All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aaron Lindsay <aclindsa@gmail.com>
To: qemu-arm@nongnu.org, Peter Maydell <peter.maydell@linaro.org>,
	Alistair Francis <alistair.francis@xilinx.com>,
	Wei Huang <wei@redhat.com>,
	Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Aaron Lindsay <aclindsa@gmail.com>,
	Michael Spradling <mspradli@codeaurora.org>,
	qemu-devel@nongnu.org, Digant Desai <digantd@codeaurora.org>
Subject: [Qemu-arm] [PATCH v6 04/14] target/arm: Swap PMU values before/after migrations
Date: Wed, 10 Oct 2018 16:37:25 -0400	[thread overview]
Message-ID: <20181010203735.27918-5-aclindsa@gmail.com> (raw)
In-Reply-To: <20181010203735.27918-1-aclindsa@gmail.com>

Because of the PMU's design, many register accesses have side effects
which are inter-related, meaning that the normal method of saving CP
registers can result in inconsistent state. These side-effects are
largely handled in *op_start and *op_finish functions which can be
called globally once before and after the state is saved/restored. By
doing this and adding raw read/write functions for the affected
registers, we avoid such inconsistencies.

Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
---
 target/arm/helper.c  |  6 ++++--
 target/arm/machine.c | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index 8ca4d30797..12c53e54e9 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1379,11 +1379,13 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0,
       .access = PL0_RW, .accessfn = pmreg_access_ccntr,
       .type = ARM_CP_IO,
-      .readfn = pmccntr_read, .writefn = pmccntr_write, },
+      .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt),
+      .readfn = pmccntr_read, .writefn = pmccntr_write,
+      .raw_readfn = raw_read, .raw_writefn = raw_write, },
 #endif
     { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7,
-      .writefn = pmccfiltr_write,
+      .writefn = pmccfiltr_write, .raw_writefn = raw_write,
       .access = PL0_RW, .accessfn = pmreg_access,
       .type = ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
diff --git a/target/arm/machine.c b/target/arm/machine.c
index ff4ec22bf7..8139b25be5 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -584,6 +584,8 @@ static int cpu_pre_save(void *opaque)
 {
     ARMCPU *cpu = opaque;
 
+    pmccntr_sync(&cpu->env);
+
     if (kvm_enabled()) {
         if (!write_kvmstate_to_list(cpu)) {
             /* This should never fail */
@@ -605,6 +607,19 @@ static int cpu_pre_save(void *opaque)
     return 0;
 }
 
+static void cpu_post_save(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmccntr_sync(&cpu->env);
+}
+
+static int cpu_pre_load(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmccntr_sync(&cpu->env);
+    return 0;
+}
+
 static int cpu_post_load(void *opaque, int version_id)
 {
     ARMCPU *cpu = opaque;
@@ -652,6 +667,8 @@ static int cpu_post_load(void *opaque, int version_id)
     hw_breakpoint_update_all(cpu);
     hw_watchpoint_update_all(cpu);
 
+    pmccntr_sync(&cpu->env);
+
     return 0;
 }
 
@@ -660,6 +677,8 @@ const VMStateDescription vmstate_arm_cpu = {
     .version_id = 22,
     .minimum_version_id = 22,
     .pre_save = cpu_pre_save,
+    .post_save = cpu_post_save,
+    .pre_load = cpu_pre_load,
     .post_load = cpu_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(env.regs, ARMCPU, 16),
-- 
2.19.1


WARNING: multiple messages have this Message-ID (diff)
From: Aaron Lindsay <aclindsa@gmail.com>
To: qemu-arm@nongnu.org, Peter Maydell <peter.maydell@linaro.org>,
	Alistair Francis <alistair.francis@xilinx.com>,
	Wei Huang <wei@redhat.com>,
	Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: qemu-devel@nongnu.org,
	Michael Spradling <mspradli@codeaurora.org>,
	Digant Desai <digantd@codeaurora.org>,
	Aaron Lindsay <aclindsa@gmail.com>
Subject: [Qemu-devel] [PATCH v6 04/14] target/arm: Swap PMU values before/after migrations
Date: Wed, 10 Oct 2018 16:37:25 -0400	[thread overview]
Message-ID: <20181010203735.27918-5-aclindsa@gmail.com> (raw)
In-Reply-To: <20181010203735.27918-1-aclindsa@gmail.com>

Because of the PMU's design, many register accesses have side effects
which are inter-related, meaning that the normal method of saving CP
registers can result in inconsistent state. These side-effects are
largely handled in *op_start and *op_finish functions which can be
called globally once before and after the state is saved/restored. By
doing this and adding raw read/write functions for the affected
registers, we avoid such inconsistencies.

Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
---
 target/arm/helper.c  |  6 ++++--
 target/arm/machine.c | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index 8ca4d30797..12c53e54e9 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -1379,11 +1379,13 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0,
       .access = PL0_RW, .accessfn = pmreg_access_ccntr,
       .type = ARM_CP_IO,
-      .readfn = pmccntr_read, .writefn = pmccntr_write, },
+      .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt),
+      .readfn = pmccntr_read, .writefn = pmccntr_write,
+      .raw_readfn = raw_read, .raw_writefn = raw_write, },
 #endif
     { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7,
-      .writefn = pmccfiltr_write,
+      .writefn = pmccfiltr_write, .raw_writefn = raw_write,
       .access = PL0_RW, .accessfn = pmreg_access,
       .type = ARM_CP_IO,
       .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0),
diff --git a/target/arm/machine.c b/target/arm/machine.c
index ff4ec22bf7..8139b25be5 100644
--- a/target/arm/machine.c
+++ b/target/arm/machine.c
@@ -584,6 +584,8 @@ static int cpu_pre_save(void *opaque)
 {
     ARMCPU *cpu = opaque;
 
+    pmccntr_sync(&cpu->env);
+
     if (kvm_enabled()) {
         if (!write_kvmstate_to_list(cpu)) {
             /* This should never fail */
@@ -605,6 +607,19 @@ static int cpu_pre_save(void *opaque)
     return 0;
 }
 
+static void cpu_post_save(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmccntr_sync(&cpu->env);
+}
+
+static int cpu_pre_load(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+    pmccntr_sync(&cpu->env);
+    return 0;
+}
+
 static int cpu_post_load(void *opaque, int version_id)
 {
     ARMCPU *cpu = opaque;
@@ -652,6 +667,8 @@ static int cpu_post_load(void *opaque, int version_id)
     hw_breakpoint_update_all(cpu);
     hw_watchpoint_update_all(cpu);
 
+    pmccntr_sync(&cpu->env);
+
     return 0;
 }
 
@@ -660,6 +677,8 @@ const VMStateDescription vmstate_arm_cpu = {
     .version_id = 22,
     .minimum_version_id = 22,
     .pre_save = cpu_pre_save,
+    .post_save = cpu_post_save,
+    .pre_load = cpu_pre_load,
     .post_load = cpu_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32_ARRAY(env.regs, ARMCPU, 16),
-- 
2.19.1

  parent reply	other threads:[~2018-10-10 20:38 UTC|newest]

Thread overview: 106+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-10 20:37 [Qemu-arm] [PATCH v6 00/14] More fully implement ARM PMUv3 Aaron Lindsay
2018-10-10 20:37 ` [Qemu-devel] " Aaron Lindsay
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 01/14] target/arm: Mark PMINTENCLR and PMINTENCLR_EL1 accesses as possibly doing IO Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-15 19:19   ` Richard Henderson
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 02/14] target/arm: Mask PMOVSR writes based on supported counters Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-15 19:27   ` [Qemu-arm] " Richard Henderson
2018-10-15 19:27     ` Richard Henderson
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 03/14] migration: Add post_save function to VMStateDescription Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-15 19:36   ` Richard Henderson
2018-10-15 19:36     ` Richard Henderson
2018-10-16  8:21     ` Dr. David Alan Gilbert
2018-10-16  8:21       ` Dr. David Alan Gilbert
2018-10-16 13:55       ` Aaron Lindsay
2018-10-16 13:55         ` Aaron Lindsay
2018-10-16 14:06         ` [Qemu-arm] " Dr. David Alan Gilbert
2018-10-16 14:06           ` Dr. David Alan Gilbert
2018-10-16 14:41           ` [Qemu-arm] " Aaron Lindsay
2018-10-16 14:41             ` Aaron Lindsay
2018-10-16 14:43             ` [Qemu-arm] " Dr. David Alan Gilbert
2018-10-16 14:43               ` Dr. David Alan Gilbert
2018-10-17 12:07           ` [Qemu-arm] " Juan Quintela
2018-10-17 12:07             ` [Qemu-devel] " Juan Quintela
2018-10-17 12:05     ` [Qemu-arm] " Juan Quintela
2018-10-17 12:05       ` [Qemu-devel] " Juan Quintela
2018-10-10 20:37 ` Aaron Lindsay [this message]
2018-10-10 20:37   ` [Qemu-devel] [PATCH v6 04/14] target/arm: Swap PMU values before/after migrations Aaron Lindsay
2018-10-15 19:45   ` [Qemu-arm] " Richard Henderson
2018-10-15 19:45     ` Richard Henderson
2018-10-15 20:44     ` [Qemu-arm] " Aaron Lindsay
2018-10-15 20:44       ` Aaron Lindsay
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 05/14] target/arm: Reorganize PMCCNTR accesses Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-15 19:50   ` [Qemu-arm] " Richard Henderson
2018-10-15 19:50     ` Richard Henderson
2018-10-15 20:19     ` [Qemu-arm] " Richard Henderson
2018-10-15 20:19       ` Richard Henderson
2018-10-15 20:30       ` Aaron Lindsay
2018-10-15 20:30         ` Aaron Lindsay
2018-10-15 20:47         ` [Qemu-arm] " Richard Henderson
2018-10-15 20:47           ` Richard Henderson
2018-10-15 20:29     ` [Qemu-arm] " Aaron Lindsay
2018-10-15 20:29       ` Aaron Lindsay
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 06/14] target/arm: Filter cycle counter based on PMCCFILTR_EL0 Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-15 20:51   ` [Qemu-arm] " Richard Henderson
2018-10-15 20:51     ` Richard Henderson
     [not found]     ` <20181016122542.GM3671@okra.localdomain>
2018-10-16 15:26       ` [Qemu-arm] " Aaron Lindsay
2018-10-16 15:26         ` Aaron Lindsay
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 07/14] target/arm: Allow AArch32 access for PMCCFILTR Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-15 21:06   ` [Qemu-arm] " Richard Henderson
2018-10-15 21:06     ` Richard Henderson
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 08/14] target/arm: Implement PMOVSSET Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-15 21:26   ` Richard Henderson
2018-10-10 20:37 ` [Qemu-devel] [PATCH v6 09/14] target/arm: Add array for supported PMU events, generate PMCEID[01] Aaron Lindsay
2018-10-10 20:37   ` Aaron Lindsay
2018-10-15 21:35   ` [Qemu-arm] " Richard Henderson
2018-10-15 21:35     ` Richard Henderson
2018-10-16  9:55     ` [Qemu-arm] " Aaron Lindsay
2018-10-16  9:55       ` Aaron Lindsay
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 10/14] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-17  0:02   ` [Qemu-arm] " Richard Henderson
2018-10-17  0:02     ` Richard Henderson
2018-10-10 20:37 ` [Qemu-devel] [PATCH v6 11/14] target/arm: PMU: Add instruction and cycle events Aaron Lindsay
2018-10-10 20:37   ` Aaron Lindsay
2018-10-17  0:04   ` [Qemu-arm] " Richard Henderson
2018-10-17  0:04     ` Richard Henderson
2018-10-17 19:47     ` Aaron Lindsay
2018-10-17 19:47       ` Aaron Lindsay
2018-10-17 21:12       ` Richard Henderson
2018-10-17 21:12         ` Richard Henderson
2018-10-18 16:20         ` [Qemu-arm] " Aaron Lindsay
2018-10-18 16:20           ` Aaron Lindsay
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 12/14] target/arm: PMU: Set PMCR.N to 4 Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-17  0:09   ` [Qemu-arm] " Richard Henderson
2018-10-17  0:09     ` Richard Henderson
2018-10-17 19:20     ` Aaron Lindsay
2018-10-17 19:20       ` Aaron Lindsay
2018-10-17 19:34       ` [Qemu-arm] " Richard Henderson
2018-10-17 19:34         ` Richard Henderson
2018-10-17 20:25         ` [Qemu-arm] " Aaron Lindsay
2018-10-17 20:25           ` Aaron Lindsay
2018-10-17 21:14           ` [Qemu-arm] " Richard Henderson
2018-10-17 21:14             ` Richard Henderson
2018-10-18 10:20             ` [Qemu-arm] " Peter Maydell
2018-10-18 10:20               ` Peter Maydell
2018-10-18 19:55             ` [Qemu-arm] " Aaron Lindsay
2018-10-18 19:55               ` Aaron Lindsay
2018-10-10 20:37 ` [Qemu-devel] [PATCH v6 13/14] target/arm: Implement PMSWINC Aaron Lindsay
2018-10-10 20:37   ` Aaron Lindsay
2018-10-17  0:15   ` [Qemu-arm] " Richard Henderson
2018-10-17  0:15     ` Richard Henderson
2018-10-10 20:37 ` [Qemu-arm] [PATCH v6 14/14] target/arm: Send interrupts on PMU counter overflow Aaron Lindsay
2018-10-10 20:37   ` [Qemu-devel] " Aaron Lindsay
2018-10-16 12:01 ` [Qemu-devel] [PATCH v6 00/14] More fully implement ARM PMUv3 Peter Maydell
2018-10-16 12:01   ` Peter Maydell
2018-10-16 12:46   ` [Qemu-arm] " Aaron Lindsay
2018-10-16 12:46     ` [Qemu-devel] " Aaron Lindsay
2018-10-16 17:29     ` [Qemu-arm] " Richard Henderson
2018-10-16 17:29       ` [Qemu-devel] " Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181010203735.27918-5-aclindsa@gmail.com \
    --to=aclindsa@gmail.com \
    --cc=alistair.francis@xilinx.com \
    --cc=crosthwaite.peter@gmail.com \
    --cc=digantd@codeaurora.org \
    --cc=mspradli@codeaurora.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=wei@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.