From: Maxim Levitsky <maximlevitsky@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org,
Kernel Testers List <kernel-testers@vger.kernel.org>,
linux-kernel@vger.kernel.org, Andreas Mohr <andi@lisas.de>
Subject: Re: Bugs on aspire one A150
Date: Wed, 12 Nov 2008 19:20:08 +0200 [thread overview]
Message-ID: <491B1048.5020107@gmail.com> (raw)
In-Reply-To: <s5hiqqtkxqr.wl%tiwai@suse.de>
[-- Attachment #1: Type: text/plain, Size: 3088 bytes --]
Takashi Iwai wrote:
> At Sun, 9 Nov 2008 21:09:29 +0100,
> Andreas Mohr wrote:
>> On Sun, Nov 09, 2008 at 07:58:17PM +0100, Takashi Iwai wrote:
>>> At Sun, 9 Nov 2008 16:13:23 +0100,
>>> Andreas Mohr wrote:
>>>> OK, _THIS_ time I actually did get the correct model (last time I tried
>>>> modprobe with model=acer-aspire, but apparently it then used the
>>>> /etc/modprobe.d/ model=toshiba setting, since this time gamix showed
>>>> entirely different controls with i-Mic etc.) - all the more reason to
>>>> log the model name chosen/selected by the driver!!
>>> Build with the debug option (why turned off even if you *are*
>>> debugging?). Then the driver will show you details.
>> Hmm, right, that would have been an (very useful) option, but not for the
>> majority of users OTOH.
>
> I thought many ditros set this option...
>
>> Especially since this is a user-visible module parameter which should thus
>> be confirmed in mainstream user code, via logging.
>
> You can check via /sys/modules/snd_hda_intel/parameters/model whether
> you passed correctly or not, at least :)
>
>> Admittedly not many modules log their settings during startup,
>> but for snd_hda_intel with its two myriads of codec/machine variants
>> and a resulting quarter myriad of issues that would be very useful.
>
> Passing the model option is already a kind of debugging work, IMO.
> You shouldn't do it unless you need it, indeed.
>
>>>> --> I have to admit that usability sucks^Hcould be a lot better.
>>> One would call it rather debuggability than usability.
>>> These are completely different things.
>> See above ;)
>>
>>>> i-Mic on Ekiga with lotsa mixer fiddling didn't work either this time.
>>> OK, then something is missing. But you should test by arecord first
>>> than any complicated applications as a primary test.
>> Good point, will do.
>>
>> Oh, and is there a way to manually alter codec registers?
>
> Try hda-verb program. Build your kernel with CONFIG_SND_HDA_HWDEP=y
> and access via the hwdep device.
> ftp://ftp.suse.com/pub/people/tiwai/misc/hda-verb-0.2.tar.bz2
>
>
> Takashi
For the reference this this list of nodes on ALC268 (main mobo):
0x01 - params
output streams:
0x02 - DAC1 + volume
0x03 - DAC2 + volume (only headphones)
0x06 - s/pdif-out
0x1D - BEEP
input streams:
0x07 - ADC1
0x23 - ADC1 multiplexer + volume
0x08 - ADC2
0x24 - ADC2 multiplexer + volume
output pins(*): (***)
0x14 - LINE-OUT headphones <- 0x0f - line-out (mixer) <- DAC1 + beep
0x15 - HP-OUT speakers <- 0x10 - hp-out (mixer) <- DAC1 + DAC2 + beep
0x16 - MONO-OUT N/A <- 0x0e - mono out (mixer) <- DAC1
0x1E - spdif
input pins(**):
0x12 - DMIC1/2 N/A
0x13 - DMIC3/4 N/A
0x18 - MIC1 external mic + boost
0x19 - MIC2 internal mic + boost
0x1A - LINE-IN line-in + boost
0x1C - CD-IN N/A
* Most output pins may be used as input pins
** LINE-IN, MIC1 might be output of DAC1
*** those are pins that are connected on my main mobo.
/proc/asound/card0/codec#0 is attached (also for main computer, I will
test the 'one' tomorrow
Best regards,
Maxim Levitsky
[-- Attachment #2: codec.txt --]
[-- Type: text/plain, Size: 7397 bytes --]
Codec: Realtek ALC268
Address: 0
Vendor Id: 0x10ec0268
Subsystem Id: 0x1025011e
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x32 0x32]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x32 0x32]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00]
Connection: 1
0x02
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x02 0x1d
Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80]
Connection: 3
0x03 0x1d 0x02
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081003c: IN OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=04, enabled=1
Connection: 1
0x0f
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081003c: IN OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x10
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a19840: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x083724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x99a30941: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x4, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x0281304e: [Jack] Line In at Ext Front
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xe
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x4017952d: [N/A] Speaker at Ext N/A
Conn = Analog, Color = Pink
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x02451130: [Jack] SPDIF Out at Ext Front
Conn = Optical, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=10
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x0b 0x0b]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12
Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x13
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
WARNING: multiple messages have this Message-ID (diff)
From: Maxim Levitsky <maximlevitsky@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Andreas Mohr <andi@lisas.de>,
linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
Kernel Testers List <kernel-testers@vger.kernel.org>
Subject: Re: [alsa-devel] Bugs on aspire one A150
Date: Wed, 12 Nov 2008 19:20:08 +0200 [thread overview]
Message-ID: <491B1048.5020107@gmail.com> (raw)
In-Reply-To: <s5hiqqtkxqr.wl%tiwai@suse.de>
[-- Attachment #1: Type: text/plain, Size: 3088 bytes --]
Takashi Iwai wrote:
> At Sun, 9 Nov 2008 21:09:29 +0100,
> Andreas Mohr wrote:
>> On Sun, Nov 09, 2008 at 07:58:17PM +0100, Takashi Iwai wrote:
>>> At Sun, 9 Nov 2008 16:13:23 +0100,
>>> Andreas Mohr wrote:
>>>> OK, _THIS_ time I actually did get the correct model (last time I tried
>>>> modprobe with model=acer-aspire, but apparently it then used the
>>>> /etc/modprobe.d/ model=toshiba setting, since this time gamix showed
>>>> entirely different controls with i-Mic etc.) - all the more reason to
>>>> log the model name chosen/selected by the driver!!
>>> Build with the debug option (why turned off even if you *are*
>>> debugging?). Then the driver will show you details.
>> Hmm, right, that would have been an (very useful) option, but not for the
>> majority of users OTOH.
>
> I thought many ditros set this option...
>
>> Especially since this is a user-visible module parameter which should thus
>> be confirmed in mainstream user code, via logging.
>
> You can check via /sys/modules/snd_hda_intel/parameters/model whether
> you passed correctly or not, at least :)
>
>> Admittedly not many modules log their settings during startup,
>> but for snd_hda_intel with its two myriads of codec/machine variants
>> and a resulting quarter myriad of issues that would be very useful.
>
> Passing the model option is already a kind of debugging work, IMO.
> You shouldn't do it unless you need it, indeed.
>
>>>> --> I have to admit that usability sucks^Hcould be a lot better.
>>> One would call it rather debuggability than usability.
>>> These are completely different things.
>> See above ;)
>>
>>>> i-Mic on Ekiga with lotsa mixer fiddling didn't work either this time.
>>> OK, then something is missing. But you should test by arecord first
>>> than any complicated applications as a primary test.
>> Good point, will do.
>>
>> Oh, and is there a way to manually alter codec registers?
>
> Try hda-verb program. Build your kernel with CONFIG_SND_HDA_HWDEP=y
> and access via the hwdep device.
> ftp://ftp.suse.com/pub/people/tiwai/misc/hda-verb-0.2.tar.bz2
>
>
> Takashi
For the reference this this list of nodes on ALC268 (main mobo):
0x01 - params
output streams:
0x02 - DAC1 + volume
0x03 - DAC2 + volume (only headphones)
0x06 - s/pdif-out
0x1D - BEEP
input streams:
0x07 - ADC1
0x23 - ADC1 multiplexer + volume
0x08 - ADC2
0x24 - ADC2 multiplexer + volume
output pins(*): (***)
0x14 - LINE-OUT headphones <- 0x0f - line-out (mixer) <- DAC1 + beep
0x15 - HP-OUT speakers <- 0x10 - hp-out (mixer) <- DAC1 + DAC2 + beep
0x16 - MONO-OUT N/A <- 0x0e - mono out (mixer) <- DAC1
0x1E - spdif
input pins(**):
0x12 - DMIC1/2 N/A
0x13 - DMIC3/4 N/A
0x18 - MIC1 external mic + boost
0x19 - MIC2 internal mic + boost
0x1A - LINE-IN line-in + boost
0x1C - CD-IN N/A
* Most output pins may be used as input pins
** LINE-IN, MIC1 might be output of DAC1
*** those are pins that are connected on my main mobo.
/proc/asound/card0/codec#0 is attached (also for main computer, I will
test the 'one' tomorrow
Best regards,
Maxim Levitsky
[-- Attachment #2: codec.txt --]
[-- Type: text/plain, Size: 7397 bytes --]
Codec: Realtek ALC268
Address: 0
Vendor Id: 0x10ec0268
Subsystem Id: 0x1025011e
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x32 0x32]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x32 0x32]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00]
Connection: 1
0x02
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Connection: 2
0x02 0x1d
Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80]
Connection: 3
0x03 0x1d 0x02
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081003c: IN OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=04, enabled=1
Connection: 1
0x0f
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x081003c: IN OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x10
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x0810: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a19840: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x083724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x99a30941: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x4, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x0281304e: [Jack] Line In at Ext Front
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xe
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x4017952d: [N/A] Speaker at Ext N/A
Conn = Analog, Color = Pink
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x0810: OUT
Pin Default 0x02451130: [Jack] SPDIF Out at Ext Front
Conn = Optical, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=10
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x0b 0x0b]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12
Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x13
next prev parent reply other threads:[~2008-11-12 17:20 UTC|newest]
Thread overview: 185+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-08 3:26 Bugs on aspire one A150 Maxim Levitsky
2008-11-08 3:26 ` Maxim Levitsky
[not found] ` <491506DB.1070000-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-11-08 11:57 ` Alan Jenkins
2008-11-08 11:57 ` Alan Jenkins
2008-11-09 0:52 ` Maxim Levitsky
2008-11-09 0:52 ` Maxim Levitsky
2008-11-09 10:43 ` Alan Jenkins
[not found] ` <49163435.20301-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-11-09 8:54 ` [alsa-devel] " Takashi Iwai
2008-11-09 8:54 ` Takashi Iwai
2008-11-09 13:31 ` Andreas Mohr
2008-11-09 13:31 ` [alsa-devel] " Andreas Mohr
2008-11-09 15:13 ` Andreas Mohr
2008-11-09 15:13 ` [alsa-devel] " Andreas Mohr
[not found] ` <20081109151323.GA18705-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2008-11-09 18:58 ` Takashi Iwai
2008-11-09 18:58 ` Takashi Iwai
2008-11-09 20:09 ` Andreas Mohr
2008-11-09 20:09 ` [alsa-devel] " Andreas Mohr
[not found] ` <20081109200929.GA29333-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2008-11-12 11:08 ` Takashi Iwai
2008-11-12 11:08 ` Takashi Iwai
2008-11-12 17:07 ` Maxim Levitsky
2008-11-12 17:07 ` [alsa-devel] " Maxim Levitsky
[not found] ` <491B0D38.1050207-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-11-12 18:05 ` Andreas Mohr
2008-11-12 18:05 ` Andreas Mohr
[not found] ` <20081112180519.GA21919-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2008-11-14 18:05 ` Maxim Levitsky
2008-11-14 18:05 ` Maxim Levitsky
[not found] ` <491DBDEA.9010104-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-11-22 19:00 ` Maxim Levitsky
2008-11-22 19:00 ` Maxim Levitsky
2008-11-22 19:43 ` Andreas Mohr
2008-11-22 19:43 ` [alsa-devel] " Andreas Mohr
[not found] ` <492856C2.8000707-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-11-24 14:35 ` Takashi Iwai
2008-11-24 14:35 ` Takashi Iwai
2009-03-15 9:21 ` Andreas Mohr
2009-03-15 9:21 ` [alsa-devel] " Andreas Mohr
2009-03-16 12:03 ` Andreas Mohr
2009-03-16 12:03 ` [alsa-devel] " Andreas Mohr
[not found] ` <20090316120312.GA19299-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2009-03-16 12:09 ` Takashi Iwai
2009-03-16 12:09 ` Takashi Iwai
2009-03-16 13:30 ` Andreas Mohr
2009-03-16 13:30 ` [alsa-devel] " Andreas Mohr
[not found] ` <20090316133001.GA8437-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2009-03-16 14:18 ` Takashi Iwai
2009-03-16 14:18 ` Takashi Iwai
2009-03-16 14:31 ` Andreas Mohr
2009-03-16 14:31 ` [alsa-devel] " Andreas Mohr
2009-03-16 14:42 ` Takashi Iwai
2009-03-16 14:42 ` [alsa-devel] " Takashi Iwai
2009-03-16 14:50 ` Andreas Mohr
2009-03-16 14:50 ` [alsa-devel] " Andreas Mohr
[not found] ` <20090316145036.GA26358-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2009-03-16 15:34 ` Takashi Iwai
2009-03-16 15:34 ` Takashi Iwai
2009-03-16 16:02 ` Andreas Mohr
2009-03-16 16:02 ` [alsa-devel] " Andreas Mohr
2009-03-16 16:06 ` Takashi Iwai
2009-03-16 16:06 ` [alsa-devel] " Takashi Iwai
[not found] ` <s5hwsappi44.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
2009-03-16 16:19 ` Takashi Iwai
2009-03-16 16:19 ` Takashi Iwai
2009-03-16 17:00 ` Andreas Mohr
2009-03-16 17:00 ` [alsa-devel] " Andreas Mohr
2009-03-16 17:15 ` Takashi Iwai
2009-03-16 17:15 ` [alsa-devel] " Takashi Iwai
[not found] ` <s5hljr5pex0.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
2009-03-16 17:30 ` Andreas Mohr
2009-03-16 17:30 ` Andreas Mohr
[not found] ` <20090316173000.GA25647-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2009-03-16 17:34 ` Takashi Iwai
2009-03-16 17:34 ` Takashi Iwai
2009-03-16 18:06 ` Andreas Mohr
2009-03-16 18:06 ` [alsa-devel] " Andreas Mohr
2009-03-16 20:28 ` Takashi Iwai
2009-03-16 20:28 ` [alsa-devel] " Takashi Iwai
2009-03-16 21:22 ` Andreas Mohr
2009-03-16 21:22 ` [alsa-devel] " Andreas Mohr
[not found] ` <20090316212227.GA29471-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2009-03-17 0:52 ` Maxim Levitsky
2009-03-17 0:52 ` Maxim Levitsky
2009-03-17 7:57 ` Takashi Iwai
2009-03-17 7:57 ` [alsa-devel] " Takashi Iwai
[not found] ` <s5heiwwzim7.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
2009-03-17 11:30 ` Maxim Levitsky
2009-03-17 11:30 ` Maxim Levitsky
2009-03-17 12:52 ` Takashi Iwai
2009-03-17 12:52 ` [alsa-devel] " Takashi Iwai
2009-03-17 7:57 ` Takashi Iwai
2009-03-17 7:57 ` [alsa-devel] " Takashi Iwai
[not found] ` <s5hfxhczinh.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
2009-03-17 10:05 ` Andreas Mohr
2009-03-17 10:05 ` Andreas Mohr
2009-03-17 10:38 ` Andreas Mohr
2009-03-17 10:38 ` [alsa-devel] " Andreas Mohr
[not found] ` <20090317103845.GA26007-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2009-03-17 10:47 ` Andreas Mohr
2009-03-17 10:47 ` Andreas Mohr
2009-03-17 11:25 ` Takashi Iwai
2009-03-17 11:25 ` [alsa-devel] " Takashi Iwai
[not found] ` <s5h3adcpf1i.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
2009-03-17 16:18 ` Andreas Mohr
2009-03-17 16:18 ` Andreas Mohr
2009-03-17 20:32 ` Takashi Iwai
2009-03-17 20:32 ` [alsa-devel] " Takashi Iwai
2009-03-18 9:05 ` Andreas Mohr
2009-03-18 9:05 ` [alsa-devel] " Andreas Mohr
2009-03-18 9:19 ` Takashi Iwai
2009-03-18 9:19 ` [alsa-devel] " Takashi Iwai
2009-03-20 18:56 ` Andreas Mohr
2009-03-20 18:56 ` [alsa-devel] " Andreas Mohr
2009-03-20 20:33 ` Takashi Iwai
2009-03-20 20:33 ` [alsa-devel] " Takashi Iwai
[not found] ` <s5hmybgnddc.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
2009-03-22 12:55 ` Andreas Mohr
2009-03-22 12:55 ` Andreas Mohr
[not found] ` <20090322125517.GA26498-p/qQFhXj4MHA4IYVXhSI5GHfThorsUsI@public.gmane.org>
2009-03-23 6:51 ` Takashi Iwai
2009-03-23 6:51 ` Takashi Iwai
2008-11-12 17:20 ` Maxim Levitsky [this message]
2008-11-12 17:20 ` Maxim Levitsky
[not found] ` <s5hiqqtkxqr.wl%tiwai-l3A5Bk7waGM@public.gmane.org>
2008-11-12 18:53 ` HDA-emu 0.0.1 (Re: [alsa-devel] Bugs on aspire one A150) Takashi Iwai
2008-11-12 18:53 ` Takashi Iwai
2008-11-09 10:43 ` Bugs on aspire one A150 Alan Jenkins
2008-11-09 10:43 ` Alan Jenkins
2008-11-12 17:48 ` Maxim Levitsky
2008-11-12 17:48 ` Maxim Levitsky
2008-11-09 0:52 ` Maxim Levitsky
[not found] ` <49157E97.60503-cCz0Lq7MMjm9FHfhHBbuYA@public.gmane.org>
2008-11-14 19:06 ` Maxim Levitsky
2008-11-14 19:06 ` Maxim Levitsky
[not found] ` <491DCC21.6060705-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-11-14 19:59 ` Alan Jenkins
2008-11-14 19:59 ` Alan Jenkins
[not found] ` <61b223ba0811141159k179558d0i60cebf373baa9fb8-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2008-11-15 12:52 ` Maxim Levitsky
2008-11-15 12:52 ` Maxim Levitsky
2008-11-15 12:55 ` Matthew Garrett
2008-11-14 19:06 ` Maxim Levitsky
2008-11-08 11:57 ` Alan Jenkins
2008-11-10 16:51 ` Bob Copeland
2008-11-10 16:51 ` Bob Copeland
2008-11-10 21:33 ` Maxim Levitsky
2008-11-10 21:33 ` Maxim Levitsky
2008-11-10 22:12 ` [ath5k-devel] " Nick Kossifidis
[not found] ` <4918A8C5.3050607-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2008-11-10 22:12 ` Nick Kossifidis
2008-11-10 22:12 ` [ath5k-devel] " Nick Kossifidis
2008-11-12 17:51 ` Maxim Levitsky
2008-11-13 14:58 ` Bob Copeland
2008-11-14 3:47 ` Bob Copeland
2008-11-14 18:57 ` Maxim Levitsky
2008-11-17 17:28 ` Bob Copeland
2008-11-17 18:55 ` Maxim Levitsky
2008-12-01 15:33 ` Maxim Levitsky
2008-12-01 15:33 ` Maxim Levitsky
2008-12-01 15:33 ` Maxim Levitsky
2008-12-13 13:28 ` Maxim Levitsky
2008-12-13 13:28 ` Maxim Levitsky
2008-12-13 13:28 ` Maxim Levitsky
2008-12-13 14:08 ` Nick Kossifidis
2008-12-13 14:08 ` Nick Kossifidis
2008-12-13 14:08 ` Nick Kossifidis
2008-12-13 14:36 ` Maxim Levitsky
2008-12-13 14:36 ` Maxim Levitsky
2008-12-13 14:36 ` Maxim Levitsky
2008-12-13 14:38 ` Maxim Levitsky
2008-12-13 14:38 ` Maxim Levitsky
2008-12-13 14:38 ` Maxim Levitsky
2008-12-13 14:24 ` Bob Copeland
2008-12-13 14:31 ` Maxim Levitsky
2008-12-30 4:26 ` Bob Copeland
2008-12-30 12:43 ` Maxim Levitsky
2008-12-31 9:18 ` Andreas Mohr
2008-12-31 13:59 ` Andreas Mohr
2008-12-31 14:06 ` Bob Copeland
2008-12-31 14:03 ` Bob Copeland
2008-12-31 16:51 ` Maxim Levitsky
2009-01-01 13:41 ` Andreas Mohr
2009-01-01 14:15 ` Maxim Levitsky
2009-01-01 20:27 ` Andreas Mohr
2009-01-01 15:09 ` Bob Copeland
2008-11-10 21:33 ` Maxim Levitsky
2008-11-10 16:51 ` Bob Copeland
2008-12-13 13:15 ` Maxim Levitsky
2008-12-13 13:15 ` Maxim Levitsky
2008-12-13 13:35 ` Rafael J. Wysocki
2008-12-13 13:35 ` Rafael J. Wysocki
2008-12-13 13:35 ` Rafael J. Wysocki
2008-12-13 14:21 ` Maxim Levitsky
2008-12-13 14:21 ` Maxim Levitsky
2008-12-13 14:21 ` Maxim Levitsky
2008-12-13 17:42 ` Rafael J. Wysocki
2008-12-13 17:42 ` Rafael J. Wysocki
2008-12-13 17:42 ` Rafael J. Wysocki
2008-12-13 18:04 ` Maxim Levitsky
2008-12-13 18:04 ` Maxim Levitsky
2008-12-13 18:04 ` Maxim Levitsky
2008-12-14 22:29 ` J.A. Magallón
2008-12-14 22:57 ` J.A. Magallón
2008-12-14 23:18 ` Maxim Levitsky
2008-12-14 23:24 ` J.A. Magallón
2008-12-14 23:35 ` J.A. Magallón
2008-12-13 13:15 ` Maxim Levitsky
-- strict thread matches above, loose matches on Subject: below --
2008-11-08 3:26 Maxim Levitsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=491B1048.5020107@gmail.com \
--to=maximlevitsky@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=andi@lisas.de \
--cc=kernel-testers@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.