From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>, dri-devel@lists.freedesktop.org
Subject: Re: [PATCHv3 27/30] drm/omap: dispc: improve debug print of display flags
Date: Wed, 29 Mar 2017 12:00:45 +0300 [thread overview]
Message-ID: <1699678.sT0gvRgBUH@avalon> (raw)
In-Reply-To: <1490706496-4959-28-git-send-email-tomi.valkeinen@ti.com>
Hi Tomi,
Thank you for the patch.
On Tuesday 28 Mar 2017 16:08:13 Tomi Valkeinen wrote:
> Instead of printing 0/1 for display flags like vsync high/low, use a
> tri-state print (-1/0/1) to indicate the "undefined" state.
Even better would be to use high/low/unknown (or H/L/U or any similar set of
values).
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/gpu/drm/omapdrm/dss/dispc.c | 20 +++++++++++++++-----
> 1 file changed, 15 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c
> b/drivers/gpu/drm/omapdrm/dss/dispc.c index 83241052df6b..2e6a71dbc25d
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dispc.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
> @@ -3229,6 +3229,16 @@ static void _dispc_mgr_set_lcd_timings(enum
> omap_channel channel, }
> }
>
> +static int vm_flag_to_int(enum display_flags flags, enum display_flags
> high, + enum display_flags low)
> +{
> + if (flags & high)
> + return 1;
> + if (flags & low)
> + return -1;
> + return 0;
> +}
> +
> /* change name to mode? */
> static void dispc_mgr_set_timings(enum omap_channel channel,
> const struct videomode *vm)
> @@ -3258,11 +3268,11 @@ static void dispc_mgr_set_timings(enum omap_channel
> channel, t.hsync_len, t.hfront_porch, t.hback_porch,
> t.vsync_len, t.vfront_porch, t.vback_porch);
> DSSDBG("vsync_level %d hsync_level %d data_pclk_edge %d
de_level %d
> sync_pclk_edge %d\n", - !!(t.flags &
DISPLAY_FLAGS_VSYNC_HIGH),
> - !!(t.flags & DISPLAY_FLAGS_HSYNC_HIGH),
> - !!(t.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE),
> - !!(t.flags & DISPLAY_FLAGS_DE_HIGH),
> - !!(t.flags & DISPLAY_FLAGS_SYNC_POSEDGE));
> + vm_flag_to_int(t.flags, DISPLAY_FLAGS_VSYNC_HIGH,
> DISPLAY_FLAGS_VSYNC_LOW), + vm_flag_to_int(t.flags,
> DISPLAY_FLAGS_HSYNC_HIGH, DISPLAY_FLAGS_HSYNC_LOW),
> + vm_flag_to_int(t.flags, DISPLAY_FLAGS_PIXDATA_POSEDGE,
> DISPLAY_FLAGS_PIXDATA_NEGEDGE), +
vm_flag_to_int(t.flags,
> DISPLAY_FLAGS_DE_HIGH, DISPLAY_FLAGS_DE_LOW), +
vm_flag_to_int(t.flags,
> DISPLAY_FLAGS_SYNC_POSEDGE, DISPLAY_FLAGS_SYNC_NEGEDGE));
>
> DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
> } else {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-03-29 9:00 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-28 13:07 [PATCHv3 00/30] drm/omap: miscallaneous improvements Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 01/30] drm/omap: work-around for errata i886 Tomi Valkeinen
2017-03-29 8:00 ` Laurent Pinchart
2017-03-28 13:07 ` [PATCHv3 02/30] drm/omap: refactor CRTC HW property setup Tomi Valkeinen
2017-03-29 8:05 ` Laurent Pinchart
2017-03-29 8:12 ` Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 03/30] drm/omap: remove divider constraint from hsdiv Tomi Valkeinen
2017-03-29 8:09 ` Laurent Pinchart
2017-03-28 13:07 ` [PATCHv3 04/30] drm/omap: decrease min width & height Tomi Valkeinen
2017-03-29 8:13 ` Laurent Pinchart
2017-03-29 8:23 ` Tomi Valkeinen
2017-03-29 8:24 ` Laurent Pinchart
2017-03-29 8:26 ` Tomi Valkeinen
2017-03-29 8:30 ` Laurent Pinchart
2017-03-29 8:43 ` Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 05/30] drm/omap: improve DPI clock selection on DRA7xx Tomi Valkeinen
2017-03-29 8:19 ` Laurent Pinchart
2017-03-29 8:36 ` Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 06/30] drm/omap: Add support for render nodes Tomi Valkeinen
2017-03-29 8:22 ` Laurent Pinchart
2017-03-29 8:58 ` Tomi Valkeinen
2017-03-29 12:20 ` Laurent Pinchart
2017-03-29 12:51 ` David Herrmann
2017-03-29 21:42 ` Laurent Pinchart
2017-03-30 6:44 ` David Herrmann
2017-03-30 7:43 ` Daniel Vetter
2017-03-28 13:07 ` [PATCHv3 07/30] drm/omap: fix HDMI sync polarities Tomi Valkeinen
2017-03-29 8:26 ` Laurent Pinchart
2017-03-28 13:07 ` [PATCHv3 08/30] drm/omap: add omapdss-base.ko Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 09/30] drm/omap: move dss_initialized to omapdss-base Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 10/30] drm/omap: output: use dev_err instead of DSSERR Tomi Valkeinen
2017-03-29 8:32 ` Laurent Pinchart
2017-03-28 13:07 ` [PATCHv3 11/30] drm/omap: display: don't use dsi_get_pixel_size() Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 12/30] drm/omap: move display, dss-of, output to omapdss-base Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 13/30] drm/omap: move dispc related dss-feat funcs to dispc Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 14/30] drm/omap: add dispc_ops Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 15/30] drm/omap: fill dispc_ops Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 16/30] drm/omap: use dispc_ops Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 17/30] drm/omap: remove all EXPORT_SYMBOLs from dispc.c Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 18/30] drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabled Tomi Valkeinen
2017-03-29 11:46 ` Laurent Pinchart
2017-03-28 13:08 ` [PATCHv3 19/30] drm/omap: fix replication logic Tomi Valkeinen
2017-03-29 11:45 ` Laurent Pinchart
2017-03-28 13:08 ` [PATCHv3 20/30] drm/omap: dss: Functions to check components in the display/output list Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 21/30] drm/omap: dss: Support for detecting display stack readiness Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 22/30] drm/omap: Use omapdss_stack_is_ready() to check that the display stack is up Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 23/30] drm/omap: fix plane update warning when crtc is disabled Tomi Valkeinen
2017-03-29 10:30 ` Laurent Pinchart
2017-03-30 10:28 ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 24/30] drm/omap: display: Add displays in sorted order to the panel_list Tomi Valkeinen
2017-03-29 10:08 ` Laurent Pinchart
2017-03-30 10:58 ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 25/30] drm/omap: poll only connectors where the connect/disconnect can be checked Tomi Valkeinen
2017-03-29 9:26 ` Laurent Pinchart
2017-03-28 13:08 ` [PATCHv3 26/30] drm/omap: displays: panel-dpi: Support for handling backlight devices Tomi Valkeinen
2017-03-29 9:13 ` Laurent Pinchart
2017-03-28 13:08 ` [PATCHv3 27/30] drm/omap: dispc: improve debug print of display flags Tomi Valkeinen
2017-03-29 9:00 ` Laurent Pinchart [this message]
2017-03-29 10:27 ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 28/30] drm/omap: fix display SYNC/DE flags Tomi Valkeinen
2017-03-29 8:58 ` Laurent Pinchart
2017-03-29 10:09 ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 29/30] drm/omap: use drm_atomic_helper_shutdown() Tomi Valkeinen
2017-03-29 8:49 ` Laurent Pinchart
2017-03-29 9:08 ` Tomi Valkeinen
2017-03-29 9:11 ` Laurent Pinchart
2017-03-29 9:22 ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 30/30] drm/omap: fix crash on module unload Tomi Valkeinen
2017-03-29 8:38 ` Laurent Pinchart
2017-03-29 12:09 ` [PATCHv3 00/30] drm/omap: miscallaneous improvements Laurent Pinchart
2017-03-29 14:19 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1699678.sT0gvRgBUH@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jsarha@ti.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox