Re: [PATCH 2.6.22.y] ieee1394: revert "sbp2: enforce 32bit DMA mapping"

[Robert Hancock <hancockr@shaw.ca>]

Stefan Richter wrote:
> Benjamin Herrenschmidt wrote:
>> Oh and, don't do the set_dma_mask() in sbp2, it has nothing to do there.
>> It should be in the ohci1394 driver.
> 
> That's not quite right.  OHCI-1394 implementations can go beyond 4GB bus
> address space.  (Although I don't know if there are such implementations
> available.  At least there are two implementations which can set the
> so-called Physical Range bigger than 4GB.)
> 
> Sbp2 however requires that everything which it DMA-maps resides in the
> Physical Range of the controller.  This way the CPU is not involved in
> most of the data transfers.  The OHCI-1394 controller acts as bus bridge
> between IEEE 1394 bus and local bus, with a 1:1 mapping of IEEE 1394 bus
> addresses to and from local bus addresses --- but not in the whole 48
> bits white IEEE 1394 bus address range, only in the
> implementation-dependent Physical Range.  The minimum Physical Range
> that all OHCI-1394 implementations guarantee is 4GB.  I could actually
> have set a bigger mask in sbp2 when the controller supports a
> programmable bigger range.
> 
> So that's the story why that dma_set_mask went into sbp2:  Sbp2 wants
> mappings in a _subset_ of the OHCI-1394 controllers DMA range.
> 
> Anyway.  For now I will simply go with what 2.6.23-rc has and what
> 2.6.21 had:  No dma_set_mask anywhere in the 1394 subsystem.  We can
> revisit this whenever an actual need arises.

Not sure this is a very good idea. This seems rather likely to fail on 
x86_64 machines with >4GB of RAM for example..

-- 
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/