All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Stephen Rothwell <sfr@canb.auug.org.au>,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git pull] IDE fixes
Date: Mon, 2 Feb 2009 20:48:10 +0100	[thread overview]
Message-ID: <200902022048.10264.bzolnier@gmail.com> (raw)

Inside:

- ide-cd bug fix for non-bio backed requests from Borislav Petkov
  (closes kernel.org bug #12320).

- icside bug fix to make it work again on PCB v6.

- Port initialization failure handling fix from Ian Campbell.

- Support for CS5536 PATA controller (based on older driver
  from Martin K. Petersen, also extra thanks to Sergei Shtylyov
  for excellent review of the new driver).

- Support for AmigaOne board for VIA IDE host driver
  from Gerhard Pircher.

- dev->bus_id -> dev_name() conversion from Kay Sievers.

- tx4939ide update from Atsushi Nemoto.


Linus, please pull from:

master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git/

to receive the following updates:

 drivers/ide/Kconfig     |   10 ++
 drivers/ide/Makefile    |    1 +
 drivers/ide/cs5536.c    |  308 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/ide/icside.c    |    2 +-
 drivers/ide/ide-acpi.c  |    2 +-
 drivers/ide/ide-cd.c    |    3 +
 drivers/ide/ide-io.c    |    9 +-
 drivers/ide/ide-probe.c |   43 +++++--
 drivers/ide/tx4939ide.c |    4 +-
 drivers/ide/via82cxxx.c |    5 +
 10 files changed, 371 insertions(+), 16 deletions(-)
 create mode 100644 drivers/ide/cs5536.c


Atsushi Nemoto (1):
      tx4939ide: typo fix and minor cleanup

Bartlomiej Zolnierkiewicz (3):
      ide: fix ide_register_port() failure handling
      ide: add CS5536 host driver (v3)
      icside: fix PCB version 6 support (v2)

Borislav Petkov (1):
      ide-cd: fix DMA for non bio-backed requests

Gerhard Pircher (1):
      ide: Force VIA IDE legacy interrupts for AmigaOne boards

Ian Campbell (1):
      IDE: Unregister and disable devices if initialization fails.

Kay Sievers (1):
      ide: struct device - replace bus_id with dev_name(), dev_set_name()


diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b1c6f68..3dad229 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -465,6 +465,16 @@ config BLK_DEV_CS5535
 
 	  It is safe to say Y to this question.
 
+config BLK_DEV_CS5536
+	tristate "CS5536 chipset support"
+	depends on X86_32
+	select BLK_DEV_IDEDMA_PCI
+	help
+	  This option enables support for the AMD CS5536
+	  companion chip used with the Geode LX processor family.
+
+	  If unsure, say N.
+
 config BLK_DEV_HPT366
 	tristate "HPT36X/37X chipset support"
 	select BLK_DEV_IDEDMA_PCI
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index c2b9c93..d0e3d7d 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_BLK_DEV_CMD64X)		+= cmd64x.o
 obj-$(CONFIG_BLK_DEV_CS5520)		+= cs5520.o
 obj-$(CONFIG_BLK_DEV_CS5530)		+= cs5530.o
 obj-$(CONFIG_BLK_DEV_CS5535)		+= cs5535.o
+obj-$(CONFIG_BLK_DEV_CS5536)		+= cs5536.o
 obj-$(CONFIG_BLK_DEV_SC1200)		+= sc1200.o
 obj-$(CONFIG_BLK_DEV_CY82C693)		+= cy82c693.o
 obj-$(CONFIG_BLK_DEV_DELKIN)		+= delkin_cb.o
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c
new file mode 100644
index 0000000..7a62db7
--- /dev/null
+++ b/drivers/ide/cs5536.c
@@ -0,0 +1,308 @@
+/*
+ * CS5536 PATA support
+ * (C) 2007 Martin K. Petersen <mkp@mkp.net>
+ * (C) 2009 Bartlomiej Zolnierkiewicz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Documentation:
+ *	Available from AMD web site.
+ *
+ * The IDE timing registers for the CS5536 live in the Geode Machine
+ * Specific Register file and not PCI config space.  Most BIOSes
+ * virtualize the PCI registers so the chip looks like a standard IDE
+ * controller.  Unfortunately not all implementations get this right.
+ * In particular some have problems with unaligned accesses to the
+ * virtualized PCI registers.  This driver always does full dword
+ * writes to work around the issue.  Also, in case of a bad BIOS this
+ * driver can be loaded with the "msr=1" parameter which forces using
+ * the Machine Specific Registers to configure the device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <asm/msr.h>
+
+#define DRV_NAME	"cs5536"
+
+enum {
+	MSR_IDE_CFG		= 0x51300010,
+	PCI_IDE_CFG		= 0x40,
+
+	CFG			= 0,
+	DTC			= 2,
+	CAST			= 3,
+	ETC			= 4,
+
+	IDE_CFG_CHANEN		= (1 << 1),
+	IDE_CFG_CABLE		= (1 << 17) | (1 << 16),
+
+	IDE_D0_SHIFT		= 24,
+	IDE_D1_SHIFT		= 16,
+	IDE_DRV_MASK		= 0xff,
+
+	IDE_CAST_D0_SHIFT	= 6,
+	IDE_CAST_D1_SHIFT	= 4,
+	IDE_CAST_DRV_MASK	= 0x3,
+
+	IDE_CAST_CMD_SHIFT	= 24,
+	IDE_CAST_CMD_MASK	= 0xff,
+
+	IDE_ETC_UDMA_MASK	= 0xc0,
+};
+
+static int use_msr;
+
+static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
+{
+	if (unlikely(use_msr)) {
+		u32 dummy;
+
+		rdmsr(MSR_IDE_CFG + reg, *val, dummy);
+		return 0;
+	}
+
+	return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static int cs5536_write(struct pci_dev *pdev, int reg, int val)
+{
+	if (unlikely(use_msr)) {
+		wrmsr(MSR_IDE_CFG + reg, val, 0);
+		return 0;
+	}
+
+	return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
+}
+
+static void cs5536_program_dtc(ide_drive_t *drive, u8 tim)
+{
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	u32 dtc;
+
+	cs5536_read(pdev, DTC, &dtc);
+	dtc &= ~(IDE_DRV_MASK << dshift);
+	dtc |= tim << dshift;
+	cs5536_write(pdev, DTC, dtc);
+}
+
+/**
+ *	cs5536_cable_detect	-	detect cable type
+ *	@hwif: Port to detect on
+ *
+ *	Perform cable detection for ATA66 capable cable.
+ *
+ *	Returns a cable type.
+ */
+
+static u8 cs5536_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
+	u32 cfg;
+
+	cs5536_read(pdev, CFG, &cfg);
+
+	if (cfg & IDE_CFG_CABLE)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
+/**
+ *	cs5536_set_pio_mode		-	PIO timing setup
+ *	@drive: ATA device
+ *	@pio: PIO mode number
+ */
+
+static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	static const u8 drv_timings[5] = {
+		0x98, 0x55, 0x32, 0x21, 0x20,
+	};
+
+	static const u8 addr_timings[5] = {
+		0x2, 0x1, 0x0, 0x0, 0x0,
+	};
+
+	static const u8 cmd_timings[5] = {
+		0x99, 0x92, 0x90, 0x22, 0x20,
+	};
+
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	ide_drive_t *pair = ide_get_pair_dev(drive);
+	int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
+	u32 cast;
+	u8 cmd_pio = pio;
+
