* [Buildroot] [PATCH 00/21] First batch of defconfig removals
@ 2022-11-01 22:03 Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 01/21] configs/amarula_a64_relic: remove defconfig Thomas Petazzoni via buildroot
` (21 more replies)
0 siblings, 22 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Thomas Petazzoni
Hello,
This patch series proposes to remove 21 defconfigs which have been
failing to build for month. All of these defconfigs have already been
listed in an e-mail sent on August 6, 2022 [0] to the relevant
defconfig maintainers, and they still haven't been fixed. Close to 3
months later, it's time to remove them, with the goal of having all
defconfigs building for the upcoming 2022.11 release.
I'm proposing to give one extra week (until November 7) before
applying these patches, to see if some of the defconfig maintainers
send patches to fix the defconfigs they are in charge of, or if
anybody else steps up.
[0] https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
Thanks,
Thomas Petazzoni
Thomas Petazzoni (21):
configs/amarula_a64_relic: remove defconfig
configs/arm_juno: remove defconfig
configs/bananapi_m1: remove defconfig
configs/bananapi_m1_plus: remove defconfig
configs/bananapi_m2_plus: remove defconfig
configs/bananapi_m64: remove defconfig
configs/friendlyarm_nanopc_t4: remove defconfig
configs/friendlyarm_nanopi_a64: remove defconfig
configs/friendlyarm_nanopi_m1: remove defconfig
configs/friendlyarm_nanopi_m1: remove defconfig
configs/friendlyarm_nanopi_m4: remove defconfig
configs/friendlyarm_nanopi_neo2: remove defconfig
configs/friendlyarm_nanopi_neo4: remove defconfig
configs/friendlyarm_nanopi_neo_plus2: remove defconfig
configs/friendlyarm_nanopi_r1: remove defconfig
configs/orangepi_pc2: remove defconfig
configs/orangepi_plus: remove defconfig
configs/orangepi_prime: remove defconfig
configs/orangepi_rk3399: remove defconfig
configs/orangepi_win: remove defconfig
configs/pine64: remove defconfig
DEVELOPERS | 38 ----
board/amarula/a64-relic/extlinux.conf | 4 -
board/amarula/a64-relic/genimage.cfg | 11 --
board/amarula/a64-relic/post-build.sh | 4 -
board/amarula/a64-relic/readme.txt | 90 ----------
.../lib/firmware/brcm/brcmfmac4330-sdio.txt | 83 ---------
board/arm/juno/linux-juno-defconfig | 169 -----------------
board/arm/juno/readme.txt | 134 --------------
board/bananapi/bananapi-m1/boot.cmd | 7 -
board/bananapi/bananapi-m1/genimage.cfg | 34 ----
board/bananapi/bananapi-m1/readme.txt | 37 ----
board/bananapi/bananapi-m64/boot.cmd | 6 -
board/bananapi/bananapi-m64/genimage.cfg | 40 -----
board/bananapi/bananapi-m64/readme.txt | 37 ----
board/friendlyarm/nanopc-t4/extlinux.conf | 4 -
board/friendlyarm/nanopc-t4/genimage.cfg | 39 ----
board/friendlyarm/nanopc-t4/post-build.sh | 5 -
board/friendlyarm/nanopc-t4/readme.txt | 45 -----
board/friendlyarm/nanopi-a64/boot.cmd | 6 -
board/friendlyarm/nanopi-a64/genimage.cfg | 40 -----
board/friendlyarm/nanopi-a64/readme.txt | 37 ----
board/friendlyarm/nanopi-m1-plus/boot.cmd | 8 -
board/friendlyarm/nanopi-m1-plus/genimage.cfg | 36 ----
board/friendlyarm/nanopi-m1-plus/readme.txt | 29 ---
board/friendlyarm/nanopi-m1/boot.cmd | 8 -
board/friendlyarm/nanopi-m1/genimage.cfg | 37 ----
board/friendlyarm/nanopi-m1/readme.txt | 29 ---
board/friendlyarm/nanopi-m4/extlinux.conf | 4 -
board/friendlyarm/nanopi-m4/genimage.cfg | 39 ----
board/friendlyarm/nanopi-m4/post-build.sh | 5 -
board/friendlyarm/nanopi-m4/readme.txt | 45 -----
.../nanopi-neo-plus2/extlinux.conf | 4 -
.../friendlyarm/nanopi-neo-plus2/genimage.cfg | 40 -----
.../nanopi-neo-plus2/linux-extras.config | 10 --
.../nanopi-neo-plus2/post-build.sh | 4 -
board/friendlyarm/nanopi-neo-plus2/readme.txt | 37 ----
...3430-sdio.friendlyarm,nanopi-neo-plus2.txt | 53 ------
board/friendlyarm/nanopi-neo2/boot.cmd | 6 -
board/friendlyarm/nanopi-neo2/genimage.cfg | 40 -----
board/friendlyarm/nanopi-neo2/readme.txt | 37 ----
board/friendlyarm/nanopi-neo4/extlinux.conf | 4 -
board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ---
board/friendlyarm/nanopi-neo4/post-build.sh | 5 -
board/friendlyarm/nanopi-neo4/readme.txt | 53 ------
board/friendlyarm/nanopi-r1/boot.cmd | 8 -
board/friendlyarm/nanopi-r1/genimage.cfg | 37 ----
.../nanopi-r1/kernel/linux-extras.config | 2 -
.../nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts | 170 ------------------
board/friendlyarm/nanopi-r1/readme.txt | 29 ---
.../nanopi-r1/uboot/nanopi_r1_defconfig | 22 ---
.../nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts | 102 -----------
board/orangepi/orangepi-pc2/boot.cmd | 6 -
board/orangepi/orangepi-pc2/genimage.cfg | 40 -----
board/orangepi/orangepi-pc2/readme.txt | 37 ----
board/orangepi/orangepi-plus/boot.cmd | 8 -
board/orangepi/orangepi-plus/genimage.cfg | 36 ----
board/orangepi/orangepi-plus/readme.txt | 29 ---
board/orangepi/orangepi-prime/boot.cmd | 6 -
board/orangepi/orangepi-prime/genimage.cfg | 40 -----
board/orangepi/orangepi-prime/readme.txt | 37 ----
board/orangepi/orangepi-rk3399/extlinux.conf | 4 -
board/orangepi/orangepi-rk3399/genimage.cfg | 38 ----
board/orangepi/orangepi-rk3399/post-build.sh | 5 -
board/orangepi/orangepi-rk3399/readme.txt | 56 ------
board/orangepi/orangepi-win/boot.cmd | 6 -
board/orangepi/orangepi-win/genimage.cfg | 40 -----
board/orangepi/orangepi-win/readme.txt | 37 ----
board/pine64/pine64/boot.cmd | 6 -
board/pine64/pine64/genimage.cfg | 40 -----
board/pine64/pine64/readme.txt | 38 ----
board/sinovoip/m1-plus/boot.cmd | 5 -
board/sinovoip/m1-plus/genimage.cfg | 38 ----
board/sinovoip/m1-plus/linux-wifi.fragment | 10 --
...nanapi-m1-plus-Disable-OOB-IRQ-for-b.patch | 39 ----
board/sinovoip/m1-plus/post-build.sh | 4 -
board/sinovoip/m1-plus/readme.txt | 64 -------
...rcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt | 1 -
.../lib/firmware/brcm/brcmfmac43362-sdio.txt | 56 ------
board/sinovoip/m2-plus/boot.cmd | 7 -
board/sinovoip/m2-plus/genimage.cfg | 34 ----
configs/amarula_a64_relic_defconfig | 63 -------
configs/arm_juno_defconfig | 23 ---
configs/bananapi_m1_defconfig | 29 ---
configs/bananapi_m1_plus_defconfig | 45 -----
configs/bananapi_m2_plus_defconfig | 30 ----
configs/bananapi_m64_defconfig | 50 ------
configs/friendlyarm_nanopc_t4_defconfig | 53 ------
configs/friendlyarm_nanopi_a64_defconfig | 50 ------
configs/friendlyarm_nanopi_m1_defconfig | 45 -----
configs/friendlyarm_nanopi_m1_plus_defconfig | 45 -----
configs/friendlyarm_nanopi_m4_defconfig | 53 ------
configs/friendlyarm_nanopi_neo2_defconfig | 50 ------
configs/friendlyarm_nanopi_neo4_defconfig | 55 ------
.../friendlyarm_nanopi_neo_plus2_defconfig | 62 -------
configs/friendlyarm_nanopi_r1_defconfig | 49 -----
configs/orangepi_pc2_defconfig | 50 ------
configs/orangepi_plus_defconfig | 44 -----
configs/orangepi_prime_defconfig | 50 ------
configs/orangepi_rk3399_defconfig | 53 ------
configs/orangepi_win_defconfig | 48 -----
configs/pine64_defconfig | 50 ------
101 files changed, 3559 deletions(-)
delete mode 100644 board/amarula/a64-relic/extlinux.conf
delete mode 100644 board/amarula/a64-relic/genimage.cfg
delete mode 100755 board/amarula/a64-relic/post-build.sh
delete mode 100644 board/amarula/a64-relic/readme.txt
delete mode 100644 board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
delete mode 100644 board/arm/juno/linux-juno-defconfig
delete mode 100644 board/arm/juno/readme.txt
delete mode 100644 board/bananapi/bananapi-m1/boot.cmd
delete mode 100644 board/bananapi/bananapi-m1/genimage.cfg
delete mode 100644 board/bananapi/bananapi-m1/readme.txt
delete mode 100644 board/bananapi/bananapi-m64/boot.cmd
delete mode 100644 board/bananapi/bananapi-m64/genimage.cfg
delete mode 100644 board/bananapi/bananapi-m64/readme.txt
delete mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
delete mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
delete mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
delete mode 100644 board/friendlyarm/nanopc-t4/readme.txt
delete mode 100644 board/friendlyarm/nanopi-a64/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-a64/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-a64/readme.txt
delete mode 100644 board/friendlyarm/nanopi-m1-plus/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-m1-plus/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-m1-plus/readme.txt
delete mode 100644 board/friendlyarm/nanopi-m1/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-m1/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-m1/readme.txt
delete mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
delete mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
delete mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
delete mode 100644 board/friendlyarm/nanopi-m4/readme.txt
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/extlinux.conf
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/linux-extras.config
delete mode 100755 board/friendlyarm/nanopi-neo-plus2/post-build.sh
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/readme.txt
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
delete mode 100644 board/friendlyarm/nanopi-neo2/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
delete mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
delete mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
delete mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
delete mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
delete mode 100644 board/friendlyarm/nanopi-r1/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-r1/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-r1/kernel/linux-extras.config
delete mode 100644 board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
delete mode 100644 board/friendlyarm/nanopi-r1/readme.txt
delete mode 100644 board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
delete mode 100644 board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
delete mode 100644 board/orangepi/orangepi-pc2/boot.cmd
delete mode 100644 board/orangepi/orangepi-pc2/genimage.cfg
delete mode 100644 board/orangepi/orangepi-pc2/readme.txt
delete mode 100644 board/orangepi/orangepi-plus/boot.cmd
delete mode 100644 board/orangepi/orangepi-plus/genimage.cfg
delete mode 100644 board/orangepi/orangepi-plus/readme.txt
delete mode 100644 board/orangepi/orangepi-prime/boot.cmd
delete mode 100644 board/orangepi/orangepi-prime/genimage.cfg
delete mode 100644 board/orangepi/orangepi-prime/readme.txt
delete mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf
delete mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg
delete mode 100755 board/orangepi/orangepi-rk3399/post-build.sh
delete mode 100644 board/orangepi/orangepi-rk3399/readme.txt
delete mode 100644 board/orangepi/orangepi-win/boot.cmd
delete mode 100644 board/orangepi/orangepi-win/genimage.cfg
delete mode 100644 board/orangepi/orangepi-win/readme.txt
delete mode 100644 board/pine64/pine64/boot.cmd
delete mode 100644 board/pine64/pine64/genimage.cfg
delete mode 100644 board/pine64/pine64/readme.txt
delete mode 100644 board/sinovoip/m1-plus/boot.cmd
delete mode 100644 board/sinovoip/m1-plus/genimage.cfg
delete mode 100644 board/sinovoip/m1-plus/linux-wifi.fragment
delete mode 100644 board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch
delete mode 100755 board/sinovoip/m1-plus/post-build.sh
delete mode 100644 board/sinovoip/m1-plus/readme.txt
delete mode 120000 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt
delete mode 100644 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt
delete mode 100644 board/sinovoip/m2-plus/boot.cmd
delete mode 100644 board/sinovoip/m2-plus/genimage.cfg
delete mode 100644 configs/amarula_a64_relic_defconfig
delete mode 100644 configs/arm_juno_defconfig
delete mode 100644 configs/bananapi_m1_defconfig
delete mode 100644 configs/bananapi_m1_plus_defconfig
delete mode 100644 configs/bananapi_m2_plus_defconfig
delete mode 100644 configs/bananapi_m64_defconfig
delete mode 100644 configs/friendlyarm_nanopc_t4_defconfig
delete mode 100644 configs/friendlyarm_nanopi_a64_defconfig
delete mode 100644 configs/friendlyarm_nanopi_m1_defconfig
delete mode 100644 configs/friendlyarm_nanopi_m1_plus_defconfig
delete mode 100644 configs/friendlyarm_nanopi_m4_defconfig
delete mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
delete mode 100644 configs/friendlyarm_nanopi_neo4_defconfig
delete mode 100644 configs/friendlyarm_nanopi_neo_plus2_defconfig
delete mode 100644 configs/friendlyarm_nanopi_r1_defconfig
delete mode 100644 configs/orangepi_pc2_defconfig
delete mode 100644 configs/orangepi_plus_defconfig
delete mode 100644 configs/orangepi_prime_defconfig
delete mode 100644 configs/orangepi_rk3399_defconfig
delete mode 100644 configs/orangepi_win_defconfig
delete mode 100644 configs/pine64_defconfig
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 01/21] configs/amarula_a64_relic: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
@ 2022-11-01 22:03 ` Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 02/21] configs/arm_juno: " Thomas Petazzoni via buildroot
` (20 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234498966
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 1 -
board/amarula/a64-relic/extlinux.conf | 4 -
board/amarula/a64-relic/genimage.cfg | 11 ---
board/amarula/a64-relic/post-build.sh | 4 -
board/amarula/a64-relic/readme.txt | 90 -------------------
.../lib/firmware/brcm/brcmfmac4330-sdio.txt | 83 -----------------
configs/amarula_a64_relic_defconfig | 63 -------------
7 files changed, 256 deletions(-)
delete mode 100644 board/amarula/a64-relic/extlinux.conf
delete mode 100644 board/amarula/a64-relic/genimage.cfg
delete mode 100755 board/amarula/a64-relic/post-build.sh
delete mode 100644 board/amarula/a64-relic/readme.txt
delete mode 100644 board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
delete mode 100644 configs/amarula_a64_relic_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index e1e919ce4f..15aa440c72 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1323,7 +1323,6 @@ F: board/orangepi/orangepi-prime/
F: board/orangepi/orangepi-win/
F: board/orangepi/orangepi-zero-plus2/
F: board/pine64/
-F: configs/amarula_a64_relic_defconfig
F: configs/amarula_vyasa_rk3288_defconfig
F: configs/asus_tinker_rk3288_defconfig
F: configs/bananapi_m1_defconfig
diff --git a/board/amarula/a64-relic/extlinux.conf b/board/amarula/a64-relic/extlinux.conf
deleted file mode 100644
index 9f469846bc..0000000000
--- a/board/amarula/a64-relic/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label linux-4.17.0-rc3
- kernel /Image
- devicetree /sun50i-a64-amarula-relic.dtb
- append console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p4 rootwait
diff --git a/board/amarula/a64-relic/genimage.cfg b/board/amarula/a64-relic/genimage.cfg
deleted file mode 100644
index 58b607f5fb..0000000000
--- a/board/amarula/a64-relic/genimage.cfg
+++ /dev/null
@@ -1,11 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-a64-amarula-relic.dtb",
- "extlinux"
- }
- }
-
- size = 64M
-}
diff --git a/board/amarula/a64-relic/post-build.sh b/board/amarula/a64-relic/post-build.sh
deleted file mode 100755
index ec20fca7d9..0000000000
--- a/board/amarula/a64-relic/post-build.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/amarula/a64-relic/readme.txt b/board/amarula/a64-relic/readme.txt
deleted file mode 100644
index 77f79e3094..0000000000
--- a/board/amarula/a64-relic/readme.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-Amarula A64 Relic
-================
-
-Amarula A64-Relic is an Allwinner A64 based IoT device, which supports:
-- Allwinner A64 Cortex-A53
-- Mali-400MP2 GPU
-- AXP803 PMIC
-- 1GB DDR3 RAM
-- 8GB eMMC
-- AP6330 Wifi/BLE
-- MIPI-DSI
-- CSI: OV5640 sensor
-- USB OTG
-- 12V DC power supply
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Amarual+A64-Relic
-
-Build
-=====
-
- $ make amarula_a64_relic_defconfig
-
- $ make
-
-build files at output/images/:
- - sunxi-spl.bin
- - u-boot.itb
- - Image
- - sun50i-a64-amarula-relic.dtb
- - boot.vfat
- - rootfs.ext4
-
-Write eMMC
-=========
-
-The board comes with an operating system preloaded on the eMMC.
-To replace it with the Buildroot-built system, take the following
-steps
-
-1. Connect the board UART with host and open minicom(ttyUSBx/115200N8)
-
-2. Supply 12V DC for power-on the board.
-
-3. Interrupt U-Boot by pressing enter
-
-4. Create GPT partitions
- => mmc dev 1
- => gpt write mmc 1 $partitions
-
-5. Connect the board USB-OTG with USB slot on the host.
-
-6. Initiate fastboot
- => fastboot 0
-
-7. Write images from host onto eMMC using fastboot
- $ cd output/images
- $ sudo fastboot -i 0x1f3a flash loader1 sunxi-spl.bin
- $ sudo fastboot -i 0x1f3a flash loader2 u-boot.itb
- $ sudo fastboot -i 0x1f3a flash esp boot.vfat
- $ sudo fastboot -i 0x1f3a flash system rootfs.ext4
-
-Update eMMC during Development
-==============================
-
-During development, reflashing the entire filesystem image at every
-change is time consuming. A useful alternative is to directly access
-over USB the filesystem stored on the eMMC, using the USB Mass Storage
-capability of U-Boot. To achieve this:
-
-1. Build U-Boot by enabling UMS
- $ make uboot-menuconfig
- (select CONFIG_CMD_USB_MASS_STORAGE=y)
-
-2. Follow all 6 steps from 'Write eMMC' and mount eMMC on host
- => mmc dev 1
- => ums 0 mmc 1
-
-WiFi
-====
-
- # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
- (type password and enter)
- # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
- # udhcpc -i wlan0
- # ping google.com
-
---
-Jagan Teki <jagan@amarulasolutions.com>
-29-Jun-2018
diff --git a/board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt b/board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
deleted file mode 100644
index d095f24c26..0000000000
--- a/board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-#AP6330_NVRAM_V1.0_20121130
-#Sample variables file for BCM94330 SD FC AGB board
-manfid=0x2d0
-prodid=0x0547
-vendid=0x14e4
-devid=0x4360
-boardtype=0x05e1
-boardrev=0x1202
-boardflags=0x0080200
-nocrc=1
-xtalfreq=26000
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-ag0=254
-aa2g=1
-ccode=ALL
-pa0itssit=0x20
-pa0b0=5587
-pa0b1=-633
-pa0b2=-158
-rssismf2g=0xa
-rssismc2g=0x3
-rssisav2g=0x7
-#rssi params for 5GHz
-rssismf5g=0x4
-rssismc5g=0x3
-rssisav5g=0x7
-#PA parameters for lower a-band
-pa1lob0=4748
-pa1lob1=-566
-pa1lob2=-180
-#PA parameters for midband
-pa1b0=4762
-pa1b1=-593
-pa1b2=-172
-#PA parameters for high band
-#pa1hib0=4596
-pa1hib0=4666
-pa1hib1=-619
-pa1hib2=-163
-rxpo5g=0
-maxp2ga0=74
-maxp5ga0=66
-maxp5gla0=66
-maxp5gha0=66
-# 2.4G Tx Power offsets
-cck2gpo=0x2222
-ofdm2gpo=0x44444444
-mcs2gpo0=0x6666
-mcs2gpo1=0x6666
-# 5G Tx Power offsets
-ofdm5gpo=0x44444444
-ofdm5glpo=0x44444444
-ofdm5ghpo=0x44444444
-mcs5gpo0=0x6666
-mcs5gpo1=0x6666
-mcs5glpo0=0x6666
-mcs5glpo1=0x6666
-mcs5ghpo0=0x6666
-mcs5ghpo1=0x6666
-sromrev=3
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-cckPwrOffset=4
-swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x18282,0x1ff
-triso5g=0
-swctrlmap_5g=0x00100010,0x20202020,0x20202020,0x14202,0x0f0
-rfreg033=0x19
-rfreg033_cck=0x1f
-dacrate2g=160
-dacrate5g=160
-txalpfbyp2g=1
-bphyscale=17
-cckPwrIdxCorr=-15
-pacalidx2g=50
-#pacalidx5g=20
-noise_cal_ref_2g=53
-noise_cal_po_2g=0
-noise_cal_ref_5g=52
-noise_cal_po_5g=5,0,0
-# 4330 OOB parameter: High level trigger
-muxenab=0x10
-
diff --git a/configs/amarula_a64_relic_defconfig b/configs/amarula_a64_relic_defconfig
deleted file mode 100644
index 304a3ef824..0000000000
--- a/configs/amarula_a64_relic_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 4.17 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_17=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="amarula_a64_relic"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,amarula,linux-amarula,v1.0a)/linux-amarula_v1.0a.tar.gz"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-amarula-relic"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Amarula A64-Relic"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_ANDROID_TOOLS=y
-BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/a64-relic/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/a64-relic/post-build.sh"
-BR2_ROOTFS_OVERLAY="board/amarula/a64-relic/rootfs_overlay"
-
-# wireless firmware
-BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
-
-# wireless tools
-BR2_PACKAGE_IW=y
-BR2_PACKAGE_WPA_SUPPLICANT=y
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
-BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
-BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 02/21] configs/arm_juno: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 01/21] configs/amarula_a64_relic: remove defconfig Thomas Petazzoni via buildroot
@ 2022-11-01 22:03 ` Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 03/21] configs/bananapi_m1: " Thomas Petazzoni via buildroot
` (19 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Gustavo Pimentel, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234498972
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 4 -
board/arm/juno/linux-juno-defconfig | 169 ----------------------------
board/arm/juno/readme.txt | 134 ----------------------
configs/arm_juno_defconfig | 23 ----
4 files changed, 330 deletions(-)
delete mode 100644 board/arm/juno/linux-juno-defconfig
delete mode 100644 board/arm/juno/readme.txt
delete mode 100644 configs/arm_juno_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 15aa440c72..3e03dd51f5 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1226,10 +1226,6 @@ F: support/testing/tests/package/test_python_scipy.py
N: Gustavo Heinz <gustavo@gsthnz.com>
F: package/python-m2crypto/
-N: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
-F: configs/arm_juno_defconfig
-F: board/arm/juno/
-
N: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
F: board/terasic/de10nano_cyclone5/
F: configs/terasic_de10nano_cyclone5_defconfig
diff --git a/board/arm/juno/linux-juno-defconfig b/board/arm/juno/linux-juno-defconfig
deleted file mode 100644
index 64598d21a1..0000000000
--- a/board/arm/juno/linux-juno-defconfig
+++ /dev/null
@@ -1,169 +0,0 @@
-CONFIG_SMP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NR_CPUS=6
-CONFIG_PREEMPT=y
-CONFIG_KSM=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_CMA=y
-CONFIG_CMDLINE="console=ttyAMA0"
-CONFIG_COMPAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
-CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
-CONFIG_ARM_DT_BL_CPUFREQ=y
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_BPF_JIT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_XGENE=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_OF_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_SKY2=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_SLAVE=y
-CONFIG_SPI=y
-CONFIG_SPI_PL022=y
-CONFIG_PTP_1588_CLOCK=m
-CONFIG_GPIO_PL061=y
-CONFIG_GPIO_XGENE=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VEXPRESS=m
-CONFIG_DRM=y
-CONFIG_DRM_I2C_NXP_TDA998X=y
-CONFIG_DRM_ARM=y
-CONFIG_DRM_HDLCD=y
-CONFIG_DRM_VIRTUAL_HDLCD=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_ISP1760=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_PL030=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_DMADEVICES=y
-CONFIG_PL330_DMA=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_MAILBOX=y
-CONFIG_ARM_MHU=y
-CONFIG_PHY_XGENE=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_DESIGNWARE_I2S=y
-CONFIG_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64
diff --git a/board/arm/juno/readme.txt b/board/arm/juno/readme.txt
deleted file mode 100644
index b292d9636d..0000000000
--- a/board/arm/juno/readme.txt
+++ /dev/null
@@ -1,134 +0,0 @@
-ARM Juno r1/r0
-
-Intro
-=====
-
-These instructions apply to all models of the ARM Juno:
- - Juno r0 (does not support PCIe)
- - Juno r1 (supports PCIe)
- - Juno r2 (Big Cluster with A72)
-
-Buildroot will generate the kernel image, device tree blob, bootloader binaries
-and a minimal root filesystem.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-Configuring Buildroot is pretty simple, just execute:
-
- $ make arm_juno_defconfig
-
-Build the rootfs, kernel and DTB
---------------------------------
-
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
-You may now build your rootfs with:
-
- $ make
-
-(This may take a while)
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
- output/images/
- +-- rootfs.tar
- +-- juno.dtb (if Juno r0 is used)
- +-- juno-r1.dtb (if Juno r1 is used)
- +-- juno-r2.dtb (if Juno r2 is used)
- +-- Image
- +-- bl1.bin
- +-- bl2.bin
- +-- bl2u.bin
- +-- bl31.bin
- +-- fip.bin
- +-- scp-fw.bin
- +-- u-boot.bin
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
- $ mkfs.ext3 /dev/<your device>
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
- $ mkfs.ext3 /dev/<your device>
-
-Installing your rootfs
-======================
-
-After mounting the pen drive please execute the following:
-
- $ sudo tar -xvf output/images/rootfs.tar -C <pen drive mount path>
-
-When completed make sure to unmount the device:
-
- $ umount <pen drive mount path>
-
-Insert the pen drive in one of the ARM Juno' USB type A connectors.
-
-Configure *.dtb in the boot configuration for Juno r0
-=====================================================
-
-SITE1/HBI0262B/images.txt
-.....
-NOR3UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x00C00000 ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno.dtb ;Image File Name
-NOR3NAME: board.dtb ;Specify Image name to preserve file extension
-NOR3LOAD: 00000000 ;Image Load Address
-NOR3ENTRY: 00000000 ;Image Entry Point
-......
-
-Configure *.dtb in the boot configuration for Juno r1
-=====================================================
-
-SITE1/HBI0262C/images.txt
-......
-NOR3UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x00C00000 ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r1.dtb ;Image File Name
-NOR3NAME: board.dtb ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000 ;Image Load Address
-NOR3ENTRY: 00000000 ;Image Entry Point
-......
-
-Configure *.dtb in the boot configuration for Juno r2
-=====================================================
-
-SITE1/HBI0262D/images.txt
-......
-NOR3UPDATE: AUTO ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x02000000 ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r2.dtb ;Image File Name
-NOR3NAME: board.dtb ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000 ;Image Load Address
-NOR3ENTRY: 00000000 ;Image Entry Point
-......
-
-Installing kernel image and DTB
-===============================
-
-1. Connect to the ARM Juno UART0 and execute USB_ON in the terminal
-2. Connect a USB cable between your PC and ARM Juno USB type B connector
- A mass storage device should appear in your desktop.
-3. Open the software/ folder
-4. Copy the 'Image' file to software/
-5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
-6. Copy the bootloader binaries (bl1.bin and fip.bin) to software/
-7. Press the red button in the front pannel of ARM Juno
-
-At this time, the board will erase the Flash entry for each new item and
-replace it with the lastest ones.
diff --git a/configs/arm_juno_defconfig b/configs/arm_juno_defconfig
deleted file mode 100644
index 5832986779..0000000000
--- a/configs/arm_juno_defconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-BR2_aarch64=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
-BR2_TARGET_GENERIC_HOSTNAME="juno-buildroot"
-BR2_TARGET_GENERIC_ISSUE="Welcome to SNPS Juno by Buildroot"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/arm/juno/linux-juno-defconfig"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/juno arm/juno-r1 arm/juno-r2"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v1.4"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="juno"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="vexpress_aemv8a_juno"
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.03"
-BR2_TARGET_VEXPRESS_FIRMWARE=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 03/21] configs/bananapi_m1: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 01/21] configs/amarula_a64_relic: remove defconfig Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 02/21] configs/arm_juno: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:03 ` Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 04/21] configs/bananapi_m1_plus: " Thomas Petazzoni via buildroot
` (18 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499003
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 1 -
board/bananapi/bananapi-m1/boot.cmd | 7 -----
board/bananapi/bananapi-m1/genimage.cfg | 34 -----------------------
board/bananapi/bananapi-m1/readme.txt | 37 -------------------------
configs/bananapi_m1_defconfig | 29 -------------------
5 files changed, 108 deletions(-)
delete mode 100644 board/bananapi/bananapi-m1/boot.cmd
delete mode 100644 board/bananapi/bananapi-m1/genimage.cfg
delete mode 100644 board/bananapi/bananapi-m1/readme.txt
delete mode 100644 configs/bananapi_m1_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 3e03dd51f5..9b1932ac61 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1321,7 +1321,6 @@ F: board/orangepi/orangepi-zero-plus2/
F: board/pine64/
F: configs/amarula_vyasa_rk3288_defconfig
F: configs/asus_tinker_rk3288_defconfig
-F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
F: configs/engicam_imx6qdl_icore_qt5_defconfig
diff --git a/board/bananapi/bananapi-m1/boot.cmd b/board/bananapi/bananapi-m1/boot.cmd
deleted file mode 100644
index 0cf6f4d63e..0000000000
--- a/board/bananapi/bananapi-m1/boot.cmd
+++ /dev/null
@@ -1,7 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-mmc dev 0
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-bananapi.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/bananapi/bananapi-m1/genimage.cfg b/board/bananapi/bananapi-m1/genimage.cfg
deleted file mode 100644
index ce62fbf712..0000000000
--- a/board/bananapi/bananapi-m1/genimage.cfg
+++ /dev/null
@@ -1,34 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "zImage",
- "sun7i-a20-bananapi.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot-sunxi-with-spl.bin"
- offset = 8K
- size = 1016K # 1MB - 8KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/bananapi/bananapi-m1/readme.txt b/board/bananapi/bananapi-m1/readme.txt
deleted file mode 100644
index 382ba63c49..0000000000
--- a/board/bananapi/bananapi-m1/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Bananapi M1 link:
-http://www.banana-pi.org/m1.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M1
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make bananapi_m1_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Bananapi M1 and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/bananapi_m1_defconfig b/configs/bananapi_m1_defconfig
deleted file mode 100644
index 23da363345..0000000000
--- a/configs/bananapi_m1_defconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y
-BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M1"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m1/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.12"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-bananapi"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Bananapi"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m1/boot.cmd"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 04/21] configs/bananapi_m1_plus: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (2 preceding siblings ...)
2022-11-01 22:03 ` [Buildroot] [PATCH 03/21] configs/bananapi_m1: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:03 ` Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 05/21] configs/bananapi_m2_plus: " Thomas Petazzoni via buildroot
` (17 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Filip Skoneczny, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499004
Cc: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 4 --
board/sinovoip/m1-plus/boot.cmd | 5 --
board/sinovoip/m1-plus/genimage.cfg | 38 -----------
board/sinovoip/m1-plus/linux-wifi.fragment | 10 ---
...nanapi-m1-plus-Disable-OOB-IRQ-for-b.patch | 39 -----------
board/sinovoip/m1-plus/post-build.sh | 4 --
board/sinovoip/m1-plus/readme.txt | 64 -------------------
...rcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt | 1 -
.../lib/firmware/brcm/brcmfmac43362-sdio.txt | 56 ----------------
configs/bananapi_m1_plus_defconfig | 45 -------------
10 files changed, 266 deletions(-)
delete mode 100644 board/sinovoip/m1-plus/boot.cmd
delete mode 100644 board/sinovoip/m1-plus/genimage.cfg
delete mode 100644 board/sinovoip/m1-plus/linux-wifi.fragment
delete mode 100644 board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch
delete mode 100755 board/sinovoip/m1-plus/post-build.sh
delete mode 100644 board/sinovoip/m1-plus/readme.txt
delete mode 120000 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt
delete mode 100644 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt
delete mode 100644 configs/bananapi_m1_plus_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 9b1932ac61..dc968f9c4f 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1009,10 +1009,6 @@ F: configs/freescale_imx6ullevk_defconfig
N: Falco Hyfing <hyfinglists@gmail.com>
F: package/python-pymodbus/
-N: Filip Skoneczny <fskoneczny@gmail.com>
-F: board/sinovoip/m1-plus
-F: configs/bananapi_m1_plus_defconfig
-
N: Florian Fainelli <f.fainelli@gmail.com>
F: package/cpulimit/
diff --git a/board/sinovoip/m1-plus/boot.cmd b/board/sinovoip/m1-plus/boot.cmd
deleted file mode 100644
index 4829996474..0000000000
--- a/board/sinovoip/m1-plus/boot.cmd
+++ /dev/null
@@ -1,5 +0,0 @@
-setenv fdt_high ffffffff
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-bananapi-m1-plus.dtb
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/sinovoip/m1-plus/genimage.cfg b/board/sinovoip/m1-plus/genimage.cfg
deleted file mode 100644
index 18a549e631..0000000000
--- a/board/sinovoip/m1-plus/genimage.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-# Minimal SD card image for the Banana Pi M1+
-# Based on the Banana Pro genimage.cfg
-
-image boot.vfat {
- vfat {
- files = {
- "zImage",
- "sun7i-a20-bananapi-m1-plus.dtb",
- "boot.scr"
- }
- }
-
- size = 10M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot-sunxi-with-spl.bin"
- offset = 8K
- size = 1016K # 1MB - 8KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- size = 512M
- }
-}
diff --git a/board/sinovoip/m1-plus/linux-wifi.fragment b/board/sinovoip/m1-plus/linux-wifi.fragment
deleted file mode 100644
index 5576d738ad..0000000000
--- a/board/sinovoip/m1-plus/linux-wifi.fragment
+++ /dev/null
@@ -1,10 +0,0 @@
-# Networking support
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_RFKILL=y
-
-# Network device support
-CONFIG_WLAN=y
-CONFIG_WLAN_VENDOR_BROADCOM=y
-CONFIG_BRCMFMAC=m
diff --git a/board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch b/board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch
deleted file mode 100644
index b01b6b2829..0000000000
--- a/board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 58bae4096a7bf8d5d3bfbddb82cb37dd0561c938 Mon Sep 17 00:00:00 2001
-From: Filip Skoneczny <fskoneczny@gmail.com>
-Date: Sun, 10 Jan 2021 19:07:14 +0100
-Subject: [PATCH] ARM: dts: sun7i: bananapi-m1-plus: Disable OOB IRQ for brcm
- wifi module
-
- Based on 23bc805.
- BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908438
-
-Signed-off-by: Filip Skoneczny <fskoneczny@gmail.com>
----
- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
-index 32d5d45a35c0..97f9987f51d7 100644
---- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
-@@ -193,9 +193,14 @@ &mmc3 {
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
-- interrupt-parent = <&pio>;
-- interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
-- interrupt-names = "host-wake";
-+ /*
-+ * OOB interrupt support is broken ATM, drv probe failing with:
-+ * ieee80211 phy0: brcmf_attach: dongle is not responding: err=-110
-+ *
-+ * interrupt-parent = <&pio>;
-+ * interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
-+ * interrupt-names = "host-wake";
-+ */
- };
- };
-
---
-2.25.1
-
diff --git a/board/sinovoip/m1-plus/post-build.sh b/board/sinovoip/m1-plus/post-build.sh
deleted file mode 100755
index 4ee6fa3bc4..0000000000
--- a/board/sinovoip/m1-plus/post-build.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-
-# Remove all but the brcmfmac43362 firmware files
-find $TARGET_DIR/lib/firmware/brcm -type f -not -name "brcmfmac43362*" -delete
diff --git a/board/sinovoip/m1-plus/readme.txt b/board/sinovoip/m1-plus/readme.txt
deleted file mode 100644
index ae647c21a9..0000000000
--- a/board/sinovoip/m1-plus/readme.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Banana Pi M1+
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-Buildroot environment for the Banana Pi M1+. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
- $ make bananapi_m1_plus_defconfig
-
-Compile everything and build the SD card image:
-
- $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ dd if=output/images/sdcard.img of=/dev/sdX
-
-Notes:
- - replace 'sdX' with the actual device with your micro SD card
- - you may need to be root to do that (use 'sudo')
-
-Insert the micro SD card in your Banana Pi M1+ and power it up. The console
-is on the debug TTL UART, 115200 8N1.
-
-Ethernet
-==========
-
- # udhcpc -i eth0
-
-Wifi
-==========
-
- # wpa_passphrase YOUR_SSID >> /etc/wpa_supplicant.conf
- (enter the wifi password and press enter)
- # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
- # udhcpc -i wlan0
-
-Note:
- - replace 'YOUR_SSID' with the actual SSID from your access point
-
-Audio
-==========
-
-For this example you need package alsa-utils.
-
-Connect a headphone to the 3.5mm jack (TRRS). Note, that the Banana Pi M1+
-has an on-board microphone, too.
-
- # amixer cset name='Power Amplifier DAC Playback Switch' on
- # amixer cset name='Power Amplifier Mute Switch' on
- # amixer cset name='Power Amplifier Volume' 42
diff --git a/board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt b/board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt
deleted file mode 120000
index 93947975ee..0000000000
--- a/board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt
+++ /dev/null
@@ -1 +0,0 @@
-brcmfmac43362-sdio.txt
\ No newline at end of file
diff --git a/board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt b/board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt
deleted file mode 100644
index 14a554fdd8..0000000000
--- a/board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-#AP6210_NVRAM_V1.2_03192013
-manfid=0x2d0
-prodid=0x492
-vendid=0x14e4
-devid=0x4343
-boardtype=0x0598
-
-# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
-#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
-boardrev=0x1307
-boardnum=777
-xtalfreq=26000
-boardflags=0x80201
-boardflags2=0x80
-sromrev=3
-wl0id=0x431b
-macaddr=00:90:4c:07:71:12
-aa2g=1
-ag0=2
-maxp2ga0=74
-cck2gpo=0x2222
-ofdm2gpo=0x44444444
-mcs2gpo0=0x6666
-mcs2gpo1=0x6666
-pa0maxpwr=56
-
-#P207 PA params
-#pa0b0=5447
-#pa0b1=-658
-#pa0b2=-175
-
-#Same PA params for P304,P305, P306, P307
-
-pa0b0=5447
-pa0b1=-607
-pa0b2=-160
-pa0itssit=62
-pa1itssit=62
-
-
-cckPwrOffset=5
-ccode=0
-rssismf2g=0xa
-rssismc2g=0x3
-rssisav2g=0x7
-triso2g=0
-noise_cal_enable_2g=0
-noise_cal_po_2g=0
-swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
-temp_add=29767
-temp_mult=425
-
-btc_flags=0x6
-btc_params0=5000
-btc_params1=1000
-btc_params6=63
diff --git a/configs/bananapi_m1_plus_defconfig b/configs/bananapi_m1_plus_defconfig
deleted file mode 100644
index 271124f79a..0000000000
--- a/configs/bananapi_m1_plus_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_FPU_NEON_VFPV4=y
-BR2_GLOBAL_PATCH_DIR="board/sinovoip/m1-plus/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
-BR2_TARGET_GENERIC_HOSTNAME="bananapi"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Banana Pi!"
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
-BR2_ROOTFS_OVERLAY="board/sinovoip/m1-plus/rootfs_overlay"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/sinovoip/m1-plus/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sinovoip/m1-plus/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.3"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/sinovoip/m1-plus/linux-wifi.fragment"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-bananapi-m1-plus"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
-BR2_PACKAGE_IW=y
-BR2_PACKAGE_WPA_SUPPLICANT=y
-BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
-BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m1_plus"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/sinovoip/m1-plus/boot.cmd"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 05/21] configs/bananapi_m2_plus: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (3 preceding siblings ...)
2022-11-01 22:03 ` [Buildroot] [PATCH 04/21] configs/bananapi_m1_plus: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:03 ` Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 06/21] configs/bananapi_m64: " Thomas Petazzoni via buildroot
` (16 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Mike Harmony, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499005
Cc: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 4 ----
board/sinovoip/m2-plus/boot.cmd | 7 ------
board/sinovoip/m2-plus/genimage.cfg | 34 -----------------------------
configs/bananapi_m2_plus_defconfig | 30 -------------------------
4 files changed, 75 deletions(-)
delete mode 100644 board/sinovoip/m2-plus/boot.cmd
delete mode 100644 board/sinovoip/m2-plus/genimage.cfg
delete mode 100644 configs/bananapi_m2_plus_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index dc968f9c4f..4eade50385 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2145,10 +2145,6 @@ F: configs/licheepi_zero_defconfig
N: Mike Frampton <mikeframpo@gmail.com>
F: package/qcom-db410c-firmware/
-N: Mike Harmony <mike.harmony@snapav.com>
-F: board/sinovoip/m2-plus/
-F: configs/bananapi_m2_plus_defconfig
-
N: Mikhail Boiko <mikhailboiko85@gmail.com>
F: package/libfribidi/
diff --git a/board/sinovoip/m2-plus/boot.cmd b/board/sinovoip/m2-plus/boot.cmd
deleted file mode 100644
index d22464a1c1..0000000000
--- a/board/sinovoip/m2-plus/boot.cmd
+++ /dev/null
@@ -1,7 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-mmc dev 0
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-bananapi-m2-plus.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/sinovoip/m2-plus/genimage.cfg b/board/sinovoip/m2-plus/genimage.cfg
deleted file mode 100644
index 9311e026dd..0000000000
--- a/board/sinovoip/m2-plus/genimage.cfg
+++ /dev/null
@@ -1,34 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "zImage",
- "sun8i-h3-bananapi-m2-plus.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot-sunxi-with-spl.bin"
- offset = 8K
- size = 1016K # 1MB - 8KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/configs/bananapi_m2_plus_defconfig b/configs/bananapi_m2_plus_defconfig
deleted file mode 100644
index 77a403ce81..0000000000
--- a/configs/bananapi_m2_plus_defconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Plus"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sinovoip/m2-plus/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-bananapi-m2-plus"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Sinovoip_BPI_M2_Plus"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/sinovoip/m2-plus/boot.cmd"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 06/21] configs/bananapi_m64: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (4 preceding siblings ...)
2022-11-01 22:03 ` [Buildroot] [PATCH 05/21] configs/bananapi_m2_plus: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:03 ` Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 07/21] configs/friendlyarm_nanopc_t4: " Thomas Petazzoni via buildroot
` (15 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499008
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 1 -
board/bananapi/bananapi-m64/boot.cmd | 6 ---
board/bananapi/bananapi-m64/genimage.cfg | 40 -------------------
board/bananapi/bananapi-m64/readme.txt | 37 ------------------
configs/bananapi_m64_defconfig | 50 ------------------------
5 files changed, 134 deletions(-)
delete mode 100644 board/bananapi/bananapi-m64/boot.cmd
delete mode 100644 board/bananapi/bananapi-m64/genimage.cfg
delete mode 100644 board/bananapi/bananapi-m64/readme.txt
delete mode 100644 configs/bananapi_m64_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 4eade50385..3680dbe31b 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1317,7 +1317,6 @@ F: board/orangepi/orangepi-zero-plus2/
F: board/pine64/
F: configs/amarula_vyasa_rk3288_defconfig
F: configs/asus_tinker_rk3288_defconfig
-F: configs/bananapi_m64_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
F: configs/engicam_imx6qdl_icore_qt5_defconfig
F: configs/engicam_imx6qdl_icore_rqs_defconfig
diff --git a/board/bananapi/bananapi-m64/boot.cmd b/board/bananapi/bananapi-m64/boot.cmd
deleted file mode 100644
index d35c9b0b2c..0000000000
--- a/board/bananapi/bananapi-m64/boot.cmd
+++ /dev/null
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-a64-bananapi-m64.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/bananapi/bananapi-m64/genimage.cfg b/board/bananapi/bananapi-m64/genimage.cfg
deleted file mode 100644
index e922c0dba2..0000000000
--- a/board/bananapi/bananapi-m64/genimage.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-a64-bananapi-m64.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/bananapi/bananapi-m64/readme.txt b/board/bananapi/bananapi-m64/readme.txt
deleted file mode 100644
index 0dec3e52ee..0000000000
--- a/board/bananapi/bananapi-m64/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M64. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Bananapi M64 link:
-http://www.banana-pi.org/m64.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M64
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make bananapi_m64_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Bananapi M64 and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
deleted file mode 100644
index b93332ed21..0000000000
--- a/configs/bananapi_m64_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m64"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m64/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-bananapi-m64"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M64"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m64/genimage.cfg"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 07/21] configs/friendlyarm_nanopc_t4: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (5 preceding siblings ...)
2022-11-01 22:03 ` [Buildroot] [PATCH 06/21] configs/bananapi_m64: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:03 ` Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 08/21] configs/friendlyarm_nanopi_a64: " Thomas Petazzoni via buildroot
` (14 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Thomas Petazzoni, Suniel Mahesh
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499048
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/friendlyarm/nanopc-t4/extlinux.conf | 4 --
board/friendlyarm/nanopc-t4/genimage.cfg | 39 -----------------
board/friendlyarm/nanopc-t4/post-build.sh | 5 ---
board/friendlyarm/nanopc-t4/readme.txt | 45 -------------------
configs/friendlyarm_nanopc_t4_defconfig | 53 -----------------------
6 files changed, 148 deletions(-)
delete mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
delete mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
delete mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
delete mode 100644 board/friendlyarm/nanopc-t4/readme.txt
delete mode 100644 configs/friendlyarm_nanopc_t4_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 3680dbe31b..742f5d708a 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2748,14 +2748,12 @@ F: package/powertop/
N: Suniel Mahesh <sunil@amarulasolutions.com>
F: board/firefly/
-F: board/friendlyarm/nanopc-t4
F: board/friendlyarm/nanopi-m4
F: board/orangepi/orangepi-rk3399
F: board/pine64/rockpro64
F: board/radxa/rockpi-4
F: board/radxa/rockpi-n8
F: board/radxa/rockpi-n10
-F: configs/friendlyarm_nanopc_t4_defconfig
F: configs/friendlyarm_nanopi_m4_defconfig
F: configs/orangepi_rk3399_defconfig
F: configs/roc_pc_rk3399_defconfig
diff --git a/board/friendlyarm/nanopc-t4/extlinux.conf b/board/friendlyarm/nanopc-t4/extlinux.conf
deleted file mode 100644
index 31c6b30d32..0000000000
--- a/board/friendlyarm/nanopc-t4/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label RK3399_NanoPC_T4 linux
- kernel /Image
- devicetree /rk3399-nanopc-t4.dtb
- append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rootwait
diff --git a/board/friendlyarm/nanopc-t4/genimage.cfg b/board/friendlyarm/nanopc-t4/genimage.cfg
deleted file mode 100644
index 1787322260..0000000000
--- a/board/friendlyarm/nanopc-t4/genimage.cfg
+++ /dev/null
@@ -1,39 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "rk3399-nanopc-t4.dtb",
- "extlinux"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- partition-table-type = "gpt"
- }
-
- partition loader1 {
- image = "idbloader.img"
- offset = 32K
- }
-
- partition loader2 {
- image = "u-boot.itb"
- offset = 8M
- }
-
- partition boot {
- partition-type-uuid = F
- bootable = "true"
- image = "boot.vfat"
- offset = 16M
- }
-
- partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
- image = "rootfs.ext4"
- }
-}
diff --git a/board/friendlyarm/nanopc-t4/post-build.sh b/board/friendlyarm/nanopc-t4/post-build.sh
deleted file mode 100755
index ba29375c05..0000000000
--- a/board/friendlyarm/nanopc-t4/post-build.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopc-t4/readme.txt b/board/friendlyarm/nanopc-t4/readme.txt
deleted file mode 100644
index 0989c6cc1e..0000000000
--- a/board/friendlyarm/nanopc-t4/readme.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-FriendlyARM NANOPC-T4
-=====================
-
-Build:
-
- $ make friendlyarm_nanopc_t4_defconfig
- $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── boot.vfat
-├── extlinux
-├── idbloader.img
-├── Image
-├── rk3399-nanopc-t4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
---------------
-
-Baudrate for this board is 1500000
-
-Login:
-------
-Apply power and press the PWR button for 3 sec. Enter 'root' as login user, and the prompt is ready.
-
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/npc_t4.html
diff --git a/configs/friendlyarm_nanopc_t4_defconfig b/configs/friendlyarm_nanopc_t4_defconfig
deleted file mode 100644
index 2f7c53904e..0000000000
--- a/configs/friendlyarm_nanopc_t4_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# Architecture
-BR2_aarch64=y
-BR2_cortex_a72_a53=y
-
-# Linux headers same as kernel, a 5.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopc-t4-rk3399"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.2"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopc-t4"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="nanopc-t4"
-BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPC-T4"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopc-t4/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopc-t4/post-build.sh"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 08/21] configs/friendlyarm_nanopi_a64: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (6 preceding siblings ...)
2022-11-01 22:03 ` [Buildroot] [PATCH 07/21] configs/friendlyarm_nanopc_t4: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:03 ` Thomas Petazzoni via buildroot
2022-11-01 22:18 ` [Buildroot] [PATCH 09/21] configs/friendlyarm_nanopi_m1: " Thomas Petazzoni via buildroot
` (13 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:03 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499049
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/friendlyarm/nanopi-a64/boot.cmd | 6 ---
board/friendlyarm/nanopi-a64/genimage.cfg | 40 ------------------
board/friendlyarm/nanopi-a64/readme.txt | 37 -----------------
configs/friendlyarm_nanopi_a64_defconfig | 50 -----------------------
5 files changed, 135 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-a64/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-a64/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-a64/readme.txt
delete mode 100644 configs/friendlyarm_nanopi_a64_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 742f5d708a..479189c166 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1304,7 +1304,6 @@ F: board/amarula/
F: board/asus/
F: board/bananapi/
F: board/engicam/
-F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a33_olinuxino/
F: board/olimex/a64-olinuxino/
@@ -1322,7 +1321,6 @@ F: configs/engicam_imx6qdl_icore_qt5_defconfig
F: configs/engicam_imx6qdl_icore_rqs_defconfig
F: configs/engicam_imx6ul_geam_defconfig
F: configs/engicam_imx6ul_isiot_defconfig
-F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a33_olinuxino_defconfig
F: configs/olimex_a64_olinuxino_defconfig
diff --git a/board/friendlyarm/nanopi-a64/boot.cmd b/board/friendlyarm/nanopi-a64/boot.cmd
deleted file mode 100644
index 446bd85672..0000000000
--- a/board/friendlyarm/nanopi-a64/boot.cmd
+++ /dev/null
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-a64-nanopi-a64.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-a64/genimage.cfg b/board/friendlyarm/nanopi-a64/genimage.cfg
deleted file mode 100644
index 6907314149..0000000000
--- a/board/friendlyarm/nanopi-a64/genimage.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-a64-nanopi-a64.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/friendlyarm/nanopi-a64/readme.txt b/board/friendlyarm/nanopi-a64/readme.txt
deleted file mode 100644
index 88c4e661cb..0000000000
--- a/board/friendlyarm/nanopi-a64/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Nanopi A64. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Nanopi A64 link:
-http://nanopi.io/nanopi-a64.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/FriendlyARM+Nanopi+A64
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make friendlyarm_nanopi_a64_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Nanopi A64 and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/friendlyarm_nanopi_a64_defconfig b/configs/friendlyarm_nanopi_a64_defconfig
deleted file mode 100644
index 4df22b2a2f..0000000000
--- a/configs/friendlyarm_nanopi_a64_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_a64"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-a64/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-nanopi-a64"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi A64"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-a64/genimage.cfg"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 09/21] configs/friendlyarm_nanopi_m1: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (7 preceding siblings ...)
2022-11-01 22:03 ` [Buildroot] [PATCH 08/21] configs/friendlyarm_nanopi_a64: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:18 ` Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 10/21] " Thomas Petazzoni via buildroot
` (12 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:18 UTC (permalink / raw)
To: buildroot; +Cc: Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499050
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
board/friendlyarm/nanopi-m1/boot.cmd | 8 -----
board/friendlyarm/nanopi-m1/genimage.cfg | 37 -------------------
board/friendlyarm/nanopi-m1/readme.txt | 29 ---------------
configs/friendlyarm_nanopi_m1_defconfig | 45 ------------------------
4 files changed, 119 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-m1/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-m1/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-m1/readme.txt
delete mode 100644 configs/friendlyarm_nanopi_m1_defconfig
diff --git a/board/friendlyarm/nanopi-m1/boot.cmd b/board/friendlyarm/nanopi-m1/boot.cmd
deleted file mode 100644
index b4d612ede7..0000000000
--- a/board/friendlyarm/nanopi-m1/boot.cmd
+++ /dev/null
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-m1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-m1/genimage.cfg b/board/friendlyarm/nanopi-m1/genimage.cfg
deleted file mode 100644
index 3b2b82ce96..0000000000
--- a/board/friendlyarm/nanopi-m1/genimage.cfg
+++ /dev/null
@@ -1,37 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
- vfat {
- files = {
- "zImage",
- "sun8i-h3-nanopi-m1.dtb",
- "boot.scr"
- }
- }
-
- size = 10M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot-sunxi-with-spl.bin"
- offset = 8K
- size = 1016K # 1MB - 8KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- size = 512M
- }
-}
diff --git a/board/friendlyarm/nanopi-m1/readme.txt b/board/friendlyarm/nanopi-m1/readme.txt
deleted file mode 100644
index 6a34c4239d..0000000000
--- a/board/friendlyarm/nanopi-m1/readme.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-NanoPi M1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi M1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
- $ make friendlyarm_nanopi_m1_defconfig
-
-Compile everything and build the SD card image:
-
- $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
diff --git a/configs/friendlyarm_nanopi_m1_defconfig b/configs/friendlyarm_nanopi_m1_defconfig
deleted file mode 100644
index 18cfcb261e..0000000000
--- a/configs/friendlyarm_nanopi_m1_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System configuration
-BR2_TARGET_GENERIC_HOSTNAME="nanopi-m1"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi M1"
-
-# Bootloaders
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_m1"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-m1/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-m1"
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-m1/genimage.cfg"
-# BR2_TARGET_ROOTFS_TAR is not set
-
-# Additional tools
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 10/21] configs/friendlyarm_nanopi_m1: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (8 preceding siblings ...)
2022-11-01 22:18 ` [Buildroot] [PATCH 09/21] configs/friendlyarm_nanopi_m1: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:19 ` Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 11/21] configs/friendlyarm_nanopi_m4: " Thomas Petazzoni via buildroot
` (11 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:19 UTC (permalink / raw)
To: buildroot; +Cc: Filip Skoneczny, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499051
Cc: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
board/friendlyarm/nanopi-m1-plus/boot.cmd | 8 ----
board/friendlyarm/nanopi-m1-plus/genimage.cfg | 36 ---------------
board/friendlyarm/nanopi-m1-plus/readme.txt | 29 ------------
configs/friendlyarm_nanopi_m1_plus_defconfig | 45 -------------------
4 files changed, 118 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-m1-plus/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-m1-plus/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-m1-plus/readme.txt
delete mode 100644 configs/friendlyarm_nanopi_m1_plus_defconfig
diff --git a/board/friendlyarm/nanopi-m1-plus/boot.cmd b/board/friendlyarm/nanopi-m1-plus/boot.cmd
deleted file mode 100644
index 35a1d65d3d..0000000000
--- a/board/friendlyarm/nanopi-m1-plus/boot.cmd
+++ /dev/null
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-m1-plus.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-m1-plus/genimage.cfg b/board/friendlyarm/nanopi-m1-plus/genimage.cfg
deleted file mode 100644
index 5257cf89c7..0000000000
--- a/board/friendlyarm/nanopi-m1-plus/genimage.cfg
+++ /dev/null
@@ -1,36 +0,0 @@
-# Minimal SD card image for the NanoPi M1 Plus
-#
-image boot.vfat {
- vfat {
- files = {
- "zImage",
- "sun8i-h3-nanopi-m1-plus.dtb",
- "boot.scr"
- }
- }
-
- size = 10M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot-sunxi-with-spl.bin"
- offset = 8K
- size = 1016K # 1MB - 8KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/friendlyarm/nanopi-m1-plus/readme.txt b/board/friendlyarm/nanopi-m1-plus/readme.txt
deleted file mode 100644
index 0327dec80e..0000000000
--- a/board/friendlyarm/nanopi-m1-plus/readme.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-NanoPi M1 Plus
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi M1 Plus. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
- $ make friendlyarm_nanopi_m1_plus_defconfig
-
-Compile everything and build the SD card image:
-
- $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
diff --git a/configs/friendlyarm_nanopi_m1_plus_defconfig b/configs/friendlyarm_nanopi_m1_plus_defconfig
deleted file mode 100644
index 06adc54b15..0000000000
--- a/configs/friendlyarm_nanopi_m1_plus_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System configuration
-BR2_TARGET_GENERIC_HOSTNAME="nanopi-m1-plus"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi M1 Plus"
-
-# Bootloaders
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_m1_plus"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-m1-plus/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-m1-plus"
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-m1-plus/genimage.cfg"
-# BR2_TARGET_ROOTFS_TAR is not set
-
-# Additional tools
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 11/21] configs/friendlyarm_nanopi_m4: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (9 preceding siblings ...)
2022-11-01 22:19 ` [Buildroot] [PATCH 10/21] " Thomas Petazzoni via buildroot
@ 2022-11-01 22:19 ` Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 12/21] configs/friendlyarm_nanopi_neo2: " Thomas Petazzoni via buildroot
` (10 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:19 UTC (permalink / raw)
To: buildroot; +Cc: Thomas Petazzoni, Suniel Mahesh
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499052
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 1 -
board/friendlyarm/nanopi-m4/extlinux.conf | 4 --
board/friendlyarm/nanopi-m4/genimage.cfg | 39 -----------------
board/friendlyarm/nanopi-m4/post-build.sh | 5 ---
board/friendlyarm/nanopi-m4/readme.txt | 45 -------------------
configs/friendlyarm_nanopi_m4_defconfig | 53 -----------------------
6 files changed, 147 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
delete mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
delete mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
delete mode 100644 board/friendlyarm/nanopi-m4/readme.txt
delete mode 100644 configs/friendlyarm_nanopi_m4_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 479189c166..889ce3a02c 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2752,7 +2752,6 @@ F: board/pine64/rockpro64
F: board/radxa/rockpi-4
F: board/radxa/rockpi-n8
F: board/radxa/rockpi-n10
-F: configs/friendlyarm_nanopi_m4_defconfig
F: configs/orangepi_rk3399_defconfig
F: configs/roc_pc_rk3399_defconfig
F: configs/rock_pi_4_defconfig
diff --git a/board/friendlyarm/nanopi-m4/extlinux.conf b/board/friendlyarm/nanopi-m4/extlinux.conf
deleted file mode 100644
index fb24f09eb1..0000000000
--- a/board/friendlyarm/nanopi-m4/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label RK3399_NANOPI_M4 linux
- kernel /Image
- devicetree /rk3399-nanopi-m4.dtb
- append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
diff --git a/board/friendlyarm/nanopi-m4/genimage.cfg b/board/friendlyarm/nanopi-m4/genimage.cfg
deleted file mode 100644
index 3e6818eab9..0000000000
--- a/board/friendlyarm/nanopi-m4/genimage.cfg
+++ /dev/null
@@ -1,39 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "rk3399-nanopi-m4.dtb",
- "extlinux"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- partition-table-type = "gpt"
- }
-
- partition loader1 {
- image = "idbloader.img"
- offset = 32K
- }
-
- partition loader2 {
- image = "u-boot.itb"
- offset = 8M
- }
-
- partition boot {
- partition-type-uuid = F
- bootable = "true"
- image = "boot.vfat"
- offset = 16M
- }
-
- partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
- image = "rootfs.ext4"
- }
-}
diff --git a/board/friendlyarm/nanopi-m4/post-build.sh b/board/friendlyarm/nanopi-m4/post-build.sh
deleted file mode 100755
index ba29375c05..0000000000
--- a/board/friendlyarm/nanopi-m4/post-build.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-m4/readme.txt b/board/friendlyarm/nanopi-m4/readme.txt
deleted file mode 100644
index 0553bf8377..0000000000
--- a/board/friendlyarm/nanopi-m4/readme.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-FriendlyARM NANOPI-M4
-=====================
-
-Build:
-
- $ make friendlyarm_nanopi_m4_defconfig
- $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── boot.vfat
-├── extlinux
-├── idbloader.img
-├── Image
-├── rk3399-nanopi-m4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
---------------
-
-Baudrate for this board is 1500000
-
-Login:
-------
-Enter 'root' as login user, and the prompt is ready.
-
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/nanopi_m4.html
diff --git a/configs/friendlyarm_nanopi_m4_defconfig b/configs/friendlyarm_nanopi_m4_defconfig
deleted file mode 100644
index 9c3f58f200..0000000000
--- a/configs/friendlyarm_nanopi_m4_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# Architecture
-BR2_aarch64=y
-BR2_cortex_a72_a53=y
-
-# Linux headers same as kernel, a 5.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-m4-rk3399"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.2"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-m4"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="nanopi-m4"
-BR2_TARGET_GENERIC_ISSUE="Welcome to NANOPI-M4"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-m4/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-m4/post-build.sh"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 12/21] configs/friendlyarm_nanopi_neo2: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (10 preceding siblings ...)
2022-11-01 22:19 ` [Buildroot] [PATCH 11/21] configs/friendlyarm_nanopi_m4: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:19 ` Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 13/21] configs/friendlyarm_nanopi_neo4: " Thomas Petazzoni via buildroot
` (9 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:19 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499053
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/friendlyarm/nanopi-neo2/boot.cmd | 6 ---
board/friendlyarm/nanopi-neo2/genimage.cfg | 40 -----------------
board/friendlyarm/nanopi-neo2/readme.txt | 37 ----------------
configs/friendlyarm_nanopi_neo2_defconfig | 50 ----------------------
5 files changed, 135 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-neo2/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
delete mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 889ce3a02c..a4bfad30ce 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1304,7 +1304,6 @@ F: board/amarula/
F: board/asus/
F: board/bananapi/
F: board/engicam/
-F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a33_olinuxino/
F: board/olimex/a64-olinuxino/
F: board/orangepi/orangepi-lite2/
@@ -1321,7 +1320,6 @@ F: configs/engicam_imx6qdl_icore_qt5_defconfig
F: configs/engicam_imx6qdl_icore_rqs_defconfig
F: configs/engicam_imx6ul_geam_defconfig
F: configs/engicam_imx6ul_isiot_defconfig
-F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a33_olinuxino_defconfig
F: configs/olimex_a64_olinuxino_defconfig
F: configs/orangepi_lite2_defconfig
diff --git a/board/friendlyarm/nanopi-neo2/boot.cmd b/board/friendlyarm/nanopi-neo2/boot.cmd
deleted file mode 100644
index 9a39f4afc9..0000000000
--- a/board/friendlyarm/nanopi-neo2/boot.cmd
+++ /dev/null
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-h5-nanopi-neo2.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-neo2/genimage.cfg b/board/friendlyarm/nanopi-neo2/genimage.cfg
deleted file mode 100644
index 3163a06592..0000000000
--- a/board/friendlyarm/nanopi-neo2/genimage.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-h5-nanopi-neo2.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/friendlyarm/nanopi-neo2/readme.txt b/board/friendlyarm/nanopi-neo2/readme.txt
deleted file mode 100644
index 0f445e2bea..0000000000
--- a/board/friendlyarm/nanopi-neo2/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Nanopi NEO2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Nanopi NEO2 link:
-http://nanopi.io/nanopi-neo2.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/FriendlyARM+NanoPi+NEO2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make friendlyarm_nanopi_neo2_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Nanopi NEO2 and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/friendlyarm_nanopi_neo2_defconfig b/configs/friendlyarm_nanopi_neo2_defconfig
deleted file mode 100644
index 9262737b88..0000000000
--- a/configs/friendlyarm_nanopi_neo2_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-R2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo2"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-neo2/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo2"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi NEO2"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo2/genimage.cfg"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 13/21] configs/friendlyarm_nanopi_neo4: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (11 preceding siblings ...)
2022-11-01 22:19 ` [Buildroot] [PATCH 12/21] configs/friendlyarm_nanopi_neo2: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:19 ` Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 14/21] configs/friendlyarm_nanopi_neo_plus2: " Thomas Petazzoni via buildroot
` (8 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:19 UTC (permalink / raw)
To: buildroot; +Cc: Marek Belisko, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499054
Cc: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/friendlyarm/nanopi-neo4/extlinux.conf | 4 --
board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ---------
board/friendlyarm/nanopi-neo4/post-build.sh | 5 --
board/friendlyarm/nanopi-neo4/readme.txt | 53 --------------------
configs/friendlyarm_nanopi_neo4_defconfig | 55 ---------------------
6 files changed, 141 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
delete mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
delete mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
delete mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
delete mode 100644 configs/friendlyarm_nanopi_neo4_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index a4bfad30ce..18355a444e 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1899,8 +1899,6 @@ F: utils/config
F: utils/diffconfig
N: Marek Belisko <marek.belisko@open-nandra.com>
-F: board/friendlyarm/nanopi-neo4/
-F: configs/friendlyarm_nanopi_neo4_defconfig
F: package/libatasmart/
F: package/polkit/
F: package/sg3_utils/
diff --git a/board/friendlyarm/nanopi-neo4/extlinux.conf b/board/friendlyarm/nanopi-neo4/extlinux.conf
deleted file mode 100644
index 91eef67fb9..0000000000
--- a/board/friendlyarm/nanopi-neo4/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label NanoPi Neo4 linux
- kernel /boot/Image
- devicetree /boot/rk3399-nanopi-neo4.dtb
- append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
diff --git a/board/friendlyarm/nanopi-neo4/genimage.cfg b/board/friendlyarm/nanopi-neo4/genimage.cfg
deleted file mode 100644
index 966c869273..0000000000
--- a/board/friendlyarm/nanopi-neo4/genimage.cfg
+++ /dev/null
@@ -1,22 +0,0 @@
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot-tpl-spl-dtb {
- in-partition-table = "no"
- image = "idbloader.img"
- offset = 32K
- }
-
- partition u-boot-dtb {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 8M
- size = 30M
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/friendlyarm/nanopi-neo4/post-build.sh b/board/friendlyarm/nanopi-neo4/post-build.sh
deleted file mode 100755
index 1f5ff6a611..0000000000
--- a/board/friendlyarm/nanopi-neo4/post-build.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-neo4/readme.txt b/board/friendlyarm/nanopi-neo4/readme.txt
deleted file mode 100644
index 7c04a52806..0000000000
--- a/board/friendlyarm/nanopi-neo4/readme.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Intro
-=====
-
-NanoPi Neo4 is a RK3399 SoC based ARM64 board.
-
-
-Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
-Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
-
-Build
-=====
-
-Run NanoPi Neo4 configuration
-
- $ make friendlyarm_nanopi_neo4_defconfig
-
-To build, run make comamnd.
-
- $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.bin
-├── bl31.elf
-├── Image
-├── rk3399-nanopi-neo4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-├── u-boot.itb
-├── u-boot-spl-dtb.bin
-├── u-boot-tpl-dtb.bin
-├── u-boot-tpl-dtb.img
-└── u-boot-tpl-spl-dtb.img
-
-Creating bootable SD card:
-=========================
-
-Simply invoke (as root)
-
- # dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
---------------
-
-Baudrate for this board is 1500000
diff --git a/configs/friendlyarm_nanopi_neo4_defconfig b/configs/friendlyarm_nanopi_neo4_defconfig
deleted file mode 100644
index a11872ef2a..0000000000
--- a/configs/friendlyarm_nanopi_neo4_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# Architecture
-BR2_aarch64=y
-BR2_cortex_a72_a53=y
-
-# Linux headers same as kernel, a 5.4 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-neo4-rk3399"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.18"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-neo4"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="NanoPi Neo4"
-BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi Neo4!"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="70M"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo4/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo4/post-build.sh"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 14/21] configs/friendlyarm_nanopi_neo_plus2: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (12 preceding siblings ...)
2022-11-01 22:19 ` [Buildroot] [PATCH 13/21] configs/friendlyarm_nanopi_neo4: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:19 ` Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 15/21] configs/friendlyarm_nanopi_r1: " Thomas Petazzoni via buildroot
` (7 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:19 UTC (permalink / raw)
To: buildroot; +Cc: Louis Aussedat, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499055
Cc: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
.../nanopi-neo-plus2/extlinux.conf | 4 --
.../friendlyarm/nanopi-neo-plus2/genimage.cfg | 40 ------------
| 10 ---
.../nanopi-neo-plus2/post-build.sh | 4 --
board/friendlyarm/nanopi-neo-plus2/readme.txt | 37 -----------
...3430-sdio.friendlyarm,nanopi-neo-plus2.txt | 53 ----------------
.../friendlyarm_nanopi_neo_plus2_defconfig | 62 -------------------
8 files changed, 212 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/extlinux.conf
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/linux-extras.config
delete mode 100755 board/friendlyarm/nanopi-neo-plus2/post-build.sh
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/readme.txt
delete mode 100644 board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
delete mode 100644 configs/friendlyarm_nanopi_neo_plus2_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 18355a444e..2050268173 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1783,8 +1783,6 @@ F: package/ti-sgx-km/
F: package/ti-sgx-um/
N: Louis Aussedat <aussedat.louis@gmail.com>
-F: board/friendlyarm/nanopi-neo-plus2/
-F: configs/friendlyarm_nanopi_neo_plus2_defconfig
F: package/mfoc
F: package/libpam-nfc
F: package/python-dnspython/
diff --git a/board/friendlyarm/nanopi-neo-plus2/extlinux.conf b/board/friendlyarm/nanopi-neo-plus2/extlinux.conf
deleted file mode 100644
index fcb6f632c1..0000000000
--- a/board/friendlyarm/nanopi-neo-plus2/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label linux
- kernel /Image
- devicetree /sun50i-h5-nanopi-neo-plus2.dtb
- append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
diff --git a/board/friendlyarm/nanopi-neo-plus2/genimage.cfg b/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
deleted file mode 100644
index 9000201399..0000000000
--- a/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-h5-nanopi-neo-plus2.dtb",
- "extlinux"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/friendlyarm/nanopi-neo-plus2/linux-extras.config b/board/friendlyarm/nanopi-neo-plus2/linux-extras.config
deleted file mode 100644
index 52b4b4b29e..0000000000
--- a/board/friendlyarm/nanopi-neo-plus2/linux-extras.config
+++ /dev/null
@@ -1,10 +0,0 @@
-# wireless core
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_CFG80211_WEXT=y
-
-# wireless drivers
-CONFIG_WLAN=y
-CONFIG_WLAN_VENDOR_BROADCOM=y
-CONFIG_BRCMFMAC=m
diff --git a/board/friendlyarm/nanopi-neo-plus2/post-build.sh b/board/friendlyarm/nanopi-neo-plus2/post-build.sh
deleted file mode 100755
index ec20fca7d9..0000000000
--- a/board/friendlyarm/nanopi-neo-plus2/post-build.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/friendlyarm/nanopi-neo-plus2/readme.txt b/board/friendlyarm/nanopi-neo-plus2/readme.txt
deleted file mode 100644
index ae59952029..0000000000
--- a/board/friendlyarm/nanopi-neo-plus2/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Nanopi NEO Plus2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Nanopi NEO2 link:
-http://nanopi.io/nanopi-neo-plus2.html
-
-Wiki link:
-http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make friendlyarm_nanopi_neo_plus2_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt b/board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
deleted file mode 100644
index 740d172eb5..0000000000
--- a/board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-#AP6212_NVRAM_V1.0.1_20160606
-# 2.4 GHz, 20 MHz BW mode
-# The following parameter values are just placeholders, need to be updated.
-manfid=0x2d0
-prodid=0x0726
-vendid=0x14e4
-devid=0x43e2
-boardtype=0x0726
-boardrev=0x1101
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=11
-boardflags=0x00404201
-xtalfreq=26000
-nocrc=1
-ag0=255
-aa2g=1
-ccode=ALL
-
-pa0itssit=0x20
-extpagain2g=0
-
-#PA parameters for 2.4GHz, measured at CHIP OUTPUT
-pa2ga0=-168,7161,-820
-AvVmid_c0=0x0,0xc8
-cckpwroffset0=5
-
-# PPR params
-maxp2ga0=90
-txpwrbckof=6
-cckbw202gpo=0x5555
-legofdmbw202gpo=0x77777777
-mcsbw202gpo=0xaaaaaaaa
-
-# OFDM IIR :
-ofdmdigfilttype=7
-# PAPD mode:
-papdmode=2
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-
-#OOB parameters
-hostwake=0x40
-hostrdy=0x41
-usbrdy=0x03
-usbrdydelay=100
-deadman_to=0xffffffff
-# muxenab: 0x1 for UART enable, 0x10 for Host awake
-muxenab=0x10
-# CLDO PWM voltage settings - 0x4 - 1.1 volt
-#cldo_pwm=0x4
-glitch_based_crsmin=1
diff --git a/configs/friendlyarm_nanopi_neo_plus2_defconfig b/configs/friendlyarm_nanopi_neo_plus2_defconfig
deleted file mode 100644
index 461e468cb6..0000000000
--- a/configs/friendlyarm_nanopi_neo_plus2_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_ROOTFS_OVERLAY="board/friendlyarm/nanopi-neo-plus2/rootfs_overlay"
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-R2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.10"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo_plus2"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.4"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo-plus2"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-neo-plus2/linux-extras.config"
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM Nanopi NEO Plus2"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo-plus2/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo-plus2/post-build.sh"
-
-# wireless firmware
-BR2_PACKAGE_LINUX_FIRMWARE=y
-BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
-
-# wireless tools
-BR2_PACKAGE_IW=y
-BR2_PACKAGE_WIRELESS_TOOLS=y
-BR2_PACKAGE_WIRELESS_TOOLS_LIB=y
-BR2_PACKAGE_WPA_SUPPLICANT=y
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y
-BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 15/21] configs/friendlyarm_nanopi_r1: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (13 preceding siblings ...)
2022-11-01 22:19 ` [Buildroot] [PATCH 14/21] configs/friendlyarm_nanopi_neo_plus2: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:20 ` Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 16/21] configs/orangepi_pc2: " Thomas Petazzoni via buildroot
` (6 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:20 UTC (permalink / raw)
To: buildroot; +Cc: Davide Viti, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499056
Cc: Davide Viti <zinosat@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/friendlyarm/nanopi-r1/boot.cmd | 8 -
board/friendlyarm/nanopi-r1/genimage.cfg | 37 ----
| 2 -
.../nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts | 170 ------------------
board/friendlyarm/nanopi-r1/readme.txt | 29 ---
.../nanopi-r1/uboot/nanopi_r1_defconfig | 22 ---
.../nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts | 102 -----------
configs/friendlyarm_nanopi_r1_defconfig | 49 -----
9 files changed, 421 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-r1/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-r1/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-r1/kernel/linux-extras.config
delete mode 100644 board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
delete mode 100644 board/friendlyarm/nanopi-r1/readme.txt
delete mode 100644 board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
delete mode 100644 board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
delete mode 100644 configs/friendlyarm_nanopi_r1_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 2050268173..a24fc168bc 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -722,8 +722,6 @@ N: David Pierret <david.pierret@smile.fr>
F: package/bat/
N: Davide Viti <zinosat@gmail.com>
-F: board/friendlyarm/nanopi-r1/
-F: configs/friendlyarm_nanopi_r1_defconfig
F: package/flann/
F: package/python-paho-mqtt/
F: package/qhull/
diff --git a/board/friendlyarm/nanopi-r1/boot.cmd b/board/friendlyarm/nanopi-r1/boot.cmd
deleted file mode 100644
index 9f0cdbfe51..0000000000
--- a/board/friendlyarm/nanopi-r1/boot.cmd
+++ /dev/null
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-r1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-r1/genimage.cfg b/board/friendlyarm/nanopi-r1/genimage.cfg
deleted file mode 100644
index a180311cae..0000000000
--- a/board/friendlyarm/nanopi-r1/genimage.cfg
+++ /dev/null
@@ -1,37 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
- vfat {
- files = {
- "zImage",
- "sun8i-h3-nanopi-r1.dtb",
- "boot.scr"
- }
- }
-
- size = 10M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot-sunxi-with-spl.bin"
- offset = 8K
- size = 1016K # 1MB - 8KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- size = 512M
- }
-}
diff --git a/board/friendlyarm/nanopi-r1/kernel/linux-extras.config b/board/friendlyarm/nanopi-r1/kernel/linux-extras.config
deleted file mode 100644
index 206b3810a7..0000000000
--- a/board/friendlyarm/nanopi-r1/kernel/linux-extras.config
+++ /dev/null
@@ -1,2 +0,0 @@
-# USB ethernet
-CONFIG_USB_RTL8152=y
diff --git a/board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts b/board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
deleted file mode 100644
index ca15a57bee..0000000000
--- a/board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-h3-nanopi.dtsi"
-
-/ {
- model = "FriendlyElec NanoPi-R1";
- compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-
- aliases {
- serial1 = &uart3;
- ethernet0 = &emac;
- ethernet1 = &emac;
- ethernet2 = &sdio_wifi;
- };
-
- wifi_pwrseq: wifi_pwrseq {
- compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- };
-
- reg_gmac_3v3: gmac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
- };
-
- leds {
- /delete-node/ status;
- /delete-node/ pwr;
- led1 {
- label = "LED1";
- gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
-
- led2 {
- label = "LED2";
- gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "netdev";
- };
-
- led3 {
- label = "LED3";
- gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "netdev";
- };
- };
-
- r_gpio_keys {
- compatible = "gpio-keys";
- input-name = "k1";
- pinctrl-names = "default";
- pinctrl-0 = <&sw_r_npi>;
-
- /delete-node/ k1;
- reset {
- label = "reset";
- linux,code = <BTN_1>;
- gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
-
- status = "okay";
-};
-
-&external_mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <7>;
- };
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc3v3>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- sdio_wifi: sdio_wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&pio>;
- interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
- interrupt-names = "host-wake";
- };
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc3v3>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
diff --git a/board/friendlyarm/nanopi-r1/readme.txt b/board/friendlyarm/nanopi-r1/readme.txt
deleted file mode 100644
index fa3114fc83..0000000000
--- a/board/friendlyarm/nanopi-r1/readme.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-NanoPi R1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi R1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
- $ make friendlyarm_nanopi_r1_defconfig
-
-Compile everything and build the SD card image:
-
- $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
diff --git a/board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig b/board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
deleted file mode 100644
index e028b41a46..0000000000
--- a/board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_SPL=y
-CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=408
-CONFIG_DRAM_ZQ=3881979
-CONFIG_DRAM_ODT_EN=y
-CONFIG_MACPWR="PD6"
-# CONFIG_VIDEO_DE2 is not set
-CONFIG_NR_DRAM_BANKS=1
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CLK_FREQ=480000000
-# CONFIG_CMD_FLASH is not set
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-CONFIG_SUN8I_EMAC=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_MMC_SUNXI_SLOT_EXTRA=2
diff --git a/board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts b/board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
deleted file mode 100644
index 9c3c574e0f..0000000000
--- a/board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-h3-nanopi.dtsi"
-
-/ {
- model = "FriendlyARM NanoPi R1";
- compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-
- reg_gmac_3v3: gmac-3v3 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
- };
-
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&pio {
- gmac_power_pin_nanopi: gmac_power_pin@0 {
- pins = "PD6";
- function = "gpio_out";
- };
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <8>;
- non-removable;
- cap-mmc-hw-reset;
- status = "okay";
-};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
-
- status = "okay";
-};
-
-&external_mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <7>;
- };
-};
diff --git a/configs/friendlyarm_nanopi_r1_defconfig b/configs/friendlyarm_nanopi_r1_defconfig
deleted file mode 100644
index 8b03f6dd00..0000000000
--- a/configs/friendlyarm_nanopi_r1_defconfig
+++ /dev/null
@@ -1,49 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System configuration
-BR2_TARGET_GENERIC_HOSTNAME="nanopi-r1"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi R1"
-
-# Bootloaders
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_CUSTOM_DTS_PATH="board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts"
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE="board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-r1/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/friendlyarm/nanopi-r1/kernel/linux-extras.config"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts"
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-r1"
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r1/genimage.cfg"
-# BR2_TARGET_ROOTFS_TAR is not set
-
-# Additional tools
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 16/21] configs/orangepi_pc2: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (14 preceding siblings ...)
2022-11-01 22:20 ` [Buildroot] [PATCH 15/21] configs/friendlyarm_nanopi_r1: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:20 ` Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 17/21] configs/orangepi_plus: " Thomas Petazzoni via buildroot
` (5 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:20 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499136
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/orangepi/orangepi-pc2/boot.cmd | 6 ---
board/orangepi/orangepi-pc2/genimage.cfg | 40 -------------------
board/orangepi/orangepi-pc2/readme.txt | 37 ------------------
configs/orangepi_pc2_defconfig | 50 ------------------------
5 files changed, 135 deletions(-)
delete mode 100644 board/orangepi/orangepi-pc2/boot.cmd
delete mode 100644 board/orangepi/orangepi-pc2/genimage.cfg
delete mode 100644 board/orangepi/orangepi-pc2/readme.txt
delete mode 100644 configs/orangepi_pc2_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index a24fc168bc..d040389eea 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1306,7 +1306,6 @@ F: board/olimex/a33_olinuxino/
F: board/olimex/a64-olinuxino/
F: board/orangepi/orangepi-lite2/
F: board/orangepi/orangepi-one-plus
-F: board/orangepi/orangepi-pc2/
F: board/orangepi/orangepi-prime/
F: board/orangepi/orangepi-win/
F: board/orangepi/orangepi-zero-plus2/
@@ -1322,7 +1321,6 @@ F: configs/olimex_a33_olinuxino_defconfig
F: configs/olimex_a64_olinuxino_defconfig
F: configs/orangepi_lite2_defconfig
F: configs/orangepi_one_plus_defconfig
-F: configs/orangepi_pc2_defconfig
F: configs/orangepi_prime_defconfig
F: configs/orangepi_win_defconfig
F: configs/orangepi_zero_plus2_defconfig
diff --git a/board/orangepi/orangepi-pc2/boot.cmd b/board/orangepi/orangepi-pc2/boot.cmd
deleted file mode 100644
index 4d4fc7bf67..0000000000
--- a/board/orangepi/orangepi-pc2/boot.cmd
+++ /dev/null
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-pc2.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/orangepi/orangepi-pc2/genimage.cfg b/board/orangepi/orangepi-pc2/genimage.cfg
deleted file mode 100644
index cc8695c9f1..0000000000
--- a/board/orangepi/orangepi-pc2/genimage.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-h5-orangepi-pc2.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/orangepi/orangepi-pc2/readme.txt b/board/orangepi/orangepi-pc2/readme.txt
deleted file mode 100644
index 1200481952..0000000000
--- a/board/orangepi/orangepi-pc2/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi PC2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi PC2 link:
-http://www.orangepi.org/orangepipc2/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+PC2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make orangepi_pc2_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Orangepi PC2 and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
deleted file mode 100644
index c7e17c8eb1..0000000000
--- a/configs/orangepi_pc2_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_pc2"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-pc2/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-pc2"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi PC2"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-pc2/genimage.cfg"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 17/21] configs/orangepi_plus: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (15 preceding siblings ...)
2022-11-01 22:20 ` [Buildroot] [PATCH 16/21] configs/orangepi_pc2: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:20 ` Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 18/21] configs/orangepi_prime: " Thomas Petazzoni via buildroot
` (4 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:20 UTC (permalink / raw)
To: buildroot; +Cc: Shyam Saini, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499140
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
board/orangepi/orangepi-plus/boot.cmd | 8 -----
board/orangepi/orangepi-plus/genimage.cfg | 36 -------------------
board/orangepi/orangepi-plus/readme.txt | 29 ---------------
configs/orangepi_plus_defconfig | 44 -----------------------
4 files changed, 117 deletions(-)
delete mode 100644 board/orangepi/orangepi-plus/boot.cmd
delete mode 100644 board/orangepi/orangepi-plus/genimage.cfg
delete mode 100644 board/orangepi/orangepi-plus/readme.txt
delete mode 100644 configs/orangepi_plus_defconfig
diff --git a/board/orangepi/orangepi-plus/boot.cmd b/board/orangepi/orangepi-plus/boot.cmd
deleted file mode 100644
index 1a378cb918..0000000000
--- a/board/orangepi/orangepi-plus/boot.cmd
+++ /dev/null
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-plus.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/orangepi/orangepi-plus/genimage.cfg b/board/orangepi/orangepi-plus/genimage.cfg
deleted file mode 100644
index 1ca30258dc..0000000000
--- a/board/orangepi/orangepi-plus/genimage.cfg
+++ /dev/null
@@ -1,36 +0,0 @@
-# Minimal SD card image for the OrangePi Plus\Plus2
-#
-image boot.vfat {
- vfat {
- files = {
- "zImage",
- "sun8i-h3-orangepi-plus.dtb",
- "boot.scr"
- }
- }
-
- size = 10M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot-sunxi-with-spl.bin"
- offset = 8K
- size = 1016K # 1MB - 8KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/orangepi/orangepi-plus/readme.txt b/board/orangepi/orangepi-plus/readme.txt
deleted file mode 100644
index 7f871bcfab..0000000000
--- a/board/orangepi/orangepi-plus/readme.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-OrangePi Plus/Plus2
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the OrangePi Plus/Plus2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
- $ make orangepi_plus_defconfig
-
-Compile everything and build the SD card image:
-
- $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
diff --git a/configs/orangepi_plus_defconfig b/configs/orangepi_plus_defconfig
deleted file mode 100644
index 11d7486486..0000000000
--- a/configs/orangepi_plus_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System configuration
-BR2_TARGET_GENERIC_HOSTNAME="OrangePi_Plus"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi Plus"
-
-# Bootloaders
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_plus"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-plus/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-orangepi-plus"
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-plus/genimage.cfg"
-
-# Additional tools
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 18/21] configs/orangepi_prime: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (16 preceding siblings ...)
2022-11-01 22:20 ` [Buildroot] [PATCH 17/21] configs/orangepi_plus: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:20 ` Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 19/21] configs/orangepi_rk3399: " Thomas Petazzoni via buildroot
` (3 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:20 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499141
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/orangepi/orangepi-prime/boot.cmd | 6 ---
board/orangepi/orangepi-prime/genimage.cfg | 40 -----------------
board/orangepi/orangepi-prime/readme.txt | 37 ----------------
configs/orangepi_prime_defconfig | 50 ----------------------
5 files changed, 135 deletions(-)
delete mode 100644 board/orangepi/orangepi-prime/boot.cmd
delete mode 100644 board/orangepi/orangepi-prime/genimage.cfg
delete mode 100644 board/orangepi/orangepi-prime/readme.txt
delete mode 100644 configs/orangepi_prime_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index d040389eea..63bb700281 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1306,7 +1306,6 @@ F: board/olimex/a33_olinuxino/
F: board/olimex/a64-olinuxino/
F: board/orangepi/orangepi-lite2/
F: board/orangepi/orangepi-one-plus
-F: board/orangepi/orangepi-prime/
F: board/orangepi/orangepi-win/
F: board/orangepi/orangepi-zero-plus2/
F: board/pine64/
@@ -1321,7 +1320,6 @@ F: configs/olimex_a33_olinuxino_defconfig
F: configs/olimex_a64_olinuxino_defconfig
F: configs/orangepi_lite2_defconfig
F: configs/orangepi_one_plus_defconfig
-F: configs/orangepi_prime_defconfig
F: configs/orangepi_win_defconfig
F: configs/orangepi_zero_plus2_defconfig
F: configs/pine64_defconfig
diff --git a/board/orangepi/orangepi-prime/boot.cmd b/board/orangepi/orangepi-prime/boot.cmd
deleted file mode 100644
index 34887880d8..0000000000
--- a/board/orangepi/orangepi-prime/boot.cmd
+++ /dev/null
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-prime.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/orangepi/orangepi-prime/genimage.cfg b/board/orangepi/orangepi-prime/genimage.cfg
deleted file mode 100644
index dde9a6485f..0000000000
--- a/board/orangepi/orangepi-prime/genimage.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-h5-orangepi-prime.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/orangepi/orangepi-prime/readme.txt b/board/orangepi/orangepi-prime/readme.txt
deleted file mode 100644
index 5811884d4d..0000000000
--- a/board/orangepi/orangepi-prime/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi Prime. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi Prime link:
-http://www.orangepi.org/OrangePiPrime/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Prime
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make orangepi_prime_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Orangepi Prime and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig
deleted file mode 100644
index f8f958c67b..0000000000
--- a/configs/orangepi_prime_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_prime"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-prime/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Prime"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-prime/genimage.cfg"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 19/21] configs/orangepi_rk3399: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (17 preceding siblings ...)
2022-11-01 22:20 ` [Buildroot] [PATCH 18/21] configs/orangepi_prime: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:20 ` Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 20/21] configs/orangepi_win: " Thomas Petazzoni via buildroot
` (2 subsequent siblings)
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:20 UTC (permalink / raw)
To: buildroot; +Cc: Thomas Petazzoni, Suniel Mahesh
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499144
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/orangepi/orangepi-rk3399/extlinux.conf | 4 --
board/orangepi/orangepi-rk3399/genimage.cfg | 38 -------------
board/orangepi/orangepi-rk3399/post-build.sh | 5 --
board/orangepi/orangepi-rk3399/readme.txt | 56 --------------------
configs/orangepi_rk3399_defconfig | 53 ------------------
6 files changed, 158 deletions(-)
delete mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf
delete mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg
delete mode 100755 board/orangepi/orangepi-rk3399/post-build.sh
delete mode 100644 board/orangepi/orangepi-rk3399/readme.txt
delete mode 100644 configs/orangepi_rk3399_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 63bb700281..9ee13d5258 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2735,12 +2735,10 @@ F: package/powertop/
N: Suniel Mahesh <sunil@amarulasolutions.com>
F: board/firefly/
F: board/friendlyarm/nanopi-m4
-F: board/orangepi/orangepi-rk3399
F: board/pine64/rockpro64
F: board/radxa/rockpi-4
F: board/radxa/rockpi-n8
F: board/radxa/rockpi-n10
-F: configs/orangepi_rk3399_defconfig
F: configs/roc_pc_rk3399_defconfig
F: configs/rock_pi_4_defconfig
F: configs/rock_pi_n8_defconfig
diff --git a/board/orangepi/orangepi-rk3399/extlinux.conf b/board/orangepi/orangepi-rk3399/extlinux.conf
deleted file mode 100644
index 157c6a715e..0000000000
--- a/board/orangepi/orangepi-rk3399/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label RK3399_ORANGEPI linux
- kernel /Image
- devicetree /rk3399-orangepi.dtb
- append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
diff --git a/board/orangepi/orangepi-rk3399/genimage.cfg b/board/orangepi/orangepi-rk3399/genimage.cfg
deleted file mode 100644
index a02166172f..0000000000
--- a/board/orangepi/orangepi-rk3399/genimage.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "rk3399-orangepi.dtb",
- "extlinux"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- partition-table-type = "gpt"
- }
-
- partition loader1 {
- image = "idbloader.img"
- offset = 32K
- }
-
- partition loader2 {
- image = "u-boot.itb"
- offset = 8M
- }
-
- partition boot {
- partition-type-uuid = F
- bootable = "true"
- image = "boot.vfat"
- offset = 16M
- }
-
- partition rootfs {
- image = "rootfs.ext4"
- }
-}
diff --git a/board/orangepi/orangepi-rk3399/post-build.sh b/board/orangepi/orangepi-rk3399/post-build.sh
deleted file mode 100755
index ba29375c05..0000000000
--- a/board/orangepi/orangepi-rk3399/post-build.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/orangepi/orangepi-rk3399/readme.txt b/board/orangepi/orangepi-rk3399/readme.txt
deleted file mode 100644
index 197e1fb448..0000000000
--- a/board/orangepi/orangepi-rk3399/readme.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Orangepi Rk3399
-================
-http://www.orangepi.org/Orange%20Pi%20RK3399/
-
-Build:
-======
- $ make orangepi_rk3399_defconfig
- $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── boot.vfat
-├── extlinux
-├── idbloader.img
-├── Image
-├── rk3399-orangepi.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device.
-
-Booting:
-========
-Orangepi-RK3399 by default boots from emmc. For SD card boot to
-happen, emmc should be empty. If emmc happens to have any bootable
-image then erase emmc so that bootrom will look for a proper image in SD.
-
-emmc can be erased once after booted into linux as shown in below link.
-
-https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html
-
-Serial console:
----------------
-
-Baudrate for this board is 1500000.
-
-Login:
-------
-Enter 'root' as login user, and the prompt is ready.
-
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/orangepi.html
diff --git a/configs/orangepi_rk3399_defconfig b/configs/orangepi_rk3399_defconfig
deleted file mode 100644
index bcce35febd..0000000000
--- a/configs/orangepi_rk3399_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-# Architecture
-BR2_aarch64=y
-BR2_cortex_a72_a53=y
-
-# Linux headers same as kernel, a 5.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi-rk3399"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.2"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-orangepi"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="orangepi-rk3399"
-BR2_TARGET_GENERIC_ISSUE="Welcome to ORANGEPI-RK3399"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-rk3399/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/orangepi-rk3399/post-build.sh"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 20/21] configs/orangepi_win: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (18 preceding siblings ...)
2022-11-01 22:20 ` [Buildroot] [PATCH 19/21] configs/orangepi_rk3399: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:20 ` Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 21/21] configs/pine64: " Thomas Petazzoni via buildroot
2022-11-07 21:20 ` [Buildroot] [PATCH 00/21] First batch of defconfig removals Yann E. MORIN
21 siblings, 0 replies; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:20 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499145
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 -
board/orangepi/orangepi-win/boot.cmd | 6 ---
board/orangepi/orangepi-win/genimage.cfg | 40 --------------------
board/orangepi/orangepi-win/readme.txt | 37 ------------------
configs/orangepi_win_defconfig | 48 ------------------------
5 files changed, 133 deletions(-)
delete mode 100644 board/orangepi/orangepi-win/boot.cmd
delete mode 100644 board/orangepi/orangepi-win/genimage.cfg
delete mode 100644 board/orangepi/orangepi-win/readme.txt
delete mode 100644 configs/orangepi_win_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 9ee13d5258..ebfa0a6b30 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1306,7 +1306,6 @@ F: board/olimex/a33_olinuxino/
F: board/olimex/a64-olinuxino/
F: board/orangepi/orangepi-lite2/
F: board/orangepi/orangepi-one-plus
-F: board/orangepi/orangepi-win/
F: board/orangepi/orangepi-zero-plus2/
F: board/pine64/
F: configs/amarula_vyasa_rk3288_defconfig
@@ -1320,7 +1319,6 @@ F: configs/olimex_a33_olinuxino_defconfig
F: configs/olimex_a64_olinuxino_defconfig
F: configs/orangepi_lite2_defconfig
F: configs/orangepi_one_plus_defconfig
-F: configs/orangepi_win_defconfig
F: configs/orangepi_zero_plus2_defconfig
F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
diff --git a/board/orangepi/orangepi-win/boot.cmd b/board/orangepi/orangepi-win/boot.cmd
deleted file mode 100644
index 2ddb769d6d..0000000000
--- a/board/orangepi/orangepi-win/boot.cmd
+++ /dev/null
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-a64-orangepi-win.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/orangepi/orangepi-win/genimage.cfg b/board/orangepi/orangepi-win/genimage.cfg
deleted file mode 100644
index 98fd1a033d..0000000000
--- a/board/orangepi/orangepi-win/genimage.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-a64-orangepi-win.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/orangepi/orangepi-win/readme.txt b/board/orangepi/orangepi-win/readme.txt
deleted file mode 100644
index 93adddd86b..0000000000
--- a/board/orangepi/orangepi-win/readme.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Orangepi Win/Win Plus. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Orangepi Win/Win Plus link:
-http://www.orangepi.org/OrangePiWin_WinPlus/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Win
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make orangepi_win_defconfig
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Orangepi Win/Win Plus and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig
deleted file mode 100644
index 715ff3b711..0000000000
--- a/configs/orangepi_win_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 4.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_win"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-win/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-orangepi-win"
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Win/Win Plus"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-win/genimage.cfg"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [Buildroot] [PATCH 21/21] configs/pine64: remove defconfig
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (19 preceding siblings ...)
2022-11-01 22:20 ` [Buildroot] [PATCH 20/21] configs/orangepi_win: " Thomas Petazzoni via buildroot
@ 2022-11-01 22:20 ` Thomas Petazzoni via buildroot
2022-11-02 11:44 ` Michael Nosthoff via buildroot
2022-11-07 21:20 ` [Buildroot] [PATCH 00/21] First batch of defconfig removals Yann E. MORIN
21 siblings, 1 reply; 24+ messages in thread
From: Thomas Petazzoni via buildroot @ 2022-11-01 22:20 UTC (permalink / raw)
To: buildroot; +Cc: Jagan Teki, Thomas Petazzoni
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499154
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
DEVELOPERS | 2 --
board/pine64/pine64/boot.cmd | 6 ----
board/pine64/pine64/genimage.cfg | 40 -------------------------
board/pine64/pine64/readme.txt | 38 ------------------------
configs/pine64_defconfig | 50 --------------------------------
5 files changed, 136 deletions(-)
delete mode 100644 board/pine64/pine64/boot.cmd
delete mode 100644 board/pine64/pine64/genimage.cfg
delete mode 100644 board/pine64/pine64/readme.txt
delete mode 100644 configs/pine64_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index ebfa0a6b30..9569ee720b 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1307,7 +1307,6 @@ F: board/olimex/a64-olinuxino/
F: board/orangepi/orangepi-lite2/
F: board/orangepi/orangepi-one-plus
F: board/orangepi/orangepi-zero-plus2/
-F: board/pine64/
F: configs/amarula_vyasa_rk3288_defconfig
F: configs/asus_tinker_rk3288_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
@@ -1320,7 +1319,6 @@ F: configs/olimex_a64_olinuxino_defconfig
F: configs/orangepi_lite2_defconfig
F: configs/orangepi_one_plus_defconfig
F: configs/orangepi_zero_plus2_defconfig
-F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
F: package/python-scipy/
F: support/testing/tests/package/sample_python_scipy.py
diff --git a/board/pine64/pine64/boot.cmd b/board/pine64/pine64/boot.cmd
deleted file mode 100644
index 14f561044c..0000000000
--- a/board/pine64/pine64/boot.cmd
+++ /dev/null
@@ -1,6 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r Image
-fatload mmc 0 $fdt_addr_r sun50i-a64-pine64.dtb
-
-booti $kernel_addr_r - $fdt_addr_r
diff --git a/board/pine64/pine64/genimage.cfg b/board/pine64/pine64/genimage.cfg
deleted file mode 100644
index 06b4ed1056..0000000000
--- a/board/pine64/pine64/genimage.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "sun50i-a64-pine64.dtb",
- "boot.scr"
- }
- }
-
- size = 64M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition spl {
- in-partition-table = "no"
- image = "sunxi-spl.bin"
- offset = 8K
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot.itb"
- offset = 40K
- size = 1M # 1MB - 40KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- }
-}
diff --git a/board/pine64/pine64/readme.txt b/board/pine64/pine64/readme.txt
deleted file mode 100644
index 85226fdd17..0000000000
--- a/board/pine64/pine64/readme.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Pine64. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Pine64 link:
-https://www.pine64.org/?page_id=1194
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Pine64
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
- $ make pine64_defconfig
-
- $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
-
-Insert the micro SDcard in your Pine64 and power it up. The console
-is on the serial line, 115200 8N1.
diff --git a/configs/pine64_defconfig b/configs/pine64_defconfig
deleted file mode 100644
index 2bdb6f6ae1..0000000000
--- a/configs/pine64_defconfig
+++ /dev/null
@@ -1,50 +0,0 @@
-BR2_aarch64=y
-BR2_cortex_a53=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pine64_plus"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/pine64/pine64/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-pine64"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_ISSUE="Welcome to PINE64"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/pine64/genimage.cfg"
--
2.37.3
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [Buildroot] [PATCH 21/21] configs/pine64: remove defconfig
2022-11-01 22:20 ` [Buildroot] [PATCH 21/21] configs/pine64: " Thomas Petazzoni via buildroot
@ 2022-11-02 11:44 ` Michael Nosthoff via buildroot
0 siblings, 0 replies; 24+ messages in thread
From: Michael Nosthoff via buildroot @ 2022-11-02 11:44 UTC (permalink / raw)
To: Thomas Petazzoni; +Cc: Jagan Teki, buildroot
Hi,
On Tuesday, November 01, 2022 23:20 CET, Thomas Petazzoni via buildroot <buildroot@buildroot.org> wrote:
> This defconfig has been failing to build for several months, with
> nobody stepping up to fix it. It's time to drop it.
>
> See
> https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
> for a notification on August 6, 2022 about the issues with this
> defconfig.
>
> Fixes:
>
> https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499154
>
I submitted a patch for this as it seems to be having the same issue as the pine64_sopine defconfig before..
Regards,
Michael
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [Buildroot] [PATCH 00/21] First batch of defconfig removals
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
` (20 preceding siblings ...)
2022-11-01 22:20 ` [Buildroot] [PATCH 21/21] configs/pine64: " Thomas Petazzoni via buildroot
@ 2022-11-07 21:20 ` Yann E. MORIN
21 siblings, 0 replies; 24+ messages in thread
From: Yann E. MORIN @ 2022-11-07 21:20 UTC (permalink / raw)
To: Thomas Petazzoni; +Cc: buildroot
Thomas, All,
On 2022-11-01 23:03 +0100, Thomas Petazzoni via buildroot spake thusly:
> This patch series proposes to remove 21 defconfigs which have been
> failing to build for month. All of these defconfigs have already been
> listed in an e-mail sent on August 6, 2022 [0] to the relevant
> defconfig maintainers, and they still haven't been fixed. Close to 3
> months later, it's time to remove them, with the goal of having all
> defconfigs building for the upcoming 2022.11 release.
>
> I'm proposing to give one extra week (until November 7) before
> applying these patches, to see if some of the defconfig maintainers
> send patches to fix the defconfigs they are in charge of, or if
> anybody else steps up.
Exc ept for the pine64 defconfig which got fixed, there's been no other
feedback. The week-long delay has now elapsed, so: applied to master,
thanks.
Regards,
Yann E. MORIN.
> [0] https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
>
> Thanks,
>
> Thomas Petazzoni
>
> Thomas Petazzoni (21):
> configs/amarula_a64_relic: remove defconfig
> configs/arm_juno: remove defconfig
> configs/bananapi_m1: remove defconfig
> configs/bananapi_m1_plus: remove defconfig
> configs/bananapi_m2_plus: remove defconfig
> configs/bananapi_m64: remove defconfig
> configs/friendlyarm_nanopc_t4: remove defconfig
> configs/friendlyarm_nanopi_a64: remove defconfig
> configs/friendlyarm_nanopi_m1: remove defconfig
> configs/friendlyarm_nanopi_m1: remove defconfig
> configs/friendlyarm_nanopi_m4: remove defconfig
> configs/friendlyarm_nanopi_neo2: remove defconfig
> configs/friendlyarm_nanopi_neo4: remove defconfig
> configs/friendlyarm_nanopi_neo_plus2: remove defconfig
> configs/friendlyarm_nanopi_r1: remove defconfig
> configs/orangepi_pc2: remove defconfig
> configs/orangepi_plus: remove defconfig
> configs/orangepi_prime: remove defconfig
> configs/orangepi_rk3399: remove defconfig
> configs/orangepi_win: remove defconfig
> configs/pine64: remove defconfig
>
> DEVELOPERS | 38 ----
> board/amarula/a64-relic/extlinux.conf | 4 -
> board/amarula/a64-relic/genimage.cfg | 11 --
> board/amarula/a64-relic/post-build.sh | 4 -
> board/amarula/a64-relic/readme.txt | 90 ----------
> .../lib/firmware/brcm/brcmfmac4330-sdio.txt | 83 ---------
> board/arm/juno/linux-juno-defconfig | 169 -----------------
> board/arm/juno/readme.txt | 134 --------------
> board/bananapi/bananapi-m1/boot.cmd | 7 -
> board/bananapi/bananapi-m1/genimage.cfg | 34 ----
> board/bananapi/bananapi-m1/readme.txt | 37 ----
> board/bananapi/bananapi-m64/boot.cmd | 6 -
> board/bananapi/bananapi-m64/genimage.cfg | 40 -----
> board/bananapi/bananapi-m64/readme.txt | 37 ----
> board/friendlyarm/nanopc-t4/extlinux.conf | 4 -
> board/friendlyarm/nanopc-t4/genimage.cfg | 39 ----
> board/friendlyarm/nanopc-t4/post-build.sh | 5 -
> board/friendlyarm/nanopc-t4/readme.txt | 45 -----
> board/friendlyarm/nanopi-a64/boot.cmd | 6 -
> board/friendlyarm/nanopi-a64/genimage.cfg | 40 -----
> board/friendlyarm/nanopi-a64/readme.txt | 37 ----
> board/friendlyarm/nanopi-m1-plus/boot.cmd | 8 -
> board/friendlyarm/nanopi-m1-plus/genimage.cfg | 36 ----
> board/friendlyarm/nanopi-m1-plus/readme.txt | 29 ---
> board/friendlyarm/nanopi-m1/boot.cmd | 8 -
> board/friendlyarm/nanopi-m1/genimage.cfg | 37 ----
> board/friendlyarm/nanopi-m1/readme.txt | 29 ---
> board/friendlyarm/nanopi-m4/extlinux.conf | 4 -
> board/friendlyarm/nanopi-m4/genimage.cfg | 39 ----
> board/friendlyarm/nanopi-m4/post-build.sh | 5 -
> board/friendlyarm/nanopi-m4/readme.txt | 45 -----
> .../nanopi-neo-plus2/extlinux.conf | 4 -
> .../friendlyarm/nanopi-neo-plus2/genimage.cfg | 40 -----
> .../nanopi-neo-plus2/linux-extras.config | 10 --
> .../nanopi-neo-plus2/post-build.sh | 4 -
> board/friendlyarm/nanopi-neo-plus2/readme.txt | 37 ----
> ...3430-sdio.friendlyarm,nanopi-neo-plus2.txt | 53 ------
> board/friendlyarm/nanopi-neo2/boot.cmd | 6 -
> board/friendlyarm/nanopi-neo2/genimage.cfg | 40 -----
> board/friendlyarm/nanopi-neo2/readme.txt | 37 ----
> board/friendlyarm/nanopi-neo4/extlinux.conf | 4 -
> board/friendlyarm/nanopi-neo4/genimage.cfg | 22 ---
> board/friendlyarm/nanopi-neo4/post-build.sh | 5 -
> board/friendlyarm/nanopi-neo4/readme.txt | 53 ------
> board/friendlyarm/nanopi-r1/boot.cmd | 8 -
> board/friendlyarm/nanopi-r1/genimage.cfg | 37 ----
> .../nanopi-r1/kernel/linux-extras.config | 2 -
> .../nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts | 170 ------------------
> board/friendlyarm/nanopi-r1/readme.txt | 29 ---
> .../nanopi-r1/uboot/nanopi_r1_defconfig | 22 ---
> .../nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts | 102 -----------
> board/orangepi/orangepi-pc2/boot.cmd | 6 -
> board/orangepi/orangepi-pc2/genimage.cfg | 40 -----
> board/orangepi/orangepi-pc2/readme.txt | 37 ----
> board/orangepi/orangepi-plus/boot.cmd | 8 -
> board/orangepi/orangepi-plus/genimage.cfg | 36 ----
> board/orangepi/orangepi-plus/readme.txt | 29 ---
> board/orangepi/orangepi-prime/boot.cmd | 6 -
> board/orangepi/orangepi-prime/genimage.cfg | 40 -----
> board/orangepi/orangepi-prime/readme.txt | 37 ----
> board/orangepi/orangepi-rk3399/extlinux.conf | 4 -
> board/orangepi/orangepi-rk3399/genimage.cfg | 38 ----
> board/orangepi/orangepi-rk3399/post-build.sh | 5 -
> board/orangepi/orangepi-rk3399/readme.txt | 56 ------
> board/orangepi/orangepi-win/boot.cmd | 6 -
> board/orangepi/orangepi-win/genimage.cfg | 40 -----
> board/orangepi/orangepi-win/readme.txt | 37 ----
> board/pine64/pine64/boot.cmd | 6 -
> board/pine64/pine64/genimage.cfg | 40 -----
> board/pine64/pine64/readme.txt | 38 ----
> board/sinovoip/m1-plus/boot.cmd | 5 -
> board/sinovoip/m1-plus/genimage.cfg | 38 ----
> board/sinovoip/m1-plus/linux-wifi.fragment | 10 --
> ...nanapi-m1-plus-Disable-OOB-IRQ-for-b.patch | 39 ----
> board/sinovoip/m1-plus/post-build.sh | 4 -
> board/sinovoip/m1-plus/readme.txt | 64 -------
> ...rcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt | 1 -
> .../lib/firmware/brcm/brcmfmac43362-sdio.txt | 56 ------
> board/sinovoip/m2-plus/boot.cmd | 7 -
> board/sinovoip/m2-plus/genimage.cfg | 34 ----
> configs/amarula_a64_relic_defconfig | 63 -------
> configs/arm_juno_defconfig | 23 ---
> configs/bananapi_m1_defconfig | 29 ---
> configs/bananapi_m1_plus_defconfig | 45 -----
> configs/bananapi_m2_plus_defconfig | 30 ----
> configs/bananapi_m64_defconfig | 50 ------
> configs/friendlyarm_nanopc_t4_defconfig | 53 ------
> configs/friendlyarm_nanopi_a64_defconfig | 50 ------
> configs/friendlyarm_nanopi_m1_defconfig | 45 -----
> configs/friendlyarm_nanopi_m1_plus_defconfig | 45 -----
> configs/friendlyarm_nanopi_m4_defconfig | 53 ------
> configs/friendlyarm_nanopi_neo2_defconfig | 50 ------
> configs/friendlyarm_nanopi_neo4_defconfig | 55 ------
> .../friendlyarm_nanopi_neo_plus2_defconfig | 62 -------
> configs/friendlyarm_nanopi_r1_defconfig | 49 -----
> configs/orangepi_pc2_defconfig | 50 ------
> configs/orangepi_plus_defconfig | 44 -----
> configs/orangepi_prime_defconfig | 50 ------
> configs/orangepi_rk3399_defconfig | 53 ------
> configs/orangepi_win_defconfig | 48 -----
> configs/pine64_defconfig | 50 ------
> 101 files changed, 3559 deletions(-)
> delete mode 100644 board/amarula/a64-relic/extlinux.conf
> delete mode 100644 board/amarula/a64-relic/genimage.cfg
> delete mode 100755 board/amarula/a64-relic/post-build.sh
> delete mode 100644 board/amarula/a64-relic/readme.txt
> delete mode 100644 board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
> delete mode 100644 board/arm/juno/linux-juno-defconfig
> delete mode 100644 board/arm/juno/readme.txt
> delete mode 100644 board/bananapi/bananapi-m1/boot.cmd
> delete mode 100644 board/bananapi/bananapi-m1/genimage.cfg
> delete mode 100644 board/bananapi/bananapi-m1/readme.txt
> delete mode 100644 board/bananapi/bananapi-m64/boot.cmd
> delete mode 100644 board/bananapi/bananapi-m64/genimage.cfg
> delete mode 100644 board/bananapi/bananapi-m64/readme.txt
> delete mode 100644 board/friendlyarm/nanopc-t4/extlinux.conf
> delete mode 100644 board/friendlyarm/nanopc-t4/genimage.cfg
> delete mode 100755 board/friendlyarm/nanopc-t4/post-build.sh
> delete mode 100644 board/friendlyarm/nanopc-t4/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-a64/boot.cmd
> delete mode 100644 board/friendlyarm/nanopi-a64/genimage.cfg
> delete mode 100644 board/friendlyarm/nanopi-a64/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-m1-plus/boot.cmd
> delete mode 100644 board/friendlyarm/nanopi-m1-plus/genimage.cfg
> delete mode 100644 board/friendlyarm/nanopi-m1-plus/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-m1/boot.cmd
> delete mode 100644 board/friendlyarm/nanopi-m1/genimage.cfg
> delete mode 100644 board/friendlyarm/nanopi-m1/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-m4/extlinux.conf
> delete mode 100644 board/friendlyarm/nanopi-m4/genimage.cfg
> delete mode 100755 board/friendlyarm/nanopi-m4/post-build.sh
> delete mode 100644 board/friendlyarm/nanopi-m4/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-neo-plus2/extlinux.conf
> delete mode 100644 board/friendlyarm/nanopi-neo-plus2/genimage.cfg
> delete mode 100644 board/friendlyarm/nanopi-neo-plus2/linux-extras.config
> delete mode 100755 board/friendlyarm/nanopi-neo-plus2/post-build.sh
> delete mode 100644 board/friendlyarm/nanopi-neo-plus2/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
> delete mode 100644 board/friendlyarm/nanopi-neo2/boot.cmd
> delete mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
> delete mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-neo4/extlinux.conf
> delete mode 100644 board/friendlyarm/nanopi-neo4/genimage.cfg
> delete mode 100755 board/friendlyarm/nanopi-neo4/post-build.sh
> delete mode 100644 board/friendlyarm/nanopi-neo4/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-r1/boot.cmd
> delete mode 100644 board/friendlyarm/nanopi-r1/genimage.cfg
> delete mode 100644 board/friendlyarm/nanopi-r1/kernel/linux-extras.config
> delete mode 100644 board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
> delete mode 100644 board/friendlyarm/nanopi-r1/readme.txt
> delete mode 100644 board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
> delete mode 100644 board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
> delete mode 100644 board/orangepi/orangepi-pc2/boot.cmd
> delete mode 100644 board/orangepi/orangepi-pc2/genimage.cfg
> delete mode 100644 board/orangepi/orangepi-pc2/readme.txt
> delete mode 100644 board/orangepi/orangepi-plus/boot.cmd
> delete mode 100644 board/orangepi/orangepi-plus/genimage.cfg
> delete mode 100644 board/orangepi/orangepi-plus/readme.txt
> delete mode 100644 board/orangepi/orangepi-prime/boot.cmd
> delete mode 100644 board/orangepi/orangepi-prime/genimage.cfg
> delete mode 100644 board/orangepi/orangepi-prime/readme.txt
> delete mode 100644 board/orangepi/orangepi-rk3399/extlinux.conf
> delete mode 100644 board/orangepi/orangepi-rk3399/genimage.cfg
> delete mode 100755 board/orangepi/orangepi-rk3399/post-build.sh
> delete mode 100644 board/orangepi/orangepi-rk3399/readme.txt
> delete mode 100644 board/orangepi/orangepi-win/boot.cmd
> delete mode 100644 board/orangepi/orangepi-win/genimage.cfg
> delete mode 100644 board/orangepi/orangepi-win/readme.txt
> delete mode 100644 board/pine64/pine64/boot.cmd
> delete mode 100644 board/pine64/pine64/genimage.cfg
> delete mode 100644 board/pine64/pine64/readme.txt
> delete mode 100644 board/sinovoip/m1-plus/boot.cmd
> delete mode 100644 board/sinovoip/m1-plus/genimage.cfg
> delete mode 100644 board/sinovoip/m1-plus/linux-wifi.fragment
> delete mode 100644 board/sinovoip/m1-plus/patches/linux/0001-ARM-dts-sun7i-bananapi-m1-plus-Disable-OOB-IRQ-for-b.patch
> delete mode 100755 board/sinovoip/m1-plus/post-build.sh
> delete mode 100644 board/sinovoip/m1-plus/readme.txt
> delete mode 120000 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.sinovoip,bpi-m1-plus.txt
> delete mode 100644 board/sinovoip/m1-plus/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt
> delete mode 100644 board/sinovoip/m2-plus/boot.cmd
> delete mode 100644 board/sinovoip/m2-plus/genimage.cfg
> delete mode 100644 configs/amarula_a64_relic_defconfig
> delete mode 100644 configs/arm_juno_defconfig
> delete mode 100644 configs/bananapi_m1_defconfig
> delete mode 100644 configs/bananapi_m1_plus_defconfig
> delete mode 100644 configs/bananapi_m2_plus_defconfig
> delete mode 100644 configs/bananapi_m64_defconfig
> delete mode 100644 configs/friendlyarm_nanopc_t4_defconfig
> delete mode 100644 configs/friendlyarm_nanopi_a64_defconfig
> delete mode 100644 configs/friendlyarm_nanopi_m1_defconfig
> delete mode 100644 configs/friendlyarm_nanopi_m1_plus_defconfig
> delete mode 100644 configs/friendlyarm_nanopi_m4_defconfig
> delete mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
> delete mode 100644 configs/friendlyarm_nanopi_neo4_defconfig
> delete mode 100644 configs/friendlyarm_nanopi_neo_plus2_defconfig
> delete mode 100644 configs/friendlyarm_nanopi_r1_defconfig
> delete mode 100644 configs/orangepi_pc2_defconfig
> delete mode 100644 configs/orangepi_plus_defconfig
> delete mode 100644 configs/orangepi_prime_defconfig
> delete mode 100644 configs/orangepi_rk3399_defconfig
> delete mode 100644 configs/orangepi_win_defconfig
> delete mode 100644 configs/pine64_defconfig
>
> --
> 2.37.3
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2022-11-07 21:23 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-11-01 22:03 [Buildroot] [PATCH 00/21] First batch of defconfig removals Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 01/21] configs/amarula_a64_relic: remove defconfig Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 02/21] configs/arm_juno: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 03/21] configs/bananapi_m1: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 04/21] configs/bananapi_m1_plus: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 05/21] configs/bananapi_m2_plus: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 06/21] configs/bananapi_m64: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 07/21] configs/friendlyarm_nanopc_t4: " Thomas Petazzoni via buildroot
2022-11-01 22:03 ` [Buildroot] [PATCH 08/21] configs/friendlyarm_nanopi_a64: " Thomas Petazzoni via buildroot
2022-11-01 22:18 ` [Buildroot] [PATCH 09/21] configs/friendlyarm_nanopi_m1: " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 10/21] " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 11/21] configs/friendlyarm_nanopi_m4: " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 12/21] configs/friendlyarm_nanopi_neo2: " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 13/21] configs/friendlyarm_nanopi_neo4: " Thomas Petazzoni via buildroot
2022-11-01 22:19 ` [Buildroot] [PATCH 14/21] configs/friendlyarm_nanopi_neo_plus2: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 15/21] configs/friendlyarm_nanopi_r1: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 16/21] configs/orangepi_pc2: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 17/21] configs/orangepi_plus: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 18/21] configs/orangepi_prime: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 19/21] configs/orangepi_rk3399: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 20/21] configs/orangepi_win: " Thomas Petazzoni via buildroot
2022-11-01 22:20 ` [Buildroot] [PATCH 21/21] configs/pine64: " Thomas Petazzoni via buildroot
2022-11-02 11:44 ` Michael Nosthoff via buildroot
2022-11-07 21:20 ` [Buildroot] [PATCH 00/21] First batch of defconfig removals Yann E. MORIN
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.