From: Aneesh V <aneesh@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.
Date: Fri, 20 Jan 2012 17:43:22 +0530 [thread overview]
Message-ID: <4F195A62.7030207@ti.com> (raw)
In-Reply-To: <CABkLOboGwJkDYgrS3L7UCRtFHt123B92-V+2=t1RNiWLHQAJVQ@mail.gmail.com>
On Friday 20 January 2012 02:51 PM, Christian Riesch wrote:
> Hi Aneesh,
>
> On Fri, Jan 20, 2012 at 9:52 AM, Aneesh V<aneesh@ti.com> wrote:
>> Sughosh,
> [...]
>> Can you send the value of SCR you found at SPL entry? This will clarify
>> what's enabled and what's not.
>
> I would like to try that on my board as well for comparison. Could you
> please tell me how this register can be read? In the ARM manuals SCR
> seems to have several meanings... Thank you!
> Regards, Christian
If you have a JTAG based debugger that has the capability of displaying
CP15 registers, look for "CP15 System Control Register". Otherwise you
will have to read it using an assembly instruction like below:
mrc p15, 0, r0, c1, c0, 0
After this instruction r0 will contain the SCR value. arm926ejs/start.S
has this instruction at line #367. You can put a breakpoint after this
and look at r0.
br,
Aneesh
next prev parent reply other threads:[~2012-01-20 12:13 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-09 18:25 [U-Boot] [PATCH 1/2] Flush the date cache before disabling it Sughosh Ganu
2012-01-09 18:41 ` Mike Frysinger
2012-01-09 18:51 ` Sughosh Ganu
2012-01-10 18:12 ` [U-Boot] [PATCH 1/2 V2] arm926: Flush the data " Sughosh Ganu
2012-01-10 20:07 ` Marek Vasut
2012-01-11 6:20 ` Sughosh Ganu
2012-01-11 10:47 ` Marek Vasut
2012-01-11 12:11 ` Sughosh Ganu
2012-01-11 12:42 ` Marek Vasut
2012-01-11 13:31 ` Sughosh Ganu
2012-01-11 13:51 ` Marek Vasut
2012-01-11 13:52 ` Marek Vasut
2012-01-11 14:50 ` Sughosh Ganu
2012-01-11 15:01 ` Marek Vasut
2012-01-11 15:09 ` Sughosh Ganu
2012-01-11 18:50 ` Marek Vasut
2012-01-11 21:07 ` Christian Riesch
2012-01-11 22:13 ` Marek Vasut
2012-01-12 5:56 ` Christian Riesch
2012-01-12 6:29 ` Sughosh Ganu
2012-01-14 9:09 ` Albert ARIBAUD
2012-01-14 17:18 ` Christian Riesch
2012-01-12 12:03 ` Christian Riesch
2012-01-12 13:53 ` Sughosh Ganu
2012-01-12 14:04 ` Christian Riesch
2012-01-12 14:43 ` Sughosh Ganu
2012-01-14 17:20 ` Christian Riesch
2012-01-14 18:02 ` Sughosh Ganu
2012-01-13 8:06 ` Christian Riesch
2012-01-13 8:26 ` Sughosh Ganu
2012-01-13 14:41 ` Tom Rini
2012-01-13 17:23 ` Sughosh Ganu
2012-01-13 15:29 ` Heiko Schocher
2012-01-13 17:38 ` Sughosh Ganu
2012-01-13 18:19 ` Aneesh V
2012-01-14 7:45 ` Sughosh Ganu
2012-01-15 8:13 ` Heiko Schocher
2012-01-16 17:57 ` Tom Rini
2012-01-17 6:39 ` Heiko Schocher
2012-01-17 6:46 ` Sughosh Ganu
2012-01-17 15:27 ` Tom Rini
2012-01-19 6:53 ` Sughosh Ganu
2012-01-19 10:17 ` Aneesh V
2012-01-19 11:30 ` Christian Riesch
2012-01-19 11:54 ` Aneesh V
2012-01-20 7:28 ` Christian Riesch
2012-01-20 8:52 ` Aneesh V
2012-01-20 9:21 ` Christian Riesch
2012-01-20 12:13 ` Aneesh V [this message]
2012-01-20 12:48 ` Christian Riesch
2012-01-20 13:06 ` Aneesh V
2012-01-27 18:33 ` Tom Rini
2012-01-29 13:36 ` Christian Riesch
2012-01-30 6:39 ` Heiko Schocher
2012-01-30 8:10 ` Christian Riesch
2012-01-30 9:04 ` Sughosh Ganu
2012-01-30 10:38 ` Christian Riesch
2012-01-30 7:06 ` Sughosh Ganu
2012-01-30 17:03 ` Tom Rini
2012-01-31 4:09 ` Sughosh Ganu
2012-01-31 13:58 ` Christian Riesch
2012-01-20 11:56 ` Tom Rini
2012-01-13 15:06 ` Heiko Schocher
2012-01-13 17:22 ` Sughosh Ganu
2012-01-14 7:49 ` [U-Boot] [PATCH 1/2 V3] " Sughosh Ganu
2012-01-14 9:02 ` Albert ARIBAUD
2012-01-14 9:21 ` Sughosh Ganu
2012-01-14 10:34 ` Albert ARIBAUD
2012-01-14 14:02 ` [U-Boot] [PATCH 1/2 V4] " Sughosh Ganu
2012-02-18 15:41 ` Albert ARIBAUD
2012-02-18 18:51 ` [U-Boot] [PATCH 1/2 V3] " Christian Riesch
2012-02-19 8:31 ` Albert ARIBAUD
2012-01-20 9:22 ` [U-Boot] [PATCH 1/2 V2] " James W.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F195A62.7030207@ti.com \
--to=aneesh@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.