Re: [PATCH] x86: provide a DMI based port 0x80 I/O delay override.

[Ingo Molnar <mingo@elte.hu>]

* Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:

> > there strong counter-arguments against doing the clean thing and 
> > adding an udelay(2) (or udelay(1)) to replace those _p() uses in ISA 
> > drivers?
> 
> #1 udelay has to be for the worst case bus clock (6MHz) while the 
> #device may be at 10Mhz or even 12MHz ISA. So it slows it down stuff
> unneccessarily- and stuff that really really is slow enough as is.

udelay is supposed to be reliable. If someone runs a new kernel and has 
no TSC (which might happen even on modern hardware or with notsc) _and_ 
finds that udelay is not calibrated well enough then that's a kernel bug 
we want to fix.

> #2 Most of the ancient wind up relics with ISA bus don't have a tsc so
> their udelay value is kind of iffy.

iffy in what way? Again, we might be hiding real udelay bugs.

> #3 Not changing it is the lowest risk for a lot of the old ISA code 
> #that never occurs on newer boxes

Not changing the kernel _at all_ is what is the "lowest risk" option. If 
the kernel is changed, it should be tested - and if we have a buggy 
udelay, that should be fixed - because it could cause many other bugs in 
other drivers.

yes, there are always risks in changing something, but using udelay is a 
common-sense consolidation of code.

> > _will_ change a bit, no matter what we do. Alignments change, the 
> > compiler output will change (old compilers get deprecated so a new 
> > compiler might have to be picked), cache effects change - and this 
> > is inevitable. The important thing is to not eliminate the delays - 
> > but we sure dont have to keep them cycle accurate (we couldnt even 
> > if we wanted to). The only way to get the _exact same_ behavior is 
> > to not change the kernel at all.
> 
> ISA bus cycles are *slow*, the subtle processor cache and gcc 
> triggered timing changes are lost in the noise.

gcc triggered timing changes can easily add up to a LOT more - 
especially if a loop is involved and especially on older hardware. 
Remember, 1 microsecond is just a handful of instructions on real old 
hardware. The kernel's timings are _not_ immutable, never were, never 
will be.

	Ingo