input: PMU as /class/input/input4
Registered led device: pmu-front-led
Freeing unused kernel memory: 292k freed
SCSI subsystem initialized
libata version 3.00 loaded.
sata_svw 0001:05:0c.0: version 2.2
pci_set_dma_mask() '0001:05:0c.0' c00000000ff73860 00000000ffffffff
scsi0 : sata_svw
scsi1 : sata_svw
scsi2 : sata_svw
scsi3 : sata_svw
ata1: SATA max UDMA/133 cmd 0xd0000800872a1000 ctl 0xd0000800872a1020 bmdma 0xd0000800872a1030 irq 16
ata2: SATA max UDMA/133 cmd 0xd0000800872a1100 ctl 0xd0000800872a1120 bmdma 0xd0000800872a1130 irq 16
ata3: SATA max UDMA/133 cmd 0xd0000800872a1200 ctl 0xd0000800872a1220 bmdma 0xd0000800872a1230 irq 16
ata4: SATA max UDMA/133 cmd 0xd0000800872a1300 ctl 0xd0000800872a1320 bmdma 0xd0000800872a1330 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: ST380013AS, 3.05, max UDMA/133
ata1.00: 156301488 sectors, multi 0: LBA48
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/133
ata2.00: 156312576 sectors, multi 0: LBA
ata2.00: configured for UDMA/133
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.05 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
sd 1:0:0:0: [sdb] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected Apple U3 chipset
agpgart: configuring for size idx: 8
agpgart: AGP aperture is 32M @ 0x0
tg3.c:v3.77 (May 31, 2007)
PCI: Enabling device: (0001:06:03.0), cmd 6
hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
snd-aoa-fabric-layout: found bus with layout 36
snd-aoa-fabric-layout: Using PMF GPIOs
snd-aoa-codec-tas: found 'deq' node
snd-aoa-fabric-layout: can use this codec
snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
pci_set_dma_mask() '0001:06:03.0' c00000000ff47860 ffffffffffffffff
eth0: Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:64-bit) 10/100/1000Base-T Ethernet 00:04:76:f3:c2:4f
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[76ff2d0f] dma_mask[64-bit]
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
pci_set_dma_mask() '0001:04:0f.0' c00000000ff72860 00000000ffffffff
PHY ID: 2062e0, addr: 1
eth1: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:a6:5d:66
eth1: Found BCM5421-K2 PHY
pci_set_dma_mask() '0001:03:0e.0' c00000000ff71860 00000000ffffffff
PCI: Enabling device: (0001:03:0e.0), cmd 2
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[80200000-802007ff] Max Packet=[4096] IR/IT contexts=[8/8]
Adding 1023992k swap on /dev/sdb3. Priority:-1 extents:1 across:1023992k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010100305179115]
ieee1394: Host added: ID:BUS[0-01:1023] GUID[000a95fffea65d66]
sbp2_alloc_device():778 dev 'fw-host0' 0000000000000000 parent '0001:03:0e.0' c00000000ff71860 00000000ffffffff
dma_set_mask() '0001:03:0e.0' 00000000ffffffff c0000000005fee68
scsi4 : SBP-2 IEEE-1394
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
REISERFS (device sdb4): found reiserfs format "3.6" with standard journal
REISERFS (device sdb4): using ordered data mode
reiserfs: using flush barriers
REISERFS (device sdb4): journal params: device sdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sdb4): checking transaction log (sdb4)
REISERFS (device sdb4): Using r5 hash to sort names
eth1: Link is up at 100 Mbps, full-duplex.
AppArmor: AppArmor initialized<5>audit(1186407949.200:2): info="AppArmor initialized" pid=1871
fuse init (API version 7.8)
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-85JS F100 PQ: 0 ANSI: 0
scsi 4:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
sr 4:0:0:0: Attached scsi CD-ROM sr0
audit(1186407951.229:3): operation="file_lock" requested_mask="k" denied_mask="k" name="/var/run/klogd.pid" pid=1949 profile="/sbin/klogd"
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
eth1: Link is up at 100 Mbps, full-duplex.
eth1: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
audit(1186407961.889:4): operation="file_lock" requested_mask="k" denied_mask="k" name="/var/run/klogd.pid" pid=3061 profile="/sbin/klogd"
audit(1186407962.979:5): audit_pid=3113 old=0 by auid=4294967295
WARNING: multiple messages have this Message-ID (diff)
From: Olaf Hering <olh@suse.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>,
Robert Hancock <hancockr@shaw.ca>,
linuxppc-dev@ozlabs.org, stable@kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2.6.22.y] ieee1394: revert "sbp2: enforce 32bit DMA mapping"
Date: Mon, 6 Aug 2007 15:51:24 +0200 [thread overview]
Message-ID: <20070806135124.GA2900@suse.de> (raw)
In-Reply-To: <1186351473.938.21.camel@localhost.localdomain>
On Mon, Aug 06, Benjamin Herrenschmidt wrote:
> BTW. Any reason why you don't set the DMA mask in the ohci driver rather
> than the sbp2 one ?
I used this patch, and the attached CD was found.
What dma mask should be used in ohci_probe()?
---
drivers/ieee1394/ohci1394.c | 2 ++
drivers/ieee1394/sbp2.c | 3 +++
drivers/pci/pci.c | 1 +
drivers/pci/probe.c | 1 +
include/asm-powerpc/dma-mapping.h | 1 +
5 files changed, 8 insertions(+)
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -3223,6 +3223,8 @@ static int __devinit ohci1394_pci_probe(
}
#endif /* CONFIG_PPC_PMAC */
+ if (pci_set_dma_mask(dev, DMA_32BIT_MASK))
+ FAIL(-ENXIO, "Failed to set DMA mask");
if (pci_enable_device(dev))
FAIL(-ENXIO, "Failed to enable OHCI hardware");
pci_set_master(dev);
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -775,12 +775,15 @@ static struct sbp2_lu *sbp2_alloc_device
goto failed_alloc;
}
#else
+ printk(KERN_DEBUG "%s():%u dev '%s' %p parent '%s' %p %016lx\n",__func__,__LINE__,hi->host->device.bus_id,hi->host->device.dma_mask,hi->host->device.parent->bus_id,(hi->host->device.parent->dma_mask),*(hi->host->device.parent->dma_mask));
if (dma_set_mask(hi->host->device.parent, DMA_32BIT_MASK)) {
SBP2_ERR("failed to set 4GB DMA mask");
goto failed_alloc;
}
#endif
}
+ else
+ printk(KERN_DEBUG "%s():%u dev '%s' parent '%s'\n",__func__,__LINE__,hi->host->device.bus_id,hi->host->device.parent->bus_id);
/* Prevent unloading of the 1394 host */
if (!try_module_get(hi->host->driver->owner)) {
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1358,6 +1358,7 @@ pci_set_dma_mask(struct pci_dev *dev, u6
return -EIO;
dev->dma_mask = mask;
+ printk(KERN_DEBUG "%s() '%s' %p %016lx\n",__func__,dev->dev.bus_id,dev->dev.dma_mask,*(dev->dev.dma_mask));
return 0;
}
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -937,6 +937,7 @@ void pci_device_add(struct pci_dev *dev,
set_dev_node(&dev->dev, pcibus_to_node(bus));
dev->dev.dma_mask = &dev->dma_mask;
+ printk(KERN_DEBUG "%s() '%s' %p %016lx\n",__func__,dev->dev.bus_id,dev->dev.dma_mask,*(dev->dev.dma_mask));
dev->dev.coherent_dma_mask = 0xffffffffull;
/* Fix up broken headers */
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -92,6 +92,7 @@ static inline int dma_set_mask(struct de
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+ printk(KERN_DEBUG "%s() '%s' %016llx %p\n",__func__,dev->bus_id,(unsigned long long)dma_mask,dma_ops);
if (unlikely(dma_ops == NULL))
return -EIO;
if (dma_ops->set_dma_mask != NULL)
Using PowerMac machine description
Page orders: linear mapping = 24, virtual = 12, io = 12
Found initrd at 0xc000000001500000:0xc000000001763000
Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x32
Mapped at 0xd000080080000000
Found a K2 mac-io controller, rev: 32, mapped at 0xd000080080041000
PowerMac motherboard: PowerMac G5
DART: table not allocated, using direct DMA
Starting Linux PPC64 #4 SMP Mon Aug 6 15:40:01 CEST 2007
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x10000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0xc00000000f800000
htab_hash_mask = 0x7fff
-----------------------------------------------------
Linux version 2.6.22.1-ppc64 (geeko@buildhost) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #4 SMP Mon Aug 6 15:40:01 CEST 2007
[boot]0012 Setup Arch
Top of RAM: 0x10000000, Total RAM: 0x10000000
Memory hole size: 0MB
Entering add_active_range(0, 0, 65536) 0 entries of 256 used
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI Host 0, io start: 400000; io end: bfffff
PCI Host 1, io start: 0; io end: 3fffff
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=493, gen1=492
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Zone PFN ranges:
DMA 0 -> 65536
Normal 65536 -> 65536
early_node_map[1] active PFN ranges
0: 0 -> 65536
On node 0 totalpages: 65536
DMA zone: 896 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 64640 pages, LIFO batch:15
Normal zone: 0 pages used for memmap
[boot]0015 Setup Done
Built 1 zonelists. Total pages: 64640
Kernel command line:
mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
mpic: ISU size: 120, shift: 7, mask: 7f
mpic: Initializing for 120 sources
PID hash table entries: 1024 (order: 10, 8192 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency = 1600.000000 MHz
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
freeing bootmem node 0
Memory: 242692k/262144k available (5920k kernel code, 19452k reserved, 1384k data, 1103k bss, 292k init)
Calibrating delay loop... 66.56 BogoMIPS (lpj=332800)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
PowerMac SMP probe found 1 cpus
Brought up 1 CPUs
NET: Registered protocol family 16
KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000
channel 0 bus <multibus>
channel 1 bus <multibus>
KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
channel 0 bus <multibus>
PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
channel 1 bus <multibus>
channel 2 bus <multibus>
CPU Hotplug not supported by firmware - disabling.
PCI: Probing PCI hardware
pci_device_add() '0000:f0:0b.0' c000000001978860 00000000ffffffff
pci_device_add() '0000:f0:10.0' c00000000ff41860 00000000ffffffff
pci_device_add() '0001:00:01.0' c00000000ff41060 0000000000000000
pci_device_add() '0001:06:03.0' c00000000ff47860 0000000000000000
pci_device_add() '0001:00:02.0' c00000000ff47060 0000000000000000
Can't get ranges for PCI-PCI bridge /ht@0,f2000000/pci@2
pci_device_add() '0001:00:03.0' c00000000ff48860 0000000000000000
pci_device_add() '0001:01:07.0' c00000000ff48060 0000000000000000
pci_device_add() '0001:01:08.0' c00000000ff4b860 0000000000000000
pci_device_add() '0001:01:09.0' c00000000ff4b060 0000000000000000
pci_device_add() '0001:00:04.0' c00000000ff6c860 0000000000000000
pci_device_add() '0001:02:0b.0' c00000000ff6c060 0000000000000000
pci_device_add() '0001:02:0b.1' c00000000ff6d860 0000000000000000
pci_device_add() '0001:02:0b.2' c00000000ff6d060 0000000000000000
pci_device_add() '0001:00:05.0' c00000000ff6e860 0000000000000000
pci_device_add() '0001:03:0d.0' c00000000ff6e060 0000000000000000
pci_device_add() '0001:03:0e.0' c00000000ff71860 0000000000000000
pci_device_add() '0001:00:06.0' c00000000ff71060 0000000000000000
pci_device_add() '0001:04:0f.0' c00000000ff72860 0000000000000000
pci_device_add() '0001:00:07.0' c00000000ff72060 0000000000000000
pci_device_add() '0001:05:0c.0' c00000000ff73860 0000000000000000
mapping IO f0000000 -> d000080000400000, size: 800000
mapping IO f4000000 -> d000080000000000, size: 400000
PCI: Probing PCI hardware done
Registering pmac pic with sysfs...
