All of lore.kernel.org
 help / color / mirror / Atom feed
From: Deepak Gupta <debug@rivosinc.com>
To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: richard.henderson@linaro.org, pbonzini@redhat.com,
	palmer@dabbelt.com, Alistair.Francis@wdc.com, laurent@vivier.eu,
	bmeng.cn@gmail.com, liwei1518@gmail.com,
	dbarboza@ventanamicro.com, zhiwei_liu@linux.alibaba.com,
	Deepak Gupta <debug@rivosinc.com>, Jim Shu <jim.shu@sifive.com>,
	Andy Chiu <andy.chiu@sifive.com>
Subject: [PATCH v3 03/20] target/riscv: Introduce elp state and enabling controls for zicfilp
Date: Tue,  6 Aug 2024 17:06:34 -0700	[thread overview]
Message-ID: <20240807000652.1417776-4-debug@rivosinc.com> (raw)
In-Reply-To: <20240807000652.1417776-1-debug@rivosinc.com>

zicfilp introduces a new state elp ("expected landing pad") in cpu.
During normal execution, elp is idle (NO_LP_EXPECTED) i.e not expecting
landing pad. On an indirect call, elp moves LP_EXPECTED. When elp is
LP_EXPECTED, only a subsquent landing pad instruction can set state back
to NO_LP_EXPECTED. On reset, elp is set to NO_LP_EXPECTED.

zicfilp is enabled via bit2 in *envcfg CSRs. Enabling control for M-mode
is in mseccfg CSR at bit position 10.

On trap, elp state is saved away in *status.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
---
 target/riscv/cpu.c      |  3 +++
 target/riscv/cpu.h      |  2 ++
 target/riscv/cpu_bits.h | 12 ++++++++++++
 target/riscv/csr.c      | 31 +++++++++++++++++++++++++++++++
 target/riscv/pmp.c      |  5 +++++
 target/riscv/pmp.h      |  3 ++-
 6 files changed, 55 insertions(+), 1 deletion(-)

diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 5dfb3f39ab..82fa85a8d6 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -994,6 +994,9 @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type)
     /* mmte is supposed to have pm.current hardwired to 1 */
     env->mmte |= (EXT_STATUS_INITIAL | MMTE_M_PM_CURRENT);
 
+    /* on reset elp is set to NO_LP_EXPECTED */
+    env->elp = NO_LP_EXPECTED;
+
     /*
      * Bits 10, 6, 2 and 12 of mideleg are read only 1 when the Hypervisor
      * extension is enabled.
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 87742047ce..ae436a3179 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -222,6 +222,8 @@ struct CPUArchState {
 
     target_ulong jvt;
 
+    /* elp state for zicfilp extension */
+    cfi_elp      elp;
 #ifdef CONFIG_USER_ONLY
     uint32_t elf_flags;
 #endif
diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h
index c257c5ed7d..127f2179dc 100644
--- a/target/riscv/cpu_bits.h
+++ b/target/riscv/cpu_bits.h
@@ -545,6 +545,8 @@
 #define MSTATUS_TVM         0x00100000 /* since: priv-1.10 */
 #define MSTATUS_TW          0x00200000 /* since: priv-1.10 */
 #define MSTATUS_TSR         0x00400000 /* since: priv-1.10 */
+#define MSTATUS_SPELP       0x00800000 /* zicfilp */
+#define MSTATUS_MPELP       0x020000000000 /* zicfilp */
 #define MSTATUS_GVA         0x4000000000ULL
 #define MSTATUS_MPV         0x8000000000ULL
 
@@ -575,12 +577,19 @@ typedef enum {
 #define SSTATUS_XS          0x00018000
 #define SSTATUS_SUM         0x00040000 /* since: priv-1.10 */
 #define SSTATUS_MXR         0x00080000
+#define SSTATUS_SPELP       MSTATUS_SPELP   /* zicfilp */
 
 #define SSTATUS64_UXL       0x0000000300000000ULL
 
 #define SSTATUS32_SD        0x80000000
 #define SSTATUS64_SD        0x8000000000000000ULL
 
+/* enum for branch tracking state in cpu/hart */
+typedef enum {
+    NO_LP_EXPECTED = 0,
+    LP_EXPECTED = 1,
+} cfi_elp;
+
 /* hstatus CSR bits */
 #define HSTATUS_VSBE         0x00000020
 #define HSTATUS_GVA          0x00000040
@@ -747,6 +756,7 @@ typedef enum RISCVException {
 
 /* Execution environment configuration bits */
 #define MENVCFG_FIOM                       BIT(0)
+#define MENVCFG_LPE                        BIT(2) /* zicfilp */
 #define MENVCFG_CBIE                       (3UL << 4)
 #define MENVCFG_CBCFE                      BIT(6)
 #define MENVCFG_CBZE                       BIT(7)
@@ -760,11 +770,13 @@ typedef enum RISCVException {
 #define MENVCFGH_STCE                      BIT(31)
 
 #define SENVCFG_FIOM                       MENVCFG_FIOM
+#define SENVCFG_LPE                        MENVCFG_LPE
 #define SENVCFG_CBIE                       MENVCFG_CBIE
 #define SENVCFG_CBCFE                      MENVCFG_CBCFE
 #define SENVCFG_CBZE                       MENVCFG_CBZE
 
 #define HENVCFG_FIOM                       MENVCFG_FIOM
+#define HENVCFG_LPE                        MENVCFG_LPE
 #define HENVCFG_CBIE                       MENVCFG_CBIE
 #define HENVCFG_CBCFE                      MENVCFG_CBCFE
 #define HENVCFG_CBZE                       MENVCFG_CBZE
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index 432c59dc66..5771a14848 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -1400,6 +1400,11 @@ static RISCVException write_mstatus(CPURISCVState *env, int csrno,
         }
     }
 
+    /* If cfi lp extension is available, then apply cfi lp mask */
+    if (env_archcpu(env)->cfg.ext_zicfilp) {
+        mask |= (MSTATUS_MPELP | MSTATUS_SPELP);
+    }
+
     mstatus = (mstatus & ~mask) | (val & mask);
 
     env->mstatus = mstatus;
@@ -2101,6 +2106,10 @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno,
         mask |= (cfg->ext_svpbmt ? MENVCFG_PBMTE : 0) |
                 (cfg->ext_sstc ? MENVCFG_STCE : 0) |
                 (cfg->ext_svadu ? MENVCFG_ADUE : 0);
+
+        if (env_archcpu(env)->cfg.ext_zicfilp) {
+            mask |= MENVCFG_LPE;
+        }
     }
     env->menvcfg = (env->menvcfg & ~mask) | (val & mask);
 
@@ -2153,6 +2162,10 @@ static RISCVException write_senvcfg(CPURISCVState *env, int csrno,
         return ret;
     }
 
+    if (env_archcpu(env)->cfg.ext_zicfilp) {
+        mask |= SENVCFG_LPE;
+    }
+
     env->senvcfg = (env->senvcfg & ~mask) | (val & mask);
     return RISCV_EXCP_NONE;
 }
@@ -2190,6 +2203,10 @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno,
 
     if (riscv_cpu_mxl(env) == MXL_RV64) {
         mask |= env->menvcfg & (HENVCFG_PBMTE | HENVCFG_STCE | HENVCFG_ADUE);
+
+        if (env_archcpu(env)->cfg.ext_zicfilp) {
+            mask |= HENVCFG_LPE;
+        }
     }
 
     env->henvcfg = (env->henvcfg & ~mask) | (val & mask);
@@ -2654,6 +2671,10 @@ static RISCVException read_sstatus_i128(CPURISCVState *env, int csrno,
         mask |= SSTATUS64_UXL;
     }
 
+    if (env_archcpu(env)->cfg.ext_zicfilp) {
+        mask |= SSTATUS_SPELP;
+    }
+
     *val = int128_make128(sstatus, add_status_sd(MXL_RV128, sstatus));
     return RISCV_EXCP_NONE;
 }
@@ -2665,6 +2686,11 @@ static RISCVException read_sstatus(CPURISCVState *env, int csrno,
     if (env->xl != MXL_RV32 || env->debugger) {
         mask |= SSTATUS64_UXL;
     }
+
+    if (env_archcpu(env)->cfg.ext_zicfilp) {
+        mask |= SSTATUS_SPELP;
+    }
+
     /* TODO: Use SXL not MXL. */
     *val = add_status_sd(riscv_cpu_mxl(env), env->mstatus & mask);
     return RISCV_EXCP_NONE;
@@ -2680,6 +2706,11 @@ static RISCVException write_sstatus(CPURISCVState *env, int csrno,
             mask |= SSTATUS64_UXL;
         }
     }
+
+    if (env_archcpu(env)->cfg.ext_zicfilp) {
+        mask |= SSTATUS_SPELP;
+    }
+
     target_ulong newval = (env->mstatus & ~mask) | (val & mask);
     return write_mstatus(env, CSR_MSTATUS, newval);
 }
diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c
index 9eea397e72..1111d08d08 100644
--- a/target/riscv/pmp.c
+++ b/target/riscv/pmp.c
@@ -598,6 +598,11 @@ void mseccfg_csr_write(CPURISCVState *env, target_ulong val)
         val &= ~(MSECCFG_MMWP | MSECCFG_MML | MSECCFG_RLB);
     }
 
+    /* M-mode forward cfi to be enabled if cfi extension is implemented */
+    if (env_archcpu(env)->cfg.ext_zicfilp) {
+        val |= (val & MSECCFG_MLPE);
+    }
+
     env->mseccfg = val;
 }
 
diff --git a/target/riscv/pmp.h b/target/riscv/pmp.h
index f5c10ce85c..e0530a17a3 100644
--- a/target/riscv/pmp.h
+++ b/target/riscv/pmp.h
@@ -44,7 +44,8 @@ typedef enum {
     MSECCFG_MMWP  = 1 << 1,
     MSECCFG_RLB   = 1 << 2,
     MSECCFG_USEED = 1 << 8,
-    MSECCFG_SSEED = 1 << 9
+    MSECCFG_SSEED = 1 << 9,
+    MSECCFG_MLPE =  1 << 10,
 } mseccfg_field_t;
 
 typedef struct {
-- 
2.44.0



  parent reply	other threads:[~2024-08-07  0:10 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-07  0:06 [PATCH v3 00/20] riscv support for control flow integrity extensions Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 01/20] accel/tcg: restrict assert on icount_enabled to qemu-system Deepak Gupta
2024-08-07  0:48   ` Richard Henderson
2024-08-07 18:45     ` Deepak Gupta
2024-08-12 17:41     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 02/20] target/riscv: Add zicfilp extension Deepak Gupta
2024-08-07  0:06 ` Deepak Gupta [this message]
2024-08-07  0:56   ` [PATCH v3 03/20] target/riscv: Introduce elp state and enabling controls for zicfilp Richard Henderson
2024-08-07 18:46     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 04/20] target/riscv: save and restore elp state on priv transitions Deepak Gupta
2024-08-07  1:06   ` Richard Henderson
2024-08-07 20:11     ` Deepak Gupta
2024-08-07 22:40       ` Richard Henderson
2024-08-07 22:58         ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 05/20] target/riscv: additional code information for sw check Deepak Gupta
2024-08-07  1:11   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 06/20] target/riscv: tracking indirect branches (fcfi) for zicfilp Deepak Gupta
2024-08-07  1:23   ` Richard Henderson
2024-08-07 20:15     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 07/20] target/riscv: zicfilp `lpad` impl and branch tracking Deepak Gupta
2024-08-07  2:01   ` Richard Henderson
2024-08-07  2:04   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 08/20] disas/riscv: enabled `lpad` disassembly Deepak Gupta
2024-08-07  2:06   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 09/20] target/riscv: Add zicfiss extension Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 10/20] target/riscv: introduce ssp and enabling controls for zicfiss Deepak Gupta
2024-08-07  2:11   ` Richard Henderson
2024-08-07  2:12     ` Richard Henderson
2024-08-07 20:21       ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 11/20] target/riscv: tb flag for shadow stack instructions Deepak Gupta
2024-08-07  2:13   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 12/20] target/riscv: implement zicfiss instructions Deepak Gupta
2024-08-07  2:39   ` Richard Henderson
2024-08-07  2:56     ` Richard Henderson
2024-08-07 21:25       ` Deepak Gupta
2024-08-07 20:35     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 13/20] target/riscv: compressed encodings for sspush and sspopchk Deepak Gupta
2024-08-07  2:40   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 14/20] target/riscv: mmu changes for zicfiss shadow stack protection Deepak Gupta
2024-08-07  3:19   ` Richard Henderson
2024-08-09 18:55     ` Deepak Gupta
2024-08-11 22:23       ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 15/20] target/riscv: shadow stack mmu index for shadow stack instructions Deepak Gupta
2024-08-07  2:43   ` Richard Henderson
2024-08-07 21:23     ` Deepak Gupta
2024-08-07 22:57       ` Richard Henderson
2024-08-07 23:13         ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 16/20] disas/riscv: enable disassembly for zicfiss instructions Deepak Gupta
2024-08-07  3:24   ` Richard Henderson
2024-08-07  0:06 ` [PATCH v3 17/20] disas/riscv: enable disassembly for compressed sspush/sspopchk Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 18/20] target/riscv: add trace-hooks for each case of sw-check exception Deepak Gupta
2024-08-07  3:27   ` Richard Henderson
2024-08-07 20:52     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 19/20] linux-user: permit RISC-V CFI dynamic entry in VDSO Deepak Gupta
2024-08-07  3:36   ` Richard Henderson
2024-08-07 20:53     ` Deepak Gupta
2024-08-07  0:06 ` [PATCH v3 20/20] linux-user: Add RISC-V zicfilp support " Deepak Gupta
2024-08-07  3:41   ` Richard Henderson
2024-08-07 21:00     ` Deepak Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240807000652.1417776-4-debug@rivosinc.com \
    --to=debug@rivosinc.com \
    --cc=Alistair.Francis@wdc.com \
    --cc=andy.chiu@sifive.com \
    --cc=bmeng.cn@gmail.com \
    --cc=dbarboza@ventanamicro.com \
    --cc=jim.shu@sifive.com \
    --cc=laurent@vivier.eu \
    --cc=liwei1518@gmail.com \
    --cc=palmer@dabbelt.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=zhiwei_liu@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.