From: Jisheng Zhang <jszhang@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guo Ren <guoren@kernel.org>, Fu Wei <wefu@redhat.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org
Subject: [PATCH v3 5/8] riscv: dts: add initial T-HEAD TH1520 SoC device tree
Date: Sun, 18 Jun 2023 00:15:26 +0800 [thread overview]
Message-ID: <20230617161529.2092-6-jszhang@kernel.org> (raw)
In-Reply-To: <20230617161529.2092-1-jszhang@kernel.org>
Add initial device tree for the TH1520 RISC-V SoC by T-HEAD.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
arch/riscv/boot/dts/thead/th1520.dtsi | 422 ++++++++++++++++++++++++++
1 file changed, 422 insertions(+)
create mode 100644 arch/riscv/boot/dts/thead/th1520.dtsi
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
new file mode 100644
index 000000000000..56a73134b49e
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Alibaba Group Holding Limited.
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "thead,th1520";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <3000000>;
+
+ c910_0: cpu@0 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <0>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_1: cpu@1 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <1>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_2: cpu@2 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <2>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_3: cpu@3 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <3>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ l2_cache: l2-cache {
+ compatible = "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-size = <1048576>;
+ cache-sets = <1024>;
+ cache-unified;
+ };
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_24m";
+ #clock-cells = <0>;
+ };
+
+ osc_32k: 32k-oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_32k";
+ #clock-cells = <0>;
+ };
+
+ apb_clk: apb-clk-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "apb_clk";
+ #clock-cells = <0>;
+ };
+
+ uart_sclk: uart-sclk-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "uart_sclk";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ plic: interrupt-controller@ffd8000000 {
+ compatible = "thead,th1520-plic", "thead,c900-plic";
+ reg = <0xff 0xd8000000 0x0 0x01000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ riscv,ndev = <240>;
+ };
+
+ clint: timer@ffdc000000 {
+ compatible = "thead,th1520-clint", "thead,c900-clint";
+ reg = <0xff 0xdc000000 0x0 0x00010000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>;
+ };
+
+ uart0: serial@ffe7014000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7014000 0x0 0x100>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@ffe7f00000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7f00000 0x0 0x100>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@ffe7f04000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7f04000 0x0 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ gpio2: gpio@ffe7f34000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xe7f34000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio3: gpio@ffe7f38000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xe7f38000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio0: gpio@ffec005000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xec005000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@ffec006000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xec006000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ uart2: serial@ffec010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xec010000 0x0 0x4000>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@ffefc00000 {
+ compatible = "snps,axi-dma-1.01a";
+ reg = <0xff 0xefc00000 0x0 0x1000>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb_clk>, <&apb_clk>;
+ clock-names = "core-clk", "cfgr-clk";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ snps,block-size = <65536 65536 65536 65536>;
+ snps,priority = <0 1 2 3>;
+ snps,dma-masters = <1>;
+ snps,data-width = <4>;
+ snps,axi-max-burst-len = <16>;
+ status = "disabled";
+ };
+
+ timer0: timer@ffefc32000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32000 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer1: timer@ffefc32014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32014 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer2: timer@ffefc32028 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32028 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer3: timer@ffefc3203c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc3203c 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart4: serial@fff7f08000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xf7f08000 0x0 0x4000>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart5: serial@fff7f0c000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xf7f0c000 0x0 0x4000>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ timer4: timer@ffffc33000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33000 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer5: timer@ffffc33014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33014 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer6: timer@ffffc33028 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33028 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer7: timer@ffffc3303c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc3303c 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ao_gpio0: gpio@fffff41000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xfff41000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ ao_gpio1: gpio@fffff52000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xfff52000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
--
2.40.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guo Ren <guoren@kernel.org>, Fu Wei <wefu@redhat.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org
Subject: [PATCH v3 5/8] riscv: dts: add initial T-HEAD TH1520 SoC device tree
Date: Sun, 18 Jun 2023 00:15:26 +0800 [thread overview]
Message-ID: <20230617161529.2092-6-jszhang@kernel.org> (raw)
In-Reply-To: <20230617161529.2092-1-jszhang@kernel.org>
Add initial device tree for the TH1520 RISC-V SoC by T-HEAD.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
arch/riscv/boot/dts/thead/th1520.dtsi | 422 ++++++++++++++++++++++++++
1 file changed, 422 insertions(+)
create mode 100644 arch/riscv/boot/dts/thead/th1520.dtsi
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
new file mode 100644
index 000000000000..56a73134b49e
--- /dev/null
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Alibaba Group Holding Limited.
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "thead,th1520";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <3000000>;
+
+ c910_0: cpu@0 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <0>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_1: cpu@1 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <1>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu1_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_2: cpu@2 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <2>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu2_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ c910_3: cpu@3 {
+ compatible = "thead,c910", "riscv";
+ device_type = "cpu";
+ riscv,isa = "rv64imafdc";
+ reg = <3>;
+ i-cache-block-size = <64>;
+ i-cache-size = <65536>;
+ i-cache-sets = <512>;
+ d-cache-block-size = <64>;
+ d-cache-size = <65536>;
+ d-cache-sets = <512>;
+ next-level-cache = <&l2_cache>;
+ mmu-type = "riscv,sv39";
+
+ cpu3_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ l2_cache: l2-cache {
+ compatible = "cache";
+ cache-block-size = <64>;
+ cache-level = <2>;
+ cache-size = <1048576>;
+ cache-sets = <1024>;
+ cache-unified;
+ };
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_24m";
+ #clock-cells = <0>;
+ };
+
+ osc_32k: 32k-oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_32k";
+ #clock-cells = <0>;
+ };
+
+ apb_clk: apb-clk-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "apb_clk";
+ #clock-cells = <0>;
+ };
+
+ uart_sclk: uart-sclk-clock {
+ compatible = "fixed-clock";
+ clock-output-names = "uart_sclk";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ plic: interrupt-controller@ffd8000000 {
+ compatible = "thead,th1520-plic", "thead,c900-plic";
+ reg = <0xff 0xd8000000 0x0 0x01000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+ <&cpu1_intc 11>, <&cpu1_intc 9>,
+ <&cpu2_intc 11>, <&cpu2_intc 9>,
+ <&cpu3_intc 11>, <&cpu3_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ riscv,ndev = <240>;
+ };
+
+ clint: timer@ffdc000000 {
+ compatible = "thead,th1520-clint", "thead,c900-clint";
+ reg = <0xff 0xdc000000 0x0 0x00010000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>,
+ <&cpu2_intc 3>, <&cpu2_intc 7>,
+ <&cpu3_intc 3>, <&cpu3_intc 7>;
+ };
+
+ uart0: serial@ffe7014000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7014000 0x0 0x100>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@ffe7f00000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7f00000 0x0 0x100>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@ffe7f04000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xe7f04000 0x0 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ gpio2: gpio@ffe7f34000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xe7f34000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio3: gpio@ffe7f38000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xe7f38000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio0: gpio@ffec005000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xec005000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@ffec006000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xec006000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ uart2: serial@ffec010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xec010000 0x0 0x4000>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@ffefc00000 {
+ compatible = "snps,axi-dma-1.01a";
+ reg = <0xff 0xefc00000 0x0 0x1000>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb_clk>, <&apb_clk>;
+ clock-names = "core-clk", "cfgr-clk";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ snps,block-size = <65536 65536 65536 65536>;
+ snps,priority = <0 1 2 3>;
+ snps,dma-masters = <1>;
+ snps,data-width = <4>;
+ snps,axi-max-burst-len = <16>;
+ status = "disabled";
+ };
+
+ timer0: timer@ffefc32000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32000 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer1: timer@ffefc32014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32014 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer2: timer@ffefc32028 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc32028 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer3: timer@ffefc3203c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xefc3203c 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart4: serial@fff7f08000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xf7f08000 0x0 0x4000>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart5: serial@fff7f0c000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xff 0xf7f0c000 0x0 0x4000>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_sclk>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ timer4: timer@ffffc33000 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33000 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer5: timer@ffffc33014 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33014 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer6: timer@ffffc33028 {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc33028 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer7: timer@ffffc3303c {
+ compatible = "snps,dw-apb-timer";
+ reg = <0xff 0xffc3303c 0x0 0x14>;
+ clocks = <&apb_clk>;
+ clock-names = "timer";
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ao_gpio0: gpio@fffff41000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xfff41000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ ao_gpio1: gpio@fffff52000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xff 0xfff52000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+};
--
2.40.0
next prev parent reply other threads:[~2023-06-17 16:27 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-17 16:15 [PATCH v3 0/8] Add Sipeed Lichee Pi 4A RISC-V board support Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang
2023-06-17 16:15 ` [PATCH v3 1/8] dt-bindings: interrupt-controller: Add T-HEAD's TH1520 PLIC Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang
2023-06-17 16:15 ` [PATCH v3 2/8] dt-bindings: timer: Add T-HEAD TH1520 clint Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang
2023-06-17 16:15 ` [PATCH v3 3/8] dt-bindings: riscv: Add T-HEAD TH1520 board compatibles Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang
2023-06-17 16:15 ` [PATCH v3 4/8] riscv: Add the T-HEAD SoC family Kconfig option Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang [this message]
2023-06-17 16:15 ` [PATCH v3 5/8] riscv: dts: add initial T-HEAD TH1520 SoC device tree Jisheng Zhang
2023-06-17 16:15 ` [PATCH v3 6/8] riscv: dts: thead: add sipeed Lichee Pi 4A board " Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang
2023-06-17 16:15 ` [PATCH v3 7/8] MAINTAINERS: add entry for T-HEAD RISC-V SoC Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang
2023-06-17 16:15 ` [PATCH v3 8/8] riscv: defconfig: enable T-HEAD SoC Jisheng Zhang
2023-06-17 16:15 ` Jisheng Zhang
2023-06-17 17:02 ` [PATCH v3 0/8] Add Sipeed Lichee Pi 4A RISC-V board support Conor Dooley
2023-06-17 17:02 ` Conor Dooley
2023-06-18 16:14 ` Jisheng Zhang
2023-06-18 16:14 ` Jisheng Zhang
2023-06-17 18:20 ` Conor Dooley
2023-06-17 18:20 ` Conor Dooley
2023-06-18 16:25 ` Jisheng Zhang
2023-06-18 16:25 ` Jisheng Zhang
2023-06-18 21:01 ` Conor Dooley
2023-06-18 21:01 ` Conor Dooley
2023-06-20 22:52 ` Conor Dooley
2023-06-20 22:52 ` Conor Dooley
2023-06-20 22:55 ` Conor Dooley
2023-06-20 22:55 ` Conor Dooley
2023-07-25 7:38 ` Xi Ruoyao
2023-07-25 7:38 ` Xi Ruoyao
2023-07-25 7:52 ` Conor Dooley
2023-07-25 7:52 ` Conor Dooley
2023-07-25 8:10 ` Conor Dooley
2023-07-25 8:10 ` Conor Dooley
2023-07-25 14:32 ` Drew Fustini
2023-07-25 14:32 ` Drew Fustini
2023-07-25 8:26 ` Xi Ruoyao
2023-07-25 8:26 ` Xi Ruoyao
2023-07-25 14:58 ` Jisheng Zhang
2023-07-25 14:58 ` Jisheng Zhang
2023-07-26 12:48 ` Xi Ruoyao
2023-07-26 12:48 ` Xi Ruoyao
2023-07-26 15:00 ` Jisheng Zhang
2023-07-26 15:00 ` Jisheng Zhang
2023-07-27 0:14 ` Xi Ruoyao
2023-07-27 0:14 ` Xi Ruoyao
2023-07-27 0:54 ` Xi Ruoyao
2023-07-27 0:54 ` Xi Ruoyao
2023-07-27 9:18 ` Xi Ruoyao
2023-07-27 9:18 ` Xi Ruoyao
2023-07-27 16:11 ` Jisheng Zhang
2023-07-27 16:11 ` Jisheng Zhang
2023-07-27 16:29 ` Xi Ruoyao
2023-07-27 16:29 ` Xi Ruoyao
2023-07-28 7:04 ` Drew Fustini
2023-07-28 7:04 ` Drew Fustini
2023-07-28 7:40 ` Xi Ruoyao
2023-07-28 7:40 ` Xi Ruoyao
2023-07-28 10:05 ` Xi Ruoyao
2023-07-28 10:05 ` Xi Ruoyao
2023-07-28 10:23 ` Emil Renner Berthing
2023-07-28 10:23 ` Emil Renner Berthing
2023-07-28 17:53 ` Drew Fustini
2023-07-28 17:53 ` Drew Fustini
2023-07-29 7:11 ` Xi Ruoyao
2023-07-29 7:11 ` Xi Ruoyao
2023-07-28 0:11 ` Drew Fustini
2023-07-28 0:11 ` Drew Fustini
2023-08-11 17:39 ` Drew Fustini
2023-08-11 17:39 ` Drew Fustini
2023-08-11 17:46 ` Conor Dooley
2023-08-11 17:46 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230617161529.2092-6-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=guoren@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=maz@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=tglx@linutronix.de \
--cc=wefu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.