Re: [linux-dvb] Technisat HD2 cannot szap/scan

[Pavel Hofman <pavel.hofman@insite.cz>]

Alex Betis napsal(a):
> On Wed, Dec 3, 2008 at 9:32 AM, Alex Betis <alex.betis@gmail.com 
> <mailto:alex.betis@gmail.com>> wrote:
> 
> 
>     On Wed, Dec 3, 2008 at 12:31 AM, Pavel Hofman
>     <pavel.hofman@insite.cz <mailto:pavel.hofman@insite.cz>> wrote:
> 
>         pavel@htpc:~/project/satelit2/szap-s2$
>         <mailto:pavel@htpc:~/project/satelit2/szap-s2$> ./szap-s2 -x
>         EinsFestival
>         reading channels from file '/home/pavel/.szap/channels.conf'
>         zapping to 5 'EinsFestival':
>         delivery DVB-S, modulation QPSK
>         sat 0, frequency 12110 MHz H, symbolrate 27500000, coderate auto,
> 
>     I don't think there is 12110 channel on Astra 19.2, at least not
>     accirding to lyngsat.
> 
> My bad, there is such channel... I somehow got to Astra 1G only page 
> instead of all Atras in that position.
> Try other frequencies anyway.
>  
> Maybe you have diseqc problems?
> 

Alex,

Thanks a lot for your help. I tested the card on a different computer 
with Windows and I could scan and view both Astra 19.2E and Astra 23.5E 
free-to-air programs through A and B parts of the dual LNB. I have no 
decoding card yet, nor any adapter.

Since the computer was different, I will test my final computer/setup in 
windows (just have to install them first here :) ). Nevertheless I think 
it will work in windows.

I will get back with result.

Regards,

Pavel.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb