Linux kernel and device drivers for NXP i.MX platforms
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	 Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	 Fabio Estevam <festevam@gmail.com>, Frank Li <Frank.Li@nxp.com>,
	 Rui Miguel Silva <rmfrfs@gmail.com>,
	Martin Kepplinger <martink@posteo.de>,
	 Purism Kernel Team <kernel@puri.sm>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	 imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org,
	Robert Chiras <robert.chiras@nxp.com>,
	 "Guoniu.zhou" <guoniu.zhou@nxp.com>
Subject: [PATCH v4 08/13] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings
Date: Tue, 08 Apr 2025 17:53:06 -0400	[thread overview]
Message-ID: <20250408-8qxp_camera-v4-8-ef695f1b47c4@nxp.com> (raw)
In-Reply-To: <20250408-8qxp_camera-v4-0-ef695f1b47c4@nxp.com>

From: Robert Chiras <robert.chiras@nxp.com>

Add compatible strings for i.MX8QM/i.MX8QXP platform. Remove
fsl,mipi-phy-gpr from required properties and add new reg space, since
i.MX8QM and i.MX8QXP use dedicate control and status register(csr) space.

Keep the same restriction for other compatible strings.

Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v3 to v4
- use MIPI CSI-2
- Add Laurent Pinchart reviewed-by tags. Reset description is not very
accurate, but it should be good enough since use SCU reset. SCU reset do
reset for PHY and controller.

change from v2 to v3
- use dedicate csr register space
change from v1 to v2
- remove internal review tags
- remove reg maxitems:1
- remove 8ulp part
- add 8qxp compatible string and make 8qm failback to 8qxp
- limit reset and power domain number to 1 for 8qxp and 8qm
- remove power-domains change because 8qm/8qxp only need 1 power domain
---
 .../bindings/media/nxp,imx8mq-mipi-csi2.yaml       | 38 +++++++++++++++++++---
 1 file changed, 34 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 2a14e3b0e0040..3389bab266a9a 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -16,11 +16,19 @@ description: |-
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mq-mipi-csi2
+    oneOf:
+      - enum:
+          - fsl,imx8mq-mipi-csi2
+          - fsl,imx8qxp-mipi-csi2
+      - items:
+          - const: fsl,imx8qm-mipi-csi2
+          - const: fsl,imx8qxp-mipi-csi2
 
   reg:
-    maxItems: 1
+    items:
+      - description: MIPI CSI-2 RX host controller register.
+      - description: MIPI CSI-2 control and status register (csr).
+    minItems: 1
 
   clocks:
     items:
@@ -46,6 +54,7 @@ properties:
       - description: CORE_RESET reset register bit definition
       - description: PHY_REF_RESET reset register bit definition
       - description: ESC_RESET reset register bit definition
+    minItems: 1
 
   fsl,mipi-phy-gpr:
     description: |
@@ -113,9 +122,30 @@ required:
   - clock-names
   - power-domains
   - resets
-  - fsl,mipi-phy-gpr
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-mipi-csi2
+    then:
+      properties:
+        reg:
+          minItems: 2
+        resets:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          maxItems: 1
+        resets:
+          minItems: 3
+      required:
+        - fsl,mipi-phy-gpr
+
 additionalProperties: false
 
 examples:

-- 
2.34.1


  parent reply	other threads:[~2025-04-08 21:54 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-08 21:52 [PATCH v4 00/13] media: imx8: add camera support Frank Li
2025-04-08 21:52 ` [PATCH v4 01/13] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI Frank Li
2025-04-08 21:53 ` [PATCH v4 02/13] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink Frank Li
2025-04-08 21:53 ` [PATCH v4 03/13] media: nxp: imx8-isi: Remove unused offset in mxc_isi_reg and use BIT() macro for mask Frank Li
2025-04-21 21:06   ` Laurent Pinchart
2025-05-02  0:53     ` Frank Li
2025-05-02 15:25       ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 04/13] media: nxp: imx8-isi: Use devm_clk_bulk_get_all() to fetch clocks Frank Li
2025-04-21 21:14   ` Laurent Pinchart
2025-05-02  1:02     ` Frank Li
2025-05-02 15:57       ` Laurent Pinchart
2025-05-08 12:35         ` Frank Li
2025-06-11 14:14           ` Laurent Pinchart
2025-06-17 14:11             ` Rob Herring
2025-06-17 14:29               ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 05/13] media: nxp: imx8-isi: Remove redundant check for dma_set_mask_and_coherent() Frank Li
2025-04-21 21:19   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 06/13] media: nxp: imx8-isi: Use dev_err_probe() simplify code Frank Li
2025-04-21 21:21   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 07/13] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP Frank Li
2025-04-21 21:32   ` Laurent Pinchart
2025-04-08 21:53 ` Frank Li [this message]
2025-04-08 21:53 ` [PATCH v4 09/13] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different compatible strings Frank Li
2025-04-08 21:53 ` [PATCH v4 10/13] media: imx8mq-mipi-csi2: Add support for i.MX8QXP Frank Li
2025-04-21 21:41   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 11/13] arm64: dts: imx8: add capture controller for i.MX8's img subsystem Frank Li
2025-04-21 21:46   ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 12/13] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek Frank Li
2025-04-08 21:53 ` [PATCH v4 13/13] arm64: dts: imx8q: add camera ov5640 support " Frank Li
2025-04-21 18:44 ` [PATCH v4 00/13] media: imx8: add camera support Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250408-8qxp_camera-v4-8-ef695f1b47c4@nxp.com \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=guoniu.zhou@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=kernel@puri.sm \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=martink@posteo.de \
    --cc=mchehab@kernel.org \
    --cc=rmfrfs@gmail.com \
    --cc=robert.chiras@nxp.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox