[PATCH 1/5] drm/i915/crt: split out intel_crt_present() to platform specific setup

* [PATCH 1/5] drm/i915/crt: split out intel_crt_present() to platform specific setup
@ 2019-01-21 14:21 Jani Nikula
  2019-01-21 14:21 ` [PATCH 2/5] drm/i915/lvds: only call intel_lvds_init() on platforms that might have LVDS Jani Nikula
                   ` (6 more replies)
  0 siblings, 7 replies; 15+ messages in thread
From: Jani Nikula @ 2019-01-21 14:21 UTC (permalink / raw)
  To: intel-gfx; +Cc: jani.nikula

With new platforms not having CRT support and most conditions in
intel_crt_present() being specific to DDI, split out the CRT
initialization to platform specific blocks in the if ladder. Add new
Pineview block for this.

This puts intel_crt_init() more in line with the rest of the outputs,
and makes it slightly easier for the uninitiated to figure out which
platforms actually have what.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 37 ++++++++++++++++++----------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 2fa9f4aec08e..e8bc297c60ab 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14245,23 +14245,17 @@ static bool has_edp_a(struct drm_i915_private *dev_priv)
 	return true;
 }
 
-static bool intel_crt_present(struct drm_i915_private *dev_priv)
+static bool intel_ddi_crt_present(struct drm_i915_private *dev_priv)
 {
-	if (INTEL_GEN(dev_priv) >= 9)
-		return false;
-
 	if (IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv))
 		return false;
 
-	if (IS_CHERRYVIEW(dev_priv))
-		return false;
-
 	if (HAS_PCH_LPT_H(dev_priv) &&
 	    I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
 		return false;
 
 	/* DDI E can't be used if DDI A requires 4 lanes */
-	if (HAS_DDI(dev_priv) && I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
+	if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
 		return false;
 
 	if (!dev_priv->vbt.int_crt_support)
@@ -14323,9 +14317,6 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 	 */
 	intel_lvds_init(dev_priv);
 
-	if (intel_crt_present(dev_priv))
-		intel_crt_init(dev_priv);
-
 	if (IS_ICELAKE(dev_priv)) {
 		intel_ddi_init(dev_priv, PORT_A);
 		intel_ddi_init(dev_priv, PORT_B);
@@ -14354,6 +14345,9 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 	} else if (HAS_DDI(dev_priv)) {
 		int found;
 
+		if (intel_ddi_crt_present(dev_priv))
+			intel_crt_init(dev_priv);
+
 		/*
 		 * Haswell uses DDI functions to detect digital outputs.
 		 * On SKL pre-D0 the strap isn't connected, so we assume
@@ -14385,6 +14379,10 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 
 	} else if (HAS_PCH_SPLIT(dev_priv)) {
 		int found;
+
+		if (dev_priv->vbt.int_crt_support)
+			intel_crt_init(dev_priv);
+
 		dpd_is_edp = intel_dp_is_port_edp(dev_priv, PORT_D);
 
 		if (has_edp_a(dev_priv))
@@ -14413,6 +14411,9 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		bool has_edp, has_port;
 
+		if (IS_VALLEYVIEW(dev_priv) && dev_priv->vbt.int_crt_support)
+			intel_crt_init(dev_priv);
+
 		/*
 		 * The DP_DETECTED bit is the latched state of the DDC
 		 * SDA pin at boot. However since eDP doesn't require DDC
@@ -14455,9 +14456,15 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 		}
 
 		vlv_dsi_init(dev_priv);
-	} else if (!IS_GEN(dev_priv, 2) && !IS_PINEVIEW(dev_priv)) {
+	} else if (IS_PINEVIEW(dev_priv)) {
+		if (dev_priv->vbt.int_crt_support)
+			intel_crt_init(dev_priv);
+	} else if (IS_GEN_RANGE(dev_priv, 3, 4)) {
 		bool found = false;
 
+		if (dev_priv->vbt.int_crt_support)
+			intel_crt_init(dev_priv);
+
 		if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
 			DRM_DEBUG_KMS("probing SDVOB\n");
 			found = intel_sdvo_init(dev_priv, GEN3_SDVOB, PORT_B);
@@ -14489,8 +14496,12 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 
 		if (IS_G4X(dev_priv) && (I915_READ(DP_D) & DP_DETECTED))
 			intel_dp_init(dev_priv, DP_D, PORT_D);
-	} else if (IS_GEN(dev_priv, 2))
+	} else if (IS_GEN(dev_priv, 2)) {
+		if (dev_priv->vbt.int_crt_support)
+			intel_crt_init(dev_priv);
+
 		intel_dvo_init(dev_priv);
+	}
 
 	if (SUPPORTS_TV(dev_priv))
 		intel_tv_init(dev_priv);
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply related	[flat|nested] 15+ messages in thread