+	if (pair)
+		cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4));
+
+	drive->drive_data &= (IDE_DRV_MASK << 8);
+	drive->drive_data |= drv_timings[pio];
+
+	cs5536_program_dtc(drive, drv_timings[pio]);
+
+	cs5536_read(pdev, CAST, &cast);
+
+	cast &= ~(IDE_CAST_DRV_MASK << cshift);
+	cast |= addr_timings[pio] << cshift;
+
+	cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
+	cast |= cmd_timings[cmd_pio] << IDE_CAST_CMD_SHIFT;
+
+	cs5536_write(pdev, CAST, cast);
+}
+
+/**
+ *	cs5536_set_dma_mode		-	DMA timing setup
+ *	@drive: ATA device
+ *	@mode: DMA mode
+ */
+
+static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+	static const u8 udma_timings[6] = {
+		0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
+	};
+
+	static const u8 mwdma_timings[3] = {
+		0x67, 0x21, 0x20,
+	};
+
+	struct pci_dev *pdev = to_pci_dev(drive->hwif->dev);
+	int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT;
+	u32 etc;
+
+	cs5536_read(pdev, ETC, &etc);
+
+	if (mode >= XFER_UDMA_0) {
+		etc &= ~(IDE_DRV_MASK << dshift);
+		etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
+	} else { /* MWDMA */
+		etc &= ~(IDE_ETC_UDMA_MASK << dshift);
+		drive->drive_data &= IDE_DRV_MASK;
+		drive->drive_data |= mwdma_timings[mode - XFER_MW_DMA_0] << 8;
+	}
+
+	cs5536_write(pdev, ETC, etc);
+}
+
+static void cs5536_dma_start(ide_drive_t *drive)
+{
+	if (drive->current_speed < XFER_UDMA_0 &&
+	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, drive->drive_data >> 8);
+
+	ide_dma_start(drive);
+}
+
+static int cs5536_dma_end(ide_drive_t *drive)
+{
+	int ret = ide_dma_end(drive);
+
+	if (drive->current_speed < XFER_UDMA_0 &&
+	    (drive->drive_data >> 8) != (drive->drive_data & IDE_DRV_MASK))
+		cs5536_program_dtc(drive, drive->drive_data & IDE_DRV_MASK);
+
+	return ret;
+}
+
+static const struct ide_port_ops cs5536_port_ops = {
+	.set_pio_mode		= cs5536_set_pio_mode,
+	.set_dma_mode		= cs5536_set_dma_mode,
+	.cable_detect		= cs5536_cable_detect,
+};
+
+static const struct ide_dma_ops cs5536_dma_ops = {
+	.dma_host_set		= ide_dma_host_set,
+	.dma_setup		= ide_dma_setup,
+	.dma_exec_cmd		= ide_dma_exec_cmd,
+	.dma_start		= cs5536_dma_start,
+	.dma_end		= cs5536_dma_end,
+	.dma_test_irq		= ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timeout		= ide_dma_timeout,
+};
+
+static const struct ide_port_info cs5536_info = {
+	.name		= DRV_NAME,
+	.port_ops	= &cs5536_port_ops,
+	.dma_ops	= &cs5536_dma_ops,
+	.host_flags	= IDE_HFLAG_SINGLE,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA5,
+};
+
+/**
+ *	cs5536_init_one
+ *	@dev: PCI device
+ *	@id: Entry in match table
+ */
+
+static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	u32 cfg;
+
+	if (use_msr)
+		printk(KERN_INFO DRV_NAME ": Using MSR regs instead of PCI\n");
+
+	cs5536_read(dev, CFG, &cfg);
+
+	if ((cfg & IDE_CFG_CHANEN) == 0) {
+		printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
+		return -ENODEV;
+	}
+
+	return ide_pci_init_one(dev, &cs5536_info, NULL);
+}
+
+static const struct pci_device_id cs5536_pci_tbl[] = {
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
+	{ },
+};
+
+static struct pci_driver cs5536_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= cs5536_pci_tbl,
+	.probe		= cs5536_init_one,
+	.remove		= ide_pci_remove,
+	.suspend	= ide_pci_suspend,
+	.resume		= ide_pci_resume,
+};
+
+static int __init cs5536_init(void)
+{
+	return pci_register_driver(&cs5536_pci_driver);
+}
+
+static void __exit cs5536_exit(void)
+{
+	pci_unregister_driver(&cs5536_pci_driver);
+}
+
+MODULE_AUTHOR("Martin K. Petersen, Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, cs5536_pci_tbl);
+
+module_param_named(msr, use_msr, int, 0644);
+MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+
+module_init(cs5536_init);
+module_exit(cs5536_exit);
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 97a35c6..415d7e2 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -534,7 +534,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 		d.dma_ops = NULL;
 	}
 
