From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Stephen Rothwell <sfr@canb.auug.org.au>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git pull] IDE fixes
Date: Sun, 7 Jun 2009 14:44:32 +0200 [thread overview]
Message-ID: <200906071444.33047.bzolnier@gmail.com> (raw)
Hi,
Fixes for pdc202xx_old host driver and for Host Protected Area (HPA) support.
The latter ones come a bit late but since they were tested and reviewed
(fs/partitions/ part was acked by Al, drivers/ide/ parts by Alan and Sergei)
I see no real reason to delay them till 2.6.31, especially since they should
make everyone's life easier (as we have now the same default HPA behavior in
both ide/libata).
Linus, please pull from 'for-linus' branch of:
master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6.git for-linus
to receive the following updates:
Documentation/ide/ide.txt | 2 +
Documentation/kernel-parameters.txt | 7 +--
drivers/ide/ide-disk.c | 71 ++++++++++++++++++++++++++++++-----
drivers/ide/ide-gd.c | 14 +++++++
drivers/ide/ide.c | 10 +++++
drivers/ide/pdc202xx_old.c | 22 +++--------
fs/partitions/check.c | 42 ++++++++++++++++-----
include/linux/blkdev.h | 2 +
include/linux/genhd.h | 1 +
include/linux/ide.h | 6 ++-
10 files changed, 134 insertions(+), 43 deletions(-)
Bartlomiej Zolnierkiewicz (4):
partitions: warn about the partition exceeding device capacity
partitions: add ->set_capacity block device method
ide-gd: implement block device ->set_capacity method (v2)
ide: preserve Host Protected Area by default (v2)
Sergei Shtylyov (2):
pdc202xx_old: fix 'pdc20246_dma_ops'
pdc202xx_old: fix resetproc() method
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt
index 0c78f4b..e77bebf 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -216,6 +216,8 @@ Other kernel parameters for ide_core are:
* "noflush=[interface_number.device_number]" to disable flush requests
+* "nohpa=[interface_number.device_number]" to disable Host Protected Area
+
* "noprobe=[interface_number.device_number]" to skip probing
* "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a19f021..e58c91c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -835,11 +835,8 @@ and is between 256 and 4096 characters. It is defined in the file
ide-core.nodma= [HW] (E)IDE subsystem
Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
- .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom
- .chs .ignore_cable are additional options
- See Documentation/ide/ide.txt.
-
- idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
+ .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
+ .cdrom .chs .ignore_cable are additional options
See Documentation/ide/ide.txt.
ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index a9fbe2c..3d92c9d 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -302,14 +302,12 @@ static const struct drive_list_entry hpa_list[] = {
{ NULL, NULL }
};
-static void idedisk_check_hpa(ide_drive_t *drive)
+static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48)
{
- unsigned long long capacity, set_max;
- int lba48 = ata_id_lba48_enabled(drive->id);
+ u64 capacity, set_max;
capacity = drive->capacity64;
-
- set_max = idedisk_read_native_max_address(drive, lba48);
+ set_max = idedisk_read_native_max_address(drive, lba48);
if (ide_in_drive_list(drive->id, hpa_list)) {
/*
@@ -320,9 +318,31 @@ static void idedisk_check_hpa(ide_drive_t *drive)
set_max--;
}
+ return set_max;
+}
+
+static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48)
+{
+ set_max = idedisk_set_max_address(drive, set_max, lba48);
+ if (set_max)
+ drive->capacity64 = set_max;
+
+ return set_max;
+}
+
+static void idedisk_check_hpa(ide_drive_t *drive)
+{
+ u64 capacity, set_max;
+ int lba48 = ata_id_lba48_enabled(drive->id);
+
+ capacity = drive->capacity64;
+ set_max = ide_disk_hpa_get_native_capacity(drive, lba48);
+
if (set_max <= capacity)
return;
+ drive->probed_capacity = set_max;
+
printk(KERN_INFO "%s: Host Protected Area detected.\n"
"\tcurrent capacity is %llu sectors (%llu MB)\n"
"\tnative capacity is %llu sectors (%llu MB)\n",
@@ -330,13 +350,13 @@ static void idedisk_check_hpa(ide_drive_t *drive)
capacity, sectors_to_MB(capacity),
set_max, sectors_to_MB(set_max));
- set_max = idedisk_set_max_address(drive, set_max, lba48);
