From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Hui Wang <jason77.wang@gmail.com>
Cc: Shawn Guo <shawn.guo@linaro.org>,
"David S. Miller" <davem@davemloft.net>,
linux-can@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support
Date: Thu, 28 Jun 2012 12:32:50 +0200 [thread overview]
Message-ID: <4FEC32D2.4060200@pengutronix.de> (raw)
In-Reply-To: <4FEC015A.7050602@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2131 bytes --]
On 06/28/2012 09:01 AM, Hui Wang wrote:
> Shawn Guo wrote:
>> On Thu, Jun 28, 2012 at 02:14:39PM +0800, Hui Wang wrote:
>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>>>> b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>>>> index 8ff324e..e0dbac7 100644
>>>> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>>>> +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>>>> @@ -15,6 +15,8 @@ Required properties:
>>>> Optional properties:
>>>> - clock-frequency : The oscillator frequency driving the flexcan device
>>>> +- phy-enable-gpios : Specify the gpio used to enable phy
>>>> +- phy-standby-gpios : Specify the gpio used to put phy into STANDBY
>>>> mode
>>>> Example:
>>>>
>>> Do we need to add new added entries in the example section as well.
>>>
>>> E.g.
>>>
>>> + phy-enable-gpios = <&gpio1 4 0>; /* GPIO1_4, active high*/
>>> + phy-standby-gpios = <&gpio1 2 1>; /* GPIO1_2, active low */
>>>
>>>
>> I chose not to because after all these two are optional properties.
>>
>>
> OK.
>>>> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
>>>> index 38c0690..1ce3f9e 100644
>>>> --- a/drivers/net/can/flexcan.c
>>>> +++ b/drivers/net/can/flexcan.c
>>>> @@ -26,6 +26,7 @@
>>>> #include <linux/can/platform/flexcan.h>
>>>> #include <linux/clk.h>
>>>> #include <linux/delay.h>
>>>> +#include <linux/gpio.h>
>>>>
>>> It seems <linux/of_gpio.h> already unconditionally includes this header.
>>>
>>
>> Documentation/SubmitChecklist
>>
>> 1: If you use a facility then #include the file that defines/declares
>> that facility. Don't depend on other header files pulling in ones
>> that you use.
>>
>>
> Got it.
>
> OK to me.
Is this an Acked-by?
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support
Date: Thu, 28 Jun 2012 12:32:50 +0200 [thread overview]
Message-ID: <4FEC32D2.4060200@pengutronix.de> (raw)
In-Reply-To: <4FEC015A.7050602@gmail.com>
On 06/28/2012 09:01 AM, Hui Wang wrote:
> Shawn Guo wrote:
>> On Thu, Jun 28, 2012 at 02:14:39PM +0800, Hui Wang wrote:
>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>>>> b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>>>> index 8ff324e..e0dbac7 100644
>>>> --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>>>> +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
>>>> @@ -15,6 +15,8 @@ Required properties:
>>>> Optional properties:
>>>> - clock-frequency : The oscillator frequency driving the flexcan device
>>>> +- phy-enable-gpios : Specify the gpio used to enable phy
>>>> +- phy-standby-gpios : Specify the gpio used to put phy into STANDBY
>>>> mode
>>>> Example:
>>>>
>>> Do we need to add new added entries in the example section as well.
>>>
>>> E.g.
>>>
>>> + phy-enable-gpios = <&gpio1 4 0>; /* GPIO1_4, active high*/
>>> + phy-standby-gpios = <&gpio1 2 1>; /* GPIO1_2, active low */
>>>
>>>
>> I chose not to because after all these two are optional properties.
>>
>>
> OK.
>>>> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
>>>> index 38c0690..1ce3f9e 100644
>>>> --- a/drivers/net/can/flexcan.c
>>>> +++ b/drivers/net/can/flexcan.c
>>>> @@ -26,6 +26,7 @@
>>>> #include <linux/can/platform/flexcan.h>
>>>> #include <linux/clk.h>
>>>> #include <linux/delay.h>
>>>> +#include <linux/gpio.h>
>>>>
>>> It seems <linux/of_gpio.h> already unconditionally includes this header.
>>>
>>
>> Documentation/SubmitChecklist
>>
>> 1: If you use a facility then #include the file that defines/declares
>> that facility. Don't depend on other header files pulling in ones
>> that you use.
>>
>>
> Got it.
>
> OK to me.
Is this an Acked-by?
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120628/b1b05659/attachment.sig>
next prev parent reply other threads:[~2012-06-28 10:32 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-28 3:21 [PATCH v2 0/2] flexcan driver updates Shawn Guo
2012-06-28 3:21 ` Shawn Guo
2012-06-28 3:21 ` [PATCH v2 1/2] net: flexcan: clock-frequency is optional for device tree probe Shawn Guo
2012-06-28 3:21 ` Shawn Guo
2012-06-28 11:23 ` Dong Aisheng
2012-06-28 11:23 ` Dong Aisheng
2012-06-28 3:21 ` [PATCH v2 2/2] net: flexcan: add transceiver switch gpios support Shawn Guo
2012-06-28 3:21 ` Shawn Guo
2012-06-28 5:22 ` Lothar Waßmann
2012-06-28 5:22 ` Lothar Waßmann
2012-06-28 5:30 ` Shawn Guo
2012-06-28 5:30 ` Shawn Guo
2012-06-28 6:14 ` Hui Wang
2012-06-28 6:14 ` Hui Wang
2012-06-28 6:34 ` Shawn Guo
2012-06-28 6:34 ` Shawn Guo
2012-06-28 7:01 ` Hui Wang
2012-06-28 7:01 ` Hui Wang
2012-06-28 10:32 ` Marc Kleine-Budde [this message]
2012-06-28 10:32 ` Marc Kleine-Budde
2012-06-28 10:31 ` Marc Kleine-Budde
2012-06-28 10:31 ` Marc Kleine-Budde
2012-06-28 11:21 ` Shawn Guo
2012-06-28 11:21 ` Shawn Guo
2012-06-28 11:29 ` Marc Kleine-Budde
2012-06-28 11:29 ` Marc Kleine-Budde
2012-06-28 11:41 ` Shawn Guo
2012-06-28 11:41 ` Shawn Guo
2012-06-28 11:52 ` Shawn Guo
2012-06-28 11:52 ` Shawn Guo
2012-06-28 12:05 ` Shawn Guo
2012-06-28 12:05 ` Shawn Guo
2012-06-28 12:11 ` Dong Aisheng
2012-06-28 12:11 ` Dong Aisheng
2012-06-28 12:19 ` Lothar Waßmann
2012-06-28 12:19 ` Lothar Waßmann
2012-06-28 12:07 ` Lothar Waßmann
2012-06-28 12:07 ` Lothar Waßmann
2012-06-28 12:13 ` Shawn Guo
2012-06-28 12:13 ` Shawn Guo
2012-06-28 12:24 ` Lothar Waßmann
2012-06-28 12:24 ` Lothar Waßmann
2012-07-02 2:55 ` Hui Wang
2012-07-02 2:55 ` Hui Wang
2012-06-28 12:08 ` Kurt Van Dijck
2012-06-28 12:08 ` Kurt Van Dijck
2012-06-28 12:10 ` Marc Kleine-Budde
2012-06-28 12:10 ` Marc Kleine-Budde
2012-06-28 12:16 ` Shawn Guo
2012-06-28 12:16 ` Shawn Guo
2012-06-28 11:39 ` Dong Aisheng
2012-06-28 11:39 ` Dong Aisheng
2012-06-28 11:33 ` Dong Aisheng
2012-06-28 11:33 ` Dong Aisheng
2012-06-28 11:46 ` Shawn Guo
2012-06-28 11:46 ` Shawn Guo
2012-06-28 11:48 ` Dong Aisheng
2012-06-28 11:48 ` Dong Aisheng
2012-06-28 12:00 ` Shawn Guo
2012-06-28 12:00 ` Shawn Guo
2012-06-28 12:02 ` Dong Aisheng
2012-06-28 12:02 ` Dong Aisheng
2012-06-28 12:19 ` Shawn Guo
2012-06-28 12:19 ` Shawn Guo
2012-06-28 12:05 ` Marc Kleine-Budde
2012-06-28 12:05 ` Marc Kleine-Budde
2012-06-28 12:18 ` Dong Aisheng
2012-06-28 12:18 ` Dong Aisheng
2012-06-28 12:32 ` Lothar Waßmann
2012-06-28 12:32 ` Lothar Waßmann
2012-06-28 12:40 ` Shawn Guo
2012-06-28 12:40 ` Shawn Guo
2012-06-28 12:47 ` Dong Aisheng
2012-06-28 12:47 ` Dong Aisheng
2012-06-28 12:39 ` Shawn Guo
2012-06-28 12:39 ` Shawn Guo
2012-06-29 9:27 ` Marc Kleine-Budde
2012-06-29 9:27 ` Marc Kleine-Budde
[not found] ` <502226AB.4050205@gmail.com>
2012-08-08 9:55 ` Marc Kleine-Budde
2012-08-09 2:39 ` Hui Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FEC32D2.4060200@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=jason77.wang@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.