-	ret = ide_host_register(host, NULL, hws);
+	ret = ide_host_register(host, &d, hws);
 	if (ret)
 		goto err_free;
 
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index d8f295b..ec7d07f 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -282,7 +282,7 @@ static int do_drive_get_GTF(ide_drive_t *drive,
 	port = hwif->channel ? drive->dn - 2: drive->dn;
 
 	DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
-		 hwif->name, dev->bus_id, port, hwif->channel);
+		 hwif->name, dev_name(dev), port, hwif->channel);
 
 	if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) {
 		DEBPRINT("%s drive %d:%d not present\n",
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index cae6937..0bfeb0c 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -787,6 +787,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
 		if (blk_fs_request(rq)) {
 			ide_end_request(drive, 1, rq->nr_sectors);
 			return ide_stopped;
+		} else if (rq->cmd_type == REQ_TYPE_ATA_PC && !rq->bio) {
+			ide_end_request(drive, 1, 1);
+			return ide_stopped;
 		}
 		goto end_request;
 	}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index cc16331..9ee51ad 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -418,11 +418,14 @@ void ide_map_sg(ide_drive_t *drive, struct request *rq)
 	ide_hwif_t *hwif = drive->hwif;
 	struct scatterlist *sg = hwif->sg_table;
 
-	if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
-		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
-	} else {
+	if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
 		sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
 		hwif->sg_nents = 1;
+	} else if (!rq->bio) {
+		sg_init_one(sg, rq->data, rq->data_len);
+		hwif->sg_nents = 1;
+	} else {
+		hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
 	}
 }
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 0db1ed9..ce0818a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1467,6 +1467,30 @@ struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
 }
 EXPORT_SYMBOL_GPL(ide_host_alloc);
 
+static void ide_port_free(ide_hwif_t *hwif)
+{
+	ide_port_free_devices(hwif);
+	ide_free_port_slot(hwif->index);
+	kfree(hwif);
+}
+
+static void ide_disable_port(ide_hwif_t *hwif)
+{
+	struct ide_host *host = hwif->host;
+	int i;
+
+	printk(KERN_INFO "%s: disabling port\n", hwif->name);
+
+	for (i = 0; i < MAX_HOST_PORTS; i++) {
+		if (host->ports[i] == hwif) {
+			host->ports[i] = NULL;
+			host->n_ports--;
+		}
+	}
+
+	ide_port_free(hwif);
+}
+
 int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		      hw_regs_t **hws)
 {
@@ -1507,8 +1531,12 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 			hwif->present = 1;
 
 		if (hwif->chipset != ide_4drives || !hwif->mate ||
-		    !hwif->mate->present)
-			ide_register_port(hwif);
+		    !hwif->mate->present) {
+			if (ide_register_port(hwif)) {
+				ide_disable_port(hwif);
+				continue;
+			}
+		}
 
 		if (hwif->present)
 			ide_port_tune_devices(hwif);
@@ -1521,7 +1549,8 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		if (hwif_init(hwif) == 0) {
 			printk(KERN_INFO "%s: failed to initialize IDE "
 					 "interface\n", hwif->name);
-			hwif->present = 0;
+			device_unregister(&hwif->gendev);
+			ide_disable_port(hwif);
 			continue;
 		}
 
@@ -1660,12 +1689,8 @@ void ide_host_free(struct ide_host *host)
 	int i;
 
 	ide_host_for_each_port(i, hwif, host) {
-		if (hwif == NULL)
-			continue;
-
-		ide_port_free_devices(hwif);
-		ide_free_port_slot(hwif->index);
-		kfree(hwif);
+		if (hwif)
+			ide_port_free(hwif);
 	}
 
 	kfree(host);
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c
index 882f6f0..40b0812 100644
--- a/drivers/ide/tx4939ide.c
+++ b/drivers/ide/tx4939ide.c
@@ -261,9 +261,9 @@ static int tx4939ide_build_dmatable(ide_drive_t *drive, struct request *rq)
 				bcount = cur_len;
 			/*
 			 * This workaround for zero count seems required.
-			 * (standard ide_build_dmatable do it too)
+			 * (standard ide_build_dmatable does it too)
 			 */
-			if ((bcount & 0xffff) == 0x0000)
+			if (bcount == 0x10000)
 				bcount = 0x8000;
 			*table++ = bcount & 0xffff;
 			*table++ = cur_addr;
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 703c3ee..6092fe3 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -448,6 +448,11 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 		d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
 #endif
 
