[Buildroot] [PATCH v2 1/8] package/mpd: bump to version 0.19

[Buildroot] [PATCH v2 1/8] package/mpd: bump to version 0.19

[Jörg Krause]

* Bump to version 0.19
* Add boost as dependency
* Add support for libicu

Signed-off-by: J?rg Krause <jkrause@posteo.de>
---
Changes v1 -> v2:
  - fix missing dependency of boost
---
 package/mpd/Config.in |  4 +++-
 package/mpd/mpd.mk    | 14 +++++++++++---
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/package/mpd/Config.in b/package/mpd/Config.in
index 8884464..f2dbbb0 100644
--- a/package/mpd/Config.in
+++ b/package/mpd/Config.in
@@ -1,12 +1,14 @@
 menuconfig BR2_PACKAGE_MPD
 	bool "mpd"
 	depends on BR2_INSTALL_LIBSTDCPP
+	depends on BR2_LARGEFILE # boost
 	depends on BR2_USE_WCHAR # libglib2, flac
 	depends on BR2_TOOLCHAIN_HAS_THREADS # libglib2
 	depends on BR2_USE_MMU # libglib2
 	# avr32, sparc & CS powerpc gcc are too old
 	depends on !(BR2_avr32 || BR2_sparc)
 	depends on !(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103 || BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009)
+	select BR2_PACKAGE_BOOST
 	select BR2_PACKAGE_LIBGLIB2
 	select BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
 	select BR2_PACKAGE_MPD_TREMOR if !(BR2_PACKAGE_MPD_MAD || BR2_PACKAGE_MPD_MPG123 || BR2_PACKAGE_MPD_VORBIS || BR2_PACKAGE_MPD_WAVPACK || BR2_PACKAGE_MPD_FLAC || BR2_PACKAGE_MPD_MUSEPACK || BR2_PACKAGE_MPD_FFMPEG)
@@ -211,4 +213,4 @@ comment "mpd needs a toolchain w/ C++, threads, wchar"
 	depends on BR2_USE_MMU
 	depends on !(BR2_avr32 || BR2_sparc)
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
-		!BR2_TOOLCHAIN_HAS_THREADS
+		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_LARGEFILE
diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk
index 932df08..1542338 100644
--- a/package/mpd/mpd.mk
+++ b/package/mpd/mpd.mk
@@ -4,11 +4,11 @@
 #
 ################################################################################
 
-MPD_VERSION_MAJOR = 0.18
-MPD_VERSION = $(MPD_VERSION_MAJOR).16
+MPD_VERSION_MAJOR = 0.19
+MPD_VERSION = $(MPD_VERSION_MAJOR)
 MPD_SOURCE = mpd-$(MPD_VERSION).tar.xz
 MPD_SITE = http://www.musicpd.org/download/mpd/$(MPD_VERSION_MAJOR)
-MPD_DEPENDENCIES = host-pkgconf libglib2
+MPD_DEPENDENCIES = host-pkgconf boost libglib2
 MPD_LICENSE = GPLv2+
 MPD_LICENSE_FILES = COPYING
 
@@ -19,6 +19,14 @@ else
 MPD_CONF_OPTS += --with-zeroconf=no
 endif
 
+# MPD prefers libicu for utf8 collation instead of libglib2.
+ifeq ($(BR2_PACKAGE_ICU),y)
+MPD_DEPENDENCIES += icu
+MPD_CONF_OPTS += --enable-icu
+else
+MPD_CONF_OPTS += --disable-icu
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_ALSA),y)
 MPD_DEPENDENCIES += alsa-lib
 MPD_CONF_OPTS += --enable-alsa
-- 
2.1.2

[Buildroot] [PATCH v2 2/8] package/mpd: sort plugins by type in Config.in

[Jörg Krause]

Signed-off-by: J?rg Krause <jkrause@posteo.de>
---
Changes v1 -> v2:
  - fix dependency in comment
---
 package/mpd/Config.in | 215 ++++++++++++++++++++++++++------------------------
 1 file changed, 114 insertions(+), 101 deletions(-)

diff --git a/package/mpd/Config.in b/package/mpd/Config.in
index f2dbbb0..10f3cf0 100644
--- a/package/mpd/Config.in
+++ b/package/mpd/Config.in
@@ -22,65 +22,45 @@ menuconfig BR2_PACKAGE_MPD
 
 if BR2_PACKAGE_MPD
 
-config BR2_PACKAGE_MPD_ALSA
-	bool "alsa"
-	default y
-	select BR2_PACKAGE_ALSA_LIB
-	select BR2_PACKAGE_ALSA_LIB_PCM
-	select BR2_PACKAGE_ALSA_LIB_MIXER
-	help
-	  Enable alsa output support.
+comment "Archive plugins"
 
-config BR2_PACKAGE_MPD_AO
-	bool "ao"
-	select BR2_PACKAGE_LIBAO
-	help
-	  Enable libao output support.
-
-config BR2_PACKAGE_MPD_AUDIOFILE
-	bool "audiofile"
-	select BR2_PACKAGE_AUDIOFILE
+config BR2_PACKAGE_MPD_BZIP2
+	bool "bzip2"
+	select BR2_PACKAGE_BZIP2
 	help
-	  Enable audiofile input/streaming support.
-	  Select this if you want to play back WAV files.
+		Enable bzip2 archive support.
 
-config BR2_PACKAGE_MPD_PULSEAUDIO
-	bool "pulseaudio"
-	depends on BR2_LARGEFILE # pulseaudio -> libsndfile
-	depends on BR2_ARCH_HAS_ATOMICS # pulseaudio
-	select BR2_PACKAGE_PULSEAUDIO
+config BR2_PACKAGE_MPD_SQLITE
+	bool "sqlite"
+	select BR2_PACKAGE_SQLITE
 	help
-	  Enable pulseaudio output support.
+		Enable sqlite database support.
+		If you don't use sqlite it will use an ASCII database.
 
-comment "pulseaudio support needs a toolchain w/ largefile"
-	depends on BR2_ARCH_HAS_ATOMICS
-	depends on !BR2_LARGEFILE
+comment "Converter plugins"
 
-config BR2_PACKAGE_MPD_BZIP2
-	bool "bzip2"
-	select BR2_PACKAGE_BZIP2
+config BR2_PACKAGE_MPD_LIBSAMPLERATE
+	bool "libsamplerate"
+	select BR2_PACKAGE_LIBSAMPLERATE
 	help
-	  Enable bzip2 archive support.
+		Enable libsamplerate input support.
+		Select this for software sample rate conversion.
 
-config BR2_PACKAGE_MPD_CURL
-	bool "curl"
-	select BR2_PACKAGE_LIBCURL
+comment "Decoder plugins"
+
+config BR2_PACKAGE_MPD_AUDIOFILE
+	bool "audiofile"
+	select BR2_PACKAGE_AUDIOFILE
 	help
-	  Enable curl streaming (http) support.
+		Enable audiofile input/streaming support.
+		Select this if you want to play back WAV files.
 
 config BR2_PACKAGE_MPD_FAAD2
 	bool "faad2"
 	select BR2_PACKAGE_FAAD2
 	help
-	  Enable faad2 input support.
-	  Select this if you want to play back MP4/AAC files.
-
-config BR2_PACKAGE_MPD_FLAC
-	bool "flac"
-	select BR2_PACKAGE_FLAC
-	help
-	  Enable flac input/streaming support.
-	  Select this if you want to play back FLAC files.
+		Enable faad2 input support.
+		Select this if you want to play back MP4/AAC files.
 
 config BR2_PACKAGE_MPD_FFMPEG
 	bool "ffmpeg"
@@ -88,32 +68,26 @@ config BR2_PACKAGE_MPD_FFMPEG
 	depends on BR2_LARGEFILE
 	depends on BR2_INET_IPV6
 	help
-	  Enable ffmpeg input support.
-	  Select this if you want to play back files supported by ffmpeg.
+		Enable ffmpeg input support.
+		Select this if you want to play back files supported by ffmpeg.
 
 comment "ffmpeg support needs a toolchain w/ largefile, IPv6"
 	depends on !(BR2_LARGEFILE && BR2_INET_IPV6)
 
-config BR2_PACKAGE_MPD_LAME
-	bool "lame"
-	select BR2_PACKAGE_LAME
-	help
-	  Enable lame (mp3) encoding support.
-
-config BR2_PACKAGE_MPD_LIBSAMPLERATE
-	bool "libsamplerate"
-	select BR2_PACKAGE_LIBSAMPLERATE
+config BR2_PACKAGE_MPD_FLAC
+	bool "flac"
+	select BR2_PACKAGE_FLAC
 	help
-	  Enable libsamplerate input support.
-	  Select this for software sample rate conversion.
+		Enable flac input/streaming support.
+		Select this if you want to play back FLAC files.
 
 config BR2_PACKAGE_MPD_LIBSNDFILE
 	bool "libsndfile"
 	select BR2_PACKAGE_LIBSNDFILE
 	depends on BR2_LARGEFILE
 	help
-	  Enable libsndfile input/streaming support.
-	  Select this if you want to play back WAV files.
+		Enable libsndfile input/streaming support.
+		Select this if you want to play back WAV files.
 
 comment "libsndfile support needs a toolchain w/ largefile"
 	depends on !BR2_LARGEFILE
@@ -124,16 +98,16 @@ config BR2_PACKAGE_MPD_MAD
 	select BR2_PACKAGE_LIBID3TAG
 	select BR2_PACKAGE_LIBMAD
 	help
-	  Enable mad input support.
-	  Select this if you want to play back MP3 files.
+		Enable mad input support.
+		Select this if you want to play back MP3 files.
 
 config BR2_PACKAGE_MPD_MPG123
 	bool "mpg123"
 	select BR2_PACKAGE_LIBID3TAG
 	select BR2_PACKAGE_MPG123
 	help
-	  Enable mpg123 input support.
-	  Select this if you want to play back MP3 files.
+		Enable mpg123 input support.
+		Select this if you want to play back MP3 files.
 
 config BR2_PACKAGE_MPD_MUSEPACK
 	bool "musepack"
@@ -141,72 +115,111 @@ config BR2_PACKAGE_MPD_MUSEPACK
 	select BR2_PACKAGE_LIBREPLAYGAIN
 	select BR2_PACKAGE_MUSEPACK
 	help
-	  Enable musepack input support.
-	  Select this if you want to play back MPC files.
+		Enable musepack input support.
+		Select this if you want to play back MPC files.
 
 config BR2_PACKAGE_MPD_OPUS
 	bool "opus"
 	select BR2_PACKAGE_OPUS
 	select BR2_PACKAGE_LIBOGG
 	help
-	  Enable opus input support.
-	  Select this if you want to play back OPUS encoded files.
+		Enable opus input support.
+		Select this if you want to play back OPUS encoded files.
 
-config BR2_PACKAGE_MPD_SOUNDCLOUD
-	bool "soundcloud"
-	select BR2_PACKAGE_YAJL
+config BR2_PACKAGE_MPD_TREMOR
+	bool "tremor"
+	select BR2_PACKAGE_LIBOGG
+	select BR2_PACKAGE_TREMOR
 	help
-	  Enable soundcloud.com playlist support.
+		Enable vorbis input support.
+		Select this if you want to play back OGG files on softfloat targets.
 
-config BR2_PACKAGE_MPD_SQLITE
-	bool "sqlite"
-	select BR2_PACKAGE_SQLITE
+config BR2_PACKAGE_MPD_VORBIS
+	bool "vorbis"
+	select BR2_PACKAGE_LIBOGG
+	select BR2_PACKAGE_LIBVORBIS
 	help
-	  Enable sqlite database support.
-	  If you don't use sqlite it will use an ASCII database.
+		Enable vorbis input/streaming support.
+		Select this if you want to play back OGG files on hardfloat targets.
 
-config BR2_PACKAGE_MPD_TCP
-	bool "tcp sockets"
-	default y
+config BR2_PACKAGE_MPD_WAVPACK
+	bool "wavpack"
+	select BR2_PACKAGE_WAVPACK
 	help
-	  Enable mpd to listen on tcp sockets.
+		Enable wavpack input support.
+		Select this if you want to play back WV files.
 
-	  You want this on if mpd and the client(s) work
-	  on different machines (the usual scenario).
+comment "Encoder plugins"
 
-config BR2_PACKAGE_MPD_TREMOR
-	bool "tremor"
-	select BR2_PACKAGE_LIBOGG
-	select BR2_PACKAGE_TREMOR
+config BR2_PACKAGE_MPD_LAME
+	bool "lame"
+	select BR2_PACKAGE_LAME
 	help
-	  Enable vorbis input support.
-	  Select this if you want to play back OGG files on softfloat targets.
+		Enable lame (mp3) encoding support.
 
 config BR2_PACKAGE_MPD_TWOLAME
 	bool "twolame"
 	depends on BR2_LARGEFILE # twolame -> libsndfile
 	select BR2_PACKAGE_TWOLAME
 	help
-	  Enable TwoLAME mp2 encoding.
+		Enable TwoLAME mp2 encoding.
 
 comment "twolame support needs a toolchain w/ largefile"
 	depends on !BR2_LARGEFILE
 
-config BR2_PACKAGE_MPD_VORBIS
-	bool "vorbis"
-	select BR2_PACKAGE_LIBOGG
-	select BR2_PACKAGE_LIBVORBIS
+comment "Input plugins"
+
+config BR2_PACKAGE_MPD_CURL
+	bool "curl"
+	select BR2_PACKAGE_LIBCURL
 	help
-	  Enable vorbis input/streaming support.
-	  Select this if you want to play back OGG files on hardfloat targets.
+		Enable curl streaming (http) support.
 
-config BR2_PACKAGE_MPD_WAVPACK
-	bool "wavpack"
-	select BR2_PACKAGE_WAVPACK
+config BR2_PACKAGE_MPD_SOUNDCLOUD
+	bool "soundcloud"
+	select BR2_PACKAGE_YAJL
+	help
+		Enable soundcloud.com playlist support.
+
+comment "Output plugins"
+
+config BR2_PACKAGE_MPD_ALSA
+	bool "alsa"
+	default y
+	select BR2_PACKAGE_ALSA_LIB
+	select BR2_PACKAGE_ALSA_LIB_PCM
+	select BR2_PACKAGE_ALSA_LIB_MIXER
+	help
+		Enable alsa output support.
+
+config BR2_PACKAGE_MPD_AO
+	bool "ao"
+	select BR2_PACKAGE_LIBAO
+	help
+		Enable libao output support.
+
+config BR2_PACKAGE_MPD_PULSEAUDIO
+	bool "pulseaudio"
+	depends on BR2_LARGEFILE # pulseaudio -> libsndfile
+	depends on BR2_ARCH_HAS_ATOMICS # pulseaudio
+	select BR2_PACKAGE_PULSEAUDIO
+	help
+		Enable pulseaudio output support.
+
+comment "pulseaudio support needs a toolchain w/ largefile"
+	depends on BR2_ARCH_HAS_ATOMICS
+	depends on !BR2_LARGEFILE
+
+comment "Miscellaneous plugins"
+
+config BR2_PACKAGE_MPD_TCP
+	bool "tcp sockets"
+	default y
 	help
-	  Enable wavpack input support.
-	  Select this if you want to play back WV files.
+		Enable mpd to listen on tcp sockets.
 
+		You want this on if mpd and the client(s) work
+		on different machines (the usual scenario).
 endif
 
 comment "mpd needs a toolchain w/ C++, threads, wchar"
-- 
2.1.2

[Buildroot] [PATCH v2 3/8] package/mpd: sort plugins alphabetically in mpd.mk

[Jörg Krause]

Signed-off-by: J?rg Krause <jkrause@posteo.de>
---
Changes v1 -> v2:
  - none
---
 package/mpd/mpd.mk | 70 +++++++++++++++++++++++++++---------------------------
 1 file changed, 35 insertions(+), 35 deletions(-)

diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk
index 1542338..b10a60a 100644
--- a/package/mpd/mpd.mk
+++ b/package/mpd/mpd.mk
@@ -48,13 +48,6 @@ else
 MPD_CONF_OPTS += --disable-audiofile
 endif
 
-ifeq ($(BR2_PACKAGE_MPD_PULSEAUDIO),y)
-MPD_DEPENDENCIES += pulseaudio
-MPD_CONF_OPTS += --enable-pulse
-else
-MPD_CONF_OPTS += --disable-pulse
-endif
-
 ifeq ($(BR2_PACKAGE_MPD_BZIP2),y)
 MPD_DEPENDENCIES += bzip2
 MPD_CONF_OPTS += --enable-bzip2
@@ -62,6 +55,13 @@ else
 MPD_CONF_OPTS += --disable-bzip2
 endif
 
+ifeq ($(BR2_PACKAGE_MPD_CURL),y)
+MPD_DEPENDENCIES += libcurl
+MPD_CONF_OPTS += --enable-curl
+else
+MPD_CONF_OPTS += --disable-curl
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_FAAD2),y)
 MPD_DEPENDENCIES += faad2
 MPD_CONF_OPTS += --enable-aac
@@ -69,6 +69,13 @@ else
 MPD_CONF_OPTS += --disable-aac
 endif
 
+ifeq ($(BR2_PACKAGE_MPD_FFMPEG),y)
+MPD_DEPENDENCIES += ffmpeg
+MPD_CONF_OPTS += --enable-ffmpeg
+else
+MPD_CONF_OPTS += --disable-ffmpeg
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_FLAC),y)
 MPD_DEPENDENCIES += flac
 MPD_CONF_OPTS += --enable-flac
@@ -76,13 +83,6 @@ else
 MPD_CONF_OPTS += --disable-flac
 endif
 
-ifeq ($(BR2_PACKAGE_MPD_CURL),y)
-MPD_DEPENDENCIES += libcurl
-MPD_CONF_OPTS += --enable-curl
-else
-MPD_CONF_OPTS += --disable-curl
-endif
-
 ifeq ($(BR2_PACKAGE_MPD_LAME),y)
 MPD_DEPENDENCIES += lame
 MPD_CONF_OPTS += --enable-lame-encoder
@@ -104,20 +104,6 @@ else
 MPD_CONF_OPTS += --disable-sndfile
 endif
 
-ifeq ($(BR2_PACKAGE_MPD_OPUS),y)
-MPD_DEPENDENCIES += opus libogg
-MPD_CONF_OPTS += --enable-opus
-else
-MPD_CONF_OPTS += --disable-opus
-endif
-
-ifeq ($(BR2_PACKAGE_MPD_VORBIS),y)
-MPD_DEPENDENCIES += libvorbis
-MPD_CONF_OPTS += --enable-vorbis --enable-vorbis-encoder
-else
-MPD_CONF_OPTS += --disable-vorbis --disable-vorbis-encoder
-endif
-
 ifeq ($(BR2_PACKAGE_MPD_MAD),y)
 MPD_DEPENDENCIES += libid3tag libmad
 MPD_CONF_OPTS += --enable-mad
@@ -139,6 +125,20 @@ else
 MPD_CONF_OPTS += --disable-mpc
 endif
 
+ifeq ($(BR2_PACKAGE_MPD_OPUS),y)
+MPD_DEPENDENCIES += opus libogg
+MPD_CONF_OPTS += --enable-opus
+else
+MPD_CONF_OPTS += --disable-opus
+endif
+
+ifeq ($(BR2_PACKAGE_MPD_PULSEAUDIO),y)
+MPD_DEPENDENCIES += pulseaudio
+MPD_CONF_OPTS += --enable-pulse
+else
+MPD_CONF_OPTS += --disable-pulse
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_SOUNDCLOUD),y)
 MPD_DEPENDENCIES += yajl
 MPD_CONF_OPTS += --enable-soundcloud
@@ -169,6 +169,13 @@ else
 MPD_CONF_OPTS += --disable-twolame-encoder
 endif
 
+ifeq ($(BR2_PACKAGE_MPD_VORBIS),y)
+MPD_DEPENDENCIES += libvorbis
+MPD_CONF_OPTS += --enable-vorbis --enable-vorbis-encoder
+else
+MPD_CONF_OPTS += --disable-vorbis --disable-vorbis-encoder
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_WAVPACK),y)
 MPD_DEPENDENCIES += wavpack
 MPD_CONF_OPTS += --enable-wavpack
@@ -176,13 +183,6 @@ else
 MPD_CONF_OPTS += --disable-wavpack
 endif
 
-ifeq ($(BR2_PACKAGE_MPD_FFMPEG),y)
-MPD_DEPENDENCIES += ffmpeg
-MPD_CONF_OPTS += --enable-ffmpeg
-else
-MPD_CONF_OPTS += --disable-ffmpeg
-endif
-
 define MPD_INSTALL_EXTRA_FILES
 	@if [ ! -f $(TARGET_DIR)/etc/mpd.conf ]; then \
 		$(INSTALL) -D package/mpd/mpd.conf \
-- 
2.1.2

[Buildroot] [PATCH v2 4/8] package/mpd: enable support for libsoxr

[Jörg Krause]

Signed-off-by: J?rg Krause <jkrause@posteo.de>
---
Changes v1 -> v2:
  - none
---
 package/mpd/Config.in | 7 +++++++
 package/mpd/mpd.mk    | 7 +++++++
 2 files changed, 14 insertions(+)

diff --git a/package/mpd/Config.in b/package/mpd/Config.in
index 10f3cf0..eba280a 100644
--- a/package/mpd/Config.in
+++ b/package/mpd/Config.in
@@ -46,6 +46,13 @@ config BR2_PACKAGE_MPD_LIBSAMPLERATE
 		Enable libsamplerate input support.
 		Select this for software sample rate conversion.
 
+config BR2_PACKAGE_MPD_LIBSOXR
+	bool "libsoxr"
+	select BR2_PACKAGE_LIBSOXR
+	help
+		Enable libsoxr resampler support.
+		The SoX Resampler library performs software sample-rate conversion.
+
 comment "Decoder plugins"
 
 config BR2_PACKAGE_MPD_AUDIOFILE
diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk
index b10a60a..92d7292 100644
--- a/package/mpd/mpd.mk
+++ b/package/mpd/mpd.mk
@@ -104,6 +104,13 @@ else
 MPD_CONF_OPTS += --disable-sndfile
 endif
 
+ifeq ($(BR2_PACKAGE_MPD_LIBSOXR),y)
+MPD_DEPENDENCIES += libsoxr
+MPD_CONF_OPTS += --enable-soxr
+else
+MPD_CONF_OPTS += --disable-soxr
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_MAD),y)
 MPD_DEPENDENCIES += libid3tag libmad
 MPD_CONF_OPTS += --enable-mad
-- 
2.1.2

[Buildroot] [PATCH v2 5/8] package/mpd: enable support for libsmbclient

[Jörg Krause]

Signed-off-by: J?rg Krause <jkrause@posteo.de>
---
Changes v1 -> v2:
  - none
---
 package/mpd/Config.in | 8 ++++++++
 package/mpd/mpd.mk    | 7 +++++++
 2 files changed, 15 insertions(+)

diff --git a/package/mpd/Config.in b/package/mpd/Config.in
index eba280a..b188da3 100644
--- a/package/mpd/Config.in
+++ b/package/mpd/Config.in
@@ -182,6 +182,14 @@ config BR2_PACKAGE_MPD_CURL
 	help
 		Enable curl streaming (http) support.
 
+config BR2_PACKAGE_MPD_LIBSMBCLIENT
+	bool "samba"
+	depends on !BR2_nios2 # samba
+	select BR2_PACKAGE_SAMBA
+	select BR2_PACKAGE_SAMBA_LIBSMBCLIENT
+	help
+		Enable Samba support.
+
 config BR2_PACKAGE_MPD_SOUNDCLOUD
 	bool "soundcloud"
 	select BR2_PACKAGE_YAJL
diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk
index 92d7292..ecd2a77 100644
--- a/package/mpd/mpd.mk
+++ b/package/mpd/mpd.mk
@@ -90,6 +90,13 @@ else
 MPD_CONF_OPTS += --disable-lame-encoder
 endif
 
+ifeq ($(BR2_PACKAGE_MPD_LIBSMBCLIENT),y)
+MPD_DEPENDENCIES += samba
+MPD_CONF_OPTS += --enable-smbclient
+else
+MPD_CONF_OPTS += --disable-smbclient
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_LIBSAMPLERATE),y)
 MPD_DEPENDENCIES += libsamplerate
 MPD_CONF_OPTS += --enable-lsr
-- 
2.1.2

[Buildroot] [PATCH v2 6/8] package/mpd: enable support for libnfs

[Jörg Krause]

Signed-off-by: J?rg Krause <jkrause@posteo.de>
---
Changes v1 -> v2:
  - none
---
 package/mpd/Config.in | 7 +++++++
 package/mpd/mpd.mk    | 8 ++++++++
 2 files changed, 15 insertions(+)

diff --git a/package/mpd/Config.in b/package/mpd/Config.in
index b188da3..54c023c 100644
--- a/package/mpd/Config.in
+++ b/package/mpd/Config.in
@@ -182,6 +182,13 @@ config BR2_PACKAGE_MPD_CURL
 	help
 		Enable curl streaming (http) support.
 
