Re: [PATCH] Mantis Bug (was Technisat HD2 cannot szap/scan)

["Hans Werner" <HWerner4@gmx.de>]

> Hi,
> 
> checked it again. Your lnbp21 patch definitely kills S2 tuning
> on the Terratec Cinergy S2 PCI HD.
> 
> mfg
> 
> Edgar ( gimli ) Hucek


I looked at it again and here is a new patch to set the LNBP21 
options for the Twinhan VP-1041. This works better for me, including
DVB-S2 channels. The EN enable bit is now not permanently set so
sleep behavior is correct.

Please note that I have a DiSEqC 1.2 rotor between the VP-1041 card
and the LNB. That is quite a normal configuration, but the driver was
probably not properly tested with rotors (and switches?) before.

To rotate with scan-s2 use the patch I posted, which will be applied
there soon:
http://linuxtv.org/pipermail/linux-dvb/2009-January/031660.html

Regards,
Hans

Patch is against latest http://mercurial.intuxication.org/hg/s2-liplianin  repo.

Signed-off-by: Hans Werner <hwerner4@gmx.de>
 
diff -r 084878324629 linux/drivers/media/dvb/mantis/mantis_dvb.c
--- a/linux/drivers/media/dvb/mantis/mantis_dvb.c
+++ b/linux/drivers/media/dvb/mantis/mantis_dvb.c
@@ -239,7 +239,8 @@ int __devinit mantis_frontend_init(struc
 			vp1041_config.demod_address);
 
 			if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, &mantis->adapter)) {
-				if (!lnbp21_attach(mantis->fe, &mantis->adapter, 0, 0)) {
+				// static current limit, no extra 1V, high current limit, tone from DSQIN pin (stb0899)
+				if (!lnbp21_attach(mantis->fe, &mantis->adapter, LNBP21_PCL , LNBP21_LLC | LNBP21_ISEL | LNBP21_TEN)) {
 					printk("%s: No LNBP21 found!\n", __FUNCTION__);
 					mantis->fe = NULL;
 				}

-- 
Release early, release often.

Jetzt 1 Monat kostenlos! GMX FreeDSL - Telefonanschluss + DSL 
für nur 17,95 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a