+#ifdef CONFIG_AMIGAONE
+	if (machine_is(amigaone))
+		d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
+#endif
+
 	d.udma_mask = via_config->udma_mask;
 
 	vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);

             reply	other threads:[~2009-02-02 19:50 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-02 19:48 Bartlomiej Zolnierkiewicz [this message]
  -- strict thread matches above, loose matches on Subject: below --
2009-06-07 12:44 [git pull] IDE fixes Bartlomiej Zolnierkiewicz
2009-06-07 14:21 ` Alan Cox
2009-06-07 14:32   ` Bartlomiej Zolnierkiewicz
2009-06-07 14:40     ` Alan Cox
2009-06-07 15:03       ` Bartlomiej Zolnierkiewicz
2009-06-07 15:11         ` Alan Cox
2009-06-07 14:38   ` James Bottomley
2009-06-07 14:57     ` Bartlomiej Zolnierkiewicz
2009-06-07 15:18       ` James Bottomley
2009-06-07 15:44         ` Bartlomiej Zolnierkiewicz
2009-06-07 16:08           ` James Bottomley
2009-06-07 17:47             ` Bartlomiej Zolnierkiewicz
2009-06-07 19:08               ` James Bottomley
2009-06-07 19:23                 ` Bartlomiej Zolnierkiewicz
2009-06-07 20:07                 ` Alan Cox
2009-06-07 20:39                   ` James Bottomley
2009-06-07 21:08                     ` Bartlomiej Zolnierkiewicz
2009-06-07 20:42                   ` Bartlomiej Zolnierkiewicz
2009-06-07 16:54           ` Pekka Enberg
2009-06-07 17:55             ` Bartlomiej Zolnierkiewicz
2009-06-07 18:21               ` Pekka Enberg
2009-06-07 19:00                 ` Bartlomiej Zolnierkiewicz
2009-06-07 19:09                   ` Pekka Enberg
2009-06-07 19:25                     ` Bartlomiej Zolnierkiewicz
2009-06-07 23:15                       ` Linus Torvalds
2009-06-07 23:47                         ` Bartlomiej Zolnierkiewicz
2009-06-07 23:57                           ` Linus Torvalds
2009-06-08  0:54                             ` Bartlomiej Zolnierkiewicz
2009-06-07 23:14               ` Linus Torvalds
2009-06-07 23:12       ` Linus Torvalds
2009-05-22 15:17 Bartlomiej Zolnierkiewicz
2009-05-16 19:16 Bartlomiej Zolnierkiewicz
2009-05-16 19:22 ` Borislav Petkov
2009-05-16 19:33   ` Bartlomiej Zolnierkiewicz
2009-04-22 18:48 Bartlomiej Zolnierkiewicz
2009-04-22 19:06 ` Joe Perches
2009-04-22 19:22   ` Sam Ravnborg
2009-04-22 19:43   ` Bartlomiej Zolnierkiewicz
2009-04-22 19:55     ` Joe Perches
2009-04-22 21:41       ` Bartlomiej Zolnierkiewicz
2009-04-22 22:02         ` Ray Lee
2009-04-22 22:51           ` Bartlomiej Zolnierkiewicz
2009-04-22 22:58           ` Bartlomiej Zolnierkiewicz
2009-04-18 16:09 Bartlomiej Zolnierkiewicz
2009-03-13 20:49 Bartlomiej Zolnierkiewicz
2009-03-05 15:30 Bartlomiej Zolnierkiewicz
2009-03-05 16:27 ` Bartlomiej Zolnierkiewicz
2009-02-25 19:54 Bartlomiej Zolnierkiewicz
2009-01-19 12:50 Bartlomiej Zolnierkiewicz
2009-01-19 12:50 ` Bartlomiej Zolnierkiewicz
2008-12-22 22:08 Bartlomiej Zolnierkiewicz
2008-12-22 22:08 ` Bartlomiej Zolnierkiewicz
2008-12-08 16:55 Bartlomiej Zolnierkiewicz
2008-12-08 16:55 ` Bartlomiej Zolnierkiewicz
2008-10-05 16:38 Bartlomiej Zolnierkiewicz
2008-09-27 17:47 Bartlomiej Zolnierkiewicz
2008-09-10 20:47 Bartlomiej Zolnierkiewicz
2008-09-02 18:24 Bartlomiej Zolnierkiewicz
2008-08-18 20:22 Bartlomiej Zolnierkiewicz
2008-07-08 17:38 Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200902022048.10264.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sfr@canb.auug.org.au \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.