From: Pavel Machek <pavel@ucw.cz>
To: Tony Lindgren <tony@atomide.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
Mark Rutland <mark.rutland@arm.com>,
Marcel Partap <mpartap@gmx.net>,
Michael Scott <michael.scott@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Subject: Re: [PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
Date: Thu, 22 Mar 2018 14:55:53 +0100 [thread overview]
Message-ID: <20180322135553.GA27648@amd> (raw)
In-Reply-To: <20180309023750.108942-1-tony@atomide.com>
[-- Attachment #1: Type: text/plain, Size: 1544 bytes --]
Hi!
> idle lcd off phy-mapphone-mdm6600 ohci-platform
> 153mW 284mW 344mW
>
> So it seems that MDM6600 is currently not yet idling even with it's
> radio turned off, but that's something that is beyond the control of
> this USB PHY driver. This patch does get us to the point where modem
> data and GPS are usable with libqmi and ModemManager for example.
> Voice calls need more audio driver work.
Ok, let me try. I believe I should see the modem device on lsusb, but
I don't.
user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
sudo lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
zcat /proc/config.gz | grep MAPPH
CONFIG_PHY_MAPPHONE_MDM6600=y
user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
zcat /proc/config.gz | grep OHCI_
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_OMAP3=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
As far as I can tell,
+CONFIG_USB_WDM=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_QUALCOMM=y
+CONFIG_USB_SERIAL_WWAN=y
should be enabled to enable the drivers (and I did that), but without
device showing on the bus...
Any ideas?
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Pavel Machek <pavel@ucw.cz>
To: Tony Lindgren <tony@atomide.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
Mark Rutland <mark.rutland@arm.com>,
Marcel Partap <mpartap@gmx.net>,
Michael Scott <michael.scott@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Subject: [PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
Date: Thu, 22 Mar 2018 14:55:53 +0100 [thread overview]
Message-ID: <20180322135553.GA27648@amd> (raw)
Hi!
> idle lcd off phy-mapphone-mdm6600 ohci-platform
> 153mW 284mW 344mW
>
> So it seems that MDM6600 is currently not yet idling even with it's
> radio turned off, but that's something that is beyond the control of
> this USB PHY driver. This patch does get us to the point where modem
> data and GPS are usable with libqmi and ModemManager for example.
> Voice calls need more audio driver work.
Ok, let me try. I believe I should see the modem device on lsusb, but
I don't.
user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
sudo lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
zcat /proc/config.gz | grep MAPPH
CONFIG_PHY_MAPPHONE_MDM6600=y
user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
zcat /proc/config.gz | grep OHCI_
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_OMAP3=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
As far as I can tell,
+CONFIG_USB_WDM=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_QUALCOMM=y
+CONFIG_USB_SERIAL_WWAN=y
should be enabled to enable the drivers (and I did that), but without
device showing on the bus...
Any ideas?
Best regards,
Pavel
next prev parent reply other threads:[~2018-03-22 13:55 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-09 2:37 [PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4 Tony Lindgren
2018-03-09 2:37 ` Tony Lindgren
2018-03-09 9:44 ` Pavel Machek
2018-03-09 9:44 ` Pavel Machek
2018-03-09 14:52 ` Tony Lindgren
2018-03-09 14:52 ` Tony Lindgren
2018-03-22 13:55 ` Pavel Machek [this message]
2018-03-22 13:55 ` Pavel Machek
2018-03-22 16:46 ` Tony Lindgren
2018-03-22 16:46 ` Tony Lindgren
2018-03-22 19:28 ` Pavel Machek
2018-03-22 19:28 ` Pavel Machek
2018-03-22 22:23 ` Dan Williams
2018-03-22 22:23 ` Dan Williams
2018-03-23 10:54 ` Pavel Machek
2018-03-23 10:54 ` Pavel Machek
2018-03-23 11:35 ` Sebastian Reichel
2018-03-23 11:35 ` Sebastian Reichel
2018-03-23 20:13 ` Pavel Machek
2018-03-23 20:13 ` Pavel Machek
2018-03-24 13:59 ` Dan Williams
2018-03-24 13:59 ` Dan Williams
2018-03-24 14:25 ` Tony Lindgren
2018-03-24 14:25 ` Tony Lindgren
2018-03-24 20:02 ` Pavel Machek
2018-03-24 20:02 ` Pavel Machek
2018-03-25 15:45 ` Tony Lindgren
2018-03-25 15:45 ` Tony Lindgren
2018-03-25 18:58 ` Pavel Machek
2018-03-25 18:58 ` Pavel Machek
2018-03-25 20:52 ` Tony Lindgren
2018-03-25 20:52 ` Tony Lindgren
2018-03-25 22:55 ` Pavel Machek
2018-03-25 22:55 ` Pavel Machek
2018-03-26 0:22 ` Tony Lindgren
2018-03-26 0:22 ` Tony Lindgren
2018-03-26 0:30 ` Tony Lindgren
2018-03-26 0:30 ` Tony Lindgren
2018-03-26 15:16 ` Dan Williams
2018-03-26 15:16 ` Dan Williams
2018-03-27 0:45 ` Tony Lindgren
2018-03-27 0:45 ` Tony Lindgren
2018-03-29 19:44 ` Pavel Machek
2018-03-29 19:44 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180322135553.GA27648@amd \
--to=pavel@ucw.cz \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael.scott@linaro.org \
--cc=mpartap@gmx.net \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.