Re: [linux-dvb] Technisat HD2 cannot szap/scan

[Pavel Hofman <pavel.hofman@insite.cz>]

[-- Attachment #1: Type: text/plain, Size: 3615 bytes --]

Alex Betis napsal(a):
> On Sun, Dec 7, 2008 at 5:06 PM, Pavel Hofman <pavel.hofman@insite.cz 
> <mailto:pavel.hofman@insite.cz>> wrote:
> 
>     Hi,
> 
>     Partial success :)
> 
>     I added a few free-to-air channels I was able to tune in WinXP to
>     channels.conf:
> 
>     Entertainment:12012:v:0:27500:2582:2581:8037
>     SkyNews:12207:v:0:27500:514:645:4707
>     WineTV:11555:h:1:27500:2372:2374:50435
>     AvaTest:11555:h:1:27500:2329:2330:50446
>     Vegas:11515:h:1:27500:3568:3567:8035
>     Faith:11515:h:1:27500:2375:2376:50455
> 
> 
>     The first two on LNB0, the rest on LNB1.
> 
>     For LNB0, I can tune via szap2:
> 
>     pavel@htpc:~/project/satelit2/szap-s2$ ./szap-s2 -r SkyNews
>     reading channels from file '/home/pavel/.szap/channels.conf'
>     zapping to 2 'SkyNews':
>     delivery DVB-S, modulation QPSK
>     sat 0, frequency 12207 MHz V, symbolrate 27500000, coderate auto,
>     rolloff 0.35
>     vpid 0x0202, apid 0x0285, sid 0x1263
>     using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>     status 1f | signal 0136 | snr 002d | ber 00000000 | unc fffffffe |
>     FE_HAS_LOCK
>     status 1f | signal 0136 | snr 0031 | ber 00000000 | unc fffffffe |
>     FE_HAS_LOCK
> 
>     and view the channels with
> 
>     mplayer - < /dev/dvb/adapter0/dvr0
> 
>     For LNB1, it seems I can get signal via szap2:
> 
>     pavel@htpc:~/project/satelit2/szap-s2$ ./szap-s2 -r Faith
>     reading channels from file '/home/pavel/.szap/channels.conf'
>     zapping to 6 'Faith':
>     delivery DVB-S, modulation QPSK
>     sat 1, frequency 11515 MHz H, symbolrate 27500000, coderate auto,
>     rolloff 0.35
>     vpid 0x0947, apid 0x0948, sid 0xc517
>     using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>     status 1f | signal 0178 | snr 0051 | ber 00000000 | unc fffffffe |
>     FE_HAS_LOCK
>     status 1f | signal 0178 | snr 0051 | ber 00000000 | unc fffffffe |
>     FE_HAS_LOCK
>     status 1f | signal 0178 | snr 0050 | ber 00000000 | unc fffffffe |
>     FE_HAS_LOCK
> 
> 
>     However, /dev/dvb/adapter0/dvr0 outputs no data for any of the
>     stations on the second LNB1.
> 
> As I said, check your diseqc configuration, the problem might be there.
> There are some cards that do not allow AUTO settings for FEC, modulation 
> and rolloff, maybe you have one of those cards.
> 
> 
> 
> 
>     Perhaps it is correct and the channels I checked broadcast no stream
>     at this time. Since scan2 keeps failing, please is there a place to
>     download recent channels.conf for Astra 19.2E so that I can test on
>     many more channels?
> 
> Check in dvb-s/Ku-Band directory.
> 

Alex,

Thanks a lot for your patience. I am slowly starting to understand the 
whole thing.

  ./scan-s2 -5 -o zap -x 0 -s 0   dvb-s/Ku-band/S19.2E.ini > channels.conf

Works fine, finds many fta channels.

  ./scan-s2 -5 -o zap -x 0 -s 1   dvb-s/Ku-band/S23.5E.ini >> channels.conf

Even the second LNB works now, finds some ftas :)

Results of the scan give very often zero APID, VPID:

Sky Cust Ch:11934:v:0:27500:0:0:4505:5
Cartoon Network Game 4:12012:v:0:27500:0:2603:8005:5
Video Application Val:12012:v:0:27500:2518:2519:8015:5
Sky Bingo:12012:v:0:27500:0:0:8032:5
Sky Bet, Vegas & Sky Poker:12012:v:0:27500:0:0:8076:5

Please see the attached screenshot for results of the scanner under 
windows - APID/VPID are almost never zero. Do the missing values have 
any negative effects?

If I want to use e.g. kaffeine, should I just rename and install the new 
szap-s2/sca-s2 binaries systemwide?

Thanks a lot for your great help.

Pavel.




[-- Attachment #2: lnb0.png --]
[-- Type: image/png, Size: 44010 bytes --]

[-- Attachment #3: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb