From: "Henrik Rydberg" <rydberg@euromail.se>
To: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Jean Delvare" <khali@linux-fr.org>,
"Mikael Ström" <mikael@sesamiq.com>,
"Julien BLACHE" <jb@jblache.org>,
"Guenter Roeck" <guenter.roeck@ericsson.com>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than
Date: Mon, 20 Dec 2010 15:06:48 +0000 [thread overview]
Message-ID: <20101220150648.GA19922@polaris.bitmath.org> (raw)
In-Reply-To: <20101220142815.GA23998@srcf.ucam.org>
On Mon, Dec 20, 2010 at 02:28:15PM +0000, Matthew Garrett wrote:
> On Mon, Dec 20, 2010 at 03:23:44PM +0100, Henrik Rydberg wrote:
>
> > The macbook overheat problems goes way back. All models have automatic
> > heat protection, but it kicks in at temperatures uncomfortable to most
> > users. The severity also depends on when the model was made. The
> > current solution is to use the macfanctld driver, which disables
> > automatic fan control, replacing it with a control loop yielding more
> > workable temperatures. A fan control solution in the kernel would
> > certainly be well received.
>
> There is one, you just need to hook into the thermal device interface.
Right. The fans and the right sensors need to be plugged in, which
seems like it should happen at the same time the platform device is
removed. Thanks to macfanctld, there might even be enough information
regarding what sensors to use. Just about.
Henrik
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: "Henrik Rydberg" <rydberg@euromail.se>
To: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: "Jean Delvare" <khali@linux-fr.org>,
"Mikael Ström" <mikael@sesamiq.com>,
"Julien BLACHE" <jb@jblache.org>,
"Guenter Roeck" <guenter.roeck@ericsson.com>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices
Date: Mon, 20 Dec 2010 16:06:48 +0100 [thread overview]
Message-ID: <20101220150648.GA19922@polaris.bitmath.org> (raw)
In-Reply-To: <20101220142815.GA23998@srcf.ucam.org>
On Mon, Dec 20, 2010 at 02:28:15PM +0000, Matthew Garrett wrote:
> On Mon, Dec 20, 2010 at 03:23:44PM +0100, Henrik Rydberg wrote:
>
> > The macbook overheat problems goes way back. All models have automatic
> > heat protection, but it kicks in at temperatures uncomfortable to most
> > users. The severity also depends on when the model was made. The
> > current solution is to use the macfanctld driver, which disables
> > automatic fan control, replacing it with a control loop yielding more
> > workable temperatures. A fan control solution in the kernel would
> > certainly be well received.
>
> There is one, you just need to hook into the thermal device interface.
Right. The fans and the right sensors need to be plugged in, which
seems like it should happen at the same time the platform device is
removed. Thanks to macfanctld, there might even be enough information
regarding what sensors to use. Just about.
Henrik
next prev parent reply other threads:[~2010-12-20 15:06 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-16 15:33 [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than hardcoding Matthew Garrett
2010-12-16 15:33 ` [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-16 15:33 ` [lm-sensors] [PATCH 2/2] applesmc: Perform some more sanity Matthew Garrett
2010-12-16 15:33 ` [PATCH 2/2] applesmc: Perform some more sanity checking on temperatures Matthew Garrett
2010-12-16 16:48 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than Henrik Rydberg
2010-12-16 16:48 ` [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-16 17:00 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than Matthew Garrett
2010-12-16 17:00 ` [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-16 17:00 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than Guenter Roeck
2010-12-16 17:00 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Guenter Roeck
2010-12-17 21:57 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather Matthew Garrett
2010-12-17 21:57 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-17 21:58 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than hardcoding Matthew Garrett
2010-12-17 21:58 ` [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-17 22:16 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than Guenter Roeck
2010-12-17 22:16 ` [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Guenter Roeck
2010-12-17 22:22 ` [lm-sensors] [PATCH 1/2] applesmc: Use PnP rather than Matthew Garrett
2010-12-17 22:22 ` [PATCH 1/2] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-17 22:24 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Matthew Garrett
2010-12-17 22:24 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-18 4:23 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Guenter Roeck
2010-12-18 4:23 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Guenter Roeck
2010-12-18 9:07 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Henrik Rydberg
2010-12-18 9:07 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-18 14:40 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Matthew Garrett
2010-12-18 14:40 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-18 15:31 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Henrik Rydberg
2010-12-18 15:31 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-18 9:37 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Henrik Rydberg
2010-12-18 9:37 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-18 10:09 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Jean Delvare
2010-12-18 10:09 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Jean Delvare
2010-12-18 10:31 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Henrik Rydberg
2010-12-18 10:31 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-18 11:29 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Julien BLACHE
2010-12-18 11:29 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Julien BLACHE
2010-12-18 11:57 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Henrik Rydberg
2010-12-18 11:57 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-20 13:44 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Mikael Ström
2010-12-20 13:44 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Mikael Ström
2010-12-20 13:57 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Jean Delvare
2010-12-20 13:57 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Jean Delvare
2010-12-20 14:23 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Henrik Rydberg
2010-12-20 14:23 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-20 14:28 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather Matthew Garrett
2010-12-20 14:28 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-20 15:06 ` Henrik Rydberg [this message]
2010-12-20 15:06 ` Henrik Rydberg
2010-12-20 15:12 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather Matthew Garrett
2010-12-20 15:12 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-20 15:37 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Henrik Rydberg
2010-12-20 15:37 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-20 14:00 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather Matthew Garrett
2010-12-20 14:00 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-21 6:04 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Mikael Ström
2010-12-21 6:04 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Mikael Ström
2010-12-21 11:09 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Julien BLACHE
2010-12-21 11:09 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Julien BLACHE
2010-12-18 14:43 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Matthew Garrett
2010-12-18 14:43 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-18 15:30 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Henrik Rydberg
2010-12-18 15:30 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Henrik Rydberg
2010-12-18 15:39 ` [lm-sensors] [PATCH 1/2 V3] applesmc: Use PnP rather than Matthew Garrett
2010-12-18 15:39 ` [PATCH 1/2 V3] applesmc: Use PnP rather than hardcoding resources and devices Matthew Garrett
2010-12-17 22:24 ` [lm-sensors] [PATCH 2/2 V3] applesmc: Perform some more sanity Matthew Garrett
2010-12-17 22:24 ` [PATCH 2/2 V3] applesmc: Perform some more sanity checking on temperatures Matthew Garrett
2010-12-17 21:58 ` [lm-sensors] [PATCH 2/2] applesmc: Perform some more sanity Matthew Garrett
2010-12-17 21:58 ` [PATCH 2/2] applesmc: Perform some more sanity checking on temperatures Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101220150648.GA19922@polaris.bitmath.org \
--to=rydberg@euromail.se \
--cc=guenter.roeck@ericsson.com \
--cc=jb@jblache.org \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mikael@sesamiq.com \
--cc=mjg59@srcf.ucam.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.