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 5, 196608 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 2444k freed
nvram_init: Could not find nvram partition for nvram buffered error logging.
rtas_flash: no firmware flash support
IBM eBus Device Driver
Registering G5 CPU frequency driver
Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
Low: 1301 Mhz, High: 1600 Mhz, Cur: 1600 MHz
audit: initializing netlink socket (disabled)
audit(1186407931.610:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
rpadlpar_io_init: partition not DLPAR capable
nvidiafb: Device ID: 10de0321
nvidiafb: CRTC0 analog not found
nvidiafb: CRTC1 analog found
nvidiafb: EDID found from BUS1
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
nvidiafb: Found OF EDID for head 2
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 1appears to have a CRT attached
nvidiafb: Using CRT on CRTC 1
Trying to im_free nonexistent area (d0000800800c1000)
Console: switching to colour frame buffer device 160x64
nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA8000000)
vio_register_driver: driver hvc_console registering
HVSI: registered 0 devices
Generic RTC Driver v1.07
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
MacIO PCI driver attached to K2 chipset
input: Macintosh mouse button emulation as /class/input/input0
PowerMac G5 Thermal control driver 1.3
adb: starting probe task...
adb: finished probe task...
Detected fan controls:
0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
1: RPM fan, id 2, location: DRIVE BAY
2: PWM fan, id 2, location: SLOT,PCI FAN
3: RPM fan, id 3, location: CPU A INTAKE
4: RPM fan, id 4, location: CPU A EXHAUST
5: RPM fan, id 5, location: CPU B INTAKE
6: RPM fan, id 6, location: CPU B EXHAUST
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI: Enabling device: (0001:03:0d.0), cmd 16
ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive
hda: Enabling Ultra DMA 2
ide0 at 0xd00008008729a000-0xd00008008729a007,0xd00008008729a160 on irq 39
PCI: Enabling device: (0001:02:0b.2), cmd 6
ehci_hcd 0001:02:0b.2: EHCI Host Controller
ehci_hcd 0001:02:0b.2: new USB bus registered, assigned bus number 1
ehci_hcd 0001:02:0b.2: irq 63, io mem 0x80100000
ehci_hcd 0001:02:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.1-ppc64 ehci_hcd
usb usb1: SerialNumber: 0001:02:0b.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
PCI: Enabling device: (0001:01:08.0), cmd 2
ohci_hcd 0001:01:08.0: OHCI Host Controller
ohci_hcd 0001:01:08.0: new USB bus registered, assigned bus number 2
ohci_hcd 0001:01:08.0: irq 27, io mem 0x80081000
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
usb usb2: SerialNumber: 0001:01:08.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device: (0001:01:09.0), cmd 2
ohci_hcd 0001:01:09.0: OHCI Host Controller
ohci_hcd 0001:01:09.0: new USB bus registered, assigned bus number 3
ohci_hcd 0001:01:09.0: irq 28, io mem 0x80080000
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
usb usb3: SerialNumber: 0001:01:09.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device: (0001:02:0b.0), cmd 2
ohci_hcd 0001:02:0b.0: OHCI Host Controller
ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 4
ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
usb usb4: SerialNumber: 0001:02:0b.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
PCI: Enabling device: (0001:02:0b.1), cmd 2
ohci_hcd 0001:02:0b.1: OHCI Host Controller
ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 5
ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd
usb usb5: SerialNumber: 0001:02:0b.1
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus u3 1 registered
PowerMac i2c bus u3 0 registered
FCU Initialized, RPM fan shift is 3
usb 5-2: new full speed USB device using ohci_hcd and address 2
usb 5-2: new device found, idVendor=05ac, idProduct=1003
usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: Hub in Apple Extended USB Keyboard
usb 5-2: Manufacturer: Mitsumi Electric
usb 5-2: configuration #1 chosen from 1 choice
hub 5-2:1.0: USB hub found
hub 5-2:1.0: 3 ports detected
usb 5-2.1: new low speed USB device using ohci_hcd and address 3
usb 5-2.1: new device found, idVendor=05ac, idProduct=0307
usb 5-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2.1: Product: Apple Optical USB Mouse
usb 5-2.1: Manufacturer: Logitech
usb 5-2.1: configuration #1 chosen from 1 choice
usb 5-2.3: new full speed USB device using ohci_hcd and address 4
usb 5-2.3: new device found, idVendor=05ac, idProduct=020c
usb 5-2.3: new device strings: Mfr=1, Product=3, SerialNumber=0
usb 5-2.3: Product: Apple Extended USB Keyboard
usb 5-2.3: Manufacturer: Mitsumi Electric
usb 5-2.3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech Apple Optical USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0001:02:0b.1-2.1
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3
input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3
input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3
usbcore: registered new interface driver usbhid
/dev/shm/R/linux-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using ppc64/970 performance monitoring.
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
input: PMU as /class/input/input4
Registered led device: pmu-front-led
Freeing unused kernel memory: 292k freed
SCSI subsystem initialized
libata version 3.00 loaded.
sata_svw 0001:05:0c.0: version 2.2
pci_set_dma_mask() '0001:05:0c.0' c00000000ff73860 00000000ffffffff
scsi0 : sata_svw
scsi1 : sata_svw
scsi2 : sata_svw
scsi3 : sata_svw
ata1: SATA max UDMA/133 cmd 0xd0000800872a1000 ctl 0xd0000800872a1020 bmdma 0xd0000800872a1030 irq 16
ata2: SATA max UDMA/133 cmd 0xd0000800872a1100 ctl 0xd0000800872a1120 bmdma 0xd0000800872a1130 irq 16
ata3: SATA max UDMA/133 cmd 0xd0000800872a1200 ctl 0xd0000800872a1220 bmdma 0xd0000800872a1230 irq 16
ata4: SATA max UDMA/133 cmd 0xd0000800872a1300 ctl 0xd0000800872a1320 bmdma 0xd0000800872a1330 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: ST380013AS, 3.05, max UDMA/133
ata1.00: 156301488 sectors, multi 0: LBA48
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/133
ata2.00: 156312576 sectors, multi 0: LBA
ata2.00: configured for UDMA/133
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.05 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
sd 1:0:0:0: [sdb] Attached SCSI disk
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected Apple U3 chipset
agpgart: configuring for size idx: 8
agpgart: AGP aperture is 32M @ 0x0
tg3.c:v3.77 (May 31, 2007)
PCI: Enabling device: (0001:06:03.0), cmd 6
hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
snd-aoa-fabric-layout: found bus with layout 36
snd-aoa-fabric-layout: Using PMF GPIOs
snd-aoa-codec-tas: found 'deq' node
snd-aoa-fabric-layout: can use this codec
snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
pci_set_dma_mask() '0001:06:03.0' c00000000ff47860 ffffffffffffffff
eth0: Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:64-bit) 10/100/1000Base-T Ethernet 00:04:76:f3:c2:4f
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[76ff2d0f] dma_mask[64-bit]
sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
pci_set_dma_mask() '0001:04:0f.0' c00000000ff72860 00000000ffffffff
PHY ID: 2062e0, addr: 1
eth1: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:a6:5d:66
eth1: Found BCM5421-K2 PHY
pci_set_dma_mask() '0001:03:0e.0' c00000000ff71860 00000000ffffffff
PCI: Enabling device: (0001:03:0e.0), cmd 2
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[80200000-802007ff] Max Packet=[4096] IR/IT contexts=[8/8]
Adding 1023992k swap on /dev/sdb3. Priority:-1 extents:1 across:1023992k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010100305179115]
ieee1394: Host added: ID:BUS[0-01:1023] GUID[000a95fffea65d66]
sbp2_alloc_device():778 dev 'fw-host0' 0000000000000000 parent '0001:03:0e.0' c00000000ff71860 00000000ffffffff
dma_set_mask() '0001:03:0e.0' 00000000ffffffff c0000000005fee68
scsi4 : SBP-2 IEEE-1394
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
REISERFS (device sdb4): found reiserfs format "3.6" with standard journal
REISERFS (device sdb4): using ordered data mode
reiserfs: using flush barriers
REISERFS (device sdb4): journal params: device sdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device sdb4): checking transaction log (sdb4)
REISERFS (device sdb4): Using r5 hash to sort names
eth1: Link is up at 100 Mbps, full-duplex.
AppArmor: AppArmor initialized<5>audit(1186407949.200:2): info="AppArmor initialized" pid=1871
fuse init (API version 7.8)
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-85JS F100 PQ: 0 ANSI: 0
scsi 4:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
sr 4:0:0:0: Attached scsi CD-ROM sr0
audit(1186407951.229:3): operation="file_lock" requested_mask="k" denied_mask="k" name="/var/run/klogd.pid" pid=1949 profile="/sbin/klogd"
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
eth1: Link is up at 100 Mbps, full-duplex.
eth1: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
audit(1186407961.889:4): operation="file_lock" requested_mask="k" denied_mask="k" name="/var/run/klogd.pid" pid=3061 profile="/sbin/klogd"
audit(1186407962.979:5): audit_pid=3113 old=0 by auid=4294967295
next prev parent reply other threads:[~2007-08-06 13:51 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <fa.Qn3Snqoik3hhnxcA6HqjGV0Yzck@ifi.uio.no>
2007-08-04 17:14 ` [PATCH 2.6.22.y] ieee1394: revert "sbp2: enforce 32bit DMA mapping" Robert Hancock
2007-08-04 17:30 ` Stefan Richter
2007-08-04 17:30 ` Stefan Richter
2007-08-05 0:15 ` Benjamin Herrenschmidt
2007-08-05 0:15 ` Benjamin Herrenschmidt
2007-08-05 7:54 ` Stefan Richter
2007-08-05 7:54 ` Stefan Richter
2007-08-05 22:04 ` Benjamin Herrenschmidt
2007-08-05 22:04 ` Benjamin Herrenschmidt
2007-08-06 13:51 ` Olaf Hering [this message]
2007-08-06 13:51 ` Olaf Hering
2007-08-06 21:47 ` Benjamin Herrenschmidt
2007-08-06 21:47 ` Benjamin Herrenschmidt
2007-08-06 22:22 ` Stefan Richter
2007-08-06 22:22 ` Stefan Richter
2007-08-06 22:25 ` Robert Hancock
2007-08-06 22:25 ` Robert Hancock
2007-08-06 22:32 ` Benjamin Herrenschmidt
2007-08-06 22:32 ` Benjamin Herrenschmidt
2007-08-06 22:35 ` Robert Hancock
2007-08-06 22:35 ` Robert Hancock
2007-08-06 22:59 ` Stefan Richter
2007-08-06 22:59 ` Stefan Richter
2007-08-06 22:48 ` Stefan Richter
2007-08-06 22:48 ` Stefan Richter
2007-08-07 2:18 ` Andi Kleen
2007-08-07 2:18 ` Andi Kleen
2007-08-06 22:29 ` Benjamin Herrenschmidt
2007-08-06 22:29 ` Benjamin Herrenschmidt
2007-08-06 11:58 ` Olaf Hering
2007-08-06 11:58 ` Olaf Hering
2007-08-06 21:43 ` Benjamin Herrenschmidt
2007-08-06 21:43 ` Benjamin Herrenschmidt
2007-08-06 22:05 ` [PATCH] powerpc: Fix initialization and usage of dma_mask Benjamin Herrenschmidt
2007-08-06 22:05 ` Benjamin Herrenschmidt
2007-08-06 22:30 ` Olaf Hering
2007-08-06 22:30 ` Olaf Hering
2007-08-04 16:39 [PATCH 2.6.22.y] ieee1394: revert "sbp2: enforce 32bit DMA mapping" Stefan Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20070806135124.GA2900@suse.de \
--to=olh@suse.de \
--cc=benh@kernel.crashing.org \
--cc=hancockr@shaw.ca \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=stable@kernel.org \
--cc=stefanr@s5r6.in-berlin.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.