* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
@ 2010-03-02 15:56 hongjianli.nudt at gmail.com
2010-03-03 4:01 ` Pavel Roskin
2010-03-03 7:07 ` hongjianli.nudt at gmail.com
0 siblings, 2 replies; 11+ messages in thread
From: hongjianli.nudt at gmail.com @ 2010-03-02 15:56 UTC (permalink / raw)
To: ath9k-devel
Hi list,
I'm using the UBNT RS pro with ar9220 interface. Is there anyone to run it in 802.11n mode? or give me some hints, Thank you!
2010-03-02
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100302/1186cd1a/attachment.htm
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-02 15:56 [ath9k-devel] Ubnt rs pro ar9220 ath9k driver hongjianli.nudt at gmail.com
@ 2010-03-03 4:01 ` Pavel Roskin
2010-03-03 7:07 ` hongjianli.nudt at gmail.com
1 sibling, 0 replies; 11+ messages in thread
From: Pavel Roskin @ 2010-03-03 4:01 UTC (permalink / raw)
To: ath9k-devel
On Tue, 2010-03-02 at 23:56 +0800, hongjianli.nudt at gmail.com wrote:
> Hi list,
> I'm using the UBNT RS pro with ar9220 interface. Is there anyone to
> run it in 802.11n mode? or give me some hints, Thank you!
I tested Ubiquti SR71-12 in 802.11n mode with no problems. It's also
AR9220 based.
It's better that you describe the problem rather than look for somebody
who has exactly the same hardware and knows what you are talking about.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-02 15:56 [ath9k-devel] Ubnt rs pro ar9220 ath9k driver hongjianli.nudt at gmail.com
2010-03-03 4:01 ` Pavel Roskin
@ 2010-03-03 7:07 ` hongjianli.nudt at gmail.com
2010-03-03 14:24 ` xxiao
1 sibling, 1 reply; 11+ messages in thread
From: hongjianli.nudt at gmail.com @ 2010-03-03 7:07 UTC (permalink / raw)
To: ath9k-devel
there are 2 RS pro with ar9220 interface.
wlan0 IEEE 802.11abgn ESSID:"test"
Mode:Ad-Hoc Frequency:2.427 GHz Cell: 26:56:B1:2A:08:9C
Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
node 2:
wlan0 IEEE 802.11abgn ESSID:"test"
Mode:Ad-Hoc Frequency:2.427 GHz Cell: 26:56:B1:2A:08:9C
Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
But the result of iperf is
root at OpenWrt:/# iperf -c 192.168.11.10 -i 5 -t 500
------------------------------------------------------------
Client connecting to 192.168.11.10, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.11.20 port 51512 connected with 192.168.11.10 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 5.0 sec 10.3 MBytes 17.4 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 5.0-10.0 sec 9.36 MBytes 15.7 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 10.0-15.0 sec 9.08 MBytes 15.2 Mbits/sec
May I miss something?
2010-03-03
???? Pavel Roskin
????? 2010-03-03 12:01:45
???? hongjianli.nudt
??? ath9k-devel
??? Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
On Tue, 2010-03-02 at 23:56 +0800, hongjianli.nudt at gmail.com wrote:
> Hi list,
> I'm using the UBNT RS pro with ar9220 interface. Is there anyone to
> run it in 802.11n mode? or give me some hints, Thank you!
I tested Ubiquti SR71-12 in 802.11n mode with no problems. It's also
AR9220 based.
It's better that you describe the problem rather than look for somebody
who has exactly the same hardware and knows what you are talking about.
--
Regards,
Pavel Roskin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100303/15f2de92/attachment.htm
^ permalink raw reply [flat|nested] 11+ messages in thread* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-03 7:07 ` hongjianli.nudt at gmail.com
@ 2010-03-03 14:24 ` xxiao
2010-03-03 14:30 ` hongjianli.nudt
0 siblings, 1 reply; 11+ messages in thread
From: xxiao @ 2010-03-03 14:24 UTC (permalink / raw)
To: ath9k-devel
You're running ad-hoc mode, I have never seen that supports 11N HT speed,? though you can easily get 11n/HT under AP/STA scenario.
xxiao
--- On Wed, 3/3/10, hongjianli.nudt at gmail.com <hongjianli.nudt@gmail.com> wrote:
From: hongjianli.nudt@gmail.com <hongjianli.nudt@gmail.com>
Subject: Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
To: "ath9k-devel" <ath9k-devel@lists.ath9k.org>
Date: Wednesday, March 3, 2010, 1:07 AM
_filtered #yiv1617265202 {
font-family:??;
}
_filtered #yiv1617265202 {
font-family:Verdana;
}
_filtered #yiv1617265202 {
}
_filtered #yiv1617265202 {margin:72.0pt 90.0pt 72.0pt 90.0pt;}
#yiv1617265202 P.MsoNormal {
TEXT-JUSTIFY:inter-ideograph;FONT-SIZE:10.5pt;MARGIN:0cm 0cm 0pt;FONT-FAMILY:"Times New Roman";TEXT-ALIGN:justify;}
#yiv1617265202 LI.MsoNormal {
TEXT-JUSTIFY:inter-ideograph;FONT-SIZE:10.5pt;MARGIN:0cm 0cm 0pt;FONT-FAMILY:"Times New Roman";TEXT-ALIGN:justify;}
#yiv1617265202 DIV.MsoNormal {
TEXT-JUSTIFY:inter-ideograph;FONT-SIZE:10.5pt;MARGIN:0cm 0cm 0pt;FONT-FAMILY:"Times New Roman";TEXT-ALIGN:justify;}
#yiv1617265202 A:link {
COLOR:blue;TEXT-DECORATION:underline;}
#yiv1617265202 SPAN.MsoHyperlink {
COLOR:blue;TEXT-DECORATION:underline;}
#yiv1617265202 A:visited {
COLOR:purple;TEXT-DECORATION:underline;}
#yiv1617265202 SPAN.MsoHyperlinkFollowed {
COLOR:purple;TEXT-DECORATION:underline;}
#yiv1617265202 SPAN.EmailStyle17 {
FONT-WEIGHT:normal;COLOR:windowtext;FONT-STYLE:normal;FONT-FAMILY:Verdana;TEXT-DECORATION:none;}
#yiv1617265202 DIV.Section1 {
}
#yiv1617265202 UNKNOWN {
FONT-SIZE:10pt;}
#yiv1617265202 BLOCKQUOTE {
MARGIN-TOP:0px;MARGIN-BOTTOM:0px;MARGIN-LEFT:2em;}
#yiv1617265202 OL {
MARGIN-TOP:0px;MARGIN-BOTTOM:0px;}
#yiv1617265202 UL {
MARGIN-TOP:0px;MARGIN-BOTTOM:0px;}
there are 2 RS pro with ar9220
interface.
wlan0?????IEEE?802.11abgn??ESSID:"test"??
??????????Mode:Ad-Hoc??Frequency:2.427?GHz??Cell:?26:56:B1:2A:08:9C???
??????????Tx-Power=20?dBm???
??????????RTS?thr:off???Fragment?thr:off
??????????Encryption?key:off
??????????Power?Management:off
?
node 2:
wlan0?????IEEE?802.11abgn??ESSID:"test"??
??????????Mode:Ad-Hoc??Frequency:2.427?GHz??Cell:?26:56:B1:2A:08:9C???
??????????Tx-Power=20?dBm???
??????????RTS?thr:off???Fragment?thr:off
??????????Encryption?key:off
??????????Power?Management:off
?
But the result of iperf is
root at OpenWrt:/#?iperf?-c?192.168.11.10?-i?5?-t?500
------------------------------------------------------------
Client?connecting?to?192.168.11.10,?TCP?port?5001
TCP?window?size:?16.0?KByte?(default)
------------------------------------------------------------
[??3]?local?192.168.11.20?port?51512?connected?with?192.168.11.10?port?5001
[?ID]?Interval???????Transfer?????Bandwidth
[??3]??0.0-?5.0?sec??10.3?MBytes??17.4?Mbits/sec
[?ID]?Interval???????Transfer?????Bandwidth
[??3]??5.0-10.0?sec??9.36?MBytes??15.7?Mbits/sec
[?ID]?Interval???????Transfer?????Bandwidth
[??3]?10.0-15.0?sec??9.08?MBytes??15.2?Mbits/sec
?
?
May I miss something?
?
?
2010-03-03
???? Pavel Roskin
????? 2010-03-03? 12:01:45
???? hongjianli.nudt
??? ath9k-devel
??? Re: [ath9k-devel] Ubnt rs
pro ar9220 ath9k driver
On?Tue,?2010-03-02?at?23:56?+0800,?hongjianli.nudt at gmail.com?wrote:
>?Hi?list,
>?I'm?using?the?UBNT?RS?pro?with?ar9220?interface.?Is?there?anyone?to
>?run?it?in?802.11n?mode??or?give?me?some?hints,?Thank?you!
I?tested?Ubiquti?SR71-12?in?802.11n?mode?with?no?problems.??It's?also
AR9220?based.
It's?better?that?you?describe?the?problem?rather?than?look?for?somebody
who?has?exactly?the?same?hardware?and?knows?what?you?are?talking?about.
--?
Regards,
Pavel?Roskin
-----Inline Attachment Follows-----
_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100303/598e3c21/attachment.htm
^ permalink raw reply [flat|nested] 11+ messages in thread* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-03 14:24 ` xxiao
@ 2010-03-03 14:30 ` hongjianli.nudt
2010-03-03 17:59 ` Pavel Roskin
0 siblings, 1 reply; 11+ messages in thread
From: hongjianli.nudt @ 2010-03-03 14:30 UTC (permalink / raw)
To: ath9k-devel
Thank you for your reply.
But I can't config it in AP mode.
root at OpenWrt:/# iw dev wlan0 set type ap
See http://wireless.kernel.org/RTFM-AP.
and how do I config it in AP mode? (RS pro and ar9220 chipset)
2010-03-03
???? xxiao
????? 2010-03-03 22:25:00
???? ath9k-devel; hongjianli.nudt
???
??? Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
You're running ad-hoc mode, I have never seen that supports 11N HT speed, though you can easily get 11n/HT under AP/STA scenario.
xxiao
--- On Wed, 3/3/10, hongjianli.nudt at gmail.com <hongjianli.nudt@gmail.com> wrote:
From: hongjianli.nudt@gmail.com <hongjianli.nudt@gmail.com>
Subject: Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
To: "ath9k-devel" <ath9k-devel@lists.ath9k.org>
Date: Wednesday, March 3, 2010, 1:07 AM
there are 2 RS pro with ar9220 interface.
wlan0 IEEE 802.11abgn ESSID:"test"
Mode:Ad-Hoc Frequency:2.427 GHz Cell: 26:56:B1:2A:08:9C
Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
node 2:
wlan0 IEEE 802.11abgn ESSID:"test"
Mode:Ad-Hoc Frequency:2.427 GHz Cell: 26:56:B1:2A:08:9C
Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
But the result of iperf is
root at OpenWrt:/# iperf -c 192.168.11.10 -i 5 -t 500
------------------------------------------------------------
Client connecting to 192.168.11.10, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.11.20 port 51512 connected with 192.168.11.10 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 5.0 sec 10.3 MBytes 17.4 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 5.0-10.0 sec 9.36 MBytes 15.7 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 10.0-15.0 sec 9.08 MBytes 15.2 Mbits/sec
May I miss something?
2010-03-03
???? Pavel Roskin
????? 2010-03-03 12:01:45
???? hongjianli.nudt
??? ath9k-devel
??? Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
On Tue, 2010-03-02 at 23:56 +0800, hongjianli.nudt at gmail.com wrote:
> Hi list,
> I'm using the UBNT RS pro with ar9220 interface. Is there anyone to
> run it in 802.11n mode? or give me some hints, Thank you!
I tested Ubiquti SR71-12 in 802.11n mode with no problems. It's also
AR9220 based.
It's better that you describe the problem rather than look for somebody
who has exactly the same hardware and knows what you are talking about.
--
Regards,
Pavel Roskin
-----Inline Attachment Follows-----
_______________________________________________
ath9k-devel mailing list
ath9k-devel at lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100303/0177481a/attachment-0001.htm
^ permalink raw reply [flat|nested] 11+ messages in thread* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-03 14:30 ` hongjianli.nudt
@ 2010-03-03 17:59 ` Pavel Roskin
2010-03-04 0:55 ` Luis R. Rodriguez
2010-03-04 7:06 ` hongjianli.nudt
0 siblings, 2 replies; 11+ messages in thread
From: Pavel Roskin @ 2010-03-03 17:59 UTC (permalink / raw)
To: ath9k-devel
On Wed, 2010-03-03 at 22:30 +0800, =?utf-8?B??= wrote:
> ?
> Thank you for your reply.
> But I can't config it in AP mode.
> root at OpenWrt:/# iw dev wlan0 set type ap
> See http://wireless.kernel.org/RTFM-AP.
>
> and how do I config it in AP mode? (RS pro and ar9220 chipset)
Use hostapd. You'll need to enable 802.11n in the hostapd configuration
file.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-03 17:59 ` Pavel Roskin
@ 2010-03-04 0:55 ` Luis R. Rodriguez
2010-03-05 5:37 ` Pavel Roskin
2010-03-04 7:06 ` hongjianli.nudt
1 sibling, 1 reply; 11+ messages in thread
From: Luis R. Rodriguez @ 2010-03-04 0:55 UTC (permalink / raw)
To: ath9k-devel
On Wed, Mar 03, 2010 at 09:59:31AM -0800, Pavel Roskin wrote:
> On Wed, 2010-03-03 at 22:30 +0800, =?utf-8?B??= wrote:
> > ?
> > Thank you for your reply.
> > But I can't config it in AP mode.
> > root at OpenWrt:/# iw dev wlan0 set type ap
> > See http://wireless.kernel.org/RTFM-AP.
> >
> > and how do I config it in AP mode? (RS pro and ar9220 chipset)
>
> Use hostapd. You'll need to enable 802.11n in the hostapd configuration
> file.
Please read:
http://wireless.kernel.org/en/users/Documentation/hostapd
People who have worked hard on documentation would appreciate
if its spread.
Luis
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-04 0:55 ` Luis R. Rodriguez
@ 2010-03-05 5:37 ` Pavel Roskin
2010-03-05 5:39 ` Luis R. Rodriguez
0 siblings, 1 reply; 11+ messages in thread
From: Pavel Roskin @ 2010-03-05 5:37 UTC (permalink / raw)
To: ath9k-devel
On Wed, 2010-03-03 at 16:55 -0800, Luis R. Rodriguez wrote:
> On Wed, Mar 03, 2010 at 09:59:31AM -0800, Pavel Roskin wrote:
> > On Wed, 2010-03-03 at 22:30 +0800, =?utf-8?B??= wrote:
> > > ?
> > > Thank you for your reply.
> > > But I can't config it in AP mode.
> > > root at OpenWrt:/# iw dev wlan0 set type ap
> > > See http://wireless.kernel.org/RTFM-AP.
> > >
> > > and how do I config it in AP mode? (RS pro and ar9220 chipset)
> >
> > Use hostapd. You'll need to enable 802.11n in the hostapd configuration
> > file.
>
> Please read:
>
> http://wireless.kernel.org/en/users/Documentation/hostapd
>
> People who have worked hard on documentation would appreciate
> if its spread.
Actually, the former link redirect to the later. Unfortunately, that
page is titled "hostapd Linux documentation page", so that users are not
told explicitly that they should run hostapd. Instead, they are
directed to a page that they may consider irrelevant to the problem.
I would prefer if http://wireless.kernel.org/RTFM-AP was a short page
saying that hostapd must be used with mac80211 based drivers even if WPA
is not used.
Also, I would prefer that we phase out the "RTFM", as it may be
offensive to some users. It would be much nicer to say "please use
hostapd to set AP mode".
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-05 5:37 ` Pavel Roskin
@ 2010-03-05 5:39 ` Luis R. Rodriguez
0 siblings, 0 replies; 11+ messages in thread
From: Luis R. Rodriguez @ 2010-03-05 5:39 UTC (permalink / raw)
To: ath9k-devel
On Thu, Mar 4, 2010 at 9:37 PM, Pavel Roskin <proski@gnu.org> wrote:
> On Wed, 2010-03-03 at 16:55 -0800, Luis R. Rodriguez wrote:
>> On Wed, Mar 03, 2010 at 09:59:31AM -0800, Pavel Roskin wrote:
>> > On Wed, 2010-03-03 at 22:30 +0800, =?utf-8?B??= wrote:
>> > > ?
