[PATCH v6 36/87] usb: dwc3: import from kernel v5.11

[Anders Roxell <anders.roxell@linaro.org>]

From: Jens Wiklander <jens.wiklander@linaro.org>

Sync Linux kernel dwc3 changes from v5.10 to v5.11.

The following files are preserved across the import:
Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
dwc3-layerscape.c ti_usb_phy.c

Skipping unused files:
debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c

Note that this is a raw import and doesn't build.
A fixup commit at the end of the series fixes that.

List of commits: git log --oneline v5.10..v5.11
Commits imported:
0e5a3c8284a3 usb: dwc3: fix clock issue during resume in OTG mode
a5c7682aaaa1 usb: dwc3: gadget: Clear wait flag on dequeue
a1383b3537a7 usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
ce722da66d3e usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completion

Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
---
 drivers/usb/dwc3/core.c   |  2 +-
 drivers/usb/dwc3/core.h   |  1 +
 drivers/usb/dwc3/gadget.c | 16 +++++-----------
 3 files changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 841daec70b6e..3101f0dcf6ae 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1758,7 +1758,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
 		if (PMSG_IS_AUTO(msg))
 			break;
 
-		ret = dwc3_core_init(dwc);
+		ret = dwc3_core_init_for_resume(dwc);
 		if (ret)
 			return ret;
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 2f95f08ca511..1b241f937d8f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -285,6 +285,7 @@
 
 /* Global USB2 PHY Vendor Control Register */
 #define DWC3_GUSB2PHYACC_NEWREGREQ	BIT(25)
+#define DWC3_GUSB2PHYACC_DONE		BIT(24)
 #define DWC3_GUSB2PHYACC_BUSY		BIT(23)
 #define DWC3_GUSB2PHYACC_WRITE		BIT(22)
 #define DWC3_GUSB2PHYACC_ADDR(n)	(n << 16)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 78cb4db8a6e4..ee44321fee38 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1763,6 +1763,8 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 			list_for_each_entry_safe(r, t, &dep->started_list, list)
 				dwc3_gadget_move_cancelled_request(r);
 
+			dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE;
+
 			goto out;
 		}
 	}
@@ -2083,6 +2085,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 
 static void dwc3_gadget_disable_irq(struct dwc3 *dwc);
 static void __dwc3_gadget_stop(struct dwc3 *dwc);
+static int __dwc3_gadget_start(struct dwc3 *dwc);
 
 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 {
@@ -2145,6 +2148,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
 			dwc->ev_buf->lpos = (dwc->ev_buf->lpos + count) %
 						dwc->ev_buf->length;
 		}
+	} else {
+		__dwc3_gadget_start(dwc);
 	}
 
 	ret = dwc3_gadget_run_stop(dwc, is_on, false);
@@ -2319,10 +2324,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	}
 
 	dwc->gadget_driver	= driver;
-
-	if (pm_runtime_active(dwc->dev))
-		__dwc3_gadget_start(dwc);
-
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return 0;
@@ -2348,13 +2349,6 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
 	unsigned long		flags;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-
-	if (pm_runtime_suspended(dwc->dev))
-		goto out;
-
-	__dwc3_gadget_stop(dwc);
-
-out:
 	dwc->gadget_driver	= NULL;
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
-- 
2.53.0