From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Frank Li <Frank.Li@nxp.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Rui Miguel Silva <rmfrfs@gmail.com>,
Martin Kepplinger <martink@posteo.de>,
Purism Kernel Team <kernel@puri.sm>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Robert Chiras <robert.chiras@nxp.com>,
"Guoniu.zhou" <guoniu.zhou@nxp.com>
Subject: Re: [PATCH v4 07/13] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP
Date: Tue, 22 Apr 2025 00:32:01 +0300 [thread overview]
Message-ID: <20250421213201.GQ17813@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20250408-8qxp_camera-v4-7-ef695f1b47c4@nxp.com>
Hi Frank,
Thank you for the patch.
On Tue, Apr 08, 2025 at 05:53:05PM -0400, Frank Li wrote:
> From: Robert Chiras <robert.chiras@nxp.com>
>
> Add compatibles and platform data for i.MX8QM and i.MX8QXP platforms.
> i.MX8QM's IER register layout is difference with i.MX8QXP.
>
> Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Change from v3 to v4
> - fix i.MX8QMP ier register layout
> - Remove clk-names array
> - Change 8QXP channel number to 6
>
> change from v2 to v3
> - none
>
> change from v1 to v2
> - remove intenal review tags
> ---
> .../media/platform/nxp/imx8-isi/imx8-isi-core.c | 43 +++++++++++++++++++++-
> .../media/platform/nxp/imx8-isi/imx8-isi-core.h | 2 +
> 2 files changed, 43 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> index 398cc03443be3..568d7b24466aa 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.c
> @@ -246,7 +246,7 @@ static void mxc_isi_v4l2_cleanup(struct mxc_isi_dev *isi)
>
> /* Panic will assert when the buffers are 50% full */
>
> -/* For i.MX8QXP C0 and i.MX8MN ISI IER version */
> +/* For i.MX8MN ISI IER version */
> static const struct mxc_isi_ier_reg mxc_imx8_isi_ier_v1 = {
> .oflw_y_buf_en = { .mask = BIT(19) },
> .oflw_u_buf_en = { .mask = BIT(21) },
> @@ -257,7 +257,7 @@ static const struct mxc_isi_ier_reg mxc_imx8_isi_ier_v1 = {
> .panic_v_buf_en = { .mask = BIT(24) },
> };
>
> -/* For i.MX8MP ISI IER version */
> +/* For i.MX8QXP C0 and i.MX8MP ISI IER version */
> static const struct mxc_isi_ier_reg mxc_imx8_isi_ier_v2 = {
> .oflw_y_buf_en = { .mask = BIT(18) },
> .oflw_u_buf_en = { .mask = BIT(20) },
> @@ -268,6 +268,21 @@ static const struct mxc_isi_ier_reg mxc_imx8_isi_ier_v2 = {
> .panic_v_buf_en = { .mask = BIT(23) },
> };
>
> +/* For i.MX8QM ISI IER version */
> +static const struct mxc_isi_ier_reg mxc_imx8_isi_ier_qm = {
> + .oflw_y_buf_en = { .mask = BIT(16) },
> + .oflw_u_buf_en = { .mask = BIT(19) },
> + .oflw_v_buf_en = { .mask = BIT(22) },
> +
> + .excs_oflw_y_buf_en = { .mask = BIT(17) },
> + .excs_oflw_u_buf_en = { .mask = BIT(20) },
> + .excs_oflw_v_buf_en = { .mask = BIT(23) },
> +
> + .panic_y_buf_en = { .mask = BIT(18) },
> + .panic_u_buf_en = { .mask = BIT(21) },
> + .panic_v_buf_en = { .mask = BIT(24) },
> +};
> +
> /* Panic will assert when the buffers are 50% full */
> static const struct mxc_isi_set_thd mxc_imx8_isi_thd_v1 = {
> .panic_set_thd_y = { .mask = 0x0000f, .offset = 0, .threshold = 0x7 },
> @@ -322,6 +337,28 @@ static const struct mxc_isi_plat_data mxc_imx93_data = {
> .has_36bit_dma = false,
> };
>
> +static const struct mxc_isi_plat_data mxc_imx8qm_data = {
> + .model = MXC_ISI_IMX8QM,
> + .num_ports = 5,
> + .num_channels = 8,
> + .reg_offset = 0x10000,
> + .ier_reg = &mxc_imx8_isi_ier_qm,
> + .set_thd = &mxc_imx8_isi_thd_v1,
> + .buf_active_reverse = true,
> + .has_36bit_dma = false,
> +};
> +
> +static const struct mxc_isi_plat_data mxc_imx8qxp_data = {
> + .model = MXC_ISI_IMX8QXP,
> + .num_ports = 5,
> + .num_channels = 6,
> + .reg_offset = 0x10000,
> + .ier_reg = &mxc_imx8_isi_ier_v2,
