[dm-devel] remove REQ_OP_WRITE_SAME v2

[dm-devel] remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
have two callers left, and both just export optional protocol features
to remote systems: DRBD and the target code.

For the target code the only real use case was zeroing offload, which
is kept with this series, and for DRBD I suspect the same based on the
usage.

    git://git.infradead.org/users/hch/block.git delete-write-same

Gitweb:

    http://git.infradead.org/users/hch/block.git/shortlog/refs/heads/delete-write-same

Changes since v2:
 - split up
 - rebased ontop of five years of kernel change, including the totally
   pointless addition of REQ_OP_WRITE_SAME in rnbd

Changes from RFC:
 - add zeroing offload for the SCSI target.

Diffstat:
 block/blk-core.c                   |   13 -----
 block/blk-lib.c                    |   91 -------------------------------------
 block/blk-merge.c                  |   40 ----------------
 block/blk-settings.c               |   16 ------
 block/blk-sysfs.c                  |    8 ---
 block/blk-zoned.c                  |    1 
 block/blk.h                        |    1 
 block/bounce.c                     |    3 -
 drivers/block/drbd/drbd_main.c     |   31 +-----------
 drivers/block/drbd/drbd_nl.c       |   72 -----------------------------
 drivers/block/drbd/drbd_receiver.c |   47 ++-----------------
 drivers/block/drbd/drbd_req.c      |    1 
 drivers/block/drbd/drbd_worker.c   |    5 --
 drivers/block/rnbd/rnbd-clt.c      |    7 --
 drivers/block/rnbd/rnbd-clt.h      |    1 
 drivers/block/rnbd/rnbd-proto.h    |    6 --
 drivers/block/rnbd/rnbd-srv.c      |    3 -
 drivers/md/dm-core.h               |    1 
 drivers/md/dm-crypt.c              |    1 
 drivers/md/dm-ebs-target.c         |    1 
 drivers/md/dm-io.c                 |   22 --------
 drivers/md/dm-linear.c             |    1 
 drivers/md/dm-mpath.c              |    1 
 drivers/md/dm-rq.c                 |    3 -
 drivers/md/dm-stripe.c             |    4 -
 drivers/md/dm-table.c              |   29 -----------
 drivers/md/dm-zone.c               |    4 -
 drivers/md/dm.c                    |   15 ------
 drivers/md/md-linear.c             |    1 
 drivers/md/md-multipath.c          |    1 
 drivers/md/md.h                    |    7 --
 drivers/md/raid0.c                 |    2 
 drivers/md/raid1.c                 |    4 -
 drivers/md/raid10.c                |    1 
 drivers/md/raid5.c                 |    1 
 drivers/scsi/cxlflash/vlun.c       |    4 -
 drivers/scsi/sd.c                  |   75 ++----------------------------
 drivers/scsi/sd_zbc.c              |    2 
 include/linux/bio.h                |    3 -
 include/linux/blk_types.h          |    2 
 include/linux/blkdev.h             |   19 -------
 include/linux/device-mapper.h      |    6 --
 kernel/trace/blktrace.c            |    1 
 43 files changed, 30 insertions(+), 527 deletions(-)

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
have two callers left, and both just export optional protocol features
to remote systems: DRBD and the target code.

For the target code the only real use case was zeroing offload, which
is kept with this series, and for DRBD I suspect the same based on the
usage.

    git://git.infradead.org/users/hch/block.git delete-write-same

Gitweb:

    http://git.infradead.org/users/hch/block.git/shortlog/refs/heads/delete-write-same

Changes since v2:
 - split up
 - rebased ontop of five years of kernel change, including the totally
   pointless addition of REQ_OP_WRITE_SAME in rnbd

Changes from RFC:
 - add zeroing offload for the SCSI target.

Diffstat:
 block/blk-core.c                   |   13 -----
 block/blk-lib.c                    |   91 -------------------------------------
 block/blk-merge.c                  |   40 ----------------
 block/blk-settings.c               |   16 ------
 block/blk-sysfs.c                  |    8 ---
 block/blk-zoned.c                  |    1 
 block/blk.h                        |    1 
 block/bounce.c                     |    3 -
 drivers/block/drbd/drbd_main.c     |   31 +-----------
 drivers/block/drbd/drbd_nl.c       |   72 -----------------------------
 drivers/block/drbd/drbd_receiver.c |   47 ++-----------------
 drivers/block/drbd/drbd_req.c      |    1 
 drivers/block/drbd/drbd_worker.c   |    5 --
 drivers/block/rnbd/rnbd-clt.c      |    7 --
 drivers/block/rnbd/rnbd-clt.h      |    1 
 drivers/block/rnbd/rnbd-proto.h    |    6 --
 drivers/block/rnbd/rnbd-srv.c      |    3 -
 drivers/md/dm-core.h               |    1 
 drivers/md/dm-crypt.c              |    1 
 drivers/md/dm-ebs-target.c         |    1 
 drivers/md/dm-io.c                 |   22 --------
 drivers/md/dm-linear.c             |    1 
 drivers/md/dm-mpath.c              |    1 
 drivers/md/dm-rq.c                 |    3 -
 drivers/md/dm-stripe.c             |    4 -
 drivers/md/dm-table.c              |   29 -----------
 drivers/md/dm-zone.c               |    4 -
 drivers/md/dm.c                    |   15 ------
 drivers/md/md-linear.c             |    1 
 drivers/md/md-multipath.c          |    1 
 drivers/md/md.h                    |    7 --
 drivers/md/raid0.c                 |    2 
 drivers/md/raid1.c                 |    4 -
 drivers/md/raid10.c                |    1 
 drivers/md/raid5.c                 |    1 
 drivers/scsi/cxlflash/vlun.c       |    4 -
 drivers/scsi/sd.c                  |   75 ++----------------------------
 drivers/scsi/sd_zbc.c              |    2 
 include/linux/bio.h                |    3 -
 include/linux/blk_types.h          |    2 
 include/linux/blkdev.h             |   19 -------
 include/linux/device-mapper.h      |    6 --
 kernel/trace/blktrace.c            |    1 
 43 files changed, 30 insertions(+), 527 deletions(-)

remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
have two callers left, and both just export optional protocol features
to remote systems: DRBD and the target code.

For the target code the only real use case was zeroing offload, which
is kept with this series, and for DRBD I suspect the same based on the
usage.

    git://git.infradead.org/users/hch/block.git delete-write-same

Gitweb:

    http://git.infradead.org/users/hch/block.git/shortlog/refs/heads/delete-write-same

Changes since v2:
 - split up
 - rebased ontop of five years of kernel change, including the totally
   pointless addition of REQ_OP_WRITE_SAME in rnbd

Changes from RFC:
 - add zeroing offload for the SCSI target.

Diffstat:
 block/blk-core.c                   |   13 -----
 block/blk-lib.c                    |   91 -------------------------------------
 block/blk-merge.c                  |   40 ----------------
 block/blk-settings.c               |   16 ------
 block/blk-sysfs.c                  |    8 ---
 block/blk-zoned.c                  |    1 
 block/blk.h                        |    1 
 block/bounce.c                     |    3 -
 drivers/block/drbd/drbd_main.c     |   31 +-----------
 drivers/block/drbd/drbd_nl.c       |   72 -----------------------------
 drivers/block/drbd/drbd_receiver.c |   47 ++-----------------
 drivers/block/drbd/drbd_req.c      |    1 
 drivers/block/drbd/drbd_worker.c   |    5 --
 drivers/block/rnbd/rnbd-clt.c      |    7 --
 drivers/block/rnbd/rnbd-clt.h      |    1 
 drivers/block/rnbd/rnbd-proto.h    |    6 --
 drivers/block/rnbd/rnbd-srv.c      |    3 -
 drivers/md/dm-core.h               |    1 
 drivers/md/dm-crypt.c              |    1 
 drivers/md/dm-ebs-target.c         |    1 
 drivers/md/dm-io.c                 |   22 --------
 drivers/md/dm-linear.c             |    1 
 drivers/md/dm-mpath.c              |    1 
 drivers/md/dm-rq.c                 |    3 -
 drivers/md/dm-stripe.c             |    4 -
 drivers/md/dm-table.c              |   29 -----------
 drivers/md/dm-zone.c               |    4 -
 drivers/md/dm.c                    |   15 ------
 drivers/md/md-linear.c             |    1 
 drivers/md/md-multipath.c          |    1 
 drivers/md/md.h                    |    7 --
 drivers/md/raid0.c                 |    2 
 drivers/md/raid1.c                 |    4 -
 drivers/md/raid10.c                |    1 
 drivers/md/raid5.c                 |    1 
 drivers/scsi/cxlflash/vlun.c       |    4 -
 drivers/scsi/sd.c                  |   75 ++----------------------------
 drivers/scsi/sd_zbc.c              |    2 
 include/linux/bio.h                |    3 -
 include/linux/blk_types.h          |    2 
 include/linux/blkdev.h             |   19 -------
 include/linux/device-mapper.h      |    6 --
 kernel/trace/blktrace.c            |    1 
 43 files changed, 30 insertions(+), 527 deletions(-)

[dm-devel] [PATCH 1/7] cxlflash: query write_zeroes limit for zeroing

[Christoph Hellwig]

The write_same and write_zeroes limits for SCSI are effectively the
same, so the current code works just fine.  But we plan to remove
REQ_OP_WRITE_SAME support, so switch to quering the write zeroes
limit for a zeroing WRITE SAME operation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/cxlflash/vlun.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index 01917b28cdb65..5c74dc7c22889 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -430,8 +430,8 @@ static int write_same16(struct scsi_device *sdev,
 	struct device *dev = &cfg->dev->dev;
 	const u32 s = ilog2(sdev->sector_size) - 9;
 	const u32 to = sdev->request_queue->rq_timeout;
-	const u32 ws_limit = blk_queue_get_max_sectors(sdev->request_queue,
-						       REQ_OP_WRITE_SAME) >> s;
+	const u32 ws_limit =
+		sdev->request_queue->limits.max_write_zeroes_sectors >> s;
 
 	cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
 	scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL);
-- 
2.30.2

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[Drbd-dev] [PATCH 1/7] cxlflash: query write_zeroes limit for zeroing

[Christoph Hellwig]

The write_same and write_zeroes limits for SCSI are effectively the
same, so the current code works just fine.  But we plan to remove
REQ_OP_WRITE_SAME support, so switch to quering the write zeroes
limit for a zeroing WRITE SAME operation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/cxlflash/vlun.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index 01917b28cdb65..5c74dc7c22889 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -430,8 +430,8 @@ static int write_same16(struct scsi_device *sdev,
 	struct device *dev = &cfg->dev->dev;
 	const u32 s = ilog2(sdev->sector_size) - 9;
 	const u32 to = sdev->request_queue->rq_timeout;
-	const u32 ws_limit = blk_queue_get_max_sectors(sdev->request_queue,
-						       REQ_OP_WRITE_SAME) >> s;
+	const u32 ws_limit =
+		sdev->request_queue->limits.max_write_zeroes_sectors >> s;
 
 	cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
 	scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL);
-- 
2.30.2

[PATCH 1/7] cxlflash: query write_zeroes limit for zeroing

[Christoph Hellwig]

The write_same and write_zeroes limits for SCSI are effectively the
same, so the current code works just fine.  But we plan to remove
REQ_OP_WRITE_SAME support, so switch to quering the write zeroes
limit for a zeroing WRITE SAME operation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/cxlflash/vlun.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index 01917b28cdb65..5c74dc7c22889 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -430,8 +430,8 @@ static int write_same16(struct scsi_device *sdev,
 	struct device *dev = &cfg->dev->dev;
 	const u32 s = ilog2(sdev->sector_size) - 9;
 	const u32 to = sdev->request_queue->rq_timeout;
-	const u32 ws_limit = blk_queue_get_max_sectors(sdev->request_queue,
-						       REQ_OP_WRITE_SAME) >> s;
+	const u32 ws_limit =
+		sdev->request_queue->limits.max_write_zeroes_sectors >> s;
 
 	cmd_buf = kzalloc(CMD_BUFSIZE, GFP_KERNEL);
 	scsi_cmd = kzalloc(MAX_COMMAND_SIZE, GFP_KERNEL);
-- 
2.30.2

Re: [dm-devel] [PATCH 1/7] cxlflash: query write_zeroes limit for zeroing

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> The write_same and write_zeroes limits for SCSI are effectively the
> same, so the current code works just fine.  But we plan to remove
> REQ_OP_WRITE_SAME support, so switch to quering the write zeroes
> limit for a zeroing WRITE SAME operation.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 1/7] cxlflash: query write_zeroes limit for zeroing

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> The write_same and write_zeroes limits for SCSI are effectively the
> same, so the current code works just fine.  But we plan to remove
> REQ_OP_WRITE_SAME support, so switch to quering the write zeroes
> limit for a zeroing WRITE SAME operation.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Re: [PATCH 1/7] cxlflash: query write_zeroes limit for zeroing

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> The write_same and write_zeroes limits for SCSI are effectively the
> same, so the current code works just fine.  But we plan to remove
> REQ_OP_WRITE_SAME support, so switch to quering the write zeroes
> limit for a zeroing WRITE SAME operation.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

[dm-devel] [PATCH 2/7] drbd: drop REQ_OP_WRITE_SAME support

[Christoph Hellwig]

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
code, which has switched to use REQ_OP_WRITE_ZEROES long ago.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/drbd/drbd_main.c     | 31 ++-----------
 drivers/block/drbd/drbd_nl.c       | 72 +-----------------------------
 drivers/block/drbd/drbd_receiver.c | 47 +++----------------
 drivers/block/drbd/drbd_req.c      |  1 -
 drivers/block/drbd/drbd_worker.c   |  5 ---
 5 files changed, 13 insertions(+), 143 deletions(-)

diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 6f450816c4fa6..96881d5babd9e 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -912,7 +912,7 @@ assign_p_sizes_qlim(struct drbd_device *device, struct p_sizes *p,
 		p->qlim->io_min = cpu_to_be32(queue_io_min(q));
 		p->qlim->io_opt = cpu_to_be32(queue_io_opt(q));
 		p->qlim->discard_enabled = blk_queue_discard(q);
-		p->qlim->write_same_capable = !!q->limits.max_write_same_sectors;
+		p->qlim->write_same_capable = 0;
 	} else {
 		q = device->rq_queue;
 		p->qlim->physical_block_size = cpu_to_be32(queue_physical_block_size(q));
@@ -1591,9 +1591,6 @@ static int _drbd_send_bio(struct drbd_peer_device *peer_device, struct bio *bio)
 					 ? 0 : MSG_MORE);
 		if (err)
 			return err;
-		/* REQ_OP_WRITE_SAME has only one segment */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	return 0;
 }
@@ -1612,9 +1609,6 @@ static int _drbd_send_zc_bio(struct drbd_peer_device *peer_device, struct bio *b
 				      bio_iter_last(bvec, iter) ? 0 : MSG_MORE);
 		if (err)
 			return err;
-		/* REQ_OP_WRITE_SAME has only one segment */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	return 0;
 }
@@ -1646,7 +1640,6 @@ static u32 bio_flags_to_wire(struct drbd_connection *connection,
 		return  (bio->bi_opf & REQ_SYNC ? DP_RW_SYNC : 0) |
 			(bio->bi_opf & REQ_FUA ? DP_FUA : 0) |
 			(bio->bi_opf & REQ_PREFLUSH ? DP_FLUSH : 0) |
-			(bio_op(bio) == REQ_OP_WRITE_SAME ? DP_WSAME : 0) |
 			(bio_op(bio) == REQ_OP_DISCARD ? DP_DISCARD : 0) |
 			(bio_op(bio) == REQ_OP_WRITE_ZEROES ?
 			  ((connection->agreed_features & DRBD_FF_WZEROES) ?
@@ -1665,7 +1658,6 @@ int drbd_send_dblock(struct drbd_peer_device *peer_device, struct drbd_request *
 	struct drbd_device *device = peer_device->device;
 	struct drbd_socket *sock;
 	struct p_data *p;
-	struct p_wsame *wsame = NULL;
 	void *digest_out;
 	unsigned int dp_flags = 0;
 	int digest_size;
@@ -1703,29 +1695,14 @@ int drbd_send_dblock(struct drbd_peer_device *peer_device, struct drbd_request *
 		err = __send_command(peer_device->connection, device->vnr, sock, cmd, sizeof(*t), NULL, 0);
 		goto out;
 	}
-	if (dp_flags & DP_WSAME) {
-		/* this will only work if DRBD_FF_WSAME is set AND the
-		 * handshake agreed that all nodes and backend devices are
-		 * WRITE_SAME capable and agree on logical_block_size */
-		wsame = (struct p_wsame*)p;
-		digest_out = wsame + 1;
-		wsame->size = cpu_to_be32(req->i.size);
-	} else
-		digest_out = p + 1;
+	digest_out = p + 1;
 
 	/* our digest is still only over the payload.
 	 * TRIM does not carry any payload. */
 	if (digest_size)
 		drbd_csum_bio(peer_device->connection->integrity_tfm, req->master_bio, digest_out);
-	if (wsame) {
-		err =
-		    __send_command(peer_device->connection, device->vnr, sock, P_WSAME,
-				   sizeof(*wsame) + digest_size, NULL,
-				   bio_iovec(req->master_bio).bv_len);
-	} else
-		err =
-		    __send_command(peer_device->connection, device->vnr, sock, P_DATA,
-				   sizeof(*p) + digest_size, NULL, req->i.size);
+	err = __send_command(peer_device->connection, device->vnr, sock, P_DATA,
+			     sizeof(*p) + digest_size, NULL, req->i.size);
 	if (!err) {
 		/* For protocol A, we have to memcpy the payload into
 		 * socket buffers, as we may complete right away
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 44ccf8b4f4b29..02030c9c4d3b1 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1265,71 +1265,6 @@ static void fixup_write_zeroes(struct drbd_device *device, struct request_queue
 		q->limits.max_write_zeroes_sectors = 0;
 }
 
-static void decide_on_write_same_support(struct drbd_device *device,
-			struct request_queue *q,
-			struct request_queue *b, struct o_qlim *o,
-			bool disable_write_same)
-{
-	struct drbd_peer_device *peer_device = first_peer_device(device);
-	struct drbd_connection *connection = peer_device->connection;
-	bool can_do = b ? b->limits.max_write_same_sectors : true;
-
-	if (can_do && disable_write_same) {
-		can_do = false;
-		drbd_info(peer_device, "WRITE_SAME disabled by config\n");
-	}
-
-	if (can_do && connection->cstate >= C_CONNECTED && !(connection->agreed_features & DRBD_FF_WSAME)) {
-		can_do = false;
-		drbd_info(peer_device, "peer does not support WRITE_SAME\n");
-	}
-
-	if (o) {
-		/* logical block size; queue_logical_block_size(NULL) is 512 */
-		unsigned int peer_lbs = be32_to_cpu(o->logical_block_size);
-		unsigned int me_lbs_b = queue_logical_block_size(b);
-		unsigned int me_lbs = queue_logical_block_size(q);
-
-		if (me_lbs_b != me_lbs) {
-			drbd_warn(device,
-				"logical block size of local backend does not match (drbd:%u, backend:%u); was this a late attach?\n",
-				me_lbs, me_lbs_b);
-			/* rather disable write same than trigger some BUG_ON later in the scsi layer. */
-			can_do = false;
-		}
-		if (me_lbs_b != peer_lbs) {
-			drbd_warn(peer_device, "logical block sizes do not match (me:%u, peer:%u); this may cause problems.\n",
-				me_lbs, peer_lbs);
-			if (can_do) {
-				drbd_dbg(peer_device, "logical block size mismatch: WRITE_SAME disabled.\n");
-				can_do = false;
-			}
-			me_lbs = max(me_lbs, me_lbs_b);
-			/* We cannot change the logical block size of an in-use queue.
-			 * We can only hope that access happens to be properly aligned.
-			 * If not, the peer will likely produce an IO error, and detach. */
-			if (peer_lbs > me_lbs) {
-				if (device->state.role != R_PRIMARY) {
-					blk_queue_logical_block_size(q, peer_lbs);
-					drbd_warn(peer_device, "logical block size set to %u\n", peer_lbs);
-				} else {
-					drbd_warn(peer_device,
-						"current Primary must NOT adjust logical block size (%u -> %u); hope for the best.\n",
-						me_lbs, peer_lbs);
-				}
-			}
-		}
-		if (can_do && !o->write_same_capable) {
-			/* If we introduce an open-coded write-same loop on the receiving side,
-			 * the peer would present itself as "capable". */
-			drbd_dbg(peer_device, "WRITE_SAME disabled (peer device not capable)\n");
-			can_do = false;
-		}
-	}
-
-	blk_queue_max_write_same_sectors(q, can_do ? DRBD_MAX_BBIO_SECTORS : 0);
-}
-
 static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backing_dev *bdev,
 				   unsigned int max_bio_size, struct o_qlim *o)
 {
@@ -1339,7 +1274,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 	struct request_queue *b = NULL;
 	struct disk_conf *dc;
 	bool discard_zeroes_if_aligned = true;
-	bool disable_write_same = false;
 
 	if (bdev) {
 		b = bdev->backing_bdev->bd_disk->queue;
@@ -1349,7 +1283,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 		dc = rcu_dereference(device->ldev->disk_conf);
 		max_segments = dc->max_bio_bvecs;
 		discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned;
-		disable_write_same = dc->disable_write_same;
 		rcu_read_unlock();
 
 		blk_set_stacking_limits(&q->limits);
@@ -1360,7 +1293,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 	blk_queue_max_segments(q, max_segments ? max_segments : BLK_MAX_SEGMENTS);
 	blk_queue_segment_boundary(q, PAGE_SIZE-1);
 	decide_on_discard_support(device, q, b, discard_zeroes_if_aligned);
-	decide_on_write_same_support(device, q, b, o, disable_write_same);
 
 	if (b) {
 		blk_stack_limits(&q->limits, &b->limits, 0);
@@ -1666,8 +1598,8 @@ int drbd_adm_disk_opts(struct sk_buff *skb, struct genl_info *info)
 	if (write_ordering_changed(old_disk_conf, new_disk_conf))
 		drbd_bump_write_ordering(device->resource, NULL, WO_BDEV_FLUSH);
 
-	if (old_disk_conf->discard_zeroes_if_aligned != new_disk_conf->discard_zeroes_if_aligned
-	||  old_disk_conf->disable_write_same != new_disk_conf->disable_write_same)
+	if (old_disk_conf->discard_zeroes_if_aligned !=
+	    new_disk_conf->discard_zeroes_if_aligned)
 		drbd_reconsider_queue_parameters(device, device->ldev, NULL);
 
 	drbd_md_sync(device);
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 04e3ec12d8b49..46e2ec0bd2f98 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1604,19 +1604,7 @@ static void drbd_issue_peer_discard_or_zero_out(struct drbd_device *device, stru
 	drbd_endio_write_sec_final(peer_req);
 }
 
-static void drbd_issue_peer_wsame(struct drbd_device *device,
-				  struct drbd_peer_request *peer_req)
-{
-	struct block_device *bdev = device->ldev->backing_bdev;
-	sector_t s = peer_req->i.sector;
-	sector_t nr = peer_req->i.size >> 9;
-	if (blkdev_issue_write_same(bdev, s, nr, GFP_NOIO, peer_req->pages))
-		peer_req->flags |= EE_WAS_ERROR;
-	drbd_endio_write_sec_final(peer_req);
-}
-
-
-/*
+/**
  * drbd_submit_peer_request()
  * @device:	DRBD device.
  * @peer_req:	peer request
@@ -1651,7 +1639,7 @@ int drbd_submit_peer_request(struct drbd_device *device,
 	 * Correctness first, performance later.  Next step is to code an
 	 * asynchronous variant of the same.
 	 */
-	if (peer_req->flags & (EE_TRIM|EE_WRITE_SAME|EE_ZEROOUT)) {
+	if (peer_req->flags & (EE_TRIM | EE_ZEROOUT)) {
 		/* wait for all pending IO completions, before we start
 		 * zeroing things out. */
 		conn_wait_active_ee_empty(peer_req->peer_device->connection);
@@ -1668,10 +1656,7 @@ int drbd_submit_peer_request(struct drbd_device *device,
 			spin_unlock_irq(&device->resource->req_lock);
 		}
 
-		if (peer_req->flags & (EE_TRIM|EE_ZEROOUT))
-			drbd_issue_peer_discard_or_zero_out(device, peer_req);
-		else /* EE_WRITE_SAME */
-			drbd_issue_peer_wsame(device, peer_req);
+		drbd_issue_peer_discard_or_zero_out(device, peer_req);
 		return 0;
 	}
 
@@ -1854,7 +1839,6 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 	unsigned long *data;
 	struct p_trim *trim = (pi->cmd == P_TRIM) ? pi->data : NULL;
 	struct p_trim *zeroes = (pi->cmd == P_ZEROES) ? pi->data : NULL;
-	struct p_trim *wsame = (pi->cmd == P_WSAME) ? pi->data : NULL;
 
 	digest_size = 0;
 	if (!trim && peer_device->connection->peer_integrity_tfm) {
@@ -1869,7 +1853,7 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		data_size -= digest_size;
 	}
 
-	/* assume request_size == data_size, but special case trim and wsame. */
+	/* assume request_size == data_size, but special case trim. */
 	ds = data_size;
 	if (trim) {
 		if (!expect(data_size == 0))
@@ -1879,23 +1863,11 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		if (!expect(data_size == 0))
 			return NULL;
 		ds = be32_to_cpu(zeroes->size);
-	} else if (wsame) {
-		if (data_size != queue_logical_block_size(device->rq_queue)) {
-			drbd_err(peer_device, "data size (%u) != drbd logical block size (%u)\n",
-				data_size, queue_logical_block_size(device->rq_queue));
-			return NULL;
-		}
-		if (data_size != bdev_logical_block_size(device->ldev->backing_bdev)) {
-			drbd_err(peer_device, "data size (%u) != backend logical block size (%u)\n",
-				data_size, bdev_logical_block_size(device->ldev->backing_bdev));
-			return NULL;
-		}
-		ds = be32_to_cpu(wsame->size);
 	}
 
 	if (!expect(IS_ALIGNED(ds, 512)))
 		return NULL;
-	if (trim || wsame || zeroes) {
+	if (trim || zeroes) {
 		if (!expect(ds <= (DRBD_MAX_BBIO_SECTORS << 9)))
 			return NULL;
 	} else if (!expect(ds <= DRBD_MAX_BIO_SIZE))
@@ -1927,8 +1899,6 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		peer_req->flags |= EE_ZEROOUT;
 		return peer_req;
 	}
-	if (wsame)
-		peer_req->flags |= EE_WRITE_SAME;
 
 	/* receive payload size bytes into page chain */
 	ds = data_size;
@@ -2427,8 +2397,6 @@ static unsigned long wire_flags_to_bio_op(u32 dpf)
 		return REQ_OP_WRITE_ZEROES;
 	if (dpf & DP_DISCARD)
 		return REQ_OP_DISCARD;
-	if (dpf & DP_WSAME)
-		return REQ_OP_WRITE_SAME;
 	else
 		return REQ_OP_WRITE;
 }
@@ -2695,11 +2663,11 @@ static int receive_Data(struct drbd_connection *connection, struct packet_info *
 		update_peer_seq(peer_device, peer_seq);
 		spin_lock_irq(&device->resource->req_lock);
 	}
-	/* TRIM and WRITE_SAME are processed synchronously,
+	/* TRIM and is processed synchronously,
 	 * we wait for all pending requests, respectively wait for
 	 * active_ee to become empty in drbd_submit_peer_request();
 	 * better not add ourselves here. */
-	if ((peer_req->flags & (EE_TRIM|EE_WRITE_SAME|EE_ZEROOUT)) == 0)
+	if ((peer_req->flags & (EE_TRIM | EE_ZEROOUT)) == 0)
 		list_add_tail(&peer_req->w.list, &device->active_ee);
 	spin_unlock_irq(&device->resource->req_lock);
 
@@ -5068,7 +5036,6 @@ static struct data_cmd drbd_cmd_handler[] = {
 	[P_TRIM]	    = { 0, sizeof(struct p_trim), receive_Data },
 	[P_ZEROES]	    = { 0, sizeof(struct p_trim), receive_Data },
 	[P_RS_DEALLOCATED]  = { 0, sizeof(struct p_block_desc), receive_rs_deallocated },
-	[P_WSAME]	    = { 1, sizeof(struct p_wsame), receive_Data },
 };
 
 static void drbdd(struct drbd_connection *connection)
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index c00ae8619519e..d46a3c450af26 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -36,7 +36,6 @@ static struct drbd_request *drbd_req_new(struct drbd_device *device, struct bio
 	req->private_bio->bi_end_io = drbd_request_endio;
 
 	req->rq_state = (bio_data_dir(bio_src) == WRITE ? RQ_WRITE : 0)
-		      | (bio_op(bio_src) == REQ_OP_WRITE_SAME ? RQ_WSAME : 0)
 		      | (bio_op(bio_src) == REQ_OP_WRITE_ZEROES ? RQ_ZEROES : 0)
 		      | (bio_op(bio_src) == REQ_OP_DISCARD ? RQ_UNMAP : 0);
 	req->device = device;
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index a5e04b38006b6..76af6c249df37 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -329,11 +329,6 @@ void drbd_csum_bio(struct crypto_shash *tfm, struct bio *bio, void *digest)
 		src = kmap_atomic(bvec.bv_page);
 		crypto_shash_update(desc, src + bvec.bv_offset, bvec.bv_len);
 		kunmap_atomic(src);
-
-		/* REQ_OP_WRITE_SAME has only one segment,
-		 * checksum the payload only once. */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	crypto_shash_final(desc, digest);
 	shash_desc_zero(desc);
-- 
2.30.2

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[Drbd-dev] [PATCH 2/7] drbd: drop REQ_OP_WRITE_SAME support

[Christoph Hellwig]

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
code, which has switched to use REQ_OP_WRITE_ZEROES long ago.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/drbd/drbd_main.c     | 31 ++-----------
 drivers/block/drbd/drbd_nl.c       | 72 +-----------------------------
 drivers/block/drbd/drbd_receiver.c | 47 +++----------------
 drivers/block/drbd/drbd_req.c      |  1 -
 drivers/block/drbd/drbd_worker.c   |  5 ---
 5 files changed, 13 insertions(+), 143 deletions(-)

diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 6f450816c4fa6..96881d5babd9e 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -912,7 +912,7 @@ assign_p_sizes_qlim(struct drbd_device *device, struct p_sizes *p,
 		p->qlim->io_min = cpu_to_be32(queue_io_min(q));
 		p->qlim->io_opt = cpu_to_be32(queue_io_opt(q));
 		p->qlim->discard_enabled = blk_queue_discard(q);
-		p->qlim->write_same_capable = !!q->limits.max_write_same_sectors;
+		p->qlim->write_same_capable = 0;
 	} else {
 		q = device->rq_queue;
 		p->qlim->physical_block_size = cpu_to_be32(queue_physical_block_size(q));
@@ -1591,9 +1591,6 @@ static int _drbd_send_bio(struct drbd_peer_device *peer_device, struct bio *bio)
 					 ? 0 : MSG_MORE);
 		if (err)
 			return err;
-		/* REQ_OP_WRITE_SAME has only one segment */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	return 0;
 }
@@ -1612,9 +1609,6 @@ static int _drbd_send_zc_bio(struct drbd_peer_device *peer_device, struct bio *b
 				      bio_iter_last(bvec, iter) ? 0 : MSG_MORE);
 		if (err)
 			return err;
-		/* REQ_OP_WRITE_SAME has only one segment */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	return 0;
 }
@@ -1646,7 +1640,6 @@ static u32 bio_flags_to_wire(struct drbd_connection *connection,
 		return  (bio->bi_opf & REQ_SYNC ? DP_RW_SYNC : 0) |
 			(bio->bi_opf & REQ_FUA ? DP_FUA : 0) |
 			(bio->bi_opf & REQ_PREFLUSH ? DP_FLUSH : 0) |
-			(bio_op(bio) == REQ_OP_WRITE_SAME ? DP_WSAME : 0) |
 			(bio_op(bio) == REQ_OP_DISCARD ? DP_DISCARD : 0) |
 			(bio_op(bio) == REQ_OP_WRITE_ZEROES ?
 			  ((connection->agreed_features & DRBD_FF_WZEROES) ?
@@ -1665,7 +1658,6 @@ int drbd_send_dblock(struct drbd_peer_device *peer_device, struct drbd_request *
 	struct drbd_device *device = peer_device->device;
 	struct drbd_socket *sock;
 	struct p_data *p;
-	struct p_wsame *wsame = NULL;
 	void *digest_out;
 	unsigned int dp_flags = 0;
 	int digest_size;
@@ -1703,29 +1695,14 @@ int drbd_send_dblock(struct drbd_peer_device *peer_device, struct drbd_request *
 		err = __send_command(peer_device->connection, device->vnr, sock, cmd, sizeof(*t), NULL, 0);
 		goto out;
 	}
-	if (dp_flags & DP_WSAME) {
-		/* this will only work if DRBD_FF_WSAME is set AND the
-		 * handshake agreed that all nodes and backend devices are
-		 * WRITE_SAME capable and agree on logical_block_size */
-		wsame = (struct p_wsame*)p;
-		digest_out = wsame + 1;
-		wsame->size = cpu_to_be32(req->i.size);
-	} else
-		digest_out = p + 1;
+	digest_out = p + 1;
 
 	/* our digest is still only over the payload.
 	 * TRIM does not carry any payload. */
 	if (digest_size)
 		drbd_csum_bio(peer_device->connection->integrity_tfm, req->master_bio, digest_out);
-	if (wsame) {
-		err =
-		    __send_command(peer_device->connection, device->vnr, sock, P_WSAME,
-				   sizeof(*wsame) + digest_size, NULL,
-				   bio_iovec(req->master_bio).bv_len);
-	} else
-		err =
-		    __send_command(peer_device->connection, device->vnr, sock, P_DATA,
-				   sizeof(*p) + digest_size, NULL, req->i.size);
+	err = __send_command(peer_device->connection, device->vnr, sock, P_DATA,
+			     sizeof(*p) + digest_size, NULL, req->i.size);
 	if (!err) {
 		/* For protocol A, we have to memcpy the payload into
 		 * socket buffers, as we may complete right away
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 44ccf8b4f4b29..02030c9c4d3b1 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1265,71 +1265,6 @@ static void fixup_write_zeroes(struct drbd_device *device, struct request_queue
 		q->limits.max_write_zeroes_sectors = 0;
 }
 
-static void decide_on_write_same_support(struct drbd_device *device,
-			struct request_queue *q,
-			struct request_queue *b, struct o_qlim *o,
-			bool disable_write_same)
-{
-	struct drbd_peer_device *peer_device = first_peer_device(device);
-	struct drbd_connection *connection = peer_device->connection;
-	bool can_do = b ? b->limits.max_write_same_sectors : true;
-
-	if (can_do && disable_write_same) {
-		can_do = false;
-		drbd_info(peer_device, "WRITE_SAME disabled by config\n");
-	}
-
-	if (can_do && connection->cstate >= C_CONNECTED && !(connection->agreed_features & DRBD_FF_WSAME)) {
-		can_do = false;
-		drbd_info(peer_device, "peer does not support WRITE_SAME\n");
-	}
-
-	if (o) {
-		/* logical block size; queue_logical_block_size(NULL) is 512 */
-		unsigned int peer_lbs = be32_to_cpu(o->logical_block_size);
-		unsigned int me_lbs_b = queue_logical_block_size(b);
-		unsigned int me_lbs = queue_logical_block_size(q);
-
-		if (me_lbs_b != me_lbs) {
-			drbd_warn(device,
-				"logical block size of local backend does not match (drbd:%u, backend:%u); was this a late attach?\n",
-				me_lbs, me_lbs_b);
-			/* rather disable write same than trigger some BUG_ON later in the scsi layer. */
-			can_do = false;
-		}
-		if (me_lbs_b != peer_lbs) {
-			drbd_warn(peer_device, "logical block sizes do not match (me:%u, peer:%u); this may cause problems.\n",
-				me_lbs, peer_lbs);
-			if (can_do) {
-				drbd_dbg(peer_device, "logical block size mismatch: WRITE_SAME disabled.\n");
-				can_do = false;
-			}
-			me_lbs = max(me_lbs, me_lbs_b);
-			/* We cannot change the logical block size of an in-use queue.
-			 * We can only hope that access happens to be properly aligned.
-			 * If not, the peer will likely produce an IO error, and detach. */
-			if (peer_lbs > me_lbs) {
-				if (device->state.role != R_PRIMARY) {
-					blk_queue_logical_block_size(q, peer_lbs);
-					drbd_warn(peer_device, "logical block size set to %u\n", peer_lbs);
-				} else {
-					drbd_warn(peer_device,
-						"current Primary must NOT adjust logical block size (%u -> %u); hope for the best.\n",
-						me_lbs, peer_lbs);
-				}
-			}
-		}
-		if (can_do && !o->write_same_capable) {
-			/* If we introduce an open-coded write-same loop on the receiving side,
-			 * the peer would present itself as "capable". */
-			drbd_dbg(peer_device, "WRITE_SAME disabled (peer device not capable)\n");
-			can_do = false;
-		}
-	}
-
-	blk_queue_max_write_same_sectors(q, can_do ? DRBD_MAX_BBIO_SECTORS : 0);
-}
-
 static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backing_dev *bdev,
 				   unsigned int max_bio_size, struct o_qlim *o)
 {
@@ -1339,7 +1274,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 	struct request_queue *b = NULL;
 	struct disk_conf *dc;
 	bool discard_zeroes_if_aligned = true;
-	bool disable_write_same = false;
 
 	if (bdev) {
 		b = bdev->backing_bdev->bd_disk->queue;
@@ -1349,7 +1283,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 		dc = rcu_dereference(device->ldev->disk_conf);
 		max_segments = dc->max_bio_bvecs;
 		discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned;
-		disable_write_same = dc->disable_write_same;
 		rcu_read_unlock();
 
 		blk_set_stacking_limits(&q->limits);
@@ -1360,7 +1293,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 	blk_queue_max_segments(q, max_segments ? max_segments : BLK_MAX_SEGMENTS);
 	blk_queue_segment_boundary(q, PAGE_SIZE-1);
 	decide_on_discard_support(device, q, b, discard_zeroes_if_aligned);
-	decide_on_write_same_support(device, q, b, o, disable_write_same);
 
 	if (b) {
 		blk_stack_limits(&q->limits, &b->limits, 0);
@@ -1666,8 +1598,8 @@ int drbd_adm_disk_opts(struct sk_buff *skb, struct genl_info *info)
 	if (write_ordering_changed(old_disk_conf, new_disk_conf))
 		drbd_bump_write_ordering(device->resource, NULL, WO_BDEV_FLUSH);
 
-	if (old_disk_conf->discard_zeroes_if_aligned != new_disk_conf->discard_zeroes_if_aligned
-	||  old_disk_conf->disable_write_same != new_disk_conf->disable_write_same)
+	if (old_disk_conf->discard_zeroes_if_aligned !=
+	    new_disk_conf->discard_zeroes_if_aligned)
 		drbd_reconsider_queue_parameters(device, device->ldev, NULL);
 
 	drbd_md_sync(device);
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 04e3ec12d8b49..46e2ec0bd2f98 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1604,19 +1604,7 @@ static void drbd_issue_peer_discard_or_zero_out(struct drbd_device *device, stru
 	drbd_endio_write_sec_final(peer_req);
 }
 
-static void drbd_issue_peer_wsame(struct drbd_device *device,
-				  struct drbd_peer_request *peer_req)
-{
-	struct block_device *bdev = device->ldev->backing_bdev;
-	sector_t s = peer_req->i.sector;
-	sector_t nr = peer_req->i.size >> 9;
-	if (blkdev_issue_write_same(bdev, s, nr, GFP_NOIO, peer_req->pages))
-		peer_req->flags |= EE_WAS_ERROR;
-	drbd_endio_write_sec_final(peer_req);
-}
-
-
-/*
+/**
  * drbd_submit_peer_request()
  * @device:	DRBD device.
  * @peer_req:	peer request
@@ -1651,7 +1639,7 @@ int drbd_submit_peer_request(struct drbd_device *device,
 	 * Correctness first, performance later.  Next step is to code an
 	 * asynchronous variant of the same.
 	 */
-	if (peer_req->flags & (EE_TRIM|EE_WRITE_SAME|EE_ZEROOUT)) {
+	if (peer_req->flags & (EE_TRIM | EE_ZEROOUT)) {
 		/* wait for all pending IO completions, before we start
 		 * zeroing things out. */
 		conn_wait_active_ee_empty(peer_req->peer_device->connection);
@@ -1668,10 +1656,7 @@ int drbd_submit_peer_request(struct drbd_device *device,
 			spin_unlock_irq(&device->resource->req_lock);
 		}
 
-		if (peer_req->flags & (EE_TRIM|EE_ZEROOUT))
-			drbd_issue_peer_discard_or_zero_out(device, peer_req);
-		else /* EE_WRITE_SAME */
-			drbd_issue_peer_wsame(device, peer_req);
+		drbd_issue_peer_discard_or_zero_out(device, peer_req);
 		return 0;
 	}
 
@@ -1854,7 +1839,6 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 	unsigned long *data;
 	struct p_trim *trim = (pi->cmd == P_TRIM) ? pi->data : NULL;
 	struct p_trim *zeroes = (pi->cmd == P_ZEROES) ? pi->data : NULL;
-	struct p_trim *wsame = (pi->cmd == P_WSAME) ? pi->data : NULL;
 
 	digest_size = 0;
 	if (!trim && peer_device->connection->peer_integrity_tfm) {
@@ -1869,7 +1853,7 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		data_size -= digest_size;
 	}
 
-	/* assume request_size == data_size, but special case trim and wsame. */
+	/* assume request_size == data_size, but special case trim. */
 	ds = data_size;
 	if (trim) {
 		if (!expect(data_size == 0))
@@ -1879,23 +1863,11 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		if (!expect(data_size == 0))
 			return NULL;
 		ds = be32_to_cpu(zeroes->size);
-	} else if (wsame) {
-		if (data_size != queue_logical_block_size(device->rq_queue)) {
-			drbd_err(peer_device, "data size (%u) != drbd logical block size (%u)\n",
-				data_size, queue_logical_block_size(device->rq_queue));
-			return NULL;
-		}
-		if (data_size != bdev_logical_block_size(device->ldev->backing_bdev)) {
-			drbd_err(peer_device, "data size (%u) != backend logical block size (%u)\n",
-				data_size, bdev_logical_block_size(device->ldev->backing_bdev));
-			return NULL;
-		}
-		ds = be32_to_cpu(wsame->size);
 	}
 
 	if (!expect(IS_ALIGNED(ds, 512)))
 		return NULL;
-	if (trim || wsame || zeroes) {
+	if (trim || zeroes) {
 		if (!expect(ds <= (DRBD_MAX_BBIO_SECTORS << 9)))
 			return NULL;
 	} else if (!expect(ds <= DRBD_MAX_BIO_SIZE))
@@ -1927,8 +1899,6 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		peer_req->flags |= EE_ZEROOUT;
 		return peer_req;
 	}
-	if (wsame)
-		peer_req->flags |= EE_WRITE_SAME;
 
 	/* receive payload size bytes into page chain */
 	ds = data_size;
@@ -2427,8 +2397,6 @@ static unsigned long wire_flags_to_bio_op(u32 dpf)
 		return REQ_OP_WRITE_ZEROES;
 	if (dpf & DP_DISCARD)
 		return REQ_OP_DISCARD;
-	if (dpf & DP_WSAME)
-		return REQ_OP_WRITE_SAME;
 	else
 		return REQ_OP_WRITE;
 }
@@ -2695,11 +2663,11 @@ static int receive_Data(struct drbd_connection *connection, struct packet_info *
 		update_peer_seq(peer_device, peer_seq);
 		spin_lock_irq(&device->resource->req_lock);
 	}
-	/* TRIM and WRITE_SAME are processed synchronously,
+	/* TRIM and is processed synchronously,
 	 * we wait for all pending requests, respectively wait for
 	 * active_ee to become empty in drbd_submit_peer_request();
 	 * better not add ourselves here. */
-	if ((peer_req->flags & (EE_TRIM|EE_WRITE_SAME|EE_ZEROOUT)) == 0)
+	if ((peer_req->flags & (EE_TRIM | EE_ZEROOUT)) == 0)
 		list_add_tail(&peer_req->w.list, &device->active_ee);
 	spin_unlock_irq(&device->resource->req_lock);
 
@@ -5068,7 +5036,6 @@ static struct data_cmd drbd_cmd_handler[] = {
 	[P_TRIM]	    = { 0, sizeof(struct p_trim), receive_Data },
 	[P_ZEROES]	    = { 0, sizeof(struct p_trim), receive_Data },
 	[P_RS_DEALLOCATED]  = { 0, sizeof(struct p_block_desc), receive_rs_deallocated },
-	[P_WSAME]	    = { 1, sizeof(struct p_wsame), receive_Data },
 };
 
 static void drbdd(struct drbd_connection *connection)
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index c00ae8619519e..d46a3c450af26 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -36,7 +36,6 @@ static struct drbd_request *drbd_req_new(struct drbd_device *device, struct bio
 	req->private_bio->bi_end_io = drbd_request_endio;
 
 	req->rq_state = (bio_data_dir(bio_src) == WRITE ? RQ_WRITE : 0)
-		      | (bio_op(bio_src) == REQ_OP_WRITE_SAME ? RQ_WSAME : 0)
 		      | (bio_op(bio_src) == REQ_OP_WRITE_ZEROES ? RQ_ZEROES : 0)
 		      | (bio_op(bio_src) == REQ_OP_DISCARD ? RQ_UNMAP : 0);
 	req->device = device;
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index a5e04b38006b6..76af6c249df37 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -329,11 +329,6 @@ void drbd_csum_bio(struct crypto_shash *tfm, struct bio *bio, void *digest)
 		src = kmap_atomic(bvec.bv_page);
 		crypto_shash_update(desc, src + bvec.bv_offset, bvec.bv_len);
 		kunmap_atomic(src);
-
-		/* REQ_OP_WRITE_SAME has only one segment,
-		 * checksum the payload only once. */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	crypto_shash_final(desc, digest);
 	shash_desc_zero(desc);
-- 
2.30.2

[PATCH 2/7] drbd: drop REQ_OP_WRITE_SAME support

[Christoph Hellwig]

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
code, which has switched to use REQ_OP_WRITE_ZEROES long ago.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/drbd/drbd_main.c     | 31 ++-----------
 drivers/block/drbd/drbd_nl.c       | 72 +-----------------------------
 drivers/block/drbd/drbd_receiver.c | 47 +++----------------
 drivers/block/drbd/drbd_req.c      |  1 -
 drivers/block/drbd/drbd_worker.c   |  5 ---
 5 files changed, 13 insertions(+), 143 deletions(-)

diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 6f450816c4fa6..96881d5babd9e 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -912,7 +912,7 @@ assign_p_sizes_qlim(struct drbd_device *device, struct p_sizes *p,
 		p->qlim->io_min = cpu_to_be32(queue_io_min(q));
 		p->qlim->io_opt = cpu_to_be32(queue_io_opt(q));
 		p->qlim->discard_enabled = blk_queue_discard(q);
-		p->qlim->write_same_capable = !!q->limits.max_write_same_sectors;
+		p->qlim->write_same_capable = 0;
 	} else {
 		q = device->rq_queue;
 		p->qlim->physical_block_size = cpu_to_be32(queue_physical_block_size(q));
@@ -1591,9 +1591,6 @@ static int _drbd_send_bio(struct drbd_peer_device *peer_device, struct bio *bio)
 					 ? 0 : MSG_MORE);
 		if (err)
 			return err;
-		/* REQ_OP_WRITE_SAME has only one segment */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	return 0;
 }
@@ -1612,9 +1609,6 @@ static int _drbd_send_zc_bio(struct drbd_peer_device *peer_device, struct bio *b
 				      bio_iter_last(bvec, iter) ? 0 : MSG_MORE);
 		if (err)
 			return err;
-		/* REQ_OP_WRITE_SAME has only one segment */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	return 0;
 }
@@ -1646,7 +1640,6 @@ static u32 bio_flags_to_wire(struct drbd_connection *connection,
 		return  (bio->bi_opf & REQ_SYNC ? DP_RW_SYNC : 0) |
 			(bio->bi_opf & REQ_FUA ? DP_FUA : 0) |
 			(bio->bi_opf & REQ_PREFLUSH ? DP_FLUSH : 0) |
-			(bio_op(bio) == REQ_OP_WRITE_SAME ? DP_WSAME : 0) |
 			(bio_op(bio) == REQ_OP_DISCARD ? DP_DISCARD : 0) |
 			(bio_op(bio) == REQ_OP_WRITE_ZEROES ?
 			  ((connection->agreed_features & DRBD_FF_WZEROES) ?
@@ -1665,7 +1658,6 @@ int drbd_send_dblock(struct drbd_peer_device *peer_device, struct drbd_request *
 	struct drbd_device *device = peer_device->device;
 	struct drbd_socket *sock;
 	struct p_data *p;
-	struct p_wsame *wsame = NULL;
 	void *digest_out;
 	unsigned int dp_flags = 0;
 	int digest_size;
@@ -1703,29 +1695,14 @@ int drbd_send_dblock(struct drbd_peer_device *peer_device, struct drbd_request *
 		err = __send_command(peer_device->connection, device->vnr, sock, cmd, sizeof(*t), NULL, 0);
 		goto out;
 	}
-	if (dp_flags & DP_WSAME) {
-		/* this will only work if DRBD_FF_WSAME is set AND the
-		 * handshake agreed that all nodes and backend devices are
-		 * WRITE_SAME capable and agree on logical_block_size */
-		wsame = (struct p_wsame*)p;
-		digest_out = wsame + 1;
-		wsame->size = cpu_to_be32(req->i.size);
-	} else
-		digest_out = p + 1;
+	digest_out = p + 1;
 
 	/* our digest is still only over the payload.
 	 * TRIM does not carry any payload. */
 	if (digest_size)
 		drbd_csum_bio(peer_device->connection->integrity_tfm, req->master_bio, digest_out);
-	if (wsame) {
-		err =
-		    __send_command(peer_device->connection, device->vnr, sock, P_WSAME,
-				   sizeof(*wsame) + digest_size, NULL,
-				   bio_iovec(req->master_bio).bv_len);
-	} else
-		err =
-		    __send_command(peer_device->connection, device->vnr, sock, P_DATA,
-				   sizeof(*p) + digest_size, NULL, req->i.size);
+	err = __send_command(peer_device->connection, device->vnr, sock, P_DATA,
+			     sizeof(*p) + digest_size, NULL, req->i.size);
 	if (!err) {
 		/* For protocol A, we have to memcpy the payload into
 		 * socket buffers, as we may complete right away
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 44ccf8b4f4b29..02030c9c4d3b1 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -1265,71 +1265,6 @@ static void fixup_write_zeroes(struct drbd_device *device, struct request_queue
 		q->limits.max_write_zeroes_sectors = 0;
 }
 
-static void decide_on_write_same_support(struct drbd_device *device,
-			struct request_queue *q,
-			struct request_queue *b, struct o_qlim *o,
-			bool disable_write_same)
-{
-	struct drbd_peer_device *peer_device = first_peer_device(device);
-	struct drbd_connection *connection = peer_device->connection;
-	bool can_do = b ? b->limits.max_write_same_sectors : true;
-
-	if (can_do && disable_write_same) {
-		can_do = false;
-		drbd_info(peer_device, "WRITE_SAME disabled by config\n");
-	}
-
-	if (can_do && connection->cstate >= C_CONNECTED && !(connection->agreed_features & DRBD_FF_WSAME)) {
-		can_do = false;
-		drbd_info(peer_device, "peer does not support WRITE_SAME\n");
-	}
-
-	if (o) {
-		/* logical block size; queue_logical_block_size(NULL) is 512 */
-		unsigned int peer_lbs = be32_to_cpu(o->logical_block_size);
-		unsigned int me_lbs_b = queue_logical_block_size(b);
-		unsigned int me_lbs = queue_logical_block_size(q);
-
-		if (me_lbs_b != me_lbs) {
-			drbd_warn(device,
-				"logical block size of local backend does not match (drbd:%u, backend:%u); was this a late attach?\n",
-				me_lbs, me_lbs_b);
-			/* rather disable write same than trigger some BUG_ON later in the scsi layer. */
-			can_do = false;
-		}
-		if (me_lbs_b != peer_lbs) {
-			drbd_warn(peer_device, "logical block sizes do not match (me:%u, peer:%u); this may cause problems.\n",
-				me_lbs, peer_lbs);
-			if (can_do) {
-				drbd_dbg(peer_device, "logical block size mismatch: WRITE_SAME disabled.\n");
-				can_do = false;
-			}
-			me_lbs = max(me_lbs, me_lbs_b);
-			/* We cannot change the logical block size of an in-use queue.
-			 * We can only hope that access happens to be properly aligned.
-			 * If not, the peer will likely produce an IO error, and detach. */
-			if (peer_lbs > me_lbs) {
-				if (device->state.role != R_PRIMARY) {
-					blk_queue_logical_block_size(q, peer_lbs);
-					drbd_warn(peer_device, "logical block size set to %u\n", peer_lbs);
-				} else {
-					drbd_warn(peer_device,
-						"current Primary must NOT adjust logical block size (%u -> %u); hope for the best.\n",
-						me_lbs, peer_lbs);
-				}
-			}
-		}
-		if (can_do && !o->write_same_capable) {
-			/* If we introduce an open-coded write-same loop on the receiving side,
-			 * the peer would present itself as "capable". */
-			drbd_dbg(peer_device, "WRITE_SAME disabled (peer device not capable)\n");
-			can_do = false;
-		}
-	}
-
-	blk_queue_max_write_same_sectors(q, can_do ? DRBD_MAX_BBIO_SECTORS : 0);
-}
-
 static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backing_dev *bdev,
 				   unsigned int max_bio_size, struct o_qlim *o)
 {
@@ -1339,7 +1274,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 	struct request_queue *b = NULL;
 	struct disk_conf *dc;
 	bool discard_zeroes_if_aligned = true;
-	bool disable_write_same = false;
 
 	if (bdev) {
 		b = bdev->backing_bdev->bd_disk->queue;
@@ -1349,7 +1283,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 		dc = rcu_dereference(device->ldev->disk_conf);
 		max_segments = dc->max_bio_bvecs;
 		discard_zeroes_if_aligned = dc->discard_zeroes_if_aligned;
-		disable_write_same = dc->disable_write_same;
 		rcu_read_unlock();
 
 		blk_set_stacking_limits(&q->limits);
@@ -1360,7 +1293,6 @@ static void drbd_setup_queue_param(struct drbd_device *device, struct drbd_backi
 	blk_queue_max_segments(q, max_segments ? max_segments : BLK_MAX_SEGMENTS);
 	blk_queue_segment_boundary(q, PAGE_SIZE-1);
 	decide_on_discard_support(device, q, b, discard_zeroes_if_aligned);
-	decide_on_write_same_support(device, q, b, o, disable_write_same);
 
 	if (b) {
 		blk_stack_limits(&q->limits, &b->limits, 0);
@@ -1666,8 +1598,8 @@ int drbd_adm_disk_opts(struct sk_buff *skb, struct genl_info *info)
 	if (write_ordering_changed(old_disk_conf, new_disk_conf))
 		drbd_bump_write_ordering(device->resource, NULL, WO_BDEV_FLUSH);
 
-	if (old_disk_conf->discard_zeroes_if_aligned != new_disk_conf->discard_zeroes_if_aligned
-	||  old_disk_conf->disable_write_same != new_disk_conf->disable_write_same)
+	if (old_disk_conf->discard_zeroes_if_aligned !=
+	    new_disk_conf->discard_zeroes_if_aligned)
 		drbd_reconsider_queue_parameters(device, device->ldev, NULL);
 
 	drbd_md_sync(device);
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index 04e3ec12d8b49..46e2ec0bd2f98 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -1604,19 +1604,7 @@ static void drbd_issue_peer_discard_or_zero_out(struct drbd_device *device, stru
 	drbd_endio_write_sec_final(peer_req);
 }
 
-static void drbd_issue_peer_wsame(struct drbd_device *device,
-				  struct drbd_peer_request *peer_req)
-{
-	struct block_device *bdev = device->ldev->backing_bdev;
-	sector_t s = peer_req->i.sector;
-	sector_t nr = peer_req->i.size >> 9;
-	if (blkdev_issue_write_same(bdev, s, nr, GFP_NOIO, peer_req->pages))
-		peer_req->flags |= EE_WAS_ERROR;
-	drbd_endio_write_sec_final(peer_req);
-}
-
-
-/*
+/**
  * drbd_submit_peer_request()
  * @device:	DRBD device.
  * @peer_req:	peer request
@@ -1651,7 +1639,7 @@ int drbd_submit_peer_request(struct drbd_device *device,
 	 * Correctness first, performance later.  Next step is to code an
 	 * asynchronous variant of the same.
 	 */
-	if (peer_req->flags & (EE_TRIM|EE_WRITE_SAME|EE_ZEROOUT)) {
+	if (peer_req->flags & (EE_TRIM | EE_ZEROOUT)) {
 		/* wait for all pending IO completions, before we start
 		 * zeroing things out. */
 		conn_wait_active_ee_empty(peer_req->peer_device->connection);
@@ -1668,10 +1656,7 @@ int drbd_submit_peer_request(struct drbd_device *device,
 			spin_unlock_irq(&device->resource->req_lock);
 		}
 
-		if (peer_req->flags & (EE_TRIM|EE_ZEROOUT))
-			drbd_issue_peer_discard_or_zero_out(device, peer_req);
-		else /* EE_WRITE_SAME */
-			drbd_issue_peer_wsame(device, peer_req);
+		drbd_issue_peer_discard_or_zero_out(device, peer_req);
 		return 0;
 	}
 
@@ -1854,7 +1839,6 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 	unsigned long *data;
 	struct p_trim *trim = (pi->cmd == P_TRIM) ? pi->data : NULL;
 	struct p_trim *zeroes = (pi->cmd == P_ZEROES) ? pi->data : NULL;
-	struct p_trim *wsame = (pi->cmd == P_WSAME) ? pi->data : NULL;
 
 	digest_size = 0;
 	if (!trim && peer_device->connection->peer_integrity_tfm) {
@@ -1869,7 +1853,7 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		data_size -= digest_size;
 	}
 
-	/* assume request_size == data_size, but special case trim and wsame. */
+	/* assume request_size == data_size, but special case trim. */
 	ds = data_size;
 	if (trim) {
 		if (!expect(data_size == 0))
@@ -1879,23 +1863,11 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		if (!expect(data_size == 0))
 			return NULL;
 		ds = be32_to_cpu(zeroes->size);
-	} else if (wsame) {
-		if (data_size != queue_logical_block_size(device->rq_queue)) {
-			drbd_err(peer_device, "data size (%u) != drbd logical block size (%u)\n",
-				data_size, queue_logical_block_size(device->rq_queue));
-			return NULL;
-		}
-		if (data_size != bdev_logical_block_size(device->ldev->backing_bdev)) {
-			drbd_err(peer_device, "data size (%u) != backend logical block size (%u)\n",
-				data_size, bdev_logical_block_size(device->ldev->backing_bdev));
-			return NULL;
-		}
-		ds = be32_to_cpu(wsame->size);
 	}
 
 	if (!expect(IS_ALIGNED(ds, 512)))
 		return NULL;
-	if (trim || wsame || zeroes) {
+	if (trim || zeroes) {
 		if (!expect(ds <= (DRBD_MAX_BBIO_SECTORS << 9)))
 			return NULL;
 	} else if (!expect(ds <= DRBD_MAX_BIO_SIZE))
@@ -1927,8 +1899,6 @@ read_in_block(struct drbd_peer_device *peer_device, u64 id, sector_t sector,
 		peer_req->flags |= EE_ZEROOUT;
 		return peer_req;
 	}
-	if (wsame)
-		peer_req->flags |= EE_WRITE_SAME;
 
 	/* receive payload size bytes into page chain */
 	ds = data_size;
@@ -2427,8 +2397,6 @@ static unsigned long wire_flags_to_bio_op(u32 dpf)
 		return REQ_OP_WRITE_ZEROES;
 	if (dpf & DP_DISCARD)
 		return REQ_OP_DISCARD;
-	if (dpf & DP_WSAME)
-		return REQ_OP_WRITE_SAME;
 	else
 		return REQ_OP_WRITE;
 }
@@ -2695,11 +2663,11 @@ static int receive_Data(struct drbd_connection *connection, struct packet_info *
 		update_peer_seq(peer_device, peer_seq);
 		spin_lock_irq(&device->resource->req_lock);
 	}
-	/* TRIM and WRITE_SAME are processed synchronously,
+	/* TRIM and is processed synchronously,
 	 * we wait for all pending requests, respectively wait for
 	 * active_ee to become empty in drbd_submit_peer_request();
 	 * better not add ourselves here. */
-	if ((peer_req->flags & (EE_TRIM|EE_WRITE_SAME|EE_ZEROOUT)) == 0)
+	if ((peer_req->flags & (EE_TRIM | EE_ZEROOUT)) == 0)
 		list_add_tail(&peer_req->w.list, &device->active_ee);
 	spin_unlock_irq(&device->resource->req_lock);
 
@@ -5068,7 +5036,6 @@ static struct data_cmd drbd_cmd_handler[] = {
 	[P_TRIM]	    = { 0, sizeof(struct p_trim), receive_Data },
 	[P_ZEROES]	    = { 0, sizeof(struct p_trim), receive_Data },
 	[P_RS_DEALLOCATED]  = { 0, sizeof(struct p_block_desc), receive_rs_deallocated },
-	[P_WSAME]	    = { 1, sizeof(struct p_wsame), receive_Data },
 };
 
 static void drbdd(struct drbd_connection *connection)
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index c00ae8619519e..d46a3c450af26 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -36,7 +36,6 @@ static struct drbd_request *drbd_req_new(struct drbd_device *device, struct bio
 	req->private_bio->bi_end_io = drbd_request_endio;
 
 	req->rq_state = (bio_data_dir(bio_src) == WRITE ? RQ_WRITE : 0)
-		      | (bio_op(bio_src) == REQ_OP_WRITE_SAME ? RQ_WSAME : 0)
 		      | (bio_op(bio_src) == REQ_OP_WRITE_ZEROES ? RQ_ZEROES : 0)
 		      | (bio_op(bio_src) == REQ_OP_DISCARD ? RQ_UNMAP : 0);
 	req->device = device;
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index a5e04b38006b6..76af6c249df37 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -329,11 +329,6 @@ void drbd_csum_bio(struct crypto_shash *tfm, struct bio *bio, void *digest)
 		src = kmap_atomic(bvec.bv_page);
 		crypto_shash_update(desc, src + bvec.bv_offset, bvec.bv_len);
 		kunmap_atomic(src);
-
-		/* REQ_OP_WRITE_SAME has only one segment,
-		 * checksum the payload only once. */
-		if (bio_op(bio) == REQ_OP_WRITE_SAME)
-			break;
 	}
 	crypto_shash_final(desc, digest);
 	shash_desc_zero(desc);
-- 
2.30.2

[dm-devel] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Christoph Hellwig]

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
even merged.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
 drivers/block/rnbd/rnbd-clt.h   | 1 -
 drivers/block/rnbd/rnbd-proto.h | 6 ------
 drivers/block/rnbd/rnbd-srv.c   | 3 +--
 4 files changed, 3 insertions(+), 14 deletions(-)

diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
index c08971de369fc..dc192d2738854 100644
--- a/drivers/block/rnbd/rnbd-clt.c
+++ b/drivers/block/rnbd/rnbd-clt.c
@@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
 	dev->nsectors		    = le64_to_cpu(rsp->nsectors);
 	dev->logical_block_size	    = le16_to_cpu(rsp->logical_block_size);
 	dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
-	dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
 	dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
 	dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
 	dev->discard_alignment	    = le32_to_cpu(rsp->discard_alignment);
@@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
 	blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
 	blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
 	blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
-	blk_queue_max_write_same_sectors(dev->queue,
-					 dev->max_write_same_sectors);
 
 	/*
 	 * we don't support discards to "discontiguous" segments
@@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
 	}
 
 	rnbd_clt_info(dev,
-		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
+		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
 		       dev->gd->disk_name, dev->nsectors,
 		       dev->logical_block_size, dev->physical_block_size,
-		       dev->max_write_same_sectors, dev->max_discard_sectors,
+		       dev->max_discard_sectors,
 		       dev->discard_granularity, dev->discard_alignment,
 		       dev->secure_discard, dev->max_segments,
 		       dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
index 0c2cae7f39b9f..6946ba23d62e5 100644
--- a/drivers/block/rnbd/rnbd-clt.h
+++ b/drivers/block/rnbd/rnbd-clt.h
@@ -122,7 +122,6 @@ struct rnbd_clt_dev {
 	bool			wc;
 	bool			fua;
 	u32			max_hw_sectors;
-	u32			max_write_same_sectors;
 	u32			max_discard_sectors;
 	u32			discard_granularity;
 	u32			discard_alignment;
diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
index de5d5a8df81d7..3eb8b34bd1886 100644
--- a/drivers/block/rnbd/rnbd-proto.h
+++ b/drivers/block/rnbd/rnbd-proto.h
@@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
 	case RNBD_OP_SECURE_ERASE:
 		bio_opf = REQ_OP_SECURE_ERASE;
 		break;
-	case RNBD_OP_WRITE_SAME:
-		bio_opf = REQ_OP_WRITE_SAME;
-		break;
 	default:
 		WARN(1, "Unknown RNBD type: %d (flags %d)\n",
 		     rnbd_op(rnbd_opf), rnbd_opf);
@@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
 	case REQ_OP_SECURE_ERASE:
 		rnbd_opf = RNBD_OP_SECURE_ERASE;
 		break;
-	case REQ_OP_WRITE_SAME:
-		rnbd_opf = RNBD_OP_WRITE_SAME;
-		break;
 	case REQ_OP_FLUSH:
 		rnbd_opf = RNBD_OP_FLUSH;
 		break;
diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
index 132e950685d59..0e6b5687f8321 100644
--- a/drivers/block/rnbd/rnbd-srv.c
+++ b/drivers/block/rnbd/rnbd-srv.c
@@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
 		cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
 	rsp->max_hw_sectors =
 		cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
-	rsp->max_write_same_sectors =
-		cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
+	rsp->max_write_same_sectors = 0;
 	rsp->max_discard_sectors =
 		cpu_to_le32(rnbd_dev_get_max_discard_sects(rnbd_dev));
 	rsp->discard_granularity =
-- 
2.30.2

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[Drbd-dev] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Christoph Hellwig]

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
even merged.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
 drivers/block/rnbd/rnbd-clt.h   | 1 -
 drivers/block/rnbd/rnbd-proto.h | 6 ------
 drivers/block/rnbd/rnbd-srv.c   | 3 +--
 4 files changed, 3 insertions(+), 14 deletions(-)

diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
index c08971de369fc..dc192d2738854 100644
--- a/drivers/block/rnbd/rnbd-clt.c
+++ b/drivers/block/rnbd/rnbd-clt.c
@@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
 	dev->nsectors		    = le64_to_cpu(rsp->nsectors);
 	dev->logical_block_size	    = le16_to_cpu(rsp->logical_block_size);
 	dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
-	dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
 	dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
 	dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
 	dev->discard_alignment	    = le32_to_cpu(rsp->discard_alignment);
@@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
 	blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
 	blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
 	blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
-	blk_queue_max_write_same_sectors(dev->queue,
-					 dev->max_write_same_sectors);
 
 	/*
 	 * we don't support discards to "discontiguous" segments
@@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
 	}
 
 	rnbd_clt_info(dev,
-		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
+		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
 		       dev->gd->disk_name, dev->nsectors,
 		       dev->logical_block_size, dev->physical_block_size,
-		       dev->max_write_same_sectors, dev->max_discard_sectors,
+		       dev->max_discard_sectors,
 		       dev->discard_granularity, dev->discard_alignment,
 		       dev->secure_discard, dev->max_segments,
 		       dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
index 0c2cae7f39b9f..6946ba23d62e5 100644
--- a/drivers/block/rnbd/rnbd-clt.h
+++ b/drivers/block/rnbd/rnbd-clt.h
@@ -122,7 +122,6 @@ struct rnbd_clt_dev {
 	bool			wc;
 	bool			fua;
 	u32			max_hw_sectors;
-	u32			max_write_same_sectors;
 	u32			max_discard_sectors;
 	u32			discard_granularity;
 	u32			discard_alignment;
diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
index de5d5a8df81d7..3eb8b34bd1886 100644
--- a/drivers/block/rnbd/rnbd-proto.h
+++ b/drivers/block/rnbd/rnbd-proto.h
@@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
 	case RNBD_OP_SECURE_ERASE:
 		bio_opf = REQ_OP_SECURE_ERASE;
 		break;
-	case RNBD_OP_WRITE_SAME:
-		bio_opf = REQ_OP_WRITE_SAME;
-		break;
 	default:
 		WARN(1, "Unknown RNBD type: %d (flags %d)\n",
 		     rnbd_op(rnbd_opf), rnbd_opf);
@@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
 	case REQ_OP_SECURE_ERASE:
 		rnbd_opf = RNBD_OP_SECURE_ERASE;
 		break;
-	case REQ_OP_WRITE_SAME:
-		rnbd_opf = RNBD_OP_WRITE_SAME;
-		break;
 	case REQ_OP_FLUSH:
 		rnbd_opf = RNBD_OP_FLUSH;
 		break;
diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
index 132e950685d59..0e6b5687f8321 100644
--- a/drivers/block/rnbd/rnbd-srv.c
+++ b/drivers/block/rnbd/rnbd-srv.c
@@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
 		cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
 	rsp->max_hw_sectors =
 		cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
-	rsp->max_write_same_sectors =
-		cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
+	rsp->max_write_same_sectors = 0;
 	rsp->max_discard_sectors =
 		cpu_to_le32(rnbd_dev_get_max_discard_sects(rnbd_dev));
 	rsp->discard_granularity =
-- 
2.30.2

[PATCH 3/7] rnbd: drop WRITE_SAME support

[Christoph Hellwig]

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
even merged.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
 drivers/block/rnbd/rnbd-clt.h   | 1 -
 drivers/block/rnbd/rnbd-proto.h | 6 ------
 drivers/block/rnbd/rnbd-srv.c   | 3 +--
 4 files changed, 3 insertions(+), 14 deletions(-)

diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
index c08971de369fc..dc192d2738854 100644
--- a/drivers/block/rnbd/rnbd-clt.c
+++ b/drivers/block/rnbd/rnbd-clt.c
@@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
 	dev->nsectors		    = le64_to_cpu(rsp->nsectors);
 	dev->logical_block_size	    = le16_to_cpu(rsp->logical_block_size);
 	dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
-	dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
 	dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
 	dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
 	dev->discard_alignment	    = le32_to_cpu(rsp->discard_alignment);
@@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
 	blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
 	blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
 	blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
-	blk_queue_max_write_same_sectors(dev->queue,
-					 dev->max_write_same_sectors);
 
 	/*
 	 * we don't support discards to "discontiguous" segments
@@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
 	}
 
 	rnbd_clt_info(dev,
-		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
+		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
 		       dev->gd->disk_name, dev->nsectors,
 		       dev->logical_block_size, dev->physical_block_size,
-		       dev->max_write_same_sectors, dev->max_discard_sectors,
+		       dev->max_discard_sectors,
 		       dev->discard_granularity, dev->discard_alignment,
 		       dev->secure_discard, dev->max_segments,
 		       dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
index 0c2cae7f39b9f..6946ba23d62e5 100644
--- a/drivers/block/rnbd/rnbd-clt.h
+++ b/drivers/block/rnbd/rnbd-clt.h
@@ -122,7 +122,6 @@ struct rnbd_clt_dev {
 	bool			wc;
 	bool			fua;
 	u32			max_hw_sectors;
-	u32			max_write_same_sectors;
 	u32			max_discard_sectors;
 	u32			discard_granularity;
 	u32			discard_alignment;
diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
index de5d5a8df81d7..3eb8b34bd1886 100644
--- a/drivers/block/rnbd/rnbd-proto.h
+++ b/drivers/block/rnbd/rnbd-proto.h
@@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
 	case RNBD_OP_SECURE_ERASE:
 		bio_opf = REQ_OP_SECURE_ERASE;
 		break;
-	case RNBD_OP_WRITE_SAME:
-		bio_opf = REQ_OP_WRITE_SAME;
-		break;
 	default:
 		WARN(1, "Unknown RNBD type: %d (flags %d)\n",
 		     rnbd_op(rnbd_opf), rnbd_opf);
@@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
 	case REQ_OP_SECURE_ERASE:
 		rnbd_opf = RNBD_OP_SECURE_ERASE;
 		break;
-	case REQ_OP_WRITE_SAME:
-		rnbd_opf = RNBD_OP_WRITE_SAME;
-		break;
 	case REQ_OP_FLUSH:
 		rnbd_opf = RNBD_OP_FLUSH;
 		break;
diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
index 132e950685d59..0e6b5687f8321 100644
--- a/drivers/block/rnbd/rnbd-srv.c
+++ b/drivers/block/rnbd/rnbd-srv.c
@@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
 		cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
 	rsp->max_hw_sectors =
 		cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
-	rsp->max_write_same_sectors =
-		cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
+	rsp->max_write_same_sectors = 0;
 	rsp->max_discard_sectors =
 		cpu_to_le32(rnbd_dev_get_max_discard_sects(rnbd_dev));
 	rsp->discard_granularity =
-- 
2.30.2

Re: [dm-devel] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>



--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Re: [PATCH 3/7] rnbd: drop WRITE_SAME support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Re: [dm-devel] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Guoqing Jiang]

On 2/9/22 4:28 PM, Christoph Hellwig wrote:
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.
>
> Signed-off-by: Christoph Hellwig<hch@lst.de>
> ---
>   drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
>   drivers/block/rnbd/rnbd-clt.h   | 1 -
>   drivers/block/rnbd/rnbd-proto.h | 6 ------
>   drivers/block/rnbd/rnbd-srv.c   | 3 +--
>   4 files changed, 3 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> index c08971de369fc..dc192d2738854 100644
> --- a/drivers/block/rnbd/rnbd-clt.c
> +++ b/drivers/block/rnbd/rnbd-clt.c
> @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
>   	dev->nsectors		    = le64_to_cpu(rsp->nsectors);
>   	dev->logical_block_size	    = le16_to_cpu(rsp->logical_block_size);
>   	dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> -	dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
>   	dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
>   	dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
>   	dev->discard_alignment	    = le32_to_cpu(rsp->discard_alignment);
> @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
>   	blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
>   	blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
>   	blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> -	blk_queue_max_write_same_sectors(dev->queue,
> -					 dev->max_write_same_sectors);
>   
>   	/*
>   	 * we don't support discards to "discontiguous" segments
> @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
>   	}
>   
>   	rnbd_clt_info(dev,
> -		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> +		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
>   		       dev->gd->disk_name, dev->nsectors,
>   		       dev->logical_block_size, dev->physical_block_size,
> -		       dev->max_write_same_sectors, dev->max_discard_sectors,
> +		       dev->max_discard_sectors,
>   		       dev->discard_granularity, dev->discard_alignment,
>   		       dev->secure_discard, dev->max_segments,
>   		       dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> index 0c2cae7f39b9f..6946ba23d62e5 100644
> --- a/drivers/block/rnbd/rnbd-clt.h
> +++ b/drivers/block/rnbd/rnbd-clt.h
> @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
>   	bool			wc;
>   	bool			fua;
>   	u32			max_hw_sectors;
> -	u32			max_write_same_sectors;
>   	u32			max_discard_sectors;
>   	u32			discard_granularity;
>   	u32			discard_alignment;

I am planning to remove more members inside struct rnbd_clt_dev.

> diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> index de5d5a8df81d7..3eb8b34bd1886 100644
> --- a/drivers/block/rnbd/rnbd-proto.h
> +++ b/drivers/block/rnbd/rnbd-proto.h
> @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
>   	case RNBD_OP_SECURE_ERASE:
>   		bio_opf = REQ_OP_SECURE_ERASE;
>   		break;
> -	case RNBD_OP_WRITE_SAME:
> -		bio_opf = REQ_OP_WRITE_SAME;
> -		break;
>   	default:
>   		WARN(1, "Unknown RNBD type: %d (flags %d)\n",
>   		     rnbd_op(rnbd_opf), rnbd_opf);
> @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
>   	case REQ_OP_SECURE_ERASE:
>   		rnbd_opf = RNBD_OP_SECURE_ERASE;
>   		break;
> -	case REQ_OP_WRITE_SAME:
> -		rnbd_opf = RNBD_OP_WRITE_SAME;
> -		break;
>   	case REQ_OP_FLUSH:
>   		rnbd_opf = RNBD_OP_FLUSH;
>   		break;
> diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> index 132e950685d59..0e6b5687f8321 100644
> --- a/drivers/block/rnbd/rnbd-srv.c
> +++ b/drivers/block/rnbd/rnbd-srv.c
> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>   		cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>   	rsp->max_hw_sectors =
>   		cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> -	rsp->max_write_same_sectors =
> -		cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> +	rsp->max_write_same_sectors = 0;

IIUC, I think we can delete max_write_same_sectors from rsp as well given
the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.

Thanks,
Guoqing

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Guoqing Jiang]

On 2/9/22 4:28 PM, Christoph Hellwig wrote:
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.
>
> Signed-off-by: Christoph Hellwig<hch@lst.de>
> ---
>   drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
>   drivers/block/rnbd/rnbd-clt.h   | 1 -
>   drivers/block/rnbd/rnbd-proto.h | 6 ------
>   drivers/block/rnbd/rnbd-srv.c   | 3 +--
>   4 files changed, 3 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> index c08971de369fc..dc192d2738854 100644
> --- a/drivers/block/rnbd/rnbd-clt.c
> +++ b/drivers/block/rnbd/rnbd-clt.c
> @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
>   	dev->nsectors		    = le64_to_cpu(rsp->nsectors);
>   	dev->logical_block_size	    = le16_to_cpu(rsp->logical_block_size);
>   	dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> -	dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
>   	dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
>   	dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
>   	dev->discard_alignment	    = le32_to_cpu(rsp->discard_alignment);
> @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
>   	blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
>   	blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
>   	blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> -	blk_queue_max_write_same_sectors(dev->queue,
> -					 dev->max_write_same_sectors);
>   
>   	/*
>   	 * we don't support discards to "discontiguous" segments
> @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
>   	}
>   
>   	rnbd_clt_info(dev,
> -		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> +		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
>   		       dev->gd->disk_name, dev->nsectors,
>   		       dev->logical_block_size, dev->physical_block_size,
> -		       dev->max_write_same_sectors, dev->max_discard_sectors,
> +		       dev->max_discard_sectors,
>   		       dev->discard_granularity, dev->discard_alignment,
>   		       dev->secure_discard, dev->max_segments,
>   		       dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> index 0c2cae7f39b9f..6946ba23d62e5 100644
> --- a/drivers/block/rnbd/rnbd-clt.h
> +++ b/drivers/block/rnbd/rnbd-clt.h
> @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
>   	bool			wc;
>   	bool			fua;
>   	u32			max_hw_sectors;
> -	u32			max_write_same_sectors;
>   	u32			max_discard_sectors;
>   	u32			discard_granularity;
>   	u32			discard_alignment;

I am planning to remove more members inside struct rnbd_clt_dev.

> diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> index de5d5a8df81d7..3eb8b34bd1886 100644
> --- a/drivers/block/rnbd/rnbd-proto.h
> +++ b/drivers/block/rnbd/rnbd-proto.h
> @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
>   	case RNBD_OP_SECURE_ERASE:
>   		bio_opf = REQ_OP_SECURE_ERASE;
>   		break;
> -	case RNBD_OP_WRITE_SAME:
> -		bio_opf = REQ_OP_WRITE_SAME;
> -		break;
>   	default:
>   		WARN(1, "Unknown RNBD type: %d (flags %d)\n",
>   		     rnbd_op(rnbd_opf), rnbd_opf);
> @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
>   	case REQ_OP_SECURE_ERASE:
>   		rnbd_opf = RNBD_OP_SECURE_ERASE;
>   		break;
> -	case REQ_OP_WRITE_SAME:
> -		rnbd_opf = RNBD_OP_WRITE_SAME;
> -		break;
>   	case REQ_OP_FLUSH:
>   		rnbd_opf = RNBD_OP_FLUSH;
>   		break;
> diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> index 132e950685d59..0e6b5687f8321 100644
> --- a/drivers/block/rnbd/rnbd-srv.c
> +++ b/drivers/block/rnbd/rnbd-srv.c
> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>   		cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>   	rsp->max_hw_sectors =
>   		cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> -	rsp->max_write_same_sectors =
> -		cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> +	rsp->max_write_same_sectors = 0;

IIUC, I think we can delete max_write_same_sectors from rsp as well given
the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.

Thanks,
Guoqing

Re: [PATCH 3/7] rnbd: drop WRITE_SAME support

[Guoqing Jiang]

On 2/9/22 4:28 PM, Christoph Hellwig wrote:
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.
>
> Signed-off-by: Christoph Hellwig<hch@lst.de>
> ---
>   drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
>   drivers/block/rnbd/rnbd-clt.h   | 1 -
>   drivers/block/rnbd/rnbd-proto.h | 6 ------
>   drivers/block/rnbd/rnbd-srv.c   | 3 +--
>   4 files changed, 3 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> index c08971de369fc..dc192d2738854 100644
> --- a/drivers/block/rnbd/rnbd-clt.c
> +++ b/drivers/block/rnbd/rnbd-clt.c
> @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
>   	dev->nsectors		    = le64_to_cpu(rsp->nsectors);
>   	dev->logical_block_size	    = le16_to_cpu(rsp->logical_block_size);
>   	dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> -	dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
>   	dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
>   	dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
>   	dev->discard_alignment	    = le32_to_cpu(rsp->discard_alignment);
> @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
>   	blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
>   	blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
>   	blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> -	blk_queue_max_write_same_sectors(dev->queue,
> -					 dev->max_write_same_sectors);
>   
>   	/*
>   	 * we don't support discards to "discontiguous" segments
> @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
>   	}
>   
>   	rnbd_clt_info(dev,
> -		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> +		       "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
>   		       dev->gd->disk_name, dev->nsectors,
>   		       dev->logical_block_size, dev->physical_block_size,
> -		       dev->max_write_same_sectors, dev->max_discard_sectors,
> +		       dev->max_discard_sectors,
>   		       dev->discard_granularity, dev->discard_alignment,
>   		       dev->secure_discard, dev->max_segments,
>   		       dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> index 0c2cae7f39b9f..6946ba23d62e5 100644
> --- a/drivers/block/rnbd/rnbd-clt.h
> +++ b/drivers/block/rnbd/rnbd-clt.h
> @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
>   	bool			wc;
>   	bool			fua;
>   	u32			max_hw_sectors;
> -	u32			max_write_same_sectors;
>   	u32			max_discard_sectors;
>   	u32			discard_granularity;
>   	u32			discard_alignment;

I am planning to remove more members inside struct rnbd_clt_dev.

> diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> index de5d5a8df81d7..3eb8b34bd1886 100644
> --- a/drivers/block/rnbd/rnbd-proto.h
> +++ b/drivers/block/rnbd/rnbd-proto.h
> @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
>   	case RNBD_OP_SECURE_ERASE:
>   		bio_opf = REQ_OP_SECURE_ERASE;
>   		break;
> -	case RNBD_OP_WRITE_SAME:
> -		bio_opf = REQ_OP_WRITE_SAME;
> -		break;
>   	default:
>   		WARN(1, "Unknown RNBD type: %d (flags %d)\n",
>   		     rnbd_op(rnbd_opf), rnbd_opf);
> @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
>   	case REQ_OP_SECURE_ERASE:
>   		rnbd_opf = RNBD_OP_SECURE_ERASE;
>   		break;
> -	case REQ_OP_WRITE_SAME:
> -		rnbd_opf = RNBD_OP_WRITE_SAME;
> -		break;
>   	case REQ_OP_FLUSH:
>   		rnbd_opf = RNBD_OP_FLUSH;
>   		break;
> diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> index 132e950685d59..0e6b5687f8321 100644
> --- a/drivers/block/rnbd/rnbd-srv.c
> +++ b/drivers/block/rnbd/rnbd-srv.c
> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>   		cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>   	rsp->max_hw_sectors =
>   		cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> -	rsp->max_write_same_sectors =
> -		cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> +	rsp->max_write_same_sectors = 0;

IIUC, I think we can delete max_write_same_sectors from rsp as well given
the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.

Thanks,
Guoqing

Re: [dm-devel] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

On Wed, Feb 9, 2022 at 10:05 AM Guoqing Jiang <guoqing.jiang@linux.dev> wrote:
>
>
>
> On 2/9/22 4:28 PM, Christoph Hellwig wrote:
> > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > even merged.
> >
> > Signed-off-by: Christoph Hellwig<hch@lst.de>
> > ---
> >   drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
> >   drivers/block/rnbd/rnbd-clt.h   | 1 -
> >   drivers/block/rnbd/rnbd-proto.h | 6 ------
> >   drivers/block/rnbd/rnbd-srv.c   | 3 +--
> >   4 files changed, 3 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> > index c08971de369fc..dc192d2738854 100644
> > --- a/drivers/block/rnbd/rnbd-clt.c
> > +++ b/drivers/block/rnbd/rnbd-clt.c
> > @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
> >       dev->nsectors               = le64_to_cpu(rsp->nsectors);
> >       dev->logical_block_size     = le16_to_cpu(rsp->logical_block_size);
> >       dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> > -     dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
> >       dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
> >       dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
> >       dev->discard_alignment      = le32_to_cpu(rsp->discard_alignment);
> > @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
> >       blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
> >       blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
> >       blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> > -     blk_queue_max_write_same_sectors(dev->queue,
> > -                                      dev->max_write_same_sectors);
> >
> >       /*
> >        * we don't support discards to "discontiguous" segments
> > @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
> >       }
> >
> >       rnbd_clt_info(dev,
> > -                    "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> > +                    "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> >                      dev->gd->disk_name, dev->nsectors,
> >                      dev->logical_block_size, dev->physical_block_size,
> > -                    dev->max_write_same_sectors, dev->max_discard_sectors,
> > +                    dev->max_discard_sectors,
> >                      dev->discard_granularity, dev->discard_alignment,
> >                      dev->secure_discard, dev->max_segments,
> >                      dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> > diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> > index 0c2cae7f39b9f..6946ba23d62e5 100644
> > --- a/drivers/block/rnbd/rnbd-clt.h
> > +++ b/drivers/block/rnbd/rnbd-clt.h
> > @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
> >       bool                    wc;
> >       bool                    fua;
> >       u32                     max_hw_sectors;
> > -     u32                     max_write_same_sectors;
> >       u32                     max_discard_sectors;
> >       u32                     discard_granularity;
> >       u32                     discard_alignment;
>
> I am planning to remove more members inside struct rnbd_clt_dev.
>
> > diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> > index de5d5a8df81d7..3eb8b34bd1886 100644
> > --- a/drivers/block/rnbd/rnbd-proto.h
> > +++ b/drivers/block/rnbd/rnbd-proto.h
> > @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
> >       case RNBD_OP_SECURE_ERASE:
> >               bio_opf = REQ_OP_SECURE_ERASE;
> >               break;
> > -     case RNBD_OP_WRITE_SAME:
> > -             bio_opf = REQ_OP_WRITE_SAME;
> > -             break;
> >       default:
> >               WARN(1, "Unknown RNBD type: %d (flags %d)\n",
> >                    rnbd_op(rnbd_opf), rnbd_opf);
> > @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
> >       case REQ_OP_SECURE_ERASE:
> >               rnbd_opf = RNBD_OP_SECURE_ERASE;
> >               break;
> > -     case REQ_OP_WRITE_SAME:
> > -             rnbd_opf = RNBD_OP_WRITE_SAME;
> > -             break;
> >       case REQ_OP_FLUSH:
> >               rnbd_opf = RNBD_OP_FLUSH;
> >               break;
> > diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> > index 132e950685d59..0e6b5687f8321 100644
> > --- a/drivers/block/rnbd/rnbd-srv.c
> > +++ b/drivers/block/rnbd/rnbd-srv.c
> > @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
> >               cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
> >       rsp->max_hw_sectors =
> >               cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> > -     rsp->max_write_same_sectors =
> > -             cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> > +     rsp->max_write_same_sectors = 0;
>
> IIUC, I think we can delete max_write_same_sectors from rsp as well given
> the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.
No, I don't think it's a good idea, we need to keep the protocol
compatible, so client for old kernel version
won't be confused.

The patch looks good to me, but I want to run a regression test before
give an acked.

Thanks!
Jinpu
>
> Thanks,
> Guoqing


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

On Wed, Feb 9, 2022 at 10:05 AM Guoqing Jiang <guoqing.jiang@linux.dev> wrote:
>
>
>
> On 2/9/22 4:28 PM, Christoph Hellwig wrote:
> > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > even merged.
> >
> > Signed-off-by: Christoph Hellwig<hch@lst.de>
> > ---
> >   drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
> >   drivers/block/rnbd/rnbd-clt.h   | 1 -
> >   drivers/block/rnbd/rnbd-proto.h | 6 ------
> >   drivers/block/rnbd/rnbd-srv.c   | 3 +--
> >   4 files changed, 3 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> > index c08971de369fc..dc192d2738854 100644
> > --- a/drivers/block/rnbd/rnbd-clt.c
> > +++ b/drivers/block/rnbd/rnbd-clt.c
> > @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
> >       dev->nsectors               = le64_to_cpu(rsp->nsectors);
> >       dev->logical_block_size     = le16_to_cpu(rsp->logical_block_size);
> >       dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> > -     dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
> >       dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
> >       dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
> >       dev->discard_alignment      = le32_to_cpu(rsp->discard_alignment);
> > @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
> >       blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
> >       blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
> >       blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> > -     blk_queue_max_write_same_sectors(dev->queue,
> > -                                      dev->max_write_same_sectors);
> >
> >       /*
> >        * we don't support discards to "discontiguous" segments
> > @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
> >       }
> >
> >       rnbd_clt_info(dev,
> > -                    "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> > +                    "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> >                      dev->gd->disk_name, dev->nsectors,
> >                      dev->logical_block_size, dev->physical_block_size,
> > -                    dev->max_write_same_sectors, dev->max_discard_sectors,
> > +                    dev->max_discard_sectors,
> >                      dev->discard_granularity, dev->discard_alignment,
> >                      dev->secure_discard, dev->max_segments,
> >                      dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> > diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> > index 0c2cae7f39b9f..6946ba23d62e5 100644
> > --- a/drivers/block/rnbd/rnbd-clt.h
> > +++ b/drivers/block/rnbd/rnbd-clt.h
> > @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
> >       bool                    wc;
> >       bool                    fua;
> >       u32                     max_hw_sectors;
> > -     u32                     max_write_same_sectors;
> >       u32                     max_discard_sectors;
> >       u32                     discard_granularity;
> >       u32                     discard_alignment;
>
> I am planning to remove more members inside struct rnbd_clt_dev.
>
> > diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> > index de5d5a8df81d7..3eb8b34bd1886 100644
> > --- a/drivers/block/rnbd/rnbd-proto.h
> > +++ b/drivers/block/rnbd/rnbd-proto.h
> > @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
> >       case RNBD_OP_SECURE_ERASE:
> >               bio_opf = REQ_OP_SECURE_ERASE;
> >               break;
> > -     case RNBD_OP_WRITE_SAME:
> > -             bio_opf = REQ_OP_WRITE_SAME;
> > -             break;
> >       default:
> >               WARN(1, "Unknown RNBD type: %d (flags %d)\n",
> >                    rnbd_op(rnbd_opf), rnbd_opf);
> > @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
> >       case REQ_OP_SECURE_ERASE:
> >               rnbd_opf = RNBD_OP_SECURE_ERASE;
> >               break;
> > -     case REQ_OP_WRITE_SAME:
> > -             rnbd_opf = RNBD_OP_WRITE_SAME;
> > -             break;
> >       case REQ_OP_FLUSH:
> >               rnbd_opf = RNBD_OP_FLUSH;
> >               break;
> > diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> > index 132e950685d59..0e6b5687f8321 100644
> > --- a/drivers/block/rnbd/rnbd-srv.c
> > +++ b/drivers/block/rnbd/rnbd-srv.c
> > @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
> >               cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
> >       rsp->max_hw_sectors =
> >               cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> > -     rsp->max_write_same_sectors =
> > -             cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> > +     rsp->max_write_same_sectors = 0;
>
> IIUC, I think we can delete max_write_same_sectors from rsp as well given
> the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.
No, I don't think it's a good idea, we need to keep the protocol
compatible, so client for old kernel version
won't be confused.

The patch looks good to me, but I want to run a regression test before
give an acked.

Thanks!
Jinpu
>
> Thanks,
> Guoqing

Re: [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

On Wed, Feb 9, 2022 at 10:05 AM Guoqing Jiang <guoqing.jiang@linux.dev> wrote:
>
>
>
> On 2/9/22 4:28 PM, Christoph Hellwig wrote:
> > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > even merged.
> >
> > Signed-off-by: Christoph Hellwig<hch@lst.de>
> > ---
> >   drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
> >   drivers/block/rnbd/rnbd-clt.h   | 1 -
> >   drivers/block/rnbd/rnbd-proto.h | 6 ------
> >   drivers/block/rnbd/rnbd-srv.c   | 3 +--
> >   4 files changed, 3 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> > index c08971de369fc..dc192d2738854 100644
> > --- a/drivers/block/rnbd/rnbd-clt.c
> > +++ b/drivers/block/rnbd/rnbd-clt.c
> > @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
> >       dev->nsectors               = le64_to_cpu(rsp->nsectors);
> >       dev->logical_block_size     = le16_to_cpu(rsp->logical_block_size);
> >       dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> > -     dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
> >       dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
> >       dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
> >       dev->discard_alignment      = le32_to_cpu(rsp->discard_alignment);
> > @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
> >       blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
> >       blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
> >       blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> > -     blk_queue_max_write_same_sectors(dev->queue,
> > -                                      dev->max_write_same_sectors);
> >
> >       /*
> >        * we don't support discards to "discontiguous" segments
> > @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
> >       }
> >
> >       rnbd_clt_info(dev,
> > -                    "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> > +                    "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> >                      dev->gd->disk_name, dev->nsectors,
> >                      dev->logical_block_size, dev->physical_block_size,
> > -                    dev->max_write_same_sectors, dev->max_discard_sectors,
> > +                    dev->max_discard_sectors,
> >                      dev->discard_granularity, dev->discard_alignment,
> >                      dev->secure_discard, dev->max_segments,
> >                      dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> > diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> > index 0c2cae7f39b9f..6946ba23d62e5 100644
> > --- a/drivers/block/rnbd/rnbd-clt.h
> > +++ b/drivers/block/rnbd/rnbd-clt.h
> > @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
> >       bool                    wc;
> >       bool                    fua;
> >       u32                     max_hw_sectors;
> > -     u32                     max_write_same_sectors;
> >       u32                     max_discard_sectors;
> >       u32                     discard_granularity;
> >       u32                     discard_alignment;
>
> I am planning to remove more members inside struct rnbd_clt_dev.
>
> > diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> > index de5d5a8df81d7..3eb8b34bd1886 100644
> > --- a/drivers/block/rnbd/rnbd-proto.h
> > +++ b/drivers/block/rnbd/rnbd-proto.h
> > @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
> >       case RNBD_OP_SECURE_ERASE:
> >               bio_opf = REQ_OP_SECURE_ERASE;
> >               break;
> > -     case RNBD_OP_WRITE_SAME:
> > -             bio_opf = REQ_OP_WRITE_SAME;
> > -             break;
> >       default:
> >               WARN(1, "Unknown RNBD type: %d (flags %d)\n",
> >                    rnbd_op(rnbd_opf), rnbd_opf);
> > @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
> >       case REQ_OP_SECURE_ERASE:
> >               rnbd_opf = RNBD_OP_SECURE_ERASE;
> >               break;
> > -     case REQ_OP_WRITE_SAME:
> > -             rnbd_opf = RNBD_OP_WRITE_SAME;
> > -             break;
> >       case REQ_OP_FLUSH:
> >               rnbd_opf = RNBD_OP_FLUSH;
> >               break;
> > diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> > index 132e950685d59..0e6b5687f8321 100644
> > --- a/drivers/block/rnbd/rnbd-srv.c
> > +++ b/drivers/block/rnbd/rnbd-srv.c
> > @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
> >               cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
> >       rsp->max_hw_sectors =
> >               cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> > -     rsp->max_write_same_sectors =
> > -             cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> > +     rsp->max_write_same_sectors = 0;
>
> IIUC, I think we can delete max_write_same_sectors from rsp as well given
> the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.
No, I don't think it's a good idea, we need to keep the protocol
compatible, so client for old kernel version
won't be confused.

The patch looks good to me, but I want to run a regression test before
give an acked.

Thanks!
Jinpu
>
> Thanks,
> Guoqing

Re: [dm-devel] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Guoqing Jiang]

On 2/9/22 5:13 PM, Jinpu Wang wrote:
>>> --- a/drivers/block/rnbd/rnbd-srv.c
>>> +++ b/drivers/block/rnbd/rnbd-srv.c
>>> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>>>                cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>>>        rsp->max_hw_sectors =
>>>                cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
>>> -     rsp->max_write_same_sectors =
>>> -             cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
>>> +     rsp->max_write_same_sectors = 0;
>> IIUC, I think we can delete max_write_same_sectors from rsp as well given
>> the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.
> No, I don't think it's a good idea, we need to keep the protocol
> compatible, so client for old kernel version
> won't be confused.

Fair enough. Then I guess it is better to add obsolete_ prefix like 
obsolete_rotational.

Thanks,
Guoqing

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Guoqing Jiang]

On 2/9/22 5:13 PM, Jinpu Wang wrote:
>>> --- a/drivers/block/rnbd/rnbd-srv.c
>>> +++ b/drivers/block/rnbd/rnbd-srv.c
>>> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>>>                cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>>>        rsp->max_hw_sectors =
>>>                cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
>>> -     rsp->max_write_same_sectors =
>>> -             cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
>>> +     rsp->max_write_same_sectors = 0;
>> IIUC, I think we can delete max_write_same_sectors from rsp as well given
>> the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.
> No, I don't think it's a good idea, we need to keep the protocol
> compatible, so client for old kernel version
> won't be confused.

Fair enough. Then I guess it is better to add obsolete_ prefix like 
obsolete_rotational.

Thanks,
Guoqing

Re: [PATCH 3/7] rnbd: drop WRITE_SAME support

[Guoqing Jiang]

On 2/9/22 5:13 PM, Jinpu Wang wrote:
>>> --- a/drivers/block/rnbd/rnbd-srv.c
>>> +++ b/drivers/block/rnbd/rnbd-srv.c
>>> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>>>                cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>>>        rsp->max_hw_sectors =
>>>                cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
>>> -     rsp->max_write_same_sectors =
>>> -             cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
>>> +     rsp->max_write_same_sectors = 0;
>> IIUC, I think we can delete max_write_same_sectors from rsp as well given
>> the earlier change in setup_request_queue and rnbd_clt_set_dev_attr.
> No, I don't think it's a good idea, we need to keep the protocol
> compatible, so client for old kernel version
> won't be confused.

Fair enough. Then I guess it is better to add obsolete_ prefix like 
obsolete_rotational.

Thanks,
Guoqing

Re: [dm-devel] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

Hi Christoph,


On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
>
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.

Do you think if it makes sense to instead of removing
REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?

Thanks!
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
>  drivers/block/rnbd/rnbd-clt.h   | 1 -
>  drivers/block/rnbd/rnbd-proto.h | 6 ------
>  drivers/block/rnbd/rnbd-srv.c   | 3 +--
>  4 files changed, 3 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> index c08971de369fc..dc192d2738854 100644
> --- a/drivers/block/rnbd/rnbd-clt.c
> +++ b/drivers/block/rnbd/rnbd-clt.c
> @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
>         dev->nsectors               = le64_to_cpu(rsp->nsectors);
>         dev->logical_block_size     = le16_to_cpu(rsp->logical_block_size);
>         dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> -       dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
>         dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
>         dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
>         dev->discard_alignment      = le32_to_cpu(rsp->discard_alignment);
> @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
>         blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
>         blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
>         blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> -       blk_queue_max_write_same_sectors(dev->queue,
> -                                        dev->max_write_same_sectors);
>
>         /*
>          * we don't support discards to "discontiguous" segments
> @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
>         }
>
>         rnbd_clt_info(dev,
> -                      "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> +                      "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
>                        dev->gd->disk_name, dev->nsectors,
>                        dev->logical_block_size, dev->physical_block_size,
> -                      dev->max_write_same_sectors, dev->max_discard_sectors,
> +                      dev->max_discard_sectors,
>                        dev->discard_granularity, dev->discard_alignment,
>                        dev->secure_discard, dev->max_segments,
>                        dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> index 0c2cae7f39b9f..6946ba23d62e5 100644
> --- a/drivers/block/rnbd/rnbd-clt.h
> +++ b/drivers/block/rnbd/rnbd-clt.h
> @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
>         bool                    wc;
>         bool                    fua;
>         u32                     max_hw_sectors;
> -       u32                     max_write_same_sectors;
>         u32                     max_discard_sectors;
>         u32                     discard_granularity;
>         u32                     discard_alignment;
> diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> index de5d5a8df81d7..3eb8b34bd1886 100644
> --- a/drivers/block/rnbd/rnbd-proto.h
> +++ b/drivers/block/rnbd/rnbd-proto.h
> @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
>         case RNBD_OP_SECURE_ERASE:
>                 bio_opf = REQ_OP_SECURE_ERASE;
>                 break;
> -       case RNBD_OP_WRITE_SAME:
> -               bio_opf = REQ_OP_WRITE_SAME;
> -               break;
>         default:
>                 WARN(1, "Unknown RNBD type: %d (flags %d)\n",
>                      rnbd_op(rnbd_opf), rnbd_opf);
> @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
>         case REQ_OP_SECURE_ERASE:
>                 rnbd_opf = RNBD_OP_SECURE_ERASE;
>                 break;
> -       case REQ_OP_WRITE_SAME:
> -               rnbd_opf = RNBD_OP_WRITE_SAME;
> -               break;
>         case REQ_OP_FLUSH:
>                 rnbd_opf = RNBD_OP_FLUSH;
>                 break;
> diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> index 132e950685d59..0e6b5687f8321 100644
> --- a/drivers/block/rnbd/rnbd-srv.c
> +++ b/drivers/block/rnbd/rnbd-srv.c
> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>                 cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>         rsp->max_hw_sectors =
>                 cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> -       rsp->max_write_same_sectors =
> -               cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> +       rsp->max_write_same_sectors = 0;
>         rsp->max_discard_sectors =
>                 cpu_to_le32(rnbd_dev_get_max_discard_sects(rnbd_dev));
>         rsp->discard_granularity =
> --
> 2.30.2
>


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

Hi Christoph,


On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
>
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.

Do you think if it makes sense to instead of removing
REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?

Thanks!
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
>  drivers/block/rnbd/rnbd-clt.h   | 1 -
>  drivers/block/rnbd/rnbd-proto.h | 6 ------
>  drivers/block/rnbd/rnbd-srv.c   | 3 +--
>  4 files changed, 3 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> index c08971de369fc..dc192d2738854 100644
> --- a/drivers/block/rnbd/rnbd-clt.c
> +++ b/drivers/block/rnbd/rnbd-clt.c
> @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
>         dev->nsectors               = le64_to_cpu(rsp->nsectors);
>         dev->logical_block_size     = le16_to_cpu(rsp->logical_block_size);
>         dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> -       dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
>         dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
>         dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
>         dev->discard_alignment      = le32_to_cpu(rsp->discard_alignment);
> @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
>         blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
>         blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
>         blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> -       blk_queue_max_write_same_sectors(dev->queue,
> -                                        dev->max_write_same_sectors);
>
>         /*
>          * we don't support discards to "discontiguous" segments
> @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
>         }
>
>         rnbd_clt_info(dev,
> -                      "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> +                      "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
>                        dev->gd->disk_name, dev->nsectors,
>                        dev->logical_block_size, dev->physical_block_size,
> -                      dev->max_write_same_sectors, dev->max_discard_sectors,
> +                      dev->max_discard_sectors,
>                        dev->discard_granularity, dev->discard_alignment,
>                        dev->secure_discard, dev->max_segments,
>                        dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> index 0c2cae7f39b9f..6946ba23d62e5 100644
> --- a/drivers/block/rnbd/rnbd-clt.h
> +++ b/drivers/block/rnbd/rnbd-clt.h
> @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
>         bool                    wc;
>         bool                    fua;
>         u32                     max_hw_sectors;
> -       u32                     max_write_same_sectors;
>         u32                     max_discard_sectors;
>         u32                     discard_granularity;
>         u32                     discard_alignment;
> diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> index de5d5a8df81d7..3eb8b34bd1886 100644
> --- a/drivers/block/rnbd/rnbd-proto.h
> +++ b/drivers/block/rnbd/rnbd-proto.h
> @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
>         case RNBD_OP_SECURE_ERASE:
>                 bio_opf = REQ_OP_SECURE_ERASE;
>                 break;
> -       case RNBD_OP_WRITE_SAME:
> -               bio_opf = REQ_OP_WRITE_SAME;
> -               break;
>         default:
>                 WARN(1, "Unknown RNBD type: %d (flags %d)\n",
>                      rnbd_op(rnbd_opf), rnbd_opf);
> @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
>         case REQ_OP_SECURE_ERASE:
>                 rnbd_opf = RNBD_OP_SECURE_ERASE;
>                 break;
> -       case REQ_OP_WRITE_SAME:
> -               rnbd_opf = RNBD_OP_WRITE_SAME;
> -               break;
>         case REQ_OP_FLUSH:
>                 rnbd_opf = RNBD_OP_FLUSH;
>                 break;
> diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> index 132e950685d59..0e6b5687f8321 100644
> --- a/drivers/block/rnbd/rnbd-srv.c
> +++ b/drivers/block/rnbd/rnbd-srv.c
> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>                 cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>         rsp->max_hw_sectors =
>                 cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> -       rsp->max_write_same_sectors =
> -               cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> +       rsp->max_write_same_sectors = 0;
>         rsp->max_discard_sectors =
>                 cpu_to_le32(rnbd_dev_get_max_discard_sects(rnbd_dev));
>         rsp->discard_granularity =
> --
> 2.30.2
>

Re: [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

Hi Christoph,


On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
>
> REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> even merged.

Do you think if it makes sense to instead of removing
REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?

Thanks!
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  drivers/block/rnbd/rnbd-clt.c   | 7 ++-----
>  drivers/block/rnbd/rnbd-clt.h   | 1 -
>  drivers/block/rnbd/rnbd-proto.h | 6 ------
>  drivers/block/rnbd/rnbd-srv.c   | 3 +--
>  4 files changed, 3 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/block/rnbd/rnbd-clt.c b/drivers/block/rnbd/rnbd-clt.c
> index c08971de369fc..dc192d2738854 100644
> --- a/drivers/block/rnbd/rnbd-clt.c
> +++ b/drivers/block/rnbd/rnbd-clt.c
> @@ -82,7 +82,6 @@ static int rnbd_clt_set_dev_attr(struct rnbd_clt_dev *dev,
>         dev->nsectors               = le64_to_cpu(rsp->nsectors);
>         dev->logical_block_size     = le16_to_cpu(rsp->logical_block_size);
>         dev->physical_block_size    = le16_to_cpu(rsp->physical_block_size);
> -       dev->max_write_same_sectors = le32_to_cpu(rsp->max_write_same_sectors);
>         dev->max_discard_sectors    = le32_to_cpu(rsp->max_discard_sectors);
>         dev->discard_granularity    = le32_to_cpu(rsp->discard_granularity);
>         dev->discard_alignment      = le32_to_cpu(rsp->discard_alignment);
> @@ -1359,8 +1358,6 @@ static void setup_request_queue(struct rnbd_clt_dev *dev)
>         blk_queue_logical_block_size(dev->queue, dev->logical_block_size);
>         blk_queue_physical_block_size(dev->queue, dev->physical_block_size);
>         blk_queue_max_hw_sectors(dev->queue, dev->max_hw_sectors);
> -       blk_queue_max_write_same_sectors(dev->queue,
> -                                        dev->max_write_same_sectors);
>
>         /*
>          * we don't support discards to "discontiguous" segments
> @@ -1610,10 +1607,10 @@ struct rnbd_clt_dev *rnbd_clt_map_device(const char *sessname,
>         }
>
>         rnbd_clt_info(dev,
> -                      "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_write_same_sectors: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
> +                      "map_device: Device mapped as %s (nsectors: %zu, logical_block_size: %d, physical_block_size: %d, max_discard_sectors: %d, discard_granularity: %d, discard_alignment: %d, secure_discard: %d, max_segments: %d, max_hw_sectors: %d, rotational: %d, wc: %d, fua: %d)\n",
>                        dev->gd->disk_name, dev->nsectors,
>                        dev->logical_block_size, dev->physical_block_size,
> -                      dev->max_write_same_sectors, dev->max_discard_sectors,
> +                      dev->max_discard_sectors,
>                        dev->discard_granularity, dev->discard_alignment,
>                        dev->secure_discard, dev->max_segments,
>                        dev->max_hw_sectors, dev->rotational, dev->wc, dev->fua);
> diff --git a/drivers/block/rnbd/rnbd-clt.h b/drivers/block/rnbd/rnbd-clt.h
> index 0c2cae7f39b9f..6946ba23d62e5 100644
> --- a/drivers/block/rnbd/rnbd-clt.h
> +++ b/drivers/block/rnbd/rnbd-clt.h
> @@ -122,7 +122,6 @@ struct rnbd_clt_dev {
>         bool                    wc;
>         bool                    fua;
>         u32                     max_hw_sectors;
> -       u32                     max_write_same_sectors;
>         u32                     max_discard_sectors;
>         u32                     discard_granularity;
>         u32                     discard_alignment;
> diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
> index de5d5a8df81d7..3eb8b34bd1886 100644
> --- a/drivers/block/rnbd/rnbd-proto.h
> +++ b/drivers/block/rnbd/rnbd-proto.h
> @@ -249,9 +249,6 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
>         case RNBD_OP_SECURE_ERASE:
>                 bio_opf = REQ_OP_SECURE_ERASE;
>                 break;
> -       case RNBD_OP_WRITE_SAME:
> -               bio_opf = REQ_OP_WRITE_SAME;
> -               break;
>         default:
>                 WARN(1, "Unknown RNBD type: %d (flags %d)\n",
>                      rnbd_op(rnbd_opf), rnbd_opf);
> @@ -284,9 +281,6 @@ static inline u32 rq_to_rnbd_flags(struct request *rq)
>         case REQ_OP_SECURE_ERASE:
>                 rnbd_opf = RNBD_OP_SECURE_ERASE;
>                 break;
> -       case REQ_OP_WRITE_SAME:
> -               rnbd_opf = RNBD_OP_WRITE_SAME;
> -               break;
>         case REQ_OP_FLUSH:
>                 rnbd_opf = RNBD_OP_FLUSH;
>                 break;
> diff --git a/drivers/block/rnbd/rnbd-srv.c b/drivers/block/rnbd/rnbd-srv.c
> index 132e950685d59..0e6b5687f8321 100644
> --- a/drivers/block/rnbd/rnbd-srv.c
> +++ b/drivers/block/rnbd/rnbd-srv.c
> @@ -548,8 +548,7 @@ static void rnbd_srv_fill_msg_open_rsp(struct rnbd_msg_open_rsp *rsp,
>                 cpu_to_le16(rnbd_dev_get_max_segs(rnbd_dev));
>         rsp->max_hw_sectors =
>                 cpu_to_le32(rnbd_dev_get_max_hw_sects(rnbd_dev));
> -       rsp->max_write_same_sectors =
> -               cpu_to_le32(bdev_write_same(rnbd_dev->bdev));
> +       rsp->max_write_same_sectors = 0;
>         rsp->max_discard_sectors =
>                 cpu_to_le32(rnbd_dev_get_max_discard_sects(rnbd_dev));
>         rsp->discard_granularity =
> --
> 2.30.2
>

Re: [dm-devel] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Christoph Hellwig]

On Wed, Feb 09, 2022 at 11:16:13AM +0100, Jinpu Wang wrote:
> Hi Christoph,
> 
> 
> On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
> >
> > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > even merged.
> 
> Do you think if it makes sense to instead of removing
> REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?

Well, they have different semantics, so you can't just "convert" it.
But it might make sense to add REQ_OP_WRITE_ZEROES.

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Christoph Hellwig]

On Wed, Feb 09, 2022 at 11:16:13AM +0100, Jinpu Wang wrote:
> Hi Christoph,
> 
> 
> On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
> >
> > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > even merged.
> 
> Do you think if it makes sense to instead of removing
> REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?

Well, they have different semantics, so you can't just "convert" it.
But it might make sense to add REQ_OP_WRITE_ZEROES.

Re: [PATCH 3/7] rnbd: drop WRITE_SAME support

[Christoph Hellwig]

On Wed, Feb 09, 2022 at 11:16:13AM +0100, Jinpu Wang wrote:
> Hi Christoph,
> 
> 
> On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
> >
> > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > even merged.
> 
> Do you think if it makes sense to instead of removing
> REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?

Well, they have different semantics, so you can't just "convert" it.
But it might make sense to add REQ_OP_WRITE_ZEROES.

Re: [dm-devel] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

On Wed, Feb 9, 2022 at 3:04 PM Christoph Hellwig <hch@lst.de> wrote:
>
> On Wed, Feb 09, 2022 at 11:16:13AM +0100, Jinpu Wang wrote:
> > Hi Christoph,
> >
> >
> > On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
> > >
> > > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > > even merged.
> >
> > Do you think if it makes sense to instead of removing
> > REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?
>
> Well, they have different semantics, so you can't just "convert" it.
> But it might make sense to add REQ_OP_WRITE_ZEROES.
Thanks, we will add support for REQ_OP_WRITE_ZEROES later.

For this patch, I've run internal tests, works fine.

Acked-by: Jack Wang <jinpu.wang@ionos.com>
Thanks!

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

On Wed, Feb 9, 2022 at 3:04 PM Christoph Hellwig <hch@lst.de> wrote:
>
> On Wed, Feb 09, 2022 at 11:16:13AM +0100, Jinpu Wang wrote:
> > Hi Christoph,
> >
> >
> > On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
> > >
> > > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > > even merged.
> >
> > Do you think if it makes sense to instead of removing
> > REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?
>
> Well, they have different semantics, so you can't just "convert" it.
> But it might make sense to add REQ_OP_WRITE_ZEROES.
Thanks, we will add support for REQ_OP_WRITE_ZEROES later.

For this patch, I've run internal tests, works fine.

Acked-by: Jack Wang <jinpu.wang@ionos.com>
Thanks!

Re: [PATCH 3/7] rnbd: drop WRITE_SAME support

[Jinpu Wang]

On Wed, Feb 9, 2022 at 3:04 PM Christoph Hellwig <hch@lst.de> wrote:
>
> On Wed, Feb 09, 2022 at 11:16:13AM +0100, Jinpu Wang wrote:
> > Hi Christoph,
> >
> >
> > On Wed, Feb 9, 2022 at 9:28 AM Christoph Hellwig <hch@lst.de> wrote:
> > >
> > > REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing
> > > code, which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was
> > > even merged.
> >
> > Do you think if it makes sense to instead of removing
> > REQ_OP_WRITE_SAME, simply convert it to REQ_OP_WRITE_ZEROES?
>
> Well, they have different semantics, so you can't just "convert" it.
> But it might make sense to add REQ_OP_WRITE_ZEROES.
Thanks, we will add support for REQ_OP_WRITE_ZEROES later.

For this patch, I've run internal tests, works fine.

Acked-by: Jack Wang <jinpu.wang@ionos.com>
Thanks!

[dm-devel] [PATCH 4/7] sd: remove write same support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/sd.c     | 75 ++++---------------------------------------
 drivers/scsi/sd_zbc.c |  2 --
 2 files changed, 7 insertions(+), 70 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2d648d27bfd71..fde2857f9bbf5 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1034,13 +1034,13 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
 		 * Reporting a maximum number of blocks that is not aligned
 		 * on the device physical size would cause a large write same
 		 * request to be split into physically unaligned chunks by
-		 * __blkdev_issue_write_zeroes() and __blkdev_issue_write_same()
-		 * even if the caller of these functions took care to align the
-		 * large request. So make sure the maximum reported is aligned
-		 * to the device physical block size. This is only an optional
-		 * optimization for regular disks, but this is mandatory to
-		 * avoid failure of large write same requests directed at
-		 * sequential write required zones of host-managed ZBC disks.
+		 * __blkdev_issue_write_zeroes() even if the caller of this
+		 * functions took care to align the large request. So make sure
+		 * the maximum reported is aligned to the device physical block
+		 * size. This is only an optional optimization for regular
+		 * disks, but this is mandatory to avoid failure of large write
+		 * same requests directed at sequential write required zones of
+		 * host-managed ZBC disks.
 		 */
 		sdkp->max_ws_blocks =
 			round_down(sdkp->max_ws_blocks,
@@ -1049,68 +1049,10 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
 	}
 
 out:
-	blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
-					 (logical_block_size >> 9));
 	blk_queue_max_write_zeroes_sectors(q, sdkp->max_ws_blocks *
 					 (logical_block_size >> 9));
 }
 
-/**
- * sd_setup_write_same_cmnd - write the same data to multiple blocks
- * @cmd: command to prepare
- *
- * Will set up either WRITE SAME(10) or WRITE SAME(16) depending on
- * the preference indicated by the target device.
- **/
-static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
-{
-	struct request *rq = scsi_cmd_to_rq(cmd);
-	struct scsi_device *sdp = cmd->device;
-	struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
-	struct bio *bio = rq->bio;
-	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
-	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
-	blk_status_t ret;
-
-	if (sdkp->device->no_write_same)
-		return BLK_STS_TARGET;
-
-	BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
-
-	rq->timeout = SD_WRITE_SAME_TIMEOUT;
-
-	if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff) {
-		cmd->cmd_len = 16;
-		cmd->cmnd[0] = WRITE_SAME_16;
-		put_unaligned_be64(lba, &cmd->cmnd[2]);
-		put_unaligned_be32(nr_blocks, &cmd->cmnd[10]);
-	} else {
-		cmd->cmd_len = 10;
-		cmd->cmnd[0] = WRITE_SAME;
-		put_unaligned_be32(lba, &cmd->cmnd[2]);
-		put_unaligned_be16(nr_blocks, &cmd->cmnd[7]);
-	}
-
-	cmd->transfersize = sdp->sector_size;
-	cmd->allowed = sdkp->max_retries;
-
-	/*
-	 * For WRITE SAME the data transferred via the DATA OUT buffer is
-	 * different from the amount of data actually written to the target.
-	 *
-	 * We set up __data_len to the amount of data transferred via the
-	 * DATA OUT buffer so that blk_rq_map_sg sets up the proper S/G list
-	 * to transfer a single sector of data first, but then reset it to
-	 * the amount of data to be written right after so that the I/O path
-	 * knows how much to actually write.
-	 */
-	rq->__data_len = sdp->sector_size;
-	ret = scsi_alloc_sgtables(cmd);
-	rq->__data_len = blk_rq_bytes(rq);
-
-	return ret;
-}
-
 static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
 {
 	struct request *rq = scsi_cmd_to_rq(cmd);
@@ -1343,8 +1285,6 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 		}
 	case REQ_OP_WRITE_ZEROES:
 		return sd_setup_write_zeroes_cmnd(cmd);
-	case REQ_OP_WRITE_SAME:
-		return sd_setup_write_same_cmnd(cmd);
 	case REQ_OP_FLUSH:
 		return sd_setup_flush_cmnd(cmd);
 	case REQ_OP_READ:
@@ -2039,7 +1979,6 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	switch (req_op(req)) {
 	case REQ_OP_DISCARD:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_ZONE_RESET:
 	case REQ_OP_ZONE_RESET_ALL:
 	case REQ_OP_ZONE_OPEN:
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 378d071e47cbc..7f466280993bb 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -423,7 +423,6 @@ static bool sd_zbc_need_zone_wp_update(struct request *rq)
 		return true;
 	case REQ_OP_WRITE:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 		return blk_rq_zone_is_seq(rq);
 	default:
 		return false;
@@ -477,7 +476,6 @@ static unsigned int sd_zbc_zone_wp_update(struct scsi_cmnd *cmd,
 		rq->__sector += sdkp->zones_wp_offset[zno];
 		fallthrough;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		if (sdkp->zones_wp_offset[zno] < sd_zbc_zone_sectors(sdkp))
 			sdkp->zones_wp_offset[zno] +=
-- 
2.30.2

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[Drbd-dev] [PATCH 4/7] sd: remove write same support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/sd.c     | 75 ++++---------------------------------------
 drivers/scsi/sd_zbc.c |  2 --
 2 files changed, 7 insertions(+), 70 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2d648d27bfd71..fde2857f9bbf5 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1034,13 +1034,13 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
 		 * Reporting a maximum number of blocks that is not aligned
 		 * on the device physical size would cause a large write same
 		 * request to be split into physically unaligned chunks by
-		 * __blkdev_issue_write_zeroes() and __blkdev_issue_write_same()
-		 * even if the caller of these functions took care to align the
-		 * large request. So make sure the maximum reported is aligned
-		 * to the device physical block size. This is only an optional
-		 * optimization for regular disks, but this is mandatory to
-		 * avoid failure of large write same requests directed at
-		 * sequential write required zones of host-managed ZBC disks.
+		 * __blkdev_issue_write_zeroes() even if the caller of this
+		 * functions took care to align the large request. So make sure
+		 * the maximum reported is aligned to the device physical block
+		 * size. This is only an optional optimization for regular
+		 * disks, but this is mandatory to avoid failure of large write
+		 * same requests directed at sequential write required zones of
+		 * host-managed ZBC disks.
 		 */
 		sdkp->max_ws_blocks =
 			round_down(sdkp->max_ws_blocks,
@@ -1049,68 +1049,10 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
 	}
 
 out:
-	blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
-					 (logical_block_size >> 9));
 	blk_queue_max_write_zeroes_sectors(q, sdkp->max_ws_blocks *
 					 (logical_block_size >> 9));
 }
 
-/**
- * sd_setup_write_same_cmnd - write the same data to multiple blocks
- * @cmd: command to prepare
- *
- * Will set up either WRITE SAME(10) or WRITE SAME(16) depending on
- * the preference indicated by the target device.
- **/
-static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
-{
-	struct request *rq = scsi_cmd_to_rq(cmd);
-	struct scsi_device *sdp = cmd->device;
-	struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
-	struct bio *bio = rq->bio;
-	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
-	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
-	blk_status_t ret;
-
-	if (sdkp->device->no_write_same)
-		return BLK_STS_TARGET;
-
-	BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
-
-	rq->timeout = SD_WRITE_SAME_TIMEOUT;
-
-	if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff) {
-		cmd->cmd_len = 16;
-		cmd->cmnd[0] = WRITE_SAME_16;
-		put_unaligned_be64(lba, &cmd->cmnd[2]);
-		put_unaligned_be32(nr_blocks, &cmd->cmnd[10]);
-	} else {
-		cmd->cmd_len = 10;
-		cmd->cmnd[0] = WRITE_SAME;
-		put_unaligned_be32(lba, &cmd->cmnd[2]);
-		put_unaligned_be16(nr_blocks, &cmd->cmnd[7]);
-	}
-
-	cmd->transfersize = sdp->sector_size;
-	cmd->allowed = sdkp->max_retries;
-
-	/*
-	 * For WRITE SAME the data transferred via the DATA OUT buffer is
-	 * different from the amount of data actually written to the target.
-	 *
-	 * We set up __data_len to the amount of data transferred via the
-	 * DATA OUT buffer so that blk_rq_map_sg sets up the proper S/G list
-	 * to transfer a single sector of data first, but then reset it to
-	 * the amount of data to be written right after so that the I/O path
-	 * knows how much to actually write.
-	 */
-	rq->__data_len = sdp->sector_size;
-	ret = scsi_alloc_sgtables(cmd);
-	rq->__data_len = blk_rq_bytes(rq);
-
-	return ret;
-}
-
 static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
 {
 	struct request *rq = scsi_cmd_to_rq(cmd);
@@ -1343,8 +1285,6 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 		}
 	case REQ_OP_WRITE_ZEROES:
 		return sd_setup_write_zeroes_cmnd(cmd);
-	case REQ_OP_WRITE_SAME:
-		return sd_setup_write_same_cmnd(cmd);
 	case REQ_OP_FLUSH:
 		return sd_setup_flush_cmnd(cmd);
 	case REQ_OP_READ:
@@ -2039,7 +1979,6 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	switch (req_op(req)) {
 	case REQ_OP_DISCARD:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_ZONE_RESET:
 	case REQ_OP_ZONE_RESET_ALL:
 	case REQ_OP_ZONE_OPEN:
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 378d071e47cbc..7f466280993bb 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -423,7 +423,6 @@ static bool sd_zbc_need_zone_wp_update(struct request *rq)
 		return true;
 	case REQ_OP_WRITE:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 		return blk_rq_zone_is_seq(rq);
 	default:
 		return false;
@@ -477,7 +476,6 @@ static unsigned int sd_zbc_zone_wp_update(struct scsi_cmnd *cmd,
 		rq->__sector += sdkp->zones_wp_offset[zno];
 		fallthrough;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		if (sdkp->zones_wp_offset[zno] < sd_zbc_zone_sectors(sdkp))
 			sdkp->zones_wp_offset[zno] +=
-- 
2.30.2

[PATCH 4/7] sd: remove write same support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/scsi/sd.c     | 75 ++++---------------------------------------
 drivers/scsi/sd_zbc.c |  2 --
 2 files changed, 7 insertions(+), 70 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2d648d27bfd71..fde2857f9bbf5 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1034,13 +1034,13 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
 		 * Reporting a maximum number of blocks that is not aligned
 		 * on the device physical size would cause a large write same
 		 * request to be split into physically unaligned chunks by
-		 * __blkdev_issue_write_zeroes() and __blkdev_issue_write_same()
-		 * even if the caller of these functions took care to align the
-		 * large request. So make sure the maximum reported is aligned
-		 * to the device physical block size. This is only an optional
-		 * optimization for regular disks, but this is mandatory to
-		 * avoid failure of large write same requests directed at
-		 * sequential write required zones of host-managed ZBC disks.
+		 * __blkdev_issue_write_zeroes() even if the caller of this
+		 * functions took care to align the large request. So make sure
+		 * the maximum reported is aligned to the device physical block
+		 * size. This is only an optional optimization for regular
+		 * disks, but this is mandatory to avoid failure of large write
+		 * same requests directed at sequential write required zones of
+		 * host-managed ZBC disks.
 		 */
 		sdkp->max_ws_blocks =
 			round_down(sdkp->max_ws_blocks,
@@ -1049,68 +1049,10 @@ static void sd_config_write_same(struct scsi_disk *sdkp)
 	}
 
 out:
-	blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
-					 (logical_block_size >> 9));
 	blk_queue_max_write_zeroes_sectors(q, sdkp->max_ws_blocks *
 					 (logical_block_size >> 9));
 }
 
-/**
- * sd_setup_write_same_cmnd - write the same data to multiple blocks
- * @cmd: command to prepare
- *
- * Will set up either WRITE SAME(10) or WRITE SAME(16) depending on
- * the preference indicated by the target device.
- **/
-static blk_status_t sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
-{
-	struct request *rq = scsi_cmd_to_rq(cmd);
-	struct scsi_device *sdp = cmd->device;
-	struct scsi_disk *sdkp = scsi_disk(rq->q->disk);
-	struct bio *bio = rq->bio;
-	u64 lba = sectors_to_logical(sdp, blk_rq_pos(rq));
-	u32 nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
-	blk_status_t ret;
-
-	if (sdkp->device->no_write_same)
-		return BLK_STS_TARGET;
-
-	BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
-
-	rq->timeout = SD_WRITE_SAME_TIMEOUT;
-
-	if (sdkp->ws16 || lba > 0xffffffff || nr_blocks > 0xffff) {
-		cmd->cmd_len = 16;
-		cmd->cmnd[0] = WRITE_SAME_16;
-		put_unaligned_be64(lba, &cmd->cmnd[2]);
-		put_unaligned_be32(nr_blocks, &cmd->cmnd[10]);
-	} else {
-		cmd->cmd_len = 10;
-		cmd->cmnd[0] = WRITE_SAME;
-		put_unaligned_be32(lba, &cmd->cmnd[2]);
-		put_unaligned_be16(nr_blocks, &cmd->cmnd[7]);
-	}
-
-	cmd->transfersize = sdp->sector_size;
-	cmd->allowed = sdkp->max_retries;
-
-	/*
-	 * For WRITE SAME the data transferred via the DATA OUT buffer is
-	 * different from the amount of data actually written to the target.
-	 *
-	 * We set up __data_len to the amount of data transferred via the
-	 * DATA OUT buffer so that blk_rq_map_sg sets up the proper S/G list
-	 * to transfer a single sector of data first, but then reset it to
-	 * the amount of data to be written right after so that the I/O path
-	 * knows how much to actually write.
-	 */
-	rq->__data_len = sdp->sector_size;
-	ret = scsi_alloc_sgtables(cmd);
-	rq->__data_len = blk_rq_bytes(rq);
-
-	return ret;
-}
-
 static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
 {
 	struct request *rq = scsi_cmd_to_rq(cmd);
@@ -1343,8 +1285,6 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
 		}
 	case REQ_OP_WRITE_ZEROES:
 		return sd_setup_write_zeroes_cmnd(cmd);
-	case REQ_OP_WRITE_SAME:
-		return sd_setup_write_same_cmnd(cmd);
 	case REQ_OP_FLUSH:
 		return sd_setup_flush_cmnd(cmd);
 	case REQ_OP_READ:
@@ -2039,7 +1979,6 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 	switch (req_op(req)) {
 	case REQ_OP_DISCARD:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_ZONE_RESET:
 	case REQ_OP_ZONE_RESET_ALL:
 	case REQ_OP_ZONE_OPEN:
diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 378d071e47cbc..7f466280993bb 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -423,7 +423,6 @@ static bool sd_zbc_need_zone_wp_update(struct request *rq)
 		return true;
 	case REQ_OP_WRITE:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 		return blk_rq_zone_is_seq(rq);
 	default:
 		return false;
@@ -477,7 +476,6 @@ static unsigned int sd_zbc_zone_wp_update(struct scsi_cmnd *cmd,
 		rq->__sector += sdkp->zones_wp_offset[zno];
 		fallthrough;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		if (sdkp->zones_wp_offset[zno] < sd_zbc_zone_sectors(sdkp))
 			sdkp->zones_wp_offset[zno] +=
-- 
2.30.2

Re: [dm-devel] [PATCH 4/7] sd: remove write same support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
> deleting it.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---


Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>




--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 4/7] sd: remove write same support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
> deleting it.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---


Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Re: [PATCH 4/7] sd: remove write same support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
> deleting it.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---


Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

[dm-devel] [PATCH 5/7] md: drop WRITE_SAME support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/md/md-linear.c    | 1 -
 drivers/md/md-multipath.c | 1 -
 drivers/md/md.h           | 7 -------
 drivers/md/raid0.c        | 2 --
 drivers/md/raid1.c        | 4 +---
 drivers/md/raid10.c       | 1 -
 drivers/md/raid5.c        | 1 -
 7 files changed, 1 insertion(+), 16 deletions(-)

diff --git a/drivers/md/md-linear.c b/drivers/md/md-linear.c
index 1ff51647a6822..0f55b079371b1 100644
--- a/drivers/md/md-linear.c
+++ b/drivers/md/md-linear.c
@@ -259,7 +259,6 @@ static bool linear_make_request(struct mddev *mddev, struct bio *bio)
 		if (mddev->gendisk)
 			trace_block_bio_remap(bio, disk_devt(mddev->gendisk),
 					      bio_sector);
-		mddev_check_writesame(mddev, bio);
 		mddev_check_write_zeroes(mddev, bio);
 		submit_bio_noacct(bio);
 	}
diff --git a/drivers/md/md-multipath.c b/drivers/md/md-multipath.c
index 97fb948e3e741..68dec76694d53 100644
--- a/drivers/md/md-multipath.c
+++ b/drivers/md/md-multipath.c
@@ -127,7 +127,6 @@ static bool multipath_make_request(struct mddev *mddev, struct bio * bio)
 	mp_bh->bio.bi_opf |= REQ_FAILFAST_TRANSPORT;
 	mp_bh->bio.bi_end_io = multipath_end_request;
 	mp_bh->bio.bi_private = mp_bh;
-	mddev_check_writesame(mddev, &mp_bh->bio);
 	mddev_check_write_zeroes(mddev, &mp_bh->bio);
 	submit_bio_noacct(&mp_bh->bio);
 	return true;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index f1bf3625ef4c9..6ac2838645336 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -797,13 +797,6 @@ static inline void mddev_clear_unsupported_flags(struct mddev *mddev,
 	mddev->flags &= ~unsupported_flags;
 }
 
-static inline void mddev_check_writesame(struct mddev *mddev, struct bio *bio)
-{
-	if (bio_op(bio) == REQ_OP_WRITE_SAME &&
-	    !bio->bi_bdev->bd_disk->queue->limits.max_write_same_sectors)
-		mddev->queue->limits.max_write_same_sectors = 0;
-}
-
 static inline void mddev_check_write_zeroes(struct mddev *mddev, struct bio *bio)
 {
 	if (bio_op(bio) == REQ_OP_WRITE_ZEROES &&
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index b59a77b31b90d..b21e101183f44 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -402,7 +402,6 @@ static int raid0_run(struct mddev *mddev)
 		bool discard_supported = false;
 
 		blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
-		blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, mddev->chunk_sectors);
 		blk_queue_max_discard_sectors(mddev->queue, UINT_MAX);
 
@@ -594,7 +593,6 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio)
 	if (mddev->gendisk)
 		trace_block_bio_remap(bio, disk_devt(mddev->gendisk),
 				      bio_sector);
-	mddev_check_writesame(mddev, bio);
 	mddev_check_write_zeroes(mddev, bio);
 	submit_bio_noacct(bio);
 	return true;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index c3288d46948de..9cec48d335065 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -3147,10 +3147,8 @@ static int raid1_run(struct mddev *mddev)
 	if (IS_ERR(conf))
 		return PTR_ERR(conf);
 
-	if (mddev->queue) {
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
+	if (mddev->queue)
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
-	}
 
 	rdev_for_each(rdev, mddev) {
 		if (!mddev->gendisk)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 5dd2e17e1d0ea..764ca020b7a40 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4113,7 +4113,6 @@ static int raid10_run(struct mddev *mddev)
 	if (mddev->queue) {
 		blk_queue_max_discard_sectors(mddev->queue,
 					      UINT_MAX);
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
 		blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
 		raid10_set_io_opt(conf);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 8891aaba65964..f5f36fdd37336 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -7767,7 +7767,6 @@ static int raid5_run(struct mddev *mddev)
 		mddev->queue->limits.discard_alignment = stripe;
 		mddev->queue->limits.discard_granularity = stripe;
 
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
 
 		rdev_for_each(rdev, mddev) {
-- 
2.30.2

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[Drbd-dev] [PATCH 5/7] md: drop WRITE_SAME support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/md/md-linear.c    | 1 -
 drivers/md/md-multipath.c | 1 -
 drivers/md/md.h           | 7 -------
 drivers/md/raid0.c        | 2 --
 drivers/md/raid1.c        | 4 +---
 drivers/md/raid10.c       | 1 -
 drivers/md/raid5.c        | 1 -
 7 files changed, 1 insertion(+), 16 deletions(-)

diff --git a/drivers/md/md-linear.c b/drivers/md/md-linear.c
index 1ff51647a6822..0f55b079371b1 100644
--- a/drivers/md/md-linear.c
+++ b/drivers/md/md-linear.c
@@ -259,7 +259,6 @@ static bool linear_make_request(struct mddev *mddev, struct bio *bio)
 		if (mddev->gendisk)
 			trace_block_bio_remap(bio, disk_devt(mddev->gendisk),
 					      bio_sector);
-		mddev_check_writesame(mddev, bio);
 		mddev_check_write_zeroes(mddev, bio);
 		submit_bio_noacct(bio);
 	}
diff --git a/drivers/md/md-multipath.c b/drivers/md/md-multipath.c
index 97fb948e3e741..68dec76694d53 100644
--- a/drivers/md/md-multipath.c
+++ b/drivers/md/md-multipath.c
@@ -127,7 +127,6 @@ static bool multipath_make_request(struct mddev *mddev, struct bio * bio)
 	mp_bh->bio.bi_opf |= REQ_FAILFAST_TRANSPORT;
 	mp_bh->bio.bi_end_io = multipath_end_request;
 	mp_bh->bio.bi_private = mp_bh;
-	mddev_check_writesame(mddev, &mp_bh->bio);
 	mddev_check_write_zeroes(mddev, &mp_bh->bio);
 	submit_bio_noacct(&mp_bh->bio);
 	return true;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index f1bf3625ef4c9..6ac2838645336 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -797,13 +797,6 @@ static inline void mddev_clear_unsupported_flags(struct mddev *mddev,
 	mddev->flags &= ~unsupported_flags;
 }
 
-static inline void mddev_check_writesame(struct mddev *mddev, struct bio *bio)
-{
-	if (bio_op(bio) == REQ_OP_WRITE_SAME &&
-	    !bio->bi_bdev->bd_disk->queue->limits.max_write_same_sectors)
-		mddev->queue->limits.max_write_same_sectors = 0;
-}
-
 static inline void mddev_check_write_zeroes(struct mddev *mddev, struct bio *bio)
 {
 	if (bio_op(bio) == REQ_OP_WRITE_ZEROES &&
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index b59a77b31b90d..b21e101183f44 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -402,7 +402,6 @@ static int raid0_run(struct mddev *mddev)
 		bool discard_supported = false;
 
 		blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
-		blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, mddev->chunk_sectors);
 		blk_queue_max_discard_sectors(mddev->queue, UINT_MAX);
 
@@ -594,7 +593,6 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio)
 	if (mddev->gendisk)
 		trace_block_bio_remap(bio, disk_devt(mddev->gendisk),
 				      bio_sector);
-	mddev_check_writesame(mddev, bio);
 	mddev_check_write_zeroes(mddev, bio);
 	submit_bio_noacct(bio);
 	return true;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index c3288d46948de..9cec48d335065 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -3147,10 +3147,8 @@ static int raid1_run(struct mddev *mddev)
 	if (IS_ERR(conf))
 		return PTR_ERR(conf);
 
-	if (mddev->queue) {
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
+	if (mddev->queue)
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
-	}
 
 	rdev_for_each(rdev, mddev) {
 		if (!mddev->gendisk)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 5dd2e17e1d0ea..764ca020b7a40 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4113,7 +4113,6 @@ static int raid10_run(struct mddev *mddev)
 	if (mddev->queue) {
 		blk_queue_max_discard_sectors(mddev->queue,
 					      UINT_MAX);
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
 		blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
 		raid10_set_io_opt(conf);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 8891aaba65964..f5f36fdd37336 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -7767,7 +7767,6 @@ static int raid5_run(struct mddev *mddev)
 		mddev->queue->limits.discard_alignment = stripe;
 		mddev->queue->limits.discard_granularity = stripe;
 
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
 
 		rdev_for_each(rdev, mddev) {
-- 
2.30.2

[PATCH 5/7] md: drop WRITE_SAME support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/md/md-linear.c    | 1 -
 drivers/md/md-multipath.c | 1 -
 drivers/md/md.h           | 7 -------
 drivers/md/raid0.c        | 2 --
 drivers/md/raid1.c        | 4 +---
 drivers/md/raid10.c       | 1 -
 drivers/md/raid5.c        | 1 -
 7 files changed, 1 insertion(+), 16 deletions(-)

diff --git a/drivers/md/md-linear.c b/drivers/md/md-linear.c
index 1ff51647a6822..0f55b079371b1 100644
--- a/drivers/md/md-linear.c
+++ b/drivers/md/md-linear.c
@@ -259,7 +259,6 @@ static bool linear_make_request(struct mddev *mddev, struct bio *bio)
 		if (mddev->gendisk)
 			trace_block_bio_remap(bio, disk_devt(mddev->gendisk),
 					      bio_sector);
-		mddev_check_writesame(mddev, bio);
 		mddev_check_write_zeroes(mddev, bio);
 		submit_bio_noacct(bio);
 	}
diff --git a/drivers/md/md-multipath.c b/drivers/md/md-multipath.c
index 97fb948e3e741..68dec76694d53 100644
--- a/drivers/md/md-multipath.c
+++ b/drivers/md/md-multipath.c
@@ -127,7 +127,6 @@ static bool multipath_make_request(struct mddev *mddev, struct bio * bio)
 	mp_bh->bio.bi_opf |= REQ_FAILFAST_TRANSPORT;
 	mp_bh->bio.bi_end_io = multipath_end_request;
 	mp_bh->bio.bi_private = mp_bh;
-	mddev_check_writesame(mddev, &mp_bh->bio);
 	mddev_check_write_zeroes(mddev, &mp_bh->bio);
 	submit_bio_noacct(&mp_bh->bio);
 	return true;
diff --git a/drivers/md/md.h b/drivers/md/md.h
index f1bf3625ef4c9..6ac2838645336 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -797,13 +797,6 @@ static inline void mddev_clear_unsupported_flags(struct mddev *mddev,
 	mddev->flags &= ~unsupported_flags;
 }
 
-static inline void mddev_check_writesame(struct mddev *mddev, struct bio *bio)
-{
-	if (bio_op(bio) == REQ_OP_WRITE_SAME &&
-	    !bio->bi_bdev->bd_disk->queue->limits.max_write_same_sectors)
-		mddev->queue->limits.max_write_same_sectors = 0;
-}
-
 static inline void mddev_check_write_zeroes(struct mddev *mddev, struct bio *bio)
 {
 	if (bio_op(bio) == REQ_OP_WRITE_ZEROES &&
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index b59a77b31b90d..b21e101183f44 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -402,7 +402,6 @@ static int raid0_run(struct mddev *mddev)
 		bool discard_supported = false;
 
 		blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
-		blk_queue_max_write_same_sectors(mddev->queue, mddev->chunk_sectors);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, mddev->chunk_sectors);
 		blk_queue_max_discard_sectors(mddev->queue, UINT_MAX);
 
@@ -594,7 +593,6 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio)
 	if (mddev->gendisk)
 		trace_block_bio_remap(bio, disk_devt(mddev->gendisk),
 				      bio_sector);
-	mddev_check_writesame(mddev, bio);
 	mddev_check_write_zeroes(mddev, bio);
 	submit_bio_noacct(bio);
 	return true;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index c3288d46948de..9cec48d335065 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -3147,10 +3147,8 @@ static int raid1_run(struct mddev *mddev)
 	if (IS_ERR(conf))
 		return PTR_ERR(conf);
 
-	if (mddev->queue) {
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
+	if (mddev->queue)
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
-	}
 
 	rdev_for_each(rdev, mddev) {
 		if (!mddev->gendisk)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 5dd2e17e1d0ea..764ca020b7a40 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -4113,7 +4113,6 @@ static int raid10_run(struct mddev *mddev)
 	if (mddev->queue) {
 		blk_queue_max_discard_sectors(mddev->queue,
 					      UINT_MAX);
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
 		blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
 		raid10_set_io_opt(conf);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 8891aaba65964..f5f36fdd37336 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -7767,7 +7767,6 @@ static int raid5_run(struct mddev *mddev)
 		mddev->queue->limits.discard_alignment = stripe;
 		mddev->queue->limits.discard_granularity = stripe;
 
-		blk_queue_max_write_same_sectors(mddev->queue, 0);
 		blk_queue_max_write_zeroes_sectors(mddev->queue, 0);
 
 		rdev_for_each(rdev, mddev) {
-- 
2.30.2

[dm-devel] [PATCH 6/7] dm: remove write same support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/md/dm-core.h          |  1 -
 drivers/md/dm-crypt.c         |  1 -
 drivers/md/dm-ebs-target.c    |  1 -
 drivers/md/dm-io.c            | 22 ++--------------------
 drivers/md/dm-linear.c        |  1 -
 drivers/md/dm-mpath.c         |  1 -
 drivers/md/dm-rq.c            |  3 ---
 drivers/md/dm-stripe.c        |  4 +---
 drivers/md/dm-table.c         | 29 -----------------------------
 drivers/md/dm-zone.c          |  4 ----
 drivers/md/dm.c               | 15 ---------------
 include/linux/device-mapper.h |  6 ------
 12 files changed, 3 insertions(+), 85 deletions(-)

diff --git a/drivers/md/dm-core.h b/drivers/md/dm-core.h
index 72d18c3fbf1f6..18b26882d25ac 100644
--- a/drivers/md/dm-core.h
+++ b/drivers/md/dm-core.h
@@ -140,7 +140,6 @@ struct mapped_device {
 #define DMF_EMULATE_ZONE_APPEND 9
 
 void disable_discard(struct mapped_device *md);
-void disable_write_same(struct mapped_device *md);
 void disable_write_zeroes(struct mapped_device *md);
 
 static inline sector_t dm_get_size(struct mapped_device *md)
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index a5006cb6ee8ad..e0e846a35947f 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1996,7 +1996,6 @@ static bool kcryptd_crypt_write_inline(struct crypt_config *cc,
 	 */
 	switch (bio_op(ctx->bio_in)) {
 	case REQ_OP_WRITE:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE_ZEROES:
 		return true;
 	default:
diff --git a/drivers/md/dm-ebs-target.c b/drivers/md/dm-ebs-target.c
index 7ce5d509b9403..0221fa63f888f 100644
--- a/drivers/md/dm-ebs-target.c
+++ b/drivers/md/dm-ebs-target.c
@@ -335,7 +335,6 @@ static int ebs_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
 	ti->num_secure_erase_bios = 0;
-	ti->num_write_same_bios = 0;
 	ti->num_write_zeroes_bios = 0;
 	return 0;
 bad:
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index 23e038f8dc845..0969aa39655a4 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -304,7 +304,6 @@ static void do_region(int op, int op_flags, unsigned region,
 	unsigned num_bvecs;
 	sector_t remaining = where->count;
 	struct request_queue *q = bdev_get_queue(where->bdev);
-	unsigned short logical_block_size = queue_logical_block_size(q);
 	sector_t num_sectors;
 	unsigned int special_cmd_max_sectors;
 
@@ -315,10 +314,8 @@ static void do_region(int op, int op_flags, unsigned region,
 		special_cmd_max_sectors = q->limits.max_discard_sectors;
 	else if (op == REQ_OP_WRITE_ZEROES)
 		special_cmd_max_sectors = q->limits.max_write_zeroes_sectors;
-	else if (op == REQ_OP_WRITE_SAME)
-		special_cmd_max_sectors = q->limits.max_write_same_sectors;
-	if ((op == REQ_OP_DISCARD || op == REQ_OP_WRITE_ZEROES ||
-	     op == REQ_OP_WRITE_SAME) && special_cmd_max_sectors == 0) {
+	if ((op == REQ_OP_DISCARD || op == REQ_OP_WRITE_ZEROES) &&
+	    special_cmd_max_sectors == 0) {
 		atomic_inc(&io->count);
 		dec_count(io, region, BLK_STS_NOTSUPP);
 		return;
@@ -337,9 +334,6 @@ static void do_region(int op, int op_flags, unsigned region,
 		case REQ_OP_WRITE_ZEROES:
 			num_bvecs = 0;
 			break;
-		case REQ_OP_WRITE_SAME:
-			num_bvecs = 1;
-			break;
 		default:
 			num_bvecs = bio_max_segs(dm_sector_div_up(remaining,
 						(PAGE_SIZE >> SECTOR_SHIFT)));
@@ -355,18 +349,6 @@ static void do_region(int op, int op_flags, unsigned region,
 			num_sectors = min_t(sector_t, special_cmd_max_sectors, remaining);
 			bio->bi_iter.bi_size = num_sectors << SECTOR_SHIFT;
 			remaining -= num_sectors;
-		} else if (op == REQ_OP_WRITE_SAME) {
-			/*
-			 * WRITE SAME only uses a single page.
-			 */
-			dp->get_page(dp, &page, &len, &offset);
-			bio_add_page(bio, page, logical_block_size, offset);
-			num_sectors = min_t(sector_t, special_cmd_max_sectors, remaining);
-			bio->bi_iter.bi_size = num_sectors << SECTOR_SHIFT;
-
-			offset = 0;
-			remaining -= num_sectors;
-			dp->next_page(dp);
 		} else while (remaining) {
 			/*
 			 * Try and add as many pages as possible.
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 1b97a11d71517..76b486e4d2be1 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -60,7 +60,6 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
 	ti->num_secure_erase_bios = 1;
-	ti->num_write_same_bios = 1;
 	ti->num_write_zeroes_bios = 1;
 	ti->private = lc;
 	return 0;
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index f4719b65e5e33..9ab971834a535 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1252,7 +1252,6 @@ static int multipath_ctr(struct dm_target *ti, unsigned argc, char **argv)
 
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
-	ti->num_write_same_bios = 1;
 	ti->num_write_zeroes_bios = 1;
 	if (m->queue_mode == DM_TYPE_BIO_BASED)
 		ti->per_io_data_size = multipath_per_bio_data_size();
diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c
index 579ab6183d4d8..3907950a0ddcc 100644
--- a/drivers/md/dm-rq.c
+++ b/drivers/md/dm-rq.c
@@ -217,9 +217,6 @@ static void dm_done(struct request *clone, blk_status_t error, bool mapped)
 		if (req_op(clone) == REQ_OP_DISCARD &&
 		    !clone->q->limits.max_discard_sectors)
 			disable_discard(tio->md);
-		else if (req_op(clone) == REQ_OP_WRITE_SAME &&
-			 !clone->q->limits.max_write_same_sectors)
-			disable_write_same(tio->md);
 		else if (req_op(clone) == REQ_OP_WRITE_ZEROES &&
 			 !clone->q->limits.max_write_zeroes_sectors)
 			disable_write_zeroes(tio->md);
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index e566115ec0bb8..c81d331d1afe9 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -157,7 +157,6 @@ static int stripe_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = stripes;
 	ti->num_discard_bios = stripes;
 	ti->num_secure_erase_bios = stripes;
-	ti->num_write_same_bios = stripes;
 	ti->num_write_zeroes_bios = stripes;
 
 	sc->chunk_size = chunk_size;
@@ -284,8 +283,7 @@ static int stripe_map(struct dm_target *ti, struct bio *bio)
 	}
 	if (unlikely(bio_op(bio) == REQ_OP_DISCARD) ||
 	    unlikely(bio_op(bio) == REQ_OP_SECURE_ERASE) ||
-	    unlikely(bio_op(bio) == REQ_OP_WRITE_ZEROES) ||
-	    unlikely(bio_op(bio) == REQ_OP_WRITE_SAME)) {
+	    unlikely(bio_op(bio) == REQ_OP_WRITE_ZEROES)) {
 		target_bio_nr = dm_bio_get_target_bio_nr(bio);
 		BUG_ON(target_bio_nr >= sc->stripes);
 		return stripe_map_range(sc, bio, target_bio_nr);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index e43096cfe9e22..88ab986379342 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1822,33 +1822,6 @@ static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
 	return !blk_queue_add_random(q);
 }
 
-static int device_not_write_same_capable(struct dm_target *ti, struct dm_dev *dev,
-					 sector_t start, sector_t len, void *data)
-{
-	struct request_queue *q = bdev_get_queue(dev->bdev);
-
-	return !q->limits.max_write_same_sectors;
-}
-
-static bool dm_table_supports_write_same(struct dm_table *t)
-{
-	struct dm_target *ti;
-	unsigned i;
-
-	for (i = 0; i < dm_table_get_num_targets(t); i++) {
-		ti = dm_table_get_target(t, i);
-
-		if (!ti->num_write_same_bios)
-			return false;
-
-		if (!ti->type->iterate_devices ||
-		    ti->type->iterate_devices(ti, device_not_write_same_capable, NULL))
-			return false;
-	}
-
-	return true;
-}
-
 static int device_not_write_zeroes_capable(struct dm_target *ti, struct dm_dev *dev,
 					   sector_t start, sector_t len, void *data)
 {
@@ -2027,8 +2000,6 @@ int dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 	else
 		blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
 
-	if (!dm_table_supports_write_same(t))
-		q->limits.max_write_same_sectors = 0;
 	if (!dm_table_supports_write_zeroes(t))
 		q->limits.max_write_zeroes_sectors = 0;
 
diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
index 6d82a34438c85..c1ca9be4b79e9 100644
--- a/drivers/md/dm-zone.c
+++ b/drivers/md/dm-zone.c
@@ -130,7 +130,6 @@ bool dm_is_zone_write(struct mapped_device *md, struct bio *bio)
 
 	switch (bio_op(bio)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		return !op_is_flush(bio->bi_opf) && bio_sectors(bio);
 	default:
@@ -390,7 +389,6 @@ static bool dm_zone_map_bio_begin(struct mapped_device *md,
 	case REQ_OP_ZONE_FINISH:
 		return true;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		/* Writes must be aligned to the zone write pointer */
 		if ((clone->bi_iter.bi_sector & (zsectors - 1)) != zwp_offset)
@@ -446,7 +444,6 @@ static blk_status_t dm_zone_map_bio_end(struct mapped_device *md,
 			   blk_queue_zone_sectors(md->queue));
 		return BLK_STS_OK;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		WRITE_ONCE(md->zwp_offset[zno], zwp_offset + nr_sectors);
 		return BLK_STS_OK;
@@ -503,7 +500,6 @@ static bool dm_need_zone_wp_tracking(struct bio *orig_bio)
 		return false;
 	switch (bio_op(orig_bio)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 	case REQ_OP_ZONE_RESET:
 	case REQ_OP_ZONE_FINISH:
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index ab9cc91931f99..028771f77aa04 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -856,14 +856,6 @@ void disable_discard(struct mapped_device *md)
 	blk_queue_flag_clear(QUEUE_FLAG_DISCARD, md->queue);
 }
 
-void disable_write_same(struct mapped_device *md)
-{
-	struct queue_limits *limits = dm_get_queue_limits(md);
-
-	/* device doesn't really support WRITE SAME, disable it */
-	limits->max_write_same_sectors = 0;
-}
-
 void disable_write_zeroes(struct mapped_device *md)
 {
 	struct queue_limits *limits = dm_get_queue_limits(md);
@@ -890,9 +882,6 @@ static void clone_endio(struct bio *bio)
 		if (bio_op(bio) == REQ_OP_DISCARD &&
 		    !q->limits.max_discard_sectors)
 			disable_discard(md);
-		else if (bio_op(bio) == REQ_OP_WRITE_SAME &&
-			 !q->limits.max_write_same_sectors)
-			disable_write_same(md);
 		else if (bio_op(bio) == REQ_OP_WRITE_ZEROES &&
 			 !q->limits.max_write_zeroes_sectors)
 			disable_write_zeroes(md);
@@ -1320,7 +1309,6 @@ static bool is_abnormal_io(struct bio *bio)
 	switch (bio_op(bio)) {
 	case REQ_OP_DISCARD:
 	case REQ_OP_SECURE_ERASE:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE_ZEROES:
 		r = true;
 		break;
@@ -1342,9 +1330,6 @@ static bool __process_abnormal_io(struct clone_info *ci, struct dm_target *ti,
 	case REQ_OP_SECURE_ERASE:
 		num_bios = ti->num_secure_erase_bios;
 		break;
-	case REQ_OP_WRITE_SAME:
-		num_bios = ti->num_write_same_bios;
-		break;
 	case REQ_OP_WRITE_ZEROES:
 		num_bios = ti->num_write_zeroes_bios;
 		break;
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index b26fecf6c8e87..721db99f4f630 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -316,12 +316,6 @@ struct dm_target {
 	 */
 	unsigned num_secure_erase_bios;
 
-	/*
-	 * The number of WRITE SAME bios that will be submitted to the target.
-	 * The bio number can be accessed with dm_bio_get_target_bio_nr.
-	 */
-	unsigned num_write_same_bios;
-
 	/*
 	 * The number of WRITE ZEROES bios that will be submitted to the target.
 	 * The bio number can be accessed with dm_bio_get_target_bio_nr.
-- 
2.30.2

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[Drbd-dev] [PATCH 6/7] dm: remove write same support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/md/dm-core.h          |  1 -
 drivers/md/dm-crypt.c         |  1 -
 drivers/md/dm-ebs-target.c    |  1 -
 drivers/md/dm-io.c            | 22 ++--------------------
 drivers/md/dm-linear.c        |  1 -
 drivers/md/dm-mpath.c         |  1 -
 drivers/md/dm-rq.c            |  3 ---
 drivers/md/dm-stripe.c        |  4 +---
 drivers/md/dm-table.c         | 29 -----------------------------
 drivers/md/dm-zone.c          |  4 ----
 drivers/md/dm.c               | 15 ---------------
 include/linux/device-mapper.h |  6 ------
 12 files changed, 3 insertions(+), 85 deletions(-)

diff --git a/drivers/md/dm-core.h b/drivers/md/dm-core.h
index 72d18c3fbf1f6..18b26882d25ac 100644
--- a/drivers/md/dm-core.h
+++ b/drivers/md/dm-core.h
@@ -140,7 +140,6 @@ struct mapped_device {
 #define DMF_EMULATE_ZONE_APPEND 9
 
 void disable_discard(struct mapped_device *md);
-void disable_write_same(struct mapped_device *md);
 void disable_write_zeroes(struct mapped_device *md);
 
 static inline sector_t dm_get_size(struct mapped_device *md)
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index a5006cb6ee8ad..e0e846a35947f 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1996,7 +1996,6 @@ static bool kcryptd_crypt_write_inline(struct crypt_config *cc,
 	 */
 	switch (bio_op(ctx->bio_in)) {
 	case REQ_OP_WRITE:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE_ZEROES:
 		return true;
 	default:
diff --git a/drivers/md/dm-ebs-target.c b/drivers/md/dm-ebs-target.c
index 7ce5d509b9403..0221fa63f888f 100644
--- a/drivers/md/dm-ebs-target.c
+++ b/drivers/md/dm-ebs-target.c
@@ -335,7 +335,6 @@ static int ebs_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
 	ti->num_secure_erase_bios = 0;
-	ti->num_write_same_bios = 0;
 	ti->num_write_zeroes_bios = 0;
 	return 0;
 bad:
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index 23e038f8dc845..0969aa39655a4 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -304,7 +304,6 @@ static void do_region(int op, int op_flags, unsigned region,
 	unsigned num_bvecs;
 	sector_t remaining = where->count;
 	struct request_queue *q = bdev_get_queue(where->bdev);
-	unsigned short logical_block_size = queue_logical_block_size(q);
 	sector_t num_sectors;
 	unsigned int special_cmd_max_sectors;
 
@@ -315,10 +314,8 @@ static void do_region(int op, int op_flags, unsigned region,
 		special_cmd_max_sectors = q->limits.max_discard_sectors;
 	else if (op == REQ_OP_WRITE_ZEROES)
 		special_cmd_max_sectors = q->limits.max_write_zeroes_sectors;
-	else if (op == REQ_OP_WRITE_SAME)
-		special_cmd_max_sectors = q->limits.max_write_same_sectors;
-	if ((op == REQ_OP_DISCARD || op == REQ_OP_WRITE_ZEROES ||
-	     op == REQ_OP_WRITE_SAME) && special_cmd_max_sectors == 0) {
+	if ((op == REQ_OP_DISCARD || op == REQ_OP_WRITE_ZEROES) &&
+	    special_cmd_max_sectors == 0) {
 		atomic_inc(&io->count);
 		dec_count(io, region, BLK_STS_NOTSUPP);
 		return;
@@ -337,9 +334,6 @@ static void do_region(int op, int op_flags, unsigned region,
 		case REQ_OP_WRITE_ZEROES:
 			num_bvecs = 0;
 			break;
-		case REQ_OP_WRITE_SAME:
-			num_bvecs = 1;
-			break;
 		default:
 			num_bvecs = bio_max_segs(dm_sector_div_up(remaining,
 						(PAGE_SIZE >> SECTOR_SHIFT)));
@@ -355,18 +349,6 @@ static void do_region(int op, int op_flags, unsigned region,
 			num_sectors = min_t(sector_t, special_cmd_max_sectors, remaining);
 			bio->bi_iter.bi_size = num_sectors << SECTOR_SHIFT;
 			remaining -= num_sectors;
-		} else if (op == REQ_OP_WRITE_SAME) {
-			/*
-			 * WRITE SAME only uses a single page.
-			 */
-			dp->get_page(dp, &page, &len, &offset);
-			bio_add_page(bio, page, logical_block_size, offset);
-			num_sectors = min_t(sector_t, special_cmd_max_sectors, remaining);
-			bio->bi_iter.bi_size = num_sectors << SECTOR_SHIFT;
-
-			offset = 0;
-			remaining -= num_sectors;
-			dp->next_page(dp);
 		} else while (remaining) {
 			/*
 			 * Try and add as many pages as possible.
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 1b97a11d71517..76b486e4d2be1 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -60,7 +60,6 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
 	ti->num_secure_erase_bios = 1;
-	ti->num_write_same_bios = 1;
 	ti->num_write_zeroes_bios = 1;
 	ti->private = lc;
 	return 0;
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index f4719b65e5e33..9ab971834a535 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1252,7 +1252,6 @@ static int multipath_ctr(struct dm_target *ti, unsigned argc, char **argv)
 
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
-	ti->num_write_same_bios = 1;
 	ti->num_write_zeroes_bios = 1;
 	if (m->queue_mode == DM_TYPE_BIO_BASED)
 		ti->per_io_data_size = multipath_per_bio_data_size();
diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c
index 579ab6183d4d8..3907950a0ddcc 100644
--- a/drivers/md/dm-rq.c
+++ b/drivers/md/dm-rq.c
@@ -217,9 +217,6 @@ static void dm_done(struct request *clone, blk_status_t error, bool mapped)
 		if (req_op(clone) == REQ_OP_DISCARD &&
 		    !clone->q->limits.max_discard_sectors)
 			disable_discard(tio->md);
-		else if (req_op(clone) == REQ_OP_WRITE_SAME &&
-			 !clone->q->limits.max_write_same_sectors)
-			disable_write_same(tio->md);
 		else if (req_op(clone) == REQ_OP_WRITE_ZEROES &&
 			 !clone->q->limits.max_write_zeroes_sectors)
 			disable_write_zeroes(tio->md);
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index e566115ec0bb8..c81d331d1afe9 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -157,7 +157,6 @@ static int stripe_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = stripes;
 	ti->num_discard_bios = stripes;
 	ti->num_secure_erase_bios = stripes;
-	ti->num_write_same_bios = stripes;
 	ti->num_write_zeroes_bios = stripes;
 
 	sc->chunk_size = chunk_size;
@@ -284,8 +283,7 @@ static int stripe_map(struct dm_target *ti, struct bio *bio)
 	}
 	if (unlikely(bio_op(bio) == REQ_OP_DISCARD) ||
 	    unlikely(bio_op(bio) == REQ_OP_SECURE_ERASE) ||
-	    unlikely(bio_op(bio) == REQ_OP_WRITE_ZEROES) ||
-	    unlikely(bio_op(bio) == REQ_OP_WRITE_SAME)) {
+	    unlikely(bio_op(bio) == REQ_OP_WRITE_ZEROES)) {
 		target_bio_nr = dm_bio_get_target_bio_nr(bio);
 		BUG_ON(target_bio_nr >= sc->stripes);
 		return stripe_map_range(sc, bio, target_bio_nr);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index e43096cfe9e22..88ab986379342 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1822,33 +1822,6 @@ static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
 	return !blk_queue_add_random(q);
 }
 
-static int device_not_write_same_capable(struct dm_target *ti, struct dm_dev *dev,
-					 sector_t start, sector_t len, void *data)
-{
-	struct request_queue *q = bdev_get_queue(dev->bdev);
-
-	return !q->limits.max_write_same_sectors;
-}
-
-static bool dm_table_supports_write_same(struct dm_table *t)
-{
-	struct dm_target *ti;
-	unsigned i;
-
-	for (i = 0; i < dm_table_get_num_targets(t); i++) {
-		ti = dm_table_get_target(t, i);
-
-		if (!ti->num_write_same_bios)
-			return false;
-
-		if (!ti->type->iterate_devices ||
-		    ti->type->iterate_devices(ti, device_not_write_same_capable, NULL))
-			return false;
-	}
-
-	return true;
-}
-
 static int device_not_write_zeroes_capable(struct dm_target *ti, struct dm_dev *dev,
 					   sector_t start, sector_t len, void *data)
 {
@@ -2027,8 +2000,6 @@ int dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 	else
 		blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
 
-	if (!dm_table_supports_write_same(t))
-		q->limits.max_write_same_sectors = 0;
 	if (!dm_table_supports_write_zeroes(t))
 		q->limits.max_write_zeroes_sectors = 0;
 
diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
index 6d82a34438c85..c1ca9be4b79e9 100644
--- a/drivers/md/dm-zone.c
+++ b/drivers/md/dm-zone.c
@@ -130,7 +130,6 @@ bool dm_is_zone_write(struct mapped_device *md, struct bio *bio)
 
 	switch (bio_op(bio)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		return !op_is_flush(bio->bi_opf) && bio_sectors(bio);
 	default:
@@ -390,7 +389,6 @@ static bool dm_zone_map_bio_begin(struct mapped_device *md,
 	case REQ_OP_ZONE_FINISH:
 		return true;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		/* Writes must be aligned to the zone write pointer */
 		if ((clone->bi_iter.bi_sector & (zsectors - 1)) != zwp_offset)
@@ -446,7 +444,6 @@ static blk_status_t dm_zone_map_bio_end(struct mapped_device *md,
 			   blk_queue_zone_sectors(md->queue));
 		return BLK_STS_OK;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		WRITE_ONCE(md->zwp_offset[zno], zwp_offset + nr_sectors);
 		return BLK_STS_OK;
@@ -503,7 +500,6 @@ static bool dm_need_zone_wp_tracking(struct bio *orig_bio)
 		return false;
 	switch (bio_op(orig_bio)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 	case REQ_OP_ZONE_RESET:
 	case REQ_OP_ZONE_FINISH:
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index ab9cc91931f99..028771f77aa04 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -856,14 +856,6 @@ void disable_discard(struct mapped_device *md)
 	blk_queue_flag_clear(QUEUE_FLAG_DISCARD, md->queue);
 }
 
-void disable_write_same(struct mapped_device *md)
-{
-	struct queue_limits *limits = dm_get_queue_limits(md);
-
-	/* device doesn't really support WRITE SAME, disable it */
-	limits->max_write_same_sectors = 0;
-}
-
 void disable_write_zeroes(struct mapped_device *md)
 {
 	struct queue_limits *limits = dm_get_queue_limits(md);
@@ -890,9 +882,6 @@ static void clone_endio(struct bio *bio)
 		if (bio_op(bio) == REQ_OP_DISCARD &&
 		    !q->limits.max_discard_sectors)
 			disable_discard(md);
-		else if (bio_op(bio) == REQ_OP_WRITE_SAME &&
-			 !q->limits.max_write_same_sectors)
-			disable_write_same(md);
 		else if (bio_op(bio) == REQ_OP_WRITE_ZEROES &&
 			 !q->limits.max_write_zeroes_sectors)
 			disable_write_zeroes(md);
@@ -1320,7 +1309,6 @@ static bool is_abnormal_io(struct bio *bio)
 	switch (bio_op(bio)) {
 	case REQ_OP_DISCARD:
 	case REQ_OP_SECURE_ERASE:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE_ZEROES:
 		r = true;
 		break;
@@ -1342,9 +1330,6 @@ static bool __process_abnormal_io(struct clone_info *ci, struct dm_target *ti,
 	case REQ_OP_SECURE_ERASE:
 		num_bios = ti->num_secure_erase_bios;
 		break;
-	case REQ_OP_WRITE_SAME:
-		num_bios = ti->num_write_same_bios;
-		break;
 	case REQ_OP_WRITE_ZEROES:
 		num_bios = ti->num_write_zeroes_bios;
 		break;
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index b26fecf6c8e87..721db99f4f630 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -316,12 +316,6 @@ struct dm_target {
 	 */
 	unsigned num_secure_erase_bios;
 
-	/*
-	 * The number of WRITE SAME bios that will be submitted to the target.
-	 * The bio number can be accessed with dm_bio_get_target_bio_nr.
-	 */
-	unsigned num_write_same_bios;
-
 	/*
 	 * The number of WRITE ZEROES bios that will be submitted to the target.
 	 * The bio number can be accessed with dm_bio_get_target_bio_nr.
-- 
2.30.2

[PATCH 6/7] dm: remove write same support

[Christoph Hellwig]

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/md/dm-core.h          |  1 -
 drivers/md/dm-crypt.c         |  1 -
 drivers/md/dm-ebs-target.c    |  1 -
 drivers/md/dm-io.c            | 22 ++--------------------
 drivers/md/dm-linear.c        |  1 -
 drivers/md/dm-mpath.c         |  1 -
 drivers/md/dm-rq.c            |  3 ---
 drivers/md/dm-stripe.c        |  4 +---
 drivers/md/dm-table.c         | 29 -----------------------------
 drivers/md/dm-zone.c          |  4 ----
 drivers/md/dm.c               | 15 ---------------
 include/linux/device-mapper.h |  6 ------
 12 files changed, 3 insertions(+), 85 deletions(-)

diff --git a/drivers/md/dm-core.h b/drivers/md/dm-core.h
index 72d18c3fbf1f6..18b26882d25ac 100644
--- a/drivers/md/dm-core.h
+++ b/drivers/md/dm-core.h
@@ -140,7 +140,6 @@ struct mapped_device {
 #define DMF_EMULATE_ZONE_APPEND 9
 
 void disable_discard(struct mapped_device *md);
-void disable_write_same(struct mapped_device *md);
 void disable_write_zeroes(struct mapped_device *md);
 
 static inline sector_t dm_get_size(struct mapped_device *md)
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index a5006cb6ee8ad..e0e846a35947f 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1996,7 +1996,6 @@ static bool kcryptd_crypt_write_inline(struct crypt_config *cc,
 	 */
 	switch (bio_op(ctx->bio_in)) {
 	case REQ_OP_WRITE:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE_ZEROES:
 		return true;
 	default:
diff --git a/drivers/md/dm-ebs-target.c b/drivers/md/dm-ebs-target.c
index 7ce5d509b9403..0221fa63f888f 100644
--- a/drivers/md/dm-ebs-target.c
+++ b/drivers/md/dm-ebs-target.c
@@ -335,7 +335,6 @@ static int ebs_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
 	ti->num_secure_erase_bios = 0;
-	ti->num_write_same_bios = 0;
 	ti->num_write_zeroes_bios = 0;
 	return 0;
 bad:
diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c
index 23e038f8dc845..0969aa39655a4 100644
--- a/drivers/md/dm-io.c
+++ b/drivers/md/dm-io.c
@@ -304,7 +304,6 @@ static void do_region(int op, int op_flags, unsigned region,
 	unsigned num_bvecs;
 	sector_t remaining = where->count;
 	struct request_queue *q = bdev_get_queue(where->bdev);
-	unsigned short logical_block_size = queue_logical_block_size(q);
 	sector_t num_sectors;
 	unsigned int special_cmd_max_sectors;
 
@@ -315,10 +314,8 @@ static void do_region(int op, int op_flags, unsigned region,
 		special_cmd_max_sectors = q->limits.max_discard_sectors;
 	else if (op == REQ_OP_WRITE_ZEROES)
 		special_cmd_max_sectors = q->limits.max_write_zeroes_sectors;
-	else if (op == REQ_OP_WRITE_SAME)
-		special_cmd_max_sectors = q->limits.max_write_same_sectors;
-	if ((op == REQ_OP_DISCARD || op == REQ_OP_WRITE_ZEROES ||
-	     op == REQ_OP_WRITE_SAME) && special_cmd_max_sectors == 0) {
+	if ((op == REQ_OP_DISCARD || op == REQ_OP_WRITE_ZEROES) &&
+	    special_cmd_max_sectors == 0) {
 		atomic_inc(&io->count);
 		dec_count(io, region, BLK_STS_NOTSUPP);
 		return;
@@ -337,9 +334,6 @@ static void do_region(int op, int op_flags, unsigned region,
 		case REQ_OP_WRITE_ZEROES:
 			num_bvecs = 0;
 			break;
-		case REQ_OP_WRITE_SAME:
-			num_bvecs = 1;
-			break;
 		default:
 			num_bvecs = bio_max_segs(dm_sector_div_up(remaining,
 						(PAGE_SIZE >> SECTOR_SHIFT)));
@@ -355,18 +349,6 @@ static void do_region(int op, int op_flags, unsigned region,
 			num_sectors = min_t(sector_t, special_cmd_max_sectors, remaining);
 			bio->bi_iter.bi_size = num_sectors << SECTOR_SHIFT;
 			remaining -= num_sectors;
-		} else if (op == REQ_OP_WRITE_SAME) {
-			/*
-			 * WRITE SAME only uses a single page.
-			 */
-			dp->get_page(dp, &page, &len, &offset);
-			bio_add_page(bio, page, logical_block_size, offset);
-			num_sectors = min_t(sector_t, special_cmd_max_sectors, remaining);
-			bio->bi_iter.bi_size = num_sectors << SECTOR_SHIFT;
-
-			offset = 0;
-			remaining -= num_sectors;
-			dp->next_page(dp);
 		} else while (remaining) {
 			/*
 			 * Try and add as many pages as possible.
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 1b97a11d71517..76b486e4d2be1 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -60,7 +60,6 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
 	ti->num_secure_erase_bios = 1;
-	ti->num_write_same_bios = 1;
 	ti->num_write_zeroes_bios = 1;
 	ti->private = lc;
 	return 0;
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index f4719b65e5e33..9ab971834a535 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1252,7 +1252,6 @@ static int multipath_ctr(struct dm_target *ti, unsigned argc, char **argv)
 
 	ti->num_flush_bios = 1;
 	ti->num_discard_bios = 1;
-	ti->num_write_same_bios = 1;
 	ti->num_write_zeroes_bios = 1;
 	if (m->queue_mode == DM_TYPE_BIO_BASED)
 		ti->per_io_data_size = multipath_per_bio_data_size();
diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c
index 579ab6183d4d8..3907950a0ddcc 100644
--- a/drivers/md/dm-rq.c
+++ b/drivers/md/dm-rq.c
@@ -217,9 +217,6 @@ static void dm_done(struct request *clone, blk_status_t error, bool mapped)
 		if (req_op(clone) == REQ_OP_DISCARD &&
 		    !clone->q->limits.max_discard_sectors)
 			disable_discard(tio->md);
-		else if (req_op(clone) == REQ_OP_WRITE_SAME &&
-			 !clone->q->limits.max_write_same_sectors)
-			disable_write_same(tio->md);
 		else if (req_op(clone) == REQ_OP_WRITE_ZEROES &&
 			 !clone->q->limits.max_write_zeroes_sectors)
 			disable_write_zeroes(tio->md);
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index e566115ec0bb8..c81d331d1afe9 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -157,7 +157,6 @@ static int stripe_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 	ti->num_flush_bios = stripes;
 	ti->num_discard_bios = stripes;
 	ti->num_secure_erase_bios = stripes;
-	ti->num_write_same_bios = stripes;
 	ti->num_write_zeroes_bios = stripes;
 
 	sc->chunk_size = chunk_size;
@@ -284,8 +283,7 @@ static int stripe_map(struct dm_target *ti, struct bio *bio)
 	}
 	if (unlikely(bio_op(bio) == REQ_OP_DISCARD) ||
 	    unlikely(bio_op(bio) == REQ_OP_SECURE_ERASE) ||
-	    unlikely(bio_op(bio) == REQ_OP_WRITE_ZEROES) ||
-	    unlikely(bio_op(bio) == REQ_OP_WRITE_SAME)) {
+	    unlikely(bio_op(bio) == REQ_OP_WRITE_ZEROES)) {
 		target_bio_nr = dm_bio_get_target_bio_nr(bio);
 		BUG_ON(target_bio_nr >= sc->stripes);
 		return stripe_map_range(sc, bio, target_bio_nr);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index e43096cfe9e22..88ab986379342 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1822,33 +1822,6 @@ static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
 	return !blk_queue_add_random(q);
 }
 
-static int device_not_write_same_capable(struct dm_target *ti, struct dm_dev *dev,
-					 sector_t start, sector_t len, void *data)
-{
-	struct request_queue *q = bdev_get_queue(dev->bdev);
-
-	return !q->limits.max_write_same_sectors;
-}
-
-static bool dm_table_supports_write_same(struct dm_table *t)
-{
-	struct dm_target *ti;
-	unsigned i;
-
-	for (i = 0; i < dm_table_get_num_targets(t); i++) {
-		ti = dm_table_get_target(t, i);
-
-		if (!ti->num_write_same_bios)
-			return false;
-
-		if (!ti->type->iterate_devices ||
-		    ti->type->iterate_devices(ti, device_not_write_same_capable, NULL))
-			return false;
-	}
-
-	return true;
-}
-
 static int device_not_write_zeroes_capable(struct dm_target *ti, struct dm_dev *dev,
 					   sector_t start, sector_t len, void *data)
 {
@@ -2027,8 +2000,6 @@ int dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 	else
 		blk_queue_flag_set(QUEUE_FLAG_NONROT, q);
 
-	if (!dm_table_supports_write_same(t))
-		q->limits.max_write_same_sectors = 0;
 	if (!dm_table_supports_write_zeroes(t))
 		q->limits.max_write_zeroes_sectors = 0;
 
diff --git a/drivers/md/dm-zone.c b/drivers/md/dm-zone.c
index 6d82a34438c85..c1ca9be4b79e9 100644
--- a/drivers/md/dm-zone.c
+++ b/drivers/md/dm-zone.c
@@ -130,7 +130,6 @@ bool dm_is_zone_write(struct mapped_device *md, struct bio *bio)
 
 	switch (bio_op(bio)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		return !op_is_flush(bio->bi_opf) && bio_sectors(bio);
 	default:
@@ -390,7 +389,6 @@ static bool dm_zone_map_bio_begin(struct mapped_device *md,
 	case REQ_OP_ZONE_FINISH:
 		return true;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		/* Writes must be aligned to the zone write pointer */
 		if ((clone->bi_iter.bi_sector & (zsectors - 1)) != zwp_offset)
@@ -446,7 +444,6 @@ static blk_status_t dm_zone_map_bio_end(struct mapped_device *md,
 			   blk_queue_zone_sectors(md->queue));
 		return BLK_STS_OK;
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		WRITE_ONCE(md->zwp_offset[zno], zwp_offset + nr_sectors);
 		return BLK_STS_OK;
@@ -503,7 +500,6 @@ static bool dm_need_zone_wp_tracking(struct bio *orig_bio)
 		return false;
 	switch (bio_op(orig_bio)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 	case REQ_OP_ZONE_RESET:
 	case REQ_OP_ZONE_FINISH:
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index ab9cc91931f99..028771f77aa04 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -856,14 +856,6 @@ void disable_discard(struct mapped_device *md)
 	blk_queue_flag_clear(QUEUE_FLAG_DISCARD, md->queue);
 }
 
-void disable_write_same(struct mapped_device *md)
-{
-	struct queue_limits *limits = dm_get_queue_limits(md);
-
-	/* device doesn't really support WRITE SAME, disable it */
-	limits->max_write_same_sectors = 0;
-}
-
 void disable_write_zeroes(struct mapped_device *md)
 {
 	struct queue_limits *limits = dm_get_queue_limits(md);
@@ -890,9 +882,6 @@ static void clone_endio(struct bio *bio)
 		if (bio_op(bio) == REQ_OP_DISCARD &&
 		    !q->limits.max_discard_sectors)
 			disable_discard(md);
-		else if (bio_op(bio) == REQ_OP_WRITE_SAME &&
-			 !q->limits.max_write_same_sectors)
-			disable_write_same(md);
 		else if (bio_op(bio) == REQ_OP_WRITE_ZEROES &&
 			 !q->limits.max_write_zeroes_sectors)
 			disable_write_zeroes(md);
@@ -1320,7 +1309,6 @@ static bool is_abnormal_io(struct bio *bio)
 	switch (bio_op(bio)) {
 	case REQ_OP_DISCARD:
 	case REQ_OP_SECURE_ERASE:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE_ZEROES:
 		r = true;
 		break;
@@ -1342,9 +1330,6 @@ static bool __process_abnormal_io(struct clone_info *ci, struct dm_target *ti,
 	case REQ_OP_SECURE_ERASE:
 		num_bios = ti->num_secure_erase_bios;
 		break;
-	case REQ_OP_WRITE_SAME:
-		num_bios = ti->num_write_same_bios;
-		break;
 	case REQ_OP_WRITE_ZEROES:
 		num_bios = ti->num_write_zeroes_bios;
 		break;
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index b26fecf6c8e87..721db99f4f630 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -316,12 +316,6 @@ struct dm_target {
 	 */
 	unsigned num_secure_erase_bios;
 
-	/*
-	 * The number of WRITE SAME bios that will be submitted to the target.
-	 * The bio number can be accessed with dm_bio_get_target_bio_nr.
-	 */
-	unsigned num_write_same_bios;
-
 	/*
 	 * The number of WRITE ZEROES bios that will be submitted to the target.
 	 * The bio number can be accessed with dm_bio_get_target_bio_nr.
-- 
2.30.2

Re: [dm-devel] [PATCH 6/7] dm: remove write same support

[Mike Snitzer]

On Wed, Feb 09 2022 at  3:28P -0500,
Christoph Hellwig <hch@lst.de> wrote:

> There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
> deleting it.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Thanks.

Reviewed-by: Mike Snitzer <snitzer@redhat.com>

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 6/7] dm: remove write same support

[Mike Snitzer]

On Wed, Feb 09 2022 at  3:28P -0500,
Christoph Hellwig <hch@lst.de> wrote:

> There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
> deleting it.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Thanks.

Reviewed-by: Mike Snitzer <snitzer@redhat.com>

Re: [PATCH 6/7] dm: remove write same support

[Mike Snitzer]

On Wed, Feb 09 2022 at  3:28P -0500,
Christoph Hellwig <hch@lst.de> wrote:

> There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
> deleting it.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Thanks.

Reviewed-by: Mike Snitzer <snitzer@redhat.com>

[dm-devel] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Christoph Hellwig]

No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
so remove the infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-core.c          | 13 +-----
 block/blk-lib.c           | 91 ---------------------------------------
 block/blk-merge.c         | 40 -----------------
 block/blk-settings.c      | 16 -------
 block/blk-sysfs.c         |  8 ----
 block/blk-zoned.c         |  1 -
 block/blk.h               |  1 -
 block/bounce.c            |  3 --
 include/linux/bio.h       |  3 --
 include/linux/blk_types.h |  2 -
 include/linux/blkdev.h    | 19 --------
 kernel/trace/blktrace.c   |  1 -
 12 files changed, 1 insertion(+), 197 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index be8812f5489d4..dabc771538db8 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -122,7 +122,6 @@ static const char *const blk_op_name[] = {
 	REQ_OP_NAME(ZONE_CLOSE),
 	REQ_OP_NAME(ZONE_FINISH),
 	REQ_OP_NAME(ZONE_APPEND),
-	REQ_OP_NAME(WRITE_SAME),
 	REQ_OP_NAME(WRITE_ZEROES),
 	REQ_OP_NAME(DRV_IN),
 	REQ_OP_NAME(DRV_OUT),
@@ -735,10 +734,6 @@ noinline_for_stack bool submit_bio_checks(struct bio *bio)
 		if (!blk_queue_secure_erase(q))
 			goto not_supported;
 		break;
-	case REQ_OP_WRITE_SAME:
-		if (!q->limits.max_write_same_sectors)
-			goto not_supported;
-		break;
 	case REQ_OP_ZONE_APPEND:
 		status = blk_check_zone_append(q, bio);
 		if (status != BLK_STS_OK)
@@ -934,13 +929,7 @@ void submit_bio(struct bio *bio)
 	 * go through the normal accounting stuff before submission.
 	 */
 	if (bio_has_data(bio)) {
-		unsigned int count;
-
-		if (unlikely(bio_op(bio) == REQ_OP_WRITE_SAME))
-			count = queue_logical_block_size(
-					bdev_get_queue(bio->bi_bdev)) >> 9;
-		else
-			count = bio_sectors(bio);
+		unsigned int count = bio_sectors(bio);
 
 		if (op_is_write(bio_op(bio))) {
 			count_vm_events(PGPGOUT, count);
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 1b8ced45e4e55..05d3dbfe24eaa 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -135,97 +135,6 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 }
 EXPORT_SYMBOL(blkdev_issue_discard);
 
-/**
- * __blkdev_issue_write_same - generate number of bios with same page
- * @bdev:	target blockdev
- * @sector:	start sector
- * @nr_sects:	number of sectors to write
- * @gfp_mask:	memory allocation flags (for bio_alloc)
- * @page:	page containing data to write
- * @biop:	pointer to anchor bio
- *
- * Description:
- *  Generate and issue number of bios(REQ_OP_WRITE_SAME) with same page.
- */
-static int __blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-		sector_t nr_sects, gfp_t gfp_mask, struct page *page,
-		struct bio **biop)
-{
-	struct request_queue *q = bdev_get_queue(bdev);
-	unsigned int max_write_same_sectors;
-	struct bio *bio = *biop;
-	sector_t bs_mask;
-
-	if (!q)
-		return -ENXIO;
-
-	if (bdev_read_only(bdev))
-		return -EPERM;
-
-	bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
-	if ((sector | nr_sects) & bs_mask)
-		return -EINVAL;
-
-	if (!bdev_write_same(bdev))
-		return -EOPNOTSUPP;
-
-	/* Ensure that max_write_same_sectors doesn't overflow bi_size */
-	max_write_same_sectors = bio_allowed_max_sectors(q);
-
-	while (nr_sects) {
-		bio = blk_next_bio(bio, bdev, 1, REQ_OP_WRITE_SAME, gfp_mask);
-		bio->bi_iter.bi_sector = sector;
-		bio->bi_vcnt = 1;
-		bio->bi_io_vec->bv_page = page;
-		bio->bi_io_vec->bv_offset = 0;
-		bio->bi_io_vec->bv_len = bdev_logical_block_size(bdev);
-
-		if (nr_sects > max_write_same_sectors) {
-			bio->bi_iter.bi_size = max_write_same_sectors << 9;
-			nr_sects -= max_write_same_sectors;
-			sector += max_write_same_sectors;
-		} else {
-			bio->bi_iter.bi_size = nr_sects << 9;
-			nr_sects = 0;
-		}
-		cond_resched();
-	}
-
-	*biop = bio;
-	return 0;
-}
-
-/**
- * blkdev_issue_write_same - queue a write same operation
- * @bdev:	target blockdev
- * @sector:	start sector
- * @nr_sects:	number of sectors to write
- * @gfp_mask:	memory allocation flags (for bio_alloc)
- * @page:	page containing data
- *
- * Description:
- *    Issue a write same request for the sectors in question.
- */
-int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-				sector_t nr_sects, gfp_t gfp_mask,
-				struct page *page)
-{
-	struct bio *bio = NULL;
-	struct blk_plug plug;
-	int ret;
-
-	blk_start_plug(&plug);
-	ret = __blkdev_issue_write_same(bdev, sector, nr_sects, gfp_mask, page,
-			&bio);
-	if (ret == 0 && bio) {
-		ret = submit_bio_wait(bio);
-		bio_put(bio);
-	}
-	blk_finish_plug(&plug);
-	return ret;
-}
-EXPORT_SYMBOL(blkdev_issue_write_same);
-
 static int __blkdev_issue_write_zeroes(struct block_device *bdev,
 		sector_t sector, sector_t nr_sects, gfp_t gfp_mask,
 		struct bio **biop, unsigned flags)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 4de34a332c9fd..87cee7e82ae15 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -152,22 +152,6 @@ static struct bio *blk_bio_write_zeroes_split(struct request_queue *q,
 	return bio_split(bio, q->limits.max_write_zeroes_sectors, GFP_NOIO, bs);
 }
 
-static struct bio *blk_bio_write_same_split(struct request_queue *q,
-					    struct bio *bio,
-					    struct bio_set *bs,
-					    unsigned *nsegs)
-{
-	*nsegs = 1;
-
-	if (!q->limits.max_write_same_sectors)
-		return NULL;
-
-	if (bio_sectors(bio) <= q->limits.max_write_same_sectors)
-		return NULL;
-
-	return bio_split(bio, q->limits.max_write_same_sectors, GFP_NOIO, bs);
-}
-
 /*
  * Return the maximum number of sectors from the start of a bio that may be
  * submitted as a single request to a block device. If enough sectors remain,
@@ -351,10 +335,6 @@ void __blk_queue_split(struct request_queue *q, struct bio **bio,
 		split = blk_bio_write_zeroes_split(q, *bio, &q->bio_split,
 				nr_segs);
 		break;
-	case REQ_OP_WRITE_SAME:
-		split = blk_bio_write_same_split(q, *bio, &q->bio_split,
-				nr_segs);
-		break;
 	default:
 		split = blk_bio_segment_split(q, *bio, &q->bio_split, nr_segs);
 		break;
@@ -416,8 +396,6 @@ unsigned int blk_recalc_rq_segments(struct request *rq)
 		return 1;
 	case REQ_OP_WRITE_ZEROES:
 		return 0;
-	case REQ_OP_WRITE_SAME:
-		return 1;
 	}
 
 	rq_for_each_bvec(bv, rq, iter)
@@ -555,8 +533,6 @@ int __blk_rq_map_sg(struct request_queue *q, struct request *rq,
 
 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
 		nsegs = __blk_bvec_map_sg(rq->special_vec, sglist, last_sg);
-	else if (rq->bio && bio_op(rq->bio) == REQ_OP_WRITE_SAME)
-		nsegs = __blk_bvec_map_sg(bio_iovec(rq->bio), sglist, last_sg);
 	else if (rq->bio)
 		nsegs = __blk_bios_map_sg(q, rq->bio, sglist, last_sg);
 
@@ -757,13 +733,6 @@ static enum elv_merge blk_try_req_merge(struct request *req,
 	return ELEVATOR_NO_MERGE;
 }
 
-static inline bool blk_write_same_mergeable(struct bio *a, struct bio *b)
-{
-	if (bio_page(a) == bio_page(b) && bio_offset(a) == bio_offset(b))
-		return true;
-	return false;
-}
-
 /*
  * For non-mq, this has to be called with the request spinlock acquired.
  * For mq with scheduling, the appropriate queue wide lock should be held.
@@ -780,10 +749,6 @@ static struct request *attempt_merge(struct request_queue *q,
 	if (rq_data_dir(req) != rq_data_dir(next))
 		return NULL;
 
-	if (req_op(req) == REQ_OP_WRITE_SAME &&
-	    !blk_write_same_mergeable(req->bio, next->bio))
-		return NULL;
-
 	/*
 	 * Don't allow merge of different write hints, or for a hint with
 	 * non-hint IO.
@@ -912,11 +877,6 @@ bool blk_rq_merge_ok(struct request *rq, struct bio *bio)
 	if (!bio_crypt_rq_ctx_compatible(rq, bio))
 		return false;
 
-	/* must be using the same buffer */
-	if (req_op(rq) == REQ_OP_WRITE_SAME &&
-	    !blk_write_same_mergeable(rq->bio, bio))
-		return false;
-
 	/*
 	 * Don't allow merge of different write hints, or for a hint with
 	 * non-hint IO.
diff --git a/block/blk-settings.c b/block/blk-settings.c
index b880c70e22e4e..b83df3d2eebca 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -42,7 +42,6 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->max_sectors = lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS;
 	lim->max_dev_sectors = 0;
 	lim->chunk_sectors = 0;
-	lim->max_write_same_sectors = 0;
 	lim->max_write_zeroes_sectors = 0;
 	lim->max_zone_append_sectors = 0;
 	lim->max_discard_sectors = 0;
@@ -79,7 +78,6 @@ void blk_set_stacking_limits(struct queue_limits *lim)
 	lim->max_segment_size = UINT_MAX;
 	lim->max_sectors = UINT_MAX;
 	lim->max_dev_sectors = UINT_MAX;
-	lim->max_write_same_sectors = UINT_MAX;
 	lim->max_write_zeroes_sectors = UINT_MAX;
 	lim->max_zone_append_sectors = UINT_MAX;
 }
@@ -178,18 +176,6 @@ void blk_queue_max_discard_sectors(struct request_queue *q,
 }
 EXPORT_SYMBOL(blk_queue_max_discard_sectors);
 
-/**
- * blk_queue_max_write_same_sectors - set max sectors for a single write same
- * @q:  the request queue for the device
- * @max_write_same_sectors: maximum number of sectors to write per command
- **/
-void blk_queue_max_write_same_sectors(struct request_queue *q,
-				      unsigned int max_write_same_sectors)
-{
-	q->limits.max_write_same_sectors = max_write_same_sectors;
-}
-EXPORT_SYMBOL(blk_queue_max_write_same_sectors);
-
 /**
  * blk_queue_max_write_zeroes_sectors - set max sectors for a single
  *                                      write zeroes
@@ -519,8 +505,6 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
 	t->max_dev_sectors = min_not_zero(t->max_dev_sectors, b->max_dev_sectors);
-	t->max_write_same_sectors = min(t->max_write_same_sectors,
-					b->max_write_same_sectors);
 	t->max_write_zeroes_sectors = min(t->max_write_zeroes_sectors,
 					b->max_write_zeroes_sectors);
 	t->max_zone_append_sectors = min(t->max_zone_append_sectors,
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 9f32882ceb2f6..4a5bb47bee3ce 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -212,12 +212,6 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
 	return queue_var_show(0, page);
 }
 
-static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
-{
-	return sprintf(page, "%llu\n",
-		(unsigned long long)q->limits.max_write_same_sectors << 9);
-}
-
 static ssize_t queue_write_zeroes_max_show(struct request_queue *q, char *page)
 {
 	return sprintf(page, "%llu\n",
@@ -587,7 +581,6 @@ QUEUE_RO_ENTRY(queue_discard_max_hw, "discard_max_hw_bytes");
 QUEUE_RW_ENTRY(queue_discard_max, "discard_max_bytes");
 QUEUE_RO_ENTRY(queue_discard_zeroes_data, "discard_zeroes_data");
 
-QUEUE_RO_ENTRY(queue_write_same_max, "write_same_max_bytes");
 QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_write_granularity, "zone_write_granularity");
@@ -643,7 +636,6 @@ static struct attribute *queue_attrs[] = {
 	&queue_discard_max_entry.attr,
 	&queue_discard_max_hw_entry.attr,
 	&queue_discard_zeroes_data_entry.attr,
-	&queue_write_same_max_entry.attr,
 	&queue_write_zeroes_max_entry.attr,
 	&queue_zone_append_max_entry.attr,
 	&queue_zone_write_granularity_entry.attr,
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 602bef54c8134..38cd840d88387 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -65,7 +65,6 @@ bool blk_req_needs_zone_write_lock(struct request *rq)
 
 	switch (req_op(rq)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		return blk_rq_zone_is_seq(rq);
 	default:
diff --git a/block/blk.h b/block/blk.h
index abb663a2a147b..2fe483bcc6d38 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -286,7 +286,6 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
 	case REQ_OP_DISCARD:
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 		return true; /* non-trivial splitting decisions */
 	default:
 		break;
diff --git a/block/bounce.c b/block/bounce.c
index 3fd3bc6fd5dbb..d9df1788c440c 100644
--- a/block/bounce.c
+++ b/block/bounce.c
@@ -178,9 +178,6 @@ static struct bio *bounce_clone_bio(struct bio *bio_src)
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
 		break;
-	case REQ_OP_WRITE_SAME:
-		bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
-		break;
 	default:
 		bio_for_each_segment(bv, bio_src, iter)
 			bio->bi_io_vec[bio->bi_vcnt++] = bv;
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 7523aba4ddf7c..74bf16558ef4b 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -65,7 +65,6 @@ static inline bool bio_no_advance_iter(const struct bio *bio)
 {
 	return bio_op(bio) == REQ_OP_DISCARD ||
 	       bio_op(bio) == REQ_OP_SECURE_ERASE ||
-	       bio_op(bio) == REQ_OP_WRITE_SAME ||
 	       bio_op(bio) == REQ_OP_WRITE_ZEROES;
 }
 
@@ -186,8 +185,6 @@ static inline unsigned bio_segments(struct bio *bio)
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
 		return 0;
-	case REQ_OP_WRITE_SAME:
-		return 1;
 	default:
 		break;
 	}
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 5561e58d158ac..e72cb45593fbe 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -361,8 +361,6 @@ enum req_opf {
 	REQ_OP_DISCARD		= 3,
 	/* securely erase sectors */
 	REQ_OP_SECURE_ERASE	= 5,
-	/* write the same sector many times */
-	REQ_OP_WRITE_SAME	= 7,
 	/* write the zero filled sector many times */
 	REQ_OP_WRITE_ZEROES	= 9,
 	/* Open a zone */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3bfc75a2a4509..b92345c044991 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -247,7 +247,6 @@ struct queue_limits {
 	unsigned int		io_opt;
 	unsigned int		max_discard_sectors;
 	unsigned int		max_hw_discard_sectors;
-	unsigned int		max_write_same_sectors;
 	unsigned int		max_write_zeroes_sectors;
 	unsigned int		max_zone_append_sectors;
 	unsigned int		discard_granularity;
@@ -913,9 +912,6 @@ static inline unsigned int blk_queue_get_max_sectors(struct request_queue *q,
 		return min(q->limits.max_discard_sectors,
 			   UINT_MAX >> SECTOR_SHIFT);
 
-	if (unlikely(op == REQ_OP_WRITE_SAME))
-		return q->limits.max_write_same_sectors;
-
 	if (unlikely(op == REQ_OP_WRITE_ZEROES))
 		return q->limits.max_write_zeroes_sectors;
 
@@ -958,8 +954,6 @@ extern void blk_queue_max_discard_segments(struct request_queue *,
 extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
 extern void blk_queue_max_discard_sectors(struct request_queue *q,
 		unsigned int max_discard_sectors);
-extern void blk_queue_max_write_same_sectors(struct request_queue *q,
-		unsigned int max_write_same_sectors);
 extern void blk_queue_max_write_zeroes_sectors(struct request_queue *q,
 		unsigned int max_write_same_sectors);
 extern void blk_queue_logical_block_size(struct request_queue *, unsigned int);
@@ -1096,9 +1090,6 @@ static inline long nr_blockdev_pages(void)
 
 extern void blk_io_schedule(void);
 
-extern int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-		sector_t nr_sects, gfp_t gfp_mask, struct page *page);
-
 #define BLKDEV_DISCARD_SECURE	(1 << 0)	/* issue a secure erase */
 
 extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
@@ -1325,16 +1316,6 @@ static inline int bdev_discard_alignment(struct block_device *bdev)
 	return q->limits.discard_alignment;
 }
 
-static inline unsigned int bdev_write_same(struct block_device *bdev)
-{
-	struct request_queue *q = bdev_get_queue(bdev);
-
-	if (q)
-		return q->limits.max_write_same_sectors;
-
-	return 0;
-}
-
 static inline unsigned int bdev_write_zeroes_sectors(struct block_device *bdev)
 {
 	struct request_queue *q = bdev_get_queue(bdev);
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index af68a67179b48..19514edc44f71 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1892,7 +1892,6 @@ void blk_fill_rwbs(char *rwbs, unsigned int op)
 
 	switch (op & REQ_OP_MASK) {
 	case REQ_OP_WRITE:
-	case REQ_OP_WRITE_SAME:
 		rwbs[i++] = 'W';
 		break;
 	case REQ_OP_DISCARD:
-- 
2.30.2

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

[Drbd-dev] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Christoph Hellwig]

No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
so remove the infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-core.c          | 13 +-----
 block/blk-lib.c           | 91 ---------------------------------------
 block/blk-merge.c         | 40 -----------------
 block/blk-settings.c      | 16 -------
 block/blk-sysfs.c         |  8 ----
 block/blk-zoned.c         |  1 -
 block/blk.h               |  1 -
 block/bounce.c            |  3 --
 include/linux/bio.h       |  3 --
 include/linux/blk_types.h |  2 -
 include/linux/blkdev.h    | 19 --------
 kernel/trace/blktrace.c   |  1 -
 12 files changed, 1 insertion(+), 197 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index be8812f5489d4..dabc771538db8 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -122,7 +122,6 @@ static const char *const blk_op_name[] = {
 	REQ_OP_NAME(ZONE_CLOSE),
 	REQ_OP_NAME(ZONE_FINISH),
 	REQ_OP_NAME(ZONE_APPEND),
-	REQ_OP_NAME(WRITE_SAME),
 	REQ_OP_NAME(WRITE_ZEROES),
 	REQ_OP_NAME(DRV_IN),
 	REQ_OP_NAME(DRV_OUT),
@@ -735,10 +734,6 @@ noinline_for_stack bool submit_bio_checks(struct bio *bio)
 		if (!blk_queue_secure_erase(q))
 			goto not_supported;
 		break;
-	case REQ_OP_WRITE_SAME:
-		if (!q->limits.max_write_same_sectors)
-			goto not_supported;
-		break;
 	case REQ_OP_ZONE_APPEND:
 		status = blk_check_zone_append(q, bio);
 		if (status != BLK_STS_OK)
@@ -934,13 +929,7 @@ void submit_bio(struct bio *bio)
 	 * go through the normal accounting stuff before submission.
 	 */
 	if (bio_has_data(bio)) {
-		unsigned int count;
-
-		if (unlikely(bio_op(bio) == REQ_OP_WRITE_SAME))
-			count = queue_logical_block_size(
-					bdev_get_queue(bio->bi_bdev)) >> 9;
-		else
-			count = bio_sectors(bio);
+		unsigned int count = bio_sectors(bio);
 
 		if (op_is_write(bio_op(bio))) {
 			count_vm_events(PGPGOUT, count);
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 1b8ced45e4e55..05d3dbfe24eaa 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -135,97 +135,6 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 }
 EXPORT_SYMBOL(blkdev_issue_discard);
 
-/**
- * __blkdev_issue_write_same - generate number of bios with same page
- * @bdev:	target blockdev
- * @sector:	start sector
- * @nr_sects:	number of sectors to write
- * @gfp_mask:	memory allocation flags (for bio_alloc)
- * @page:	page containing data to write
- * @biop:	pointer to anchor bio
- *
- * Description:
- *  Generate and issue number of bios(REQ_OP_WRITE_SAME) with same page.
- */
-static int __blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-		sector_t nr_sects, gfp_t gfp_mask, struct page *page,
-		struct bio **biop)
-{
-	struct request_queue *q = bdev_get_queue(bdev);
-	unsigned int max_write_same_sectors;
-	struct bio *bio = *biop;
-	sector_t bs_mask;
-
-	if (!q)
-		return -ENXIO;
-
-	if (bdev_read_only(bdev))
-		return -EPERM;
-
-	bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
-	if ((sector | nr_sects) & bs_mask)
-		return -EINVAL;
-
-	if (!bdev_write_same(bdev))
-		return -EOPNOTSUPP;
-
-	/* Ensure that max_write_same_sectors doesn't overflow bi_size */
-	max_write_same_sectors = bio_allowed_max_sectors(q);
-
-	while (nr_sects) {
-		bio = blk_next_bio(bio, bdev, 1, REQ_OP_WRITE_SAME, gfp_mask);
-		bio->bi_iter.bi_sector = sector;
-		bio->bi_vcnt = 1;
-		bio->bi_io_vec->bv_page = page;
-		bio->bi_io_vec->bv_offset = 0;
-		bio->bi_io_vec->bv_len = bdev_logical_block_size(bdev);
-
-		if (nr_sects > max_write_same_sectors) {
-			bio->bi_iter.bi_size = max_write_same_sectors << 9;
-			nr_sects -= max_write_same_sectors;
-			sector += max_write_same_sectors;
-		} else {
-			bio->bi_iter.bi_size = nr_sects << 9;
-			nr_sects = 0;
-		}
-		cond_resched();
-	}
-
-	*biop = bio;
-	return 0;
-}
-
-/**
- * blkdev_issue_write_same - queue a write same operation
- * @bdev:	target blockdev
- * @sector:	start sector
- * @nr_sects:	number of sectors to write
- * @gfp_mask:	memory allocation flags (for bio_alloc)
- * @page:	page containing data
- *
- * Description:
- *    Issue a write same request for the sectors in question.
- */
-int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-				sector_t nr_sects, gfp_t gfp_mask,
-				struct page *page)
-{
-	struct bio *bio = NULL;
-	struct blk_plug plug;
-	int ret;
-
-	blk_start_plug(&plug);
-	ret = __blkdev_issue_write_same(bdev, sector, nr_sects, gfp_mask, page,
-			&bio);
-	if (ret == 0 && bio) {
-		ret = submit_bio_wait(bio);
-		bio_put(bio);
-	}
-	blk_finish_plug(&plug);
-	return ret;
-}
-EXPORT_SYMBOL(blkdev_issue_write_same);
-
 static int __blkdev_issue_write_zeroes(struct block_device *bdev,
 		sector_t sector, sector_t nr_sects, gfp_t gfp_mask,
 		struct bio **biop, unsigned flags)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 4de34a332c9fd..87cee7e82ae15 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -152,22 +152,6 @@ static struct bio *blk_bio_write_zeroes_split(struct request_queue *q,
 	return bio_split(bio, q->limits.max_write_zeroes_sectors, GFP_NOIO, bs);
 }
 
-static struct bio *blk_bio_write_same_split(struct request_queue *q,
-					    struct bio *bio,
-					    struct bio_set *bs,
-					    unsigned *nsegs)
-{
-	*nsegs = 1;
-
-	if (!q->limits.max_write_same_sectors)
-		return NULL;
-
-	if (bio_sectors(bio) <= q->limits.max_write_same_sectors)
-		return NULL;
-
-	return bio_split(bio, q->limits.max_write_same_sectors, GFP_NOIO, bs);
-}
-
 /*
  * Return the maximum number of sectors from the start of a bio that may be
  * submitted as a single request to a block device. If enough sectors remain,
@@ -351,10 +335,6 @@ void __blk_queue_split(struct request_queue *q, struct bio **bio,
 		split = blk_bio_write_zeroes_split(q, *bio, &q->bio_split,
 				nr_segs);
 		break;
-	case REQ_OP_WRITE_SAME:
-		split = blk_bio_write_same_split(q, *bio, &q->bio_split,
-				nr_segs);
-		break;
 	default:
 		split = blk_bio_segment_split(q, *bio, &q->bio_split, nr_segs);
 		break;
@@ -416,8 +396,6 @@ unsigned int blk_recalc_rq_segments(struct request *rq)
 		return 1;
 	case REQ_OP_WRITE_ZEROES:
 		return 0;
-	case REQ_OP_WRITE_SAME:
-		return 1;
 	}
 
 	rq_for_each_bvec(bv, rq, iter)
@@ -555,8 +533,6 @@ int __blk_rq_map_sg(struct request_queue *q, struct request *rq,
 
 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
 		nsegs = __blk_bvec_map_sg(rq->special_vec, sglist, last_sg);
-	else if (rq->bio && bio_op(rq->bio) == REQ_OP_WRITE_SAME)
-		nsegs = __blk_bvec_map_sg(bio_iovec(rq->bio), sglist, last_sg);
 	else if (rq->bio)
 		nsegs = __blk_bios_map_sg(q, rq->bio, sglist, last_sg);
 
@@ -757,13 +733,6 @@ static enum elv_merge blk_try_req_merge(struct request *req,
 	return ELEVATOR_NO_MERGE;
 }
 
-static inline bool blk_write_same_mergeable(struct bio *a, struct bio *b)
-{
-	if (bio_page(a) == bio_page(b) && bio_offset(a) == bio_offset(b))
-		return true;
-	return false;
-}
-
 /*
  * For non-mq, this has to be called with the request spinlock acquired.
  * For mq with scheduling, the appropriate queue wide lock should be held.
@@ -780,10 +749,6 @@ static struct request *attempt_merge(struct request_queue *q,
 	if (rq_data_dir(req) != rq_data_dir(next))
 		return NULL;
 
-	if (req_op(req) == REQ_OP_WRITE_SAME &&
-	    !blk_write_same_mergeable(req->bio, next->bio))
-		return NULL;
-
 	/*
 	 * Don't allow merge of different write hints, or for a hint with
 	 * non-hint IO.
@@ -912,11 +877,6 @@ bool blk_rq_merge_ok(struct request *rq, struct bio *bio)
 	if (!bio_crypt_rq_ctx_compatible(rq, bio))
 		return false;
 
-	/* must be using the same buffer */
-	if (req_op(rq) == REQ_OP_WRITE_SAME &&
-	    !blk_write_same_mergeable(rq->bio, bio))
-		return false;
-
 	/*
 	 * Don't allow merge of different write hints, or for a hint with
 	 * non-hint IO.
diff --git a/block/blk-settings.c b/block/blk-settings.c
index b880c70e22e4e..b83df3d2eebca 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -42,7 +42,6 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->max_sectors = lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS;
 	lim->max_dev_sectors = 0;
 	lim->chunk_sectors = 0;
-	lim->max_write_same_sectors = 0;
 	lim->max_write_zeroes_sectors = 0;
 	lim->max_zone_append_sectors = 0;
 	lim->max_discard_sectors = 0;
@@ -79,7 +78,6 @@ void blk_set_stacking_limits(struct queue_limits *lim)
 	lim->max_segment_size = UINT_MAX;
 	lim->max_sectors = UINT_MAX;
 	lim->max_dev_sectors = UINT_MAX;
-	lim->max_write_same_sectors = UINT_MAX;
 	lim->max_write_zeroes_sectors = UINT_MAX;
 	lim->max_zone_append_sectors = UINT_MAX;
 }
@@ -178,18 +176,6 @@ void blk_queue_max_discard_sectors(struct request_queue *q,
 }
 EXPORT_SYMBOL(blk_queue_max_discard_sectors);
 
-/**
- * blk_queue_max_write_same_sectors - set max sectors for a single write same
- * @q:  the request queue for the device
- * @max_write_same_sectors: maximum number of sectors to write per command
- **/
-void blk_queue_max_write_same_sectors(struct request_queue *q,
-				      unsigned int max_write_same_sectors)
-{
-	q->limits.max_write_same_sectors = max_write_same_sectors;
-}
-EXPORT_SYMBOL(blk_queue_max_write_same_sectors);
-
 /**
  * blk_queue_max_write_zeroes_sectors - set max sectors for a single
  *                                      write zeroes
@@ -519,8 +505,6 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
 	t->max_dev_sectors = min_not_zero(t->max_dev_sectors, b->max_dev_sectors);
-	t->max_write_same_sectors = min(t->max_write_same_sectors,
-					b->max_write_same_sectors);
 	t->max_write_zeroes_sectors = min(t->max_write_zeroes_sectors,
 					b->max_write_zeroes_sectors);
 	t->max_zone_append_sectors = min(t->max_zone_append_sectors,
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 9f32882ceb2f6..4a5bb47bee3ce 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -212,12 +212,6 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
 	return queue_var_show(0, page);
 }
 
-static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
-{
-	return sprintf(page, "%llu\n",
-		(unsigned long long)q->limits.max_write_same_sectors << 9);
-}
-
 static ssize_t queue_write_zeroes_max_show(struct request_queue *q, char *page)
 {
 	return sprintf(page, "%llu\n",
@@ -587,7 +581,6 @@ QUEUE_RO_ENTRY(queue_discard_max_hw, "discard_max_hw_bytes");
 QUEUE_RW_ENTRY(queue_discard_max, "discard_max_bytes");
 QUEUE_RO_ENTRY(queue_discard_zeroes_data, "discard_zeroes_data");
 
-QUEUE_RO_ENTRY(queue_write_same_max, "write_same_max_bytes");
 QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_write_granularity, "zone_write_granularity");
@@ -643,7 +636,6 @@ static struct attribute *queue_attrs[] = {
 	&queue_discard_max_entry.attr,
 	&queue_discard_max_hw_entry.attr,
 	&queue_discard_zeroes_data_entry.attr,
-	&queue_write_same_max_entry.attr,
 	&queue_write_zeroes_max_entry.attr,
 	&queue_zone_append_max_entry.attr,
 	&queue_zone_write_granularity_entry.attr,
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 602bef54c8134..38cd840d88387 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -65,7 +65,6 @@ bool blk_req_needs_zone_write_lock(struct request *rq)
 
 	switch (req_op(rq)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		return blk_rq_zone_is_seq(rq);
 	default:
diff --git a/block/blk.h b/block/blk.h
index abb663a2a147b..2fe483bcc6d38 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -286,7 +286,6 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
 	case REQ_OP_DISCARD:
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 		return true; /* non-trivial splitting decisions */
 	default:
 		break;
diff --git a/block/bounce.c b/block/bounce.c
index 3fd3bc6fd5dbb..d9df1788c440c 100644
--- a/block/bounce.c
+++ b/block/bounce.c
@@ -178,9 +178,6 @@ static struct bio *bounce_clone_bio(struct bio *bio_src)
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
 		break;
-	case REQ_OP_WRITE_SAME:
-		bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
-		break;
 	default:
 		bio_for_each_segment(bv, bio_src, iter)
 			bio->bi_io_vec[bio->bi_vcnt++] = bv;
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 7523aba4ddf7c..74bf16558ef4b 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -65,7 +65,6 @@ static inline bool bio_no_advance_iter(const struct bio *bio)
 {
 	return bio_op(bio) == REQ_OP_DISCARD ||
 	       bio_op(bio) == REQ_OP_SECURE_ERASE ||
-	       bio_op(bio) == REQ_OP_WRITE_SAME ||
 	       bio_op(bio) == REQ_OP_WRITE_ZEROES;
 }
 
@@ -186,8 +185,6 @@ static inline unsigned bio_segments(struct bio *bio)
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
 		return 0;
-	case REQ_OP_WRITE_SAME:
-		return 1;
 	default:
 		break;
 	}
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 5561e58d158ac..e72cb45593fbe 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -361,8 +361,6 @@ enum req_opf {
 	REQ_OP_DISCARD		= 3,
 	/* securely erase sectors */
 	REQ_OP_SECURE_ERASE	= 5,
-	/* write the same sector many times */
-	REQ_OP_WRITE_SAME	= 7,
 	/* write the zero filled sector many times */
 	REQ_OP_WRITE_ZEROES	= 9,
 	/* Open a zone */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3bfc75a2a4509..b92345c044991 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -247,7 +247,6 @@ struct queue_limits {
 	unsigned int		io_opt;
 	unsigned int		max_discard_sectors;
 	unsigned int		max_hw_discard_sectors;
-	unsigned int		max_write_same_sectors;
 	unsigned int		max_write_zeroes_sectors;
 	unsigned int		max_zone_append_sectors;
 	unsigned int		discard_granularity;
@@ -913,9 +912,6 @@ static inline unsigned int blk_queue_get_max_sectors(struct request_queue *q,
 		return min(q->limits.max_discard_sectors,
 			   UINT_MAX >> SECTOR_SHIFT);
 
-	if (unlikely(op == REQ_OP_WRITE_SAME))
-		return q->limits.max_write_same_sectors;
-
 	if (unlikely(op == REQ_OP_WRITE_ZEROES))
 		return q->limits.max_write_zeroes_sectors;
 
@@ -958,8 +954,6 @@ extern void blk_queue_max_discard_segments(struct request_queue *,
 extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
 extern void blk_queue_max_discard_sectors(struct request_queue *q,
 		unsigned int max_discard_sectors);
-extern void blk_queue_max_write_same_sectors(struct request_queue *q,
-		unsigned int max_write_same_sectors);
 extern void blk_queue_max_write_zeroes_sectors(struct request_queue *q,
 		unsigned int max_write_same_sectors);
 extern void blk_queue_logical_block_size(struct request_queue *, unsigned int);
@@ -1096,9 +1090,6 @@ static inline long nr_blockdev_pages(void)
 
 extern void blk_io_schedule(void);
 
-extern int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-		sector_t nr_sects, gfp_t gfp_mask, struct page *page);
-
 #define BLKDEV_DISCARD_SECURE	(1 << 0)	/* issue a secure erase */
 
 extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
@@ -1325,16 +1316,6 @@ static inline int bdev_discard_alignment(struct block_device *bdev)
 	return q->limits.discard_alignment;
 }
 
-static inline unsigned int bdev_write_same(struct block_device *bdev)
-{
-	struct request_queue *q = bdev_get_queue(bdev);
-
-	if (q)
-		return q->limits.max_write_same_sectors;
-
-	return 0;
-}
-
 static inline unsigned int bdev_write_zeroes_sectors(struct block_device *bdev)
 {
 	struct request_queue *q = bdev_get_queue(bdev);
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index af68a67179b48..19514edc44f71 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1892,7 +1892,6 @@ void blk_fill_rwbs(char *rwbs, unsigned int op)
 
 	switch (op & REQ_OP_MASK) {
 	case REQ_OP_WRITE:
-	case REQ_OP_WRITE_SAME:
 		rwbs[i++] = 'W';
 		break;
 	case REQ_OP_DISCARD:
-- 
2.30.2

[PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Christoph Hellwig]

No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
so remove the infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-core.c          | 13 +-----
 block/blk-lib.c           | 91 ---------------------------------------
 block/blk-merge.c         | 40 -----------------
 block/blk-settings.c      | 16 -------
 block/blk-sysfs.c         |  8 ----
 block/blk-zoned.c         |  1 -
 block/blk.h               |  1 -
 block/bounce.c            |  3 --
 include/linux/bio.h       |  3 --
 include/linux/blk_types.h |  2 -
 include/linux/blkdev.h    | 19 --------
 kernel/trace/blktrace.c   |  1 -
 12 files changed, 1 insertion(+), 197 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index be8812f5489d4..dabc771538db8 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -122,7 +122,6 @@ static const char *const blk_op_name[] = {
 	REQ_OP_NAME(ZONE_CLOSE),
 	REQ_OP_NAME(ZONE_FINISH),
 	REQ_OP_NAME(ZONE_APPEND),
-	REQ_OP_NAME(WRITE_SAME),
 	REQ_OP_NAME(WRITE_ZEROES),
 	REQ_OP_NAME(DRV_IN),
 	REQ_OP_NAME(DRV_OUT),
@@ -735,10 +734,6 @@ noinline_for_stack bool submit_bio_checks(struct bio *bio)
 		if (!blk_queue_secure_erase(q))
 			goto not_supported;
 		break;
-	case REQ_OP_WRITE_SAME:
-		if (!q->limits.max_write_same_sectors)
-			goto not_supported;
-		break;
 	case REQ_OP_ZONE_APPEND:
 		status = blk_check_zone_append(q, bio);
 		if (status != BLK_STS_OK)
@@ -934,13 +929,7 @@ void submit_bio(struct bio *bio)
 	 * go through the normal accounting stuff before submission.
 	 */
 	if (bio_has_data(bio)) {
-		unsigned int count;
-
-		if (unlikely(bio_op(bio) == REQ_OP_WRITE_SAME))
-			count = queue_logical_block_size(
-					bdev_get_queue(bio->bi_bdev)) >> 9;
-		else
-			count = bio_sectors(bio);
+		unsigned int count = bio_sectors(bio);
 
 		if (op_is_write(bio_op(bio))) {
 			count_vm_events(PGPGOUT, count);
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 1b8ced45e4e55..05d3dbfe24eaa 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -135,97 +135,6 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 }
 EXPORT_SYMBOL(blkdev_issue_discard);
 
-/**
- * __blkdev_issue_write_same - generate number of bios with same page
- * @bdev:	target blockdev
- * @sector:	start sector
- * @nr_sects:	number of sectors to write
- * @gfp_mask:	memory allocation flags (for bio_alloc)
- * @page:	page containing data to write
- * @biop:	pointer to anchor bio
- *
- * Description:
- *  Generate and issue number of bios(REQ_OP_WRITE_SAME) with same page.
- */
-static int __blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-		sector_t nr_sects, gfp_t gfp_mask, struct page *page,
-		struct bio **biop)
-{
-	struct request_queue *q = bdev_get_queue(bdev);
-	unsigned int max_write_same_sectors;
-	struct bio *bio = *biop;
-	sector_t bs_mask;
-
-	if (!q)
-		return -ENXIO;
-
-	if (bdev_read_only(bdev))
-		return -EPERM;
-
-	bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
-	if ((sector | nr_sects) & bs_mask)
-		return -EINVAL;
-
-	if (!bdev_write_same(bdev))
-		return -EOPNOTSUPP;
-
-	/* Ensure that max_write_same_sectors doesn't overflow bi_size */
-	max_write_same_sectors = bio_allowed_max_sectors(q);
-
-	while (nr_sects) {
-		bio = blk_next_bio(bio, bdev, 1, REQ_OP_WRITE_SAME, gfp_mask);
-		bio->bi_iter.bi_sector = sector;
-		bio->bi_vcnt = 1;
-		bio->bi_io_vec->bv_page = page;
-		bio->bi_io_vec->bv_offset = 0;
-		bio->bi_io_vec->bv_len = bdev_logical_block_size(bdev);
-
-		if (nr_sects > max_write_same_sectors) {
-			bio->bi_iter.bi_size = max_write_same_sectors << 9;
-			nr_sects -= max_write_same_sectors;
-			sector += max_write_same_sectors;
-		} else {
-			bio->bi_iter.bi_size = nr_sects << 9;
-			nr_sects = 0;
-		}
-		cond_resched();
-	}
-
-	*biop = bio;
-	return 0;
-}
-
-/**
- * blkdev_issue_write_same - queue a write same operation
- * @bdev:	target blockdev
- * @sector:	start sector
- * @nr_sects:	number of sectors to write
- * @gfp_mask:	memory allocation flags (for bio_alloc)
- * @page:	page containing data
- *
- * Description:
- *    Issue a write same request for the sectors in question.
- */
-int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-				sector_t nr_sects, gfp_t gfp_mask,
-				struct page *page)
-{
-	struct bio *bio = NULL;
-	struct blk_plug plug;
-	int ret;
-
-	blk_start_plug(&plug);
-	ret = __blkdev_issue_write_same(bdev, sector, nr_sects, gfp_mask, page,
-			&bio);
-	if (ret == 0 && bio) {
-		ret = submit_bio_wait(bio);
-		bio_put(bio);
-	}
-	blk_finish_plug(&plug);
-	return ret;
-}
-EXPORT_SYMBOL(blkdev_issue_write_same);
-
 static int __blkdev_issue_write_zeroes(struct block_device *bdev,
 		sector_t sector, sector_t nr_sects, gfp_t gfp_mask,
 		struct bio **biop, unsigned flags)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 4de34a332c9fd..87cee7e82ae15 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -152,22 +152,6 @@ static struct bio *blk_bio_write_zeroes_split(struct request_queue *q,
 	return bio_split(bio, q->limits.max_write_zeroes_sectors, GFP_NOIO, bs);
 }
 
-static struct bio *blk_bio_write_same_split(struct request_queue *q,
-					    struct bio *bio,
-					    struct bio_set *bs,
-					    unsigned *nsegs)
-{
-	*nsegs = 1;
-
-	if (!q->limits.max_write_same_sectors)
-		return NULL;
-
-	if (bio_sectors(bio) <= q->limits.max_write_same_sectors)
-		return NULL;
-
-	return bio_split(bio, q->limits.max_write_same_sectors, GFP_NOIO, bs);
-}
-
 /*
  * Return the maximum number of sectors from the start of a bio that may be
  * submitted as a single request to a block device. If enough sectors remain,
@@ -351,10 +335,6 @@ void __blk_queue_split(struct request_queue *q, struct bio **bio,
 		split = blk_bio_write_zeroes_split(q, *bio, &q->bio_split,
 				nr_segs);
 		break;
-	case REQ_OP_WRITE_SAME:
-		split = blk_bio_write_same_split(q, *bio, &q->bio_split,
-				nr_segs);
-		break;
 	default:
 		split = blk_bio_segment_split(q, *bio, &q->bio_split, nr_segs);
 		break;
@@ -416,8 +396,6 @@ unsigned int blk_recalc_rq_segments(struct request *rq)
 		return 1;
 	case REQ_OP_WRITE_ZEROES:
 		return 0;
-	case REQ_OP_WRITE_SAME:
-		return 1;
 	}
 
 	rq_for_each_bvec(bv, rq, iter)
@@ -555,8 +533,6 @@ int __blk_rq_map_sg(struct request_queue *q, struct request *rq,
 
 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
 		nsegs = __blk_bvec_map_sg(rq->special_vec, sglist, last_sg);
-	else if (rq->bio && bio_op(rq->bio) == REQ_OP_WRITE_SAME)
-		nsegs = __blk_bvec_map_sg(bio_iovec(rq->bio), sglist, last_sg);
 	else if (rq->bio)
 		nsegs = __blk_bios_map_sg(q, rq->bio, sglist, last_sg);
 
@@ -757,13 +733,6 @@ static enum elv_merge blk_try_req_merge(struct request *req,
 	return ELEVATOR_NO_MERGE;
 }
 
-static inline bool blk_write_same_mergeable(struct bio *a, struct bio *b)
-{
-	if (bio_page(a) == bio_page(b) && bio_offset(a) == bio_offset(b))
-		return true;
-	return false;
-}
-
 /*
  * For non-mq, this has to be called with the request spinlock acquired.
  * For mq with scheduling, the appropriate queue wide lock should be held.
@@ -780,10 +749,6 @@ static struct request *attempt_merge(struct request_queue *q,
 	if (rq_data_dir(req) != rq_data_dir(next))
 		return NULL;
 
-	if (req_op(req) == REQ_OP_WRITE_SAME &&
-	    !blk_write_same_mergeable(req->bio, next->bio))
-		return NULL;
-
 	/*
 	 * Don't allow merge of different write hints, or for a hint with
 	 * non-hint IO.
@@ -912,11 +877,6 @@ bool blk_rq_merge_ok(struct request *rq, struct bio *bio)
 	if (!bio_crypt_rq_ctx_compatible(rq, bio))
 		return false;
 
-	/* must be using the same buffer */
-	if (req_op(rq) == REQ_OP_WRITE_SAME &&
-	    !blk_write_same_mergeable(rq->bio, bio))
-		return false;
-
 	/*
 	 * Don't allow merge of different write hints, or for a hint with
 	 * non-hint IO.
diff --git a/block/blk-settings.c b/block/blk-settings.c
index b880c70e22e4e..b83df3d2eebca 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -42,7 +42,6 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->max_sectors = lim->max_hw_sectors = BLK_SAFE_MAX_SECTORS;
 	lim->max_dev_sectors = 0;
 	lim->chunk_sectors = 0;
-	lim->max_write_same_sectors = 0;
 	lim->max_write_zeroes_sectors = 0;
 	lim->max_zone_append_sectors = 0;
 	lim->max_discard_sectors = 0;
@@ -79,7 +78,6 @@ void blk_set_stacking_limits(struct queue_limits *lim)
 	lim->max_segment_size = UINT_MAX;
 	lim->max_sectors = UINT_MAX;
 	lim->max_dev_sectors = UINT_MAX;
-	lim->max_write_same_sectors = UINT_MAX;
 	lim->max_write_zeroes_sectors = UINT_MAX;
 	lim->max_zone_append_sectors = UINT_MAX;
 }
@@ -178,18 +176,6 @@ void blk_queue_max_discard_sectors(struct request_queue *q,
 }
 EXPORT_SYMBOL(blk_queue_max_discard_sectors);
 
-/**
- * blk_queue_max_write_same_sectors - set max sectors for a single write same
- * @q:  the request queue for the device
- * @max_write_same_sectors: maximum number of sectors to write per command
- **/
-void blk_queue_max_write_same_sectors(struct request_queue *q,
-				      unsigned int max_write_same_sectors)
-{
-	q->limits.max_write_same_sectors = max_write_same_sectors;
-}
-EXPORT_SYMBOL(blk_queue_max_write_same_sectors);
-
 /**
  * blk_queue_max_write_zeroes_sectors - set max sectors for a single
  *                                      write zeroes
@@ -519,8 +505,6 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
 	t->max_dev_sectors = min_not_zero(t->max_dev_sectors, b->max_dev_sectors);
-	t->max_write_same_sectors = min(t->max_write_same_sectors,
-					b->max_write_same_sectors);
 	t->max_write_zeroes_sectors = min(t->max_write_zeroes_sectors,
 					b->max_write_zeroes_sectors);
 	t->max_zone_append_sectors = min(t->max_zone_append_sectors,
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 9f32882ceb2f6..4a5bb47bee3ce 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -212,12 +212,6 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
 	return queue_var_show(0, page);
 }
 
-static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
-{
-	return sprintf(page, "%llu\n",
-		(unsigned long long)q->limits.max_write_same_sectors << 9);
-}
-
 static ssize_t queue_write_zeroes_max_show(struct request_queue *q, char *page)
 {
 	return sprintf(page, "%llu\n",
@@ -587,7 +581,6 @@ QUEUE_RO_ENTRY(queue_discard_max_hw, "discard_max_hw_bytes");
 QUEUE_RW_ENTRY(queue_discard_max, "discard_max_bytes");
 QUEUE_RO_ENTRY(queue_discard_zeroes_data, "discard_zeroes_data");
 
-QUEUE_RO_ENTRY(queue_write_same_max, "write_same_max_bytes");
 QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_write_granularity, "zone_write_granularity");
@@ -643,7 +636,6 @@ static struct attribute *queue_attrs[] = {
 	&queue_discard_max_entry.attr,
 	&queue_discard_max_hw_entry.attr,
 	&queue_discard_zeroes_data_entry.attr,
-	&queue_write_same_max_entry.attr,
 	&queue_write_zeroes_max_entry.attr,
 	&queue_zone_append_max_entry.attr,
 	&queue_zone_write_granularity_entry.attr,
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index 602bef54c8134..38cd840d88387 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -65,7 +65,6 @@ bool blk_req_needs_zone_write_lock(struct request *rq)
 
 	switch (req_op(rq)) {
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 	case REQ_OP_WRITE:
 		return blk_rq_zone_is_seq(rq);
 	default:
diff --git a/block/blk.h b/block/blk.h
index abb663a2a147b..2fe483bcc6d38 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -286,7 +286,6 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
 	case REQ_OP_DISCARD:
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
-	case REQ_OP_WRITE_SAME:
 		return true; /* non-trivial splitting decisions */
 	default:
 		break;
diff --git a/block/bounce.c b/block/bounce.c
index 3fd3bc6fd5dbb..d9df1788c440c 100644
--- a/block/bounce.c
+++ b/block/bounce.c
@@ -178,9 +178,6 @@ static struct bio *bounce_clone_bio(struct bio *bio_src)
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
 		break;
-	case REQ_OP_WRITE_SAME:
-		bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
-		break;
 	default:
 		bio_for_each_segment(bv, bio_src, iter)
 			bio->bi_io_vec[bio->bi_vcnt++] = bv;
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 7523aba4ddf7c..74bf16558ef4b 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -65,7 +65,6 @@ static inline bool bio_no_advance_iter(const struct bio *bio)
 {
 	return bio_op(bio) == REQ_OP_DISCARD ||
 	       bio_op(bio) == REQ_OP_SECURE_ERASE ||
-	       bio_op(bio) == REQ_OP_WRITE_SAME ||
 	       bio_op(bio) == REQ_OP_WRITE_ZEROES;
 }
 
@@ -186,8 +185,6 @@ static inline unsigned bio_segments(struct bio *bio)
 	case REQ_OP_SECURE_ERASE:
 	case REQ_OP_WRITE_ZEROES:
 		return 0;
-	case REQ_OP_WRITE_SAME:
-		return 1;
 	default:
 		break;
 	}
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 5561e58d158ac..e72cb45593fbe 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -361,8 +361,6 @@ enum req_opf {
 	REQ_OP_DISCARD		= 3,
 	/* securely erase sectors */
 	REQ_OP_SECURE_ERASE	= 5,
-	/* write the same sector many times */
-	REQ_OP_WRITE_SAME	= 7,
 	/* write the zero filled sector many times */
 	REQ_OP_WRITE_ZEROES	= 9,
 	/* Open a zone */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3bfc75a2a4509..b92345c044991 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -247,7 +247,6 @@ struct queue_limits {
 	unsigned int		io_opt;
 	unsigned int		max_discard_sectors;
 	unsigned int		max_hw_discard_sectors;
-	unsigned int		max_write_same_sectors;
 	unsigned int		max_write_zeroes_sectors;
 	unsigned int		max_zone_append_sectors;
 	unsigned int		discard_granularity;
@@ -913,9 +912,6 @@ static inline unsigned int blk_queue_get_max_sectors(struct request_queue *q,
 		return min(q->limits.max_discard_sectors,
 			   UINT_MAX >> SECTOR_SHIFT);
 
-	if (unlikely(op == REQ_OP_WRITE_SAME))
-		return q->limits.max_write_same_sectors;
-
 	if (unlikely(op == REQ_OP_WRITE_ZEROES))
 		return q->limits.max_write_zeroes_sectors;
 
@@ -958,8 +954,6 @@ extern void blk_queue_max_discard_segments(struct request_queue *,
 extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
 extern void blk_queue_max_discard_sectors(struct request_queue *q,
 		unsigned int max_discard_sectors);
-extern void blk_queue_max_write_same_sectors(struct request_queue *q,
-		unsigned int max_write_same_sectors);
 extern void blk_queue_max_write_zeroes_sectors(struct request_queue *q,
 		unsigned int max_write_same_sectors);
 extern void blk_queue_logical_block_size(struct request_queue *, unsigned int);
@@ -1096,9 +1090,6 @@ static inline long nr_blockdev_pages(void)
 
 extern void blk_io_schedule(void);
 
-extern int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
-		sector_t nr_sects, gfp_t gfp_mask, struct page *page);
-
 #define BLKDEV_DISCARD_SECURE	(1 << 0)	/* issue a secure erase */
 
 extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
@@ -1325,16 +1316,6 @@ static inline int bdev_discard_alignment(struct block_device *bdev)
 	return q->limits.discard_alignment;
 }
 
-static inline unsigned int bdev_write_same(struct block_device *bdev)
-{
-	struct request_queue *q = bdev_get_queue(bdev);
-
-	if (q)
-		return q->limits.max_write_same_sectors;
-
-	return 0;
-}
-
 static inline unsigned int bdev_write_zeroes_sectors(struct block_device *bdev)
 {
 	struct request_queue *q = bdev_get_queue(bdev);
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index af68a67179b48..19514edc44f71 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1892,7 +1892,6 @@ void blk_fill_rwbs(char *rwbs, unsigned int op)
 
 	switch (op & REQ_OP_MASK) {
 	case REQ_OP_WRITE:
-	case REQ_OP_WRITE_SAME:
 		rwbs[i++] = 'W';
 		break;
 	case REQ_OP_DISCARD:
-- 
2.30.2

Re: [dm-devel] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
> so remove the infrastructure.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>


--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
> so remove the infrastructure.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Re: [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
> so remove the infrastructure.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>

Looks good.

Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

Re: [dm-devel] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Martin K. Petersen]

Christoph,

> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 9f32882ceb2f6..4a5bb47bee3ce 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -212,12 +212,6 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
>  	return queue_var_show(0, page);
>  }
>  
> -static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
> -{
> -	return sprintf(page, "%llu\n",
> -		(unsigned long long)q->limits.max_write_same_sectors << 9);
> -}
> -

This tripped one of my test scripts. We should probably return 0 here
like we did for discard_zeroes_data and leave the sysfs entry in place.

-- 
Martin K. Petersen	Oracle Linux Engineering

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Martin K. Petersen]

Christoph,

> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 9f32882ceb2f6..4a5bb47bee3ce 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -212,12 +212,6 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
>  	return queue_var_show(0, page);
>  }
>  
> -static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
> -{
> -	return sprintf(page, "%llu\n",
> -		(unsigned long long)q->limits.max_write_same_sectors << 9);
> -}
> -

This tripped one of my test scripts. We should probably return 0 here
like we did for discard_zeroes_data and leave the sysfs entry in place.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Martin K. Petersen]

Christoph,

> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 9f32882ceb2f6..4a5bb47bee3ce 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -212,12 +212,6 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
>  	return queue_var_show(0, page);
>  }
>  
> -static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
> -{
> -	return sprintf(page, "%llu\n",
> -		(unsigned long long)q->limits.max_write_same_sectors << 9);
> -}
> -

This tripped one of my test scripts. We should probably return 0 here
like we did for discard_zeroes_data and leave the sysfs entry in place.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [dm-devel] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Christoph Hellwig]

On Sat, Feb 19, 2022 at 08:44:18PM -0500, Martin K. Petersen wrote:
> > -static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
> > -{
> > -	return sprintf(page, "%llu\n",
> > -		(unsigned long long)q->limits.max_write_same_sectors << 9);
> > -}
> > -
> 
> This tripped one of my test scripts. We should probably return 0 here
> like we did for discard_zeroes_data and leave the sysfs entry in place.

The maybe fold this in?

---
>From eae8e9b8cff5ee8522b00430a4aabd01ebc7c55a Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 22 Feb 2022 08:35:59 +0100
Subject: block: restore the write_same_max sysfs attribute

Some userspace breaks if this attribute is gone.  Restore it and always
return 0.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-sysfs.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 4a5bb47bee3ce..431fdd036f65a 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -212,6 +212,11 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
 	return queue_var_show(0, page);
 }
 
+static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
+{
+	return sprintf(page, "%llu\n", 0ULL);
+}
+
 static ssize_t queue_write_zeroes_max_show(struct request_queue *q, char *page)
 {
 	return sprintf(page, "%llu\n",
@@ -581,6 +586,7 @@ QUEUE_RO_ENTRY(queue_discard_max_hw, "discard_max_hw_bytes");
 QUEUE_RW_ENTRY(queue_discard_max, "discard_max_bytes");
 QUEUE_RO_ENTRY(queue_discard_zeroes_data, "discard_zeroes_data");
 
+QUEUE_RO_ENTRY(queue_write_same_max, "write_same_max_bytes");
 QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_write_granularity, "zone_write_granularity");
@@ -636,6 +642,7 @@ static struct attribute *queue_attrs[] = {
 	&queue_discard_max_entry.attr,
 	&queue_discard_max_hw_entry.attr,
 	&queue_discard_zeroes_data_entry.attr,
+	&queue_write_same_max_entry.attr,
 	&queue_write_zeroes_max_entry.attr,
 	&queue_zone_append_max_entry.attr,
 	&queue_zone_write_granularity_entry.attr,
-- 
2.30.2

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Christoph Hellwig]

On Sat, Feb 19, 2022 at 08:44:18PM -0500, Martin K. Petersen wrote:
> > -static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
> > -{
> > -	return sprintf(page, "%llu\n",
> > -		(unsigned long long)q->limits.max_write_same_sectors << 9);
> > -}
> > -
> 
> This tripped one of my test scripts. We should probably return 0 here
> like we did for discard_zeroes_data and leave the sysfs entry in place.

The maybe fold this in?

---
From eae8e9b8cff5ee8522b00430a4aabd01ebc7c55a Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 22 Feb 2022 08:35:59 +0100
Subject: block: restore the write_same_max sysfs attribute

Some userspace breaks if this attribute is gone.  Restore it and always
return 0.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-sysfs.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 4a5bb47bee3ce..431fdd036f65a 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -212,6 +212,11 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
 	return queue_var_show(0, page);
 }
 
+static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
+{
+	return sprintf(page, "%llu\n", 0ULL);
+}
+
 static ssize_t queue_write_zeroes_max_show(struct request_queue *q, char *page)
 {
 	return sprintf(page, "%llu\n",
@@ -581,6 +586,7 @@ QUEUE_RO_ENTRY(queue_discard_max_hw, "discard_max_hw_bytes");
 QUEUE_RW_ENTRY(queue_discard_max, "discard_max_bytes");
 QUEUE_RO_ENTRY(queue_discard_zeroes_data, "discard_zeroes_data");
 
+QUEUE_RO_ENTRY(queue_write_same_max, "write_same_max_bytes");
 QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_write_granularity, "zone_write_granularity");
@@ -636,6 +642,7 @@ static struct attribute *queue_attrs[] = {
 	&queue_discard_max_entry.attr,
 	&queue_discard_max_hw_entry.attr,
 	&queue_discard_zeroes_data_entry.attr,
+	&queue_write_same_max_entry.attr,
 	&queue_write_zeroes_max_entry.attr,
 	&queue_zone_append_max_entry.attr,
 	&queue_zone_write_granularity_entry.attr,
-- 
2.30.2

Re: [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Christoph Hellwig]

On Sat, Feb 19, 2022 at 08:44:18PM -0500, Martin K. Petersen wrote:
> > -static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
> > -{
> > -	return sprintf(page, "%llu\n",
> > -		(unsigned long long)q->limits.max_write_same_sectors << 9);
> > -}
> > -
> 
> This tripped one of my test scripts. We should probably return 0 here
> like we did for discard_zeroes_data and leave the sysfs entry in place.

The maybe fold this in?

---
From eae8e9b8cff5ee8522b00430a4aabd01ebc7c55a Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 22 Feb 2022 08:35:59 +0100
Subject: block: restore the write_same_max sysfs attribute

Some userspace breaks if this attribute is gone.  Restore it and always
return 0.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/blk-sysfs.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 4a5bb47bee3ce..431fdd036f65a 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -212,6 +212,11 @@ static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *pag
 	return queue_var_show(0, page);
 }
 
+static ssize_t queue_write_same_max_show(struct request_queue *q, char *page)
+{
+	return sprintf(page, "%llu\n", 0ULL);
+}
+
 static ssize_t queue_write_zeroes_max_show(struct request_queue *q, char *page)
 {
 	return sprintf(page, "%llu\n",
@@ -581,6 +586,7 @@ QUEUE_RO_ENTRY(queue_discard_max_hw, "discard_max_hw_bytes");
 QUEUE_RW_ENTRY(queue_discard_max, "discard_max_bytes");
 QUEUE_RO_ENTRY(queue_discard_zeroes_data, "discard_zeroes_data");
 
+QUEUE_RO_ENTRY(queue_write_same_max, "write_same_max_bytes");
 QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes");
 QUEUE_RO_ENTRY(queue_zone_write_granularity, "zone_write_granularity");
@@ -636,6 +642,7 @@ static struct attribute *queue_attrs[] = {
 	&queue_discard_max_entry.attr,
 	&queue_discard_max_hw_entry.attr,
 	&queue_discard_zeroes_data_entry.attr,
+	&queue_write_same_max_entry.attr,
 	&queue_write_zeroes_max_entry.attr,
 	&queue_zone_append_max_entry.attr,
 	&queue_zone_write_granularity_entry.attr,
-- 
2.30.2

Re: [dm-devel] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Martin K. Petersen]

Christoph,

> The maybe fold this in?

Done, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Martin K. Petersen]

Christoph,

> The maybe fold this in?

Done, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [PATCH 7/7] block: remove REQ_OP_WRITE_SAME support

[Martin K. Petersen]

Christoph,

> The maybe fold this in?

Done, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [dm-devel] remove REQ_OP_WRITE_SAME v2

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.
> 
> For the target code the only real use case was zeroing offload, which
> is kept with this series, and for DRBD I suspect the same based on the
> usage.
> 
>      git://git.infradead.org/users/hch/block.git delete-write-same
> 
> Gitweb:
> 
>      http://git.infradead.org/users/hch/block.git/shortlog/refs/heads/delete-write-same
> 
> Changes since v2:
>   - split up
>   - rebased ontop of five years of kernel change, including the totally
>     pointless addition of REQ_OP_WRITE_SAME in rnbd
> 

Thanks a lot for doing this, much less code to test and review in
blk-lib.c now ...

-ck



--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.
> 
> For the target code the only real use case was zeroing offload, which
> is kept with this series, and for DRBD I suspect the same based on the
> usage.
> 
>      git://git.infradead.org/users/hch/block.git delete-write-same
> 
> Gitweb:
> 
>      http://git.infradead.org/users/hch/block.git/shortlog/refs/heads/delete-write-same
> 
> Changes since v2:
>   - split up
>   - rebased ontop of five years of kernel change, including the totally
>     pointless addition of REQ_OP_WRITE_SAME in rnbd
> 

Thanks a lot for doing this, much less code to test and review in
blk-lib.c now ...

-ck

Re: remove REQ_OP_WRITE_SAME v2

[Chaitanya Kulkarni]

On 2/9/22 12:28 AM, Christoph Hellwig wrote:
> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.
> 
> For the target code the only real use case was zeroing offload, which
> is kept with this series, and for DRBD I suspect the same based on the
> usage.
> 
>      git://git.infradead.org/users/hch/block.git delete-write-same
> 
> Gitweb:
> 
>      http://git.infradead.org/users/hch/block.git/shortlog/refs/heads/delete-write-same
> 
> Changes since v2:
>   - split up
>   - rebased ontop of five years of kernel change, including the totally
>     pointless addition of REQ_OP_WRITE_SAME in rnbd
> 

Thanks a lot for doing this, much less code to test and review in
blk-lib.c now ...

-ck

Re: [dm-devel] remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.

No particular objections from me. I had a half-baked series to do the
same thing.

One thing I would like is to either pull this series through SCSI or do
the block pieces in a post merge branch because I'm about to post my
discard/zeroing rework and that's going to clash with your changes.

-- 
Martin K. Petersen	Oracle Linux Engineering

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.

No particular objections from me. I had a half-baked series to do the
same thing.

One thing I would like is to either pull this series through SCSI or do
the block pieces in a post merge branch because I'm about to post my
discard/zeroing rework and that's going to clash with your changes.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.

No particular objections from me. I had a half-baked series to do the
same thing.

One thing I would like is to either pull this series through SCSI or do
the block pieces in a post merge branch because I'm about to post my
discard/zeroing rework and that's going to clash with your changes.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [dm-devel] remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

On Wed, Feb 09, 2022 at 01:00:26PM -0500, Martin K. Petersen wrote:
> 
> Christoph,
> 
> > Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> > kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> > have two callers left, and both just export optional protocol features
> > to remote systems: DRBD and the target code.
> 
> No particular objections from me. I had a half-baked series to do the
> same thing.
> 
> One thing I would like is to either pull this series through SCSI or do
> the block pieces in a post merge branch because I'm about to post my
> discard/zeroing rework and that's going to clash with your changes.

I'd be fine with taking this through the SCSI tree.  Or we can wait
another merge window to make your life easier.

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

On Wed, Feb 09, 2022 at 01:00:26PM -0500, Martin K. Petersen wrote:
> 
> Christoph,
> 
> > Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> > kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> > have two callers left, and both just export optional protocol features
> > to remote systems: DRBD and the target code.
> 
> No particular objections from me. I had a half-baked series to do the
> same thing.
> 
> One thing I would like is to either pull this series through SCSI or do
> the block pieces in a post merge branch because I'm about to post my
> discard/zeroing rework and that's going to clash with your changes.

I'd be fine with taking this through the SCSI tree.  Or we can wait
another merge window to make your life easier.

Re: remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

On Wed, Feb 09, 2022 at 01:00:26PM -0500, Martin K. Petersen wrote:
> 
> Christoph,
> 
> > Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> > kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> > have two callers left, and both just export optional protocol features
> > to remote systems: DRBD and the target code.
> 
> No particular objections from me. I had a half-baked series to do the
> same thing.
> 
> One thing I would like is to either pull this series through SCSI or do
> the block pieces in a post merge branch because I'm about to post my
> discard/zeroing rework and that's going to clash with your changes.

I'd be fine with taking this through the SCSI tree.  Or we can wait
another merge window to make your life easier.

Re: [dm-devel] remove REQ_OP_WRITE_SAME v2

[Jens Axboe]

On 2/9/22 10:51 PM, Christoph Hellwig wrote:
> On Wed, Feb 09, 2022 at 01:00:26PM -0500, Martin K. Petersen wrote:
>>
>> Christoph,
>>
>>> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
>>> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
>>> have two callers left, and both just export optional protocol features
>>> to remote systems: DRBD and the target code.
>>
>> No particular objections from me. I had a half-baked series to do the
>> same thing.
>>
>> One thing I would like is to either pull this series through SCSI or do
>> the block pieces in a post merge branch because I'm about to post my
>> discard/zeroing rework and that's going to clash with your changes.
> 
> I'd be fine with taking this through the SCSI tree.  Or we can wait
> another merge window to make your life easier.

Let's just use the SCSI tree - I didn't check if it throws any conflicts
right now, so probably something to check upfront...

If things pan out, you can add my Acked-by to the series.

-- 
Jens Axboe

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Jens Axboe]

On 2/9/22 10:51 PM, Christoph Hellwig wrote:
> On Wed, Feb 09, 2022 at 01:00:26PM -0500, Martin K. Petersen wrote:
>>
>> Christoph,
>>
>>> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
>>> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
>>> have two callers left, and both just export optional protocol features
>>> to remote systems: DRBD and the target code.
>>
>> No particular objections from me. I had a half-baked series to do the
>> same thing.
>>
>> One thing I would like is to either pull this series through SCSI or do
>> the block pieces in a post merge branch because I'm about to post my
>> discard/zeroing rework and that's going to clash with your changes.
> 
> I'd be fine with taking this through the SCSI tree.  Or we can wait
> another merge window to make your life easier.

Let's just use the SCSI tree - I didn't check if it throws any conflicts
right now, so probably something to check upfront...

If things pan out, you can add my Acked-by to the series.

-- 
Jens Axboe

Re: remove REQ_OP_WRITE_SAME v2

[Jens Axboe]

On 2/9/22 10:51 PM, Christoph Hellwig wrote:
> On Wed, Feb 09, 2022 at 01:00:26PM -0500, Martin K. Petersen wrote:
>>
>> Christoph,
>>
>>> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
>>> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
>>> have two callers left, and both just export optional protocol features
>>> to remote systems: DRBD and the target code.
>>
>> No particular objections from me. I had a half-baked series to do the
>> same thing.
>>
>> One thing I would like is to either pull this series through SCSI or do
>> the block pieces in a post merge branch because I'm about to post my
>> discard/zeroing rework and that's going to clash with your changes.
> 
> I'd be fine with taking this through the SCSI tree.  Or we can wait
> another merge window to make your life easier.

Let's just use the SCSI tree - I didn't check if it throws any conflicts
right now, so probably something to check upfront...

If things pan out, you can add my Acked-by to the series.

-- 
Jens Axboe

Re: [dm-devel] remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

On Wed, Feb 16, 2022 at 08:07:56PM -0700, Jens Axboe wrote:
> Let's just use the SCSI tree - I didn't check if it throws any conflicts
> right now, so probably something to check upfront...

There is a minor conflict because the __blkdev_issue_write_same
function removed by this series is affected by the blk_next_bio calling
convention change in the block tree, but the fixup is trivial.

Martin: do you want to fix that up when applying, or do you want me
to resend?  If you have your discard rework ready you can also send
that now and I'll rebase on top of that.

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

On Wed, Feb 16, 2022 at 08:07:56PM -0700, Jens Axboe wrote:
> Let's just use the SCSI tree - I didn't check if it throws any conflicts
> right now, so probably something to check upfront...

There is a minor conflict because the __blkdev_issue_write_same
function removed by this series is affected by the blk_next_bio calling
convention change in the block tree, but the fixup is trivial.

Martin: do you want to fix that up when applying, or do you want me
to resend?  If you have your discard rework ready you can also send
that now and I'll rebase on top of that.

Re: remove REQ_OP_WRITE_SAME v2

[Christoph Hellwig]

On Wed, Feb 16, 2022 at 08:07:56PM -0700, Jens Axboe wrote:
> Let's just use the SCSI tree - I didn't check if it throws any conflicts
> right now, so probably something to check upfront...

There is a minor conflict because the __blkdev_issue_write_same
function removed by this series is affected by the blk_next_bio calling
convention change in the block tree, but the fixup is trivial.

Martin: do you want to fix that up when applying, or do you want me
to resend?  If you have your discard rework ready you can also send
that now and I'll rebase on top of that.

Re: [dm-devel] remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> There is a minor conflict because the __blkdev_issue_write_same
> function removed by this series is affected by the blk_next_bio calling
> convention change in the block tree, but the fixup is trivial.
>
> Martin: do you want to fix that up when applying, or do you want me
> to resend?  If you have your discard rework ready you can also send
> that now and I'll rebase on top of that.

I'll fix it up when applying. Will get this queued up tomorrow.

-- 
Martin K. Petersen	Oracle Linux Engineering

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> There is a minor conflict because the __blkdev_issue_write_same
> function removed by this series is affected by the blk_next_bio calling
> convention change in the block tree, but the fixup is trivial.
>
> Martin: do you want to fix that up when applying, or do you want me
> to resend?  If you have your discard rework ready you can also send
> that now and I'll rebase on top of that.

I'll fix it up when applying. Will get this queued up tomorrow.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> There is a minor conflict because the __blkdev_issue_write_same
> function removed by this series is affected by the blk_next_bio calling
> convention change in the block tree, but the fixup is trivial.
>
> Martin: do you want to fix that up when applying, or do you want me
> to resend?  If you have your discard rework ready you can also send
> that now and I'll rebase on top of that.

I'll fix it up when applying. Will get this queued up tomorrow.

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [dm-devel] remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.

Applied to 5.18/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.

Applied to 5.18/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

Christoph,

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.

Applied to 5.18/scsi-staging, thanks!

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: [dm-devel] remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

On Wed, 9 Feb 2022 09:28:21 +0100, Christoph Hellwig wrote:

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.
> 
> For the target code the only real use case was zeroing offload, which
> is kept with this series, and for DRBD I suspect the same based on the
> usage.
> 
> [...]

Applied to 5.18/scsi-queue, thanks!

[1/7] cxlflash: query write_zeroes limit for zeroing
      https://git.kernel.org/mkp/scsi/c/898cd34607eb
[2/7] drbd: drop REQ_OP_WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/a34592ff6b78
[3/7] rnbd: drop WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/ebd04737637b
[4/7] sd: remove write same support
      https://git.kernel.org/mkp/scsi/c/e383e16e84e9
[5/7] md: drop WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/10fa225c33a9
[6/7] dm: remove write same support
      https://git.kernel.org/mkp/scsi/c/a773187e37fa
[7/7] block: remove REQ_OP_WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/73bd66d9c834

-- 
Martin K. Petersen	Oracle Linux Engineering

--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel

Re: [Drbd-dev] remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

On Wed, 9 Feb 2022 09:28:21 +0100, Christoph Hellwig wrote:

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.
> 
> For the target code the only real use case was zeroing offload, which
> is kept with this series, and for DRBD I suspect the same based on the
> usage.
> 
> [...]

Applied to 5.18/scsi-queue, thanks!

[1/7] cxlflash: query write_zeroes limit for zeroing
      https://git.kernel.org/mkp/scsi/c/898cd34607eb
[2/7] drbd: drop REQ_OP_WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/a34592ff6b78
[3/7] rnbd: drop WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/ebd04737637b
[4/7] sd: remove write same support
      https://git.kernel.org/mkp/scsi/c/e383e16e84e9
[5/7] md: drop WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/10fa225c33a9
[6/7] dm: remove write same support
      https://git.kernel.org/mkp/scsi/c/a773187e37fa
[7/7] block: remove REQ_OP_WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/73bd66d9c834

-- 
Martin K. Petersen	Oracle Linux Engineering

Re: remove REQ_OP_WRITE_SAME v2

[Martin K. Petersen]

On Wed, 9 Feb 2022 09:28:21 +0100, Christoph Hellwig wrote:

> Now that we are using REQ_OP_WRITE_ZEROES for all zeroing needs in the
> kernel there is very little use left for REQ_OP_WRITE_SAME.  We only
> have two callers left, and both just export optional protocol features
> to remote systems: DRBD and the target code.
> 
> For the target code the only real use case was zeroing offload, which
> is kept with this series, and for DRBD I suspect the same based on the
> usage.
> 
> [...]

Applied to 5.18/scsi-queue, thanks!

[1/7] cxlflash: query write_zeroes limit for zeroing
      https://git.kernel.org/mkp/scsi/c/898cd34607eb
[2/7] drbd: drop REQ_OP_WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/a34592ff6b78
[3/7] rnbd: drop WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/ebd04737637b
[4/7] sd: remove write same support
      https://git.kernel.org/mkp/scsi/c/e383e16e84e9
[5/7] md: drop WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/10fa225c33a9
[6/7] dm: remove write same support
      https://git.kernel.org/mkp/scsi/c/a773187e37fa
[7/7] block: remove REQ_OP_WRITE_SAME support
      https://git.kernel.org/mkp/scsi/c/73bd66d9c834

-- 
Martin K. Petersen	Oracle Linux Engineering