Re: [PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4

[Tony Lindgren <tony@atomide.com>]

* Dan Williams <dcbw@redhat.com> [180324 14:00]:
> On Fri, 2018-03-23 at 21:13 +0100, Pavel Machek wrote:
> > Does ofonod work for you? I could not get that one to work...
> 
> Because it's looking for a Gobi modem but the MDM6600 isn't one and
> doesn't expose that layout (and doesn't really need to anyway).  I
> don't think ofono has a generic QMI driver, so you'd either need to for
> ce it to use the telitqmi or quectelqmi drivers, or write your own
> generic QMI one.

We also get five USB uarts if we add the device id with something
like the patch below. I don't quite get why we get five UARTS?

Also not sure if we should be using drivers/usb/serial/qcaux.c
instead of qcserial.c?

And from what I recall trying it out, adding the USB UARTs
somehow confused ModemManager I think, that needs to be retested
though :)

And the USB UARTs added do not offer the same set of AT commands
as the n_gsm serial mux.

Regards,

Tony

8< ------------------
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -181,6 +181,9 @@ static const struct usb_device_id id_table[] = {
 	/* Huawei devices */
 	{DEVICE_HWI(0x03f0, 0x581d)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
 
+	/* Motorola devices */
+	{DEVICE_HWI(0x22b8, 0x2a70)},	/* Droid 4 mdm6600 */
+
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
-- 
2.16.2