> + .set_thd = &mxc_imx8_isi_thd_v1,
> + .buf_active_reverse = true,
> + .has_36bit_dma = false,
> +};
> +
> /* -----------------------------------------------------------------------------
> * Power management
> */
> @@ -497,6 +534,8 @@ static void mxc_isi_remove(struct platform_device *pdev)
> static const struct of_device_id mxc_isi_of_match[] = {
> { .compatible = "fsl,imx8mn-isi", .data = &mxc_imx8mn_data },
> { .compatible = "fsl,imx8mp-isi", .data = &mxc_imx8mp_data },
> + { .compatible = "fsl,imx8qm-isi", .data = &mxc_imx8qm_data },
> + { .compatible = "fsl,imx8qxp-isi", .data = &mxc_imx8qxp_data },
> { .compatible = "fsl,imx8ulp-isi", .data = &mxc_imx8ulp_data },
> { .compatible = "fsl,imx93-isi", .data = &mxc_imx93_data },
> { /* sentinel */ },
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> index bd3cfe5fbe063..206995bedca4a 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> @@ -157,6 +157,8 @@ struct mxc_gasket_ops {
> enum model {
> MXC_ISI_IMX8MN,
> MXC_ISI_IMX8MP,
> + MXC_ISI_IMX8QM,
> + MXC_ISI_IMX8QXP,
> MXC_ISI_IMX8ULP,
> MXC_ISI_IMX93,
> };
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2025-04-21 21:32 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-08 21:52 [PATCH v4 00/13] media: imx8: add camera support Frank Li
2025-04-08 21:52 ` [PATCH v4 01/13] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI Frank Li
2025-04-08 21:53 ` [PATCH v4 02/13] media: nxp: imx8-isi: Allow num_sources to be greater than num_sink Frank Li
2025-04-08 21:53 ` [PATCH v4 03/13] media: nxp: imx8-isi: Remove unused offset in mxc_isi_reg and use BIT() macro for mask Frank Li
2025-04-21 21:06 ` Laurent Pinchart
2025-05-02 0:53 ` Frank Li
2025-05-02 15:25 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 04/13] media: nxp: imx8-isi: Use devm_clk_bulk_get_all() to fetch clocks Frank Li
2025-04-21 21:14 ` Laurent Pinchart
2025-05-02 1:02 ` Frank Li
2025-05-02 15:57 ` Laurent Pinchart
2025-05-08 12:35 ` Frank Li
2025-06-11 14:14 ` Laurent Pinchart
2025-06-17 14:11 ` Rob Herring
2025-06-17 14:29 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 05/13] media: nxp: imx8-isi: Remove redundant check for dma_set_mask_and_coherent() Frank Li
2025-04-21 21:19 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 06/13] media: nxp: imx8-isi: Use dev_err_probe() simplify code Frank Li
2025-04-21 21:21 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 07/13] media: imx8-isi: Add support for i.MX8QM and i.MX8QXP Frank Li
2025-04-21 21:32 ` Laurent Pinchart [this message]
2025-04-08 21:53 ` [PATCH v4 08/13] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8QM(QXP) compatible strings Frank Li
2025-04-08 21:53 ` [PATCH v4 09/13] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different " Frank Li
2025-04-08 21:53 ` [PATCH v4 10/13] media: imx8mq-mipi-csi2: Add support for i.MX8QXP Frank Li
2025-04-21 21:41 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 11/13] arm64: dts: imx8: add capture controller for i.MX8's img subsystem Frank Li
2025-04-21 21:46 ` Laurent Pinchart
2025-04-08 21:53 ` [PATCH v4 12/13] arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek Frank Li
2025-04-08 21:53 ` [PATCH v4 13/13] arm64: dts: imx8q: add camera ov5640 support " Frank Li
2025-04-21 18:44 ` [PATCH v4 00/13] media: imx8: add camera support Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250421213201.GQ17813@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=guoniu.zhou@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=kernel@puri.sm \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martink@posteo.de \
--cc=mchehab@kernel.org \
--cc=rmfrfs@gmail.com \
--cc=robert.chiras@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox