All of lore.kernel.org
 help / color / mirror / Atom feed
From: Deepak Gupta <debug@rivosinc.com>
To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: richard.henderson@linaro.org, pbonzini@redhat.com,
	palmer@dabbelt.com, Alistair.Francis@wdc.com, laurent@vivier.eu,
	bmeng.cn@gmail.com, liwei1518@gmail.com,
	dbarboza@ventanamicro.com, zhiwei_liu@linux.alibaba.com,
	Deepak Gupta <debug@rivosinc.com>, Jim Shu <jim.shu@sifive.com>,
	Andy Chiu <andy.chiu@sifive.com>
Subject: [PATCH v3 12/20] target/riscv: implement zicfiss instructions
Date: Tue,  6 Aug 2024 17:06:43 -0700	[thread overview]
Message-ID: <20240807000652.1417776-13-debug@rivosinc.com> (raw)
In-Reply-To: <20240807000652.1417776-1-debug@rivosinc.com>

zicfiss has following instructions
 - sspopchk: pops a value from shadow stack and compares with x1/x5.
   If they dont match, reports a sw check exception with tval = 3.
 - sspush: pushes value in x1/x5 on shadow stack
 - ssrdp: reads current shadow stack
 - ssamoswap: swaps contents of shadow stack atomically

sspopchk/sspush/ssrdp default to zimop if zimop implemented and SSE=0

If SSE=0, ssamoswap is illegal instruction exception.

This patch implements shadow stack operations for qemu-user and shadow
stack is not protected.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
---
 target/riscv/cpu_bits.h                       |   2 +
 target/riscv/insn32.decode                    |  17 +-
 target/riscv/insn_trans/trans_rva.c.inc       |  47 ++++++
 target/riscv/insn_trans/trans_rvzicfiss.c.inc | 149 ++++++++++++++++++
 target/riscv/translate.c                      |   1 +
 5 files changed, 214 insertions(+), 2 deletions(-)
 create mode 100644 target/riscv/insn_trans/trans_rvzicfiss.c.inc

diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h
index 226157896d..5ebc4dd5b3 100644
--- a/target/riscv/cpu_bits.h
+++ b/target/riscv/cpu_bits.h
@@ -702,6 +702,8 @@ typedef enum RISCVException {
 
 /* zicfilp defines lp violation results in sw check with tval = 2*/
 #define RISCV_EXCP_SW_CHECK_FCFI_TVAL      2
+/* zicfiss defines ss violation results in sw check with tval = 3*/
+#define RISCV_EXCP_SW_CHECK_BCFI_TVAL      3
 
 #define RISCV_EXCP_INT_FLAG                0x80000000
 #define RISCV_EXCP_INT_MASK                0x7fffffff
diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode
index c963c59c8e..c59c992ce2 100644
--- a/target/riscv/insn32.decode
+++ b/target/riscv/insn32.decode
@@ -65,8 +65,10 @@
 # Formats 32:
 @r       .......   ..... ..... ... ..... ....... &r                %rs2 %rs1 %rd
 @i       ............    ..... ... ..... ....... &i      imm=%imm_i     %rs1 %rd
+@ss_pop  ............    ..... ... ..... ....... &i      imm=0 %rs1 rd=0
 @b       .......   ..... ..... ... ..... ....... &b      imm=%imm_b %rs2 %rs1
 @s       .......   ..... ..... ... ..... ....... &s      imm=%imm_s %rs2 %rs1
+@ss_push .......   ..... ..... ... ..... ....... &s      imm=0 %rs2 rs1=0
 @u       ....................      ..... ....... &u      imm=%imm_u          %rd
 @j       ....................      ..... ....... &j      imm=%imm_j          %rd
 
@@ -247,6 +249,7 @@ remud    0000001 .....  ..... 111 ..... 1111011 @r
 lr_w       00010 . . 00000 ..... 010 ..... 0101111 @atom_ld
 sc_w       00011 . . ..... ..... 010 ..... 0101111 @atom_st
 amoswap_w  00001 . . ..... ..... 010 ..... 0101111 @atom_st
+ssamoswap_w 01001 . . ..... ..... 010 ..... 0101111 @atom_st
 amoadd_w   00000 . . ..... ..... 010 ..... 0101111 @atom_st
 amoxor_w   00100 . . ..... ..... 010 ..... 0101111 @atom_st
 amoand_w   01100 . . ..... ..... 010 ..... 0101111 @atom_st
@@ -260,6 +263,7 @@ amomaxu_w  11100 . . ..... ..... 010 ..... 0101111 @atom_st
 lr_d       00010 . . 00000 ..... 011 ..... 0101111 @atom_ld
 sc_d       00011 . . ..... ..... 011 ..... 0101111 @atom_st
 amoswap_d  00001 . . ..... ..... 011 ..... 0101111 @atom_st
+ssamoswap_d 01001 . . ..... ..... 011 ..... 0101111 @atom_st
 amoadd_d   00000 . . ..... ..... 011 ..... 0101111 @atom_st
 amoxor_d   00100 . . ..... ..... 011 ..... 0101111 @atom_st
 amoand_d   01100 . . ..... ..... 011 ..... 0101111 @atom_st
@@ -1023,8 +1027,17 @@ amocas_d    00101 . . ..... ..... 011 ..... 0101111 @atom_st
 amocas_q    00101 . . ..... ..... 100 ..... 0101111 @atom_st
 
 # *** Zimop may-be-operation extension ***
-mop_r_n     1 . 00 .. 0111 .. ..... 100 ..... 1110011 @mop5
-mop_rr_n    1 . 00 .. 1 ..... ..... 100 ..... 1110011 @mop3
+{
+  # zicfiss instructions carved out of mop.r
+  ssrdp      1100110 11100     00000 100 ..... 1110011 %rd
+  sspopchk   1100110 11100     ..... 100 00000 1110011 @ss_pop
+  mop_r_n    1 . 00 .. 0111 .. ..... 100 ..... 1110011 @mop5
+}
+{
+  # zicfiss instruction carved out of mop.rr
+  sspush     1100111 .....     00000 100 00000 1110011 @ss_push
+  mop_rr_n   1 . 00 .. 1 ..... ..... 100 ..... 1110011 @mop3
+}
 
 # *** Zabhb Standard Extension ***
 amoswap_b  00001 . . ..... ..... 000 ..... 0101111 @atom_st
diff --git a/target/riscv/insn_trans/trans_rva.c.inc b/target/riscv/insn_trans/trans_rva.c.inc
index 39bbf60f3c..db6c03f6a8 100644
--- a/target/riscv/insn_trans/trans_rva.c.inc
+++ b/target/riscv/insn_trans/trans_rva.c.inc
@@ -18,6 +18,8 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "exec/memop.h"
+
 #define REQUIRE_A_OR_ZAAMO(ctx) do {                      \
     if (!ctx->cfg_ptr->ext_zaamo && !has_ext(ctx, RVA)) { \
         return false;                                     \
@@ -114,6 +116,28 @@ static bool trans_amoswap_w(DisasContext *ctx, arg_amoswap_w *a)
     return gen_amo(ctx, a, &tcg_gen_atomic_xchg_tl, MO_TESL);
 }
 
+static bool trans_ssamoswap_w(DisasContext *ctx, arg_amoswap_w *a)
+{
+    REQUIRE_A_OR_ZAAMO(ctx);
+    /* default for qemu-user, use regular RW memory and thus mmu_idx=0 */
+    int ss_mmu_idx = 0;
+
+    /* back cfi was not enabled, return false */
+    if (!ctx->bcfi_enabled) {
+        return false;
+    }
+
+    TCGv dest = dest_gpr(ctx, a->rd);
+    TCGv src1, src2 = get_gpr(ctx, a->rs2, EXT_NONE);
+
+    decode_save_opc(ctx);
+    src1 = get_address(ctx, a->rs1, 0);
+
+    tcg_gen_atomic_xchg_tl(dest, src1, src2, ss_mmu_idx, (MO_ALIGN | MO_TESL));
+    gen_set_gpr(ctx, a->rd, dest);
+    return true;
+}
+
 static bool trans_amoadd_w(DisasContext *ctx, arg_amoadd_w *a)
 {
     REQUIRE_A_OR_ZAAMO(ctx);
@@ -183,6 +207,29 @@ static bool trans_amoswap_d(DisasContext *ctx, arg_amoswap_d *a)
     return gen_amo(ctx, a, &tcg_gen_atomic_xchg_tl, MO_TEUQ);
 }
 
+static bool trans_ssamoswap_d(DisasContext *ctx, arg_amoswap_w *a)
+{
+    REQUIRE_64BIT(ctx);
+    REQUIRE_A_OR_ZAAMO(ctx);
+    /* default for qemu-user, use regular RW memory and thus mmu_idx=0 */
+    int ss_mmu_idx = 0;
+
+    /* back cfi was not enabled, return false */
+    if (!ctx->bcfi_enabled) {
+        return false;
+    }
+
+    TCGv dest = dest_gpr(ctx, a->rd);
+    TCGv src1, src2 = get_gpr(ctx, a->rs2, EXT_NONE);
+
+    decode_save_opc(ctx);
+    src1 = get_address(ctx, a->rs1, 0);
+
+    tcg_gen_atomic_xchg_tl(dest, src1, src2, ss_mmu_idx, (MO_ALIGN | MO_TESQ));
+    gen_set_gpr(ctx, a->rd, dest);
+    return true;
+}
+
 static bool trans_amoadd_d(DisasContext *ctx, arg_amoadd_d *a)
 {
     REQUIRE_64BIT(ctx);
diff --git a/target/riscv/insn_trans/trans_rvzicfiss.c.inc b/target/riscv/insn_trans/trans_rvzicfiss.c.inc
new file mode 100644
index 0000000000..c538b7ad99
--- /dev/null
+++ b/target/riscv/insn_trans/trans_rvzicfiss.c.inc
@@ -0,0 +1,149 @@
+/*
+ * RISC-V translation routines for the Control-Flow Integrity Extension
+ *
+ * Copyright (c) 2024 Rivos Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+static MemOp mxl_memop(DisasContext *ctx)
+{
+    switch (get_xl(ctx)) {
+    case MXL_RV32:
+        return MO_TEUL;
+
+    case MXL_RV64:
+        return MO_TEUQ;
+
+    case MXL_RV128:
+        return MO_TEUO;
+
+    default:
+        g_assert_not_reached();
+    }
+}
+
+static bool trans_sspopchk(DisasContext *ctx, arg_sspopchk *a)
+{
+    /* default for qemu-user, use regular RW memory and thus mmu_idx=0 */
+    int ss_mmu_idx = 0;
+
+    /* sspopchk only supported on 32bit and 64bit */
+    if (get_xl(ctx) != MXL_RV32 && get_xl(ctx) != MXL_RV64) {
+        return false;
+    }
+
+    /* back cfi was not enabled, return false */
+    if (!ctx->bcfi_enabled) {
+        return false;
+    }
+
+    /*
+     * sspopchk can only compare with x1 or x5. Everything else defaults to
+     * zimops
+     */
+
+    if (a->rs1 != 1 && a->rs1 != 5) {
+        return false;
+    }
+
+    /*
+     * get data in TCGv using get_gpr
+     * get addr in TCGv using gen_helper_csrr on CSR_SSP
+     * use some tcg subtract arithmetic (subtract by XLEN) on addr
+     * perform ss store on computed address
+     */
+
+    TCGv addr = tcg_temp_new();
+    TCGLabel *skip = gen_new_label();
+    uint32_t tmp = (get_xl(ctx) == MXL_RV64) ? 8 : 4;
+    TCGv_i32 ssp_csr = tcg_constant_i32(CSR_SSP);
+    TCGv data = tcg_temp_new();
+    gen_helper_csrr(addr, tcg_env, ssp_csr);
+
+    tcg_gen_qemu_ld_tl(data, addr, ss_mmu_idx,
+                       mxl_memop(ctx) | MO_ALIGN);
+    TCGv rs1 = get_gpr(ctx, a->rs1, EXT_NONE);
+    tcg_gen_brcond_tl(TCG_COND_EQ, data, rs1, skip);
+    gen_helper_raise_sw_check_excep(tcg_env,
+        tcg_constant_tl(RISCV_EXCP_SW_CHECK_BCFI_TVAL), data, rs1);
+    gen_set_label(skip);
+    tcg_gen_addi_tl(addr, addr, tmp);
+    gen_helper_csrw(tcg_env, ssp_csr, addr);
+
+    return true;
+}
+
+static bool trans_sspush(DisasContext *ctx, arg_sspush *a)
+{
+    /* default for qemu-user, use regular RW memory and thus mmu_idx=0 */
+    int ss_mmu_idx = 0;
+
+    /* sspush only supported on 32bit and 64bit */
+    if (get_xl(ctx) != MXL_RV32 && get_xl(ctx) != MXL_RV64) {
+        return false;
+    }
+
+    /* back cfi was not enabled, return false */
+    if (!ctx->bcfi_enabled) {
+        return false;
+    }
+
+    /*
+     * sspush can only push from x1 or x5. Everything else defaults to zimop
+     */
+    if (a->rs2 != 1 && a->rs2 != 5) {
+        return false;
+    }
+
+    /*
+     * get data in TCGv using get_gpr
+     * get addr in TCGv using gen_helper_csrr on CSR_SSP
+     * use some tcg subtract arithmetic (subtract by XLEN) on addr
+     * perform ss store on computed address
+     */
+
+    TCGv addr = tcg_temp_new();
+    int tmp = (get_xl(ctx) == MXL_RV64) ? -8 : -4;
+    TCGv_i32 ssp_csr = tcg_constant_i32(CSR_SSP);
+    TCGv data = get_gpr(ctx, a->rs2, EXT_NONE);
+    gen_helper_csrr(addr, tcg_env, ssp_csr);
+
+    tcg_gen_addi_tl(addr, addr, tmp);
+
+    tcg_gen_qemu_st_tl(data, addr, ss_mmu_idx,
+                       mxl_memop(ctx) | MO_ALIGN);
+    gen_helper_csrw(tcg_env, ssp_csr, addr);
+
+    return true;
+}
+
+static bool trans_ssrdp(DisasContext *ctx, arg_ssrdp *a)
+{
+    /* ssrdp only supported on 32bit and 64bit */
+    if (get_xl(ctx) != MXL_RV32 && get_xl(ctx) != MXL_RV64) {
+        return false;
+    }
+
+    /* back cfi was not enabled, return false */
+    if (!ctx->bcfi_enabled) {
+        return false;
+    }
+
+    TCGv dest = get_gpr(ctx, a->rd, EXT_NONE);
+    TCGv_i32 ssp_csr = tcg_constant_i32(CSR_SSP);
+    gen_helper_csrr(dest, tcg_env, ssp_csr);
+    gen_set_gpr(ctx, a->rd, dest);
+
+    return true;
+}
diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index b0526f5d79..de375c32a1 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -1142,6 +1142,7 @@ static uint32_t opcode_at(DisasContextBase *dcbase, target_ulong pc)
 #include "insn_trans/trans_rvzawrs.c.inc"
 #include "insn_trans/trans_rvzicbo.c.inc"
 #include "insn_trans/trans_rvzimop.c.inc"
+#include "insn_trans/trans_rvzicfiss.c.inc"
 #include "insn_trans/trans_rvzfa.c.inc"
 #include "insn_trans/trans_rvzfh.c.inc"
 #include "insn_trans/trans_rvk.c.inc"
-- 
2.44.0



  parent reply	other threads:[~2024-08-07  0:09 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-07  0:06 [PATCH v3 00/20] riscv support for control flow integrity extensions Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 01/20] accel/tcg: restrict assert on icount_enabled to qemu-system Deepak Gupta
2024-08-07  0:48   ` Richard Henderson
2024-08-07 18:45     ` Deepak Gupta
2024-08-12 17:41     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 02/20] target/riscv: Add zicfilp extension Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 03/20] target/riscv: Introduce elp state and enabling controls for zicfilp Deepak Gupta
2024-08-07  0:56   ` Richard Henderson
2024-08-07 18:46     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 04/20] target/riscv: save and restore elp state on priv transitions Deepak Gupta
2024-08-07  1:06   ` Richard Henderson
2024-08-07 20:11     ` Deepak Gupta
2024-08-07 22:40       ` Richard Henderson
2024-08-07 22:58         ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 05/20] target/riscv: additional code information for sw check Deepak Gupta
2024-08-07  1:11   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 06/20] target/riscv: tracking indirect branches (fcfi) for zicfilp Deepak Gupta
2024-08-07  1:23   ` Richard Henderson
2024-08-07 20:15     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 07/20] target/riscv: zicfilp `lpad` impl and branch tracking Deepak Gupta
2024-08-07  2:01   ` Richard Henderson
2024-08-07  2:04   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 08/20] disas/riscv: enabled `lpad` disassembly Deepak Gupta
2024-08-07  2:06   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 09/20] target/riscv: Add zicfiss extension Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 10/20] target/riscv: introduce ssp and enabling controls for zicfiss Deepak Gupta
2024-08-07  2:11   ` Richard Henderson
2024-08-07  2:12     ` Richard Henderson
2024-08-07 20:21       ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 11/20] target/riscv: tb flag for shadow stack instructions Deepak Gupta
2024-08-07  2:13   ` Richard Henderson
2024-08-07  0:06 ` Deepak Gupta [this message]
2024-08-07  2:39   ` [PATCH v3 12/20] target/riscv: implement zicfiss instructions Richard Henderson
2024-08-07  2:56     ` Richard Henderson
2024-08-07 21:25       ` Deepak Gupta
2024-08-07 20:35     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 13/20] target/riscv: compressed encodings for sspush and sspopchk Deepak Gupta
2024-08-07  2:40   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 14/20] target/riscv: mmu changes for zicfiss shadow stack protection Deepak Gupta
2024-08-07  3:19   ` Richard Henderson
2024-08-09 18:55     ` Deepak Gupta
2024-08-11 22:23       ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 15/20] target/riscv: shadow stack mmu index for shadow stack instructions Deepak Gupta
2024-08-07  2:43   ` Richard Henderson
2024-08-07 21:23     ` Deepak Gupta
2024-08-07 22:57       ` Richard Henderson
2024-08-07 23:13         ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 16/20] disas/riscv: enable disassembly for zicfiss instructions Deepak Gupta
2024-08-07  3:24   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 17/20] disas/riscv: enable disassembly for compressed sspush/sspopchk Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 18/20] target/riscv: add trace-hooks for each case of sw-check exception Deepak Gupta
2024-08-07  3:27   ` Richard Henderson
2024-08-07 20:52     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 19/20] linux-user: permit RISC-V CFI dynamic entry in VDSO Deepak Gupta
2024-08-07  3:36   ` Richard Henderson
2024-08-07 20:53     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 20/20] linux-user: Add RISC-V zicfilp support " Deepak Gupta
2024-08-07  3:41   ` Richard Henderson
2024-08-07 21:00     ` Deepak Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240807000652.1417776-13-debug@rivosinc.com \
    --to=debug@rivosinc.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=andy.chiu@sifive.com \
    --cc=bmeng.cn@gmail.com \
    --cc=dbarboza@ventanamicro.com \
    --cc=jim.shu@sifive.com \
    --cc=laurent@vivier.eu \
    --cc=liwei1518@gmail.com \
    --cc=palmer@dabbelt.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=zhiwei_liu@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.