All of lore.kernel.org
 help / color / mirror / Atom feed
From: Udit Kumar <u-kumar1@ti.com>
To: <linux-arm-kernel@lists.infradead.org>, <afd@ti.com>, <bb@ti.com>,
	<vaishnav.a@ti.com>, <j-choudhary@ti.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<a-govindraju@ti.com>, <kishon@ti.com>
Cc: Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH 2/2] arm64: dts: ti: k3-j7200-common-proc-board: Enable I2C
Date: Fri, 14 Apr 2023 23:44:34 +0530	[thread overview]
Message-ID: <20230414181434.2046049-3-u-kumar1@ti.com> (raw)
In-Reply-To: <20230414181434.2046049-1-u-kumar1@ti.com>

All I2C nodes were disabled in SOC dts file and in board
dts needed nodes were enabled.
This patch enables wkup_i2c0 node in board dts file.

Fixes: a9ed915cd55c ("arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level")

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 63633e4f6c59..e66bbfe65ff2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -254,6 +254,10 @@ exp3: gpio@20 {
 	};
 };
 
+&wkup_i2c0 {
+	status = "okay";
+};
+
 &main_sdhci0 {
 	/* eMMC */
 	non-removable;
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Udit Kumar <u-kumar1@ti.com>
To: <linux-arm-kernel@lists.infradead.org>, <afd@ti.com>, <bb@ti.com>,
	<vaishnav.a@ti.com>, <j-choudhary@ti.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<a-govindraju@ti.com>, <kishon@ti.com>
Cc: Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH 2/2] arm64: dts: ti: k3-j7200-common-proc-board: Enable I2C
Date: Fri, 14 Apr 2023 23:44:34 +0530	[thread overview]
Message-ID: <20230414181434.2046049-3-u-kumar1@ti.com> (raw)
In-Reply-To: <20230414181434.2046049-1-u-kumar1@ti.com>

All I2C nodes were disabled in SOC dts file and in board
dts needed nodes were enabled.
This patch enables wkup_i2c0 node in board dts file.

Fixes: a9ed915cd55c ("arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level")

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 63633e4f6c59..e66bbfe65ff2 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -254,6 +254,10 @@ exp3: gpio@20 {
 	};
 };
 
+&wkup_i2c0 {
+	status = "okay";
+};
+
 &main_sdhci0 {
 	/* eMMC */
 	non-removable;
-- 
2.34.1


  parent reply	other threads:[~2023-04-14 18:15 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-14 18:14 [PATCH 0/2] arm64: dts: ti: k3-j7200-common-proc-board fixes Udit Kumar
2023-04-14 18:14 ` Udit Kumar
2023-04-14 18:14 ` [PATCH 1/2] arm64: dts: ti: k3-j7200: Fix physical address of pin Udit Kumar
2023-04-14 18:14   ` Udit Kumar
2023-04-14 18:26   ` Nishanth Menon
2023-04-14 18:26     ` Nishanth Menon
2023-04-15  4:10     ` Kumar, Udit
2023-04-15  4:10       ` Kumar, Udit
2023-04-15 12:47       ` Nishanth Menon
2023-04-15 12:47         ` Nishanth Menon
2023-04-14 18:14 ` Udit Kumar [this message]
2023-04-14 18:14   ` [PATCH 2/2] arm64: dts: ti: k3-j7200-common-proc-board: Enable I2C Udit Kumar
2023-04-14 18:24   ` Nishanth Menon
2023-04-14 18:24     ` Nishanth Menon
2023-04-15  4:06     ` Kumar, Udit
2023-04-15  4:06       ` Kumar, Udit
2023-04-15 12:47       ` Nishanth Menon
2023-04-15 12:47         ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230414181434.2046049-3-u-kumar1@ti.com \
    --to=u-kumar1@ti.com \
    --cc=a-govindraju@ti.com \
    --cc=afd@ti.com \
    --cc=bb@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=j-choudhary@ti.com \
    --cc=kishon@ti.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vaishnav.a@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.