All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jamin Lin via <qemu-arm@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Steven Lee" <steven_lee@aspeedtech.com>,
	"Troy Lee" <leetroy@gmail.com>,
	"Andrew Jeffery" <andrew@codeconstruct.com.au>,
	"Joel Stanley" <joel@jms.id.au>,
	"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
	"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: <jamin_lin@aspeedtech.com>, <troy_lee@aspeedtech.com>
Subject: [PATCH v1 16/21] hw/misc/aspeed_scu: Add SCU support for TSP SDRAM remap
Date: Thu, 17 Jul 2025 11:40:44 +0800	[thread overview]
Message-ID: <20250717034054.1903991-17-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20250717034054.1903991-1-jamin_lin@aspeedtech.com>

This commit adds SCU register support for TSP SDRAM remap control and runtime
activation. Unlike SSP, the TSP does not support configurable target address remapping
through SCU registers. It only supports setting the PSP DRAM base and size, which
are then aliased into the TSP-visible SDRAM window.

One MemoryRegion alias is attached to the SCU via QOM property link:
    - tsp-sdram-remap: maps PSP DRAM at 0x42E000000 (size: 32MB) to TSP SDRAM
      offset 0x0

The SCU registers AST2700_SCU_TSP_CTRL_1 and
AST2700_SCU_TSP_REMAP_SIZE_2 allow runtime reconfiguration of the DRAM base (alias offset)
and mapping size.

|------------------------------------------|         |----------------------------|
|               PSP DRAM                   |         |        TSP SDRAM           |
|------------------------------------------|         |----------------------------|
| 0x42E0_0000_0 (SCU_168 << 4)             |         | 0x0000_0000                |
|   remap base                             |------>  |  - fixed target addr       |
|   size: 32MB    (SCU_194)                |         |                            |
|------------------------------------------|         |----------------------------|

SCU VMState version remains at 3, as it was already bumped in a previous commit.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 include/hw/misc/aspeed_scu.h |  1 +
 hw/arm/aspeed_ast27x0.c      |  3 +++
 hw/misc/aspeed_scu.c         | 24 +++++++++++++++++++++++-
 3 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h
index 408f821379..5e7c80feb1 100644
--- a/include/hw/misc/aspeed_scu.h
+++ b/include/hw/misc/aspeed_scu.h
@@ -42,6 +42,7 @@ struct AspeedSCUState {
 
     MemoryRegion *ssp_sdram_remap1;
     MemoryRegion *ssp_sdram_remap2;
+    MemoryRegion *tsp_sdram_remap;
 };
 
 #define AST2400_A0_SILICON_REV   0x02000303U
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 587c042c30..23096bda34 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -839,6 +839,9 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
         object_property_set_link(OBJECT(&s->scu), "ssp-sdram-remap2",
                                  OBJECT(&a->ssp.sdram_remap2_alias),
                                  &error_abort);
+        object_property_set_link(OBJECT(&s->scu), "tsp-sdram-remap",
+                                 OBJECT(&a->tsp.sdram_remap_alias),
+                                 &error_abort);
     }
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
         return;
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index df379cafbe..21a0d1ad5c 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -143,13 +143,15 @@
 #define AST2700_HW_STRAP1_SEC2    TO_REG(0x28)
 #define AST2700_HW_STRAP1_SEC3    TO_REG(0x2C)
 
-/* SSP */
+/* SSP TSP */
 #define AST2700_SCU_SSP_CTRL_1          TO_REG(0x124)
 #define AST2700_SCU_SSP_CTRL_2          TO_REG(0x128)
 #define AST2700_SCU_SSP_REMAP_ADDR_1    TO_REG(0x148)
 #define AST2700_SCU_SSP_REMAP_SIZE_1    TO_REG(0x14c)
 #define AST2700_SCU_SSP_REMAP_ADDR_2    TO_REG(0x150)
 #define AST2700_SCU_SSP_REMAP_SIZE_2    TO_REG(0x154)
+#define AST2700_SCU_TSP_CTRL_1          TO_REG(0x168)
+#define AST2700_SCU_TSP_REMAP_SIZE_2    TO_REG(0x194)
 
 #define AST2700_SCU_CLK_SEL_1       TO_REG(0x280)
 #define AST2700_SCU_HPLL_PARAM      TO_REG(0x300)
@@ -630,6 +632,8 @@ static const Property aspeed_scu_properties[] = {
                      TYPE_MEMORY_REGION, MemoryRegion *),
     DEFINE_PROP_LINK("ssp-sdram-remap2", AspeedSCUState, ssp_sdram_remap2,
                      TYPE_MEMORY_REGION, MemoryRegion *),
+    DEFINE_PROP_LINK("tsp-sdram-remap", AspeedSCUState, tsp_sdram_remap,
+                     TYPE_MEMORY_REGION, MemoryRegion *),
 };
 
 static void aspeed_scu_class_init(ObjectClass *klass, const void *data)
@@ -956,6 +960,22 @@ static void aspeed_ast2700_scu_write(void *opaque, hwaddr offset,
         data &= 0x3fffffff;
         memory_region_set_size(mr, data);
         break;
+    case AST2700_SCU_TSP_CTRL_1:
+        if (s->tsp_sdram_remap == NULL) {
+            return;
+        }
+        data &= 0x7fffffff;
+        /* remapped to SOC DRAM by adding data << 4 */
+        memory_region_set_alias_offset(s->tsp_sdram_remap,
+                                       (uint64_t) data << 4);
+        break;
+    case AST2700_SCU_TSP_REMAP_SIZE_2:
+        if (s->tsp_sdram_remap == NULL) {
+            return;
+        }
+        data &= 0x3fffffff;
+        memory_region_set_size(s->tsp_sdram_remap, data);
+        break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Unhandled write at offset 0x%" HWADDR_PRIx "\n",
@@ -989,6 +1009,8 @@ static const uint32_t ast2700_a0_resets[ASPEED_AST2700_SCU_NR_REGS] = {
     [AST2700_SCU_SSP_REMAP_SIZE_1]  = 0x02000000,
     [AST2700_SCU_SSP_REMAP_ADDR_2]  = 0x00000000,
     [AST2700_SCU_SSP_REMAP_SIZE_2]  = 0x02000000,
+    [AST2700_SCU_TSP_CTRL_1]        = 0x42E00000,
+    [AST2700_SCU_TSP_REMAP_SIZE_2]  = 0x02000000,
     [AST2700_SCU_HPLL_PARAM]        = 0x0000009f,
     [AST2700_SCU_HPLL_EXT_PARAM]    = 0x8000004f,
     [AST2700_SCU_DPLL_PARAM]        = 0x0080009f,
-- 
2.43.0



WARNING: multiple messages have this Message-ID (diff)
From: Jamin Lin via <qemu-devel@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
	"Peter Maydell" <peter.maydell@linaro.org>,
	"Steven Lee" <steven_lee@aspeedtech.com>,
	"Troy Lee" <leetroy@gmail.com>,
	"Andrew Jeffery" <andrew@codeconstruct.com.au>,
	"Joel Stanley" <joel@jms.id.au>,
	"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
	"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: <jamin_lin@aspeedtech.com>, <troy_lee@aspeedtech.com>
Subject: [PATCH v1 16/21] hw/misc/aspeed_scu: Add SCU support for TSP SDRAM remap
Date: Thu, 17 Jul 2025 11:40:44 +0800	[thread overview]
Message-ID: <20250717034054.1903991-17-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20250717034054.1903991-1-jamin_lin@aspeedtech.com>

This commit adds SCU register support for TSP SDRAM remap control and runtime
activation. Unlike SSP, the TSP does not support configurable target address remapping
through SCU registers. It only supports setting the PSP DRAM base and size, which
are then aliased into the TSP-visible SDRAM window.

One MemoryRegion alias is attached to the SCU via QOM property link:
    - tsp-sdram-remap: maps PSP DRAM at 0x42E000000 (size: 32MB) to TSP SDRAM
      offset 0x0

The SCU registers AST2700_SCU_TSP_CTRL_1 and
AST2700_SCU_TSP_REMAP_SIZE_2 allow runtime reconfiguration of the DRAM base (alias offset)
and mapping size.

|------------------------------------------|         |----------------------------|
|               PSP DRAM                   |         |        TSP SDRAM           |
|------------------------------------------|         |----------------------------|
| 0x42E0_0000_0 (SCU_168 << 4)             |         | 0x0000_0000                |
|   remap base                             |------>  |  - fixed target addr       |
|   size: 32MB    (SCU_194)                |         |                            |
|------------------------------------------|         |----------------------------|

SCU VMState version remains at 3, as it was already bumped in a previous commit.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 include/hw/misc/aspeed_scu.h |  1 +
 hw/arm/aspeed_ast27x0.c      |  3 +++
 hw/misc/aspeed_scu.c         | 24 +++++++++++++++++++++++-
 3 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h
index 408f821379..5e7c80feb1 100644
--- a/include/hw/misc/aspeed_scu.h
+++ b/include/hw/misc/aspeed_scu.h
@@ -42,6 +42,7 @@ struct AspeedSCUState {
 
     MemoryRegion *ssp_sdram_remap1;
     MemoryRegion *ssp_sdram_remap2;
+    MemoryRegion *tsp_sdram_remap;
 };
 
 #define AST2400_A0_SILICON_REV   0x02000303U
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 587c042c30..23096bda34 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -839,6 +839,9 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
         object_property_set_link(OBJECT(&s->scu), "ssp-sdram-remap2",
                                  OBJECT(&a->ssp.sdram_remap2_alias),
                                  &error_abort);
+        object_property_set_link(OBJECT(&s->scu), "tsp-sdram-remap",
+                                 OBJECT(&a->tsp.sdram_remap_alias),
+                                 &error_abort);
     }
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
         return;
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index df379cafbe..21a0d1ad5c 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -143,13 +143,15 @@
 #define AST2700_HW_STRAP1_SEC2    TO_REG(0x28)
 #define AST2700_HW_STRAP1_SEC3    TO_REG(0x2C)
 
-/* SSP */
+/* SSP TSP */
 #define AST2700_SCU_SSP_CTRL_1          TO_REG(0x124)
 #define AST2700_SCU_SSP_CTRL_2          TO_REG(0x128)
 #define AST2700_SCU_SSP_REMAP_ADDR_1    TO_REG(0x148)
 #define AST2700_SCU_SSP_REMAP_SIZE_1    TO_REG(0x14c)
 #define AST2700_SCU_SSP_REMAP_ADDR_2    TO_REG(0x150)
 #define AST2700_SCU_SSP_REMAP_SIZE_2    TO_REG(0x154)
+#define AST2700_SCU_TSP_CTRL_1          TO_REG(0x168)
+#define AST2700_SCU_TSP_REMAP_SIZE_2    TO_REG(0x194)
 
 #define AST2700_SCU_CLK_SEL_1       TO_REG(0x280)
 #define AST2700_SCU_HPLL_PARAM      TO_REG(0x300)
@@ -630,6 +632,8 @@ static const Property aspeed_scu_properties[] = {
                      TYPE_MEMORY_REGION, MemoryRegion *),
     DEFINE_PROP_LINK("ssp-sdram-remap2", AspeedSCUState, ssp_sdram_remap2,
                      TYPE_MEMORY_REGION, MemoryRegion *),
+    DEFINE_PROP_LINK("tsp-sdram-remap", AspeedSCUState, tsp_sdram_remap,
+                     TYPE_MEMORY_REGION, MemoryRegion *),
 };
 
 static void aspeed_scu_class_init(ObjectClass *klass, const void *data)
@@ -956,6 +960,22 @@ static void aspeed_ast2700_scu_write(void *opaque, hwaddr offset,
         data &= 0x3fffffff;
         memory_region_set_size(mr, data);
         break;
+    case AST2700_SCU_TSP_CTRL_1:
+        if (s->tsp_sdram_remap == NULL) {
+            return;
+        }
+        data &= 0x7fffffff;
+        /* remapped to SOC DRAM by adding data << 4 */
+        memory_region_set_alias_offset(s->tsp_sdram_remap,
+                                       (uint64_t) data << 4);
+        break;
+    case AST2700_SCU_TSP_REMAP_SIZE_2:
+        if (s->tsp_sdram_remap == NULL) {
+            return;
+        }
+        data &= 0x3fffffff;
+        memory_region_set_size(s->tsp_sdram_remap, data);
+        break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Unhandled write at offset 0x%" HWADDR_PRIx "\n",
@@ -989,6 +1009,8 @@ static const uint32_t ast2700_a0_resets[ASPEED_AST2700_SCU_NR_REGS] = {
     [AST2700_SCU_SSP_REMAP_SIZE_1]  = 0x02000000,
     [AST2700_SCU_SSP_REMAP_ADDR_2]  = 0x00000000,
     [AST2700_SCU_SSP_REMAP_SIZE_2]  = 0x02000000,
+    [AST2700_SCU_TSP_CTRL_1]        = 0x42E00000,
+    [AST2700_SCU_TSP_REMAP_SIZE_2]  = 0x02000000,
     [AST2700_SCU_HPLL_PARAM]        = 0x0000009f,
     [AST2700_SCU_HPLL_EXT_PARAM]    = 0x8000004f,
     [AST2700_SCU_DPLL_PARAM]        = 0x0080009f,
-- 
2.43.0



  parent reply	other threads:[~2025-07-17  3:45 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-17  3:40 [PATCH v1 00/21] Control coprocessor reset for AST2700 Jamin Lin via
2025-07-17  3:40 ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 01/21] hw/arm/aspeed_ast27x0-fc: Support VBootRom Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-09-02  6:01   ` [SPAM] " Cédric Le Goater
2025-09-02  8:28     ` Jamin Lin
2025-09-02 13:23       ` Cédric Le Goater
2025-09-03  5:19         ` Jamin Lin
2025-09-03  8:48           ` Jamin Lin
2025-07-17  3:40 ` [PATCH v1 02/21] hw/arm/ast27x0: Move SSP coprocessor initialization from machine to SoC leve Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-09-02  6:20   ` [SPAM] " Cédric Le Goater
2025-09-02  7:27     ` Markus Armbruster
2025-09-02  8:49       ` Jamin Lin
2025-09-02  9:39         ` Markus Armbruster
2025-09-02  8:41     ` Jamin Lin
2025-09-02 13:24       ` Cédric Le Goater
2025-07-17  3:40 ` [PATCH v1 03/21] hw/arm/ast27x0: Move TSP " Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 04/21] hw/arm/aspeed_ast27x0-ssp: Switch SSP memory to SDRAM and use dram_container for remap support Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-09-02  7:36   ` [SPAM] " Cédric Le Goater
2025-09-03  1:45     ` Jamin Lin
2025-07-17  3:40 ` [PATCH v1 05/21] hw/arm/aspeed_ast27x0-tsp: Switch TSP " Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 06/21] hw/arm/ast27x0: Add SRAM alias for SSP and ensure correct device realization order Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-09-02  7:47   ` [SPAM] " Cédric Le Goater
2025-09-03  1:48     ` Jamin Lin
2025-07-17  3:40 ` [PATCH v1 07/21] hw/arm/ast27x0: Add SRAM alias for TSP " Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 08/21] hw/arm/ast27x0: Add SCU alias for SSP " Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-09-02  8:09   ` [SPAM] " Cédric Le Goater
2025-09-23  8:31     ` Jamin Lin
2025-09-23 11:33       ` Cédric Le Goater
2025-09-24  6:03         ` Jamin Lin
2025-09-24 11:13           ` Cédric Le Goater
2025-09-25  2:32             ` Jamin Lin
2025-09-26  3:13               ` Jamin Lin
2025-09-26  7:44                 ` Cédric Le Goater
2025-07-17  3:40 ` [PATCH v1 09/21] hw/arm/ast27x0: Add SCU alias for TSP " Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 10/21] hw/arm/ast27x0: Move DRAM and SDMC initialization earlier to support memory aliasing Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-09-02  7:51   ` [SPAM] " Cédric Le Goater
2025-09-03  1:50     ` Jamin Lin
2025-07-17  3:40 ` [PATCH v1 11/21] hw/arm/ast27x0: Add DRAM alias for SSP SDRAM remap and update realization order Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 12/21] hw/arm/ast27x0: Add DRAM alias for TSP " Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 13/21] hw/arm/ast27x0: Start SSP in powered-off state to match hardware behavior Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 14/21] hw/arm/ast27x0: Start TSP " Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 15/21] hw/misc/aspeed_scu: Add SCU support for SSP SDRAM remap Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` Jamin Lin via [this message]
2025-07-17  3:40   ` [PATCH v1 16/21] hw/misc/aspeed_scu: Add SCU support for TSP " Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 17/21] hw/misc/aspeed_scu: Implement SSP reset and power-on control via SCU registers Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 18/21] hw/misc/aspeed_scu: Implement TSP " Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 19/21] pc-bios: Update AST27x0 vBootrom with SSP/TSP SCU initialization support Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-22 15:21   ` [SPAM] " Cédric Le Goater
2025-07-23  2:42     ` Jamin Lin
2025-07-27 19:51   ` Michael Tokarev
2025-07-28  6:49     ` Cédric Le Goater
2025-07-28  7:02       ` Jamin Lin via
2025-07-28  7:02         ` Jamin Lin via
2025-07-28  7:11         ` Cédric Le Goater
2025-07-28  7:11         ` Michael Tokarev
2025-07-28  7:41           ` Jamin Lin via
2025-07-28  7:41             ` Jamin Lin via
2025-07-29  9:12             ` Cédric Le Goater
2025-07-30  1:47               ` Jamin Lin via
2025-07-30  1:47                 ` Jamin Lin via
2025-07-30  4:59                 ` Cédric Le Goater
2025-07-28  8:32       ` Michael Tokarev
2025-07-28  8:40         ` Cédric Le Goater
2025-07-17  3:40 ` [PATCH v1 20/21] tests/function/aspeed: Replace manual loader with vbootrom for ast2700fc test Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  3:40 ` [PATCH v1 21/21] docs: Add support vbootrom for ast2700fc Jamin Lin via
2025-07-17  3:40   ` Jamin Lin via
2025-07-17  5:22 ` [PATCH v1 00/21] Control coprocessor reset for AST2700 Jamin Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250717034054.1903991-17-jamin_lin@aspeedtech.com \
    --to=qemu-arm@nongnu.org \
    --cc=andrew@codeconstruct.com.au \
    --cc=clg@kaod.org \
    --cc=jamin_lin@aspeedtech.com \
    --cc=joel@jms.id.au \
    --cc=leetroy@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=steven_lee@aspeedtech.com \
    --cc=troy_lee@aspeedtech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.