From: arno@natisbad.org (Arnaud Ebalard)
To: Simon Guinot <simon.guinot@sequanux.org>
Cc: Andrew Lunn <andrew@lunn.ch>,
Russell King - ARM Linux <linux@arm.linux.org.uk>,
Jason Cooper <jason@lakedaemon.net>,
linux-doc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
Olivier Mouchet <olivier.mouchet@gmail.com>,
Rob Herring <rob.herring@calxeda.com>,
lm-sensors@lm-sensors.org,
Grant Likely <grant.likely@secretlab.ca>,
Guenter Roeck <linux@roeck-us.net>, Rob Landley <rob@landley.net>,
Jean Delvare <khali@linux-fr.org>,
Linux ARM Kernel Mailing List
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [lm-sensors] [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller
Date: Wed, 24 Apr 2013 10:50:12 +0000 [thread overview]
Message-ID: <87ehe06w4b.fsf@natisbad.org> (raw)
In-Reply-To: <20130424100458.GA17771@kw.sim.vm.gnt> (Simon Guinot's message of "Wed, 24 Apr 2013 12:04:59 +0200")
Hi Simon,
Simon Guinot <simon.guinot@sequanux.org> writes:
>> It can be used if the default params (or those configured by u-boot I
>> guess) fit your needs. I think it would be fairly easy to extend the
>> driver later to expose g762_config struct to allow parameters to be set
>> w/o using OF. If someone wants to do that, I think it is better to not
>> depend on OF in Kconfig at the moment but I have not strong argument
>> other that that one. I'll let you decide.
>
> A g762 device is embedded on the 2Big Network v2 board (net2big_v2),
> which is not DT compliant. Then, I think it could be nice to allow
> device registration from board setup files.
ok, I will try and provide that for v2 then. :-)
Cheers,
a+
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: arno@natisbad.org (Arnaud Ebalard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller
Date: Wed, 24 Apr 2013 12:50:12 +0200 [thread overview]
Message-ID: <87ehe06w4b.fsf@natisbad.org> (raw)
In-Reply-To: <20130424100458.GA17771@kw.sim.vm.gnt> (Simon Guinot's message of "Wed, 24 Apr 2013 12:04:59 +0200")
Hi Simon,
Simon Guinot <simon.guinot@sequanux.org> writes:
>> It can be used if the default params (or those configured by u-boot I
>> guess) fit your needs. I think it would be fairly easy to extend the
>> driver later to expose g762_config struct to allow parameters to be set
>> w/o using OF. If someone wants to do that, I think it is better to not
>> depend on OF in Kconfig at the moment but I have not strong argument
>> other that that one. I'll let you decide.
>
> A g762 device is embedded on the 2Big Network v2 board (net2big_v2),
> which is not DT compliant. Then, I think it could be nice to allow
> device registration from board setup files.
ok, I will try and provide that for v2 then. :-)
Cheers,
a+
WARNING: multiple messages have this Message-ID (diff)
From: arno@natisbad.org (Arnaud Ebalard)
To: Simon Guinot <simon.guinot@sequanux.org>
Cc: Andrew Lunn <andrew@lunn.ch>,
Russell King - ARM Linux <linux@arm.linux.org.uk>,
Jason Cooper <jason@lakedaemon.net>,
linux-doc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
Olivier Mouchet <olivier.mouchet@gmail.com>,
Rob Herring <rob.herring@calxeda.com>,
lm-sensors@lm-sensors.org,
Grant Likely <grant.likely@secretlab.ca>,
Guenter Roeck <linux@roeck-us.net>, Rob Landley <rob@landley.net>,
Jean Delvare <khali@linux-fr.org>,
Linux ARM Kernel Mailing List
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 PWM fan controller
Date: Wed, 24 Apr 2013 12:50:12 +0200 [thread overview]
Message-ID: <87ehe06w4b.fsf@natisbad.org> (raw)
In-Reply-To: <20130424100458.GA17771@kw.sim.vm.gnt> (Simon Guinot's message of "Wed, 24 Apr 2013 12:04:59 +0200")
Hi Simon,
Simon Guinot <simon.guinot@sequanux.org> writes:
>> It can be used if the default params (or those configured by u-boot I
>> guess) fit your needs. I think it would be fairly easy to extend the
>> driver later to expose g762_config struct to allow parameters to be set
>> w/o using OF. If someone wants to do that, I think it is better to not
>> depend on OF in Kconfig at the moment but I have not strong argument
>> other that that one. I'll let you decide.
>
> A g762 device is embedded on the 2Big Network v2 board (net2big_v2),
> which is not DT compliant. Then, I think it could be nice to allow
> device registration from board setup files.
ok, I will try and provide that for v2 then. :-)
Cheers,
a+
next prev parent reply other threads:[~2013-04-24 10:50 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-18 22:27 [lm-sensors] [RFC, PATCHv0 0/3] Add support for GMT G762/G763 PWM fan controller Arnaud Ebalard
2013-04-18 22:27 ` [RFC,PATCHv0 " Arnaud Ebalard
2013-04-18 22:27 ` Arnaud Ebalard
2013-04-18 22:28 ` [lm-sensors] [PATCH 1/3] Add support for GMT G72/G763 " Arnaud Ebalard
2013-04-18 22:28 ` Arnaud Ebalard
2013-04-18 22:28 ` Arnaud Ebalard
2013-04-19 4:35 ` [lm-sensors] " Guenter Roeck
2013-04-19 4:35 ` Guenter Roeck
2013-04-19 4:35 ` Guenter Roeck
2013-04-19 5:34 ` [lm-sensors] " Arnaud Ebalard
2013-04-19 5:34 ` Arnaud Ebalard
2013-04-19 5:34 ` Arnaud Ebalard
2013-04-23 22:05 ` [lm-sensors] [PATCHv1 0/3] hwmon: " Arnaud Ebalard
2013-04-23 22:05 ` Arnaud Ebalard
2013-04-23 22:05 ` Arnaud Ebalard
2013-04-23 22:05 ` [lm-sensors] [PATCHv1 1/3] hwmon: Add support for GMT G762/G763 " Arnaud Ebalard
2013-04-23 22:05 ` Arnaud Ebalard
2013-04-23 22:05 ` Arnaud Ebalard
2013-04-24 5:37 ` [lm-sensors] " Andrew Lunn
2013-04-24 5:37 ` Andrew Lunn
2013-04-24 5:37 ` Andrew Lunn
2013-04-24 9:06 ` [lm-sensors] " Arnaud Ebalard
2013-04-24 9:06 ` Arnaud Ebalard
2013-04-24 9:06 ` Arnaud Ebalard
2013-04-24 10:04 ` [lm-sensors] " Simon Guinot
2013-04-24 10:04 ` Simon Guinot
2013-04-24 10:04 ` Simon Guinot
2013-04-24 10:50 ` Arnaud Ebalard [this message]
2013-04-24 10:50 ` Arnaud Ebalard
2013-04-24 10:50 ` Arnaud Ebalard
2013-04-24 13:38 ` [lm-sensors] " Guenter Roeck
2013-04-24 13:38 ` Guenter Roeck
2013-04-24 13:38 ` Guenter Roeck
2013-04-24 20:28 ` [lm-sensors] " Arnaud Ebalard
2013-04-24 20:28 ` Arnaud Ebalard
2013-04-24 20:28 ` Arnaud Ebalard
2013-04-24 22:47 ` [lm-sensors] " Guenter Roeck
2013-04-24 22:47 ` Guenter Roeck
2013-04-24 22:47 ` Guenter Roeck
2013-04-25 10:14 ` [lm-sensors] " Simon Guinot
2013-04-25 10:14 ` Simon Guinot
2013-04-25 10:14 ` Simon Guinot
2013-04-24 17:06 ` [lm-sensors] " Simon Guinot
2013-04-24 17:06 ` Simon Guinot
2013-04-24 17:06 ` Simon Guinot
2013-04-24 23:37 ` [lm-sensors] " Guenter Roeck
2013-04-24 23:37 ` Guenter Roeck
2013-04-24 23:37 ` Guenter Roeck
2013-04-25 9:58 ` [lm-sensors] " Simon Guinot
2013-04-25 9:58 ` Simon Guinot
2013-04-25 9:58 ` Simon Guinot
2013-04-27 14:03 ` [lm-sensors] " Simon Guinot
2013-04-27 14:03 ` Simon Guinot
2013-04-27 14:03 ` Simon Guinot
2013-04-27 14:12 ` [lm-sensors] " Jean Delvare
2013-04-27 14:12 ` Jean Delvare
2013-04-27 14:12 ` Jean Delvare
2013-04-27 16:56 ` [lm-sensors] " Guenter Roeck
2013-04-27 16:56 ` Guenter Roeck
2013-04-27 16:56 ` Guenter Roeck
2013-04-27 18:55 ` [lm-sensors] " Arnaud Ebalard
2013-04-27 18:55 ` Arnaud Ebalard
2013-04-27 18:55 ` Arnaud Ebalard
2013-04-23 22:06 ` [lm-sensors] [PATCHv1 2/3] hwmon: Add documentation for g762 driver Arnaud Ebalard
2013-04-23 22:06 ` Arnaud Ebalard
2013-04-23 22:06 ` Arnaud Ebalard
2013-04-24 17:32 ` [lm-sensors] " Guenter Roeck
2013-04-24 17:32 ` Guenter Roeck
2013-04-24 17:32 ` Guenter Roeck
2013-04-24 20:33 ` [lm-sensors] " Arnaud Ebalard
2013-04-24 20:33 ` Arnaud Ebalard
2013-04-24 20:33 ` Arnaud Ebalard
2013-04-23 22:06 ` [lm-sensors] [PATCHv1 3/3] hwmon: Add DT " Arnaud Ebalard
2013-04-23 22:06 ` Arnaud Ebalard
2013-04-23 22:06 ` Arnaud Ebalard
2013-04-23 22:23 ` [lm-sensors] " Jason Cooper
2013-04-23 22:23 ` Jason Cooper
2013-04-23 22:23 ` Jason Cooper
2013-04-24 5:43 ` [lm-sensors] " Arnaud Ebalard
2013-04-24 5:43 ` Arnaud Ebalard
2013-04-24 5:43 ` Arnaud Ebalard
2013-04-19 5:50 ` [lm-sensors] [PATCH 1/3] Add support for GMT G72/G763 PWM fan controller Andrew Lunn
2013-04-19 5:50 ` Andrew Lunn
2013-04-19 5:50 ` Andrew Lunn
2013-04-19 11:30 ` [lm-sensors] " Arnaud Ebalard
2013-04-19 11:30 ` Arnaud Ebalard
2013-04-19 11:30 ` Arnaud Ebalard
2013-04-19 13:37 ` [lm-sensors] " Guenter Roeck
2013-04-19 13:37 ` Guenter Roeck
2013-04-19 13:37 ` Guenter Roeck
2013-04-19 6:05 ` [lm-sensors] " Jean Delvare
2013-04-19 6:05 ` Jean Delvare
2013-04-19 6:05 ` Jean Delvare
2013-04-19 11:31 ` [lm-sensors] " Arnaud Ebalard
2013-04-19 11:31 ` Arnaud Ebalard
2013-04-19 11:31 ` Arnaud Ebalard
2013-04-18 22:28 ` [lm-sensors] [RFC, PATCHv0 2/3] Add DT documentation for G762 " Arnaud Ebalard
2013-04-18 22:28 ` [RFC,PATCHv0 " Arnaud Ebalard
2013-04-18 22:28 ` Arnaud Ebalard
2013-04-18 22:28 ` [lm-sensors] [PATCH 3/3] Add documentation for g762 driver Arnaud Ebalard
2013-04-18 22:28 ` Arnaud Ebalard
2013-04-18 22:28 ` Arnaud Ebalard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ehe06w4b.fsf@natisbad.org \
--to=arno@natisbad.org \
--cc=andrew@lunn.ch \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=jason@lakedaemon.net \
--cc=khali@linux-fr.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=olivier.mouchet@gmail.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=simon.guinot@sequanux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.