dri-devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jyri Sarha <jsarha@ti.com>, dri-devel@lists.freedesktop.org
Subject: Re: [PATCHv3 19/30] drm/omap: fix replication logic
Date: Wed, 29 Mar 2017 14:45:22 +0300	[thread overview]
Message-ID: <5942336.yOCr3FY6aY@avalon> (raw)
In-Reply-To: <1490706496-4959-20-git-send-email-tomi.valkeinen@ti.com>

Hi Tomi,

Thank you for the patch.

On Tuesday 28 Mar 2017 16:08:05 Tomi Valkeinen wrote:
> DSS uses "replication logic" to convert color components from smaller
> bit widths to bigger bit widths. Without replication logic, the color
> component would be shifted and the least significant bits would be left
> at 0, whereas with replication logic, the least significat bits will be
> filled with the most significant bit.
> 
> For some reason omapdrm leaves replication logic always to off, which,
> in the most common case, means that showing 16-bit RGB colors on 24-bit
> display gives a bit darker colors than expected.
> 
> The reset value of the replication logic bit is enabled, and it should
> always be set, as there's no practical reason to disable it. This patch
> removes the option to disable it from omapdrm, and always sets it to
> enabled in dispc.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/omapdrm/dss/dispc.c   | 7 ++++---
>  drivers/gpu/drm/omapdrm/dss/omapdss.h | 3 +--
>  drivers/gpu/drm/omapdrm/omap_plane.c  | 2 +-
>  3 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c
> b/drivers/gpu/drm/omapdrm/dss/dispc.c index e9d98046a97f..83241052df6b
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dispc.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
> @@ -2823,11 +2823,12 @@ static int dispc_ovl_setup_common(enum omap_plane
> plane, }
> 
>  static int dispc_ovl_setup(enum omap_plane plane, const struct
> omap_overlay_info *oi, -		bool replication, const struct 
videomode *vm,
> bool mem_to_mem)
> +		const struct videomode *vm, bool mem_to_mem)
>  {
>  	int r;
>  	enum omap_overlay_caps caps = dss_feat_get_overlay_caps(plane);
>  	enum omap_channel channel;
> +	const bool replication = true;
> 
>  	channel = dispc_ovl_get_channel_out(plane);
> 
> @@ -2854,7 +2855,7 @@ int dispc_wb_setup(const struct
> omap_dss_writeback_info *wi, enum omap_plane plane = OMAP_DSS_WB;
>  	const int pos_x = 0, pos_y = 0;
>  	const u8 zorder = 0, global_alpha = 0;
> -	const bool replication = false;
> +	const bool replication = true;
>  	bool truncation;
>  	int in_width = vm->hactive;
>  	int in_height = vm->vactive;
> @@ -4288,7 +4289,7 @@ static void dispc_errata_i734_wa(void)
> 
>  	/* Setup and enable GFX plane */
>  	dispc_ovl_set_channel_out(OMAP_DSS_GFX, OMAP_DSS_CHANNEL_LCD);
> -	dispc_ovl_setup(OMAP_DSS_GFX, &ovli, false, &i734.vm, false);
> +	dispc_ovl_setup(OMAP_DSS_GFX, &ovli, &i734.vm, false);
>  	dispc_ovl_enable(OMAP_DSS_GFX, true);
> 
>  	/* Set up and enable display manager for LCD1 */
> diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h
> b/drivers/gpu/drm/omapdrm/dss/omapdss.h index 3e61f4b2d1ce..4545f1824e66
> 100644
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> @@ -928,8 +928,7 @@ struct dispc_ops {
>  	void (*ovl_set_channel_out)(enum omap_plane plane,
>  			enum omap_channel channel);
>  	int (*ovl_setup)(enum omap_plane plane, const struct omap_overlay_info
> *oi, -			bool replication, const struct videomode *vm,
> -			bool mem_to_mem);
> +			const struct videomode *vm, bool mem_to_mem);
> 
>  	enum omap_color_mode (*ovl_get_color_modes)(enum omap_plane plane);
>  };
> diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c
> b/drivers/gpu/drm/omapdrm/omap_plane.c index bdd74692e0cd..78a92422ede1
> 100644
> --- a/drivers/gpu/drm/omapdrm/omap_plane.c
> +++ b/drivers/gpu/drm/omapdrm/omap_plane.c
> @@ -128,7 +128,7 @@ static void omap_plane_atomic_update(struct drm_plane
> *plane, omap_crtc_channel(state->crtc));
> 
>  	/* and finally, update omapdss: */
> -	ret = priv->dispc_ops->ovl_setup(omap_plane->id, &info, false,
> +	ret = priv->dispc_ops->ovl_setup(omap_plane->id, &info,
>  			      omap_crtc_timings(state->crtc), false);
>  	if (ret) {
>  		dev_err(plane->dev->dev, "Failed to setup plane %s\n",

