Re: [PATCH v7 0/5] Add mipi dsi support for rk3288

[Archit Taneja <architt@codeaurora.org>]

Hi,

On 01/06/2016 09:33 AM, Chris Zhong wrote:
>
> The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
> IP. This series adds support for a Synopsys DesignWare MIPI DSI host
> controller DRM driver.
>
> The MIPI DSI feature is tested on rk3288 evb board, backport them to
> chrome os kernel chrome_v3.14, and it can display normally.
>
> This patchset is base on the patchset from Ying.liu@freescale.com.
> <http://www.spinics.net/lists/dri-devel/msg77181.html>
>
> According to the suggestion from Thierry, I have get rid of the bridge,
> and register the encoder & connecter in drm/rockchip/dw-mipi-dsi.c.

I've raised this question too late, but what was the reason to not
implement the DSI block as a bridge driver?

The drm/hisilicon IP seems to use a very similar DSI Designware IP (the
register offsets seems to be the same). There is a good potential of
re-use here by different kms drivers here the way it's already done for
DW HDMI and the analogix DP driver that's in review process.

Archit

> After backport below patches from linux-next, I can merge this serial into
> Dave's drm-next branch.
>
> 94d5d6a0fbf3 clk: rockchip: add an id for rk3288 crypto clk
> c6d49fbcfcc4 clk: rockchip: add id for mipidsi sclk on rk3288
> a2f4c560f18e clk: rockchip: add mipidsi clock on rk3288
> 69c923743640 ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846
> 662513a14c9d ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846
> b04061e6599b ARM: dts: rockchip: move the public part to rk3288-evb common
>
>
> Changes in v7:
> - modify the config to tristate for modules build (Mark Yao)
> - Pass NULL 'name' to drm_encoder_init() to fix compile err (Mark Yao)
> - Move the lcd_en control to act8846 dts
>
> Changes in v6:
> - update the document, since the bridge device has been deleted.
> - move the mipi_en gate to ockchip_drm_crtc_mode_config
> - Remove the atomic feature check (Mark Yao)
> - Add atomic API support (Heiko Stübne)
> - Do not use bridge driver (Thierry Reding)
> - Optimization the phy init sequence
>
> Changes in v5:
> - modify the clk name to SCLK_MIPIDSI_24M
> - add a blank line befor lcd_en
>
> Changes in v4:
> - use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
>
> Changes in v3:
> - move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
>
> Chris Zhong (5):
>    drm/rockchip: return a true clock rate to adjusted_mode
>    Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
>    drm: rockchip: Support Synopsys DW MIPI DSI
>    ARM: dts: rockchip: add rk3288 mipi_dsi nodes
>    ARM: dts: rockchip: add support mipi panel tv080wum-nl0
>
>   .../display/rockchip/dw_mipi_dsi_rockchip.txt      |   60 +
>   arch/arm/boot/dts/rk3288-evb-act8846.dts           |    2 +
>   arch/arm/boot/dts/rk3288-evb.dtsi                  |   12 +-
>   arch/arm/boot/dts/rk3288.dtsi                      |   39 +
>   drivers/gpu/drm/rockchip/Kconfig                   |   10 +
>   drivers/gpu/drm/rockchip/Makefile                  |    1 +
>   drivers/gpu/drm/rockchip/dw-mipi-dsi.c             | 1196 ++++++++++++++++++++
>   drivers/gpu/drm/rockchip/rockchip_drm_vop.c        |    8 +
>   8 files changed, 1327 insertions(+), 1 deletion(-)
>   create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
>   create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum, hosted by The Linux Foundation
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel