From: Jisheng Zhang <jszhang@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Andi Shyti <andi.shyti@kernel.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Frank Li <Frank.Li@nxp.com>, Lee Jones <lee@kernel.org>,
Linus Walleij <linusw@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-i3c@lists.infradead.org, mfd@lists.linux.dev,
linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org,
linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/20] dt-bindings: reset: add Synaptics SL261X SoCs
Date: Tue, 29 Sep 2026 14:14:05 +0800 [thread overview]
Message-ID: <20260929061417.20733-9-jszhang@kernel.org> (raw)
In-Reply-To: <20260929061417.20733-1-jszhang@kernel.org>
Add device tree bindings for the resets on Synaptics SL261X SoCs.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
.../bindings/reset/syna,sl261x-reset.yaml | 40 ++++++++++
include/dt-bindings/reset/syna,sl261x-reset.h | 80 +++++++++++++++++++
2 files changed, 120 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/syna,sl261x-reset.yaml
create mode 100644 include/dt-bindings/reset/syna,sl261x-reset.h
diff --git a/Documentation/devicetree/bindings/reset/syna,sl261x-reset.yaml b/Documentation/devicetree/bindings/reset/syna,sl261x-reset.yaml
new file mode 100644
index 000000000000..8cfec17df800
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/syna,sl261x-reset.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2026 Synaptics Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/syna,sl261x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics SL261X reset controller
+
+maintainers:
+ - Jisheng Zhang <jszhang@kernel.org>
+
+description: The reset controller node must be a sub-node of the chip
+ controller node on SL261X SoCs.
+
+properties:
+ compatible:
+ enum:
+ - syna,sl261x-soc-reset
+ - syna,sl261x-system-reset
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ chip: chip-control@f7e10000 {
+ reg = <0xf7e10000 0x1000>;
+
+ chip_rst: reset {
+ compatible = "syna,sl261x-soc-reset";
+ #reset-cells = <1>;
+ };
+ };
diff --git a/include/dt-bindings/reset/syna,sl261x-reset.h b/include/dt-bindings/reset/syna,sl261x-reset.h
new file mode 100644
index 000000000000..7034f58aae5b
--- /dev/null
+++ b/include/dt-bindings/reset/syna,sl261x-reset.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (C) 2026 Synaptics Incorporated
+ *
+ * Author: Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#ifndef _DT_BINDINGS_SL261X_RESET_H
+#define _DT_BINDINGS_SL261X_RESET_H
+
+/* ACPU subsystem */
+#define RST_SOC_SDIO0 0
+#define RST_SOC_USB0 1
+#define RST_SOC_EMMC 2
+#define RST_SOC_GETH0 3
+#define RST_SOC_SDIO1 4
+#define RST_SOC_USB1 5
+#define RST_SOC_GETH1 6
+#define RST_SOC_USB0PHY 7
+#define RST_SOC_USB0CORE 8
+#define RST_SOC_USB0MAHB 9
+#define RST_SOC_USB1PHY 10
+#define RST_SOC_USB1CORE 11
+#define RST_SOC_USB1MAHB 12
+#define RST_SOC_UART0 13
+#define RST_SOC_UART1 14
+#define RST_SOC_UART2 15
+#define RST_SOC_UART3 16
+#define RST_SOC_I2C0 17
+#define RST_SOC_I2C1 18
+#define RST_SOC_SPI0 19
+#define RST_SOC_SPI1 20
+#define RST_SOC_SPI2 21
+#define RST_SOC_SPI3 22
+#define RST_SOC_APBTIMERS 23
+#define RST_SOC_APBSYSCNT 24
+#define RST_SOC_APBWDT 25
+#define RST_SOC_APBGPIO 26
+#define RST_SOC_APBDMA 27
+#define RST_SOC_GPUCORE 28
+#define RST_SOC_NPUCORE 29
+#define RST_SOC_AVIOAIOG 30
+#define RST_SOC_AVIOVPPG 31
+#define RST_SOC_AVIOVIPG 32
+
+/* system subsystem */
+#define RST_SM_ADCCORE 0
+#define RST_SM_ADCPRST 1
+#define RST_SM_CAN0PRST 2
+#define RST_SM_CAN0SRST 3
+#define RST_SM_CAN1PRST 4
+#define RST_SM_CAN1SRST 5
+#define RST_SM_GPIOPRST 6
+#define RST_SM_GPIOSRST 7
+#define RST_SM_I2CM0PRST 8
+#define RST_SM_I2CM0SRST 9
+#define RST_SM_I2CM1PRST 10
+#define RST_SM_I2CM1SRST 11
+#define RST_SM_I3CPRST 12
+#define RST_SM_I3CSRST 13
+#define RST_SM_PDMPRST 14
+#define RST_SM_PDMSRST 15
+#define RST_SM_PVTHSRST 16
+#define RST_SM_PVTPRST 17
+#define RST_SM_PWMPERIRST 18
+#define RST_SM_PWMPRST 19
+#define RST_SM_SPIMPRST 20
+#define RST_SM_SPIMSRST 21
+#define RST_SM_SPISPRST 22
+#define RST_SM_SPISSRST 23
+#define RST_SM_UART0PRST 24
+#define RST_SM_UART0SRST 25
+#define RST_SM_UART1PRST 26
+#define RST_SM_UART1SRST 27
+#define RST_SM_UART2PRST 28
+#define RST_SM_UART2SRST 29
+#define RST_SM_UART3PRST 30
+#define RST_SM_UART3SRST 31
+
+#endif /* _DT_BINDINGS_SL261X_RESET_H */
--
2.53.0
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Andi Shyti <andi.shyti@kernel.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Frank Li <Frank.Li@nxp.com>, Lee Jones <lee@kernel.org>,
Linus Walleij <linusw@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-i3c@lists.infradead.org, mfd@lists.linux.dev,
linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org,
linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/20] dt-bindings: reset: add Synaptics SL261X SoCs
Date: Tue, 29 Sep 2026 14:14:05 +0800 [thread overview]
Message-ID: <20260929061417.20733-9-jszhang@kernel.org> (raw)
In-Reply-To: <20260929061417.20733-1-jszhang@kernel.org>
Add device tree bindings for the resets on Synaptics SL261X SoCs.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
.../bindings/reset/syna,sl261x-reset.yaml | 40 ++++++++++
include/dt-bindings/reset/syna,sl261x-reset.h | 80 +++++++++++++++++++
2 files changed, 120 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/syna,sl261x-reset.yaml
create mode 100644 include/dt-bindings/reset/syna,sl261x-reset.h
diff --git a/Documentation/devicetree/bindings/reset/syna,sl261x-reset.yaml b/Documentation/devicetree/bindings/reset/syna,sl261x-reset.yaml
new file mode 100644
index 000000000000..8cfec17df800
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/syna,sl261x-reset.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2026 Synaptics Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/syna,sl261x-reset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics SL261X reset controller
+
+maintainers:
+ - Jisheng Zhang <jszhang@kernel.org>
+
+description: The reset controller node must be a sub-node of the chip
+ controller node on SL261X SoCs.
+
+properties:
+ compatible:
+ enum:
+ - syna,sl261x-soc-reset
+ - syna,sl261x-system-reset
+
+ "#reset-cells":
+ const: 1
+
+required:
+ - compatible
+ - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ chip: chip-control@f7e10000 {
+ reg = <0xf7e10000 0x1000>;
+
+ chip_rst: reset {
+ compatible = "syna,sl261x-soc-reset";
+ #reset-cells = <1>;
+ };
+ };
diff --git a/include/dt-bindings/reset/syna,sl261x-reset.h b/include/dt-bindings/reset/syna,sl261x-reset.h
new file mode 100644
index 000000000000..7034f58aae5b
--- /dev/null
+++ b/include/dt-bindings/reset/syna,sl261x-reset.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (C) 2026 Synaptics Incorporated
+ *
+ * Author: Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#ifndef _DT_BINDINGS_SL261X_RESET_H
+#define _DT_BINDINGS_SL261X_RESET_H
+
+/* ACPU subsystem */
+#define RST_SOC_SDIO0 0
+#define RST_SOC_USB0 1
+#define RST_SOC_EMMC 2
+#define RST_SOC_GETH0 3
+#define RST_SOC_SDIO1 4
+#define RST_SOC_USB1 5
+#define RST_SOC_GETH1 6
+#define RST_SOC_USB0PHY 7
+#define RST_SOC_USB0CORE 8
+#define RST_SOC_USB0MAHB 9
+#define RST_SOC_USB1PHY 10
+#define RST_SOC_USB1CORE 11
+#define RST_SOC_USB1MAHB 12
+#define RST_SOC_UART0 13
+#define RST_SOC_UART1 14
+#define RST_SOC_UART2 15
+#define RST_SOC_UART3 16
+#define RST_SOC_I2C0 17
+#define RST_SOC_I2C1 18
+#define RST_SOC_SPI0 19
+#define RST_SOC_SPI1 20
+#define RST_SOC_SPI2 21
+#define RST_SOC_SPI3 22
+#define RST_SOC_APBTIMERS 23
+#define RST_SOC_APBSYSCNT 24
+#define RST_SOC_APBWDT 25
+#define RST_SOC_APBGPIO 26
+#define RST_SOC_APBDMA 27
+#define RST_SOC_GPUCORE 28
+#define RST_SOC_NPUCORE 29
+#define RST_SOC_AVIOAIOG 30
+#define RST_SOC_AVIOVPPG 31
+#define RST_SOC_AVIOVIPG 32
+
+/* system subsystem */
+#define RST_SM_ADCCORE 0
+#define RST_SM_ADCPRST 1
+#define RST_SM_CAN0PRST 2
+#define RST_SM_CAN0SRST 3
+#define RST_SM_CAN1PRST 4
+#define RST_SM_CAN1SRST 5
+#define RST_SM_GPIOPRST 6
+#define RST_SM_GPIOSRST 7
+#define RST_SM_I2CM0PRST 8
+#define RST_SM_I2CM0SRST 9
+#define RST_SM_I2CM1PRST 10
+#define RST_SM_I2CM1SRST 11
+#define RST_SM_I3CPRST 12
+#define RST_SM_I3CSRST 13
+#define RST_SM_PDMPRST 14
+#define RST_SM_PDMSRST 15
+#define RST_SM_PVTHSRST 16
+#define RST_SM_PVTPRST 17
+#define RST_SM_PWMPERIRST 18
+#define RST_SM_PWMPRST 19
+#define RST_SM_SPIMPRST 20
+#define RST_SM_SPIMSRST 21
+#define RST_SM_SPISPRST 22
+#define RST_SM_SPISSRST 23
+#define RST_SM_UART0PRST 24
+#define RST_SM_UART0SRST 25
+#define RST_SM_UART1PRST 26
+#define RST_SM_UART1SRST 27
+#define RST_SM_UART2PRST 28
+#define RST_SM_UART2SRST 29
+#define RST_SM_UART3PRST 30
+#define RST_SM_UART3SRST 31
+
+#endif /* _DT_BINDINGS_SL261X_RESET_H */
--
2.53.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-09-29 6:35 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-29 6:13 [PATCH 00/20] arm64: add Synaptics SL261X SoCs and RDK boards Jisheng Zhang
2026-09-29 6:13 ` Jisheng Zhang
2026-09-29 6:13 ` [PATCH 01/20] dt-bindings: serial: snps-dw-apb-uart: Add Synaptics sl261x uart Jisheng Zhang
2026-09-29 6:13 ` Jisheng Zhang
2026-09-29 6:44 ` sashiko-bot
2026-09-29 6:44 ` sashiko-bot
2026-09-29 6:13 ` [PATCH 02/20] dt-bindings: i2c: dw: Add Synaptics sl261x i2c Jisheng Zhang
2026-09-29 6:13 ` Jisheng Zhang
2026-09-29 6:39 ` sashiko-bot
2026-09-29 6:39 ` sashiko-bot
2026-09-29 20:57 ` Andi Shyti
2026-09-29 20:57 ` Andi Shyti
2026-09-29 6:14 ` [PATCH 03/20] spi: dt-bindings: snps,dw-apb-ssi: Add Synaptics sl261x spi Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:39 ` sashiko-bot
2026-09-29 6:39 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 04/20] dt-bindings: i3c: dw: support up to two reset lines Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:43 ` sashiko-bot
2026-09-29 6:43 ` sashiko-bot
2026-09-29 19:40 ` Conor Dooley
2026-09-29 6:14 ` [PATCH 05/20] i3c: dw: switch to array-based exclusive reset control Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:45 ` sashiko-bot
2026-09-29 6:45 ` sashiko-bot
2026-09-29 15:01 ` Frank Li
2026-09-29 15:01 ` Frank Li
2026-09-29 6:14 ` [PATCH 06/20] dt-bindings: i3c: Add Synaptics sl261x i3c Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:41 ` sashiko-bot
2026-09-29 6:41 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 07/20] arm64: kconfig: let ARCH_BERLIN cover Synaptics arm64 SoCs Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:40 ` sashiko-bot
2026-09-29 6:40 ` sashiko-bot
2026-09-29 6:14 ` Jisheng Zhang [this message]
2026-09-29 6:14 ` [PATCH 08/20] dt-bindings: reset: add Synaptics SL261X SoCs Jisheng Zhang
2026-09-29 6:42 ` sashiko-bot
2026-09-29 6:42 ` sashiko-bot
2026-09-29 19:44 ` Conor Dooley
2026-09-30 15:15 ` Jisheng Zhang
2026-09-30 15:15 ` Jisheng Zhang
2026-09-30 16:49 ` Conor Dooley
2026-10-02 15:35 ` Jisheng Zhang
2026-10-02 15:35 ` Jisheng Zhang
2026-10-05 10:50 ` Conor Dooley
2026-09-29 6:14 ` [PATCH 09/20] reset: add Synaptics SL261x reset support Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:47 ` sashiko-bot
2026-09-29 6:47 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 10/20] pinctrl: berlin: use u16 instead of u8 for the offset Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:42 ` sashiko-bot
2026-09-29 6:42 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 11/20] pinctrl: berlin: enable module build support Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:45 ` sashiko-bot
2026-09-29 6:45 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 12/20] pinctrl: berlin: add optional pinconf support Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:45 ` sashiko-bot
2026-09-29 6:45 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 13/20] dt-bindings: pinctrl: berlin: Support Synaptics SL261X SoCs Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:45 ` sashiko-bot
2026-09-29 6:45 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 14/20] pinctrl: berlin: support " Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:47 ` sashiko-bot
2026-09-29 6:47 ` sashiko-bot
2026-09-29 15:34 ` Uwe Kleine-König
2026-09-29 6:14 ` [PATCH 15/20] dt-bindings: clock: add Synaptics SL261X clock Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:44 ` sashiko-bot
2026-09-29 6:44 ` sashiko-bot
2026-09-29 19:46 ` Conor Dooley
2026-09-29 20:49 ` Rob Herring (Arm)
2026-09-29 20:49 ` Rob Herring (Arm)
2026-09-30 14:18 ` Jisheng Zhang
2026-09-30 14:18 ` Jisheng Zhang
2026-09-29 6:14 ` [PATCH 16/20] clk: berlin: add Synaptics SL261X SoC clocks and plls Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:50 ` sashiko-bot
2026-09-29 6:50 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 17/20] dt-bindings: mfd: Add Synaptics SL261x global block binding Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:45 ` sashiko-bot
2026-09-29 6:45 ` sashiko-bot
2026-09-29 19:55 ` Conor Dooley
2026-09-29 6:14 ` [PATCH 18/20] regulator: dt-bindings: sy8827n: support standard properties Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:40 ` sashiko-bot
2026-09-29 6:40 ` sashiko-bot
2026-09-29 19:40 ` Conor Dooley
2026-09-29 6:14 ` [PATCH 19/20] dt-bindings: arm: berlin: Add Synaptics SL261X SoC and RDK board Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:53 ` sashiko-bot
2026-09-29 6:53 ` sashiko-bot
2026-09-29 6:14 ` [PATCH 20/20] arm64: dts: synaptics: " Jisheng Zhang
2026-09-29 6:14 ` Jisheng Zhang
2026-09-29 6:52 ` sashiko-bot
2026-09-29 6:52 ` sashiko-bot
2026-09-29 19:38 ` [PATCH 00/20] arm64: add Synaptics SL261X SoCs and RDK boards Conor Dooley
2026-09-30 14:15 ` Jisheng Zhang
2026-09-30 14:15 ` Jisheng Zhang
2026-09-30 14:32 ` Jisheng Zhang
2026-09-30 14:32 ` Jisheng Zhang
2026-09-30 16:35 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260929061417.20733-9-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andi.shyti@kernel.org \
--cc=bmasney+clk@redhat.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jbrunet+clk@baylibre.com \
--cc=jirislaby@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mfd@lists.linux.dev \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.