+config BR2_PACKAGE_MPD_LIBNFS
+	bool "nfs"
+	depends on BR2_TOOLCHAIN_HAS_NATIVE_RPC
+	select BR2_PACKAGE_LIBNFS
+	help
+		Enable Network File System (NFS) support.
+
 config BR2_PACKAGE_MPD_LIBSMBCLIENT
 	bool "samba"
 	depends on !BR2_nios2 # samba
diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk
index ecd2a77..476bf0a 100644
--- a/package/mpd/mpd.mk
+++ b/package/mpd/mpd.mk
@@ -90,6 +90,14 @@ else
 MPD_CONF_OPTS += --disable-lame-encoder
 endif
 
+ifeq ($(BR2_PACKAGE_MPD_LIBNFS),y)
+PKG_CONFIG_PATH = "$(STAGING_DIR)/usr/lib/pkgconfig"
+MPD_DEPENDENCIES += libnfs
+MPD_CONF_OPTS += --enable-nfs
+else
+MPD_CONF_OPTS += --disable-nfs
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_LIBSMBCLIENT),y)
 MPD_DEPENDENCIES += samba
 MPD_CONF_OPTS += --enable-smbclient
-- 
2.1.2

[Buildroot] [PATCH v2 7/8] package/mpd: enable support for dsd

[Jörg Krause]

Signed-off-by: J?rg Krause <jkrause@posteo.de>
---
Changes v1 -> v2:
  - none
---
 package/mpd/Config.in | 6 ++++++
 package/mpd/mpd.mk    | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/package/mpd/Config.in b/package/mpd/Config.in
index 54c023c..f40b3d4 100644
--- a/package/mpd/Config.in
+++ b/package/mpd/Config.in
@@ -62,6 +62,12 @@ config BR2_PACKAGE_MPD_AUDIOFILE
 		Enable audiofile input/streaming support.
 		Select this if you want to play back WAV files.
 
+config BR2_PACKAGE_MPD_DSD
+	bool "dsd"
+	help
+		Enable Digital Speech Decoder (DSD) support to play audio files encoded
+		in a digital speech format.
+
 config BR2_PACKAGE_MPD_FAAD2
 	bool "faad2"
 	select BR2_PACKAGE_FAAD2
diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk
index 476bf0a..3370bc7 100644
--- a/package/mpd/mpd.mk
+++ b/package/mpd/mpd.mk
@@ -62,6 +62,12 @@ else
 MPD_CONF_OPTS += --disable-curl
 endif
 
+ifeq ($(BR2_PACKAGE_MPD_DSD),y)
+MPD_CONF_OPTS += --enable-dsd
+else
+MPD_CONF_OPTS += --disable-dsd
+endif
+
 ifeq ($(BR2_PACKAGE_MPD_FAAD2),y)
 MPD_DEPENDENCIES += faad2
 MPD_CONF_OPTS += --enable-aac
-- 
2.1.2

[Buildroot] [PATCH v2 8/8] package/mpd: fix zeroconf support

[Jörg Krause]

Support for zeroconf depends on libdns_sd from avahi. This library is build 
by avahi if avahi-daemon is enabled and dbus is selected.

Checking for symbol BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY instead of 
BR2_PACKAGE_AVAHI_DAEMON ensures that dbus has been selected and therefore 
libdns_sd has been built.

Signed-off-by: J?rg Krause <jkrause@posteo.de>
---
Changes v1 -> v2:
  - none
---
 package/mpd/mpd.mk | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/package/mpd/mpd.mk b/package/mpd/mpd.mk
index 3370bc7..a0d582c 100644
--- a/package/mpd/mpd.mk
+++ b/package/mpd/mpd.mk
@@ -13,7 +13,9 @@ MPD_LICENSE = GPLv2+
 MPD_LICENSE_FILES = COPYING
 
 # Some options need an explicit --disable or --enable
-ifeq ($(BR2_PACKAGE_AVAHI_DAEMON),y)
+
+# Zeroconf support depends on libdns_sd from avahi.
+ifeq ($(BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY),y)
 MPD_DEPENDENCIES += avahi
 else
 MPD_CONF_OPTS += --with-zeroconf=no
-- 
2.1.2

[Buildroot] [PATCH v2 4/8] package/mpd: enable support for libsoxr

[Thomas Petazzoni]

Dear J?rg Krause,

On Wed, 15 Oct 2014 15:18:50 +0200, J?rg Krause wrote:
> Signed-off-by: J?rg Krause <jkrause@posteo.de>
> ---
> Changes v1 -> v2:
>   - none
> ---
>  package/mpd/Config.in | 7 +++++++
>  package/mpd/mpd.mk    | 7 +++++++
>  2 files changed, 14 insertions(+)
> 
> diff --git a/package/mpd/Config.in b/package/mpd/Config.in
> index 10f3cf0..eba280a 100644
> --- a/package/mpd/Config.in
> +++ b/package/mpd/Config.in
> @@ -46,6 +46,13 @@ config BR2_PACKAGE_MPD_LIBSAMPLERATE
>  		Enable libsamplerate input support.
>  		Select this for software sample rate conversion.
>  
> +config BR2_PACKAGE_MPD_LIBSOXR
> +	bool "libsoxr"
> +	select BR2_PACKAGE_LIBSOXR
> +	help
> +		Enable libsoxr resampler support.
> +		The SoX Resampler library performs software sample-rate conversion.
> +

I apologize for the silly comment, but the indentation is wrong here.
The help text should be indented with one tab plus two spaces, not two
tabs.

Same issue applies to patches 4, 5, 6 and 7 of your series.

Thanks,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v2 6/8] package/mpd: enable support for libnfs

[Thomas Petazzoni]

Dear J?rg Krause,

On Wed, 15 Oct 2014 15:18:52 +0200, J?rg Krause wrote:

> +ifeq ($(BR2_PACKAGE_MPD_LIBNFS),y)
> +PKG_CONFIG_PATH = "$(STAGING_DIR)/usr/lib/pkgconfig"

This looks wrong, for two reasons:

 *) A package is not allowed to change global variables. Remember that
    the namespace of variables in global, so if one package is changing
    a global variable, this change is visible to all other packages.

 *) $(STAGING_DIR)/usr/lib/pkgconfig is already the default search path
    for our pkg-config, so there should be no need to make this tuning.
    Which problem have you seen?

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v2 8/8] package/mpd: fix zeroconf support

[Thomas Petazzoni]

Dear J?rg Krause,

On Wed, 15 Oct 2014 15:18:54 +0200, J?rg Krause wrote:

>  # Some options need an explicit --disable or --enable
> -ifeq ($(BR2_PACKAGE_AVAHI_DAEMON),y)
> +
> +# Zeroconf support depends on libdns_sd from avahi.
> +ifeq ($(BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY),y)
>  MPD_DEPENDENCIES += avahi
>  else
>  MPD_CONF_OPTS += --with-zeroconf=no

It doesn't seem really obvious for the user that
BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY should be enabled to get avahi
support in mpd. So, in such situations, I would suggest to add a
Config.in option to explicitly enable the Avahi support in mpd:

config BR2_PACKAGE_MPD_AVAHI_SUPPORT
	bool "avahi support"
	depends on ... # all the dependencies of avahi
	select BR2_PACKAGE_AVAHI
	select BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY
	help
	  Some help text

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[Buildroot] [PATCH v2 4/8] package/mpd: enable support for libsoxr

[Jörg Krause]

Dear Thomas Petazzoni,

On 10/16/2014 11:33 AM, Thomas Petazzoni wrote:
> Dear J?rg Krause,
>
> On Wed, 15 Oct 2014 15:18:50 +0200, J?rg Krause wrote:
>> Signed-off-by: J?rg Krause <jkrause@posteo.de>
>> ---
>> Changes v1 -> v2:
>>    - none
>> ---
>>   package/mpd/Config.in | 7 +++++++
>>   package/mpd/mpd.mk    | 7 +++++++
>>   2 files changed, 14 insertions(+)
>>
>> diff --git a/package/mpd/Config.in b/package/mpd/Config.in
>> index 10f3cf0..eba280a 100644
>> --- a/package/mpd/Config.in
>> +++ b/package/mpd/Config.in
>> @@ -46,6 +46,13 @@ config BR2_PACKAGE_MPD_LIBSAMPLERATE
>>   		Enable libsamplerate input support.
>>   		Select this for software sample rate conversion.
>>   
>> +config BR2_PACKAGE_MPD_LIBSOXR
>> +	bool "libsoxr"
>> +	select BR2_PACKAGE_LIBSOXR
>> +	help
>> +		Enable libsoxr resampler support.
>> +		The SoX Resampler library performs software sample-rate conversion.
>> +
> I apologize for the silly comment, but the indentation is wrong here.
> The help text should be indented with one tab plus two spaces, not two
> tabs.
>
> Same issue applies to patches 4, 5, 6 and 7 of your series.

Don't apologize, every comment is very welcome!

Yes, the intendation is wrong for almost all existing help texts in mpd. 
I will fix the submitted patches and add an additional one to fix the 
intendation of the existing help texts.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20141016/86daba78/attachment.html>

[Buildroot] [PATCH v2 6/8] package/mpd: enable support for libnfs

[Jörg Krause]

Dear Thomas Petazzoni,

On 10/16/2014 11:44 AM, Thomas Petazzoni wrote:
> Dear J?rg Krause,
>
> On Wed, 15 Oct 2014 15:18:52 +0200, J?rg Krause wrote:
>
>> +ifeq ($(BR2_PACKAGE_MPD_LIBNFS),y)
>> +PKG_CONFIG_PATH = "$(STAGING_DIR)/usr/lib/pkgconfig"
> This looks wrong, for two reasons:
>
>   *) A package is not allowed to change global variables. Remember that
>      the namespace of variables in global, so if one package is changing
>      a global variable, this change is visible to all other packages.

I have seens this at wpa_supplicant which use it if package dbus is 
selected:

    ifeq ($(BR2_PACKAGE_DBUS),y)
         WPA_SUPPLICANT_DEPENDENCIES += host-pkgconf dbus
         WPA_SUPPLICANT_MAKE_ENV = \
             PKG_CONFIG_SYSROOT_DIR="$(STAGING_DIR)"    \
             PKG_CONFIG_PATH="$(STAGING_DIR)/usr/lib/pkgconfig"

I copied the last line here. Okay, I see now the difference: 
wpa_supplicant sets it locally to the make environment and I set it 
globally.

>   *) $(STAGING_DIR)/usr/lib/pkgconfig is already the default search path
>      for our pkg-config, so there should be no need to make this tuning.
>      Which problem have you seen?

Without this mpd configuration check does not find libnfs although it is 
build successfully.

    checking for NFS... no
    configure: error: NFS input plugin: libnfs not found

Maybe I should do this?:
     MPD_MAKE_ENV = PKG_CONFIG_PATH="$(STAGING_DIR)/usr/lib/pkgconfig"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20141016/81225d83/attachment.html>

[Buildroot] [PATCH v2 8/8] package/mpd: fix zeroconf support

[Jörg Krause]

Dear Thomas Petazzoni,

On 10/16/2014 11:50 AM, Thomas Petazzoni wrote:
> Dear J?rg Krause,
>
> On Wed, 15 Oct 2014 15:18:54 +0200, J?rg Krause wrote:
>
>>   # Some options need an explicit --disable or --enable
>> -ifeq ($(BR2_PACKAGE_AVAHI_DAEMON),y)
>> +
>> +# Zeroconf support depends on libdns_sd from avahi.
>> +ifeq ($(BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY),y)
>>   MPD_DEPENDENCIES += avahi
>>   else
>>   MPD_CONF_OPTS += --with-zeroconf=no
> It doesn't seem really obvious for the user that
> BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY should be enabled to get avahi
> support in mpd. So, in such situations, I would suggest to add a
> Config.in option to explicitly enable the Avahi support in mpd:
>
> config BR2_PACKAGE_MPD_AVAHI_SUPPORT
> 	bool "avahi support"
> 	depends on ... # all the dependencies of avahi
> 	select BR2_PACKAGE_AVAHI
> 	select BR2_PACKAGE_AVAHI_LIBDNSSD_COMPATIBILITY
> 	help
> 	  Some help text

Looks good!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20141016/a1d76809/attachment-0001.html>

[Buildroot] [PATCH v2 6/8] package/mpd: enable support for libnfs

[Arnout Vandecappelle]

On 16/10/14 12:57, J?rg Krause wrote:
> Dear Thomas Petazzoni,
> 
> On 10/16/2014 11:44 AM, Thomas Petazzoni wrote:
>> Dear J?rg Krause,
[snip]
>>  *) $(STAGING_DIR)/usr/lib/pkgconfig is already the default search path
>>     for our pkg-config, so there should be no need to make this tuning.
>>     Which problem have you seen?
> 
> Without this mpd configuration check does not find libnfs although it is build
> successfully.
> 
>     checking for NFS... no
>     configure: error: NFS input plugin: libnfs not found

 Actually, we set PKG_CONFIG_LIBDIR to this directory, and PKG_CONFIG_PATH takes
precedence over PKG_CONFIG_LIBDIR. I have no idea why we do it that way... But
it means that if the package sets PKG_CONFIG_PATH to /usr/lib/pkg-config, it
will override our setting.

> 
> Maybe I should do this?:
>     MPD_MAKE_ENV = PKG_CONFIG_PATH="$(STAGING_DIR)/usr/lib/pkgconfig"

 That looks better, indeed. Except, it should probably be MPD_CONF_ENV.


 Regards,
 Arnout

-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

[Buildroot] [PATCH v2 6/8] package/mpd: enable support for libnfs

[Jörg Krause]

On 10/18/2014 12:15 AM, Arnout Vandecappelle wrote:
> On 16/10/14 12:57, J?rg Krause wrote:
>> Dear Thomas Petazzoni,
>>
>> On 10/16/2014 11:44 AM, Thomas Petazzoni wrote:
>>> Dear J?rg Krause,
> [snip]
>>>   *) $(STAGING_DIR)/usr/lib/pkgconfig is already the default search path
>>>      for our pkg-config, so there should be no need to make this tuning.
>>>      Which problem have you seen?
>> Without this mpd configuration check does not find libnfs although it is build
>> successfully.
>>
>>      checking for NFS... no
>>      configure: error: NFS input plugin: libnfs not found
>   Actually, we set PKG_CONFIG_LIBDIR to this directory, and PKG_CONFIG_PATH takes
> precedence over PKG_CONFIG_LIBDIR. I have no idea why we do it that way... But
> it means that if the package sets PKG_CONFIG_PATH to /usr/lib/pkg-config, it
> will override our setting.

You're right! The problem is that in version 1.8.0 of libnfs the 
following is set in libnfs.pc.in:

    -Requires.private: @LIBNFS_PC_REQ_PRIVATE@

This is fixed by an upstream patch after the release 1.8.0:
https://github.com/sahlberg/libnfs/commit/d47c989d886e5398143d43d3b6d25fdf7210cb11

>> Maybe I should do this?:
>>      MPD_MAKE_ENV = PKG_CONFIG_PATH="$(STAGING_DIR)/usr/lib/pkgconfig"
>   That looks better, indeed. Except, it should probably be MPD_CONF_ENV.
>

Not necessary anymore, bumping to version 1.9.5 solved this issue:
http://git.buildroot.net/buildroot/commit/?id=28b163f3162c91afaed1e5c5c59d10d18cfa7dbc

Best regards
J?rg Krause
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20141018/e2f9e97a/attachment.html>