Re: [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc

[Tony Lindgren <tony@atomide.com>]

* Keerthy <j-keerthy@ti.com> [180925 05:18]:
> I tried Branch [1] above. AM335x-boneblack is doing all good with ds0.
> AM437x-gp the following is happening:
> 
> https://pastebin.ubuntu.com/p/fmZNYgJ9Sp/
> 
> There seems to be a timeout due to which resume is not immediate i see
> 1-2s delay and i see i2c timeout.
> 
> [  402.247271] omap_i2c 4802a000.i2c: controller timed out
> [  402.247441] pixcir_ts 1-005c: pixcir_int_enable: can't read reg 0x34
> : -110
> [  402.247486] pixcir_ts 1-005c: Failed to disable interrupt generation:
> -110
> [  402.247522] pixcir_ts 1-005c: Failed to stop
> [  402.247607] dpm_run_callback(): pixcir_i2c_ts_resume+0x0/0x98
> [pixcir_i2c_ts] returns -110
> 
> so pixcir_i2c_ts_resume is retuning -110 which is timeout error code.
> 
> I did some touch screen testing after DS0 resume seems to be working.
> Everything is in pastebin link provided above.

Thanks for testing. Hmm no idea what might be going on with
the pixcir. I have edt-ft5x06 on the am437x-sk-evm and that
behaves just fine for suspend and resume. Both are on i2c1,
pixcir calls pixcir_start/stop from suspend and resume while
edt-ft5x06 does not reconfigure anything.

I'll try read some edt-ft5x06 register values on suspend
and resume, let's see if that makes it reproducable here.

Regards,

Tony