From: Elvis Pranskevichus <el@prans.net>
To: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>,
Jean Delvare <khali@linux-fr.org>,
Shaohua Li <shaohua.li@intel.com>,
Mike Houston <mikeserv@bmts.com>, Adrian Bunk <bunk@stusta.de>,
mhoffman@lightlink.com, linux-kernel@vger.kernel.org,
lm-sensors@lm-sensors.org, Adam Belay <ambx1@neo.rr.com>,
Zhao Yakui <yakui.zhao@intel.com>,
Thomas Renninger <trenn@suse.de>,
lenb@kernel.org, linux-acpi@vger.kernel.org
Subject: Re: [lm-sensors] 2.6.24-rc4 hwmon it87 probe fails
Date: Wed, 19 Dec 2007 21:13:22 -0500 [thread overview]
Message-ID: <200712192113.22974.el@prans.net> (raw)
In-Reply-To: <200712200045.16899.carlos@strangeworlds.co.uk>
On Wednesday December 19 2007 07:45:14 pm Carlos Corbacho wrote:
> On Thursday 20 December 2007 00:20:21 Bjorn Helgaas wrote:
> > I suspect the manufacturers would say "Oh, the sensors? The BIOS
> > isn't broken, you're just supposed to use WMI or some (undocumented)
> > ACPI device to get at those."
>
> It's quite possible - can we have DSDTs for the boards in question so we
> can quickly check if this is a possibility? (Basically, to see if they have
> PNP0C14 devices - if they don't, then I'm afraid it's nothing to do with
> WMI).
>
> -Carlos
Hi Carlos,
I've attached the DSDT for Gigabyte GA-965G-DS3 (rev 1.0, bios rev. F9) to
bugzilla entry #9514:
http://bugzilla.kernel.org/attachment.cgi?id=14132
Thanks,
--
Elvis
WARNING: multiple messages have this Message-ID (diff)
From: Elvis Pranskevichus <el@prans.net>
To: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>,
Jean Delvare <khali@linux-fr.org>,
Shaohua Li <shaohua.li@intel.com>,
Mike Houston <mikeserv@bmts.com>, Adrian Bunk <bunk@stusta.de>,
mhoffman@lightlink.com, linux-kernel@vger.kernel.org,
lm-sensors@lm-sensors.org, Adam Belay <ambx1@neo.rr.com>,
Zhao Yakui <yakui.zhao@intel.com>,
Thomas Renninger <trenn@suse.de>,
lenb@kernel.org, linux-acpi@vger.kernel.org
Subject: Re: [lm-sensors] 2.6.24-rc4 hwmon it87 probe fails
Date: Thu, 20 Dec 2007 02:13:22 +0000 [thread overview]
Message-ID: <200712192113.22974.el@prans.net> (raw)
In-Reply-To: <200712200045.16899.carlos@strangeworlds.co.uk>
On Wednesday December 19 2007 07:45:14 pm Carlos Corbacho wrote:
> On Thursday 20 December 2007 00:20:21 Bjorn Helgaas wrote:
> > I suspect the manufacturers would say "Oh, the sensors? The BIOS
> > isn't broken, you're just supposed to use WMI or some (undocumented)
> > ACPI device to get at those."
>
> It's quite possible - can we have DSDTs for the boards in question so we
> can quickly check if this is a possibility? (Basically, to see if they have
> PNP0C14 devices - if they don't, then I'm afraid it's nothing to do with
> WMI).
>
> -Carlos
Hi Carlos,
I've attached the DSDT for Gigabyte GA-965G-DS3 (rev 1.0, bios rev. F9) to
bugzilla entry #9514:
http://bugzilla.kernel.org/attachment.cgi?id\x14132
Thanks,
--
Elvis
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2007-12-20 2:13 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-05 2:51 2.6.24-rc4 hwmon it87 probe fails Mike Houston
2007-12-09 0:05 ` [lm-sensors] " Adrian Bunk
2007-12-09 0:05 ` Adrian Bunk
2007-12-09 2:22 ` [lm-sensors] " Mike Houston
2007-12-09 2:22 ` Mike Houston
2007-12-09 9:50 ` [lm-sensors] " Jean Delvare
2007-12-09 9:50 ` Jean Delvare
2007-12-09 19:40 ` Mike Houston
2007-12-09 19:40 ` Mike Houston
2007-12-09 21:12 ` Elvis Pranskevichus
2007-12-09 21:12 ` Elvis Pranskevichus
2007-12-09 22:04 ` Adrian Bunk
2007-12-09 22:04 ` Adrian Bunk
2007-12-10 2:31 ` Shaohua Li
2007-12-10 2:31 ` Shaohua Li
2007-12-10 2:49 ` Elvis Pranskevichus
2007-12-10 2:49 ` Elvis Pranskevichus
2007-12-10 4:02 ` Mike Houston
2007-12-10 4:02 ` Mike Houston
2007-12-17 1:59 ` Shaohua Li
2007-12-17 1:59 ` Shaohua Li
2007-12-17 17:14 ` Bjorn Helgaas
2007-12-17 17:14 ` Bjorn Helgaas
2007-12-18 17:59 ` Jean Delvare
2007-12-18 17:59 ` Jean Delvare
2007-12-20 0:20 ` Bjorn Helgaas
2007-12-20 0:20 ` Bjorn Helgaas
2007-12-20 0:45 ` Carlos Corbacho
2007-12-20 0:45 ` Carlos Corbacho
2007-12-20 2:13 ` Elvis Pranskevichus [this message]
2007-12-20 2:13 ` Elvis Pranskevichus
2007-12-20 2:17 ` Carlos Corbacho
2007-12-20 2:17 ` Carlos Corbacho
2007-12-21 19:00 ` Bjorn Helgaas
2007-12-21 19:00 ` Bjorn Helgaas
2007-12-21 19:50 ` Mike Houston
2007-12-21 19:50 ` Mike Houston
2007-12-22 11:21 ` Jean Delvare
2007-12-22 11:21 ` [lm-sensors] " Jean Delvare
2007-12-22 11:21 ` Jean Delvare
2007-12-23 3:40 ` Bjorn Helgaas
2007-12-23 3:40 ` Bjorn Helgaas
2007-12-23 9:28 ` Jean Delvare
2007-12-23 9:28 ` Jean Delvare
2007-12-23 9:28 ` Jean Delvare
2007-12-23 23:14 ` Bjorn Helgaas
2007-12-23 23:14 ` Bjorn Helgaas
2007-12-23 23:14 ` Bjorn Helgaas
2007-12-25 21:31 ` Jean Delvare
2007-12-25 21:31 ` Jean Delvare
2007-12-25 21:31 ` [lm-sensors] " Jean Delvare
2008-01-02 18:30 ` Bjorn Helgaas
2008-01-02 18:30 ` Bjorn Helgaas
2008-01-02 18:30 ` [lm-sensors] " Bjorn Helgaas
2008-01-12 9:49 ` Jean Delvare
2008-01-12 9:49 ` [lm-sensors] " Jean Delvare
2007-12-19 23:53 ` Bjorn Helgaas
2007-12-19 23:53 ` Bjorn Helgaas
2007-12-09 22:42 ` Jean Delvare
2007-12-09 22:42 ` Jean Delvare
2007-12-09 23:15 ` Mike Houston
2007-12-09 23:15 ` Mike Houston
2007-12-10 0:19 ` Mike Houston
2007-12-10 0:19 ` Mike Houston
2007-12-10 1:32 ` Ed Sweetman
2007-12-10 1:32 ` Ed Sweetman
2007-12-10 14:55 ` Jean Delvare
2007-12-10 14:55 ` Jean Delvare
2007-12-10 1:10 ` [lm-sensors] " Stephen Cormier
[not found] <fa.QPUBl9Xd2PDsImgWn6hbR+ShV1U@ifi.uio.no>
[not found] ` <fa.ri5Klmu4+MwjYC8x5nSms+xKXfI@ifi.uio.no>
[not found] ` <fa.B/J+j9kGGZ1+gW9FrfHky+cj0Eo@ifi.uio.no>
[not found] ` <fa.Xv3BmMxnCGLOeEijySte5mKDO5k@ifi.uio.no>
2007-12-20 1:09 ` Robert Hancock
2007-12-20 1:09 ` Robert Hancock
2008-01-12 9:56 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200712192113.22974.el@prans.net \
--to=el@prans.net \
--cc=ambx1@neo.rr.com \
--cc=bjorn.helgaas@hp.com \
--cc=bunk@stusta.de \
--cc=carlos@strangeworlds.co.uk \
--cc=khali@linux-fr.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mhoffman@lightlink.com \
--cc=mikeserv@bmts.com \
--cc=shaohua.li@intel.com \
--cc=trenn@suse.de \
--cc=yakui.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.