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2017-03-29 11:44 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-28 13:07 [PATCHv3 00/30] drm/omap: miscallaneous improvements Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 01/30] drm/omap: work-around for errata i886 Tomi Valkeinen
2017-03-29  8:00   ` Laurent Pinchart
2017-03-28 13:07 ` [PATCHv3 02/30] drm/omap: refactor CRTC HW property setup Tomi Valkeinen
2017-03-29  8:05   ` Laurent Pinchart
2017-03-29  8:12     ` Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 03/30] drm/omap: remove divider constraint from hsdiv Tomi Valkeinen
2017-03-29  8:09   ` Laurent Pinchart
2017-03-28 13:07 ` [PATCHv3 04/30] drm/omap: decrease min width & height Tomi Valkeinen
2017-03-29  8:13   ` Laurent Pinchart
2017-03-29  8:23     ` Tomi Valkeinen
2017-03-29  8:24       ` Laurent Pinchart
2017-03-29  8:26         ` Tomi Valkeinen
2017-03-29  8:30           ` Laurent Pinchart
2017-03-29  8:43             ` Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 05/30] drm/omap: improve DPI clock selection on DRA7xx Tomi Valkeinen
2017-03-29  8:19   ` Laurent Pinchart
2017-03-29  8:36     ` Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 06/30] drm/omap: Add support for render nodes Tomi Valkeinen
2017-03-29  8:22   ` Laurent Pinchart
2017-03-29  8:58     ` Tomi Valkeinen
2017-03-29 12:20       ` Laurent Pinchart
2017-03-29 12:51         ` David Herrmann
2017-03-29 21:42           ` Laurent Pinchart
2017-03-30  6:44             ` David Herrmann
2017-03-30  7:43               ` Daniel Vetter
2017-03-28 13:07 ` [PATCHv3 07/30] drm/omap: fix HDMI sync polarities Tomi Valkeinen
2017-03-29  8:26   ` Laurent Pinchart
2017-03-28 13:07 ` [PATCHv3 08/30] drm/omap: add omapdss-base.ko Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 09/30] drm/omap: move dss_initialized to omapdss-base Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 10/30] drm/omap: output: use dev_err instead of DSSERR Tomi Valkeinen
2017-03-29  8:32   ` Laurent Pinchart
2017-03-28 13:07 ` [PATCHv3 11/30] drm/omap: display: don't use dsi_get_pixel_size() Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 12/30] drm/omap: move display, dss-of, output to omapdss-base Tomi Valkeinen
2017-03-28 13:07 ` [PATCHv3 13/30] drm/omap: move dispc related dss-feat funcs to dispc Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 14/30] drm/omap: add dispc_ops Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 15/30] drm/omap: fill dispc_ops Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 16/30] drm/omap: use dispc_ops Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 17/30] drm/omap: remove all EXPORT_SYMBOLs from dispc.c Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 18/30] drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabled Tomi Valkeinen
2017-03-29 11:46   ` Laurent Pinchart
2017-03-28 13:08 ` [PATCHv3 19/30] drm/omap: fix replication logic Tomi Valkeinen
2017-03-29 11:45   ` Laurent Pinchart [this message]
2017-03-28 13:08 ` [PATCHv3 20/30] drm/omap: dss: Functions to check components in the display/output list Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 21/30] drm/omap: dss: Support for detecting display stack readiness Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 22/30] drm/omap: Use omapdss_stack_is_ready() to check that the display stack is up Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 23/30] drm/omap: fix plane update warning when crtc is disabled Tomi Valkeinen
2017-03-29 10:30   ` Laurent Pinchart
2017-03-30 10:28     ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 24/30] drm/omap: display: Add displays in sorted order to the panel_list Tomi Valkeinen
2017-03-29 10:08   ` Laurent Pinchart
2017-03-30 10:58     ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 25/30] drm/omap: poll only connectors where the connect/disconnect can be checked Tomi Valkeinen
2017-03-29  9:26   ` Laurent Pinchart
2017-03-28 13:08 ` [PATCHv3 26/30] drm/omap: displays: panel-dpi: Support for handling backlight devices Tomi Valkeinen
2017-03-29  9:13   ` Laurent Pinchart
2017-03-28 13:08 ` [PATCHv3 27/30] drm/omap: dispc: improve debug print of display flags Tomi Valkeinen
2017-03-29  9:00   ` Laurent Pinchart
2017-03-29 10:27     ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 28/30] drm/omap: fix display SYNC/DE flags Tomi Valkeinen
2017-03-29  8:58   ` Laurent Pinchart
2017-03-29 10:09     ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 29/30] drm/omap: use drm_atomic_helper_shutdown() Tomi Valkeinen
2017-03-29  8:49   ` Laurent Pinchart
2017-03-29  9:08     ` Tomi Valkeinen
2017-03-29  9:11       ` Laurent Pinchart
2017-03-29  9:22         ` Tomi Valkeinen
2017-03-28 13:08 ` [PATCHv3 30/30] drm/omap: fix crash on module unload Tomi Valkeinen
2017-03-29  8:38   ` Laurent Pinchart
2017-03-29 12:09 ` [PATCHv3 00/30] drm/omap: miscallaneous improvements Laurent Pinchart
2017-03-29 14:19   ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5942336.yOCr3FY6aY@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jsarha@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox