From: Deepak Gupta <debug@rivosinc.com>
To: qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Cc: richard.henderson@linaro.org, pbonzini@redhat.com,
palmer@dabbelt.com, Alistair.Francis@wdc.com, laurent@vivier.eu,
bmeng.cn@gmail.com, liwei1518@gmail.com,
dbarboza@ventanamicro.com, zhiwei_liu@linux.alibaba.com,
Deepak Gupta <debug@rivosinc.com>, Jim Shu <jim.shu@sifive.com>,
Andy Chiu <andy.chiu@sifive.com>
Subject: [PATCH v3 04/20] target/riscv: save and restore elp state on priv transitions
Date: Tue, 6 Aug 2024 17:06:35 -0700 [thread overview]
Message-ID: <20240807000652.1417776-5-debug@rivosinc.com> (raw)
In-Reply-To: <20240807000652.1417776-1-debug@rivosinc.com>
elp state is recorded in *status on trap entry (less privilege to higher
privilege) and restored in elp from *status on trap exit (higher to less
privilege).
Additionally this patch introduces a forward cfi helper function to
determine if current privilege has forward cfi is enabled or not based on
*envcfg (for U, VU, S, VU, HS) or mseccfg csr (for M). For qemu-user, a
new field `ufcfien` is introduced which is by default set to false and
helper function returns value deposited in `ufcfien` for qemu-user.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
---
target/riscv/cpu.c | 5 ++++
target/riscv/cpu.h | 2 ++
target/riscv/cpu_helper.c | 58 +++++++++++++++++++++++++++++++++++++++
target/riscv/op_helper.c | 18 ++++++++++++
4 files changed, 83 insertions(+)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 82fa85a8d6..e1526c7ab5 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -1022,6 +1022,11 @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type)
env->load_res = -1;
set_default_nan_mode(1, &env->fp_status);
+#ifdef CONFIG_USER_ONLY
+ /* qemu-user for riscv, fcfi is off by default */
+ env->ufcfien = false;
+#endif
+
#ifndef CONFIG_USER_ONLY
if (cpu->cfg.debug) {
riscv_trigger_reset_hold(env);
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index ae436a3179..8c7841fc08 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -226,6 +226,7 @@ struct CPUArchState {
cfi_elp elp;
#ifdef CONFIG_USER_ONLY
uint32_t elf_flags;
+ bool ufcfien;
#endif
#ifndef CONFIG_USER_ONLY
@@ -530,6 +531,7 @@ void riscv_cpu_set_geilen(CPURISCVState *env, target_ulong geilen);
bool riscv_cpu_vector_enabled(CPURISCVState *env);
void riscv_cpu_set_virt_enabled(CPURISCVState *env, bool enable);
int riscv_env_mmu_index(CPURISCVState *env, bool ifetch);
+bool cpu_get_fcfien(CPURISCVState *env);
G_NORETURN void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
MMUAccessType access_type,
int mmu_idx, uintptr_t retaddr);
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index 6709622dd3..8c69c55576 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -33,6 +33,7 @@
#include "cpu_bits.h"
#include "debug.h"
#include "tcg/oversized-guest.h"
+#include "pmp.h"
int riscv_env_mmu_index(CPURISCVState *env, bool ifetch)
{
@@ -63,6 +64,35 @@ int riscv_env_mmu_index(CPURISCVState *env, bool ifetch)
#endif
}
+bool cpu_get_fcfien(CPURISCVState *env)
+{
+#ifdef CONFIG_USER_ONLY
+ return env->ufcfien;
+#else
+ /* no cfi extension, return false */
+ if (!env_archcpu(env)->cfg.ext_zicfilp) {
+ return false;
+ }
+
+ switch (env->priv) {
+ case PRV_U:
+ if (riscv_has_ext(env, RVS)) {
+ return env->senvcfg & MENVCFG_LPE;
+ }
+ return env->menvcfg & MENVCFG_LPE;
+ case PRV_S:
+ if (env->virt_enabled) {
+ return env->henvcfg & HENVCFG_LPE;
+ }
+ return env->menvcfg & MENVCFG_LPE;
+ case PRV_M:
+ return env->mseccfg & MSECCFG_MLPE;
+ default:
+ g_assert_not_reached();
+ }
+#endif
+}
+
void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc,
uint64_t *cs_base, uint32_t *pflags)
{
@@ -546,6 +576,15 @@ void riscv_cpu_swap_hypervisor_regs(CPURISCVState *env)
}
bool current_virt = env->virt_enabled;
+ /*
+ * If zicfilp extension available and henvcfg.LPE = 1,
+ * then apply SPELP mask on mstatus
+ */
+ if (env_archcpu(env)->cfg.ext_zicfilp &&
+ get_field(env->henvcfg, HENVCFG_LPE)) {
+ mstatus_mask |= SSTATUS_SPELP;
+ }
+
g_assert(riscv_has_ext(env, RVH));
if (current_virt) {
@@ -1754,6 +1793,11 @@ void riscv_cpu_do_interrupt(CPUState *cs)
if (env->priv <= PRV_S && cause < 64 &&
(((deleg >> cause) & 1) || s_injected || vs_injected)) {
/* handle the trap in S-mode */
+ /* save elp status */
+ if (cpu_get_fcfien(env)) {
+ env->mstatus = set_field(env->mstatus, MSTATUS_SPELP, env->elp);
+ }
+
if (riscv_has_ext(env, RVH)) {
uint64_t hdeleg = async ? env->hideleg : env->hedeleg;
@@ -1802,6 +1846,11 @@ void riscv_cpu_do_interrupt(CPUState *cs)
riscv_cpu_set_mode(env, PRV_S);
} else {
/* handle the trap in M-mode */
+ /* save elp status */
+ if (cpu_get_fcfien(env)) {
+ env->mstatus = set_field(env->mstatus, MSTATUS_MPELP, env->elp);
+ }
+
if (riscv_has_ext(env, RVH)) {
if (env->virt_enabled) {
riscv_cpu_swap_hypervisor_regs(env);
@@ -1833,6 +1882,15 @@ void riscv_cpu_do_interrupt(CPUState *cs)
riscv_cpu_set_mode(env, PRV_M);
}
+ /*
+ * Interrupt/exception/trap delivery is asynchronous event and as per
+ * Zisslpcfi spec CPU should clear up the ELP state. If cfi extension is
+ * available, clear ELP state.
+ */
+
+ if (cpu->cfg.ext_zicfilp) {
+ env->elp = NO_LP_EXPECTED;
+ }
/*
* NOTE: it is not necessary to yield load reservations here. It is only
* necessary for an SC from "another hart" to cause a load reservation
diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c
index 2baf5bc3ca..488116cc2e 100644
--- a/target/riscv/op_helper.c
+++ b/target/riscv/op_helper.c
@@ -313,6 +313,15 @@ target_ulong helper_sret(CPURISCVState *env)
riscv_cpu_set_mode(env, prev_priv);
+ /*
+ * If forward cfi enabled for new priv, restore elp status
+ * and clear spelp in mstatus
+ */
+ if (cpu_get_fcfien(env)) {
+ env->elp = get_field(env->mstatus, MSTATUS_SPELP);
+ env->mstatus = set_field(env->mstatus, MSTATUS_SPELP, 0);
+ }
+
return retpc;
}
@@ -357,6 +366,15 @@ target_ulong helper_mret(CPURISCVState *env)
riscv_cpu_set_virt_enabled(env, prev_virt);
}
+ /*
+ * If forward cfi enabled for new priv, restore elp status
+ * and clear mpelp in mstatus
+ */
+ if (cpu_get_fcfien(env)) {
+ env->elp = get_field(env->mstatus, MSTATUS_MPELP);
+ env->mstatus = set_field(env->mstatus, MSTATUS_MPELP, 0);
+ }
+
return retpc;
}
--
2.44.0
next prev parent reply other threads:[~2024-08-07 0:11 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-07 0:06 [PATCH v3 00/20] riscv support for control flow integrity extensions Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 01/20] accel/tcg: restrict assert on icount_enabled to qemu-system Deepak Gupta
2024-08-07 0:48 ` Richard Henderson
2024-08-07 18:45 ` Deepak Gupta
2024-08-12 17:41 ` Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 02/20] target/riscv: Add zicfilp extension Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 03/20] target/riscv: Introduce elp state and enabling controls for zicfilp Deepak Gupta
2024-08-07 0:56 ` Richard Henderson
2024-08-07 18:46 ` Deepak Gupta
2024-08-07 0:06 ` Deepak Gupta [this message]
2024-08-07 1:06 ` [PATCH v3 04/20] target/riscv: save and restore elp state on priv transitions Richard Henderson
2024-08-07 20:11 ` Deepak Gupta
2024-08-07 22:40 ` Richard Henderson
2024-08-07 22:58 ` Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 05/20] target/riscv: additional code information for sw check Deepak Gupta
2024-08-07 1:11 ` Richard Henderson
2024-08-07 0:06 ` [PATCH v3 06/20] target/riscv: tracking indirect branches (fcfi) for zicfilp Deepak Gupta
2024-08-07 1:23 ` Richard Henderson
2024-08-07 20:15 ` Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 07/20] target/riscv: zicfilp `lpad` impl and branch tracking Deepak Gupta
2024-08-07 2:01 ` Richard Henderson
2024-08-07 2:04 ` Richard Henderson
2024-08-07 0:06 ` [PATCH v3 08/20] disas/riscv: enabled `lpad` disassembly Deepak Gupta
2024-08-07 2:06 ` Richard Henderson
2024-08-07 0:06 ` [PATCH v3 09/20] target/riscv: Add zicfiss extension Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 10/20] target/riscv: introduce ssp and enabling controls for zicfiss Deepak Gupta
2024-08-07 2:11 ` Richard Henderson
2024-08-07 2:12 ` Richard Henderson
2024-08-07 20:21 ` Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 11/20] target/riscv: tb flag for shadow stack instructions Deepak Gupta
2024-08-07 2:13 ` Richard Henderson
2024-08-07 0:06 ` [PATCH v3 12/20] target/riscv: implement zicfiss instructions Deepak Gupta
2024-08-07 2:39 ` Richard Henderson
2024-08-07 2:56 ` Richard Henderson
2024-08-07 21:25 ` Deepak Gupta
2024-08-07 20:35 ` Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 13/20] target/riscv: compressed encodings for sspush and sspopchk Deepak Gupta
2024-08-07 2:40 ` Richard Henderson
2024-08-07 0:06 ` [PATCH v3 14/20] target/riscv: mmu changes for zicfiss shadow stack protection Deepak Gupta
2024-08-07 3:19 ` Richard Henderson
2024-08-09 18:55 ` Deepak Gupta
2024-08-11 22:23 ` Richard Henderson
2024-08-07 0:06 ` [PATCH v3 15/20] target/riscv: shadow stack mmu index for shadow stack instructions Deepak Gupta
2024-08-07 2:43 ` Richard Henderson
2024-08-07 21:23 ` Deepak Gupta
2024-08-07 22:57 ` Richard Henderson
2024-08-07 23:13 ` Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 16/20] disas/riscv: enable disassembly for zicfiss instructions Deepak Gupta
2024-08-07 3:24 ` Richard Henderson
2024-08-07 0:06 ` [PATCH v3 17/20] disas/riscv: enable disassembly for compressed sspush/sspopchk Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 18/20] target/riscv: add trace-hooks for each case of sw-check exception Deepak Gupta
2024-08-07 3:27 ` Richard Henderson
2024-08-07 20:52 ` Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 19/20] linux-user: permit RISC-V CFI dynamic entry in VDSO Deepak Gupta
2024-08-07 3:36 ` Richard Henderson
2024-08-07 20:53 ` Deepak Gupta
2024-08-07 0:06 ` [PATCH v3 20/20] linux-user: Add RISC-V zicfilp support " Deepak Gupta
2024-08-07 3:41 ` Richard Henderson
2024-08-07 21:00 ` Deepak Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240807000652.1417776-5-debug@rivosinc.com \
--to=debug@rivosinc.com \
--cc=Alistair.Francis@wdc.com \
--cc=andy.chiu@sifive.com \
--cc=bmeng.cn@gmail.com \
--cc=dbarboza@ventanamicro.com \
--cc=jim.shu@sifive.com \
--cc=laurent@vivier.eu \
--cc=liwei1518@gmail.com \
--cc=palmer@dabbelt.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.