>> > > Thank you for your reply.
>> > > But I can't config it in AP mode.
>> > > root at OpenWrt:/# iw dev wlan0 set type ap
>> > > See http://wireless.kernel.org/RTFM-AP.
>> > >
>> > > and how do I config it in AP mode? (RS pro and ar9220 chipset)
>> >
>> > Use hostapd. ?You'll need to enable 802.11n in the hostapd configuration
>> > file.
>>
>> Please read:
>>
>> http://wireless.kernel.org/en/users/Documentation/hostapd
>>
>> People who have worked hard on documentation would appreciate
>> if its spread.
>
> Actually, the former link redirect to the later. ?Unfortunately, that
> page is titled "hostapd Linux documentation page", so that users are not
> told explicitly that they should run hostapd. ?Instead, they are
> directed to a page that they may consider irrelevant to the problem.
>
> I would prefer if http://wireless.kernel.org/RTFM-AP was a short page
> saying that hostapd must be used with mac80211 based drivers even if WPA
> is not used.
>
> Also, I would prefer that we phase out the "RTFM", as it may be
> offensive to some users. ?It would be much nicer to say "please use
> hostapd to set AP mode".
I think the RTFM is hard coded on iw :)
Luis
^ permalink raw reply [flat|nested] 11+ messages in thread
* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-03 17:59 ` Pavel Roskin
2010-03-04 0:55 ` Luis R. Rodriguez
@ 2010-03-04 7:06 ` hongjianli.nudt
2010-03-04 7:20 ` hongjianli.nudt
1 sibling, 1 reply; 11+ messages in thread
From: hongjianli.nudt @ 2010-03-04 7:06 UTC (permalink / raw)
To: ath9k-devel
Thank you. I have do it successful. I can associate with the ap. but the speed is still low.
ap:
iwconfig:
wlan0 IEEE 802.11abgn Mode:Master Frequency:2.437 GHz Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Power Management:off
mon.wlan0 IEEE 802.11abgn Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Power Management:off
hostapd.conf
interface=wlan0
driver=nl80211
ssid=mytest
hw_mode=g
channel=6
ieee80211n=1
ht_capab=[HT40-][SHORT-GT-40][DSSS_CCK-40]
macaddr_acl=0
#auth_algs=1
#ignore_broadcast_ssid=0
#wpa=2
#wpa_passphrase=lihongjian
#wpa_key_mgmt=WPA-PSK
#wpa_pairwise=TKIP
#rsn_pairwise=CCMP
station:channel 6,11g
wlan0 IEEE 802.11abgn ESSID:"mytest"
Mode:Managed Frequency:2.437 GHz Access Point: 00:80:48:68:06:A7
Bit Rate=11 Mb/s Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-34 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root at OpenWrt:/# iperf -c 192.168.11.1 -i 5 -t 600
------------------------------------------------------------
Client connecting to 192.168.11.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.11.121 port 47226 connected with 192.168.11.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 5.0 sec 3.43 MBytes 5.75 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 5.0-10.0 sec 3.52 MBytes 5.91 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 10.0-15.0 sec 3.07 MBytes 5.15 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 15.0-20.0 sec 3.47 MBytes 5.82 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 20.0-25.0 sec 3.45 MBytes 5.78 Mbits/sec
And if I run ap and station in 11a mode with 5GHz, the speed is about 200~300kbps.
how do I find my problem?
2010-03-04
???? Luis R. Rodriguez
????? 2010-03-04 08:55:55
???? Pavel Roskin
??? hongjianli.nudt at gmail.com; ath9k-devel
??? Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
On Wed, Mar 03, 2010 at 09:59:31AM -0800, Pavel Roskin wrote:
> On Wed, 2010-03-03 at 22:30 +0800, =?utf-8?B??= wrote:
> > ?
> > Thank you for your reply.
> > But I can't config it in AP mode.
> > root at OpenWrt:/# iw dev wlan0 set type ap
> > See http://wireless.kernel.org/RTFM-AP.
> >
> > and how do I config it in AP mode? (RS pro and ar9220 chipset)
>
> Use hostapd. You'll need to enable 802.11n in the hostapd configuration
> file.
Please read:
http://wireless.kernel.org/en/users/Documentation/hostapd
People who have worked hard on documentation would appreciate
if its spread.
Luis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100304/fe4b6a85/attachment-0001.htm
^ permalink raw reply [flat|nested] 11+ messages in thread* [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
2010-03-04 7:06 ` hongjianli.nudt
@ 2010-03-04 7:20 ` hongjianli.nudt
0 siblings, 0 replies; 11+ messages in thread
From: hongjianli.nudt @ 2010-03-04 7:20 UTC (permalink / raw)
To: ath9k-devel
How to change the parameter of Bit Rate of station?
2010-03-04
????
????? 2010-03-04 15:06:21
???? Luis R. Rodriguez; Pavel Roskin
??? hongjianli.nudt at gmail.com; ath9k-devel
??? Re: Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
Thank you. I have do it successful. I can associate with the ap. but the speed is still low.
ap:
iwconfig:
wlan0 IEEE 802.11abgn Mode:Master Frequency:2.437 GHz Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Power Management:off
mon.wlan0 IEEE 802.11abgn Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Power Management:off
hostapd.conf
interface=wlan0
driver=nl80211
ssid=mytest
hw_mode=g
channel=6
ieee80211n=1
ht_capab=[HT40-][SHORT-GT-40][DSSS_CCK-40]
macaddr_acl=0
#auth_algs=1
#ignore_broadcast_ssid=0
#wpa=2
#wpa_passphrase=lihongjian
#wpa_key_mgmt=WPA-PSK
#wpa_pairwise=TKIP
#rsn_pairwise=CCMP
station:channel 6,11g
wlan0 IEEE 802.11abgn ESSID:"mytest"
Mode:Managed Frequency:2.437 GHz Access Point: 00:80:48:68:06:A7
Bit Rate=11 Mb/s Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-34 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
root at OpenWrt:/# iperf -c 192.168.11.1 -i 5 -t 600
------------------------------------------------------------
Client connecting to 192.168.11.1, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.11.121 port 47226 connected with 192.168.11.1 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 5.0 sec 3.43 MBytes 5.75 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 5.0-10.0 sec 3.52 MBytes 5.91 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 10.0-15.0 sec 3.07 MBytes 5.15 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 15.0-20.0 sec 3.47 MBytes 5.82 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 3] 20.0-25.0 sec 3.45 MBytes 5.78 Mbits/sec
And if I run ap and station in 11a mode with 5GHz, the speed is about 200~300kbps.
how do I find my problem?
2010-03-04
???? Luis R. Rodriguez
????? 2010-03-04 08:55:55
???? Pavel Roskin
??? hongjianli.nudt at gmail.com; ath9k-devel
??? Re: [ath9k-devel] Ubnt rs pro ar9220 ath9k driver
On Wed, Mar 03, 2010 at 09:59:31AM -0800, Pavel Roskin wrote:
> On Wed, 2010-03-03 at 22:30 +0800, =?utf-8?B??= wrote:
> > ?
> > Thank you for your reply.
> > But I can't config it in AP mode.
> > root at OpenWrt:/# iw dev wlan0 set type ap
> > See http://wireless.kernel.org/RTFM-AP.
> >
> > and how do I config it in AP mode? (RS pro and ar9220 chipset)
>
> Use hostapd. You'll need to enable 802.11n in the hostapd configuration
> file.
Please read:
http://wireless.kernel.org/en/users/Documentation/hostapd
People who have worked hard on documentation would appreciate
if its spread.
Luis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20100304/c72073c4/attachment.htm
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2010-03-05 5:39 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-02 15:56 [ath9k-devel] Ubnt rs pro ar9220 ath9k driver hongjianli.nudt at gmail.com
2010-03-03 4:01 ` Pavel Roskin
2010-03-03 7:07 ` hongjianli.nudt at gmail.com
2010-03-03 14:24 ` xxiao
2010-03-03 14:30 ` hongjianli.nudt
2010-03-03 17:59 ` Pavel Roskin
2010-03-04 0:55 ` Luis R. Rodriguez
2010-03-05 5:37 ` Pavel Roskin
2010-03-05 5:39 ` Luis R. Rodriguez
2010-03-04 7:06 ` hongjianli.nudt
2010-03-04 7:20 ` hongjianli.nudt
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.