From: Mike Houston <mikeserv@bmts.com>
To: Adrian Bunk <bunk@stusta.de>
Cc: linux-kernel@vger.kernel.org, mhoffman@lightlink.com,
lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] 2.6.24-rc4 hwmon it87 probe fails
Date: Sun, 09 Dec 2007 02:22:34 +0000 [thread overview]
Message-ID: <20071208212234.e00b74cd.mikeserv@bmts.com> (raw)
In-Reply-To: <20071209000554.GF20441@stusta.de>
On Sun, 9 Dec 2007 01:05:54 +0100
Adrian Bunk <bunk@stusta.de> wrote:
> On Tue, Dec 04, 2007 at 09:51:54PM -0500, Mike Houston wrote:
> > I finally got around to testing Linux 2.6.24 (2.6.24-rc4) and
> > found that the it87 driver fails to probe and consequently, my
> > sensors no longer work. This was fine with Linux 2.6.23.8 (the
> > last kernel I was using)
> >
> > The necessary modules load, but:
> >
> > it87: Found IT8718F chip at 0x290, revision 2
> > it87: in3 is VCC (+5V)
> > it87 it87.656: Failed to request region 0x290-0x297
> > it87: probe of it87.656 failed with error -16
> >
> > Coretemp still works.
> >
> > It appears it has something to do with the ioport range being
> > reserved for some reason:
> >
> > system 00:01: ioport range 0x290-0x29f has been reserved
>
> Thanks for your report.
>
> Please also provide:
> - dmesg from 2.6.23.8
> - The output of "cat /proc/ioports" for both kernels
Thanks Adrian, here is the information you have requested, for
both kernels (I have 2.6.23.9 now though where it87 still works)
Linux 2.6.23.9:
http://www.mikeserv.com/temp/proc_ioports-2.6.23.9.txt
http://www.mikeserv.com/temp/dmesg-2.6.23.9.txt
http://www.mikeserv.com/temp/config-2.6.23.9.txt
Linux 2.6.24-rc4:
http://www.mikeserv.com/temp/proc_ioports-2.6.24-rc4.txt
http://www.mikeserv.com/temp/dmesg-2.6.24-rc4.txt
http://www.mikeserv.com/temp/config-2.6.24-rc4.txt
Mike Houston
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Mike Houston <mikeserv@bmts.com>
To: Adrian Bunk <bunk@stusta.de>
Cc: linux-kernel@vger.kernel.org, mhoffman@lightlink.com,
lm-sensors@lm-sensors.org
Subject: Re: 2.6.24-rc4 hwmon it87 probe fails
Date: Sat, 8 Dec 2007 21:22:34 -0500 [thread overview]
Message-ID: <20071208212234.e00b74cd.mikeserv@bmts.com> (raw)
In-Reply-To: <20071209000554.GF20441@stusta.de>
On Sun, 9 Dec 2007 01:05:54 +0100
Adrian Bunk <bunk@stusta.de> wrote:
> On Tue, Dec 04, 2007 at 09:51:54PM -0500, Mike Houston wrote:
> > I finally got around to testing Linux 2.6.24 (2.6.24-rc4) and
> > found that the it87 driver fails to probe and consequently, my
> > sensors no longer work. This was fine with Linux 2.6.23.8 (the
> > last kernel I was using)
> >
> > The necessary modules load, but:
> >
> > it87: Found IT8718F chip at 0x290, revision 2
> > it87: in3 is VCC (+5V)
> > it87 it87.656: Failed to request region 0x290-0x297
> > it87: probe of it87.656 failed with error -16
> >
> > Coretemp still works.
> >
> > It appears it has something to do with the ioport range being
> > reserved for some reason:
> >
> > system 00:01: ioport range 0x290-0x29f has been reserved
>
> Thanks for your report.
>
> Please also provide:
> - dmesg from 2.6.23.8
> - The output of "cat /proc/ioports" for both kernels
Thanks Adrian, here is the information you have requested, for
both kernels (I have 2.6.23.9 now though where it87 still works)
Linux 2.6.23.9:
http://www.mikeserv.com/temp/proc_ioports-2.6.23.9.txt
http://www.mikeserv.com/temp/dmesg-2.6.23.9.txt
http://www.mikeserv.com/temp/config-2.6.23.9.txt
Linux 2.6.24-rc4:
http://www.mikeserv.com/temp/proc_ioports-2.6.24-rc4.txt
http://www.mikeserv.com/temp/dmesg-2.6.24-rc4.txt
http://www.mikeserv.com/temp/config-2.6.24-rc4.txt
Mike Houston
next prev parent reply other threads:[~2007-12-09 2:22 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-05 2:51 2.6.24-rc4 hwmon it87 probe fails Mike Houston
2007-12-09 0:05 ` [lm-sensors] " Adrian Bunk
2007-12-09 0:05 ` Adrian Bunk
2007-12-09 2:22 ` Mike Houston [this message]
2007-12-09 2:22 ` Mike Houston
2007-12-09 9:50 ` [lm-sensors] " Jean Delvare
2007-12-09 9:50 ` Jean Delvare
2007-12-09 19:40 ` Mike Houston
2007-12-09 19:40 ` Mike Houston
2007-12-09 21:12 ` Elvis Pranskevichus
2007-12-09 21:12 ` Elvis Pranskevichus
2007-12-09 22:04 ` Adrian Bunk
2007-12-09 22:04 ` Adrian Bunk
2007-12-10 2:31 ` Shaohua Li
2007-12-10 2:31 ` Shaohua Li
2007-12-10 2:49 ` Elvis Pranskevichus
2007-12-10 2:49 ` Elvis Pranskevichus
2007-12-10 4:02 ` Mike Houston
2007-12-10 4:02 ` Mike Houston
2007-12-17 1:59 ` Shaohua Li
2007-12-17 1:59 ` Shaohua Li
2007-12-17 17:14 ` Bjorn Helgaas
2007-12-17 17:14 ` Bjorn Helgaas
2007-12-18 17:59 ` Jean Delvare
2007-12-18 17:59 ` Jean Delvare
2007-12-20 0:20 ` Bjorn Helgaas
2007-12-20 0:20 ` Bjorn Helgaas
2007-12-20 0:45 ` Carlos Corbacho
2007-12-20 0:45 ` Carlos Corbacho
2007-12-20 2:13 ` Elvis Pranskevichus
2007-12-20 2:13 ` Elvis Pranskevichus
2007-12-20 2:17 ` Carlos Corbacho
2007-12-20 2:17 ` Carlos Corbacho
2007-12-21 19:00 ` Bjorn Helgaas
2007-12-21 19:00 ` Bjorn Helgaas
2007-12-21 19:50 ` Mike Houston
2007-12-21 19:50 ` Mike Houston
2007-12-22 11:21 ` Jean Delvare
2007-12-22 11:21 ` [lm-sensors] " Jean Delvare
2007-12-22 11:21 ` Jean Delvare
2007-12-23 3:40 ` Bjorn Helgaas
2007-12-23 3:40 ` Bjorn Helgaas
2007-12-23 9:28 ` Jean Delvare
2007-12-23 9:28 ` Jean Delvare
2007-12-23 9:28 ` Jean Delvare
2007-12-23 23:14 ` Bjorn Helgaas
2007-12-23 23:14 ` Bjorn Helgaas
2007-12-23 23:14 ` Bjorn Helgaas
2007-12-25 21:31 ` Jean Delvare
2007-12-25 21:31 ` Jean Delvare
2007-12-25 21:31 ` [lm-sensors] " Jean Delvare
2008-01-02 18:30 ` Bjorn Helgaas
2008-01-02 18:30 ` Bjorn Helgaas
2008-01-02 18:30 ` [lm-sensors] " Bjorn Helgaas
2008-01-12 9:49 ` Jean Delvare
2008-01-12 9:49 ` [lm-sensors] " Jean Delvare
2007-12-19 23:53 ` Bjorn Helgaas
2007-12-19 23:53 ` Bjorn Helgaas
2007-12-09 22:42 ` Jean Delvare
2007-12-09 22:42 ` Jean Delvare
2007-12-09 23:15 ` Mike Houston
2007-12-09 23:15 ` Mike Houston
2007-12-10 0:19 ` Mike Houston
2007-12-10 0:19 ` Mike Houston
2007-12-10 1:32 ` Ed Sweetman
2007-12-10 1:32 ` Ed Sweetman
2007-12-10 14:55 ` Jean Delvare
2007-12-10 14:55 ` Jean Delvare
2007-12-10 1:10 ` [lm-sensors] " Stephen Cormier
[not found] <fa.QPUBl9Xd2PDsImgWn6hbR+ShV1U@ifi.uio.no>
[not found] ` <fa.ri5Klmu4+MwjYC8x5nSms+xKXfI@ifi.uio.no>
[not found] ` <fa.B/J+j9kGGZ1+gW9FrfHky+cj0Eo@ifi.uio.no>
[not found] ` <fa.Xv3BmMxnCGLOeEijySte5mKDO5k@ifi.uio.no>
2007-12-20 1:09 ` Robert Hancock
2007-12-20 1:09 ` Robert Hancock
2008-01-12 9:56 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071208212234.e00b74cd.mikeserv@bmts.com \
--to=mikeserv@bmts.com \
--cc=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mhoffman@lightlink.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.