+ if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0)
+ return;
- if (set_max) {
- drive->capacity64 = set_max;
+ set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48);
+ if (set_max)
printk(KERN_INFO "%s: Host Protected Area disabled.\n",
drive->name);
- }
}
static int ide_disk_get_capacity(ide_drive_t *drive)
@@ -358,6 +378,8 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
drive->capacity64 = drive->cyl * drive->head * drive->sect;
}
+ drive->probed_capacity = drive->capacity64;
+
if (lba) {
drive->dev_flags |= IDE_DFLAG_LBA;
@@ -376,7 +398,7 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
"%llu sectors (%llu MB)\n",
drive->name, (unsigned long long)drive->capacity64,
sectors_to_MB(drive->capacity64));
- drive->capacity64 = 1ULL << 28;
+ drive->probed_capacity = drive->capacity64 = 1ULL << 28;
}
if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
@@ -392,6 +414,34 @@ static int ide_disk_get_capacity(ide_drive_t *drive)
return 0;
}
+static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity)
+{
+ u64 set = min(capacity, drive->probed_capacity);
+ u16 *id = drive->id;
+ int lba48 = ata_id_lba48_enabled(id);
+
+ if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 ||
+ ata_id_hpa_enabled(id) == 0)
+ goto out;
+
+ /*
+ * according to the spec the SET MAX ADDRESS command shall be
+ * immediately preceded by a READ NATIVE MAX ADDRESS command
+ */
+ capacity = ide_disk_hpa_get_native_capacity(drive, lba48);
+ if (capacity == 0)
+ goto out;
+
+ set = ide_disk_hpa_set_capacity(drive, set, lba48);
+ if (set) {
+ /* needed for ->resume to disable HPA */
+ drive->dev_flags |= IDE_DFLAG_NOHPA;
+ return set;
+ }
+out:
+ return drive->capacity64;
+}
+
static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
{
ide_drive_t *drive = q->queuedata;
@@ -741,6 +791,7 @@ static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
const struct ide_disk_ops ide_ata_disk_ops = {
.check = ide_disk_check,
+ .set_capacity = ide_disk_set_capacity,
.get_capacity = ide_disk_get_capacity,
.setup = ide_disk_setup,
.flush = ide_disk_flush,
diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c
index 4b6b71e..2141190 100644
--- a/drivers/ide/ide-gd.c
+++ b/drivers/ide/ide-gd.c
@@ -287,6 +287,19 @@ static int ide_gd_media_changed(struct gendisk *disk)
return ret;
}
+static unsigned long long ide_gd_set_capacity(struct gendisk *disk,
+ unsigned long long capacity)
+{
+ struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
+ ide_drive_t *drive = idkp->drive;
+ const struct ide_disk_ops *disk_ops = drive->disk_ops;
+
+ if (disk_ops->set_capacity)
+ return disk_ops->set_capacity(drive, capacity);
+
+ return drive->capacity64;
+}
+
static int ide_gd_revalidate_disk(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
@@ -315,6 +328,7 @@ static struct block_device_operations ide_gd_ops = {
.locked_ioctl = ide_gd_ioctl,
.getgeo = ide_gd_getgeo,
.media_changed = ide_gd_media_changed,
+ .set_capacity = ide_gd_set_capacity,
.revalidate_disk = ide_gd_revalidate_disk
};
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 92c9b90..16d0569 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -211,6 +211,11 @@ static unsigned int ide_noflush;
module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0);
MODULE_PARM_DESC(noflush, "disable flush requests for a device");
+static unsigned int ide_nohpa;
+
+module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0);
+MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device");
+
static unsigned int ide_noprobe;
module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0);
@@ -281,6 +286,11 @@ static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
drive->name);
drive->dev_flags |= IDE_DFLAG_NOFLUSH;
}
+ if (ide_nohpa & (1 << i)) {
+ printk(KERN_INFO "ide: disabling Host Protected Area for %s\n",
+ drive->name);
+ drive->dev_flags |= IDE_DFLAG_NOHPA;
+ }
if (ide_noprobe & (1 << i)) {
printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
drive->dev_flags |= IDE_DFLAG_NOPROBE;
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index 248a54b..b3bc96f 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2006-2007 MontaVista Software, Inc.
+ * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* Portions Copyright (C) 1999 Promise Technology, Inc.
@@ -227,28 +227,19 @@ somebody_else:
return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
}
-static void pdc202xx_reset_host (ide_hwif_t *hwif)
+static void pdc202xx_reset(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
unsigned long high_16 = hwif->extra_base - 16;
u8 udma_speed_flag = inb(high_16 | 0x001f);
+ printk(KERN_WARNING "PDC202xx: software reset...\n");
+
outb(udma_speed_flag | 0x10, high_16 | 0x001f);
mdelay(100);
outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
mdelay(2000); /* 2 seconds ?! */
- printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
- hwif->channel ? "Secondary" : "Primary");
-}
-
-static void pdc202xx_reset (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_hwif_t *mate = hwif->mate;
-
- pdc202xx_reset_host(hwif);
- pdc202xx_reset_host(mate);
-
ide_set_max_pio(drive);
}
@@ -328,9 +319,8 @@ static const struct ide_dma_ops pdc20246_dma_ops = {
.dma_start = ide_dma_start,
.dma_end = ide_dma_end,
.dma_test_irq = pdc202xx_dma_test_irq,
- .dma_lost_irq = pdc202xx_dma_lost_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
.dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_clear = pdc202xx_reset,
.dma_sff_read_status = ide_dma_sff_read_status,
};
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 99e33ef..4bc2c43 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -546,27 +546,49 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
/* add partitions */
for (p = 1; p < state->limit; p++) {
- sector_t size = state->parts[p].size;
- sector_t from = state->parts[p].from;
+ sector_t size, from;
+try_scan:
+ size = state->parts[p].size;
if (!size)
continue;
+
+ from = state->parts[p].from;
if (from >= get_capacity(disk)) {
printk(KERN_WARNING
"%s: p%d ignored, start %llu is behind the end of the disk\n",
disk->disk_name, p, (unsigned long long) from);
continue;
}
+
if (from + size > get_capacity(disk)) {
- /*
- * we can not ignore partitions of broken tables
- * created by for example camera firmware, but we
- * limit them to the end of the disk to avoid
- * creating invalid block devices
- */
+ struct block_device_operations *bdops = disk->fops;
+ unsigned long long capacity;
+
printk(KERN_WARNING
- "%s: p%d size %llu limited to end of disk\n",
+ "%s: p%d size %llu exceeds device capacity, ",
disk->disk_name, p, (unsigned long long) size);
- size = get_capacity(disk) - from;
+
+ if (bdops->set_capacity &&
+ (disk->flags & GENHD_FL_NATIVE_CAPACITY) == 0) {
+ printk(KERN_CONT "enabling native capacity\n");
+ capacity = bdops->set_capacity(disk, ~0ULL);
+ disk->flags |= GENHD_FL_NATIVE_CAPACITY;
+ if (capacity > get_capacity(disk)) {
+ set_capacity(disk, capacity);
+ check_disk_size_change(disk, bdev);
+ bdev->bd_invalidated = 0;
+ }
+ goto try_scan;
+ } else {
+ /*
+ * we can not ignore partitions of broken tables
+ * created by for example camera firmware, but
+ * we limit them to the end of the disk to avoid
+ * creating invalid block devices
+ */
+ printk(KERN_CONT "limited to end of disk\n");
+ size = get_capacity(disk) - from;
+ }
}
part = add_partition(disk, p, from, size,
state->parts[p].flags);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 6f841fb..a2d7298 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1106,6 +1106,8 @@ struct block_device_operations {
int (*direct_access) (struct block_device *, sector_t,
void **, unsigned long *);
int (*media_changed) (struct gendisk *);
+ unsigned long long (*set_capacity) (struct gendisk *,
+ unsigned long long);
int (*revalidate_disk) (struct gendisk *);
int (*getgeo)(struct block_device *, struct hd_geometry *);
struct module *owner;
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 634c530..239e24b 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -113,6 +113,7 @@ struct hd_struct {
#define GENHD_FL_UP 16
#define GENHD_FL_SUPPRESS_PARTITION_INFO 32
#define GENHD_FL_EXT_DEVT 64 /* allow extended devt */
+#define GENHD_FL_NATIVE_CAPACITY 128
#define BLK_SCSI_MAX_CMDS (256)
#define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 9fed365..45dce3b 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -397,6 +397,7 @@ struct ide_drive_s;
struct ide_disk_ops {
int (*check)(struct ide_drive_s *, const char *);
int (*get_capacity)(struct ide_drive_s *);
+ u64 (*set_capacity)(struct ide_drive_s *, u64);
void (*setup)(struct ide_drive_s *);
void (*flush)(struct ide_drive_s *);
int (*init_media)(struct ide_drive_s *, struct gendisk *);
@@ -474,6 +475,8 @@ enum {
IDE_DFLAG_NICE1 = (1 << 5),
/* device is physically present */
IDE_DFLAG_PRESENT = (1 << 6),
+ /* disable Host Protected Area */
+ IDE_DFLAG_NOHPA = (1 << 7),
/* id read from device (synthetic if not set) */
IDE_DFLAG_ID_READ = (1 << 8),
IDE_DFLAG_NOPROBE = (1 << 9),
@@ -568,8 +571,7 @@ struct ide_drive_s {
unsigned int drive_data; /* used by set_pio_mode/dev_select() */
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
- u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
-
+ u64 probed_capacity;/* initial/native media capacity */
u64 capacity64; /* total number of sectors */
int lun; /* logical unit */
next reply other threads:[~2009-06-07 13:44 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-07 12:44 Bartlomiej Zolnierkiewicz [this message]
2009-06-07 14:21 ` [git pull] IDE fixes Alan Cox
2009-06-07 14:32 ` Bartlomiej Zolnierkiewicz
2009-06-07 14:40 ` Alan Cox
2009-06-07 15:03 ` Bartlomiej Zolnierkiewicz
2009-06-07 15:11 ` Alan Cox
2009-06-07 14:38 ` James Bottomley
2009-06-07 14:57 ` Bartlomiej Zolnierkiewicz
2009-06-07 15:18 ` James Bottomley
2009-06-07 15:44 ` Bartlomiej Zolnierkiewicz
2009-06-07 16:08 ` James Bottomley
2009-06-07 17:47 ` Bartlomiej Zolnierkiewicz
2009-06-07 19:08 ` James Bottomley
2009-06-07 19:23 ` Bartlomiej Zolnierkiewicz
2009-06-07 20:07 ` Alan Cox
2009-06-07 20:39 ` James Bottomley
2009-06-07 21:08 ` Bartlomiej Zolnierkiewicz
2009-06-07 20:42 ` Bartlomiej Zolnierkiewicz
2009-06-07 16:54 ` Pekka Enberg
2009-06-07 17:55 ` Bartlomiej Zolnierkiewicz
2009-06-07 18:21 ` Pekka Enberg
2009-06-07 19:00 ` Bartlomiej Zolnierkiewicz
2009-06-07 19:09 ` Pekka Enberg
2009-06-07 19:25 ` Bartlomiej Zolnierkiewicz
2009-06-07 23:15 ` Linus Torvalds
2009-06-07 23:47 ` Bartlomiej Zolnierkiewicz
2009-06-07 23:57 ` Linus Torvalds
2009-06-08 0:54 ` Bartlomiej Zolnierkiewicz
2009-06-07 23:14 ` Linus Torvalds
2009-06-07 23:12 ` Linus Torvalds
-- strict thread matches above, loose matches on Subject: below --
2009-05-22 15:17 Bartlomiej Zolnierkiewicz
2009-05-16 19:16 Bartlomiej Zolnierkiewicz
2009-05-16 19:22 ` Borislav Petkov
2009-05-16 19:33 ` Bartlomiej Zolnierkiewicz
2009-04-22 18:48 Bartlomiej Zolnierkiewicz
2009-04-22 19:06 ` Joe Perches
2009-04-22 19:22 ` Sam Ravnborg
2009-04-22 19:43 ` Bartlomiej Zolnierkiewicz
2009-04-22 19:55 ` Joe Perches
2009-04-22 21:41 ` Bartlomiej Zolnierkiewicz
2009-04-22 22:02 ` Ray Lee
2009-04-22 22:51 ` Bartlomiej Zolnierkiewicz
2009-04-22 22:58 ` Bartlomiej Zolnierkiewicz
2009-04-18 16:09 Bartlomiej Zolnierkiewicz
2009-03-13 20:49 Bartlomiej Zolnierkiewicz
2009-03-05 15:30 Bartlomiej Zolnierkiewicz
2009-03-05 16:27 ` Bartlomiej Zolnierkiewicz
2009-02-25 19:54 Bartlomiej Zolnierkiewicz
2009-02-02 19:48 Bartlomiej Zolnierkiewicz
2009-01-19 12:50 Bartlomiej Zolnierkiewicz
2009-01-19 12:50 ` Bartlomiej Zolnierkiewicz
2008-12-22 22:08 Bartlomiej Zolnierkiewicz
2008-12-22 22:08 ` Bartlomiej Zolnierkiewicz
2008-12-08 16:55 Bartlomiej Zolnierkiewicz
2008-12-08 16:55 ` Bartlomiej Zolnierkiewicz
2008-10-05 16:38 Bartlomiej Zolnierkiewicz
2008-09-27 17:47 Bartlomiej Zolnierkiewicz
2008-09-10 20:47 Bartlomiej Zolnierkiewicz
2008-09-02 18:24 Bartlomiej Zolnierkiewicz
2008-08-18 20:22 Bartlomiej Zolnierkiewicz
2008-07-08 17:38 Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200906071444.33047.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.